xref: /openbmc/linux/drivers/watchdog/imgpdc_wdt.c (revision 6c8c1406)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Imagination Technologies PowerDown Controller Watchdog Timer.
4  *
5  * Copyright (c) 2014 Imagination Technologies Ltd.
6  *
7  * Based on drivers/watchdog/sunxi_wdt.c Copyright (c) 2013 Carlo Caione
8  *                                                     2012 Henrik Nordstrom
9  *
10  * Notes
11  * -----
12  * The timeout value is rounded to the next power of two clock cycles.
13  * This is configured using the PDC_WDT_CONFIG register, according to this
14  * formula:
15  *
16  *     timeout = 2^(delay + 1) clock cycles
17  *
18  * Where 'delay' is the value written in PDC_WDT_CONFIG register.
19  *
20  * Therefore, the hardware only allows to program watchdog timeouts, expressed
21  * as a power of two number of watchdog clock cycles. The current implementation
22  * guarantees that the actual watchdog timeout will be _at least_ the value
23  * programmed in the imgpdg_wdt driver.
24  *
25  * The following table shows how the user-configured timeout relates
26  * to the actual hardware timeout (watchdog clock @ 40000 Hz):
27  *
28  * input timeout | WD_DELAY | actual timeout
29  * -----------------------------------
30  *      10       |   18     |  13 seconds
31  *      20       |   19     |  26 seconds
32  *      30       |   20     |  52 seconds
33  *      60       |   21     |  104 seconds
34  *
35  * Albeit coarse, this granularity would suffice most watchdog uses.
36  * If the platform allows it, the user should be able to change the watchdog
37  * clock rate and achieve a finer timeout granularity.
38  */
39 
40 #include <linux/clk.h>
41 #include <linux/io.h>
42 #include <linux/log2.h>
43 #include <linux/module.h>
44 #include <linux/mod_devicetable.h>
45 #include <linux/platform_device.h>
46 #include <linux/slab.h>
47 #include <linux/watchdog.h>
48 
49 /* registers */
50 #define PDC_WDT_SOFT_RESET		0x00
51 #define PDC_WDT_CONFIG			0x04
52   #define PDC_WDT_CONFIG_ENABLE		BIT(31)
53   #define PDC_WDT_CONFIG_DELAY_MASK	0x1f
54 
55 #define PDC_WDT_TICKLE1			0x08
56 #define PDC_WDT_TICKLE1_MAGIC		0xabcd1234
57 #define PDC_WDT_TICKLE2			0x0c
58 #define PDC_WDT_TICKLE2_MAGIC		0x4321dcba
59 
60 #define PDC_WDT_TICKLE_STATUS_MASK	0x7
61 #define PDC_WDT_TICKLE_STATUS_SHIFT	0
62 #define PDC_WDT_TICKLE_STATUS_HRESET	0x0  /* Hard reset */
63 #define PDC_WDT_TICKLE_STATUS_TIMEOUT	0x1  /* Timeout */
64 #define PDC_WDT_TICKLE_STATUS_TICKLE	0x2  /* Tickled incorrectly */
65 #define PDC_WDT_TICKLE_STATUS_SRESET	0x3  /* Soft reset */
66 #define PDC_WDT_TICKLE_STATUS_USER	0x4  /* User reset */
67 
68 /* Timeout values are in seconds */
69 #define PDC_WDT_MIN_TIMEOUT		1
70 #define PDC_WDT_DEF_TIMEOUT		64
71 
72 static int heartbeat;
73 module_param(heartbeat, int, 0);
74 MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds "
75 	"(default=" __MODULE_STRING(PDC_WDT_DEF_TIMEOUT) ")");
76 
77 static bool nowayout = WATCHDOG_NOWAYOUT;
78 module_param(nowayout, bool, 0);
79 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
80 	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
81 
82 struct pdc_wdt_dev {
83 	struct watchdog_device wdt_dev;
84 	struct clk *wdt_clk;
85 	struct clk *sys_clk;
86 	void __iomem *base;
87 };
88 
89 static int pdc_wdt_keepalive(struct watchdog_device *wdt_dev)
90 {
91 	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
92 
93 	writel(PDC_WDT_TICKLE1_MAGIC, wdt->base + PDC_WDT_TICKLE1);
94 	writel(PDC_WDT_TICKLE2_MAGIC, wdt->base + PDC_WDT_TICKLE2);
95 
96 	return 0;
97 }
98 
99 static int pdc_wdt_stop(struct watchdog_device *wdt_dev)
100 {
101 	unsigned int val;
102 	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
103 
104 	val = readl(wdt->base + PDC_WDT_CONFIG);
105 	val &= ~PDC_WDT_CONFIG_ENABLE;
106 	writel(val, wdt->base + PDC_WDT_CONFIG);
107 
108 	/* Must tickle to finish the stop */
109 	pdc_wdt_keepalive(wdt_dev);
110 
111 	return 0;
112 }
113 
114 static void __pdc_wdt_set_timeout(struct pdc_wdt_dev *wdt)
115 {
116 	unsigned long clk_rate = clk_get_rate(wdt->wdt_clk);
117 	unsigned int val;
118 
119 	val = readl(wdt->base + PDC_WDT_CONFIG) & ~PDC_WDT_CONFIG_DELAY_MASK;
120 	val |= order_base_2(wdt->wdt_dev.timeout * clk_rate) - 1;
121 	writel(val, wdt->base + PDC_WDT_CONFIG);
122 }
123 
124 static int pdc_wdt_set_timeout(struct watchdog_device *wdt_dev,
125 			       unsigned int new_timeout)
126 {
127 	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
128 
129 	wdt->wdt_dev.timeout = new_timeout;
130 
131 	__pdc_wdt_set_timeout(wdt);
132 
133 	return 0;
134 }
135 
136 /* Start the watchdog timer (delay should already be set) */
137 static int pdc_wdt_start(struct watchdog_device *wdt_dev)
138 {
139 	unsigned int val;
140 	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
141 
142 	__pdc_wdt_set_timeout(wdt);
143 
144 	val = readl(wdt->base + PDC_WDT_CONFIG);
145 	val |= PDC_WDT_CONFIG_ENABLE;
146 	writel(val, wdt->base + PDC_WDT_CONFIG);
147 
148 	return 0;
149 }
150 
151 static int pdc_wdt_restart(struct watchdog_device *wdt_dev,
152 			   unsigned long action, void *data)
153 {
154 	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
155 
156 	/* Assert SOFT_RESET */
157 	writel(0x1, wdt->base + PDC_WDT_SOFT_RESET);
158 
159 	return 0;
160 }
161 
162 static const struct watchdog_info pdc_wdt_info = {
163 	.identity	= "IMG PDC Watchdog",
164 	.options	= WDIOF_SETTIMEOUT |
165 			  WDIOF_KEEPALIVEPING |
166 			  WDIOF_MAGICCLOSE,
167 };
168 
169 static const struct watchdog_ops pdc_wdt_ops = {
170 	.owner		= THIS_MODULE,
171 	.start		= pdc_wdt_start,
172 	.stop		= pdc_wdt_stop,
173 	.ping		= pdc_wdt_keepalive,
174 	.set_timeout	= pdc_wdt_set_timeout,
175 	.restart        = pdc_wdt_restart,
176 };
177 
178 static void pdc_clk_disable_unprepare(void *data)
179 {
180 	clk_disable_unprepare(data);
181 }
182 
183 static int pdc_wdt_probe(struct platform_device *pdev)
184 {
185 	struct device *dev = &pdev->dev;
186 	u64 div;
187 	int ret, val;
188 	unsigned long clk_rate;
189 	struct pdc_wdt_dev *pdc_wdt;
190 
191 	pdc_wdt = devm_kzalloc(dev, sizeof(*pdc_wdt), GFP_KERNEL);
192 	if (!pdc_wdt)
193 		return -ENOMEM;
194 
195 	pdc_wdt->base = devm_platform_ioremap_resource(pdev, 0);
196 	if (IS_ERR(pdc_wdt->base))
197 		return PTR_ERR(pdc_wdt->base);
198 
199 	pdc_wdt->sys_clk = devm_clk_get(dev, "sys");
200 	if (IS_ERR(pdc_wdt->sys_clk)) {
201 		dev_err(dev, "failed to get the sys clock\n");
202 		return PTR_ERR(pdc_wdt->sys_clk);
203 	}
204 
205 	pdc_wdt->wdt_clk = devm_clk_get(dev, "wdt");
206 	if (IS_ERR(pdc_wdt->wdt_clk)) {
207 		dev_err(dev, "failed to get the wdt clock\n");
208 		return PTR_ERR(pdc_wdt->wdt_clk);
209 	}
210 
211 	ret = clk_prepare_enable(pdc_wdt->sys_clk);
212 	if (ret) {
213 		dev_err(dev, "could not prepare or enable sys clock\n");
214 		return ret;
215 	}
216 	ret = devm_add_action_or_reset(dev, pdc_clk_disable_unprepare,
217 				       pdc_wdt->sys_clk);
218 	if (ret)
219 		return ret;
220 
221 	ret = clk_prepare_enable(pdc_wdt->wdt_clk);
222 	if (ret) {
223 		dev_err(dev, "could not prepare or enable wdt clock\n");
224 		return ret;
225 	}
226 	ret = devm_add_action_or_reset(dev, pdc_clk_disable_unprepare,
227 				       pdc_wdt->wdt_clk);
228 	if (ret)
229 		return ret;
230 
231 	/* We use the clock rate to calculate the max timeout */
232 	clk_rate = clk_get_rate(pdc_wdt->wdt_clk);
233 	if (clk_rate == 0) {
234 		dev_err(dev, "failed to get clock rate\n");
235 		return -EINVAL;
236 	}
237 
238 	if (order_base_2(clk_rate) > PDC_WDT_CONFIG_DELAY_MASK + 1) {
239 		dev_err(dev, "invalid clock rate\n");
240 		return -EINVAL;
241 	}
242 
243 	if (order_base_2(clk_rate) == 0)
244 		pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT + 1;
245 	else
246 		pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT;
247 
248 	pdc_wdt->wdt_dev.info = &pdc_wdt_info;
249 	pdc_wdt->wdt_dev.ops = &pdc_wdt_ops;
250 
251 	div = 1ULL << (PDC_WDT_CONFIG_DELAY_MASK + 1);
252 	do_div(div, clk_rate);
253 	pdc_wdt->wdt_dev.max_timeout = div;
254 	pdc_wdt->wdt_dev.timeout = PDC_WDT_DEF_TIMEOUT;
255 	pdc_wdt->wdt_dev.parent = dev;
256 	watchdog_set_drvdata(&pdc_wdt->wdt_dev, pdc_wdt);
257 
258 	watchdog_init_timeout(&pdc_wdt->wdt_dev, heartbeat, dev);
259 
260 	pdc_wdt_stop(&pdc_wdt->wdt_dev);
261 
262 	/* Find what caused the last reset */
263 	val = readl(pdc_wdt->base + PDC_WDT_TICKLE1);
264 	val = (val & PDC_WDT_TICKLE_STATUS_MASK) >> PDC_WDT_TICKLE_STATUS_SHIFT;
265 	switch (val) {
266 	case PDC_WDT_TICKLE_STATUS_TICKLE:
267 	case PDC_WDT_TICKLE_STATUS_TIMEOUT:
268 		pdc_wdt->wdt_dev.bootstatus |= WDIOF_CARDRESET;
269 		dev_info(dev, "watchdog module last reset due to timeout\n");
270 		break;
271 	case PDC_WDT_TICKLE_STATUS_HRESET:
272 		dev_info(dev,
273 			 "watchdog module last reset due to hard reset\n");
274 		break;
275 	case PDC_WDT_TICKLE_STATUS_SRESET:
276 		dev_info(dev,
277 			 "watchdog module last reset due to soft reset\n");
278 		break;
279 	case PDC_WDT_TICKLE_STATUS_USER:
280 		dev_info(dev,
281 			 "watchdog module last reset due to user reset\n");
282 		break;
283 	default:
284 		dev_info(dev, "contains an illegal status code (%08x)\n", val);
285 		break;
286 	}
287 
288 	watchdog_set_nowayout(&pdc_wdt->wdt_dev, nowayout);
289 	watchdog_set_restart_priority(&pdc_wdt->wdt_dev, 128);
290 
291 	platform_set_drvdata(pdev, pdc_wdt);
292 
293 	watchdog_stop_on_reboot(&pdc_wdt->wdt_dev);
294 	watchdog_stop_on_unregister(&pdc_wdt->wdt_dev);
295 	return devm_watchdog_register_device(dev, &pdc_wdt->wdt_dev);
296 }
297 
298 static const struct of_device_id pdc_wdt_match[] = {
299 	{ .compatible = "img,pdc-wdt" },
300 	{}
301 };
302 MODULE_DEVICE_TABLE(of, pdc_wdt_match);
303 
304 static struct platform_driver pdc_wdt_driver = {
305 	.driver = {
306 		.name = "imgpdc-wdt",
307 		.of_match_table	= pdc_wdt_match,
308 	},
309 	.probe = pdc_wdt_probe,
310 };
311 module_platform_driver(pdc_wdt_driver);
312 
313 MODULE_AUTHOR("Jude Abraham <Jude.Abraham@imgtec.com>");
314 MODULE_AUTHOR("Naidu Tellapati <Naidu.Tellapati@imgtec.com>");
315 MODULE_DESCRIPTION("Imagination Technologies PDC Watchdog Timer Driver");
316 MODULE_LICENSE("GPL v2");
317