1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * intel TCO Watchdog Driver 4 * 5 * (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>. 6 * 7 * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor 8 * provide warranty for any of this software. This material is 9 * provided "AS-IS" and at no charge. 10 * 11 * The TCO watchdog is implemented in the following I/O controller hubs: 12 * (See the intel documentation on http://developer.intel.com.) 13 * document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO) 14 * document number 290687-002, 298242-027: 82801BA (ICH2) 15 * document number 290733-003, 290739-013: 82801CA (ICH3-S) 16 * document number 290716-001, 290718-007: 82801CAM (ICH3-M) 17 * document number 290744-001, 290745-025: 82801DB (ICH4) 18 * document number 252337-001, 252663-008: 82801DBM (ICH4-M) 19 * document number 273599-001, 273645-002: 82801E (C-ICH) 20 * document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R) 21 * document number 300641-004, 300884-013: 6300ESB 22 * document number 301473-002, 301474-026: 82801F (ICH6) 23 * document number 313082-001, 313075-006: 631xESB, 632xESB 24 * document number 307013-003, 307014-024: 82801G (ICH7) 25 * document number 322896-001, 322897-001: NM10 26 * document number 313056-003, 313057-017: 82801H (ICH8) 27 * document number 316972-004, 316973-012: 82801I (ICH9) 28 * document number 319973-002, 319974-002: 82801J (ICH10) 29 * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH) 30 * document number 320066-003, 320257-008: EP80597 (IICH) 31 * document number 324645-001, 324646-001: Cougar Point (CPT) 32 * document number TBD : Patsburg (PBG) 33 * document number TBD : DH89xxCC 34 * document number TBD : Panther Point 35 * document number TBD : Lynx Point 36 * document number TBD : Lynx Point-LP 37 */ 38 39 /* 40 * Includes, defines, variables, module parameters, ... 41 */ 42 43 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 44 45 /* Module and version information */ 46 #define DRV_NAME "iTCO_wdt" 47 #define DRV_VERSION "1.11" 48 49 /* Includes */ 50 #include <linux/acpi.h> /* For ACPI support */ 51 #include <linux/bits.h> /* For BIT() */ 52 #include <linux/module.h> /* For module specific items */ 53 #include <linux/moduleparam.h> /* For new moduleparam's */ 54 #include <linux/types.h> /* For standard types (like size_t) */ 55 #include <linux/errno.h> /* For the -ENODEV/... values */ 56 #include <linux/kernel.h> /* For printk/panic/... */ 57 #include <linux/watchdog.h> /* For the watchdog specific items */ 58 #include <linux/init.h> /* For __init/__exit/... */ 59 #include <linux/fs.h> /* For file operations */ 60 #include <linux/platform_device.h> /* For platform_driver framework */ 61 #include <linux/pci.h> /* For pci functions */ 62 #include <linux/ioport.h> /* For io-port access */ 63 #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ 64 #include <linux/uaccess.h> /* For copy_to_user/put_user/... */ 65 #include <linux/io.h> /* For inb/outb/... */ 66 #include <linux/platform_data/itco_wdt.h> 67 68 #include "iTCO_vendor.h" 69 70 /* Address definitions for the TCO */ 71 /* TCO base address */ 72 #define TCOBASE(p) ((p)->tco_res->start) 73 /* SMI Control and Enable Register */ 74 #define SMI_EN(p) ((p)->smi_res->start) 75 76 #define TCO_RLD(p) (TCOBASE(p) + 0x00) /* TCO Timer Reload/Curr. Value */ 77 #define TCOv1_TMR(p) (TCOBASE(p) + 0x01) /* TCOv1 Timer Initial Value*/ 78 #define TCO_DAT_IN(p) (TCOBASE(p) + 0x02) /* TCO Data In Register */ 79 #define TCO_DAT_OUT(p) (TCOBASE(p) + 0x03) /* TCO Data Out Register */ 80 #define TCO1_STS(p) (TCOBASE(p) + 0x04) /* TCO1 Status Register */ 81 #define TCO2_STS(p) (TCOBASE(p) + 0x06) /* TCO2 Status Register */ 82 #define TCO1_CNT(p) (TCOBASE(p) + 0x08) /* TCO1 Control Register */ 83 #define TCO2_CNT(p) (TCOBASE(p) + 0x0a) /* TCO2 Control Register */ 84 #define TCOv2_TMR(p) (TCOBASE(p) + 0x12) /* TCOv2 Timer Initial Value*/ 85 86 /* internal variables */ 87 struct iTCO_wdt_private { 88 struct watchdog_device wddev; 89 90 /* TCO version/generation */ 91 unsigned int iTCO_version; 92 struct resource *tco_res; 93 struct resource *smi_res; 94 /* 95 * NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2), 96 * or memory-mapped PMC register bit 4 (TCO version 3). 97 */ 98 struct resource *gcs_pmc_res; 99 unsigned long __iomem *gcs_pmc; 100 /* the lock for io operations */ 101 spinlock_t io_lock; 102 /* the PCI-device */ 103 struct pci_dev *pci_dev; 104 /* whether or not the watchdog has been suspended */ 105 bool suspended; 106 /* no reboot API private data */ 107 void *no_reboot_priv; 108 /* no reboot update function pointer */ 109 int (*update_no_reboot_bit)(void *p, bool set); 110 }; 111 112 /* module parameters */ 113 #define WATCHDOG_TIMEOUT 30 /* 30 sec default heartbeat */ 114 static int heartbeat = WATCHDOG_TIMEOUT; /* in seconds */ 115 module_param(heartbeat, int, 0); 116 MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. " 117 "5..76 (TCO v1) or 3..614 (TCO v2), default=" 118 __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); 119 120 static bool nowayout = WATCHDOG_NOWAYOUT; 121 module_param(nowayout, bool, 0); 122 MODULE_PARM_DESC(nowayout, 123 "Watchdog cannot be stopped once started (default=" 124 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); 125 126 static int turn_SMI_watchdog_clear_off = 1; 127 module_param(turn_SMI_watchdog_clear_off, int, 0); 128 MODULE_PARM_DESC(turn_SMI_watchdog_clear_off, 129 "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)"); 130 131 /* 132 * Some TCO specific functions 133 */ 134 135 /* 136 * The iTCO v1 and v2's internal timer is stored as ticks which decrement 137 * every 0.6 seconds. v3's internal timer is stored as seconds (some 138 * datasheets incorrectly state 0.6 seconds). 139 */ 140 static inline unsigned int seconds_to_ticks(struct iTCO_wdt_private *p, 141 int secs) 142 { 143 return p->iTCO_version == 3 ? secs : (secs * 10) / 6; 144 } 145 146 static inline unsigned int ticks_to_seconds(struct iTCO_wdt_private *p, 147 int ticks) 148 { 149 return p->iTCO_version == 3 ? ticks : (ticks * 6) / 10; 150 } 151 152 static inline u32 no_reboot_bit(struct iTCO_wdt_private *p) 153 { 154 u32 enable_bit; 155 156 switch (p->iTCO_version) { 157 case 5: 158 case 3: 159 enable_bit = 0x00000010; 160 break; 161 case 2: 162 enable_bit = 0x00000020; 163 break; 164 case 4: 165 case 1: 166 default: 167 enable_bit = 0x00000002; 168 break; 169 } 170 171 return enable_bit; 172 } 173 174 static int update_no_reboot_bit_def(void *priv, bool set) 175 { 176 return 0; 177 } 178 179 static int update_no_reboot_bit_pci(void *priv, bool set) 180 { 181 struct iTCO_wdt_private *p = priv; 182 u32 val32 = 0, newval32 = 0; 183 184 pci_read_config_dword(p->pci_dev, 0xd4, &val32); 185 if (set) 186 val32 |= no_reboot_bit(p); 187 else 188 val32 &= ~no_reboot_bit(p); 189 pci_write_config_dword(p->pci_dev, 0xd4, val32); 190 pci_read_config_dword(p->pci_dev, 0xd4, &newval32); 191 192 /* make sure the update is successful */ 193 if (val32 != newval32) 194 return -EIO; 195 196 return 0; 197 } 198 199 static int update_no_reboot_bit_mem(void *priv, bool set) 200 { 201 struct iTCO_wdt_private *p = priv; 202 u32 val32 = 0, newval32 = 0; 203 204 val32 = readl(p->gcs_pmc); 205 if (set) 206 val32 |= no_reboot_bit(p); 207 else 208 val32 &= ~no_reboot_bit(p); 209 writel(val32, p->gcs_pmc); 210 newval32 = readl(p->gcs_pmc); 211 212 /* make sure the update is successful */ 213 if (val32 != newval32) 214 return -EIO; 215 216 return 0; 217 } 218 219 static int update_no_reboot_bit_cnt(void *priv, bool set) 220 { 221 struct iTCO_wdt_private *p = priv; 222 u16 val, newval; 223 224 val = inw(TCO1_CNT(p)); 225 if (set) 226 val |= BIT(0); 227 else 228 val &= ~BIT(0); 229 outw(val, TCO1_CNT(p)); 230 newval = inw(TCO1_CNT(p)); 231 232 /* make sure the update is successful */ 233 return val != newval ? -EIO : 0; 234 } 235 236 static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p, 237 struct itco_wdt_platform_data *pdata) 238 { 239 if (pdata->update_no_reboot_bit) { 240 p->update_no_reboot_bit = pdata->update_no_reboot_bit; 241 p->no_reboot_priv = pdata->no_reboot_priv; 242 return; 243 } 244 245 if (p->iTCO_version >= 6) 246 p->update_no_reboot_bit = update_no_reboot_bit_cnt; 247 else if (p->iTCO_version >= 2) 248 p->update_no_reboot_bit = update_no_reboot_bit_mem; 249 else if (p->iTCO_version == 1) 250 p->update_no_reboot_bit = update_no_reboot_bit_pci; 251 else 252 p->update_no_reboot_bit = update_no_reboot_bit_def; 253 254 p->no_reboot_priv = p; 255 } 256 257 static int iTCO_wdt_start(struct watchdog_device *wd_dev) 258 { 259 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 260 unsigned int val; 261 262 spin_lock(&p->io_lock); 263 264 iTCO_vendor_pre_start(p->smi_res, wd_dev->timeout); 265 266 /* disable chipset's NO_REBOOT bit */ 267 if (p->update_no_reboot_bit(p->no_reboot_priv, false)) { 268 spin_unlock(&p->io_lock); 269 pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n"); 270 return -EIO; 271 } 272 273 /* Force the timer to its reload value by writing to the TCO_RLD 274 register */ 275 if (p->iTCO_version >= 2) 276 outw(0x01, TCO_RLD(p)); 277 else if (p->iTCO_version == 1) 278 outb(0x01, TCO_RLD(p)); 279 280 /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ 281 val = inw(TCO1_CNT(p)); 282 val &= 0xf7ff; 283 outw(val, TCO1_CNT(p)); 284 val = inw(TCO1_CNT(p)); 285 spin_unlock(&p->io_lock); 286 287 if (val & 0x0800) 288 return -1; 289 return 0; 290 } 291 292 static int iTCO_wdt_stop(struct watchdog_device *wd_dev) 293 { 294 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 295 unsigned int val; 296 297 spin_lock(&p->io_lock); 298 299 iTCO_vendor_pre_stop(p->smi_res); 300 301 /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ 302 val = inw(TCO1_CNT(p)); 303 val |= 0x0800; 304 outw(val, TCO1_CNT(p)); 305 val = inw(TCO1_CNT(p)); 306 307 /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ 308 p->update_no_reboot_bit(p->no_reboot_priv, true); 309 310 spin_unlock(&p->io_lock); 311 312 if ((val & 0x0800) == 0) 313 return -1; 314 return 0; 315 } 316 317 static int iTCO_wdt_ping(struct watchdog_device *wd_dev) 318 { 319 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 320 321 spin_lock(&p->io_lock); 322 323 /* Reload the timer by writing to the TCO Timer Counter register */ 324 if (p->iTCO_version >= 2) { 325 outw(0x01, TCO_RLD(p)); 326 } else if (p->iTCO_version == 1) { 327 /* Reset the timeout status bit so that the timer 328 * needs to count down twice again before rebooting */ 329 outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */ 330 331 outb(0x01, TCO_RLD(p)); 332 } 333 334 spin_unlock(&p->io_lock); 335 return 0; 336 } 337 338 static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t) 339 { 340 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 341 unsigned int val16; 342 unsigned char val8; 343 unsigned int tmrval; 344 345 tmrval = seconds_to_ticks(p, t); 346 347 /* For TCO v1 the timer counts down twice before rebooting */ 348 if (p->iTCO_version == 1) 349 tmrval /= 2; 350 351 /* from the specs: */ 352 /* "Values of 0h-3h are ignored and should not be attempted" */ 353 if (tmrval < 0x04) 354 return -EINVAL; 355 if ((p->iTCO_version >= 2 && tmrval > 0x3ff) || 356 (p->iTCO_version == 1 && tmrval > 0x03f)) 357 return -EINVAL; 358 359 /* Write new heartbeat to watchdog */ 360 if (p->iTCO_version >= 2) { 361 spin_lock(&p->io_lock); 362 val16 = inw(TCOv2_TMR(p)); 363 val16 &= 0xfc00; 364 val16 |= tmrval; 365 outw(val16, TCOv2_TMR(p)); 366 val16 = inw(TCOv2_TMR(p)); 367 spin_unlock(&p->io_lock); 368 369 if ((val16 & 0x3ff) != tmrval) 370 return -EINVAL; 371 } else if (p->iTCO_version == 1) { 372 spin_lock(&p->io_lock); 373 val8 = inb(TCOv1_TMR(p)); 374 val8 &= 0xc0; 375 val8 |= (tmrval & 0xff); 376 outb(val8, TCOv1_TMR(p)); 377 val8 = inb(TCOv1_TMR(p)); 378 spin_unlock(&p->io_lock); 379 380 if ((val8 & 0x3f) != tmrval) 381 return -EINVAL; 382 } 383 384 wd_dev->timeout = t; 385 return 0; 386 } 387 388 static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev) 389 { 390 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 391 unsigned int val16; 392 unsigned char val8; 393 unsigned int time_left = 0; 394 395 /* read the TCO Timer */ 396 if (p->iTCO_version >= 2) { 397 spin_lock(&p->io_lock); 398 val16 = inw(TCO_RLD(p)); 399 val16 &= 0x3ff; 400 spin_unlock(&p->io_lock); 401 402 time_left = ticks_to_seconds(p, val16); 403 } else if (p->iTCO_version == 1) { 404 spin_lock(&p->io_lock); 405 val8 = inb(TCO_RLD(p)); 406 val8 &= 0x3f; 407 if (!(inw(TCO1_STS(p)) & 0x0008)) 408 val8 += (inb(TCOv1_TMR(p)) & 0x3f); 409 spin_unlock(&p->io_lock); 410 411 time_left = ticks_to_seconds(p, val8); 412 } 413 return time_left; 414 } 415 416 /* 417 * Kernel Interfaces 418 */ 419 420 static const struct watchdog_info ident = { 421 .options = WDIOF_SETTIMEOUT | 422 WDIOF_KEEPALIVEPING | 423 WDIOF_MAGICCLOSE, 424 .firmware_version = 0, 425 .identity = DRV_NAME, 426 }; 427 428 static const struct watchdog_ops iTCO_wdt_ops = { 429 .owner = THIS_MODULE, 430 .start = iTCO_wdt_start, 431 .stop = iTCO_wdt_stop, 432 .ping = iTCO_wdt_ping, 433 .set_timeout = iTCO_wdt_set_timeout, 434 .get_timeleft = iTCO_wdt_get_timeleft, 435 }; 436 437 /* 438 * Init & exit routines 439 */ 440 441 static int iTCO_wdt_probe(struct platform_device *pdev) 442 { 443 struct device *dev = &pdev->dev; 444 struct itco_wdt_platform_data *pdata = dev_get_platdata(dev); 445 struct iTCO_wdt_private *p; 446 unsigned long val32; 447 int ret; 448 449 if (!pdata) 450 return -ENODEV; 451 452 p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL); 453 if (!p) 454 return -ENOMEM; 455 456 spin_lock_init(&p->io_lock); 457 458 p->tco_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_TCO); 459 if (!p->tco_res) 460 return -ENODEV; 461 462 p->smi_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_SMI); 463 if (!p->smi_res) 464 return -ENODEV; 465 466 p->iTCO_version = pdata->version; 467 p->pci_dev = to_pci_dev(dev->parent); 468 469 iTCO_wdt_no_reboot_bit_setup(p, pdata); 470 471 /* 472 * Get the Memory-Mapped GCS or PMC register, we need it for the 473 * NO_REBOOT flag (TCO v2 and v3). 474 */ 475 if (p->iTCO_version >= 2 && p->iTCO_version < 6 && 476 !pdata->update_no_reboot_bit) { 477 p->gcs_pmc_res = platform_get_resource(pdev, 478 IORESOURCE_MEM, 479 ICH_RES_MEM_GCS_PMC); 480 p->gcs_pmc = devm_ioremap_resource(dev, p->gcs_pmc_res); 481 if (IS_ERR(p->gcs_pmc)) 482 return PTR_ERR(p->gcs_pmc); 483 } 484 485 /* Check chipset's NO_REBOOT bit */ 486 if (p->update_no_reboot_bit(p->no_reboot_priv, false) && 487 iTCO_vendor_check_noreboot_on()) { 488 pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n"); 489 return -ENODEV; /* Cannot reset NO_REBOOT bit */ 490 } 491 492 /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ 493 p->update_no_reboot_bit(p->no_reboot_priv, true); 494 495 /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ 496 if (!devm_request_region(dev, p->smi_res->start, 497 resource_size(p->smi_res), 498 pdev->name)) { 499 pr_err("I/O address 0x%04llx already in use, device disabled\n", 500 (u64)SMI_EN(p)); 501 return -EBUSY; 502 } 503 if (turn_SMI_watchdog_clear_off >= p->iTCO_version) { 504 /* 505 * Bit 13: TCO_EN -> 0 506 * Disables TCO logic generating an SMI# 507 */ 508 val32 = inl(SMI_EN(p)); 509 val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ 510 outl(val32, SMI_EN(p)); 511 } 512 513 if (!devm_request_region(dev, p->tco_res->start, 514 resource_size(p->tco_res), 515 pdev->name)) { 516 pr_err("I/O address 0x%04llx already in use, device disabled\n", 517 (u64)TCOBASE(p)); 518 return -EBUSY; 519 } 520 521 pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n", 522 pdata->name, pdata->version, (u64)TCOBASE(p)); 523 524 /* Clear out the (probably old) status */ 525 switch (p->iTCO_version) { 526 case 6: 527 case 5: 528 case 4: 529 outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */ 530 outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */ 531 break; 532 case 3: 533 outl(0x20008, TCO1_STS(p)); 534 break; 535 case 2: 536 case 1: 537 default: 538 outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */ 539 outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */ 540 outw(0x0004, TCO2_STS(p)); /* Clear BOOT_STS bit */ 541 break; 542 } 543 544 p->wddev.info = &ident, 545 p->wddev.ops = &iTCO_wdt_ops, 546 p->wddev.bootstatus = 0; 547 p->wddev.timeout = WATCHDOG_TIMEOUT; 548 watchdog_set_nowayout(&p->wddev, nowayout); 549 p->wddev.parent = dev; 550 551 watchdog_set_drvdata(&p->wddev, p); 552 platform_set_drvdata(pdev, p); 553 554 /* Make sure the watchdog is not running */ 555 iTCO_wdt_stop(&p->wddev); 556 557 /* Check that the heartbeat value is within it's range; 558 if not reset to the default */ 559 if (iTCO_wdt_set_timeout(&p->wddev, heartbeat)) { 560 iTCO_wdt_set_timeout(&p->wddev, WATCHDOG_TIMEOUT); 561 pr_info("timeout value out of range, using %d\n", 562 WATCHDOG_TIMEOUT); 563 } 564 565 watchdog_stop_on_reboot(&p->wddev); 566 watchdog_stop_on_unregister(&p->wddev); 567 ret = devm_watchdog_register_device(dev, &p->wddev); 568 if (ret != 0) { 569 pr_err("cannot register watchdog device (err=%d)\n", ret); 570 return ret; 571 } 572 573 pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", 574 heartbeat, nowayout); 575 576 return 0; 577 } 578 579 #ifdef CONFIG_PM_SLEEP 580 /* 581 * Suspend-to-idle requires this, because it stops the ticks and timekeeping, so 582 * the watchdog cannot be pinged while in that state. In ACPI sleep states the 583 * watchdog is stopped by the platform firmware. 584 */ 585 586 #ifdef CONFIG_ACPI 587 static inline bool need_suspend(void) 588 { 589 return acpi_target_system_state() == ACPI_STATE_S0; 590 } 591 #else 592 static inline bool need_suspend(void) { return true; } 593 #endif 594 595 static int iTCO_wdt_suspend_noirq(struct device *dev) 596 { 597 struct iTCO_wdt_private *p = dev_get_drvdata(dev); 598 int ret = 0; 599 600 p->suspended = false; 601 if (watchdog_active(&p->wddev) && need_suspend()) { 602 ret = iTCO_wdt_stop(&p->wddev); 603 if (!ret) 604 p->suspended = true; 605 } 606 return ret; 607 } 608 609 static int iTCO_wdt_resume_noirq(struct device *dev) 610 { 611 struct iTCO_wdt_private *p = dev_get_drvdata(dev); 612 613 if (p->suspended) 614 iTCO_wdt_start(&p->wddev); 615 616 return 0; 617 } 618 619 static const struct dev_pm_ops iTCO_wdt_pm = { 620 .suspend_noirq = iTCO_wdt_suspend_noirq, 621 .resume_noirq = iTCO_wdt_resume_noirq, 622 }; 623 624 #define ITCO_WDT_PM_OPS (&iTCO_wdt_pm) 625 #else 626 #define ITCO_WDT_PM_OPS NULL 627 #endif /* CONFIG_PM_SLEEP */ 628 629 static struct platform_driver iTCO_wdt_driver = { 630 .probe = iTCO_wdt_probe, 631 .driver = { 632 .name = DRV_NAME, 633 .pm = ITCO_WDT_PM_OPS, 634 }, 635 }; 636 637 static int __init iTCO_wdt_init_module(void) 638 { 639 pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION); 640 641 return platform_driver_register(&iTCO_wdt_driver); 642 } 643 644 static void __exit iTCO_wdt_cleanup_module(void) 645 { 646 platform_driver_unregister(&iTCO_wdt_driver); 647 pr_info("Watchdog Module Unloaded\n"); 648 } 649 650 module_init(iTCO_wdt_init_module); 651 module_exit(iTCO_wdt_cleanup_module); 652 653 MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); 654 MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver"); 655 MODULE_VERSION(DRV_VERSION); 656 MODULE_LICENSE("GPL"); 657 MODULE_ALIAS("platform:" DRV_NAME); 658