1 /* 2 * intel TCO Watchdog Driver 3 * 4 * (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>. 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * as published by the Free Software Foundation; either version 9 * 2 of the License, or (at your option) any later version. 10 * 11 * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor 12 * provide warranty for any of this software. This material is 13 * provided "AS-IS" and at no charge. 14 * 15 * The TCO watchdog is implemented in the following I/O controller hubs: 16 * (See the intel documentation on http://developer.intel.com.) 17 * document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO) 18 * document number 290687-002, 298242-027: 82801BA (ICH2) 19 * document number 290733-003, 290739-013: 82801CA (ICH3-S) 20 * document number 290716-001, 290718-007: 82801CAM (ICH3-M) 21 * document number 290744-001, 290745-025: 82801DB (ICH4) 22 * document number 252337-001, 252663-008: 82801DBM (ICH4-M) 23 * document number 273599-001, 273645-002: 82801E (C-ICH) 24 * document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R) 25 * document number 300641-004, 300884-013: 6300ESB 26 * document number 301473-002, 301474-026: 82801F (ICH6) 27 * document number 313082-001, 313075-006: 631xESB, 632xESB 28 * document number 307013-003, 307014-024: 82801G (ICH7) 29 * document number 322896-001, 322897-001: NM10 30 * document number 313056-003, 313057-017: 82801H (ICH8) 31 * document number 316972-004, 316973-012: 82801I (ICH9) 32 * document number 319973-002, 319974-002: 82801J (ICH10) 33 * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH) 34 * document number 320066-003, 320257-008: EP80597 (IICH) 35 * document number 324645-001, 324646-001: Cougar Point (CPT) 36 * document number TBD : Patsburg (PBG) 37 * document number TBD : DH89xxCC 38 * document number TBD : Panther Point 39 * document number TBD : Lynx Point 40 * document number TBD : Lynx Point-LP 41 */ 42 43 /* 44 * Includes, defines, variables, module parameters, ... 45 */ 46 47 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 48 49 /* Module and version information */ 50 #define DRV_NAME "iTCO_wdt" 51 #define DRV_VERSION "1.11" 52 53 /* Includes */ 54 #include <linux/acpi.h> /* For ACPI support */ 55 #include <linux/module.h> /* For module specific items */ 56 #include <linux/moduleparam.h> /* For new moduleparam's */ 57 #include <linux/types.h> /* For standard types (like size_t) */ 58 #include <linux/errno.h> /* For the -ENODEV/... values */ 59 #include <linux/kernel.h> /* For printk/panic/... */ 60 #include <linux/watchdog.h> /* For the watchdog specific items */ 61 #include <linux/init.h> /* For __init/__exit/... */ 62 #include <linux/fs.h> /* For file operations */ 63 #include <linux/platform_device.h> /* For platform_driver framework */ 64 #include <linux/pci.h> /* For pci functions */ 65 #include <linux/ioport.h> /* For io-port access */ 66 #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ 67 #include <linux/uaccess.h> /* For copy_to_user/put_user/... */ 68 #include <linux/io.h> /* For inb/outb/... */ 69 #include <linux/platform_data/itco_wdt.h> 70 71 #include "iTCO_vendor.h" 72 73 /* Address definitions for the TCO */ 74 /* TCO base address */ 75 #define TCOBASE(p) ((p)->tco_res->start) 76 /* SMI Control and Enable Register */ 77 #define SMI_EN(p) ((p)->smi_res->start) 78 79 #define TCO_RLD(p) (TCOBASE(p) + 0x00) /* TCO Timer Reload/Curr. Value */ 80 #define TCOv1_TMR(p) (TCOBASE(p) + 0x01) /* TCOv1 Timer Initial Value*/ 81 #define TCO_DAT_IN(p) (TCOBASE(p) + 0x02) /* TCO Data In Register */ 82 #define TCO_DAT_OUT(p) (TCOBASE(p) + 0x03) /* TCO Data Out Register */ 83 #define TCO1_STS(p) (TCOBASE(p) + 0x04) /* TCO1 Status Register */ 84 #define TCO2_STS(p) (TCOBASE(p) + 0x06) /* TCO2 Status Register */ 85 #define TCO1_CNT(p) (TCOBASE(p) + 0x08) /* TCO1 Control Register */ 86 #define TCO2_CNT(p) (TCOBASE(p) + 0x0a) /* TCO2 Control Register */ 87 #define TCOv2_TMR(p) (TCOBASE(p) + 0x12) /* TCOv2 Timer Initial Value*/ 88 89 /* internal variables */ 90 struct iTCO_wdt_private { 91 struct watchdog_device wddev; 92 93 /* TCO version/generation */ 94 unsigned int iTCO_version; 95 struct resource *tco_res; 96 struct resource *smi_res; 97 /* 98 * NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2), 99 * or memory-mapped PMC register bit 4 (TCO version 3). 100 */ 101 struct resource *gcs_pmc_res; 102 unsigned long __iomem *gcs_pmc; 103 /* the lock for io operations */ 104 spinlock_t io_lock; 105 /* the PCI-device */ 106 struct pci_dev *pci_dev; 107 /* whether or not the watchdog has been suspended */ 108 bool suspended; 109 /* no reboot API private data */ 110 void *no_reboot_priv; 111 /* no reboot update function pointer */ 112 int (*update_no_reboot_bit)(void *p, bool set); 113 }; 114 115 /* module parameters */ 116 #define WATCHDOG_TIMEOUT 30 /* 30 sec default heartbeat */ 117 static int heartbeat = WATCHDOG_TIMEOUT; /* in seconds */ 118 module_param(heartbeat, int, 0); 119 MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. " 120 "5..76 (TCO v1) or 3..614 (TCO v2), default=" 121 __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); 122 123 static bool nowayout = WATCHDOG_NOWAYOUT; 124 module_param(nowayout, bool, 0); 125 MODULE_PARM_DESC(nowayout, 126 "Watchdog cannot be stopped once started (default=" 127 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); 128 129 static int turn_SMI_watchdog_clear_off = 1; 130 module_param(turn_SMI_watchdog_clear_off, int, 0); 131 MODULE_PARM_DESC(turn_SMI_watchdog_clear_off, 132 "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)"); 133 134 /* 135 * Some TCO specific functions 136 */ 137 138 /* 139 * The iTCO v1 and v2's internal timer is stored as ticks which decrement 140 * every 0.6 seconds. v3's internal timer is stored as seconds (some 141 * datasheets incorrectly state 0.6 seconds). 142 */ 143 static inline unsigned int seconds_to_ticks(struct iTCO_wdt_private *p, 144 int secs) 145 { 146 return p->iTCO_version == 3 ? secs : (secs * 10) / 6; 147 } 148 149 static inline unsigned int ticks_to_seconds(struct iTCO_wdt_private *p, 150 int ticks) 151 { 152 return p->iTCO_version == 3 ? ticks : (ticks * 6) / 10; 153 } 154 155 static inline u32 no_reboot_bit(struct iTCO_wdt_private *p) 156 { 157 u32 enable_bit; 158 159 switch (p->iTCO_version) { 160 case 5: 161 case 3: 162 enable_bit = 0x00000010; 163 break; 164 case 2: 165 enable_bit = 0x00000020; 166 break; 167 case 4: 168 case 1: 169 default: 170 enable_bit = 0x00000002; 171 break; 172 } 173 174 return enable_bit; 175 } 176 177 static int update_no_reboot_bit_def(void *priv, bool set) 178 { 179 return 0; 180 } 181 182 static int update_no_reboot_bit_pci(void *priv, bool set) 183 { 184 struct iTCO_wdt_private *p = priv; 185 u32 val32 = 0, newval32 = 0; 186 187 pci_read_config_dword(p->pci_dev, 0xd4, &val32); 188 if (set) 189 val32 |= no_reboot_bit(p); 190 else 191 val32 &= ~no_reboot_bit(p); 192 pci_write_config_dword(p->pci_dev, 0xd4, val32); 193 pci_read_config_dword(p->pci_dev, 0xd4, &newval32); 194 195 /* make sure the update is successful */ 196 if (val32 != newval32) 197 return -EIO; 198 199 return 0; 200 } 201 202 static int update_no_reboot_bit_mem(void *priv, bool set) 203 { 204 struct iTCO_wdt_private *p = priv; 205 u32 val32 = 0, newval32 = 0; 206 207 val32 = readl(p->gcs_pmc); 208 if (set) 209 val32 |= no_reboot_bit(p); 210 else 211 val32 &= ~no_reboot_bit(p); 212 writel(val32, p->gcs_pmc); 213 newval32 = readl(p->gcs_pmc); 214 215 /* make sure the update is successful */ 216 if (val32 != newval32) 217 return -EIO; 218 219 return 0; 220 } 221 222 static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p, 223 struct itco_wdt_platform_data *pdata) 224 { 225 if (pdata->update_no_reboot_bit) { 226 p->update_no_reboot_bit = pdata->update_no_reboot_bit; 227 p->no_reboot_priv = pdata->no_reboot_priv; 228 return; 229 } 230 231 if (p->iTCO_version >= 2) 232 p->update_no_reboot_bit = update_no_reboot_bit_mem; 233 else if (p->iTCO_version == 1) 234 p->update_no_reboot_bit = update_no_reboot_bit_pci; 235 else 236 p->update_no_reboot_bit = update_no_reboot_bit_def; 237 238 p->no_reboot_priv = p; 239 } 240 241 static int iTCO_wdt_start(struct watchdog_device *wd_dev) 242 { 243 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 244 unsigned int val; 245 246 spin_lock(&p->io_lock); 247 248 iTCO_vendor_pre_start(p->smi_res, wd_dev->timeout); 249 250 /* disable chipset's NO_REBOOT bit */ 251 if (p->update_no_reboot_bit(p->no_reboot_priv, false)) { 252 spin_unlock(&p->io_lock); 253 pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n"); 254 return -EIO; 255 } 256 257 /* Force the timer to its reload value by writing to the TCO_RLD 258 register */ 259 if (p->iTCO_version >= 2) 260 outw(0x01, TCO_RLD(p)); 261 else if (p->iTCO_version == 1) 262 outb(0x01, TCO_RLD(p)); 263 264 /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ 265 val = inw(TCO1_CNT(p)); 266 val &= 0xf7ff; 267 outw(val, TCO1_CNT(p)); 268 val = inw(TCO1_CNT(p)); 269 spin_unlock(&p->io_lock); 270 271 if (val & 0x0800) 272 return -1; 273 return 0; 274 } 275 276 static int iTCO_wdt_stop(struct watchdog_device *wd_dev) 277 { 278 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 279 unsigned int val; 280 281 spin_lock(&p->io_lock); 282 283 iTCO_vendor_pre_stop(p->smi_res); 284 285 /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ 286 val = inw(TCO1_CNT(p)); 287 val |= 0x0800; 288 outw(val, TCO1_CNT(p)); 289 val = inw(TCO1_CNT(p)); 290 291 /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ 292 p->update_no_reboot_bit(p->no_reboot_priv, true); 293 294 spin_unlock(&p->io_lock); 295 296 if ((val & 0x0800) == 0) 297 return -1; 298 return 0; 299 } 300 301 static int iTCO_wdt_ping(struct watchdog_device *wd_dev) 302 { 303 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 304 305 spin_lock(&p->io_lock); 306 307 /* Reload the timer by writing to the TCO Timer Counter register */ 308 if (p->iTCO_version >= 2) { 309 outw(0x01, TCO_RLD(p)); 310 } else if (p->iTCO_version == 1) { 311 /* Reset the timeout status bit so that the timer 312 * needs to count down twice again before rebooting */ 313 outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */ 314 315 outb(0x01, TCO_RLD(p)); 316 } 317 318 spin_unlock(&p->io_lock); 319 return 0; 320 } 321 322 static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t) 323 { 324 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 325 unsigned int val16; 326 unsigned char val8; 327 unsigned int tmrval; 328 329 tmrval = seconds_to_ticks(p, t); 330 331 /* For TCO v1 the timer counts down twice before rebooting */ 332 if (p->iTCO_version == 1) 333 tmrval /= 2; 334 335 /* from the specs: */ 336 /* "Values of 0h-3h are ignored and should not be attempted" */ 337 if (tmrval < 0x04) 338 return -EINVAL; 339 if ((p->iTCO_version >= 2 && tmrval > 0x3ff) || 340 (p->iTCO_version == 1 && tmrval > 0x03f)) 341 return -EINVAL; 342 343 /* Write new heartbeat to watchdog */ 344 if (p->iTCO_version >= 2) { 345 spin_lock(&p->io_lock); 346 val16 = inw(TCOv2_TMR(p)); 347 val16 &= 0xfc00; 348 val16 |= tmrval; 349 outw(val16, TCOv2_TMR(p)); 350 val16 = inw(TCOv2_TMR(p)); 351 spin_unlock(&p->io_lock); 352 353 if ((val16 & 0x3ff) != tmrval) 354 return -EINVAL; 355 } else if (p->iTCO_version == 1) { 356 spin_lock(&p->io_lock); 357 val8 = inb(TCOv1_TMR(p)); 358 val8 &= 0xc0; 359 val8 |= (tmrval & 0xff); 360 outb(val8, TCOv1_TMR(p)); 361 val8 = inb(TCOv1_TMR(p)); 362 spin_unlock(&p->io_lock); 363 364 if ((val8 & 0x3f) != tmrval) 365 return -EINVAL; 366 } 367 368 wd_dev->timeout = t; 369 return 0; 370 } 371 372 static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev) 373 { 374 struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); 375 unsigned int val16; 376 unsigned char val8; 377 unsigned int time_left = 0; 378 379 /* read the TCO Timer */ 380 if (p->iTCO_version >= 2) { 381 spin_lock(&p->io_lock); 382 val16 = inw(TCO_RLD(p)); 383 val16 &= 0x3ff; 384 spin_unlock(&p->io_lock); 385 386 time_left = ticks_to_seconds(p, val16); 387 } else if (p->iTCO_version == 1) { 388 spin_lock(&p->io_lock); 389 val8 = inb(TCO_RLD(p)); 390 val8 &= 0x3f; 391 if (!(inw(TCO1_STS(p)) & 0x0008)) 392 val8 += (inb(TCOv1_TMR(p)) & 0x3f); 393 spin_unlock(&p->io_lock); 394 395 time_left = ticks_to_seconds(p, val8); 396 } 397 return time_left; 398 } 399 400 /* 401 * Kernel Interfaces 402 */ 403 404 static const struct watchdog_info ident = { 405 .options = WDIOF_SETTIMEOUT | 406 WDIOF_KEEPALIVEPING | 407 WDIOF_MAGICCLOSE, 408 .firmware_version = 0, 409 .identity = DRV_NAME, 410 }; 411 412 static const struct watchdog_ops iTCO_wdt_ops = { 413 .owner = THIS_MODULE, 414 .start = iTCO_wdt_start, 415 .stop = iTCO_wdt_stop, 416 .ping = iTCO_wdt_ping, 417 .set_timeout = iTCO_wdt_set_timeout, 418 .get_timeleft = iTCO_wdt_get_timeleft, 419 }; 420 421 /* 422 * Init & exit routines 423 */ 424 425 static int iTCO_wdt_probe(struct platform_device *pdev) 426 { 427 struct device *dev = &pdev->dev; 428 struct itco_wdt_platform_data *pdata = dev_get_platdata(dev); 429 struct iTCO_wdt_private *p; 430 unsigned long val32; 431 int ret; 432 433 if (!pdata) 434 return -ENODEV; 435 436 p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL); 437 if (!p) 438 return -ENOMEM; 439 440 spin_lock_init(&p->io_lock); 441 442 p->tco_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_TCO); 443 if (!p->tco_res) 444 return -ENODEV; 445 446 p->smi_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_SMI); 447 if (!p->smi_res) 448 return -ENODEV; 449 450 p->iTCO_version = pdata->version; 451 p->pci_dev = to_pci_dev(dev->parent); 452 453 iTCO_wdt_no_reboot_bit_setup(p, pdata); 454 455 /* 456 * Get the Memory-Mapped GCS or PMC register, we need it for the 457 * NO_REBOOT flag (TCO v2 and v3). 458 */ 459 if (p->iTCO_version >= 2 && !pdata->update_no_reboot_bit) { 460 p->gcs_pmc_res = platform_get_resource(pdev, 461 IORESOURCE_MEM, 462 ICH_RES_MEM_GCS_PMC); 463 p->gcs_pmc = devm_ioremap_resource(dev, p->gcs_pmc_res); 464 if (IS_ERR(p->gcs_pmc)) 465 return PTR_ERR(p->gcs_pmc); 466 } 467 468 /* Check chipset's NO_REBOOT bit */ 469 if (p->update_no_reboot_bit(p->no_reboot_priv, false) && 470 iTCO_vendor_check_noreboot_on()) { 471 pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n"); 472 return -ENODEV; /* Cannot reset NO_REBOOT bit */ 473 } 474 475 /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ 476 p->update_no_reboot_bit(p->no_reboot_priv, true); 477 478 /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ 479 if (!devm_request_region(dev, p->smi_res->start, 480 resource_size(p->smi_res), 481 pdev->name)) { 482 pr_err("I/O address 0x%04llx already in use, device disabled\n", 483 (u64)SMI_EN(p)); 484 return -EBUSY; 485 } 486 if (turn_SMI_watchdog_clear_off >= p->iTCO_version) { 487 /* 488 * Bit 13: TCO_EN -> 0 489 * Disables TCO logic generating an SMI# 490 */ 491 val32 = inl(SMI_EN(p)); 492 val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ 493 outl(val32, SMI_EN(p)); 494 } 495 496 if (!devm_request_region(dev, p->tco_res->start, 497 resource_size(p->tco_res), 498 pdev->name)) { 499 pr_err("I/O address 0x%04llx already in use, device disabled\n", 500 (u64)TCOBASE(p)); 501 return -EBUSY; 502 } 503 504 pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n", 505 pdata->name, pdata->version, (u64)TCOBASE(p)); 506 507 /* Clear out the (probably old) status */ 508 switch (p->iTCO_version) { 509 case 5: 510 case 4: 511 outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */ 512 outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */ 513 break; 514 case 3: 515 outl(0x20008, TCO1_STS(p)); 516 break; 517 case 2: 518 case 1: 519 default: 520 outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */ 521 outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */ 522 outw(0x0004, TCO2_STS(p)); /* Clear BOOT_STS bit */ 523 break; 524 } 525 526 p->wddev.info = &ident, 527 p->wddev.ops = &iTCO_wdt_ops, 528 p->wddev.bootstatus = 0; 529 p->wddev.timeout = WATCHDOG_TIMEOUT; 530 watchdog_set_nowayout(&p->wddev, nowayout); 531 p->wddev.parent = dev; 532 533 watchdog_set_drvdata(&p->wddev, p); 534 platform_set_drvdata(pdev, p); 535 536 /* Make sure the watchdog is not running */ 537 iTCO_wdt_stop(&p->wddev); 538 539 /* Check that the heartbeat value is within it's range; 540 if not reset to the default */ 541 if (iTCO_wdt_set_timeout(&p->wddev, heartbeat)) { 542 iTCO_wdt_set_timeout(&p->wddev, WATCHDOG_TIMEOUT); 543 pr_info("timeout value out of range, using %d\n", 544 WATCHDOG_TIMEOUT); 545 } 546 547 watchdog_stop_on_reboot(&p->wddev); 548 watchdog_stop_on_unregister(&p->wddev); 549 ret = devm_watchdog_register_device(dev, &p->wddev); 550 if (ret != 0) { 551 pr_err("cannot register watchdog device (err=%d)\n", ret); 552 return ret; 553 } 554 555 pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", 556 heartbeat, nowayout); 557 558 return 0; 559 } 560 561 #ifdef CONFIG_PM_SLEEP 562 /* 563 * Suspend-to-idle requires this, because it stops the ticks and timekeeping, so 564 * the watchdog cannot be pinged while in that state. In ACPI sleep states the 565 * watchdog is stopped by the platform firmware. 566 */ 567 568 #ifdef CONFIG_ACPI 569 static inline bool need_suspend(void) 570 { 571 return acpi_target_system_state() == ACPI_STATE_S0; 572 } 573 #else 574 static inline bool need_suspend(void) { return true; } 575 #endif 576 577 static int iTCO_wdt_suspend_noirq(struct device *dev) 578 { 579 struct iTCO_wdt_private *p = dev_get_drvdata(dev); 580 int ret = 0; 581 582 p->suspended = false; 583 if (watchdog_active(&p->wddev) && need_suspend()) { 584 ret = iTCO_wdt_stop(&p->wddev); 585 if (!ret) 586 p->suspended = true; 587 } 588 return ret; 589 } 590 591 static int iTCO_wdt_resume_noirq(struct device *dev) 592 { 593 struct iTCO_wdt_private *p = dev_get_drvdata(dev); 594 595 if (p->suspended) 596 iTCO_wdt_start(&p->wddev); 597 598 return 0; 599 } 600 601 static const struct dev_pm_ops iTCO_wdt_pm = { 602 .suspend_noirq = iTCO_wdt_suspend_noirq, 603 .resume_noirq = iTCO_wdt_resume_noirq, 604 }; 605 606 #define ITCO_WDT_PM_OPS (&iTCO_wdt_pm) 607 #else 608 #define ITCO_WDT_PM_OPS NULL 609 #endif /* CONFIG_PM_SLEEP */ 610 611 static struct platform_driver iTCO_wdt_driver = { 612 .probe = iTCO_wdt_probe, 613 .driver = { 614 .name = DRV_NAME, 615 .pm = ITCO_WDT_PM_OPS, 616 }, 617 }; 618 619 static int __init iTCO_wdt_init_module(void) 620 { 621 pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION); 622 623 return platform_driver_register(&iTCO_wdt_driver); 624 } 625 626 static void __exit iTCO_wdt_cleanup_module(void) 627 { 628 platform_driver_unregister(&iTCO_wdt_driver); 629 pr_info("Watchdog Module Unloaded\n"); 630 } 631 632 module_init(iTCO_wdt_init_module); 633 module_exit(iTCO_wdt_cleanup_module); 634 635 MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); 636 MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver"); 637 MODULE_VERSION(DRV_VERSION); 638 MODULE_LICENSE("GPL"); 639 MODULE_ALIAS("platform:" DRV_NAME); 640