1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /***************************************************************************
3  *   Copyright (C) 2006 by Hans Edgington <hans@edgington.nl>              *
4  *   Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com>           *
5  *   Copyright (C) 2010 Giel van Schijndel <me@mortis.eu>                  *
6  *                                                                         *
7  ***************************************************************************/
8 
9 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
10 
11 #include <linux/err.h>
12 #include <linux/init.h>
13 #include <linux/io.h>
14 #include <linux/ioport.h>
15 #include <linux/module.h>
16 #include <linux/platform_device.h>
17 #include <linux/watchdog.h>
18 
19 #define DRVNAME "f71808e_wdt"
20 
21 #define SIO_F71808FG_LD_WDT	0x07	/* Watchdog timer logical device */
22 #define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
23 #define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
24 
25 #define SIO_REG_LDSEL		0x07	/* Logical device select */
26 #define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
27 #define SIO_REG_DEVREV		0x22	/* Device revision */
28 #define SIO_REG_MANID		0x23	/* Fintek ID (2 bytes) */
29 #define SIO_REG_CLOCK_SEL	0x26	/* Clock select */
30 #define SIO_REG_ROM_ADDR_SEL	0x27	/* ROM address select */
31 #define SIO_F81866_REG_PORT_SEL	0x27	/* F81866 Multi-Function Register */
32 #define SIO_REG_TSI_LEVEL_SEL	0x28	/* TSI Level select */
33 #define SIO_REG_MFUNCT1		0x29	/* Multi function select 1 */
34 #define SIO_REG_MFUNCT2		0x2a	/* Multi function select 2 */
35 #define SIO_REG_MFUNCT3		0x2b	/* Multi function select 3 */
36 #define SIO_F81866_REG_GPIO1	0x2c	/* F81866 GPIO1 Enable Register */
37 #define SIO_REG_ENABLE		0x30	/* Logical device enable */
38 #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
39 
40 #define SIO_FINTEK_ID		0x1934	/* Manufacturers ID */
41 #define SIO_F71808_ID		0x0901	/* Chipset ID */
42 #define SIO_F71858_ID		0x0507	/* Chipset ID */
43 #define SIO_F71862_ID		0x0601	/* Chipset ID */
44 #define SIO_F71868_ID		0x1106	/* Chipset ID */
45 #define SIO_F71869_ID		0x0814	/* Chipset ID */
46 #define SIO_F71869A_ID		0x1007	/* Chipset ID */
47 #define SIO_F71882_ID		0x0541	/* Chipset ID */
48 #define SIO_F71889_ID		0x0723	/* Chipset ID */
49 #define SIO_F81803_ID		0x1210	/* Chipset ID */
50 #define SIO_F81865_ID		0x0704	/* Chipset ID */
51 #define SIO_F81866_ID		0x1010	/* Chipset ID */
52 #define SIO_F81966_ID		0x1502  /* F81804 chipset ID, same for f81966 */
53 
54 #define F71808FG_REG_WDO_CONF		0xf0
55 #define F71808FG_REG_WDT_CONF		0xf5
56 #define F71808FG_REG_WD_TIME		0xf6
57 
58 #define F71808FG_FLAG_WDOUT_EN		7
59 
60 #define F71808FG_FLAG_WDTMOUT_STS	6
61 #define F71808FG_FLAG_WD_EN		5
62 #define F71808FG_FLAG_WD_PULSE		4
63 #define F71808FG_FLAG_WD_UNIT		3
64 
65 #define F81865_REG_WDO_CONF		0xfa
66 #define F81865_FLAG_WDOUT_EN		0
67 
68 /* Default values */
69 #define WATCHDOG_TIMEOUT	60	/* 1 minute default timeout */
70 #define WATCHDOG_MAX_TIMEOUT	(60 * 255)
71 #define WATCHDOG_PULSE_WIDTH	125	/* 125 ms, default pulse width for
72 					   watchdog signal */
73 #define WATCHDOG_F71862FG_PIN	63	/* default watchdog reset output
74 					   pin number 63 */
75 
76 static unsigned short force_id;
77 module_param(force_id, ushort, 0);
78 MODULE_PARM_DESC(force_id, "Override the detected device ID");
79 
80 static int timeout = WATCHDOG_TIMEOUT;	/* default timeout in seconds */
81 module_param(timeout, int, 0);
82 MODULE_PARM_DESC(timeout,
83 	"Watchdog timeout in seconds. 1<= timeout <="
84 			__MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default="
85 			__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
86 
87 static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH;
88 module_param(pulse_width, uint, 0);
89 MODULE_PARM_DESC(pulse_width,
90 	"Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms"
91 			" (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
92 
93 static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN;
94 module_param(f71862fg_pin, uint, 0);
95 MODULE_PARM_DESC(f71862fg_pin,
96 	"Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63"
97 			" (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")");
98 
99 static bool nowayout = WATCHDOG_NOWAYOUT;
100 module_param(nowayout, bool, 0444);
101 MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
102 
103 static unsigned int start_withtimeout;
104 module_param(start_withtimeout, uint, 0);
105 MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
106 	" given initial timeout. Zero (default) disables this feature.");
107 
108 enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg,
109 	     f81803, f81865, f81866, f81966};
110 
111 static const char * const fintek_wdt_names[] = {
112 	"f71808fg",
113 	"f71858fg",
114 	"f71862fg",
115 	"f71868",
116 	"f71869",
117 	"f71882fg",
118 	"f71889fg",
119 	"f81803",
120 	"f81865",
121 	"f81866",
122 	"f81966"
123 };
124 
125 /* Super-I/O Function prototypes */
126 static inline int superio_inb(int base, int reg);
127 static inline int superio_inw(int base, int reg);
128 static inline void superio_outb(int base, int reg, u8 val);
129 static inline void superio_set_bit(int base, int reg, int bit);
130 static inline void superio_clear_bit(int base, int reg, int bit);
131 static inline int superio_enter(int base);
132 static inline void superio_select(int base, int ld);
133 static inline void superio_exit(int base);
134 
135 struct fintek_wdt {
136 	struct watchdog_device wdd;
137 	unsigned short	sioaddr;
138 	enum chips	type;
139 	struct watchdog_info ident;
140 
141 	u8		timer_val;	/* content for the wd_time register */
142 	char		minutes_mode;
143 	u8		pulse_val;	/* pulse width flag */
144 	char		pulse_mode;	/* enable pulse output mode? */
145 };
146 
147 struct fintek_wdt_pdata {
148 	enum chips	type;
149 };
150 
151 /* Super I/O functions */
152 static inline int superio_inb(int base, int reg)
153 {
154 	outb(reg, base);
155 	return inb(base + 1);
156 }
157 
158 static int superio_inw(int base, int reg)
159 {
160 	int val;
161 	val  = superio_inb(base, reg) << 8;
162 	val |= superio_inb(base, reg + 1);
163 	return val;
164 }
165 
166 static inline void superio_outb(int base, int reg, u8 val)
167 {
168 	outb(reg, base);
169 	outb(val, base + 1);
170 }
171 
172 static inline void superio_set_bit(int base, int reg, int bit)
173 {
174 	unsigned long val = superio_inb(base, reg);
175 	__set_bit(bit, &val);
176 	superio_outb(base, reg, val);
177 }
178 
179 static inline void superio_clear_bit(int base, int reg, int bit)
180 {
181 	unsigned long val = superio_inb(base, reg);
182 	__clear_bit(bit, &val);
183 	superio_outb(base, reg, val);
184 }
185 
186 static inline int superio_enter(int base)
187 {
188 	/* Don't step on other drivers' I/O space by accident */
189 	if (!request_muxed_region(base, 2, DRVNAME)) {
190 		pr_err("I/O address 0x%04x already in use\n", (int)base);
191 		return -EBUSY;
192 	}
193 
194 	/* according to the datasheet the key must be sent twice! */
195 	outb(SIO_UNLOCK_KEY, base);
196 	outb(SIO_UNLOCK_KEY, base);
197 
198 	return 0;
199 }
200 
201 static inline void superio_select(int base, int ld)
202 {
203 	outb(SIO_REG_LDSEL, base);
204 	outb(ld, base + 1);
205 }
206 
207 static inline void superio_exit(int base)
208 {
209 	outb(SIO_LOCK_KEY, base);
210 	release_region(base, 2);
211 }
212 
213 static int fintek_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout)
214 {
215 	struct fintek_wdt *wd = watchdog_get_drvdata(wdd);
216 
217 	if (timeout > 0xff) {
218 		wd->timer_val = DIV_ROUND_UP(timeout, 60);
219 		wd->minutes_mode = true;
220 		timeout = wd->timer_val * 60;
221 	} else {
222 		wd->timer_val = timeout;
223 		wd->minutes_mode = false;
224 	}
225 
226 	wdd->timeout = timeout;
227 
228 	return 0;
229 }
230 
231 static int fintek_wdt_set_pulse_width(struct fintek_wdt *wd, unsigned int pw)
232 {
233 	unsigned int t1 = 25, t2 = 125, t3 = 5000;
234 
235 	if (wd->type == f71868) {
236 		t1 = 30;
237 		t2 = 150;
238 		t3 = 6000;
239 	}
240 
241 	if        (pw <=  1) {
242 		wd->pulse_val = 0;
243 	} else if (pw <= t1) {
244 		wd->pulse_val = 1;
245 	} else if (pw <= t2) {
246 		wd->pulse_val = 2;
247 	} else if (pw <= t3) {
248 		wd->pulse_val = 3;
249 	} else {
250 		pr_err("pulse width out of range\n");
251 		return -EINVAL;
252 	}
253 
254 	wd->pulse_mode = pw;
255 
256 	return 0;
257 }
258 
259 static int fintek_wdt_keepalive(struct watchdog_device *wdd)
260 {
261 	struct fintek_wdt *wd = watchdog_get_drvdata(wdd);
262 	int err;
263 
264 	err = superio_enter(wd->sioaddr);
265 	if (err)
266 		return err;
267 	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
268 
269 	if (wd->minutes_mode)
270 		/* select minutes for timer units */
271 		superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
272 				F71808FG_FLAG_WD_UNIT);
273 	else
274 		/* select seconds for timer units */
275 		superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
276 				F71808FG_FLAG_WD_UNIT);
277 
278 	/* Set timer value */
279 	superio_outb(wd->sioaddr, F71808FG_REG_WD_TIME,
280 			   wd->timer_val);
281 
282 	superio_exit(wd->sioaddr);
283 
284 	return 0;
285 }
286 
287 static int fintek_wdt_start(struct watchdog_device *wdd)
288 {
289 	struct fintek_wdt *wd = watchdog_get_drvdata(wdd);
290 	int err;
291 	u8 tmp;
292 
293 	/* Make sure we don't die as soon as the watchdog is enabled below */
294 	err = fintek_wdt_keepalive(wdd);
295 	if (err)
296 		return err;
297 
298 	err = superio_enter(wd->sioaddr);
299 	if (err)
300 		return err;
301 	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
302 
303 	/* Watchdog pin configuration */
304 	switch (wd->type) {
305 	case f71808fg:
306 		/* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
307 		superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT2, 3);
308 		superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 3);
309 		break;
310 
311 	case f71862fg:
312 		if (f71862fg_pin == 63) {
313 			/* SPI must be disabled first to use this pin! */
314 			superio_clear_bit(wd->sioaddr, SIO_REG_ROM_ADDR_SEL, 6);
315 			superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT3, 4);
316 		} else if (f71862fg_pin == 56) {
317 			superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1);
318 		}
319 		break;
320 
321 	case f71868:
322 	case f71869:
323 		/* GPIO14 --> WDTRST# */
324 		superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT1, 4);
325 		break;
326 
327 	case f71882fg:
328 		/* Set pin 56 to WDTRST# */
329 		superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1);
330 		break;
331 
332 	case f71889fg:
333 		/* set pin 40 to WDTRST# */
334 		superio_outb(wd->sioaddr, SIO_REG_MFUNCT3,
335 			superio_inb(wd->sioaddr, SIO_REG_MFUNCT3) & 0xcf);
336 		break;
337 
338 	case f81803:
339 		/* Enable TSI Level register bank */
340 		superio_clear_bit(wd->sioaddr, SIO_REG_CLOCK_SEL, 3);
341 		/* Set pin 27 to WDTRST# */
342 		superio_outb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL, 0x5f &
343 			superio_inb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL));
344 		break;
345 
346 	case f81865:
347 		/* Set pin 70 to WDTRST# */
348 		superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 5);
349 		break;
350 
351 	case f81866:
352 	case f81966:
353 		/*
354 		 * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0.
355 		 * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch:
356 		 *     BIT5: 0 -> WDTRST#
357 		 *           1 -> GPIO15
358 		 */
359 		tmp = superio_inb(wd->sioaddr, SIO_F81866_REG_PORT_SEL);
360 		tmp &= ~(BIT(3) | BIT(0));
361 		tmp |= BIT(2);
362 		superio_outb(wd->sioaddr, SIO_F81866_REG_PORT_SEL, tmp);
363 
364 		superio_clear_bit(wd->sioaddr, SIO_F81866_REG_GPIO1, 5);
365 		break;
366 
367 	default:
368 		/*
369 		 * 'default' label to shut up the compiler and catch
370 		 * programmer errors
371 		 */
372 		err = -ENODEV;
373 		goto exit_superio;
374 	}
375 
376 	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
377 	superio_set_bit(wd->sioaddr, SIO_REG_ENABLE, 0);
378 
379 	if (wd->type == f81865 || wd->type == f81866 || wd->type == f81966)
380 		superio_set_bit(wd->sioaddr, F81865_REG_WDO_CONF,
381 				F81865_FLAG_WDOUT_EN);
382 	else
383 		superio_set_bit(wd->sioaddr, F71808FG_REG_WDO_CONF,
384 				F71808FG_FLAG_WDOUT_EN);
385 
386 	superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
387 			F71808FG_FLAG_WD_EN);
388 
389 	if (wd->pulse_mode) {
390 		/* Select "pulse" output mode with given duration */
391 		u8 wdt_conf = superio_inb(wd->sioaddr,
392 				F71808FG_REG_WDT_CONF);
393 
394 		/* Set WD_PSWIDTH bits (1:0) */
395 		wdt_conf = (wdt_conf & 0xfc) | (wd->pulse_val & 0x03);
396 		/* Set WD_PULSE to "pulse" mode */
397 		wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE);
398 
399 		superio_outb(wd->sioaddr, F71808FG_REG_WDT_CONF,
400 				wdt_conf);
401 	} else {
402 		/* Select "level" output mode */
403 		superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
404 				F71808FG_FLAG_WD_PULSE);
405 	}
406 
407 exit_superio:
408 	superio_exit(wd->sioaddr);
409 
410 	return err;
411 }
412 
413 static int fintek_wdt_stop(struct watchdog_device *wdd)
414 {
415 	struct fintek_wdt *wd = watchdog_get_drvdata(wdd);
416 	int err;
417 
418 	err = superio_enter(wd->sioaddr);
419 	if (err)
420 		return err;
421 	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
422 
423 	superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
424 			F71808FG_FLAG_WD_EN);
425 
426 	superio_exit(wd->sioaddr);
427 
428 	return 0;
429 }
430 
431 static bool fintek_wdt_is_running(struct fintek_wdt *wd, u8 wdt_conf)
432 {
433 	return (superio_inb(wd->sioaddr, SIO_REG_ENABLE) & BIT(0))
434 		&& (wdt_conf & BIT(F71808FG_FLAG_WD_EN));
435 }
436 
437 static const struct watchdog_ops fintek_wdt_ops = {
438 	.owner = THIS_MODULE,
439 	.start = fintek_wdt_start,
440 	.stop = fintek_wdt_stop,
441 	.ping = fintek_wdt_keepalive,
442 	.set_timeout = fintek_wdt_set_timeout,
443 };
444 
445 static int fintek_wdt_probe(struct platform_device *pdev)
446 {
447 	struct device *dev = &pdev->dev;
448 	struct fintek_wdt_pdata *pdata;
449 	struct watchdog_device *wdd;
450 	struct fintek_wdt *wd;
451 	int wdt_conf, err = 0;
452 	struct resource *res;
453 	int sioaddr;
454 
455 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
456 	if (!res)
457 		return -ENXIO;
458 
459 	sioaddr = res->start;
460 
461 	wd = devm_kzalloc(dev, sizeof(*wd), GFP_KERNEL);
462 	if (!wd)
463 		return -ENOMEM;
464 
465 	pdata = dev->platform_data;
466 
467 	wd->type = pdata->type;
468 	wd->sioaddr = sioaddr;
469 	wd->ident.options = WDIOF_SETTIMEOUT
470 			| WDIOF_MAGICCLOSE
471 			| WDIOF_KEEPALIVEPING
472 			| WDIOF_CARDRESET;
473 
474 	snprintf(wd->ident.identity,
475 		sizeof(wd->ident.identity), "%s watchdog",
476 		fintek_wdt_names[wd->type]);
477 
478 	err = superio_enter(sioaddr);
479 	if (err)
480 		return err;
481 	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
482 
483 	wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
484 
485 	/*
486 	 * We don't want WDTMOUT_STS to stick around till regular reboot.
487 	 * Write 1 to the bit to clear it to zero.
488 	 */
489 	superio_outb(sioaddr, F71808FG_REG_WDT_CONF,
490 		     wdt_conf | BIT(F71808FG_FLAG_WDTMOUT_STS));
491 
492 	wdd = &wd->wdd;
493 
494 	if (fintek_wdt_is_running(wd, wdt_conf))
495 		set_bit(WDOG_HW_RUNNING, &wdd->status);
496 
497 	superio_exit(sioaddr);
498 
499 	wdd->parent		= dev;
500 	wdd->info               = &wd->ident;
501 	wdd->ops                = &fintek_wdt_ops;
502 	wdd->min_timeout        = 1;
503 	wdd->max_timeout        = WATCHDOG_MAX_TIMEOUT;
504 
505 	watchdog_set_drvdata(wdd, wd);
506 	watchdog_set_nowayout(wdd, nowayout);
507 	watchdog_stop_on_unregister(wdd);
508 	watchdog_stop_on_reboot(wdd);
509 	watchdog_init_timeout(wdd, start_withtimeout ?: timeout, NULL);
510 
511 	if (wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS))
512 		wdd->bootstatus = WDIOF_CARDRESET;
513 
514 	/*
515 	 * WATCHDOG_HANDLE_BOOT_ENABLED can result in keepalive being directly
516 	 * called without a set_timeout before, so it needs to be done here
517 	 * unconditionally.
518 	 */
519 	fintek_wdt_set_timeout(wdd, wdd->timeout);
520 	fintek_wdt_set_pulse_width(wd, pulse_width);
521 
522 	if (start_withtimeout) {
523 		err = fintek_wdt_start(wdd);
524 		if (err) {
525 			dev_err(dev, "cannot start watchdog timer\n");
526 			return err;
527 		}
528 
529 		set_bit(WDOG_HW_RUNNING, &wdd->status);
530 		dev_info(dev, "watchdog started with initial timeout of %u sec\n",
531 			 start_withtimeout);
532 	}
533 
534 	return devm_watchdog_register_device(dev, wdd);
535 }
536 
537 static int __init fintek_wdt_find(int sioaddr)
538 {
539 	enum chips type;
540 	u16 devid;
541 	int err = superio_enter(sioaddr);
542 	if (err)
543 		return err;
544 
545 	devid = superio_inw(sioaddr, SIO_REG_MANID);
546 	if (devid != SIO_FINTEK_ID) {
547 		pr_debug("Not a Fintek device\n");
548 		err = -ENODEV;
549 		goto exit;
550 	}
551 
552 	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
553 	switch (devid) {
554 	case SIO_F71808_ID:
555 		type = f71808fg;
556 		break;
557 	case SIO_F71862_ID:
558 		type = f71862fg;
559 		break;
560 	case SIO_F71868_ID:
561 		type = f71868;
562 		break;
563 	case SIO_F71869_ID:
564 	case SIO_F71869A_ID:
565 		type = f71869;
566 		break;
567 	case SIO_F71882_ID:
568 		type = f71882fg;
569 		break;
570 	case SIO_F71889_ID:
571 		type = f71889fg;
572 		break;
573 	case SIO_F71858_ID:
574 		/* Confirmed (by datasheet) not to have a watchdog. */
575 		err = -ENODEV;
576 		goto exit;
577 	case SIO_F81803_ID:
578 		type = f81803;
579 		break;
580 	case SIO_F81865_ID:
581 		type = f81865;
582 		break;
583 	case SIO_F81866_ID:
584 		type = f81866;
585 		break;
586 	case SIO_F81966_ID:
587 		type = f81966;
588 		break;
589 	default:
590 		pr_info("Unrecognized Fintek device: %04x\n",
591 			(unsigned int)devid);
592 		err = -ENODEV;
593 		goto exit;
594 	}
595 
596 	pr_info("Found %s watchdog chip, revision %d\n",
597 		fintek_wdt_names[type],
598 		(int)superio_inb(sioaddr, SIO_REG_DEVREV));
599 
600 exit:
601 	superio_exit(sioaddr);
602 	return err ? err : type;
603 }
604 
605 static struct platform_driver fintek_wdt_driver = {
606 	.probe          = fintek_wdt_probe,
607 	.driver         = {
608 		.name   = DRVNAME,
609 	},
610 };
611 
612 static struct platform_device *fintek_wdt_pdev;
613 
614 static int __init fintek_wdt_init(void)
615 {
616 	static const unsigned short addrs[] = { 0x2e, 0x4e };
617 	struct fintek_wdt_pdata pdata;
618 	struct resource wdt_res = {};
619 	int ret;
620 	int i;
621 
622 	if (f71862fg_pin != 63 && f71862fg_pin != 56) {
623 		pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin);
624 		return -EINVAL;
625 	}
626 
627 	for (i = 0; i < ARRAY_SIZE(addrs); i++) {
628 		ret = fintek_wdt_find(addrs[i]);
629 		if (ret >= 0)
630 			break;
631 	}
632 	if (i == ARRAY_SIZE(addrs))
633 		return ret;
634 
635 	pdata.type = ret;
636 
637 	platform_driver_register(&fintek_wdt_driver);
638 
639 	wdt_res.name = "superio port";
640 	wdt_res.flags = IORESOURCE_IO;
641 	wdt_res.start = addrs[i];
642 	wdt_res.end   = addrs[i] + 1;
643 
644 	fintek_wdt_pdev = platform_device_register_resndata(NULL, DRVNAME, -1,
645 							    &wdt_res, 1,
646 							    &pdata, sizeof(pdata));
647 	if (IS_ERR(fintek_wdt_pdev)) {
648 		platform_driver_unregister(&fintek_wdt_driver);
649 		return PTR_ERR(fintek_wdt_pdev);
650 	}
651 
652 	return 0;
653 }
654 
655 static void __exit fintek_wdt_exit(void)
656 {
657 	platform_device_unregister(fintek_wdt_pdev);
658 	platform_driver_unregister(&fintek_wdt_driver);
659 }
660 
661 MODULE_DESCRIPTION("F71808E Watchdog Driver");
662 MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>");
663 MODULE_LICENSE("GPL");
664 
665 module_init(fintek_wdt_init);
666 module_exit(fintek_wdt_exit);
667