1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /*************************************************************************** 3 * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> * 4 * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> * 5 * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> * 6 * * 7 ***************************************************************************/ 8 9 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 10 11 #include <linux/err.h> 12 #include <linux/init.h> 13 #include <linux/io.h> 14 #include <linux/ioport.h> 15 #include <linux/module.h> 16 #include <linux/platform_device.h> 17 #include <linux/watchdog.h> 18 19 #define DRVNAME "f71808e_wdt" 20 21 #define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */ 22 #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ 23 #define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ 24 25 #define SIO_REG_LDSEL 0x07 /* Logical device select */ 26 #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ 27 #define SIO_REG_DEVREV 0x22 /* Device revision */ 28 #define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ 29 #define SIO_REG_CLOCK_SEL 0x26 /* Clock select */ 30 #define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */ 31 #define SIO_F81866_REG_PORT_SEL 0x27 /* F81866 Multi-Function Register */ 32 #define SIO_REG_TSI_LEVEL_SEL 0x28 /* TSI Level select */ 33 #define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */ 34 #define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */ 35 #define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */ 36 #define SIO_F81866_REG_GPIO1 0x2c /* F81866 GPIO1 Enable Register */ 37 #define SIO_REG_ENABLE 0x30 /* Logical device enable */ 38 #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ 39 40 #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ 41 #define SIO_F71808_ID 0x0901 /* Chipset ID */ 42 #define SIO_F71858_ID 0x0507 /* Chipset ID */ 43 #define SIO_F71862_ID 0x0601 /* Chipset ID */ 44 #define SIO_F71868_ID 0x1106 /* Chipset ID */ 45 #define SIO_F71869_ID 0x0814 /* Chipset ID */ 46 #define SIO_F71869A_ID 0x1007 /* Chipset ID */ 47 #define SIO_F71882_ID 0x0541 /* Chipset ID */ 48 #define SIO_F71889_ID 0x0723 /* Chipset ID */ 49 #define SIO_F81803_ID 0x1210 /* Chipset ID */ 50 #define SIO_F81865_ID 0x0704 /* Chipset ID */ 51 #define SIO_F81866_ID 0x1010 /* Chipset ID */ 52 #define SIO_F81966_ID 0x1502 /* F81804 chipset ID, same for f81966 */ 53 54 #define F71808FG_REG_WDO_CONF 0xf0 55 #define F71808FG_REG_WDT_CONF 0xf5 56 #define F71808FG_REG_WD_TIME 0xf6 57 58 #define F71808FG_FLAG_WDOUT_EN 7 59 60 #define F71808FG_FLAG_WDTMOUT_STS 6 61 #define F71808FG_FLAG_WD_EN 5 62 #define F71808FG_FLAG_WD_PULSE 4 63 #define F71808FG_FLAG_WD_UNIT 3 64 65 #define F81865_REG_WDO_CONF 0xfa 66 #define F81865_FLAG_WDOUT_EN 0 67 68 /* Default values */ 69 #define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */ 70 #define WATCHDOG_MAX_TIMEOUT (60 * 255) 71 #define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for 72 watchdog signal */ 73 #define WATCHDOG_F71862FG_PIN 63 /* default watchdog reset output 74 pin number 63 */ 75 76 static unsigned short force_id; 77 module_param(force_id, ushort, 0); 78 MODULE_PARM_DESC(force_id, "Override the detected device ID"); 79 80 static int timeout = WATCHDOG_TIMEOUT; /* default timeout in seconds */ 81 module_param(timeout, int, 0); 82 MODULE_PARM_DESC(timeout, 83 "Watchdog timeout in seconds. 1<= timeout <=" 84 __MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default=" 85 __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); 86 87 static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH; 88 module_param(pulse_width, uint, 0); 89 MODULE_PARM_DESC(pulse_width, 90 "Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms" 91 " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")"); 92 93 static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN; 94 module_param(f71862fg_pin, uint, 0); 95 MODULE_PARM_DESC(f71862fg_pin, 96 "Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63" 97 " (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")"); 98 99 static bool nowayout = WATCHDOG_NOWAYOUT; 100 module_param(nowayout, bool, 0444); 101 MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); 102 103 static unsigned int start_withtimeout; 104 module_param(start_withtimeout, uint, 0); 105 MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" 106 " given initial timeout. Zero (default) disables this feature."); 107 108 enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg, 109 f81803, f81865, f81866, f81966}; 110 111 static const char * const fintek_wdt_names[] = { 112 "f71808fg", 113 "f71858fg", 114 "f71862fg", 115 "f71868", 116 "f71869", 117 "f71882fg", 118 "f71889fg", 119 "f81803", 120 "f81865", 121 "f81866", 122 "f81966" 123 }; 124 125 /* Super-I/O Function prototypes */ 126 static inline int superio_inb(int base, int reg); 127 static inline int superio_inw(int base, int reg); 128 static inline void superio_outb(int base, int reg, u8 val); 129 static inline void superio_set_bit(int base, int reg, int bit); 130 static inline void superio_clear_bit(int base, int reg, int bit); 131 static inline int superio_enter(int base); 132 static inline void superio_select(int base, int ld); 133 static inline void superio_exit(int base); 134 135 struct fintek_wdt { 136 struct watchdog_device wdd; 137 unsigned short sioaddr; 138 enum chips type; 139 struct watchdog_info ident; 140 141 u8 timer_val; /* content for the wd_time register */ 142 char minutes_mode; 143 u8 pulse_val; /* pulse width flag */ 144 char pulse_mode; /* enable pulse output mode? */ 145 }; 146 147 struct fintek_wdt_pdata { 148 enum chips type; 149 }; 150 151 /* Super I/O functions */ 152 static inline int superio_inb(int base, int reg) 153 { 154 outb(reg, base); 155 return inb(base + 1); 156 } 157 158 static int superio_inw(int base, int reg) 159 { 160 int val; 161 val = superio_inb(base, reg) << 8; 162 val |= superio_inb(base, reg + 1); 163 return val; 164 } 165 166 static inline void superio_outb(int base, int reg, u8 val) 167 { 168 outb(reg, base); 169 outb(val, base + 1); 170 } 171 172 static inline void superio_set_bit(int base, int reg, int bit) 173 { 174 unsigned long val = superio_inb(base, reg); 175 __set_bit(bit, &val); 176 superio_outb(base, reg, val); 177 } 178 179 static inline void superio_clear_bit(int base, int reg, int bit) 180 { 181 unsigned long val = superio_inb(base, reg); 182 __clear_bit(bit, &val); 183 superio_outb(base, reg, val); 184 } 185 186 static inline int superio_enter(int base) 187 { 188 /* Don't step on other drivers' I/O space by accident */ 189 if (!request_muxed_region(base, 2, DRVNAME)) { 190 pr_err("I/O address 0x%04x already in use\n", (int)base); 191 return -EBUSY; 192 } 193 194 /* according to the datasheet the key must be sent twice! */ 195 outb(SIO_UNLOCK_KEY, base); 196 outb(SIO_UNLOCK_KEY, base); 197 198 return 0; 199 } 200 201 static inline void superio_select(int base, int ld) 202 { 203 outb(SIO_REG_LDSEL, base); 204 outb(ld, base + 1); 205 } 206 207 static inline void superio_exit(int base) 208 { 209 outb(SIO_LOCK_KEY, base); 210 release_region(base, 2); 211 } 212 213 static int fintek_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout) 214 { 215 struct fintek_wdt *wd = watchdog_get_drvdata(wdd); 216 217 if (timeout > 0xff) { 218 wd->timer_val = DIV_ROUND_UP(timeout, 60); 219 wd->minutes_mode = true; 220 timeout = wd->timer_val * 60; 221 } else { 222 wd->timer_val = timeout; 223 wd->minutes_mode = false; 224 } 225 226 wdd->timeout = timeout; 227 228 return 0; 229 } 230 231 static int fintek_wdt_set_pulse_width(struct fintek_wdt *wd, unsigned int pw) 232 { 233 unsigned int t1 = 25, t2 = 125, t3 = 5000; 234 235 if (wd->type == f71868) { 236 t1 = 30; 237 t2 = 150; 238 t3 = 6000; 239 } 240 241 if (pw <= 1) { 242 wd->pulse_val = 0; 243 } else if (pw <= t1) { 244 wd->pulse_val = 1; 245 } else if (pw <= t2) { 246 wd->pulse_val = 2; 247 } else if (pw <= t3) { 248 wd->pulse_val = 3; 249 } else { 250 pr_err("pulse width out of range\n"); 251 return -EINVAL; 252 } 253 254 wd->pulse_mode = pw; 255 256 return 0; 257 } 258 259 static int fintek_wdt_keepalive(struct watchdog_device *wdd) 260 { 261 struct fintek_wdt *wd = watchdog_get_drvdata(wdd); 262 int err; 263 264 err = superio_enter(wd->sioaddr); 265 if (err) 266 return err; 267 superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); 268 269 if (wd->minutes_mode) 270 /* select minutes for timer units */ 271 superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, 272 F71808FG_FLAG_WD_UNIT); 273 else 274 /* select seconds for timer units */ 275 superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, 276 F71808FG_FLAG_WD_UNIT); 277 278 /* Set timer value */ 279 superio_outb(wd->sioaddr, F71808FG_REG_WD_TIME, 280 wd->timer_val); 281 282 superio_exit(wd->sioaddr); 283 284 return 0; 285 } 286 287 static int fintek_wdt_start(struct watchdog_device *wdd) 288 { 289 struct fintek_wdt *wd = watchdog_get_drvdata(wdd); 290 int err; 291 u8 tmp; 292 293 /* Make sure we don't die as soon as the watchdog is enabled below */ 294 err = fintek_wdt_keepalive(wdd); 295 if (err) 296 return err; 297 298 err = superio_enter(wd->sioaddr); 299 if (err) 300 return err; 301 superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); 302 303 /* Watchdog pin configuration */ 304 switch (wd->type) { 305 case f71808fg: 306 /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */ 307 superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT2, 3); 308 superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 3); 309 break; 310 311 case f71862fg: 312 if (f71862fg_pin == 63) { 313 /* SPI must be disabled first to use this pin! */ 314 superio_clear_bit(wd->sioaddr, SIO_REG_ROM_ADDR_SEL, 6); 315 superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT3, 4); 316 } else if (f71862fg_pin == 56) { 317 superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1); 318 } 319 break; 320 321 case f71868: 322 case f71869: 323 /* GPIO14 --> WDTRST# */ 324 superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT1, 4); 325 break; 326 327 case f71882fg: 328 /* Set pin 56 to WDTRST# */ 329 superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1); 330 break; 331 332 case f71889fg: 333 /* set pin 40 to WDTRST# */ 334 superio_outb(wd->sioaddr, SIO_REG_MFUNCT3, 335 superio_inb(wd->sioaddr, SIO_REG_MFUNCT3) & 0xcf); 336 break; 337 338 case f81803: 339 /* Enable TSI Level register bank */ 340 superio_clear_bit(wd->sioaddr, SIO_REG_CLOCK_SEL, 3); 341 /* Set pin 27 to WDTRST# */ 342 superio_outb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL, 0x5f & 343 superio_inb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL)); 344 break; 345 346 case f81865: 347 /* Set pin 70 to WDTRST# */ 348 superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 5); 349 break; 350 351 case f81866: 352 case f81966: 353 /* 354 * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0. 355 * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch: 356 * BIT5: 0 -> WDTRST# 357 * 1 -> GPIO15 358 */ 359 tmp = superio_inb(wd->sioaddr, SIO_F81866_REG_PORT_SEL); 360 tmp &= ~(BIT(3) | BIT(0)); 361 tmp |= BIT(2); 362 superio_outb(wd->sioaddr, SIO_F81866_REG_PORT_SEL, tmp); 363 364 superio_clear_bit(wd->sioaddr, SIO_F81866_REG_GPIO1, 5); 365 break; 366 367 default: 368 /* 369 * 'default' label to shut up the compiler and catch 370 * programmer errors 371 */ 372 err = -ENODEV; 373 goto exit_superio; 374 } 375 376 superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); 377 superio_set_bit(wd->sioaddr, SIO_REG_ENABLE, 0); 378 379 if (wd->type == f81865 || wd->type == f81866 || wd->type == f81966) 380 superio_set_bit(wd->sioaddr, F81865_REG_WDO_CONF, 381 F81865_FLAG_WDOUT_EN); 382 else 383 superio_set_bit(wd->sioaddr, F71808FG_REG_WDO_CONF, 384 F71808FG_FLAG_WDOUT_EN); 385 386 superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, 387 F71808FG_FLAG_WD_EN); 388 389 if (wd->pulse_mode) { 390 /* Select "pulse" output mode with given duration */ 391 u8 wdt_conf = superio_inb(wd->sioaddr, 392 F71808FG_REG_WDT_CONF); 393 394 /* Set WD_PSWIDTH bits (1:0) */ 395 wdt_conf = (wdt_conf & 0xfc) | (wd->pulse_val & 0x03); 396 /* Set WD_PULSE to "pulse" mode */ 397 wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE); 398 399 superio_outb(wd->sioaddr, F71808FG_REG_WDT_CONF, 400 wdt_conf); 401 } else { 402 /* Select "level" output mode */ 403 superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, 404 F71808FG_FLAG_WD_PULSE); 405 } 406 407 exit_superio: 408 superio_exit(wd->sioaddr); 409 410 return err; 411 } 412 413 static int fintek_wdt_stop(struct watchdog_device *wdd) 414 { 415 struct fintek_wdt *wd = watchdog_get_drvdata(wdd); 416 int err; 417 418 err = superio_enter(wd->sioaddr); 419 if (err) 420 return err; 421 superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); 422 423 superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF, 424 F71808FG_FLAG_WD_EN); 425 426 superio_exit(wd->sioaddr); 427 428 return 0; 429 } 430 431 static bool fintek_wdt_is_running(struct fintek_wdt *wd, u8 wdt_conf) 432 { 433 return (superio_inb(wd->sioaddr, SIO_REG_ENABLE) & BIT(0)) 434 && (wdt_conf & BIT(F71808FG_FLAG_WD_EN)); 435 } 436 437 static const struct watchdog_ops fintek_wdt_ops = { 438 .owner = THIS_MODULE, 439 .start = fintek_wdt_start, 440 .stop = fintek_wdt_stop, 441 .ping = fintek_wdt_keepalive, 442 .set_timeout = fintek_wdt_set_timeout, 443 }; 444 445 static int fintek_wdt_probe(struct platform_device *pdev) 446 { 447 struct device *dev = &pdev->dev; 448 struct fintek_wdt_pdata *pdata; 449 struct watchdog_device *wdd; 450 struct fintek_wdt *wd; 451 int wdt_conf, err = 0; 452 struct resource *res; 453 int sioaddr; 454 455 res = platform_get_resource(pdev, IORESOURCE_IO, 0); 456 if (!res) 457 return -ENXIO; 458 459 sioaddr = res->start; 460 461 wd = devm_kzalloc(dev, sizeof(*wd), GFP_KERNEL); 462 if (!wd) 463 return -ENOMEM; 464 465 pdata = dev->platform_data; 466 467 wd->type = pdata->type; 468 wd->sioaddr = sioaddr; 469 wd->ident.options = WDIOF_SETTIMEOUT 470 | WDIOF_MAGICCLOSE 471 | WDIOF_KEEPALIVEPING 472 | WDIOF_CARDRESET; 473 474 snprintf(wd->ident.identity, 475 sizeof(wd->ident.identity), "%s watchdog", 476 fintek_wdt_names[wd->type]); 477 478 err = superio_enter(sioaddr); 479 if (err) 480 return err; 481 superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); 482 483 wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF); 484 485 /* 486 * We don't want WDTMOUT_STS to stick around till regular reboot. 487 * Write 1 to the bit to clear it to zero. 488 */ 489 superio_outb(sioaddr, F71808FG_REG_WDT_CONF, 490 wdt_conf | BIT(F71808FG_FLAG_WDTMOUT_STS)); 491 492 wdd = &wd->wdd; 493 494 if (fintek_wdt_is_running(wd, wdt_conf)) 495 set_bit(WDOG_HW_RUNNING, &wdd->status); 496 497 superio_exit(sioaddr); 498 499 wdd->parent = dev; 500 wdd->info = &wd->ident; 501 wdd->ops = &fintek_wdt_ops; 502 wdd->min_timeout = 1; 503 wdd->max_timeout = WATCHDOG_MAX_TIMEOUT; 504 505 watchdog_set_drvdata(wdd, wd); 506 watchdog_set_nowayout(wdd, nowayout); 507 watchdog_stop_on_unregister(wdd); 508 watchdog_stop_on_reboot(wdd); 509 watchdog_init_timeout(wdd, start_withtimeout ?: timeout, NULL); 510 511 if (wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS)) 512 wdd->bootstatus = WDIOF_CARDRESET; 513 514 /* 515 * WATCHDOG_HANDLE_BOOT_ENABLED can result in keepalive being directly 516 * called without a set_timeout before, so it needs to be done here 517 * unconditionally. 518 */ 519 fintek_wdt_set_timeout(wdd, wdd->timeout); 520 fintek_wdt_set_pulse_width(wd, pulse_width); 521 522 if (start_withtimeout) { 523 err = fintek_wdt_start(wdd); 524 if (err) { 525 dev_err(dev, "cannot start watchdog timer\n"); 526 return err; 527 } 528 529 set_bit(WDOG_HW_RUNNING, &wdd->status); 530 dev_info(dev, "watchdog started with initial timeout of %u sec\n", 531 start_withtimeout); 532 } 533 534 return devm_watchdog_register_device(dev, wdd); 535 } 536 537 static int __init fintek_wdt_find(int sioaddr) 538 { 539 enum chips type; 540 u16 devid; 541 int err = superio_enter(sioaddr); 542 if (err) 543 return err; 544 545 devid = superio_inw(sioaddr, SIO_REG_MANID); 546 if (devid != SIO_FINTEK_ID) { 547 pr_debug("Not a Fintek device\n"); 548 err = -ENODEV; 549 goto exit; 550 } 551 552 devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); 553 switch (devid) { 554 case SIO_F71808_ID: 555 type = f71808fg; 556 break; 557 case SIO_F71862_ID: 558 type = f71862fg; 559 break; 560 case SIO_F71868_ID: 561 type = f71868; 562 break; 563 case SIO_F71869_ID: 564 case SIO_F71869A_ID: 565 type = f71869; 566 break; 567 case SIO_F71882_ID: 568 type = f71882fg; 569 break; 570 case SIO_F71889_ID: 571 type = f71889fg; 572 break; 573 case SIO_F71858_ID: 574 /* Confirmed (by datasheet) not to have a watchdog. */ 575 err = -ENODEV; 576 goto exit; 577 case SIO_F81803_ID: 578 type = f81803; 579 break; 580 case SIO_F81865_ID: 581 type = f81865; 582 break; 583 case SIO_F81866_ID: 584 type = f81866; 585 break; 586 case SIO_F81966_ID: 587 type = f81966; 588 break; 589 default: 590 pr_info("Unrecognized Fintek device: %04x\n", 591 (unsigned int)devid); 592 err = -ENODEV; 593 goto exit; 594 } 595 596 pr_info("Found %s watchdog chip, revision %d\n", 597 fintek_wdt_names[type], 598 (int)superio_inb(sioaddr, SIO_REG_DEVREV)); 599 600 exit: 601 superio_exit(sioaddr); 602 return err ? err : type; 603 } 604 605 static struct platform_driver fintek_wdt_driver = { 606 .probe = fintek_wdt_probe, 607 .driver = { 608 .name = DRVNAME, 609 }, 610 }; 611 612 static struct platform_device *fintek_wdt_pdev; 613 614 static int __init fintek_wdt_init(void) 615 { 616 static const unsigned short addrs[] = { 0x2e, 0x4e }; 617 struct fintek_wdt_pdata pdata; 618 struct resource wdt_res = {}; 619 int ret; 620 int i; 621 622 if (f71862fg_pin != 63 && f71862fg_pin != 56) { 623 pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin); 624 return -EINVAL; 625 } 626 627 for (i = 0; i < ARRAY_SIZE(addrs); i++) { 628 ret = fintek_wdt_find(addrs[i]); 629 if (ret >= 0) 630 break; 631 } 632 if (i == ARRAY_SIZE(addrs)) 633 return ret; 634 635 pdata.type = ret; 636 637 platform_driver_register(&fintek_wdt_driver); 638 639 wdt_res.name = "superio port"; 640 wdt_res.flags = IORESOURCE_IO; 641 wdt_res.start = addrs[i]; 642 wdt_res.end = addrs[i] + 1; 643 644 fintek_wdt_pdev = platform_device_register_resndata(NULL, DRVNAME, -1, 645 &wdt_res, 1, 646 &pdata, sizeof(pdata)); 647 if (IS_ERR(fintek_wdt_pdev)) { 648 platform_driver_unregister(&fintek_wdt_driver); 649 return PTR_ERR(fintek_wdt_pdev); 650 } 651 652 return 0; 653 } 654 655 static void __exit fintek_wdt_exit(void) 656 { 657 platform_device_unregister(fintek_wdt_pdev); 658 platform_driver_unregister(&fintek_wdt_driver); 659 } 660 661 MODULE_DESCRIPTION("F71808E Watchdog Driver"); 662 MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>"); 663 MODULE_LICENSE("GPL"); 664 665 module_init(fintek_wdt_init); 666 module_exit(fintek_wdt_exit); 667