1 /*
2  *	Watchdog for the 7101 PMU version found in the ALi M1535 chipsets
3  *
4  *	This program is free software; you can redistribute it and/or
5  *	modify it under the terms of the GNU General Public License
6  *	as published by the Free Software Foundation; either version
7  *	2 of the License, or (at your option) any later version.
8  */
9 
10 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
11 
12 #include <linux/module.h>
13 #include <linux/moduleparam.h>
14 #include <linux/types.h>
15 #include <linux/miscdevice.h>
16 #include <linux/watchdog.h>
17 #include <linux/ioport.h>
18 #include <linux/notifier.h>
19 #include <linux/reboot.h>
20 #include <linux/init.h>
21 #include <linux/fs.h>
22 #include <linux/pci.h>
23 #include <linux/uaccess.h>
24 #include <linux/io.h>
25 
26 #define WATCHDOG_NAME "ALi_M1535"
27 #define WATCHDOG_TIMEOUT 60	/* 60 sec default timeout */
28 
29 /* internal variables */
30 static unsigned long ali_is_open;
31 static char ali_expect_release;
32 static struct pci_dev *ali_pci;
33 static u32 ali_timeout_bits;		/* stores the computed timeout */
34 static DEFINE_SPINLOCK(ali_lock);	/* Guards the hardware */
35 
36 /* module parameters */
37 static int timeout = WATCHDOG_TIMEOUT;
38 module_param(timeout, int, 0);
39 MODULE_PARM_DESC(timeout,
40 		"Watchdog timeout in seconds. (0 < timeout < 18000, default="
41 				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
42 
43 static bool nowayout = WATCHDOG_NOWAYOUT;
44 module_param(nowayout, bool, 0);
45 MODULE_PARM_DESC(nowayout,
46 		"Watchdog cannot be stopped once started (default="
47 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
48 
49 /*
50  *	ali_start	-	start watchdog countdown
51  *
52  *	Starts the timer running providing the timer has a counter
53  *	configuration set.
54  */
55 
56 static void ali_start(void)
57 {
58 	u32 val;
59 
60 	spin_lock(&ali_lock);
61 
62 	pci_read_config_dword(ali_pci, 0xCC, &val);
63 	val &= ~0x3F;	/* Mask count */
64 	val |= (1 << 25) | ali_timeout_bits;
65 	pci_write_config_dword(ali_pci, 0xCC, val);
66 
67 	spin_unlock(&ali_lock);
68 }
69 
70 /*
71  *	ali_stop	-	stop the timer countdown
72  *
73  *	Stop the ALi watchdog countdown
74  */
75 
76 static void ali_stop(void)
77 {
78 	u32 val;
79 
80 	spin_lock(&ali_lock);
81 
82 	pci_read_config_dword(ali_pci, 0xCC, &val);
83 	val &= ~0x3F;		/* Mask count to zero (disabled) */
84 	val &= ~(1 << 25);	/* and for safety mask the reset enable */
85 	pci_write_config_dword(ali_pci, 0xCC, val);
86 
87 	spin_unlock(&ali_lock);
88 }
89 
90 /*
91  *	ali_keepalive	-	send a keepalive to the watchdog
92  *
93  *	Send a keepalive to the timer (actually we restart the timer).
94  */
95 
96 static void ali_keepalive(void)
97 {
98 	ali_start();
99 }
100 
101 /*
102  *	ali_settimer	-	compute the timer reload value
103  *	@t: time in seconds
104  *
105  *	Computes the timeout values needed
106  */
107 
108 static int ali_settimer(int t)
109 {
110 	if (t < 0)
111 		return -EINVAL;
112 	else if (t < 60)
113 		ali_timeout_bits = t|(1 << 6);
114 	else if (t < 3600)
115 		ali_timeout_bits = (t / 60)|(1 << 7);
116 	else if (t < 18000)
117 		ali_timeout_bits = (t / 300)|(1 << 6)|(1 << 7);
118 	else
119 		return -EINVAL;
120 
121 	timeout = t;
122 	return 0;
123 }
124 
125 /*
126  *	/dev/watchdog handling
127  */
128 
129 /*
130  *	ali_write	-	writes to ALi watchdog
131  *	@file: file from VFS
132  *	@data: user address of data
133  *	@len: length of data
134  *	@ppos: pointer to the file offset
135  *
136  *	Handle a write to the ALi watchdog. Writing to the file pings
137  *	the watchdog and resets it. Writing the magic 'V' sequence allows
138  *	the next close to turn off the watchdog.
139  */
140 
141 static ssize_t ali_write(struct file *file, const char __user *data,
142 						size_t len, loff_t *ppos)
143 {
144 	/* See if we got the magic character 'V' and reload the timer */
145 	if (len) {
146 		if (!nowayout) {
147 			size_t i;
148 
149 			/* note: just in case someone wrote the
150 			   magic character five months ago... */
151 			ali_expect_release = 0;
152 
153 			/* scan to see whether or not we got
154 			   the magic character */
155 			for (i = 0; i != len; i++) {
156 				char c;
157 				if (get_user(c, data + i))
158 					return -EFAULT;
159 				if (c == 'V')
160 					ali_expect_release = 42;
161 			}
162 		}
163 
164 		/* someone wrote to us, we should reload the timer */
165 		ali_start();
166 	}
167 	return len;
168 }
169 
170 /*
171  *	ali_ioctl	-	handle watchdog ioctls
172  *	@file: VFS file pointer
173  *	@cmd: ioctl number
174  *	@arg: arguments to the ioctl
175  *
176  *	Handle the watchdog ioctls supported by the ALi driver. Really
177  *	we want an extension to enable irq ack monitoring and the like
178  */
179 
180 static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
181 {
182 	void __user *argp = (void __user *)arg;
183 	int __user *p = argp;
184 	static const struct watchdog_info ident = {
185 		.options =		WDIOF_KEEPALIVEPING |
186 					WDIOF_SETTIMEOUT |
187 					WDIOF_MAGICCLOSE,
188 		.firmware_version =	0,
189 		.identity =		"ALi M1535 WatchDog Timer",
190 	};
191 
192 	switch (cmd) {
193 	case WDIOC_GETSUPPORT:
194 		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
195 
196 	case WDIOC_GETSTATUS:
197 	case WDIOC_GETBOOTSTATUS:
198 		return put_user(0, p);
199 	case WDIOC_SETOPTIONS:
200 	{
201 		int new_options, retval = -EINVAL;
202 
203 		if (get_user(new_options, p))
204 			return -EFAULT;
205 		if (new_options & WDIOS_DISABLECARD) {
206 			ali_stop();
207 			retval = 0;
208 		}
209 		if (new_options & WDIOS_ENABLECARD) {
210 			ali_start();
211 			retval = 0;
212 		}
213 		return retval;
214 	}
215 	case WDIOC_KEEPALIVE:
216 		ali_keepalive();
217 		return 0;
218 	case WDIOC_SETTIMEOUT:
219 	{
220 		int new_timeout;
221 		if (get_user(new_timeout, p))
222 			return -EFAULT;
223 		if (ali_settimer(new_timeout))
224 			return -EINVAL;
225 		ali_keepalive();
226 		/* Fall */
227 	}
228 	case WDIOC_GETTIMEOUT:
229 		return put_user(timeout, p);
230 	default:
231 		return -ENOTTY;
232 	}
233 }
234 
235 /*
236  *	ali_open	-	handle open of ali watchdog
237  *	@inode: inode from VFS
238  *	@file: file from VFS
239  *
240  *	Open the ALi watchdog device. Ensure only one person opens it
241  *	at a time. Also start the watchdog running.
242  */
243 
244 static int ali_open(struct inode *inode, struct file *file)
245 {
246 	/* /dev/watchdog can only be opened once */
247 	if (test_and_set_bit(0, &ali_is_open))
248 		return -EBUSY;
249 
250 	/* Activate */
251 	ali_start();
252 	return nonseekable_open(inode, file);
253 }
254 
255 /*
256  *	ali_release	-	close an ALi watchdog
257  *	@inode: inode from VFS
258  *	@file: file from VFS
259  *
260  *	Close the ALi watchdog device. Actual shutdown of the timer
261  *	only occurs if the magic sequence has been set.
262  */
263 
264 static int ali_release(struct inode *inode, struct file *file)
265 {
266 	/*
267 	 *      Shut off the timer.
268 	 */
269 	if (ali_expect_release == 42)
270 		ali_stop();
271 	else {
272 		pr_crit("Unexpected close, not stopping watchdog!\n");
273 		ali_keepalive();
274 	}
275 	clear_bit(0, &ali_is_open);
276 	ali_expect_release = 0;
277 	return 0;
278 }
279 
280 /*
281  *	ali_notify_sys	-	System down notifier
282  *
283  *	Notifier for system down
284  */
285 
286 
287 static int ali_notify_sys(struct notifier_block *this,
288 					unsigned long code, void *unused)
289 {
290 	if (code == SYS_DOWN || code == SYS_HALT)
291 		ali_stop();		/* Turn the WDT off */
292 	return NOTIFY_DONE;
293 }
294 
295 /*
296  *	Data for PCI driver interface
297  *
298  *	This data only exists for exporting the supported
299  *	PCI ids via MODULE_DEVICE_TABLE.  We do not actually
300  *	register a pci_driver, because someone else might one day
301  *	want to register another driver on the same PCI id.
302  */
303 
304 static DEFINE_PCI_DEVICE_TABLE(ali_pci_tbl) __used = {
305 	{ PCI_VENDOR_ID_AL, 0x1533, PCI_ANY_ID, PCI_ANY_ID,},
306 	{ PCI_VENDOR_ID_AL, 0x1535, PCI_ANY_ID, PCI_ANY_ID,},
307 	{ 0, },
308 };
309 MODULE_DEVICE_TABLE(pci, ali_pci_tbl);
310 
311 /*
312  *	ali_find_watchdog	-	find a 1535 and 7101
313  *
314  *	Scans the PCI hardware for a 1535 series bridge and matching 7101
315  *	watchdog device. This may be overtight but it is better to be safe
316  */
317 
318 static int __init ali_find_watchdog(void)
319 {
320 	struct pci_dev *pdev;
321 	u32 wdog;
322 
323 	/* Check for a 1533/1535 series bridge */
324 	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1535, NULL);
325 	if (pdev == NULL)
326 		pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1533, NULL);
327 	if (pdev == NULL)
328 		return -ENODEV;
329 	pci_dev_put(pdev);
330 
331 	/* Check for the a 7101 PMU */
332 	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
333 	if (pdev == NULL)
334 		return -ENODEV;
335 
336 	if (pci_enable_device(pdev)) {
337 		pci_dev_put(pdev);
338 		return -EIO;
339 	}
340 
341 	ali_pci = pdev;
342 
343 	/*
344 	 *	Initialize the timer bits
345 	 */
346 	pci_read_config_dword(pdev, 0xCC, &wdog);
347 
348 	/* Timer bits */
349 	wdog &= ~0x3F;
350 	/* Issued events */
351 	wdog &= ~((1 << 27)|(1 << 26)|(1 << 25)|(1 << 24));
352 	/* No monitor bits */
353 	wdog &= ~((1 << 16)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9));
354 
355 	pci_write_config_dword(pdev, 0xCC, wdog);
356 
357 	return 0;
358 }
359 
360 /*
361  *	Kernel Interfaces
362  */
363 
364 static const struct file_operations ali_fops = {
365 	.owner		=	THIS_MODULE,
366 	.llseek		=	no_llseek,
367 	.write		=	ali_write,
368 	.unlocked_ioctl =	ali_ioctl,
369 	.open		=	ali_open,
370 	.release	=	ali_release,
371 };
372 
373 static struct miscdevice ali_miscdev = {
374 	.minor =	WATCHDOG_MINOR,
375 	.name =		"watchdog",
376 	.fops =		&ali_fops,
377 };
378 
379 static struct notifier_block ali_notifier = {
380 	.notifier_call =	ali_notify_sys,
381 };
382 
383 /*
384  *	watchdog_init	-	module initialiser
385  *
386  *	Scan for a suitable watchdog and if so initialize it. Return an error
387  *	if we cannot, the error causes the module to unload
388  */
389 
390 static int __init watchdog_init(void)
391 {
392 	int ret;
393 
394 	/* Check whether or not the hardware watchdog is there */
395 	if (ali_find_watchdog() != 0)
396 		return -ENODEV;
397 
398 	/* Check that the timeout value is within it's range;
399 	   if not reset to the default */
400 	if (timeout < 1 || timeout >= 18000) {
401 		timeout = WATCHDOG_TIMEOUT;
402 		pr_info("timeout value must be 0 < timeout < 18000, using %d\n",
403 			timeout);
404 	}
405 
406 	/* Calculate the watchdog's timeout */
407 	ali_settimer(timeout);
408 
409 	ret = register_reboot_notifier(&ali_notifier);
410 	if (ret != 0) {
411 		pr_err("cannot register reboot notifier (err=%d)\n", ret);
412 		goto out;
413 	}
414 
415 	ret = misc_register(&ali_miscdev);
416 	if (ret != 0) {
417 		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
418 		       WATCHDOG_MINOR, ret);
419 		goto unreg_reboot;
420 	}
421 
422 	pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
423 		timeout, nowayout);
424 
425 out:
426 	return ret;
427 unreg_reboot:
428 	unregister_reboot_notifier(&ali_notifier);
429 	goto out;
430 }
431 
432 /*
433  *	watchdog_exit	-	module de-initialiser
434  *
435  *	Called while unloading a successfully installed watchdog module.
436  */
437 
438 static void __exit watchdog_exit(void)
439 {
440 	/* Stop the timer before we leave */
441 	ali_stop();
442 
443 	/* Deregister */
444 	misc_deregister(&ali_miscdev);
445 	unregister_reboot_notifier(&ali_notifier);
446 	pci_dev_put(ali_pci);
447 }
448 
449 module_init(watchdog_init);
450 module_exit(watchdog_exit);
451 
452 MODULE_AUTHOR("Alan Cox");
453 MODULE_DESCRIPTION("ALi M1535 PMU Watchdog Timer driver");
454 MODULE_LICENSE("GPL");
455 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
456