xref: /openbmc/linux/drivers/watchdog/alim1535_wdt.c (revision b8bb76713ec50df2f11efee386e16f93d51e1076)
1 /*
2  *	Watchdog for the 7101 PMU version found in the ALi M1535 chipsets
3  *
4  *	This program is free software; you can redistribute it and/or
5  *	modify it under the terms of the GNU General Public License
6  *	as published by the Free Software Foundation; either version
7  *	2 of the License, or (at your option) any later version.
8  */
9 
10 #include <linux/module.h>
11 #include <linux/moduleparam.h>
12 #include <linux/types.h>
13 #include <linux/miscdevice.h>
14 #include <linux/watchdog.h>
15 #include <linux/ioport.h>
16 #include <linux/notifier.h>
17 #include <linux/reboot.h>
18 #include <linux/init.h>
19 #include <linux/fs.h>
20 #include <linux/pci.h>
21 #include <linux/uaccess.h>
22 #include <linux/io.h>
23 
24 #define WATCHDOG_NAME "ALi_M1535"
25 #define PFX WATCHDOG_NAME ": "
26 #define WATCHDOG_TIMEOUT 60	/* 60 sec default timeout */
27 
28 /* internal variables */
29 static unsigned long ali_is_open;
30 static char ali_expect_release;
31 static struct pci_dev *ali_pci;
32 static u32 ali_timeout_bits;		/* stores the computed timeout */
33 static DEFINE_SPINLOCK(ali_lock);	/* Guards the hardware */
34 
35 /* module parameters */
36 static int timeout = WATCHDOG_TIMEOUT;
37 module_param(timeout, int, 0);
38 MODULE_PARM_DESC(timeout,
39 		"Watchdog timeout in seconds. (0 < timeout < 18000, default="
40 				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
41 
42 static int nowayout = WATCHDOG_NOWAYOUT;
43 module_param(nowayout, int, 0);
44 MODULE_PARM_DESC(nowayout,
45 		"Watchdog cannot be stopped once started (default="
46 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
47 
48 /*
49  *	ali_start	-	start watchdog countdown
50  *
51  *	Starts the timer running providing the timer has a counter
52  *	configuration set.
53  */
54 
55 static void ali_start(void)
56 {
57 	u32 val;
58 
59 	spin_lock(&ali_lock);
60 
61 	pci_read_config_dword(ali_pci, 0xCC, &val);
62 	val &= ~0x3F;	/* Mask count */
63 	val |= (1 << 25) | ali_timeout_bits;
64 	pci_write_config_dword(ali_pci, 0xCC, val);
65 
66 	spin_unlock(&ali_lock);
67 }
68 
69 /*
70  *	ali_stop	-	stop the timer countdown
71  *
72  *	Stop the ALi watchdog countdown
73  */
74 
75 static void ali_stop(void)
76 {
77 	u32 val;
78 
79 	spin_lock(&ali_lock);
80 
81 	pci_read_config_dword(ali_pci, 0xCC, &val);
82 	val &= ~0x3F;		/* Mask count to zero (disabled) */
83 	val &= ~(1 << 25);	/* and for safety mask the reset enable */
84 	pci_write_config_dword(ali_pci, 0xCC, val);
85 
86 	spin_unlock(&ali_lock);
87 }
88 
89 /*
90  *	ali_keepalive	-	send a keepalive to the watchdog
91  *
92  *	Send a keepalive to the timer (actually we restart the timer).
93  */
94 
95 static void ali_keepalive(void)
96 {
97 	ali_start();
98 }
99 
100 /*
101  *	ali_settimer	-	compute the timer reload value
102  *	@t: time in seconds
103  *
104  *	Computes the timeout values needed
105  */
106 
107 static int ali_settimer(int t)
108 {
109 	if (t < 0)
110 		return -EINVAL;
111 	else if (t < 60)
112 		ali_timeout_bits = t|(1 << 6);
113 	else if (t < 3600)
114 		ali_timeout_bits = (t / 60)|(1 << 7);
115 	else if (t < 18000)
116 		ali_timeout_bits = (t / 300)|(1 << 6)|(1 << 7);
117 	else
118 		return -EINVAL;
119 
120 	timeout = t;
121 	return 0;
122 }
123 
124 /*
125  *	/dev/watchdog handling
126  */
127 
128 /*
129  *	ali_write	-	writes to ALi watchdog
130  *	@file: file from VFS
131  *	@data: user address of data
132  *	@len: length of data
133  *	@ppos: pointer to the file offset
134  *
135  *	Handle a write to the ALi watchdog. Writing to the file pings
136  *	the watchdog and resets it. Writing the magic 'V' sequence allows
137  *	the next close to turn off the watchdog.
138  */
139 
140 static ssize_t ali_write(struct file *file, const char __user *data,
141 						size_t len, loff_t *ppos)
142 {
143 	/* See if we got the magic character 'V' and reload the timer */
144 	if (len) {
145 		if (!nowayout) {
146 			size_t i;
147 
148 			/* note: just in case someone wrote the
149 			   magic character five months ago... */
150 			ali_expect_release = 0;
151 
152 			/* scan to see whether or not we got
153 			   the magic character */
154 			for (i = 0; i != len; i++) {
155 				char c;
156 				if (get_user(c, data + i))
157 					return -EFAULT;
158 				if (c == 'V')
159 					ali_expect_release = 42;
160 			}
161 		}
162 
163 		/* someone wrote to us, we should reload the timer */
164 		ali_start();
165 	}
166 	return len;
167 }
168 
169 /*
170  *	ali_ioctl	-	handle watchdog ioctls
171  *	@file: VFS file pointer
172  *	@cmd: ioctl number
173  *	@arg: arguments to the ioctl
174  *
175  *	Handle the watchdog ioctls supported by the ALi driver. Really
176  *	we want an extension to enable irq ack monitoring and the like
177  */
178 
179 static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
180 {
181 	void __user *argp = (void __user *)arg;
182 	int __user *p = argp;
183 	static struct watchdog_info ident = {
184 		.options =		WDIOF_KEEPALIVEPING |
185 					WDIOF_SETTIMEOUT |
186 					WDIOF_MAGICCLOSE,
187 		.firmware_version =	0,
188 		.identity =		"ALi M1535 WatchDog Timer",
189 	};
190 
191 	switch (cmd) {
192 	case WDIOC_GETSUPPORT:
193 		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
194 
195 	case WDIOC_GETSTATUS:
196 	case WDIOC_GETBOOTSTATUS:
197 		return put_user(0, p);
198 	case WDIOC_SETOPTIONS:
199 	{
200 		int new_options, retval = -EINVAL;
201 
202 		if (get_user(new_options, p))
203 			return -EFAULT;
204 		if (new_options & WDIOS_DISABLECARD) {
205 			ali_stop();
206 			retval = 0;
207 		}
208 		if (new_options & WDIOS_ENABLECARD) {
209 			ali_start();
210 			retval = 0;
211 		}
212 		return retval;
213 	}
214 	case WDIOC_KEEPALIVE:
215 		ali_keepalive();
216 		return 0;
217 	case WDIOC_SETTIMEOUT:
218 	{
219 		int new_timeout;
220 		if (get_user(new_timeout, p))
221 			return -EFAULT;
222 		if (ali_settimer(new_timeout))
223 			return -EINVAL;
224 		ali_keepalive();
225 		/* Fall */
226 	}
227 	case WDIOC_GETTIMEOUT:
228 		return put_user(timeout, p);
229 	default:
230 		return -ENOTTY;
231 	}
232 }
233 
234 /*
235  *	ali_open	-	handle open of ali watchdog
236  *	@inode: inode from VFS
237  *	@file: file from VFS
238  *
239  *	Open the ALi watchdog device. Ensure only one person opens it
240  *	at a time. Also start the watchdog running.
241  */
242 
243 static int ali_open(struct inode *inode, struct file *file)
244 {
245 	/* /dev/watchdog can only be opened once */
246 	if (test_and_set_bit(0, &ali_is_open))
247 		return -EBUSY;
248 
249 	/* Activate */
250 	ali_start();
251 	return nonseekable_open(inode, file);
252 }
253 
254 /*
255  *	ali_release	-	close an ALi watchdog
256  *	@inode: inode from VFS
257  *	@file: file from VFS
258  *
259  *	Close the ALi watchdog device. Actual shutdown of the timer
260  *	only occurs if the magic sequence has been set.
261  */
262 
263 static int ali_release(struct inode *inode, struct file *file)
264 {
265 	/*
266 	 *      Shut off the timer.
267 	 */
268 	if (ali_expect_release == 42)
269 		ali_stop();
270 	else {
271 		printk(KERN_CRIT PFX
272 				"Unexpected close, not stopping watchdog!\n");
273 		ali_keepalive();
274 	}
275 	clear_bit(0, &ali_is_open);
276 	ali_expect_release = 0;
277 	return 0;
278 }
279 
280 /*
281  *	ali_notify_sys	-	System down notifier
282  *
283  *	Notifier for system down
284  */
285 
286 
287 static int ali_notify_sys(struct notifier_block *this,
288 					unsigned long code, void *unused)
289 {
290 	if (code == SYS_DOWN || code == SYS_HALT)
291 		ali_stop();		/* Turn the WDT off */
292 	return NOTIFY_DONE;
293 }
294 
295 /*
296  *	Data for PCI driver interface
297  *
298  *	This data only exists for exporting the supported
299  *	PCI ids via MODULE_DEVICE_TABLE.  We do not actually
300  *	register a pci_driver, because someone else might one day
301  *	want to register another driver on the same PCI id.
302  */
303 
304 static struct pci_device_id ali_pci_tbl[] = {
305 	{ PCI_VENDOR_ID_AL, 0x1533, PCI_ANY_ID, PCI_ANY_ID,},
306 	{ PCI_VENDOR_ID_AL, 0x1535, PCI_ANY_ID, PCI_ANY_ID,},
307 	{ 0, },
308 };
309 MODULE_DEVICE_TABLE(pci, ali_pci_tbl);
310 
311 /*
312  *	ali_find_watchdog	-	find a 1535 and 7101
313  *
314  *	Scans the PCI hardware for a 1535 series bridge and matching 7101
315  *	watchdog device. This may be overtight but it is better to be safe
316  */
317 
318 static int __init ali_find_watchdog(void)
319 {
320 	struct pci_dev *pdev;
321 	u32 wdog;
322 
323 	/* Check for a 1533/1535 series bridge */
324 	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1535, NULL);
325 	if (pdev == NULL)
326 		pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1533, NULL);
327 	if (pdev == NULL)
328 		return -ENODEV;
329 	pci_dev_put(pdev);
330 
331 	/* Check for the a 7101 PMU */
332 	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
333 	if (pdev == NULL)
334 		return -ENODEV;
335 
336 	if (pci_enable_device(pdev)) {
337 		pci_dev_put(pdev);
338 		return -EIO;
339 	}
340 
341 	ali_pci = pdev;
342 
343 	/*
344 	 *	Initialize the timer bits
345 	 */
346 	pci_read_config_dword(pdev, 0xCC, &wdog);
347 
348 	/* Timer bits */
349 	wdog &= ~0x3F;
350 	/* Issued events */
351 	wdog &= ~((1 << 27)|(1 << 26)|(1 << 25)|(1 << 24));
352 	/* No monitor bits */
353 	wdog &= ~((1 << 16)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9));
354 
355 	pci_write_config_dword(pdev, 0xCC, wdog);
356 
357 	return 0;
358 }
359 
360 /*
361  *	Kernel Interfaces
362  */
363 
364 static const struct file_operations ali_fops = {
365 	.owner 		=	THIS_MODULE,
366 	.llseek 	=	no_llseek,
367 	.write		=	ali_write,
368 	.unlocked_ioctl =	ali_ioctl,
369 	.open 		=	ali_open,
370 	.release 	=	ali_release,
371 };
372 
373 static struct miscdevice ali_miscdev = {
374 	.minor =	WATCHDOG_MINOR,
375 	.name =		"watchdog",
376 	.fops =		&ali_fops,
377 };
378 
379 static struct notifier_block ali_notifier = {
380 	.notifier_call =	ali_notify_sys,
381 };
382 
383 /*
384  *	watchdog_init	-	module initialiser
385  *
386  *	Scan for a suitable watchdog and if so initialize it. Return an error
387  *	if we cannot, the error causes the module to unload
388  */
389 
390 static int __init watchdog_init(void)
391 {
392 	int ret;
393 
394 	/* Check whether or not the hardware watchdog is there */
395 	if (ali_find_watchdog() != 0)
396 		return -ENODEV;
397 
398 	/* Check that the timeout value is within it's range;
399 	   if not reset to the default */
400 	if (timeout < 1 || timeout >= 18000) {
401 		timeout = WATCHDOG_TIMEOUT;
402 		printk(KERN_INFO PFX
403 		     "timeout value must be 0 < timeout < 18000, using %d\n",
404 							timeout);
405 	}
406 
407 	/* Calculate the watchdog's timeout */
408 	ali_settimer(timeout);
409 
410 	ret = register_reboot_notifier(&ali_notifier);
411 	if (ret != 0) {
412 		printk(KERN_ERR PFX
413 			"cannot register reboot notifier (err=%d)\n", ret);
414 		goto out;
415 	}
416 
417 	ret = misc_register(&ali_miscdev);
418 	if (ret != 0) {
419 		printk(KERN_ERR PFX
420 			"cannot register miscdev on minor=%d (err=%d)\n",
421 						WATCHDOG_MINOR, ret);
422 		goto unreg_reboot;
423 	}
424 
425 	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
426 		timeout, nowayout);
427 
428 out:
429 	return ret;
430 unreg_reboot:
431 	unregister_reboot_notifier(&ali_notifier);
432 	goto out;
433 }
434 
435 /*
436  *	watchdog_exit	-	module de-initialiser
437  *
438  *	Called while unloading a successfully installed watchdog module.
439  */
440 
441 static void __exit watchdog_exit(void)
442 {
443 	/* Stop the timer before we leave */
444 	ali_stop();
445 
446 	/* Deregister */
447 	misc_deregister(&ali_miscdev);
448 	unregister_reboot_notifier(&ali_notifier);
449 	pci_dev_put(ali_pci);
450 }
451 
452 module_init(watchdog_init);
453 module_exit(watchdog_exit);
454 
455 MODULE_AUTHOR("Alan Cox");
456 MODULE_DESCRIPTION("ALi M1535 PMU Watchdog Timer driver");
457 MODULE_LICENSE("GPL");
458 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
459