xref: /openbmc/linux/drivers/w1/w1_netlink.h (revision 09c434b8)
1 /*
2  * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net>
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License as published by
6  * the Free Software Foundation; either version 2 of the License, or
7  * (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  */
14 
15 #ifndef __W1_NETLINK_H
16 #define __W1_NETLINK_H
17 
18 #include <asm/types.h>
19 #include <linux/connector.h>
20 
21 #include "w1_internal.h"
22 
23 /**
24  * enum w1_cn_msg_flags - bitfield flags for struct cn_msg.flags
25  *
26  * @W1_CN_BUNDLE: Request bundling replies into fewer messagse.  Be prepared
27  * to handle multiple struct cn_msg, struct w1_netlink_msg, and
28  * struct w1_netlink_cmd in one packet.
29  */
30 enum w1_cn_msg_flags {
31 	W1_CN_BUNDLE = 1,
32 };
33 
34 /**
35  * enum w1_netlink_message_types - message type
36  *
37  * @W1_SLAVE_ADD: notification that a slave device was added
38  * @W1_SLAVE_REMOVE: notification that a slave device was removed
39  * @W1_MASTER_ADD: notification that a new bus master was added
40  * @W1_MASTER_REMOVE: notification that a bus masterwas removed
41  * @W1_MASTER_CMD: initiate operations on a specific master
42  * @W1_SLAVE_CMD: sends reset, selects the slave, then does a read/write/touch
43  * operation
44  * @W1_LIST_MASTERS: used to determine the bus master identifiers
45  */
46 enum w1_netlink_message_types {
47 	W1_SLAVE_ADD = 0,
48 	W1_SLAVE_REMOVE,
49 	W1_MASTER_ADD,
50 	W1_MASTER_REMOVE,
51 	W1_MASTER_CMD,
52 	W1_SLAVE_CMD,
53 	W1_LIST_MASTERS,
54 };
55 
56 /**
57  * struct w1_netlink_msg - holds w1 message type, id, and result
58  *
59  * @type: one of enum w1_netlink_message_types
60  * @status: kernel feedback for success 0 or errno failure value
61  * @len: length of data following w1_netlink_msg
62  * @id: union holding bus master id (msg.id) and slave device id (id[8]).
63  * @id.id: Slave ID (8 bytes)
64  * @id.mst: bus master identification
65  * @id.mst.id: bus master ID
66  * @id.mst.res: bus master reserved
67  * @data: start address of any following data
68  *
69  * The base message structure for w1 messages over netlink.
70  * The netlink connector data sequence is, struct nlmsghdr, struct cn_msg,
71  * then one or more struct w1_netlink_msg (each with optional data).
72  */
73 struct w1_netlink_msg
74 {
75 	__u8				type;
76 	__u8				status;
77 	__u16				len;
78 	union {
79 		__u8			id[8];
80 		struct w1_mst {
81 			__u32		id;
82 			__u32		res;
83 		} mst;
84 	} id;
85 	__u8				data[0];
86 };
87 
88 /**
89  * enum w1_commands - commands available for master or slave operations
90  *
91  * @W1_CMD_READ: read len bytes
92  * @W1_CMD_WRITE: write len bytes
93  * @W1_CMD_SEARCH: initiate a standard search, returns only the slave
94  * devices found during that search
95  * @W1_CMD_ALARM_SEARCH: search for devices that are currently alarming
96  * @W1_CMD_TOUCH: Touches a series of bytes.
97  * @W1_CMD_RESET: sends a bus reset on the given master
98  * @W1_CMD_SLAVE_ADD: adds a slave to the given master,
99  * 8 byte slave id at data[0]
100  * @W1_CMD_SLAVE_REMOVE: removes a slave to the given master,
101  * 8 byte slave id at data[0]
102  * @W1_CMD_LIST_SLAVES: list of slaves registered on this master
103  * @W1_CMD_MAX: number of available commands
104  */
105 enum w1_commands {
106 	W1_CMD_READ = 0,
107 	W1_CMD_WRITE,
108 	W1_CMD_SEARCH,
109 	W1_CMD_ALARM_SEARCH,
110 	W1_CMD_TOUCH,
111 	W1_CMD_RESET,
112 	W1_CMD_SLAVE_ADD,
113 	W1_CMD_SLAVE_REMOVE,
114 	W1_CMD_LIST_SLAVES,
115 	W1_CMD_MAX
116 };
117 
118 /**
119  * struct w1_netlink_cmd - holds the command and data
120  *
121  * @cmd: one of enum w1_commands
122  * @res: reserved
123  * @len: length of data following w1_netlink_cmd
124  * @data: start address of any following data
125  *
126  * One or more struct w1_netlink_cmd is placed starting at w1_netlink_msg.data
127  * each with optional data.
128  */
129 struct w1_netlink_cmd
130 {
131 	__u8				cmd;
132 	__u8				res;
133 	__u16				len;
134 	__u8				data[0];
135 };
136 
137 #ifdef __KERNEL__
138 
139 void w1_netlink_send(struct w1_master *, struct w1_netlink_msg *);
140 int w1_init_netlink(void);
141 void w1_fini_netlink(void);
142 
143 #endif /* __KERNEL__ */
144 #endif /* __W1_NETLINK_H */
145