1 /* 2 * w1_io.c 3 * 4 * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> 5 * 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 20 */ 21 22 #include <asm/io.h> 23 24 #include <linux/delay.h> 25 #include <linux/moduleparam.h> 26 #include <linux/module.h> 27 28 #include "w1.h" 29 #include "w1_log.h" 30 31 static int w1_delay_parm = 1; 32 module_param_named(delay_coef, w1_delay_parm, int, 0); 33 34 static int w1_disable_irqs = 0; 35 module_param_named(disable_irqs, w1_disable_irqs, int, 0); 36 37 static u8 w1_crc8_table[] = { 38 0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65, 39 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220, 40 35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98, 41 190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255, 42 70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7, 43 219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154, 44 101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36, 45 248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185, 46 140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205, 47 17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80, 48 175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238, 49 50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115, 50 202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139, 51 87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22, 52 233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168, 53 116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53 54 }; 55 56 static void w1_delay(unsigned long tm) 57 { 58 udelay(tm * w1_delay_parm); 59 } 60 61 static void w1_write_bit(struct w1_master *dev, int bit); 62 static u8 w1_read_bit(struct w1_master *dev); 63 64 /** 65 * w1_touch_bit() - Generates a write-0 or write-1 cycle and samples the level. 66 * @dev: the master device 67 * @bit: 0 - write a 0, 1 - write a 0 read the level 68 */ 69 static u8 w1_touch_bit(struct w1_master *dev, int bit) 70 { 71 if (dev->bus_master->touch_bit) 72 return dev->bus_master->touch_bit(dev->bus_master->data, bit); 73 else if (bit) 74 return w1_read_bit(dev); 75 else { 76 w1_write_bit(dev, 0); 77 return 0; 78 } 79 } 80 81 /** 82 * w1_write_bit() - Generates a write-0 or write-1 cycle. 83 * @dev: the master device 84 * @bit: bit to write 85 * 86 * Only call if dev->bus_master->touch_bit is NULL 87 */ 88 static void w1_write_bit(struct w1_master *dev, int bit) 89 { 90 unsigned long flags = 0; 91 92 if(w1_disable_irqs) local_irq_save(flags); 93 94 if (bit) { 95 dev->bus_master->write_bit(dev->bus_master->data, 0); 96 w1_delay(6); 97 dev->bus_master->write_bit(dev->bus_master->data, 1); 98 w1_delay(64); 99 } else { 100 dev->bus_master->write_bit(dev->bus_master->data, 0); 101 w1_delay(60); 102 dev->bus_master->write_bit(dev->bus_master->data, 1); 103 w1_delay(10); 104 } 105 106 if(w1_disable_irqs) local_irq_restore(flags); 107 } 108 109 /** 110 * w1_pre_write() - pre-write operations 111 * @dev: the master device 112 * 113 * Pre-write operation, currently only supporting strong pullups. 114 * Program the hardware for a strong pullup, if one has been requested and 115 * the hardware supports it. 116 */ 117 static void w1_pre_write(struct w1_master *dev) 118 { 119 if (dev->pullup_duration && 120 dev->enable_pullup && dev->bus_master->set_pullup) { 121 dev->bus_master->set_pullup(dev->bus_master->data, 122 dev->pullup_duration); 123 } 124 } 125 126 /** 127 * w1_post_write() - post-write options 128 * @dev: the master device 129 * 130 * Post-write operation, currently only supporting strong pullups. 131 * If a strong pullup was requested, clear it if the hardware supports 132 * them, or execute the delay otherwise, in either case clear the request. 133 */ 134 static void w1_post_write(struct w1_master *dev) 135 { 136 if (dev->pullup_duration) { 137 if (dev->enable_pullup && dev->bus_master->set_pullup) 138 dev->bus_master->set_pullup(dev->bus_master->data, 0); 139 else 140 msleep(dev->pullup_duration); 141 dev->pullup_duration = 0; 142 } 143 } 144 145 /** 146 * w1_write_8() - Writes 8 bits. 147 * @dev: the master device 148 * @byte: the byte to write 149 */ 150 void w1_write_8(struct w1_master *dev, u8 byte) 151 { 152 int i; 153 154 if (dev->bus_master->write_byte) { 155 w1_pre_write(dev); 156 dev->bus_master->write_byte(dev->bus_master->data, byte); 157 } 158 else 159 for (i = 0; i < 8; ++i) { 160 if (i == 7) 161 w1_pre_write(dev); 162 w1_touch_bit(dev, (byte >> i) & 0x1); 163 } 164 w1_post_write(dev); 165 } 166 EXPORT_SYMBOL_GPL(w1_write_8); 167 168 169 /** 170 * w1_read_bit() - Generates a write-1 cycle and samples the level. 171 * @dev: the master device 172 * 173 * Only call if dev->bus_master->touch_bit is NULL 174 */ 175 static u8 w1_read_bit(struct w1_master *dev) 176 { 177 int result; 178 unsigned long flags = 0; 179 180 /* sample timing is critical here */ 181 local_irq_save(flags); 182 dev->bus_master->write_bit(dev->bus_master->data, 0); 183 w1_delay(6); 184 dev->bus_master->write_bit(dev->bus_master->data, 1); 185 w1_delay(9); 186 187 result = dev->bus_master->read_bit(dev->bus_master->data); 188 local_irq_restore(flags); 189 190 w1_delay(55); 191 192 return result & 0x1; 193 } 194 195 /** 196 * w1_triplet() - * Does a triplet - used for searching ROM addresses. 197 * @dev: the master device 198 * @bdir: the bit to write if both id_bit and comp_bit are 0 199 * 200 * Return bits: 201 * bit 0 = id_bit 202 * bit 1 = comp_bit 203 * bit 2 = dir_taken 204 * If both bits 0 & 1 are set, the search should be restarted. 205 * 206 * Return: bit fields - see above 207 */ 208 u8 w1_triplet(struct w1_master *dev, int bdir) 209 { 210 if (dev->bus_master->triplet) 211 return dev->bus_master->triplet(dev->bus_master->data, bdir); 212 else { 213 u8 id_bit = w1_touch_bit(dev, 1); 214 u8 comp_bit = w1_touch_bit(dev, 1); 215 u8 retval; 216 217 if (id_bit && comp_bit) 218 return 0x03; /* error */ 219 220 if (!id_bit && !comp_bit) { 221 /* Both bits are valid, take the direction given */ 222 retval = bdir ? 0x04 : 0; 223 } else { 224 /* Only one bit is valid, take that direction */ 225 bdir = id_bit; 226 retval = id_bit ? 0x05 : 0x02; 227 } 228 229 if (dev->bus_master->touch_bit) 230 w1_touch_bit(dev, bdir); 231 else 232 w1_write_bit(dev, bdir); 233 return retval; 234 } 235 } 236 237 /** 238 * w1_read_8() - Reads 8 bits. 239 * @dev: the master device 240 * 241 * Return: the byte read 242 */ 243 u8 w1_read_8(struct w1_master *dev) 244 { 245 int i; 246 u8 res = 0; 247 248 if (dev->bus_master->read_byte) 249 res = dev->bus_master->read_byte(dev->bus_master->data); 250 else 251 for (i = 0; i < 8; ++i) 252 res |= (w1_touch_bit(dev,1) << i); 253 254 return res; 255 } 256 EXPORT_SYMBOL_GPL(w1_read_8); 257 258 /** 259 * w1_write_block() - Writes a series of bytes. 260 * @dev: the master device 261 * @buf: pointer to the data to write 262 * @len: the number of bytes to write 263 */ 264 void w1_write_block(struct w1_master *dev, const u8 *buf, int len) 265 { 266 int i; 267 268 if (dev->bus_master->write_block) { 269 w1_pre_write(dev); 270 dev->bus_master->write_block(dev->bus_master->data, buf, len); 271 } 272 else 273 for (i = 0; i < len; ++i) 274 w1_write_8(dev, buf[i]); /* calls w1_pre_write */ 275 w1_post_write(dev); 276 } 277 EXPORT_SYMBOL_GPL(w1_write_block); 278 279 /** 280 * w1_touch_block() - Touches a series of bytes. 281 * @dev: the master device 282 * @buf: pointer to the data to write 283 * @len: the number of bytes to write 284 */ 285 void w1_touch_block(struct w1_master *dev, u8 *buf, int len) 286 { 287 int i, j; 288 u8 tmp; 289 290 for (i = 0; i < len; ++i) { 291 tmp = 0; 292 for (j = 0; j < 8; ++j) { 293 if (j == 7) 294 w1_pre_write(dev); 295 tmp |= w1_touch_bit(dev, (buf[i] >> j) & 0x1) << j; 296 } 297 298 buf[i] = tmp; 299 } 300 } 301 EXPORT_SYMBOL_GPL(w1_touch_block); 302 303 /** 304 * w1_read_block() - Reads a series of bytes. 305 * @dev: the master device 306 * @buf: pointer to the buffer to fill 307 * @len: the number of bytes to read 308 * Return: the number of bytes read 309 */ 310 u8 w1_read_block(struct w1_master *dev, u8 *buf, int len) 311 { 312 int i; 313 u8 ret; 314 315 if (dev->bus_master->read_block) 316 ret = dev->bus_master->read_block(dev->bus_master->data, buf, len); 317 else { 318 for (i = 0; i < len; ++i) 319 buf[i] = w1_read_8(dev); 320 ret = len; 321 } 322 323 return ret; 324 } 325 EXPORT_SYMBOL_GPL(w1_read_block); 326 327 /** 328 * w1_reset_bus() - Issues a reset bus sequence. 329 * @dev: the master device 330 * Return: 0=Device present, 1=No device present or error 331 */ 332 int w1_reset_bus(struct w1_master *dev) 333 { 334 int result; 335 unsigned long flags = 0; 336 337 if(w1_disable_irqs) local_irq_save(flags); 338 339 if (dev->bus_master->reset_bus) 340 result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1; 341 else { 342 dev->bus_master->write_bit(dev->bus_master->data, 0); 343 /* minimum 480, max ? us 344 * be nice and sleep, except 18b20 spec lists 960us maximum, 345 * so until we can sleep with microsecond accuracy, spin. 346 * Feel free to come up with some other way to give up the 347 * cpu for such a short amount of time AND get it back in 348 * the maximum amount of time. 349 */ 350 w1_delay(500); 351 dev->bus_master->write_bit(dev->bus_master->data, 1); 352 w1_delay(70); 353 354 result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1; 355 /* minmum 70 (above) + 430 = 500 us 356 * There aren't any timing requirements between a reset and 357 * the following transactions. Sleeping is safe here. 358 */ 359 /* w1_delay(430); min required time */ 360 msleep(1); 361 } 362 363 if(w1_disable_irqs) local_irq_restore(flags); 364 365 return result; 366 } 367 EXPORT_SYMBOL_GPL(w1_reset_bus); 368 369 u8 w1_calc_crc8(u8 * data, int len) 370 { 371 u8 crc = 0; 372 373 while (len--) 374 crc = w1_crc8_table[crc ^ *data++]; 375 376 return crc; 377 } 378 EXPORT_SYMBOL_GPL(w1_calc_crc8); 379 380 void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb) 381 { 382 dev->attempts++; 383 if (dev->bus_master->search) 384 dev->bus_master->search(dev->bus_master->data, dev, 385 search_type, cb); 386 else 387 w1_search(dev, search_type, cb); 388 } 389 390 /** 391 * w1_reset_select_slave() - reset and select a slave 392 * @sl: the slave to select 393 * 394 * Resets the bus and then selects the slave by sending either a skip rom 395 * or a rom match. A skip rom is issued if there is only one device 396 * registered on the bus. 397 * The w1 master lock must be held. 398 * 399 * Return: 0=success, anything else=error 400 */ 401 int w1_reset_select_slave(struct w1_slave *sl) 402 { 403 if (w1_reset_bus(sl->master)) 404 return -1; 405 406 if (sl->master->slave_count == 1) 407 w1_write_8(sl->master, W1_SKIP_ROM); 408 else { 409 u8 match[9] = {W1_MATCH_ROM, }; 410 u64 rn = le64_to_cpu(*((u64*)&sl->reg_num)); 411 412 memcpy(&match[1], &rn, 8); 413 w1_write_block(sl->master, match, 9); 414 } 415 return 0; 416 } 417 EXPORT_SYMBOL_GPL(w1_reset_select_slave); 418 419 /** 420 * w1_reset_resume_command() - resume instead of another match ROM 421 * @dev: the master device 422 * 423 * When the workflow with a slave amongst many requires several 424 * successive commands a reset between each, this function is similar 425 * to doing a reset then a match ROM for the last matched ROM. The 426 * advantage being that the matched ROM step is skipped in favor of the 427 * resume command. The slave must support the command of course. 428 * 429 * If the bus has only one slave, traditionnaly the match ROM is skipped 430 * and a "SKIP ROM" is done for efficiency. On multi-slave busses, this 431 * doesn't work of course, but the resume command is the next best thing. 432 * 433 * The w1 master lock must be held. 434 */ 435 int w1_reset_resume_command(struct w1_master *dev) 436 { 437 if (w1_reset_bus(dev)) 438 return -1; 439 440 /* This will make only the last matched slave perform a skip ROM. */ 441 w1_write_8(dev, W1_RESUME_CMD); 442 return 0; 443 } 444 EXPORT_SYMBOL_GPL(w1_reset_resume_command); 445 446 /** 447 * w1_next_pullup() - register for a strong pullup 448 * @dev: the master device 449 * @delay: time in milliseconds 450 * 451 * Put out a strong pull-up of the specified duration after the next write 452 * operation. Not all hardware supports strong pullups. Hardware that 453 * doesn't support strong pullups will sleep for the given time after the 454 * write operation without a strong pullup. This is a one shot request for 455 * the next write, specifying zero will clear a previous request. 456 * The w1 master lock must be held. 457 * 458 * Return: 0=success, anything else=error 459 */ 460 void w1_next_pullup(struct w1_master *dev, int delay) 461 { 462 dev->pullup_duration = delay; 463 } 464 EXPORT_SYMBOL_GPL(w1_next_pullup); 465