1# 2# 1-wire slaves configuration 3# 4 5menu "1-wire Slaves" 6 7config W1_SLAVE_THERM 8 tristate "Thermal family implementation" 9 help 10 Say Y here if you want to connect 1-wire thermal sensors to your 11 wire. 12 13config W1_SLAVE_SMEM 14 tristate "Simple 64bit memory family implementation" 15 help 16 Say Y here if you want to connect 1-wire 17 simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire. 18 19config W1_SLAVE_DS2405 20 tristate "DS2405 Addressable Switch" 21 help 22 Say Y or M here if you want to use a DS2405 1-wire 23 single-channel addressable switch. 24 This device can also work as a single-channel 25 binary remote sensor. 26 27config W1_SLAVE_DS2408 28 tristate "8-Channel Addressable Switch (IO Expander) 0x29 family support (DS2408)" 29 help 30 Say Y here if you want to use a 1-wire 31 DS2408 8-Channel Addressable Switch device support 32 33config W1_SLAVE_DS2408_READBACK 34 bool "Read-back values written to DS2408's output register" 35 depends on W1_SLAVE_DS2408 36 default y 37 help 38 Enabling this will cause the driver to read back the values written 39 to the chip's output register in order to detect errors. 40 41 This is slower but useful when debugging chips and/or busses. 42 43config W1_SLAVE_DS2413 44 tristate "Dual Channel Addressable Switch 0x3a family support (DS2413)" 45 help 46 Say Y here if you want to use a 1-wire 47 DS2413 Dual Channel Addressable Switch device support 48 49config W1_SLAVE_DS2406 50 tristate "Dual Channel Addressable Switch 0x12 family support (DS2406)" 51 select CRC16 52 help 53 Say Y or M here if you want to use a 1-wire 54 DS2406 Dual Channel Addressable Switch. EPROM read/write 55 support for these devices is not implemented. 56 57config W1_SLAVE_DS2423 58 tristate "Counter 1-wire device (DS2423)" 59 select CRC16 60 help 61 If you enable this you can read the counter values available 62 in the DS2423 chipset from the w1_slave file under the 63 sys file system. 64 65 Say Y here if you want to use a 1-wire 66 counter family device (DS2423). 67 68config W1_SLAVE_DS2805 69 tristate "112-byte EEPROM support (DS28E05)" 70 help 71 Say Y here if you want to use a 1-wire 72 is a 112-byte user-programmable EEPROM is 73 organized as 7 pages of 16 bytes each with 64bit 74 unique number. Requires OverDrive Speed to talk to. 75 76config W1_SLAVE_DS2431 77 tristate "1kb EEPROM family support (DS2431)" 78 help 79 Say Y here if you want to use a 1-wire 80 1kb EEPROM family device (DS2431) 81 82config W1_SLAVE_DS2433 83 tristate "4kb EEPROM family support (DS2433)" 84 help 85 Say Y here if you want to use a 1-wire 86 4kb EEPROM family device (DS2433). 87 88config W1_SLAVE_DS2433_CRC 89 bool "Protect DS2433 data with a CRC16" 90 depends on W1_SLAVE_DS2433 91 select CRC16 92 help 93 Say Y here to protect DS2433 data with a CRC16. 94 Each block has 30 bytes of data and a two byte CRC16. 95 Full block writes are only allowed if the CRC is valid. 96 97config W1_SLAVE_DS2438 98 tristate "DS2438 Smart Battery Monitor 0x26 family support" 99 help 100 Say Y here if you want to use a 1-wire 101 DS2438 Smart Battery Monitor device support 102 103config W1_SLAVE_DS2760 104 tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)" 105 help 106 If you enable this you will have the DS2760 battery monitor 107 chip support. 108 109 The battery monitor chip is used in many batteries/devices 110 as the one who is responsible for charging/discharging/monitoring 111 Li+ batteries. 112 113 If you are unsure, say N. 114 115config W1_SLAVE_DS2780 116 tristate "Dallas 2780 battery monitor chip" 117 help 118 If you enable this you will have the DS2780 battery monitor 119 chip support. 120 121 The battery monitor chip is used in many batteries/devices 122 as the one who is responsible for charging/discharging/monitoring 123 Li+ batteries. 124 125 If you are unsure, say N. 126 127config W1_SLAVE_DS2781 128 tristate "Dallas 2781 battery monitor chip" 129 help 130 If you enable this you will have the DS2781 battery monitor 131 chip support. 132 133 The battery monitor chip is used in many batteries/devices 134 as the one who is responsible for charging/discharging/monitoring 135 Li+ batteries. 136 137 If you are unsure, say N. 138 139config W1_SLAVE_DS28E04 140 tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)" 141 select CRC16 142 help 143 If you enable this you will have the DS28E04-100 144 chip support. 145 146 Say Y here if you want to use a 1-wire 147 4kb EEPROM with PIO family device (DS28E04). 148 149 If you are unsure, say N. 150 151config W1_SLAVE_DS28E17 152 tristate "1-wire-to-I2C master bridge (DS28E17)" 153 select CRC16 154 depends on I2C 155 help 156 Say Y here if you want to use the DS28E17 1-wire-to-I2C master bridge. 157 For each DS28E17 detected, a new I2C adapter is created within the 158 kernel. I2C devices on that bus can be configured to be used by the 159 kernel and userspace tools as on any other "native" I2C bus. 160 161 This driver is also available as a module. If so, the module 162 will be called w1_ds28e17. 163 164 If you are unsure, say N. 165 166endmenu 167