xref: /openbmc/linux/drivers/w1/slaves/Kconfig (revision dd6478d6)
1bd529cfbSEvgeniy Polyakov#
2bd529cfbSEvgeniy Polyakov# 1-wire slaves configuration
3bd529cfbSEvgeniy Polyakov#
4bd529cfbSEvgeniy Polyakov
5bd529cfbSEvgeniy Polyakovmenu "1-wire Slaves"
6bd529cfbSEvgeniy Polyakov
7bd529cfbSEvgeniy Polyakovconfig W1_SLAVE_THERM
8bd529cfbSEvgeniy Polyakov	tristate "Thermal family implementation"
9bd529cfbSEvgeniy Polyakov	help
1089040b21SEvgeniy Polyakov	  Say Y here if you want to connect 1-wire thermal sensors to your
11bd529cfbSEvgeniy Polyakov	  wire.
12bd529cfbSEvgeniy Polyakov
13bd529cfbSEvgeniy Polyakovconfig W1_SLAVE_SMEM
14bd529cfbSEvgeniy Polyakov	tristate "Simple 64bit memory family implementation"
15bd529cfbSEvgeniy Polyakov	help
16bd529cfbSEvgeniy Polyakov	  Say Y here if you want to connect 1-wire
1789040b21SEvgeniy Polyakov	  simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
18bd529cfbSEvgeniy Polyakov
19*dd6478d6SMaciej S. Szmigieroconfig W1_SLAVE_DS2405
20*dd6478d6SMaciej S. Szmigiero	tristate "DS2405 Addressable Switch"
21*dd6478d6SMaciej S. Szmigiero	help
22*dd6478d6SMaciej S. Szmigiero	  Say Y or M here if you want to use a DS2405 1-wire
23*dd6478d6SMaciej S. Szmigiero	  single-channel addressable switch.
24*dd6478d6SMaciej S. Szmigiero	  This device can also work as a single-channel
25*dd6478d6SMaciej S. Szmigiero	  binary remote sensor.
26*dd6478d6SMaciej S. Szmigiero
2789610274SJean-François Dagenaisconfig W1_SLAVE_DS2408
2889610274SJean-François Dagenais	tristate "8-Channel Addressable Switch (IO Expander) 0x29 family support (DS2408)"
2989610274SJean-François Dagenais	help
3089610274SJean-François Dagenais	  Say Y here if you want to use a 1-wire
3189610274SJean-François Dagenais	  DS2408 8-Channel Addressable Switch device support
3289610274SJean-François Dagenais
33aceca285SJean-Francois Dagenaisconfig W1_SLAVE_DS2408_READBACK
34aceca285SJean-Francois Dagenais	bool "Read-back values written to DS2408's output register"
35aceca285SJean-Francois Dagenais	depends on W1_SLAVE_DS2408
36aceca285SJean-Francois Dagenais	default y
37aceca285SJean-Francois Dagenais	help
38aceca285SJean-Francois Dagenais	  Enabling this will cause the driver to read back the values written
39aceca285SJean-Francois Dagenais	  to the chip's output register in order to detect errors.
40aceca285SJean-Francois Dagenais
41aceca285SJean-Francois Dagenais	  This is slower but useful when debugging chips and/or busses.
42aceca285SJean-Francois Dagenais
4331b4ca3eSMariusz Bialonczykconfig W1_SLAVE_DS2413
4431b4ca3eSMariusz Bialonczyk	tristate "Dual Channel Addressable Switch 0x3a family support (DS2413)"
4531b4ca3eSMariusz Bialonczyk	help
4631b4ca3eSMariusz Bialonczyk	  Say Y here if you want to use a 1-wire
4731b4ca3eSMariusz Bialonczyk	  DS2413 Dual Channel Addressable Switch device support
4831b4ca3eSMariusz Bialonczyk
4994859308SScott Alfterconfig W1_SLAVE_DS2406
5094859308SScott Alfter	tristate "Dual Channel Addressable Switch 0x12 family support (DS2406)"
516b5fa776SArnd Bergmann	select CRC16
5294859308SScott Alfter	help
5394859308SScott Alfter	  Say Y or M here if you want to use a 1-wire
5494859308SScott Alfter	  DS2406 Dual Channel Addressable Switch.  EPROM read/write
5594859308SScott Alfter	  support for these devices is not implemented.
5694859308SScott Alfter
5717fecb55SMika Laitioconfig W1_SLAVE_DS2423
5817fecb55SMika Laitio	tristate "Counter 1-wire device (DS2423)"
5917fecb55SMika Laitio	select CRC16
6017fecb55SMika Laitio	help
6117fecb55SMika Laitio	  If you enable this you can read the counter values available
6217fecb55SMika Laitio	  in the DS2423 chipset from the w1_slave file under the
6317fecb55SMika Laitio	  sys file system.
6417fecb55SMika Laitio
6517fecb55SMika Laitio	  Say Y here if you want to use a 1-wire
6617fecb55SMika Laitio	  counter family device (DS2423).
6717fecb55SMika Laitio
688ca2f156SHerton Ronaldo Krzesinskiconfig W1_SLAVE_DS2431
698ca2f156SHerton Ronaldo Krzesinski	tristate "1kb EEPROM family support (DS2431)"
708ca2f156SHerton Ronaldo Krzesinski	help
718ca2f156SHerton Ronaldo Krzesinski	  Say Y here if you want to use a 1-wire
728ca2f156SHerton Ronaldo Krzesinski	  1kb EEPROM family device (DS2431)
738ca2f156SHerton Ronaldo Krzesinski
74bd529cfbSEvgeniy Polyakovconfig W1_SLAVE_DS2433
75bd529cfbSEvgeniy Polyakov	tristate "4kb EEPROM family support (DS2433)"
76bd529cfbSEvgeniy Polyakov	help
77bd529cfbSEvgeniy Polyakov	  Say Y here if you want to use a 1-wire
78bd529cfbSEvgeniy Polyakov	  4kb EEPROM family device (DS2433).
79bd529cfbSEvgeniy Polyakov
80bd529cfbSEvgeniy Polyakovconfig W1_SLAVE_DS2433_CRC
81bd529cfbSEvgeniy Polyakov	bool "Protect DS2433 data with a CRC16"
82f621e1c7SJean-Luc Leger	depends on W1_SLAVE_DS2433
83bd529cfbSEvgeniy Polyakov	select CRC16
84bd529cfbSEvgeniy Polyakov	help
85bd529cfbSEvgeniy Polyakov	  Say Y here to protect DS2433 data with a CRC16.
86bd529cfbSEvgeniy Polyakov	  Each block has 30 bytes of data and a two byte CRC16.
87bd529cfbSEvgeniy Polyakov	  Full block writes are only allowed if the CRC is valid.
88bd529cfbSEvgeniy Polyakov
89d7ce6d1dSAnton Vorontsovconfig W1_SLAVE_DS2760
90d7ce6d1dSAnton Vorontsov	tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
91d7ce6d1dSAnton Vorontsov	help
92d7ce6d1dSAnton Vorontsov	  If you enable this you will have the DS2760 battery monitor
93d7ce6d1dSAnton Vorontsov	  chip support.
94d7ce6d1dSAnton Vorontsov
95d7ce6d1dSAnton Vorontsov	  The battery monitor chip is used in many batteries/devices
96d7ce6d1dSAnton Vorontsov	  as the one who is responsible for charging/discharging/monitoring
97d7ce6d1dSAnton Vorontsov	  Li+ batteries.
98d7ce6d1dSAnton Vorontsov
99d7ce6d1dSAnton Vorontsov	  If you are unsure, say N.
100d7ce6d1dSAnton Vorontsov
101275ac746SClifton Barnesconfig W1_SLAVE_DS2780
102275ac746SClifton Barnes	tristate "Dallas 2780 battery monitor chip"
103275ac746SClifton Barnes	help
104275ac746SClifton Barnes	  If you enable this you will have the DS2780 battery monitor
105275ac746SClifton Barnes	  chip support.
106275ac746SClifton Barnes
107275ac746SClifton Barnes	  The battery monitor chip is used in many batteries/devices
108275ac746SClifton Barnes	  as the one who is responsible for charging/discharging/monitoring
109275ac746SClifton Barnes	  Li+ batteries.
110275ac746SClifton Barnes
111275ac746SClifton Barnes	  If you are unsure, say N.
112275ac746SClifton Barnes
113fef37e9aSRenata Sayakhovaconfig W1_SLAVE_DS2781
114fef37e9aSRenata Sayakhova	tristate "Dallas 2781 battery monitor chip"
115fef37e9aSRenata Sayakhova	help
116fef37e9aSRenata Sayakhova	  If you enable this you will have the DS2781 battery monitor
117fef37e9aSRenata Sayakhova	  chip support.
118fef37e9aSRenata Sayakhova
119fef37e9aSRenata Sayakhova	  The battery monitor chip is used in many batteries/devices
120fef37e9aSRenata Sayakhova	  as the one who is responsible for charging/discharging/monitoring
121fef37e9aSRenata Sayakhova	  Li+ batteries.
122fef37e9aSRenata Sayakhova
123fef37e9aSRenata Sayakhova	  If you are unsure, say N.
124fef37e9aSRenata Sayakhova
125fbf7f7b4SMarkus Frankeconfig W1_SLAVE_DS28E04
126fbf7f7b4SMarkus Franke	tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)"
127fbf7f7b4SMarkus Franke	select CRC16
128fbf7f7b4SMarkus Franke	help
129fbf7f7b4SMarkus Franke	  If you enable this you will have the DS28E04-100
130fbf7f7b4SMarkus Franke	  chip support.
131fbf7f7b4SMarkus Franke
132fbf7f7b4SMarkus Franke	  Say Y here if you want to use a 1-wire
133fbf7f7b4SMarkus Franke	  4kb EEPROM with PIO family device (DS28E04).
134fbf7f7b4SMarkus Franke
135fbf7f7b4SMarkus Franke	  If you are unsure, say N.
136fbf7f7b4SMarkus Franke
137cfbc6190SMadhusudhan Chikkatureconfig W1_SLAVE_BQ27000
138cfbc6190SMadhusudhan Chikkature	tristate "BQ27000 slave support"
139cfbc6190SMadhusudhan Chikkature	help
140cfbc6190SMadhusudhan Chikkature	  Say Y here if you want to use a hdq
141cfbc6190SMadhusudhan Chikkature	  bq27000 slave support.
142cfbc6190SMadhusudhan Chikkature
143bd529cfbSEvgeniy Polyakovendmenu
144