1 /* 2 * drivers/w1/masters/omap_hdq.c 3 * 4 * Copyright (C) 2007,2012 Texas Instruments, Inc. 5 * 6 * This file is licensed under the terms of the GNU General Public License 7 * version 2. This program is licensed "as is" without any warranty of any 8 * kind, whether express or implied. 9 * 10 */ 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/platform_device.h> 14 #include <linux/interrupt.h> 15 #include <linux/slab.h> 16 #include <linux/err.h> 17 #include <linux/io.h> 18 #include <linux/sched.h> 19 #include <linux/pm_runtime.h> 20 #include <linux/of.h> 21 22 #include <linux/w1.h> 23 24 #define MOD_NAME "OMAP_HDQ:" 25 26 #define OMAP_HDQ_REVISION 0x00 27 #define OMAP_HDQ_TX_DATA 0x04 28 #define OMAP_HDQ_RX_DATA 0x08 29 #define OMAP_HDQ_CTRL_STATUS 0x0c 30 #define OMAP_HDQ_CTRL_STATUS_SINGLE BIT(7) 31 #define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK BIT(6) 32 #define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE BIT(5) 33 #define OMAP_HDQ_CTRL_STATUS_GO BIT(4) 34 #define OMAP_HDQ_CTRL_STATUS_PRESENCE BIT(3) 35 #define OMAP_HDQ_CTRL_STATUS_INITIALIZATION BIT(2) 36 #define OMAP_HDQ_CTRL_STATUS_DIR BIT(1) 37 #define OMAP_HDQ_INT_STATUS 0x10 38 #define OMAP_HDQ_INT_STATUS_TXCOMPLETE BIT(2) 39 #define OMAP_HDQ_INT_STATUS_RXCOMPLETE BIT(1) 40 #define OMAP_HDQ_INT_STATUS_TIMEOUT BIT(0) 41 #define OMAP_HDQ_SYSCONFIG 0x14 42 #define OMAP_HDQ_SYSCONFIG_SOFTRESET BIT(1) 43 #define OMAP_HDQ_SYSCONFIG_AUTOIDLE BIT(0) 44 #define OMAP_HDQ_SYSCONFIG_NOIDLE 0x0 45 #define OMAP_HDQ_SYSSTATUS 0x18 46 #define OMAP_HDQ_SYSSTATUS_RESETDONE BIT(0) 47 48 #define OMAP_HDQ_FLAG_CLEAR 0 49 #define OMAP_HDQ_FLAG_SET 1 50 #define OMAP_HDQ_TIMEOUT (HZ/5) 51 52 #define OMAP_HDQ_MAX_USER 4 53 54 static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue); 55 56 static int w1_id; 57 module_param(w1_id, int, S_IRUSR); 58 MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection in HDQ mode"); 59 60 struct hdq_data { 61 struct device *dev; 62 void __iomem *hdq_base; 63 /* lock status update */ 64 struct mutex hdq_mutex; 65 int hdq_usecount; 66 u8 hdq_irqstatus; 67 /* device lock */ 68 spinlock_t hdq_spinlock; 69 /* 70 * Used to control the call to omap_hdq_get and omap_hdq_put. 71 * HDQ Protocol: Write the CMD|REG_address first, followed by 72 * the data wrire or read. 73 */ 74 int init_trans; 75 int rrw; 76 /* mode: 0-HDQ 1-W1 */ 77 int mode; 78 79 }; 80 81 /* HDQ register I/O routines */ 82 static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset) 83 { 84 return __raw_readl(hdq_data->hdq_base + offset); 85 } 86 87 static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val) 88 { 89 __raw_writel(val, hdq_data->hdq_base + offset); 90 } 91 92 static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset, 93 u8 val, u8 mask) 94 { 95 u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask) 96 | (val & mask); 97 __raw_writel(new_val, hdq_data->hdq_base + offset); 98 99 return new_val; 100 } 101 102 static void hdq_disable_interrupt(struct hdq_data *hdq_data, u32 offset, 103 u32 mask) 104 { 105 u32 ie; 106 107 ie = readl(hdq_data->hdq_base + offset); 108 writel(ie & mask, hdq_data->hdq_base + offset); 109 } 110 111 /* 112 * Wait for one or more bits in flag change. 113 * HDQ_FLAG_SET: wait until any bit in the flag is set. 114 * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared. 115 * return 0 on success and -ETIMEDOUT in the case of timeout. 116 */ 117 static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset, 118 u8 flag, u8 flag_set, u8 *status) 119 { 120 int ret = 0; 121 unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; 122 123 if (flag_set == OMAP_HDQ_FLAG_CLEAR) { 124 /* wait for the flag clear */ 125 while (((*status = hdq_reg_in(hdq_data, offset)) & flag) 126 && time_before(jiffies, timeout)) { 127 schedule_timeout_uninterruptible(1); 128 } 129 if (*status & flag) 130 ret = -ETIMEDOUT; 131 } else if (flag_set == OMAP_HDQ_FLAG_SET) { 132 /* wait for the flag set */ 133 while (!((*status = hdq_reg_in(hdq_data, offset)) & flag) 134 && time_before(jiffies, timeout)) { 135 schedule_timeout_uninterruptible(1); 136 } 137 if (!(*status & flag)) 138 ret = -ETIMEDOUT; 139 } else 140 return -EINVAL; 141 142 return ret; 143 } 144 145 /* write out a byte and fill *status with HDQ_INT_STATUS */ 146 static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status) 147 { 148 int ret; 149 u8 tmp_status; 150 unsigned long irqflags; 151 152 *status = 0; 153 154 spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); 155 /* clear interrupt flags via a dummy read */ 156 hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); 157 /* ISR loads it with new INT_STATUS */ 158 hdq_data->hdq_irqstatus = 0; 159 spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); 160 161 hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val); 162 163 /* set the GO bit */ 164 hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO, 165 OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); 166 /* wait for the TXCOMPLETE bit */ 167 ret = wait_event_timeout(hdq_wait_queue, 168 hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); 169 if (ret == 0) { 170 dev_dbg(hdq_data->dev, "TX wait elapsed\n"); 171 ret = -ETIMEDOUT; 172 goto out; 173 } 174 175 *status = hdq_data->hdq_irqstatus; 176 /* check irqstatus */ 177 if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) { 178 dev_dbg(hdq_data->dev, "timeout waiting for" 179 " TXCOMPLETE/RXCOMPLETE, %x", *status); 180 ret = -ETIMEDOUT; 181 goto out; 182 } 183 184 /* wait for the GO bit return to zero */ 185 ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, 186 OMAP_HDQ_CTRL_STATUS_GO, 187 OMAP_HDQ_FLAG_CLEAR, &tmp_status); 188 if (ret) { 189 dev_dbg(hdq_data->dev, "timeout waiting GO bit" 190 " return to zero, %x", tmp_status); 191 } 192 193 out: 194 return ret; 195 } 196 197 /* HDQ Interrupt service routine */ 198 static irqreturn_t hdq_isr(int irq, void *_hdq) 199 { 200 struct hdq_data *hdq_data = _hdq; 201 unsigned long irqflags; 202 203 spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); 204 hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); 205 spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); 206 dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus); 207 208 if (hdq_data->hdq_irqstatus & 209 (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE 210 | OMAP_HDQ_INT_STATUS_TIMEOUT)) { 211 /* wake up sleeping process */ 212 wake_up(&hdq_wait_queue); 213 } 214 215 return IRQ_HANDLED; 216 } 217 218 /* W1 search callback function in HDQ mode */ 219 static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev, 220 u8 search_type, w1_slave_found_callback slave_found) 221 { 222 u64 module_id, rn_le, cs, id; 223 224 if (w1_id) 225 module_id = w1_id; 226 else 227 module_id = 0x1; 228 229 rn_le = cpu_to_le64(module_id); 230 /* 231 * HDQ might not obey truly the 1-wire spec. 232 * So calculate CRC based on module parameter. 233 */ 234 cs = w1_calc_crc8((u8 *)&rn_le, 7); 235 id = (cs << 56) | module_id; 236 237 slave_found(master_dev, id); 238 } 239 240 static int _omap_hdq_reset(struct hdq_data *hdq_data) 241 { 242 int ret; 243 u8 tmp_status; 244 245 hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, 246 OMAP_HDQ_SYSCONFIG_SOFTRESET); 247 /* 248 * Select HDQ/1W mode & enable clocks. 249 * It is observed that INT flags can't be cleared via a read and GO/INIT 250 * won't return to zero if interrupt is disabled. So we always enable 251 * interrupt. 252 */ 253 hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, 254 OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | 255 OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); 256 257 /* wait for reset to complete */ 258 ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS, 259 OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status); 260 if (ret) 261 dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x", 262 tmp_status); 263 else { 264 hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, 265 OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | 266 OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK | 267 hdq_data->mode); 268 hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, 269 OMAP_HDQ_SYSCONFIG_AUTOIDLE); 270 } 271 272 return ret; 273 } 274 275 /* Issue break pulse to the device */ 276 static int omap_hdq_break(struct hdq_data *hdq_data) 277 { 278 int ret = 0; 279 u8 tmp_status; 280 unsigned long irqflags; 281 282 ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); 283 if (ret < 0) { 284 dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); 285 ret = -EINTR; 286 goto rtn; 287 } 288 289 spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); 290 /* clear interrupt flags via a dummy read */ 291 hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); 292 /* ISR loads it with new INT_STATUS */ 293 hdq_data->hdq_irqstatus = 0; 294 spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); 295 296 /* set the INIT and GO bit */ 297 hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 298 OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO, 299 OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION | 300 OMAP_HDQ_CTRL_STATUS_GO); 301 302 /* wait for the TIMEOUT bit */ 303 ret = wait_event_timeout(hdq_wait_queue, 304 hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); 305 if (ret == 0) { 306 dev_dbg(hdq_data->dev, "break wait elapsed\n"); 307 ret = -EINTR; 308 goto out; 309 } 310 311 tmp_status = hdq_data->hdq_irqstatus; 312 /* check irqstatus */ 313 if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) { 314 dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x", 315 tmp_status); 316 ret = -ETIMEDOUT; 317 goto out; 318 } 319 320 /* 321 * check for the presence detect bit to get 322 * set to show that the slave is responding 323 */ 324 if (!(hdq_reg_in(hdq_data, OMAP_HDQ_CTRL_STATUS) & 325 OMAP_HDQ_CTRL_STATUS_PRESENCE)) { 326 dev_dbg(hdq_data->dev, "Presence bit not set\n"); 327 ret = -ETIMEDOUT; 328 goto out; 329 } 330 331 /* 332 * wait for both INIT and GO bits rerurn to zero. 333 * zero wait time expected for interrupt mode. 334 */ 335 ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, 336 OMAP_HDQ_CTRL_STATUS_INITIALIZATION | 337 OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR, 338 &tmp_status); 339 if (ret) 340 dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits" 341 " return to zero, %x", tmp_status); 342 343 out: 344 mutex_unlock(&hdq_data->hdq_mutex); 345 rtn: 346 return ret; 347 } 348 349 static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val) 350 { 351 int ret = 0; 352 u8 status; 353 354 ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); 355 if (ret < 0) { 356 ret = -EINTR; 357 goto rtn; 358 } 359 360 if (!hdq_data->hdq_usecount) { 361 ret = -EINVAL; 362 goto out; 363 } 364 365 if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { 366 hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 367 OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO, 368 OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); 369 /* 370 * The RX comes immediately after TX. 371 */ 372 wait_event_timeout(hdq_wait_queue, 373 (hdq_data->hdq_irqstatus 374 & OMAP_HDQ_INT_STATUS_RXCOMPLETE), 375 OMAP_HDQ_TIMEOUT); 376 377 hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0, 378 OMAP_HDQ_CTRL_STATUS_DIR); 379 status = hdq_data->hdq_irqstatus; 380 /* check irqstatus */ 381 if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { 382 dev_dbg(hdq_data->dev, "timeout waiting for" 383 " RXCOMPLETE, %x", status); 384 ret = -ETIMEDOUT; 385 goto out; 386 } 387 } 388 /* the data is ready. Read it in! */ 389 *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA); 390 out: 391 mutex_unlock(&hdq_data->hdq_mutex); 392 rtn: 393 return ret; 394 395 } 396 397 /* Enable clocks and set the controller to HDQ/1W mode */ 398 static int omap_hdq_get(struct hdq_data *hdq_data) 399 { 400 int ret = 0; 401 402 ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); 403 if (ret < 0) { 404 ret = -EINTR; 405 goto rtn; 406 } 407 408 if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) { 409 dev_dbg(hdq_data->dev, "attempt to exceed the max use count"); 410 ret = -EINVAL; 411 goto out; 412 } else { 413 hdq_data->hdq_usecount++; 414 try_module_get(THIS_MODULE); 415 if (1 == hdq_data->hdq_usecount) { 416 417 pm_runtime_get_sync(hdq_data->dev); 418 419 /* make sure HDQ/1W is out of reset */ 420 if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) & 421 OMAP_HDQ_SYSSTATUS_RESETDONE)) { 422 ret = _omap_hdq_reset(hdq_data); 423 if (ret) 424 /* back up the count */ 425 hdq_data->hdq_usecount--; 426 } else { 427 /* select HDQ/1W mode & enable clocks */ 428 hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, 429 OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | 430 OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK | 431 hdq_data->mode); 432 hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, 433 OMAP_HDQ_SYSCONFIG_NOIDLE); 434 hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); 435 } 436 } 437 } 438 439 out: 440 mutex_unlock(&hdq_data->hdq_mutex); 441 rtn: 442 return ret; 443 } 444 445 /* Disable clocks to the module */ 446 static int omap_hdq_put(struct hdq_data *hdq_data) 447 { 448 int ret = 0; 449 450 ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); 451 if (ret < 0) 452 return -EINTR; 453 454 hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, 455 OMAP_HDQ_SYSCONFIG_AUTOIDLE); 456 if (0 == hdq_data->hdq_usecount) { 457 dev_dbg(hdq_data->dev, "attempt to decrement use count" 458 " when it is zero"); 459 ret = -EINVAL; 460 } else { 461 hdq_data->hdq_usecount--; 462 module_put(THIS_MODULE); 463 if (0 == hdq_data->hdq_usecount) 464 pm_runtime_put_sync(hdq_data->dev); 465 } 466 mutex_unlock(&hdq_data->hdq_mutex); 467 468 return ret; 469 } 470 471 /* 472 * W1 triplet callback function - used for searching ROM addresses. 473 * Registered only when controller is in 1-wire mode. 474 */ 475 static u8 omap_w1_triplet(void *_hdq, u8 bdir) 476 { 477 u8 id_bit, comp_bit; 478 int err; 479 u8 ret = 0x3; /* no slaves responded */ 480 struct hdq_data *hdq_data = _hdq; 481 u8 ctrl = OMAP_HDQ_CTRL_STATUS_SINGLE | OMAP_HDQ_CTRL_STATUS_GO | 482 OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK; 483 u8 mask = ctrl | OMAP_HDQ_CTRL_STATUS_DIR; 484 485 omap_hdq_get(_hdq); 486 487 err = mutex_lock_interruptible(&hdq_data->hdq_mutex); 488 if (err < 0) { 489 dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); 490 goto rtn; 491 } 492 493 hdq_data->hdq_irqstatus = 0; 494 /* read id_bit */ 495 hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, 496 ctrl | OMAP_HDQ_CTRL_STATUS_DIR, mask); 497 err = wait_event_timeout(hdq_wait_queue, 498 (hdq_data->hdq_irqstatus 499 & OMAP_HDQ_INT_STATUS_RXCOMPLETE), 500 OMAP_HDQ_TIMEOUT); 501 if (err == 0) { 502 dev_dbg(hdq_data->dev, "RX wait elapsed\n"); 503 goto out; 504 } 505 id_bit = (hdq_reg_in(_hdq, OMAP_HDQ_RX_DATA) & 0x01); 506 507 hdq_data->hdq_irqstatus = 0; 508 /* read comp_bit */ 509 hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, 510 ctrl | OMAP_HDQ_CTRL_STATUS_DIR, mask); 511 err = wait_event_timeout(hdq_wait_queue, 512 (hdq_data->hdq_irqstatus 513 & OMAP_HDQ_INT_STATUS_RXCOMPLETE), 514 OMAP_HDQ_TIMEOUT); 515 if (err == 0) { 516 dev_dbg(hdq_data->dev, "RX wait elapsed\n"); 517 goto out; 518 } 519 comp_bit = (hdq_reg_in(_hdq, OMAP_HDQ_RX_DATA) & 0x01); 520 521 if (id_bit && comp_bit) { 522 ret = 0x03; /* no slaves responded */ 523 goto out; 524 } 525 if (!id_bit && !comp_bit) { 526 /* Both bits are valid, take the direction given */ 527 ret = bdir ? 0x04 : 0; 528 } else { 529 /* Only one bit is valid, take that direction */ 530 bdir = id_bit; 531 ret = id_bit ? 0x05 : 0x02; 532 } 533 534 /* write bdir bit */ 535 hdq_reg_out(_hdq, OMAP_HDQ_TX_DATA, bdir); 536 hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, ctrl, mask); 537 err = wait_event_timeout(hdq_wait_queue, 538 (hdq_data->hdq_irqstatus 539 & OMAP_HDQ_INT_STATUS_TXCOMPLETE), 540 OMAP_HDQ_TIMEOUT); 541 if (err == 0) { 542 dev_dbg(hdq_data->dev, "TX wait elapsed\n"); 543 goto out; 544 } 545 546 hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, 0, 547 OMAP_HDQ_CTRL_STATUS_SINGLE); 548 549 out: 550 mutex_unlock(&hdq_data->hdq_mutex); 551 rtn: 552 omap_hdq_put(_hdq); 553 return ret; 554 } 555 556 /* reset callback */ 557 static u8 omap_w1_reset_bus(void *_hdq) 558 { 559 omap_hdq_get(_hdq); 560 omap_hdq_break(_hdq); 561 omap_hdq_put(_hdq); 562 return 0; 563 } 564 565 /* Read a byte of data from the device */ 566 static u8 omap_w1_read_byte(void *_hdq) 567 { 568 struct hdq_data *hdq_data = _hdq; 569 u8 val = 0; 570 int ret; 571 572 /* First write to initialize the transfer */ 573 if (hdq_data->init_trans == 0) 574 omap_hdq_get(hdq_data); 575 576 ret = hdq_read_byte(hdq_data, &val); 577 if (ret) { 578 ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); 579 if (ret < 0) { 580 dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); 581 return -EINTR; 582 } 583 hdq_data->init_trans = 0; 584 mutex_unlock(&hdq_data->hdq_mutex); 585 omap_hdq_put(hdq_data); 586 return -1; 587 } 588 589 hdq_disable_interrupt(hdq_data, OMAP_HDQ_CTRL_STATUS, 590 ~OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); 591 592 /* Write followed by a read, release the module */ 593 if (hdq_data->init_trans) { 594 ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); 595 if (ret < 0) { 596 dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); 597 return -EINTR; 598 } 599 hdq_data->init_trans = 0; 600 mutex_unlock(&hdq_data->hdq_mutex); 601 omap_hdq_put(hdq_data); 602 } 603 604 return val; 605 } 606 607 /* Write a byte of data to the device */ 608 static void omap_w1_write_byte(void *_hdq, u8 byte) 609 { 610 struct hdq_data *hdq_data = _hdq; 611 int ret; 612 u8 status; 613 614 /* First write to initialize the transfer */ 615 if (hdq_data->init_trans == 0) 616 omap_hdq_get(hdq_data); 617 618 /* 619 * We need to reset the slave before 620 * issuing the SKIP ROM command, else 621 * the slave will not work. 622 */ 623 if (byte == W1_SKIP_ROM) 624 omap_hdq_break(hdq_data); 625 626 ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); 627 if (ret < 0) { 628 dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); 629 return; 630 } 631 hdq_data->init_trans++; 632 mutex_unlock(&hdq_data->hdq_mutex); 633 634 ret = hdq_write_byte(hdq_data, byte, &status); 635 if (ret < 0) { 636 dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status); 637 return; 638 } 639 640 /* Second write, data transferred. Release the module */ 641 if (hdq_data->init_trans > 1) { 642 omap_hdq_put(hdq_data); 643 ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); 644 if (ret < 0) { 645 dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); 646 return; 647 } 648 hdq_data->init_trans = 0; 649 mutex_unlock(&hdq_data->hdq_mutex); 650 } 651 } 652 653 static struct w1_bus_master omap_w1_master = { 654 .read_byte = omap_w1_read_byte, 655 .write_byte = omap_w1_write_byte, 656 .reset_bus = omap_w1_reset_bus, 657 }; 658 659 static int omap_hdq_probe(struct platform_device *pdev) 660 { 661 struct device *dev = &pdev->dev; 662 struct hdq_data *hdq_data; 663 struct resource *res; 664 int ret, irq; 665 u8 rev; 666 const char *mode; 667 668 hdq_data = devm_kzalloc(dev, sizeof(*hdq_data), GFP_KERNEL); 669 if (!hdq_data) { 670 dev_dbg(&pdev->dev, "unable to allocate memory\n"); 671 return -ENOMEM; 672 } 673 674 hdq_data->dev = dev; 675 platform_set_drvdata(pdev, hdq_data); 676 677 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 678 hdq_data->hdq_base = devm_ioremap_resource(dev, res); 679 if (IS_ERR(hdq_data->hdq_base)) 680 return PTR_ERR(hdq_data->hdq_base); 681 682 hdq_data->hdq_usecount = 0; 683 hdq_data->rrw = 0; 684 mutex_init(&hdq_data->hdq_mutex); 685 686 pm_runtime_enable(&pdev->dev); 687 ret = pm_runtime_get_sync(&pdev->dev); 688 if (ret < 0) { 689 dev_dbg(&pdev->dev, "pm_runtime_get_sync failed\n"); 690 goto err_w1; 691 } 692 693 ret = _omap_hdq_reset(hdq_data); 694 if (ret) { 695 dev_dbg(&pdev->dev, "reset failed\n"); 696 goto err_irq; 697 } 698 699 rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION); 700 dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n", 701 (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt"); 702 703 spin_lock_init(&hdq_data->hdq_spinlock); 704 705 irq = platform_get_irq(pdev, 0); 706 if (irq < 0) { 707 dev_dbg(&pdev->dev, "Failed to get IRQ: %d\n", irq); 708 ret = irq; 709 goto err_irq; 710 } 711 712 ret = devm_request_irq(dev, irq, hdq_isr, 0, "omap_hdq", hdq_data); 713 if (ret < 0) { 714 dev_dbg(&pdev->dev, "could not request irq\n"); 715 goto err_irq; 716 } 717 718 omap_hdq_break(hdq_data); 719 720 pm_runtime_put_sync(&pdev->dev); 721 722 ret = of_property_read_string(pdev->dev.of_node, "ti,mode", &mode); 723 if (ret < 0 || !strcmp(mode, "hdq")) { 724 hdq_data->mode = 0; 725 omap_w1_master.search = omap_w1_search_bus; 726 } else { 727 hdq_data->mode = 1; 728 omap_w1_master.triplet = omap_w1_triplet; 729 } 730 731 omap_w1_master.data = hdq_data; 732 733 ret = w1_add_master_device(&omap_w1_master); 734 if (ret) { 735 dev_dbg(&pdev->dev, "Failure in registering w1 master\n"); 736 goto err_w1; 737 } 738 739 return 0; 740 741 err_irq: 742 pm_runtime_put_sync(&pdev->dev); 743 err_w1: 744 pm_runtime_disable(&pdev->dev); 745 746 return ret; 747 } 748 749 static int omap_hdq_remove(struct platform_device *pdev) 750 { 751 struct hdq_data *hdq_data = platform_get_drvdata(pdev); 752 753 mutex_lock(&hdq_data->hdq_mutex); 754 755 if (hdq_data->hdq_usecount) { 756 dev_dbg(&pdev->dev, "removed when use count is not zero\n"); 757 mutex_unlock(&hdq_data->hdq_mutex); 758 return -EBUSY; 759 } 760 761 mutex_unlock(&hdq_data->hdq_mutex); 762 763 /* remove module dependency */ 764 pm_runtime_disable(&pdev->dev); 765 766 return 0; 767 } 768 769 static const struct of_device_id omap_hdq_dt_ids[] = { 770 { .compatible = "ti,omap3-1w" }, 771 { .compatible = "ti,am4372-hdq" }, 772 {} 773 }; 774 MODULE_DEVICE_TABLE(of, omap_hdq_dt_ids); 775 776 static struct platform_driver omap_hdq_driver = { 777 .probe = omap_hdq_probe, 778 .remove = omap_hdq_remove, 779 .driver = { 780 .name = "omap_hdq", 781 .of_match_table = omap_hdq_dt_ids, 782 }, 783 }; 784 module_platform_driver(omap_hdq_driver); 785 786 MODULE_AUTHOR("Texas Instruments"); 787 MODULE_DESCRIPTION("HDQ-1W driver Library"); 788 MODULE_LICENSE("GPL"); 789