xref: /openbmc/linux/drivers/w1/masters/ds2490.c (revision 22246614)
1 /*
2  *	dscore.c
3  *
4  * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
5  *
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20  */
21 
22 #include <linux/module.h>
23 #include <linux/kernel.h>
24 #include <linux/mod_devicetable.h>
25 #include <linux/usb.h>
26 
27 #include "../w1_int.h"
28 #include "../w1.h"
29 
30 /* COMMAND TYPE CODES */
31 #define CONTROL_CMD			0x00
32 #define COMM_CMD			0x01
33 #define MODE_CMD			0x02
34 
35 /* CONTROL COMMAND CODES */
36 #define CTL_RESET_DEVICE		0x0000
37 #define CTL_START_EXE			0x0001
38 #define CTL_RESUME_EXE			0x0002
39 #define CTL_HALT_EXE_IDLE		0x0003
40 #define CTL_HALT_EXE_DONE		0x0004
41 #define CTL_FLUSH_COMM_CMDS		0x0007
42 #define CTL_FLUSH_RCV_BUFFER		0x0008
43 #define CTL_FLUSH_XMT_BUFFER		0x0009
44 #define CTL_GET_COMM_CMDS		0x000A
45 
46 /* MODE COMMAND CODES */
47 #define MOD_PULSE_EN			0x0000
48 #define MOD_SPEED_CHANGE_EN		0x0001
49 #define MOD_1WIRE_SPEED			0x0002
50 #define MOD_STRONG_PU_DURATION		0x0003
51 #define MOD_PULLDOWN_SLEWRATE		0x0004
52 #define MOD_PROG_PULSE_DURATION		0x0005
53 #define MOD_WRITE1_LOWTIME		0x0006
54 #define MOD_DSOW0_TREC			0x0007
55 
56 /* COMMUNICATION COMMAND CODES */
57 #define COMM_ERROR_ESCAPE		0x0601
58 #define COMM_SET_DURATION		0x0012
59 #define COMM_BIT_IO			0x0020
60 #define COMM_PULSE			0x0030
61 #define COMM_1_WIRE_RESET		0x0042
62 #define COMM_BYTE_IO			0x0052
63 #define COMM_MATCH_ACCESS		0x0064
64 #define COMM_BLOCK_IO			0x0074
65 #define COMM_READ_STRAIGHT		0x0080
66 #define COMM_DO_RELEASE			0x6092
67 #define COMM_SET_PATH			0x00A2
68 #define COMM_WRITE_SRAM_PAGE		0x00B2
69 #define COMM_WRITE_EPROM		0x00C4
70 #define COMM_READ_CRC_PROT_PAGE		0x00D4
71 #define COMM_READ_REDIRECT_PAGE_CRC	0x21E4
72 #define COMM_SEARCH_ACCESS		0x00F4
73 
74 /* Communication command bits */
75 #define COMM_TYPE			0x0008
76 #define COMM_SE				0x0008
77 #define COMM_D				0x0008
78 #define COMM_Z				0x0008
79 #define COMM_CH				0x0008
80 #define COMM_SM				0x0008
81 #define COMM_R				0x0008
82 #define COMM_IM				0x0001
83 
84 #define COMM_PS				0x4000
85 #define COMM_PST			0x4000
86 #define COMM_CIB			0x4000
87 #define COMM_RTS			0x4000
88 #define COMM_DT				0x2000
89 #define COMM_SPU			0x1000
90 #define COMM_F				0x0800
91 #define COMM_NTP			0x0400
92 #define COMM_ICP			0x0200
93 #define COMM_RST			0x0100
94 
95 #define PULSE_PROG			0x01
96 #define PULSE_SPUE			0x02
97 
98 #define BRANCH_MAIN			0xCC
99 #define BRANCH_AUX			0x33
100 
101 /*
102  * Duration of the strong pull-up pulse in milliseconds.
103  */
104 #define PULLUP_PULSE_DURATION		750
105 
106 /* Status flags */
107 #define ST_SPUA				0x01  /* Strong Pull-up is active */
108 #define ST_PRGA				0x02  /* 12V programming pulse is being generated */
109 #define ST_12VP				0x04  /* external 12V programming voltage is present */
110 #define ST_PMOD				0x08  /* DS2490 powered from USB and external sources */
111 #define ST_HALT				0x10  /* DS2490 is currently halted */
112 #define ST_IDLE				0x20  /* DS2490 is currently idle */
113 #define ST_EPOF				0x80
114 
115 #define SPEED_NORMAL			0x00
116 #define SPEED_FLEXIBLE			0x01
117 #define SPEED_OVERDRIVE			0x02
118 
119 #define NUM_EP				4
120 #define EP_CONTROL			0
121 #define EP_STATUS			1
122 #define EP_DATA_OUT			2
123 #define EP_DATA_IN			3
124 
125 struct ds_device
126 {
127 	struct list_head	ds_entry;
128 
129 	struct usb_device	*udev;
130 	struct usb_interface	*intf;
131 
132 	int			ep[NUM_EP];
133 
134 	struct w1_bus_master	master;
135 };
136 
137 struct ds_status
138 {
139 	u8			enable;
140 	u8			speed;
141 	u8			pullup_dur;
142 	u8			ppuls_dur;
143 	u8			pulldown_slew;
144 	u8			write1_time;
145 	u8			write0_time;
146 	u8			reserved0;
147 	u8			status;
148 	u8			command0;
149 	u8			command1;
150 	u8			command_buffer_status;
151 	u8			data_out_buffer_status;
152 	u8			data_in_buffer_status;
153 	u8			reserved1;
154 	u8			reserved2;
155 
156 };
157 
158 static struct usb_device_id ds_id_table [] = {
159 	{ USB_DEVICE(0x04fa, 0x2490) },
160 	{ },
161 };
162 MODULE_DEVICE_TABLE(usb, ds_id_table);
163 
164 static int ds_probe(struct usb_interface *, const struct usb_device_id *);
165 static void ds_disconnect(struct usb_interface *);
166 
167 static inline void ds_dump_status(unsigned char *, unsigned char *, int);
168 static int ds_send_control(struct ds_device *, u16, u16);
169 static int ds_send_control_cmd(struct ds_device *, u16, u16);
170 
171 static LIST_HEAD(ds_devices);
172 static DEFINE_MUTEX(ds_mutex);
173 
174 static struct usb_driver ds_driver = {
175 	.name =		"DS9490R",
176 	.probe =	ds_probe,
177 	.disconnect =	ds_disconnect,
178 	.id_table =	ds_id_table,
179 };
180 
181 static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
182 {
183 	int err;
184 
185 	err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
186 			CONTROL_CMD, 0x40, value, index, NULL, 0, 1000);
187 	if (err < 0) {
188 		printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n",
189 				value, index, err);
190 		return err;
191 	}
192 
193 	return err;
194 }
195 #if 0
196 static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
197 {
198 	int err;
199 
200 	err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
201 			MODE_CMD, 0x40, value, index, NULL, 0, 1000);
202 	if (err < 0) {
203 		printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n",
204 				value, index, err);
205 		return err;
206 	}
207 
208 	return err;
209 }
210 #endif
211 static int ds_send_control(struct ds_device *dev, u16 value, u16 index)
212 {
213 	int err;
214 
215 	err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
216 			COMM_CMD, 0x40, value, index, NULL, 0, 1000);
217 	if (err < 0) {
218 		printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n",
219 				value, index, err);
220 		return err;
221 	}
222 
223 	return err;
224 }
225 
226 static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off)
227 {
228 	printk("%45s: %8x\n", str, buf[off]);
229 }
230 
231 static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st,
232 				 unsigned char *buf, int size)
233 {
234 	int count, err;
235 
236 	memset(st, 0, sizeof(*st));
237 
238 	count = 0;
239 	err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100);
240 	if (err < 0) {
241 		printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err);
242 		return err;
243 	}
244 
245 	if (count >= sizeof(*st))
246 		memcpy(st, buf, sizeof(*st));
247 
248 	return count;
249 }
250 
251 static int ds_recv_status(struct ds_device *dev, struct ds_status *st)
252 {
253 	unsigned char buf[64];
254 	int count, err = 0, i;
255 
256 	memcpy(st, buf, sizeof(*st));
257 
258 	count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
259 	if (count < 0)
260 		return err;
261 
262 	printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count);
263 	for (i=0; i<count; ++i)
264 		printk("%02x ", buf[i]);
265 	printk("\n");
266 
267 	if (count >= 16) {
268 		ds_dump_status(buf, "enable flag", 0);
269 		ds_dump_status(buf, "1-wire speed", 1);
270 		ds_dump_status(buf, "strong pullup duration", 2);
271 		ds_dump_status(buf, "programming pulse duration", 3);
272 		ds_dump_status(buf, "pulldown slew rate control", 4);
273 		ds_dump_status(buf, "write-1 low time", 5);
274 		ds_dump_status(buf, "data sample offset/write-0 recovery time", 6);
275 		ds_dump_status(buf, "reserved (test register)", 7);
276 		ds_dump_status(buf, "device status flags", 8);
277 		ds_dump_status(buf, "communication command byte 1", 9);
278 		ds_dump_status(buf, "communication command byte 2", 10);
279 		ds_dump_status(buf, "communication command buffer status", 11);
280 		ds_dump_status(buf, "1-wire data output buffer status", 12);
281 		ds_dump_status(buf, "1-wire data input buffer status", 13);
282 		ds_dump_status(buf, "reserved", 14);
283 		ds_dump_status(buf, "reserved", 15);
284 	}
285 
286 	memcpy(st, buf, sizeof(*st));
287 
288 	if (st->status & ST_EPOF) {
289 		printk(KERN_INFO "Resetting device after ST_EPOF.\n");
290 		err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
291 		if (err)
292 			return err;
293 		count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
294 		if (count < 0)
295 			return err;
296 	}
297 #if 0
298 	if (st->status & ST_IDLE) {
299 		printk(KERN_INFO "Resetting pulse after ST_IDLE.\n");
300 		err = ds_start_pulse(dev, PULLUP_PULSE_DURATION);
301 		if (err)
302 			return err;
303 	}
304 #endif
305 
306 	return err;
307 }
308 
309 static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size)
310 {
311 	int count, err;
312 	struct ds_status st;
313 
314 	count = 0;
315 	err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]),
316 				buf, size, &count, 1000);
317 	if (err < 0) {
318 		printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]);
319 		usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]));
320 		ds_recv_status(dev, &st);
321 		return err;
322 	}
323 
324 #if 0
325 	{
326 		int i;
327 
328 		printk("%s: count=%d: ", __func__, count);
329 		for (i=0; i<count; ++i)
330 			printk("%02x ", buf[i]);
331 		printk("\n");
332 	}
333 #endif
334 	return count;
335 }
336 
337 static int ds_send_data(struct ds_device *dev, unsigned char *buf, int len)
338 {
339 	int count, err;
340 
341 	count = 0;
342 	err = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000);
343 	if (err < 0) {
344 		printk(KERN_ERR "Failed to read 1-wire data from 0x02: err=%d.\n", err);
345 		return err;
346 	}
347 
348 	return err;
349 }
350 
351 #if 0
352 
353 int ds_stop_pulse(struct ds_device *dev, int limit)
354 {
355 	struct ds_status st;
356 	int count = 0, err = 0;
357 	u8 buf[0x20];
358 
359 	do {
360 		err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0);
361 		if (err)
362 			break;
363 		err = ds_send_control(dev, CTL_RESUME_EXE, 0);
364 		if (err)
365 			break;
366 		err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf));
367 		if (err)
368 			break;
369 
370 		if ((st.status & ST_SPUA) == 0) {
371 			err = ds_send_control_mode(dev, MOD_PULSE_EN, 0);
372 			if (err)
373 				break;
374 		}
375 	} while(++count < limit);
376 
377 	return err;
378 }
379 
380 int ds_detect(struct ds_device *dev, struct ds_status *st)
381 {
382 	int err;
383 
384 	err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
385 	if (err)
386 		return err;
387 
388 	err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0);
389 	if (err)
390 		return err;
391 
392 	err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40);
393 	if (err)
394 		return err;
395 
396 	err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG);
397 	if (err)
398 		return err;
399 
400 	err = ds_recv_status(dev, st);
401 
402 	return err;
403 }
404 
405 #endif  /*  0  */
406 
407 static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
408 {
409 	u8 buf[0x20];
410 	int err, count = 0;
411 
412 	do {
413 		err = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
414 #if 0
415 		if (err >= 0) {
416 			int i;
417 			printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err);
418 			for (i=0; i<err; ++i)
419 				printk("%02x ", buf[i]);
420 			printk("\n");
421 		}
422 #endif
423 	} while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100);
424 
425 
426 	if (((err > 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) {
427 		ds_recv_status(dev, st);
428 		return -1;
429 	} else
430 		return 0;
431 }
432 
433 static int ds_reset(struct ds_device *dev, struct ds_status *st)
434 {
435 	int err;
436 
437 	//err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE);
438 	err = ds_send_control(dev, 0x43, SPEED_NORMAL);
439 	if (err)
440 		return err;
441 
442 	ds_wait_status(dev, st);
443 #if 0
444 	if (st->command_buffer_status) {
445 		printk(KERN_INFO "Short circuit.\n");
446 		return -EIO;
447 	}
448 #endif
449 
450 	return 0;
451 }
452 
453 #if 0
454 static int ds_set_speed(struct ds_device *dev, int speed)
455 {
456 	int err;
457 
458 	if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE)
459 		return -EINVAL;
460 
461 	if (speed != SPEED_OVERDRIVE)
462 		speed = SPEED_FLEXIBLE;
463 
464 	speed &= 0xff;
465 
466 	err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed);
467 	if (err)
468 		return err;
469 
470 	return err;
471 }
472 #endif  /*  0  */
473 
474 static int ds_start_pulse(struct ds_device *dev, int delay)
475 {
476 	int err;
477 	u8 del = 1 + (u8)(delay >> 4);
478 	struct ds_status st;
479 
480 #if 0
481 	err = ds_stop_pulse(dev, 10);
482 	if (err)
483 		return err;
484 
485 	err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE);
486 	if (err)
487 		return err;
488 #endif
489 	err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del);
490 	if (err)
491 		return err;
492 
493 	err = ds_send_control(dev, COMM_PULSE | COMM_IM | COMM_F, 0);
494 	if (err)
495 		return err;
496 
497 	mdelay(delay);
498 
499 	ds_wait_status(dev, &st);
500 
501 	return err;
502 }
503 
504 static int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
505 {
506 	int err, count;
507 	struct ds_status st;
508 	u16 value = (COMM_BIT_IO | COMM_IM) | ((bit) ? COMM_D : 0);
509 	u16 cmd;
510 
511 	err = ds_send_control(dev, value, 0);
512 	if (err)
513 		return err;
514 
515 	count = 0;
516 	do {
517 		err = ds_wait_status(dev, &st);
518 		if (err)
519 			return err;
520 
521 		cmd = st.command0 | (st.command1 << 8);
522 	} while (cmd != value && ++count < 10);
523 
524 	if (err < 0 || count >= 10) {
525 		printk(KERN_ERR "Failed to obtain status.\n");
526 		return -EINVAL;
527 	}
528 
529 	err = ds_recv_data(dev, tbit, sizeof(*tbit));
530 	if (err < 0)
531 		return err;
532 
533 	return 0;
534 }
535 
536 static int ds_write_bit(struct ds_device *dev, u8 bit)
537 {
538 	int err;
539 	struct ds_status st;
540 
541 	err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0);
542 	if (err)
543 		return err;
544 
545 	ds_wait_status(dev, &st);
546 
547 	return 0;
548 }
549 
550 static int ds_write_byte(struct ds_device *dev, u8 byte)
551 {
552 	int err;
553 	struct ds_status st;
554 	u8 rbyte;
555 
556 	err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | COMM_SPU, byte);
557 	if (err)
558 		return err;
559 
560 	err = ds_wait_status(dev, &st);
561 	if (err)
562 		return err;
563 
564 	err = ds_recv_data(dev, &rbyte, sizeof(rbyte));
565 	if (err < 0)
566 		return err;
567 
568 	ds_start_pulse(dev, PULLUP_PULSE_DURATION);
569 
570 	return !(byte == rbyte);
571 }
572 
573 static int ds_read_byte(struct ds_device *dev, u8 *byte)
574 {
575 	int err;
576 	struct ds_status st;
577 
578 	err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff);
579 	if (err)
580 		return err;
581 
582 	ds_wait_status(dev, &st);
583 
584 	err = ds_recv_data(dev, byte, sizeof(*byte));
585 	if (err < 0)
586 		return err;
587 
588 	return 0;
589 }
590 
591 static int ds_read_block(struct ds_device *dev, u8 *buf, int len)
592 {
593 	struct ds_status st;
594 	int err;
595 
596 	if (len > 64*1024)
597 		return -E2BIG;
598 
599 	memset(buf, 0xFF, len);
600 
601 	err = ds_send_data(dev, buf, len);
602 	if (err < 0)
603 		return err;
604 
605 	err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len);
606 	if (err)
607 		return err;
608 
609 	ds_wait_status(dev, &st);
610 
611 	memset(buf, 0x00, len);
612 	err = ds_recv_data(dev, buf, len);
613 
614 	return err;
615 }
616 
617 static int ds_write_block(struct ds_device *dev, u8 *buf, int len)
618 {
619 	int err;
620 	struct ds_status st;
621 
622 	err = ds_send_data(dev, buf, len);
623 	if (err < 0)
624 		return err;
625 
626 	ds_wait_status(dev, &st);
627 
628 	err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len);
629 	if (err)
630 		return err;
631 
632 	ds_wait_status(dev, &st);
633 
634 	err = ds_recv_data(dev, buf, len);
635 	if (err < 0)
636 		return err;
637 
638 	ds_start_pulse(dev, PULLUP_PULSE_DURATION);
639 
640 	return !(err == len);
641 }
642 
643 #if 0
644 
645 static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
646 {
647 	int err;
648 	u16 value, index;
649 	struct ds_status st;
650 
651 	memset(buf, 0, sizeof(buf));
652 
653 	err = ds_send_data(ds_dev, (unsigned char *)&init, 8);
654 	if (err)
655 		return err;
656 
657 	ds_wait_status(ds_dev, &st);
658 
659 	value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS;
660 	index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8);
661 	err = ds_send_control(ds_dev, value, index);
662 	if (err)
663 		return err;
664 
665 	ds_wait_status(ds_dev, &st);
666 
667 	err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number);
668 	if (err < 0)
669 		return err;
670 
671 	return err/8;
672 }
673 
674 static int ds_match_access(struct ds_device *dev, u64 init)
675 {
676 	int err;
677 	struct ds_status st;
678 
679 	err = ds_send_data(dev, (unsigned char *)&init, sizeof(init));
680 	if (err)
681 		return err;
682 
683 	ds_wait_status(dev, &st);
684 
685 	err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055);
686 	if (err)
687 		return err;
688 
689 	ds_wait_status(dev, &st);
690 
691 	return 0;
692 }
693 
694 static int ds_set_path(struct ds_device *dev, u64 init)
695 {
696 	int err;
697 	struct ds_status st;
698 	u8 buf[9];
699 
700 	memcpy(buf, &init, 8);
701 	buf[8] = BRANCH_MAIN;
702 
703 	err = ds_send_data(dev, buf, sizeof(buf));
704 	if (err)
705 		return err;
706 
707 	ds_wait_status(dev, &st);
708 
709 	err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0);
710 	if (err)
711 		return err;
712 
713 	ds_wait_status(dev, &st);
714 
715 	return 0;
716 }
717 
718 #endif  /*  0  */
719 
720 static u8 ds9490r_touch_bit(void *data, u8 bit)
721 {
722 	u8 ret;
723 	struct ds_device *dev = data;
724 
725 	if (ds_touch_bit(dev, bit, &ret))
726 		return 0;
727 
728 	return ret;
729 }
730 
731 static void ds9490r_write_bit(void *data, u8 bit)
732 {
733 	struct ds_device *dev = data;
734 
735 	ds_write_bit(dev, bit);
736 }
737 
738 static void ds9490r_write_byte(void *data, u8 byte)
739 {
740 	struct ds_device *dev = data;
741 
742 	ds_write_byte(dev, byte);
743 }
744 
745 static u8 ds9490r_read_bit(void *data)
746 {
747 	struct ds_device *dev = data;
748 	int err;
749 	u8 bit = 0;
750 
751 	err = ds_touch_bit(dev, 1, &bit);
752 	if (err)
753 		return 0;
754 
755 	return bit & 1;
756 }
757 
758 static u8 ds9490r_read_byte(void *data)
759 {
760 	struct ds_device *dev = data;
761 	int err;
762 	u8 byte = 0;
763 
764 	err = ds_read_byte(dev, &byte);
765 	if (err)
766 		return 0;
767 
768 	return byte;
769 }
770 
771 static void ds9490r_write_block(void *data, const u8 *buf, int len)
772 {
773 	struct ds_device *dev = data;
774 
775 	ds_write_block(dev, (u8 *)buf, len);
776 }
777 
778 static u8 ds9490r_read_block(void *data, u8 *buf, int len)
779 {
780 	struct ds_device *dev = data;
781 	int err;
782 
783 	err = ds_read_block(dev, buf, len);
784 	if (err < 0)
785 		return 0;
786 
787 	return len;
788 }
789 
790 static u8 ds9490r_reset(void *data)
791 {
792 	struct ds_device *dev = data;
793 	struct ds_status st;
794 	int err;
795 
796 	memset(&st, 0, sizeof(st));
797 
798 	err = ds_reset(dev, &st);
799 	if (err)
800 		return 1;
801 
802 	return 0;
803 }
804 
805 static int ds_w1_init(struct ds_device *dev)
806 {
807 	memset(&dev->master, 0, sizeof(struct w1_bus_master));
808 
809 	dev->master.data	= dev;
810 	dev->master.touch_bit	= &ds9490r_touch_bit;
811 	dev->master.read_bit	= &ds9490r_read_bit;
812 	dev->master.write_bit	= &ds9490r_write_bit;
813 	dev->master.read_byte	= &ds9490r_read_byte;
814 	dev->master.write_byte	= &ds9490r_write_byte;
815 	dev->master.read_block	= &ds9490r_read_block;
816 	dev->master.write_block	= &ds9490r_write_block;
817 	dev->master.reset_bus	= &ds9490r_reset;
818 
819 	return w1_add_master_device(&dev->master);
820 }
821 
822 static void ds_w1_fini(struct ds_device *dev)
823 {
824 	w1_remove_master_device(&dev->master);
825 }
826 
827 static int ds_probe(struct usb_interface *intf,
828 		    const struct usb_device_id *udev_id)
829 {
830 	struct usb_device *udev = interface_to_usbdev(intf);
831 	struct usb_endpoint_descriptor *endpoint;
832 	struct usb_host_interface *iface_desc;
833 	struct ds_device *dev;
834 	int i, err;
835 
836 	dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
837 	if (!dev) {
838 		printk(KERN_INFO "Failed to allocate new DS9490R structure.\n");
839 		return -ENOMEM;
840 	}
841 	dev->udev = usb_get_dev(udev);
842 	if (!dev->udev) {
843 		err = -ENOMEM;
844 		goto err_out_free;
845 	}
846 	memset(dev->ep, 0, sizeof(dev->ep));
847 
848 	usb_set_intfdata(intf, dev);
849 
850 	err = usb_set_interface(dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
851 	if (err) {
852 		printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n",
853 				intf->altsetting[0].desc.bInterfaceNumber, err);
854 		goto err_out_clear;
855 	}
856 
857 	err = usb_reset_configuration(dev->udev);
858 	if (err) {
859 		printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err);
860 		goto err_out_clear;
861 	}
862 
863 	iface_desc = &intf->altsetting[0];
864 	if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
865 		printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);
866 		err = -EINVAL;
867 		goto err_out_clear;
868 	}
869 
870 	/*
871 	 * This loop doesn'd show control 0 endpoint,
872 	 * so we will fill only 1-3 endpoints entry.
873 	 */
874 	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
875 		endpoint = &iface_desc->endpoint[i].desc;
876 
877 		dev->ep[i+1] = endpoint->bEndpointAddress;
878 #if 0
879 		printk("%d: addr=%x, size=%d, dir=%s, type=%x\n",
880 			i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize),
881 			(endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT",
882 			endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
883 #endif
884 	}
885 
886 	err = ds_w1_init(dev);
887 	if (err)
888 		goto err_out_clear;
889 
890 	mutex_lock(&ds_mutex);
891 	list_add_tail(&dev->ds_entry, &ds_devices);
892 	mutex_unlock(&ds_mutex);
893 
894 	return 0;
895 
896 err_out_clear:
897 	usb_set_intfdata(intf, NULL);
898 	usb_put_dev(dev->udev);
899 err_out_free:
900 	kfree(dev);
901 	return err;
902 }
903 
904 static void ds_disconnect(struct usb_interface *intf)
905 {
906 	struct ds_device *dev;
907 
908 	dev = usb_get_intfdata(intf);
909 	if (!dev)
910 		return;
911 
912 	mutex_lock(&ds_mutex);
913 	list_del(&dev->ds_entry);
914 	mutex_unlock(&ds_mutex);
915 
916 	ds_w1_fini(dev);
917 
918 	usb_set_intfdata(intf, NULL);
919 
920 	usb_put_dev(dev->udev);
921 	kfree(dev);
922 }
923 
924 static int ds_init(void)
925 {
926 	int err;
927 
928 	err = usb_register(&ds_driver);
929 	if (err) {
930 		printk(KERN_INFO "Failed to register DS9490R USB device: err=%d.\n", err);
931 		return err;
932 	}
933 
934 	return 0;
935 }
936 
937 static void ds_fini(void)
938 {
939 	usb_deregister(&ds_driver);
940 }
941 
942 module_init(ds_init);
943 module_exit(ds_fini);
944 
945 MODULE_LICENSE("GPL");
946 MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
947 MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)");
948