1 /*
2 * Xilinx TFT frame buffer driver
3 *
4 * Author: MontaVista Software, Inc.
5 * source@mvista.com
6 *
7 * 2002-2007 (c) MontaVista Software, Inc.
8 * 2007 (c) Secret Lab Technologies, Ltd.
9 * 2009 (c) Xilinx Inc.
10 *
11 * This file is licensed under the terms of the GNU General Public License
12 * version 2. This program is licensed "as is" without any warranty of any
13 * kind, whether express or implied.
14 */
15
16 /*
17 * This driver was based on au1100fb.c by MontaVista rewritten for 2.6
18 * by Embedded Alley Solutions <source@embeddedalley.com>, which in turn
19 * was based on skeletonfb.c, Skeleton for a frame buffer device by
20 * Geert Uytterhoeven.
21 */
22
23 #include <linux/device.h>
24 #include <linux/module.h>
25 #include <linux/kernel.h>
26 #include <linux/errno.h>
27 #include <linux/platform_device.h>
28 #include <linux/string.h>
29 #include <linux/mm.h>
30 #include <linux/fb.h>
31 #include <linux/init.h>
32 #include <linux/dma-mapping.h>
33 #include <linux/of.h>
34 #include <linux/io.h>
35 #include <linux/slab.h>
36
37 #ifdef CONFIG_PPC_DCR
38 #include <asm/dcr.h>
39 #endif
40
41 #define DRIVER_NAME "xilinxfb"
42
43 /*
44 * Xilinx calls it "TFT LCD Controller" though it can also be used for
45 * the VGA port on the Xilinx ML40x board. This is a hardware display
46 * controller for a 640x480 resolution TFT or VGA screen.
47 *
48 * The interface to the framebuffer is nice and simple. There are two
49 * control registers. The first tells the LCD interface where in memory
50 * the frame buffer is (only the 11 most significant bits are used, so
51 * don't start thinking about scrolling). The second allows the LCD to
52 * be turned on or off as well as rotated 180 degrees.
53 *
54 * In case of direct BUS access the second control register will be at
55 * an offset of 4 as compared to the DCR access where the offset is 1
56 * i.e. REG_CTRL. So this is taken care in the function
57 * xilinx_fb_out32 where it left shifts the offset 2 times in case of
58 * direct BUS access.
59 */
60 #define NUM_REGS 2
61 #define REG_FB_ADDR 0
62 #define REG_CTRL 1
63 #define REG_CTRL_ENABLE 0x0001
64 #define REG_CTRL_ROTATE 0x0002
65
66 /*
67 * The hardware only handles a single mode: 640x480 24 bit true
68 * color. Each pixel gets a word (32 bits) of memory. Within each word,
69 * the 8 most significant bits are ignored, the next 8 bits are the red
70 * level, the next 8 bits are the green level and the 8 least
71 * significant bits are the blue level. Each row of the LCD uses 1024
72 * words, but only the first 640 pixels are displayed with the other 384
73 * words being ignored. There are 480 rows.
74 */
75 #define BYTES_PER_PIXEL 4
76 #define BITS_PER_PIXEL (BYTES_PER_PIXEL * 8)
77
78 #define RED_SHIFT 16
79 #define GREEN_SHIFT 8
80 #define BLUE_SHIFT 0
81
82 #define PALETTE_ENTRIES_NO 16 /* passed to fb_alloc_cmap() */
83
84 /* ML300/403 reference design framebuffer driver platform data struct */
85 struct xilinxfb_platform_data {
86 u32 rotate_screen; /* Flag to rotate display 180 degrees */
87 u32 screen_height_mm; /* Physical dimensions of screen in mm */
88 u32 screen_width_mm;
89 u32 xres, yres; /* resolution of screen in pixels */
90 u32 xvirt, yvirt; /* resolution of memory buffer */
91
92 /* Physical address of framebuffer memory; If non-zero, driver
93 * will use provided memory address instead of allocating one from
94 * the consistent pool.
95 */
96 u32 fb_phys;
97 };
98
99 /*
100 * Default xilinxfb configuration
101 */
102 static const struct xilinxfb_platform_data xilinx_fb_default_pdata = {
103 .xres = 640,
104 .yres = 480,
105 .xvirt = 1024,
106 .yvirt = 480,
107 };
108
109 /*
110 * Here are the default fb_fix_screeninfo and fb_var_screeninfo structures
111 */
112 static const struct fb_fix_screeninfo xilinx_fb_fix = {
113 .id = "Xilinx",
114 .type = FB_TYPE_PACKED_PIXELS,
115 .visual = FB_VISUAL_TRUECOLOR,
116 .accel = FB_ACCEL_NONE
117 };
118
119 static const struct fb_var_screeninfo xilinx_fb_var = {
120 .bits_per_pixel = BITS_PER_PIXEL,
121
122 .red = { RED_SHIFT, 8, 0 },
123 .green = { GREEN_SHIFT, 8, 0 },
124 .blue = { BLUE_SHIFT, 8, 0 },
125 .transp = { 0, 0, 0 },
126
127 .activate = FB_ACTIVATE_NOW
128 };
129
130 #define BUS_ACCESS_FLAG 0x1 /* 1 = BUS, 0 = DCR */
131 #define LITTLE_ENDIAN_ACCESS 0x2 /* LITTLE ENDIAN IO functions */
132
133 struct xilinxfb_drvdata {
134 struct fb_info info; /* FB driver info record */
135
136 phys_addr_t regs_phys; /* phys. address of the control
137 * registers
138 */
139 void __iomem *regs; /* virt. address of the control
140 * registers
141 */
142 #ifdef CONFIG_PPC_DCR
143 dcr_host_t dcr_host;
144 unsigned int dcr_len;
145 #endif
146 void *fb_virt; /* virt. address of the frame buffer */
147 dma_addr_t fb_phys; /* phys. address of the frame buffer */
148 int fb_alloced; /* Flag, was the fb memory alloced? */
149
150 u8 flags; /* features of the driver */
151
152 u32 reg_ctrl_default;
153
154 u32 pseudo_palette[PALETTE_ENTRIES_NO];
155 /* Fake palette of 16 colors */
156 };
157
158 #define to_xilinxfb_drvdata(_info) \
159 container_of(_info, struct xilinxfb_drvdata, info)
160
161 /*
162 * The XPS TFT Controller can be accessed through BUS or DCR interface.
163 * To perform the read/write on the registers we need to check on
164 * which bus its connected and call the appropriate write API.
165 */
xilinx_fb_out32(struct xilinxfb_drvdata * drvdata,u32 offset,u32 val)166 static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset,
167 u32 val)
168 {
169 if (drvdata->flags & BUS_ACCESS_FLAG) {
170 if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
171 iowrite32(val, drvdata->regs + (offset << 2));
172 else
173 iowrite32be(val, drvdata->regs + (offset << 2));
174 }
175 #ifdef CONFIG_PPC_DCR
176 else
177 dcr_write(drvdata->dcr_host, offset, val);
178 #endif
179 }
180
xilinx_fb_in32(struct xilinxfb_drvdata * drvdata,u32 offset)181 static u32 xilinx_fb_in32(struct xilinxfb_drvdata *drvdata, u32 offset)
182 {
183 if (drvdata->flags & BUS_ACCESS_FLAG) {
184 if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
185 return ioread32(drvdata->regs + (offset << 2));
186 else
187 return ioread32be(drvdata->regs + (offset << 2));
188 }
189 #ifdef CONFIG_PPC_DCR
190 else
191 return dcr_read(drvdata->dcr_host, offset);
192 #endif
193 return 0;
194 }
195
196 static int
xilinx_fb_setcolreg(unsigned int regno,unsigned int red,unsigned int green,unsigned int blue,unsigned int transp,struct fb_info * fbi)197 xilinx_fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
198 unsigned int blue, unsigned int transp, struct fb_info *fbi)
199 {
200 u32 *palette = fbi->pseudo_palette;
201
202 if (regno >= PALETTE_ENTRIES_NO)
203 return -EINVAL;
204
205 if (fbi->var.grayscale) {
206 /* Convert color to grayscale.
207 * grayscale = 0.30*R + 0.59*G + 0.11*B
208 */
209 blue = (red * 77 + green * 151 + blue * 28 + 127) >> 8;
210 green = blue;
211 red = green;
212 }
213
214 /* fbi->fix.visual is always FB_VISUAL_TRUECOLOR */
215
216 /* We only handle 8 bits of each color. */
217 red >>= 8;
218 green >>= 8;
219 blue >>= 8;
220 palette[regno] = (red << RED_SHIFT) | (green << GREEN_SHIFT) |
221 (blue << BLUE_SHIFT);
222
223 return 0;
224 }
225
226 static int
xilinx_fb_blank(int blank_mode,struct fb_info * fbi)227 xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
228 {
229 struct xilinxfb_drvdata *drvdata = to_xilinxfb_drvdata(fbi);
230
231 switch (blank_mode) {
232 case FB_BLANK_UNBLANK:
233 /* turn on panel */
234 xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
235 break;
236
237 case FB_BLANK_NORMAL:
238 case FB_BLANK_VSYNC_SUSPEND:
239 case FB_BLANK_HSYNC_SUSPEND:
240 case FB_BLANK_POWERDOWN:
241 /* turn off panel */
242 xilinx_fb_out32(drvdata, REG_CTRL, 0);
243 break;
244
245 default:
246 break;
247 }
248 return 0; /* success */
249 }
250
251 static const struct fb_ops xilinxfb_ops = {
252 .owner = THIS_MODULE,
253 FB_DEFAULT_IOMEM_OPS,
254 .fb_setcolreg = xilinx_fb_setcolreg,
255 .fb_blank = xilinx_fb_blank,
256 };
257
258 /* ---------------------------------------------------------------------
259 * Bus independent setup/teardown
260 */
261
xilinxfb_assign(struct platform_device * pdev,struct xilinxfb_drvdata * drvdata,struct xilinxfb_platform_data * pdata)262 static int xilinxfb_assign(struct platform_device *pdev,
263 struct xilinxfb_drvdata *drvdata,
264 struct xilinxfb_platform_data *pdata)
265 {
266 int rc;
267 struct device *dev = &pdev->dev;
268 int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
269
270 if (drvdata->flags & BUS_ACCESS_FLAG) {
271 struct resource *res;
272
273 drvdata->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
274 if (IS_ERR(drvdata->regs))
275 return PTR_ERR(drvdata->regs);
276
277 drvdata->regs_phys = res->start;
278 }
279
280 /* Allocate the framebuffer memory */
281 if (pdata->fb_phys) {
282 drvdata->fb_phys = pdata->fb_phys;
283 drvdata->fb_virt = ioremap(pdata->fb_phys, fbsize);
284 } else {
285 drvdata->fb_alloced = 1;
286 drvdata->fb_virt = dma_alloc_coherent(dev, PAGE_ALIGN(fbsize),
287 &drvdata->fb_phys,
288 GFP_KERNEL);
289 }
290
291 if (!drvdata->fb_virt) {
292 dev_err(dev, "Could not allocate frame buffer memory\n");
293 return -ENOMEM;
294 }
295
296 /* Clear (turn to black) the framebuffer */
297 memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize);
298
299 /* Tell the hardware where the frame buffer is */
300 xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
301 rc = xilinx_fb_in32(drvdata, REG_FB_ADDR);
302 /* Endianness detection */
303 if (rc != drvdata->fb_phys) {
304 drvdata->flags |= LITTLE_ENDIAN_ACCESS;
305 xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
306 }
307
308 /* Turn on the display */
309 drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
310 if (pdata->rotate_screen)
311 drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
312 xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
313
314 /* Fill struct fb_info */
315 drvdata->info.device = dev;
316 drvdata->info.screen_base = (void __iomem *)drvdata->fb_virt;
317 drvdata->info.fbops = &xilinxfb_ops;
318 drvdata->info.fix = xilinx_fb_fix;
319 drvdata->info.fix.smem_start = drvdata->fb_phys;
320 drvdata->info.fix.smem_len = fbsize;
321 drvdata->info.fix.line_length = pdata->xvirt * BYTES_PER_PIXEL;
322
323 drvdata->info.pseudo_palette = drvdata->pseudo_palette;
324 drvdata->info.var = xilinx_fb_var;
325 drvdata->info.var.height = pdata->screen_height_mm;
326 drvdata->info.var.width = pdata->screen_width_mm;
327 drvdata->info.var.xres = pdata->xres;
328 drvdata->info.var.yres = pdata->yres;
329 drvdata->info.var.xres_virtual = pdata->xvirt;
330 drvdata->info.var.yres_virtual = pdata->yvirt;
331
332 /* Allocate a colour map */
333 rc = fb_alloc_cmap(&drvdata->info.cmap, PALETTE_ENTRIES_NO, 0);
334 if (rc) {
335 dev_err(dev, "Fail to allocate colormap (%d entries)\n",
336 PALETTE_ENTRIES_NO);
337 goto err_cmap;
338 }
339
340 /* Register new frame buffer */
341 rc = register_framebuffer(&drvdata->info);
342 if (rc) {
343 dev_err(dev, "Could not register frame buffer\n");
344 goto err_regfb;
345 }
346
347 if (drvdata->flags & BUS_ACCESS_FLAG) {
348 /* Put a banner in the log (for DEBUG) */
349 dev_dbg(dev, "regs: phys=%pa, virt=%p\n",
350 &drvdata->regs_phys, drvdata->regs);
351 }
352 /* Put a banner in the log (for DEBUG) */
353 dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
354 (unsigned long long)drvdata->fb_phys, drvdata->fb_virt, fbsize);
355
356 return 0; /* success */
357
358 err_regfb:
359 fb_dealloc_cmap(&drvdata->info.cmap);
360
361 err_cmap:
362 if (drvdata->fb_alloced)
363 dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
364 drvdata->fb_phys);
365 else
366 iounmap(drvdata->fb_virt);
367
368 /* Turn off the display */
369 xilinx_fb_out32(drvdata, REG_CTRL, 0);
370
371 return rc;
372 }
373
xilinxfb_release(struct device * dev)374 static void xilinxfb_release(struct device *dev)
375 {
376 struct xilinxfb_drvdata *drvdata = dev_get_drvdata(dev);
377
378 #if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
379 xilinx_fb_blank(VESA_POWERDOWN, &drvdata->info);
380 #endif
381
382 unregister_framebuffer(&drvdata->info);
383
384 fb_dealloc_cmap(&drvdata->info.cmap);
385
386 if (drvdata->fb_alloced)
387 dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
388 drvdata->fb_virt, drvdata->fb_phys);
389 else
390 iounmap(drvdata->fb_virt);
391
392 /* Turn off the display */
393 xilinx_fb_out32(drvdata, REG_CTRL, 0);
394
395 #ifdef CONFIG_PPC_DCR
396 /* Release the resources, as allocated based on interface */
397 if (!(drvdata->flags & BUS_ACCESS_FLAG))
398 dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
399 #endif
400 }
401
402 /* ---------------------------------------------------------------------
403 * OF bus binding
404 */
405
xilinxfb_of_probe(struct platform_device * pdev)406 static int xilinxfb_of_probe(struct platform_device *pdev)
407 {
408 const u32 *prop;
409 u32 tft_access = 0;
410 struct xilinxfb_platform_data pdata;
411 int size;
412 struct xilinxfb_drvdata *drvdata;
413
414 /* Copy with the default pdata (not a ptr reference!) */
415 pdata = xilinx_fb_default_pdata;
416
417 /* Allocate the driver data region */
418 drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
419 if (!drvdata)
420 return -ENOMEM;
421
422 /*
423 * To check whether the core is connected directly to DCR or BUS
424 * interface and initialize the tft_access accordingly.
425 */
426 of_property_read_u32(pdev->dev.of_node, "xlnx,dcr-splb-slave-if",
427 &tft_access);
428
429 /*
430 * Fill the resource structure if its direct BUS interface
431 * otherwise fill the dcr_host structure.
432 */
433 if (tft_access)
434 drvdata->flags |= BUS_ACCESS_FLAG;
435 #ifdef CONFIG_PPC_DCR
436 else {
437 int start;
438
439 start = dcr_resource_start(pdev->dev.of_node, 0);
440 drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
441 drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
442 if (!DCR_MAP_OK(drvdata->dcr_host)) {
443 dev_err(&pdev->dev, "invalid DCR address\n");
444 return -ENODEV;
445 }
446 }
447 #endif
448
449 prop = of_get_property(pdev->dev.of_node, "phys-size", &size);
450 if ((prop) && (size >= sizeof(u32) * 2)) {
451 pdata.screen_width_mm = prop[0];
452 pdata.screen_height_mm = prop[1];
453 }
454
455 prop = of_get_property(pdev->dev.of_node, "resolution", &size);
456 if ((prop) && (size >= sizeof(u32) * 2)) {
457 pdata.xres = prop[0];
458 pdata.yres = prop[1];
459 }
460
461 prop = of_get_property(pdev->dev.of_node, "virtual-resolution", &size);
462 if ((prop) && (size >= sizeof(u32) * 2)) {
463 pdata.xvirt = prop[0];
464 pdata.yvirt = prop[1];
465 }
466
467 pdata.rotate_screen = of_property_read_bool(pdev->dev.of_node, "rotate-display");
468
469 platform_set_drvdata(pdev, drvdata);
470 return xilinxfb_assign(pdev, drvdata, &pdata);
471 }
472
xilinxfb_of_remove(struct platform_device * op)473 static void xilinxfb_of_remove(struct platform_device *op)
474 {
475 xilinxfb_release(&op->dev);
476 }
477
478 /* Match table for of_platform binding */
479 static const struct of_device_id xilinxfb_of_match[] = {
480 { .compatible = "xlnx,xps-tft-1.00.a", },
481 { .compatible = "xlnx,xps-tft-2.00.a", },
482 { .compatible = "xlnx,xps-tft-2.01.a", },
483 { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
484 { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
485 {},
486 };
487 MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
488
489 static struct platform_driver xilinxfb_of_driver = {
490 .probe = xilinxfb_of_probe,
491 .remove_new = xilinxfb_of_remove,
492 .driver = {
493 .name = DRIVER_NAME,
494 .of_match_table = xilinxfb_of_match,
495 },
496 };
497
498 module_platform_driver(xilinxfb_of_driver);
499
500 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
501 MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
502 MODULE_LICENSE("GPL");
503