1 /* 2 * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. 3 * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. 4 * Copyright 2009 Jonathan Corbet <corbet@lwn.net> 5 */ 6 7 /* 8 * Core code for the Via multifunction framebuffer device. 9 */ 10 #include <linux/via-core.h> 11 #include <linux/via_i2c.h> 12 #include <linux/via-gpio.h> 13 #include "global.h" 14 15 #include <linux/module.h> 16 #include <linux/interrupt.h> 17 #include <linux/platform_device.h> 18 #include <linux/list.h> 19 #include <linux/pm.h> 20 #include <asm/olpc.h> 21 22 /* 23 * The default port config. 24 */ 25 static struct via_port_cfg adap_configs[] = { 26 [VIA_PORT_26] = { VIA_PORT_I2C, VIA_MODE_I2C, VIASR, 0x26 }, 27 [VIA_PORT_31] = { VIA_PORT_I2C, VIA_MODE_I2C, VIASR, 0x31 }, 28 [VIA_PORT_25] = { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x25 }, 29 [VIA_PORT_2C] = { VIA_PORT_GPIO, VIA_MODE_I2C, VIASR, 0x2c }, 30 [VIA_PORT_3D] = { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x3d }, 31 { 0, 0, 0, 0 } 32 }; 33 34 /* 35 * The OLPC XO-1.5 puts the camera power and reset lines onto 36 * GPIO 2C. 37 */ 38 static struct via_port_cfg olpc_adap_configs[] = { 39 [VIA_PORT_26] = { VIA_PORT_I2C, VIA_MODE_I2C, VIASR, 0x26 }, 40 [VIA_PORT_31] = { VIA_PORT_I2C, VIA_MODE_I2C, VIASR, 0x31 }, 41 [VIA_PORT_25] = { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x25 }, 42 [VIA_PORT_2C] = { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x2c }, 43 [VIA_PORT_3D] = { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x3d }, 44 { 0, 0, 0, 0 } 45 }; 46 47 /* 48 * We currently only support one viafb device (will there ever be 49 * more than one?), so just declare it globally here. 50 */ 51 static struct viafb_dev global_dev; 52 53 54 /* 55 * Basic register access; spinlock required. 56 */ 57 static inline void viafb_mmio_write(int reg, u32 v) 58 { 59 iowrite32(v, global_dev.engine_mmio + reg); 60 } 61 62 static inline int viafb_mmio_read(int reg) 63 { 64 return ioread32(global_dev.engine_mmio + reg); 65 } 66 67 /* ---------------------------------------------------------------------- */ 68 /* 69 * Interrupt management. We have a single IRQ line for a lot of 70 * different functions, so we need to share it. The design here 71 * is that we don't want to reimplement the shared IRQ code here; 72 * we also want to avoid having contention for a single handler thread. 73 * So each subdev driver which needs interrupts just requests 74 * them directly from the kernel. We just have what's needed for 75 * overall access to the interrupt control register. 76 */ 77 78 /* 79 * Which interrupts are enabled now? 80 */ 81 static u32 viafb_enabled_ints; 82 83 static void viafb_int_init(void) 84 { 85 viafb_enabled_ints = 0; 86 87 viafb_mmio_write(VDE_INTERRUPT, 0); 88 } 89 90 /* 91 * Allow subdevs to ask for specific interrupts to be enabled. These 92 * functions must be called with reg_lock held 93 */ 94 void viafb_irq_enable(u32 mask) 95 { 96 viafb_enabled_ints |= mask; 97 viafb_mmio_write(VDE_INTERRUPT, viafb_enabled_ints | VDE_I_ENABLE); 98 } 99 EXPORT_SYMBOL_GPL(viafb_irq_enable); 100 101 void viafb_irq_disable(u32 mask) 102 { 103 viafb_enabled_ints &= ~mask; 104 if (viafb_enabled_ints == 0) 105 viafb_mmio_write(VDE_INTERRUPT, 0); /* Disable entirely */ 106 else 107 viafb_mmio_write(VDE_INTERRUPT, 108 viafb_enabled_ints | VDE_I_ENABLE); 109 } 110 EXPORT_SYMBOL_GPL(viafb_irq_disable); 111 112 /* ---------------------------------------------------------------------- */ 113 /* 114 * Currently, the camera driver is the only user of the DMA code, so we 115 * only compile it in if the camera driver is being built. Chances are, 116 * most viafb systems will not need to have this extra code for a while. 117 * As soon as another user comes long, the ifdef can be removed. 118 */ 119 #if IS_ENABLED(CONFIG_VIDEO_VIA_CAMERA) 120 /* 121 * Access to the DMA engine. This currently provides what the camera 122 * driver needs (i.e. outgoing only) but is easily expandable if need 123 * be. 124 */ 125 126 /* 127 * There are four DMA channels in the vx855. For now, we only 128 * use one of them, though. Most of the time, the DMA channel 129 * will be idle, so we keep the IRQ handler unregistered except 130 * when some subsystem has indicated an interest. 131 */ 132 static int viafb_dma_users; 133 static DECLARE_COMPLETION(viafb_dma_completion); 134 /* 135 * This mutex protects viafb_dma_users and our global interrupt 136 * registration state; it also serializes access to the DMA 137 * engine. 138 */ 139 static DEFINE_MUTEX(viafb_dma_lock); 140 141 /* 142 * The VX855 DMA descriptor (used for s/g transfers) looks 143 * like this. 144 */ 145 struct viafb_vx855_dma_descr { 146 u32 addr_low; /* Low part of phys addr */ 147 u32 addr_high; /* High 12 bits of addr */ 148 u32 fb_offset; /* Offset into FB memory */ 149 u32 seg_size; /* Size, 16-byte units */ 150 u32 tile_mode; /* "tile mode" setting */ 151 u32 next_desc_low; /* Next descriptor addr */ 152 u32 next_desc_high; 153 u32 pad; /* Fill out to 64 bytes */ 154 }; 155 156 /* 157 * Flags added to the "next descriptor low" pointers 158 */ 159 #define VIAFB_DMA_MAGIC 0x01 /* ??? Just has to be there */ 160 #define VIAFB_DMA_FINAL_SEGMENT 0x02 /* Final segment */ 161 162 /* 163 * The completion IRQ handler. 164 */ 165 static irqreturn_t viafb_dma_irq(int irq, void *data) 166 { 167 int csr; 168 irqreturn_t ret = IRQ_NONE; 169 170 spin_lock(&global_dev.reg_lock); 171 csr = viafb_mmio_read(VDMA_CSR0); 172 if (csr & VDMA_C_DONE) { 173 viafb_mmio_write(VDMA_CSR0, VDMA_C_DONE); 174 complete(&viafb_dma_completion); 175 ret = IRQ_HANDLED; 176 } 177 spin_unlock(&global_dev.reg_lock); 178 return ret; 179 } 180 181 /* 182 * Indicate a need for DMA functionality. 183 */ 184 int viafb_request_dma(void) 185 { 186 int ret = 0; 187 188 /* 189 * Only VX855 is supported currently. 190 */ 191 if (global_dev.chip_type != UNICHROME_VX855) 192 return -ENODEV; 193 /* 194 * Note the new user and set up our interrupt handler 195 * if need be. 196 */ 197 mutex_lock(&viafb_dma_lock); 198 viafb_dma_users++; 199 if (viafb_dma_users == 1) { 200 ret = request_irq(global_dev.pdev->irq, viafb_dma_irq, 201 IRQF_SHARED, "via-dma", &viafb_dma_users); 202 if (ret) 203 viafb_dma_users--; 204 else 205 viafb_irq_enable(VDE_I_DMA0TDEN); 206 } 207 mutex_unlock(&viafb_dma_lock); 208 return ret; 209 } 210 EXPORT_SYMBOL_GPL(viafb_request_dma); 211 212 void viafb_release_dma(void) 213 { 214 mutex_lock(&viafb_dma_lock); 215 viafb_dma_users--; 216 if (viafb_dma_users == 0) { 217 viafb_irq_disable(VDE_I_DMA0TDEN); 218 free_irq(global_dev.pdev->irq, &viafb_dma_users); 219 } 220 mutex_unlock(&viafb_dma_lock); 221 } 222 EXPORT_SYMBOL_GPL(viafb_release_dma); 223 224 225 #if 0 226 /* 227 * Copy a single buffer from FB memory, synchronously. This code works 228 * but is not currently used. 229 */ 230 void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len) 231 { 232 unsigned long flags; 233 int csr; 234 235 mutex_lock(&viafb_dma_lock); 236 init_completion(&viafb_dma_completion); 237 /* 238 * Program the controller. 239 */ 240 spin_lock_irqsave(&global_dev.reg_lock, flags); 241 viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_DONE); 242 /* Enable ints; must happen after CSR0 write! */ 243 viafb_mmio_write(VDMA_MR0, VDMA_MR_TDIE); 244 viafb_mmio_write(VDMA_MARL0, (int) (paddr & 0xfffffff0)); 245 viafb_mmio_write(VDMA_MARH0, (int) ((paddr >> 28) & 0xfff)); 246 /* Data sheet suggests DAR0 should be <<4, but it lies */ 247 viafb_mmio_write(VDMA_DAR0, offset); 248 viafb_mmio_write(VDMA_DQWCR0, len >> 4); 249 viafb_mmio_write(VDMA_TMR0, 0); 250 viafb_mmio_write(VDMA_DPRL0, 0); 251 viafb_mmio_write(VDMA_DPRH0, 0); 252 viafb_mmio_write(VDMA_PMR0, 0); 253 csr = viafb_mmio_read(VDMA_CSR0); 254 viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_START); 255 spin_unlock_irqrestore(&global_dev.reg_lock, flags); 256 /* 257 * Now we just wait until the interrupt handler says 258 * we're done. 259 */ 260 wait_for_completion_interruptible(&viafb_dma_completion); 261 viafb_mmio_write(VDMA_MR0, 0); /* Reset int enable */ 262 mutex_unlock(&viafb_dma_lock); 263 } 264 EXPORT_SYMBOL_GPL(viafb_dma_copy_out); 265 #endif 266 267 /* 268 * Do a scatter/gather DMA copy from FB memory. You must have done 269 * a successful call to viafb_request_dma() first. 270 */ 271 int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg) 272 { 273 struct viafb_vx855_dma_descr *descr; 274 void *descrpages; 275 dma_addr_t descr_handle; 276 unsigned long flags; 277 int i; 278 struct scatterlist *sgentry; 279 dma_addr_t nextdesc; 280 281 /* 282 * Get a place to put the descriptors. 283 */ 284 descrpages = dma_alloc_coherent(&global_dev.pdev->dev, 285 nsg*sizeof(struct viafb_vx855_dma_descr), 286 &descr_handle, GFP_KERNEL); 287 if (descrpages == NULL) { 288 dev_err(&global_dev.pdev->dev, "Unable to get descr page.\n"); 289 return -ENOMEM; 290 } 291 mutex_lock(&viafb_dma_lock); 292 /* 293 * Fill them in. 294 */ 295 descr = descrpages; 296 nextdesc = descr_handle + sizeof(struct viafb_vx855_dma_descr); 297 for_each_sg(sg, sgentry, nsg, i) { 298 dma_addr_t paddr = sg_dma_address(sgentry); 299 descr->addr_low = paddr & 0xfffffff0; 300 descr->addr_high = ((u64) paddr >> 32) & 0x0fff; 301 descr->fb_offset = offset; 302 descr->seg_size = sg_dma_len(sgentry) >> 4; 303 descr->tile_mode = 0; 304 descr->next_desc_low = (nextdesc&0xfffffff0) | VIAFB_DMA_MAGIC; 305 descr->next_desc_high = ((u64) nextdesc >> 32) & 0x0fff; 306 descr->pad = 0xffffffff; /* VIA driver does this */ 307 offset += sg_dma_len(sgentry); 308 nextdesc += sizeof(struct viafb_vx855_dma_descr); 309 descr++; 310 } 311 descr[-1].next_desc_low = VIAFB_DMA_FINAL_SEGMENT|VIAFB_DMA_MAGIC; 312 /* 313 * Program the engine. 314 */ 315 spin_lock_irqsave(&global_dev.reg_lock, flags); 316 init_completion(&viafb_dma_completion); 317 viafb_mmio_write(VDMA_DQWCR0, 0); 318 viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_DONE); 319 viafb_mmio_write(VDMA_MR0, VDMA_MR_TDIE | VDMA_MR_CHAIN); 320 viafb_mmio_write(VDMA_DPRL0, descr_handle | VIAFB_DMA_MAGIC); 321 viafb_mmio_write(VDMA_DPRH0, 322 (((u64)descr_handle >> 32) & 0x0fff) | 0xf0000); 323 (void) viafb_mmio_read(VDMA_CSR0); 324 viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_START); 325 spin_unlock_irqrestore(&global_dev.reg_lock, flags); 326 /* 327 * Now we just wait until the interrupt handler says 328 * we're done. Except that, actually, we need to wait a little 329 * longer: the interrupts seem to jump the gun a little and we 330 * get corrupted frames sometimes. 331 */ 332 wait_for_completion_timeout(&viafb_dma_completion, 1); 333 msleep(1); 334 if ((viafb_mmio_read(VDMA_CSR0)&VDMA_C_DONE) == 0) 335 printk(KERN_ERR "VIA DMA timeout!\n"); 336 /* 337 * Clean up and we're done. 338 */ 339 viafb_mmio_write(VDMA_CSR0, VDMA_C_DONE); 340 viafb_mmio_write(VDMA_MR0, 0); /* Reset int enable */ 341 mutex_unlock(&viafb_dma_lock); 342 dma_free_coherent(&global_dev.pdev->dev, 343 nsg*sizeof(struct viafb_vx855_dma_descr), descrpages, 344 descr_handle); 345 return 0; 346 } 347 EXPORT_SYMBOL_GPL(viafb_dma_copy_out_sg); 348 #endif /* CONFIG_VIDEO_VIA_CAMERA */ 349 350 /* ---------------------------------------------------------------------- */ 351 /* 352 * Figure out how big our framebuffer memory is. Kind of ugly, 353 * but evidently we can't trust the information found in the 354 * fbdev configuration area. 355 */ 356 static u16 via_function3[] = { 357 CLE266_FUNCTION3, KM400_FUNCTION3, CN400_FUNCTION3, CN700_FUNCTION3, 358 CX700_FUNCTION3, KM800_FUNCTION3, KM890_FUNCTION3, P4M890_FUNCTION3, 359 P4M900_FUNCTION3, VX800_FUNCTION3, VX855_FUNCTION3, VX900_FUNCTION3, 360 }; 361 362 /* Get the BIOS-configured framebuffer size from PCI configuration space 363 * of function 3 in the respective chipset */ 364 static int viafb_get_fb_size_from_pci(int chip_type) 365 { 366 int i; 367 u8 offset = 0; 368 u32 FBSize; 369 u32 VideoMemSize; 370 371 /* search for the "FUNCTION3" device in this chipset */ 372 for (i = 0; i < ARRAY_SIZE(via_function3); i++) { 373 struct pci_dev *pdev; 374 375 pdev = pci_get_device(PCI_VENDOR_ID_VIA, via_function3[i], 376 NULL); 377 if (!pdev) 378 continue; 379 380 DEBUG_MSG(KERN_INFO "Device ID = %x\n", pdev->device); 381 382 switch (pdev->device) { 383 case CLE266_FUNCTION3: 384 case KM400_FUNCTION3: 385 offset = 0xE0; 386 break; 387 case CN400_FUNCTION3: 388 case CN700_FUNCTION3: 389 case CX700_FUNCTION3: 390 case KM800_FUNCTION3: 391 case KM890_FUNCTION3: 392 case P4M890_FUNCTION3: 393 case P4M900_FUNCTION3: 394 case VX800_FUNCTION3: 395 case VX855_FUNCTION3: 396 case VX900_FUNCTION3: 397 /*case CN750_FUNCTION3: */ 398 offset = 0xA0; 399 break; 400 } 401 402 if (!offset) 403 break; 404 405 pci_read_config_dword(pdev, offset, &FBSize); 406 pci_dev_put(pdev); 407 } 408 409 if (!offset) { 410 printk(KERN_ERR "cannot determine framebuffer size\n"); 411 return -EIO; 412 } 413 414 FBSize = FBSize & 0x00007000; 415 DEBUG_MSG(KERN_INFO "FB Size = %x\n", FBSize); 416 417 if (chip_type < UNICHROME_CX700) { 418 switch (FBSize) { 419 case 0x00004000: 420 VideoMemSize = (16 << 20); /*16M */ 421 break; 422 423 case 0x00005000: 424 VideoMemSize = (32 << 20); /*32M */ 425 break; 426 427 case 0x00006000: 428 VideoMemSize = (64 << 20); /*64M */ 429 break; 430 431 default: 432 VideoMemSize = (32 << 20); /*32M */ 433 break; 434 } 435 } else { 436 switch (FBSize) { 437 case 0x00001000: 438 VideoMemSize = (8 << 20); /*8M */ 439 break; 440 441 case 0x00002000: 442 VideoMemSize = (16 << 20); /*16M */ 443 break; 444 445 case 0x00003000: 446 VideoMemSize = (32 << 20); /*32M */ 447 break; 448 449 case 0x00004000: 450 VideoMemSize = (64 << 20); /*64M */ 451 break; 452 453 case 0x00005000: 454 VideoMemSize = (128 << 20); /*128M */ 455 break; 456 457 case 0x00006000: 458 VideoMemSize = (256 << 20); /*256M */ 459 break; 460 461 case 0x00007000: /* Only on VX855/875 */ 462 VideoMemSize = (512 << 20); /*512M */ 463 break; 464 465 default: 466 VideoMemSize = (32 << 20); /*32M */ 467 break; 468 } 469 } 470 471 return VideoMemSize; 472 } 473 474 475 /* 476 * Figure out and map our MMIO regions. 477 */ 478 static int via_pci_setup_mmio(struct viafb_dev *vdev) 479 { 480 int ret; 481 /* 482 * Hook up to the device registers. Note that we soldier 483 * on if it fails; the framebuffer can operate (without 484 * acceleration) without this region. 485 */ 486 vdev->engine_start = pci_resource_start(vdev->pdev, 1); 487 vdev->engine_len = pci_resource_len(vdev->pdev, 1); 488 vdev->engine_mmio = ioremap_nocache(vdev->engine_start, 489 vdev->engine_len); 490 if (vdev->engine_mmio == NULL) 491 dev_err(&vdev->pdev->dev, 492 "Unable to map engine MMIO; operation will be " 493 "slow and crippled.\n"); 494 /* 495 * Map in framebuffer memory. For now, failure here is 496 * fatal. Unfortunately, in the absence of significant 497 * vmalloc space, failure here is also entirely plausible. 498 * Eventually we want to move away from mapping this 499 * entire region. 500 */ 501 if (vdev->chip_type == UNICHROME_VX900) 502 vdev->fbmem_start = pci_resource_start(vdev->pdev, 2); 503 else 504 vdev->fbmem_start = pci_resource_start(vdev->pdev, 0); 505 ret = vdev->fbmem_len = viafb_get_fb_size_from_pci(vdev->chip_type); 506 if (ret < 0) 507 goto out_unmap; 508 509 /* try to map less memory on failure, 8 MB should be still enough */ 510 for (; vdev->fbmem_len >= 8 << 20; vdev->fbmem_len /= 2) { 511 vdev->fbmem = ioremap_wc(vdev->fbmem_start, vdev->fbmem_len); 512 if (vdev->fbmem) 513 break; 514 } 515 516 if (vdev->fbmem == NULL) { 517 ret = -ENOMEM; 518 goto out_unmap; 519 } 520 return 0; 521 out_unmap: 522 iounmap(vdev->engine_mmio); 523 return ret; 524 } 525 526 static void via_pci_teardown_mmio(struct viafb_dev *vdev) 527 { 528 iounmap(vdev->fbmem); 529 iounmap(vdev->engine_mmio); 530 } 531 532 /* 533 * Create our subsidiary devices. 534 */ 535 static struct viafb_subdev_info { 536 char *name; 537 struct platform_device *platdev; 538 } viafb_subdevs[] = { 539 { 540 .name = "viafb-gpio", 541 }, 542 { 543 .name = "viafb-i2c", 544 }, 545 #if IS_ENABLED(CONFIG_VIDEO_VIA_CAMERA) 546 { 547 .name = "viafb-camera", 548 }, 549 #endif 550 }; 551 #define N_SUBDEVS ARRAY_SIZE(viafb_subdevs) 552 553 static int via_create_subdev(struct viafb_dev *vdev, 554 struct viafb_subdev_info *info) 555 { 556 int ret; 557 558 info->platdev = platform_device_alloc(info->name, -1); 559 if (!info->platdev) { 560 dev_err(&vdev->pdev->dev, "Unable to allocate pdev %s\n", 561 info->name); 562 return -ENOMEM; 563 } 564 info->platdev->dev.parent = &vdev->pdev->dev; 565 info->platdev->dev.platform_data = vdev; 566 ret = platform_device_add(info->platdev); 567 if (ret) { 568 dev_err(&vdev->pdev->dev, "Unable to add pdev %s\n", 569 info->name); 570 platform_device_put(info->platdev); 571 info->platdev = NULL; 572 } 573 return ret; 574 } 575 576 static int via_setup_subdevs(struct viafb_dev *vdev) 577 { 578 int i; 579 580 /* 581 * Ignore return values. Even if some of the devices 582 * fail to be created, we'll still be able to use some 583 * of the rest. 584 */ 585 for (i = 0; i < N_SUBDEVS; i++) 586 via_create_subdev(vdev, viafb_subdevs + i); 587 return 0; 588 } 589 590 static void via_teardown_subdevs(void) 591 { 592 int i; 593 594 for (i = 0; i < N_SUBDEVS; i++) 595 if (viafb_subdevs[i].platdev) { 596 viafb_subdevs[i].platdev->dev.platform_data = NULL; 597 platform_device_unregister(viafb_subdevs[i].platdev); 598 } 599 } 600 601 /* 602 * Power management functions 603 */ 604 #ifdef CONFIG_PM 605 static LIST_HEAD(viafb_pm_hooks); 606 static DEFINE_MUTEX(viafb_pm_hooks_lock); 607 608 void viafb_pm_register(struct viafb_pm_hooks *hooks) 609 { 610 INIT_LIST_HEAD(&hooks->list); 611 612 mutex_lock(&viafb_pm_hooks_lock); 613 list_add_tail(&hooks->list, &viafb_pm_hooks); 614 mutex_unlock(&viafb_pm_hooks_lock); 615 } 616 EXPORT_SYMBOL_GPL(viafb_pm_register); 617 618 void viafb_pm_unregister(struct viafb_pm_hooks *hooks) 619 { 620 mutex_lock(&viafb_pm_hooks_lock); 621 list_del(&hooks->list); 622 mutex_unlock(&viafb_pm_hooks_lock); 623 } 624 EXPORT_SYMBOL_GPL(viafb_pm_unregister); 625 626 static int via_suspend(struct pci_dev *pdev, pm_message_t state) 627 { 628 struct viafb_pm_hooks *hooks; 629 630 if (state.event != PM_EVENT_SUSPEND) 631 return 0; 632 /* 633 * "I've occasionally hit a few drivers that caused suspend 634 * failures, and each and every time it was a driver bug, and 635 * the right thing to do was to just ignore the error and suspend 636 * anyway - returning an error code and trying to undo the suspend 637 * is not what anybody ever really wants, even if our model 638 *_allows_ for it." 639 * -- Linus Torvalds, Dec. 7, 2009 640 */ 641 mutex_lock(&viafb_pm_hooks_lock); 642 list_for_each_entry_reverse(hooks, &viafb_pm_hooks, list) 643 hooks->suspend(hooks->private); 644 mutex_unlock(&viafb_pm_hooks_lock); 645 646 pci_save_state(pdev); 647 pci_disable_device(pdev); 648 pci_set_power_state(pdev, pci_choose_state(pdev, state)); 649 return 0; 650 } 651 652 static int via_resume(struct pci_dev *pdev) 653 { 654 struct viafb_pm_hooks *hooks; 655 656 /* Get the bus side powered up */ 657 pci_set_power_state(pdev, PCI_D0); 658 pci_restore_state(pdev); 659 if (pci_enable_device(pdev)) 660 return 0; 661 662 pci_set_master(pdev); 663 664 /* Now bring back any subdevs */ 665 mutex_lock(&viafb_pm_hooks_lock); 666 list_for_each_entry(hooks, &viafb_pm_hooks, list) 667 hooks->resume(hooks->private); 668 mutex_unlock(&viafb_pm_hooks_lock); 669 670 return 0; 671 } 672 #endif /* CONFIG_PM */ 673 674 static int via_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 675 { 676 int ret; 677 678 ret = pci_enable_device(pdev); 679 if (ret) 680 return ret; 681 682 /* 683 * Global device initialization. 684 */ 685 memset(&global_dev, 0, sizeof(global_dev)); 686 global_dev.pdev = pdev; 687 global_dev.chip_type = ent->driver_data; 688 global_dev.port_cfg = adap_configs; 689 if (machine_is_olpc()) 690 global_dev.port_cfg = olpc_adap_configs; 691 692 spin_lock_init(&global_dev.reg_lock); 693 ret = via_pci_setup_mmio(&global_dev); 694 if (ret) 695 goto out_disable; 696 /* 697 * Set up interrupts and create our subdevices. Continue even if 698 * some things fail. 699 */ 700 viafb_int_init(); 701 via_setup_subdevs(&global_dev); 702 /* 703 * Set up the framebuffer device 704 */ 705 ret = via_fb_pci_probe(&global_dev); 706 if (ret) 707 goto out_subdevs; 708 return 0; 709 710 out_subdevs: 711 via_teardown_subdevs(); 712 via_pci_teardown_mmio(&global_dev); 713 out_disable: 714 pci_disable_device(pdev); 715 return ret; 716 } 717 718 static void via_pci_remove(struct pci_dev *pdev) 719 { 720 via_teardown_subdevs(); 721 via_fb_pci_remove(pdev); 722 via_pci_teardown_mmio(&global_dev); 723 pci_disable_device(pdev); 724 } 725 726 727 static const struct pci_device_id via_pci_table[] = { 728 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CLE266_DID), 729 .driver_data = UNICHROME_CLE266 }, 730 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K400_DID), 731 .driver_data = UNICHROME_K400 }, 732 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K800_DID), 733 .driver_data = UNICHROME_K800 }, 734 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID), 735 .driver_data = UNICHROME_PM800 }, 736 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN700_DID), 737 .driver_data = UNICHROME_CN700 }, 738 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CX700_DID), 739 .driver_data = UNICHROME_CX700 }, 740 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN750_DID), 741 .driver_data = UNICHROME_CN750 }, 742 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID), 743 .driver_data = UNICHROME_K8M890 }, 744 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID), 745 .driver_data = UNICHROME_P4M890 }, 746 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID), 747 .driver_data = UNICHROME_P4M900 }, 748 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX800_DID), 749 .driver_data = UNICHROME_VX800 }, 750 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID), 751 .driver_data = UNICHROME_VX855 }, 752 { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX900_DID), 753 .driver_data = UNICHROME_VX900 }, 754 { } 755 }; 756 MODULE_DEVICE_TABLE(pci, via_pci_table); 757 758 static struct pci_driver via_driver = { 759 .name = "viafb", 760 .id_table = via_pci_table, 761 .probe = via_pci_probe, 762 .remove = via_pci_remove, 763 #ifdef CONFIG_PM 764 .suspend = via_suspend, 765 .resume = via_resume, 766 #endif 767 }; 768 769 static int __init via_core_init(void) 770 { 771 int ret; 772 773 ret = viafb_init(); 774 if (ret) 775 return ret; 776 viafb_i2c_init(); 777 viafb_gpio_init(); 778 return pci_register_driver(&via_driver); 779 } 780 781 static void __exit via_core_exit(void) 782 { 783 pci_unregister_driver(&via_driver); 784 viafb_gpio_exit(); 785 viafb_i2c_exit(); 786 viafb_exit(); 787 } 788 789 module_init(via_core_init); 790 module_exit(via_core_exit); 791