1 /* 2 * linux/drivers/video/sstfb.c -- voodoo graphics frame buffer 3 * 4 * Copyright (c) 2000-2002 Ghozlane Toumi <gtoumi@laposte.net> 5 * 6 * Created 15 Jan 2000 by Ghozlane Toumi 7 * 8 * Contributions (and many thanks) : 9 * 10 * 03/2001 James Simmons <jsimmons@infradead.org> 11 * 04/2001 Paul Mundt <lethal@chaoticdreams.org> 12 * 05/2001 Urs Ganse <ursg@uni.de> 13 * (initial work on voodoo2 port, interlace) 14 * 09/2002 Helge Deller <deller@gmx.de> 15 * (enable driver on big-endian machines (hppa), ioctl fixes) 16 * 12/2002 Helge Deller <deller@gmx.de> 17 * (port driver to new frambuffer infrastructure) 18 * 01/2003 Helge Deller <deller@gmx.de> 19 * (initial work on fb hardware acceleration for voodoo2) 20 * 08/2006 Alan Cox <alan@redhat.com> 21 * Remove never finished and bogus 24/32bit support 22 * Clean up macro abuse 23 * Minor tidying for format. 24 * 12/2006 Helge Deller <deller@gmx.de> 25 * add /sys/class/graphics/fbX/vgapass sysfs-interface 26 * add module option "mode_option" to set initial screen mode 27 * use fbdev default videomode database 28 * remove debug functions from ioctl 29 */ 30 31 /* 32 * The voodoo1 has the following memory mapped address space: 33 * 0x000000 - 0x3fffff : registers (4MB) 34 * 0x400000 - 0x7fffff : linear frame buffer (4MB) 35 * 0x800000 - 0xffffff : texture memory (8MB) 36 */ 37 38 /* 39 * misc notes, TODOs, toASKs, and deep thoughts 40 41 -TODO: at one time or another test that the mode is acceptable by the monitor 42 -ASK: Can I choose different ordering for the color bitfields (rgba argb ...) 43 which one should i use ? is there any preferred one ? It seems ARGB is 44 the one ... 45 -TODO: in set_var check the validity of timings (hsync vsync)... 46 -TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via 47 a nop command. so it's ok as long as the commands we pass don't go 48 through the fifo. warning: issuing a nop command seems to need pci_fifo 49 -FIXME: in case of failure in the init sequence, be sure we return to a safe 50 state. 51 - FIXME: Use accelerator for 2D scroll 52 -FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20) 53 */ 54 55 /* 56 * debug info 57 * SST_DEBUG : enable debugging 58 * SST_DEBUG_REG : debug registers 59 * 0 : no debug 60 * 1 : dac calls, [un]set_bits, FbiInit 61 * 2 : insane debug level (log every register read/write) 62 * SST_DEBUG_FUNC : functions 63 * 0 : no debug 64 * 1 : function call / debug ioctl 65 * 2 : variables 66 * 3 : flood . you don't want to do that. trust me. 67 * SST_DEBUG_VAR : debug display/var structs 68 * 0 : no debug 69 * 1 : dumps display, fb_var 70 * 71 * sstfb specific ioctls: 72 * toggle vga (0x46db) : toggle vga_pass_through 73 */ 74 75 #undef SST_DEBUG 76 77 78 /* 79 * Includes 80 */ 81 82 #include <linux/string.h> 83 #include <linux/kernel.h> 84 #include <linux/module.h> 85 #include <linux/fb.h> 86 #include <linux/pci.h> 87 #include <linux/delay.h> 88 #include <linux/init.h> 89 #include <asm/io.h> 90 #include <linux/uaccess.h> 91 #include <video/sstfb.h> 92 93 94 /* initialized by setup */ 95 96 static bool vgapass; /* enable VGA passthrough cable */ 97 static int mem; /* mem size in MB, 0 = autodetect */ 98 static bool clipping = 1; /* use clipping (slower, safer) */ 99 static int gfxclk; /* force FBI freq in Mhz . Dangerous */ 100 static bool slowpci; /* slow PCI settings */ 101 102 /* 103 Possible default video modes: 800x600@60, 640x480@75, 1024x768@76, 640x480@60 104 */ 105 #define DEFAULT_VIDEO_MODE "640x480@60" 106 107 static char *mode_option = DEFAULT_VIDEO_MODE; 108 109 enum { 110 ID_VOODOO1 = 0, 111 ID_VOODOO2 = 1, 112 }; 113 114 #define IS_VOODOO2(par) ((par)->type == ID_VOODOO2) 115 116 static struct sst_spec voodoo_spec[] = { 117 { .name = "Voodoo Graphics", .default_gfx_clock = 50000, .max_gfxclk = 60 }, 118 { .name = "Voodoo2", .default_gfx_clock = 75000, .max_gfxclk = 85 }, 119 }; 120 121 122 /* 123 * debug functions 124 */ 125 126 #if (SST_DEBUG_REG > 0) 127 static void sst_dbg_print_read_reg(u32 reg, u32 val) { 128 const char *regname; 129 switch (reg) { 130 case FBIINIT0: regname = "FbiInit0"; break; 131 case FBIINIT1: regname = "FbiInit1"; break; 132 case FBIINIT2: regname = "FbiInit2"; break; 133 case FBIINIT3: regname = "FbiInit3"; break; 134 case FBIINIT4: regname = "FbiInit4"; break; 135 case FBIINIT5: regname = "FbiInit5"; break; 136 case FBIINIT6: regname = "FbiInit6"; break; 137 default: regname = NULL; break; 138 } 139 if (regname == NULL) 140 r_ddprintk("sst_read(%#x): %#x\n", reg, val); 141 else 142 r_dprintk(" sst_read(%s): %#x\n", regname, val); 143 } 144 145 static void sst_dbg_print_write_reg(u32 reg, u32 val) { 146 const char *regname; 147 switch (reg) { 148 case FBIINIT0: regname = "FbiInit0"; break; 149 case FBIINIT1: regname = "FbiInit1"; break; 150 case FBIINIT2: regname = "FbiInit2"; break; 151 case FBIINIT3: regname = "FbiInit3"; break; 152 case FBIINIT4: regname = "FbiInit4"; break; 153 case FBIINIT5: regname = "FbiInit5"; break; 154 case FBIINIT6: regname = "FbiInit6"; break; 155 default: regname = NULL; break; 156 } 157 if (regname == NULL) 158 r_ddprintk("sst_write(%#x, %#x)\n", reg, val); 159 else 160 r_dprintk(" sst_write(%s, %#x)\n", regname, val); 161 } 162 #else /* (SST_DEBUG_REG > 0) */ 163 # define sst_dbg_print_read_reg(reg, val) do {} while(0) 164 # define sst_dbg_print_write_reg(reg, val) do {} while(0) 165 #endif /* (SST_DEBUG_REG > 0) */ 166 167 /* 168 * hardware access functions 169 */ 170 171 /* register access */ 172 #define sst_read(reg) __sst_read(par->mmio_vbase, reg) 173 #define sst_write(reg,val) __sst_write(par->mmio_vbase, reg, val) 174 #define sst_set_bits(reg,val) __sst_set_bits(par->mmio_vbase, reg, val) 175 #define sst_unset_bits(reg,val) __sst_unset_bits(par->mmio_vbase, reg, val) 176 #define sst_dac_read(reg) __sst_dac_read(par->mmio_vbase, reg) 177 #define sst_dac_write(reg,val) __sst_dac_write(par->mmio_vbase, reg, val) 178 #define dac_i_read(reg) __dac_i_read(par->mmio_vbase, reg) 179 #define dac_i_write(reg,val) __dac_i_write(par->mmio_vbase, reg, val) 180 181 static inline u32 __sst_read(u8 __iomem *vbase, u32 reg) 182 { 183 u32 ret = readl(vbase + reg); 184 sst_dbg_print_read_reg(reg, ret); 185 return ret; 186 } 187 188 static inline void __sst_write(u8 __iomem *vbase, u32 reg, u32 val) 189 { 190 sst_dbg_print_write_reg(reg, val); 191 writel(val, vbase + reg); 192 } 193 194 static inline void __sst_set_bits(u8 __iomem *vbase, u32 reg, u32 val) 195 { 196 r_dprintk("sst_set_bits(%#x, %#x)\n", reg, val); 197 __sst_write(vbase, reg, __sst_read(vbase, reg) | val); 198 } 199 200 static inline void __sst_unset_bits(u8 __iomem *vbase, u32 reg, u32 val) 201 { 202 r_dprintk("sst_unset_bits(%#x, %#x)\n", reg, val); 203 __sst_write(vbase, reg, __sst_read(vbase, reg) & ~val); 204 } 205 206 /* 207 * wait for the fbi chip. ASK: what happens if the fbi is stuck ? 208 * 209 * the FBI is supposed to be ready if we receive 5 time 210 * in a row a "idle" answer to our requests 211 */ 212 213 #define sst_wait_idle() __sst_wait_idle(par->mmio_vbase) 214 215 static int __sst_wait_idle(u8 __iomem *vbase) 216 { 217 int count = 0; 218 219 /* if (doFBINOP) __sst_write(vbase, NOPCMD, 0); */ 220 221 while(1) { 222 if (__sst_read(vbase, STATUS) & STATUS_FBI_BUSY) { 223 f_dddprintk("status: busy\n"); 224 /* FIXME basically, this is a busy wait. maybe not that good. oh well; 225 * this is a small loop after all. 226 * Or maybe we should use mdelay() or udelay() here instead ? */ 227 count = 0; 228 } else { 229 count++; 230 f_dddprintk("status: idle(%d)\n", count); 231 } 232 if (count >= 5) return 1; 233 /* XXX do something to avoid hanging the machine if the voodoo is out */ 234 } 235 } 236 237 238 /* dac access */ 239 /* dac_read should be remaped to FbiInit2 (via the pci reg init_enable) */ 240 static u8 __sst_dac_read(u8 __iomem *vbase, u8 reg) 241 { 242 u8 ret; 243 244 reg &= 0x07; 245 __sst_write(vbase, DAC_DATA, ((u32)reg << 8) | DAC_READ_CMD ); 246 __sst_wait_idle(vbase); 247 /* udelay(10); */ 248 ret = __sst_read(vbase, DAC_READ) & 0xff; 249 r_dprintk("sst_dac_read(%#x): %#x\n", reg, ret); 250 251 return ret; 252 } 253 254 static void __sst_dac_write(u8 __iomem *vbase, u8 reg, u8 val) 255 { 256 r_dprintk("sst_dac_write(%#x, %#x)\n", reg, val); 257 reg &= 0x07; 258 __sst_write(vbase, DAC_DATA,(((u32)reg << 8)) | (u32)val); 259 __sst_wait_idle(vbase); 260 } 261 262 /* indexed access to ti/att dacs */ 263 static u32 __dac_i_read(u8 __iomem *vbase, u8 reg) 264 { 265 u32 ret; 266 267 __sst_dac_write(vbase, DACREG_ADDR_I, reg); 268 ret = __sst_dac_read(vbase, DACREG_DATA_I); 269 r_dprintk("sst_dac_read_i(%#x): %#x\n", reg, ret); 270 return ret; 271 } 272 static void __dac_i_write(u8 __iomem *vbase, u8 reg,u8 val) 273 { 274 r_dprintk("sst_dac_write_i(%#x, %#x)\n", reg, val); 275 __sst_dac_write(vbase, DACREG_ADDR_I, reg); 276 __sst_dac_write(vbase, DACREG_DATA_I, val); 277 } 278 279 /* compute the m,n,p , returns the real freq 280 * (ics datasheet : N <-> N1 , P <-> N2) 281 * 282 * Fout= Fref * (M+2)/( 2^P * (N+2)) 283 * we try to get close to the asked freq 284 * with P as high, and M as low as possible 285 * range: 286 * ti/att : 0 <= M <= 255; 0 <= P <= 3; 0<= N <= 63 287 * ics : 1 <= M <= 127; 0 <= P <= 3; 1<= N <= 31 288 * we'll use the lowest limitation, should be precise enouth 289 */ 290 static int sst_calc_pll(const int freq, int *freq_out, struct pll_timing *t) 291 { 292 int m, m2, n, p, best_err, fout; 293 int best_n = -1; 294 int best_m = -1; 295 296 best_err = freq; 297 p = 3; 298 /* f * 2^P = vco should be less than VCOmax ~ 250 MHz for ics*/ 299 while (((1 << p) * freq > VCO_MAX) && (p >= 0)) 300 p--; 301 if (p == -1) 302 return -EINVAL; 303 for (n = 1; n < 32; n++) { 304 /* calc 2 * m so we can round it later*/ 305 m2 = (2 * freq * (1 << p) * (n + 2) ) / DAC_FREF - 4 ; 306 307 m = (m2 % 2 ) ? m2/2+1 : m2/2 ; 308 if (m >= 128) 309 break; 310 fout = (DAC_FREF * (m + 2)) / ((1 << p) * (n + 2)); 311 if ((abs(fout - freq) < best_err) && (m > 0)) { 312 best_n = n; 313 best_m = m; 314 best_err = abs(fout - freq); 315 /* we get the lowest m , allowing 0.5% error in freq*/ 316 if (200*best_err < freq) break; 317 } 318 } 319 if (best_n == -1) /* unlikely, but who knows ? */ 320 return -EINVAL; 321 t->p = p; 322 t->n = best_n; 323 t->m = best_m; 324 *freq_out = (DAC_FREF * (t->m + 2)) / ((1 << t->p) * (t->n + 2)); 325 f_ddprintk ("m: %d, n: %d, p: %d, F: %dKhz\n", 326 t->m, t->n, t->p, *freq_out); 327 return 0; 328 } 329 330 /* 331 * clear lfb screen 332 */ 333 static void sstfb_clear_screen(struct fb_info *info) 334 { 335 /* clear screen */ 336 fb_memset(info->screen_base, 0, info->fix.smem_len); 337 } 338 339 340 /** 341 * sstfb_check_var - Optional function. Validates a var passed in. 342 * @var: frame buffer variable screen structure 343 * @info: frame buffer structure that represents a single frame buffer 344 * 345 * Limit to the abilities of a single chip as SLI is not supported 346 * by this driver. 347 */ 348 349 static int sstfb_check_var(struct fb_var_screeninfo *var, 350 struct fb_info *info) 351 { 352 struct sstfb_par *par = info->par; 353 int hSyncOff = var->xres + var->right_margin + var->left_margin; 354 int vSyncOff = var->yres + var->lower_margin + var->upper_margin; 355 int vBackPorch = var->left_margin, yDim = var->yres; 356 int vSyncOn = var->vsync_len; 357 int tiles_in_X, real_length; 358 unsigned int freq; 359 360 if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) { 361 printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n", 362 PICOS2KHZ(var->pixclock)); 363 return -EINVAL; 364 } 365 var->pixclock = KHZ2PICOS(freq); 366 367 if (var->vmode & FB_VMODE_INTERLACED) 368 vBackPorch += (vBackPorch % 2); 369 if (var->vmode & FB_VMODE_DOUBLE) { 370 vBackPorch <<= 1; 371 yDim <<=1; 372 vSyncOn <<=1; 373 vSyncOff <<=1; 374 } 375 376 switch (var->bits_per_pixel) { 377 case 0 ... 16 : 378 var->bits_per_pixel = 16; 379 break; 380 default : 381 printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel); 382 return -EINVAL; 383 } 384 385 /* validity tests */ 386 if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1 || 387 hSyncOff <= 1 || var->left_margin <= 2 || vSyncOn <= 0 || 388 vSyncOff <= 0 || vBackPorch <= 0) { 389 return -EINVAL; 390 } 391 392 if (IS_VOODOO2(par)) { 393 /* Voodoo 2 limits */ 394 tiles_in_X = (var->xres + 63 ) / 64 * 2; 395 396 if (var->xres > POW2(11) || yDim >= POW2(11)) { 397 printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n", 398 var->xres, var->yres); 399 return -EINVAL; 400 } 401 402 if (var->hsync_len > POW2(9) || hSyncOff > POW2(11) || 403 var->left_margin - 2 >= POW2(9) || vSyncOn >= POW2(13) || 404 vSyncOff >= POW2(13) || vBackPorch >= POW2(9) || 405 tiles_in_X >= POW2(6) || tiles_in_X <= 0) { 406 printk(KERN_ERR "sstfb: Unsupported timings\n"); 407 return -EINVAL; 408 } 409 } else { 410 /* Voodoo limits */ 411 tiles_in_X = (var->xres + 63 ) / 64; 412 413 if (var->vmode) { 414 printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n", 415 var->vmode); 416 return -EINVAL; 417 } 418 if (var->xres > POW2(10) || var->yres >= POW2(10)) { 419 printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n", 420 var->xres, var->yres); 421 return -EINVAL; 422 } 423 if (var->hsync_len > POW2(8) || hSyncOff - 1 > POW2(10) || 424 var->left_margin - 2 >= POW2(8) || vSyncOn >= POW2(12) || 425 vSyncOff >= POW2(12) || vBackPorch >= POW2(8) || 426 tiles_in_X >= POW2(4) || tiles_in_X <= 0) { 427 printk(KERN_ERR "sstfb: Unsupported timings\n"); 428 return -EINVAL; 429 } 430 } 431 432 /* it seems that the fbi uses tiles of 64x16 pixels to "map" the mem */ 433 /* FIXME: i don't like this... looks wrong */ 434 real_length = tiles_in_X * (IS_VOODOO2(par) ? 32 : 64 ) 435 * ((var->bits_per_pixel == 16) ? 2 : 4); 436 437 if (real_length * yDim > info->fix.smem_len) { 438 printk(KERN_ERR "sstfb: Not enough video memory\n"); 439 return -ENOMEM; 440 } 441 442 var->sync &= (FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT); 443 var->vmode &= (FB_VMODE_INTERLACED | FB_VMODE_DOUBLE); 444 var->xoffset = 0; 445 var->yoffset = 0; 446 var->height = -1; 447 var->width = -1; 448 449 /* 450 * correct the color bit fields 451 */ 452 /* var->{red|green|blue}.msb_right = 0; */ 453 454 switch (var->bits_per_pixel) { 455 case 16: /* RGB 565 LfbMode 0 */ 456 var->red.length = 5; 457 var->green.length = 6; 458 var->blue.length = 5; 459 var->transp.length = 0; 460 461 var->red.offset = 11; 462 var->green.offset = 5; 463 var->blue.offset = 0; 464 var->transp.offset = 0; 465 break; 466 default: 467 return -EINVAL; 468 } 469 return 0; 470 } 471 472 /** 473 * sstfb_set_par - Optional function. Alters the hardware state. 474 * @info: frame buffer structure that represents a single frame buffer 475 */ 476 static int sstfb_set_par(struct fb_info *info) 477 { 478 struct sstfb_par *par = info->par; 479 u32 lfbmode, fbiinit1, fbiinit2, fbiinit3, fbiinit5, fbiinit6=0; 480 struct pci_dev *sst_dev = par->dev; 481 unsigned int freq; 482 int ntiles; 483 484 par->hSyncOff = info->var.xres + info->var.right_margin + info->var.left_margin; 485 486 par->yDim = info->var.yres; 487 par->vSyncOn = info->var.vsync_len; 488 par->vSyncOff = info->var.yres + info->var.lower_margin + info->var.upper_margin; 489 par->vBackPorch = info->var.upper_margin; 490 491 /* We need par->pll */ 492 sst_calc_pll(PICOS2KHZ(info->var.pixclock), &freq, &par->pll); 493 494 if (info->var.vmode & FB_VMODE_INTERLACED) 495 par->vBackPorch += (par->vBackPorch % 2); 496 if (info->var.vmode & FB_VMODE_DOUBLE) { 497 par->vBackPorch <<= 1; 498 par->yDim <<=1; 499 par->vSyncOn <<=1; 500 par->vSyncOff <<=1; 501 } 502 503 if (IS_VOODOO2(par)) { 504 /* voodoo2 has 32 pixel wide tiles , BUT strange things 505 happen with odd number of tiles */ 506 par->tiles_in_X = (info->var.xres + 63 ) / 64 * 2; 507 } else { 508 /* voodoo1 has 64 pixels wide tiles. */ 509 par->tiles_in_X = (info->var.xres + 63 ) / 64; 510 } 511 512 f_ddprintk("hsync_len hSyncOff vsync_len vSyncOff\n"); 513 f_ddprintk("%-7d %-8d %-7d %-8d\n", 514 info->var.hsync_len, par->hSyncOff, 515 par->vSyncOn, par->vSyncOff); 516 f_ddprintk("left_margin upper_margin xres yres Freq\n"); 517 f_ddprintk("%-10d %-10d %-4d %-4d %-8ld\n", 518 info->var.left_margin, info->var.upper_margin, 519 info->var.xres, info->var.yres, PICOS2KHZ(info->var.pixclock)); 520 521 sst_write(NOPCMD, 0); 522 sst_wait_idle(); 523 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR); 524 sst_set_bits(FBIINIT1, VIDEO_RESET); 525 sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET); 526 sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH); 527 sst_wait_idle(); 528 529 /*sst_unset_bits (FBIINIT0, FBI_RESET); / reenable FBI ? */ 530 531 sst_write(BACKPORCH, par->vBackPorch << 16 | (info->var.left_margin - 2)); 532 sst_write(VIDEODIMENSIONS, par->yDim << 16 | (info->var.xres - 1)); 533 sst_write(HSYNC, (par->hSyncOff - 1) << 16 | (info->var.hsync_len - 1)); 534 sst_write(VSYNC, par->vSyncOff << 16 | par->vSyncOn); 535 536 fbiinit2 = sst_read(FBIINIT2); 537 fbiinit3 = sst_read(FBIINIT3); 538 539 /* everything is reset. we enable fbiinit2/3 remap : dac access ok */ 540 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, 541 PCI_EN_INIT_WR | PCI_REMAP_DAC ); 542 543 par->dac_sw.set_vidmod(info, info->var.bits_per_pixel); 544 545 /* set video clock */ 546 par->dac_sw.set_pll(info, &par->pll, VID_CLOCK); 547 548 /* disable fbiinit2/3 remap */ 549 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, 550 PCI_EN_INIT_WR); 551 552 /* restore fbiinit2/3 */ 553 sst_write(FBIINIT2,fbiinit2); 554 sst_write(FBIINIT3,fbiinit3); 555 556 fbiinit1 = (sst_read(FBIINIT1) & VIDEO_MASK) 557 | EN_DATA_OE 558 | EN_BLANK_OE 559 | EN_HVSYNC_OE 560 | EN_DCLK_OE 561 /* | (15 << TILES_IN_X_SHIFT) */ 562 | SEL_INPUT_VCLK_2X 563 /* | (2 << VCLK_2X_SEL_DEL_SHIFT) 564 | (2 << VCLK_DEL_SHIFT) */; 565 /* try with vclk_in_delay =0 (bits 29:30) , vclk_out_delay =0 (bits(27:28) 566 in (near) future set them accordingly to revision + resolution (cf glide) 567 first understand what it stands for :) 568 FIXME: there are some artefacts... check for the vclk_in_delay 569 lets try with 6ns delay in both vclk_out & in... 570 doh... they're still there :\ 571 */ 572 573 ntiles = par->tiles_in_X; 574 if (IS_VOODOO2(par)) { 575 fbiinit1 |= ((ntiles & 0x20) >> 5) << TILES_IN_X_MSB_SHIFT 576 | ((ntiles & 0x1e) >> 1) << TILES_IN_X_SHIFT; 577 /* as the only value of importance for us in fbiinit6 is tiles in X (lsb), 578 and as reading fbinit 6 will return crap (see FBIINIT6_DEFAULT) we just 579 write our value. BTW due to the dac unable to read odd number of tiles, this 580 field is always null ... */ 581 fbiinit6 = (ntiles & 0x1) << TILES_IN_X_LSB_SHIFT; 582 } 583 else 584 fbiinit1 |= ntiles << TILES_IN_X_SHIFT; 585 586 switch (info->var.bits_per_pixel) { 587 case 16: 588 fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL; 589 break; 590 default: 591 return -EINVAL; 592 } 593 sst_write(FBIINIT1, fbiinit1); 594 if (IS_VOODOO2(par)) { 595 sst_write(FBIINIT6, fbiinit6); 596 fbiinit5=sst_read(FBIINIT5) & FBIINIT5_MASK ; 597 if (info->var.vmode & FB_VMODE_INTERLACED) 598 fbiinit5 |= INTERLACE; 599 if (info->var.vmode & FB_VMODE_DOUBLE) 600 fbiinit5 |= VDOUBLESCAN; 601 if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) 602 fbiinit5 |= HSYNC_HIGH; 603 if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) 604 fbiinit5 |= VSYNC_HIGH; 605 sst_write(FBIINIT5, fbiinit5); 606 } 607 sst_wait_idle(); 608 sst_unset_bits(FBIINIT1, VIDEO_RESET); 609 sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET); 610 sst_set_bits(FBIINIT2, EN_DRAM_REFRESH); 611 /* disables fbiinit writes */ 612 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR); 613 614 /* set lfbmode : set mode + front buffer for reads/writes 615 + disable pipeline */ 616 switch (info->var.bits_per_pixel) { 617 case 16: 618 lfbmode = LFB_565; 619 break; 620 default: 621 return -EINVAL; 622 } 623 624 #if defined(__BIG_ENDIAN) 625 /* Enable byte-swizzle functionality in hardware. 626 * With this enabled, all our read- and write-accesses to 627 * the voodoo framebuffer can be done in native format, and 628 * the hardware will automatically convert it to little-endian. 629 * - tested on HP-PARISC, Helge Deller <deller@gmx.de> */ 630 lfbmode |= ( LFB_WORD_SWIZZLE_WR | LFB_BYTE_SWIZZLE_WR | 631 LFB_WORD_SWIZZLE_RD | LFB_BYTE_SWIZZLE_RD ); 632 #endif 633 634 if (clipping) { 635 sst_write(LFBMODE, lfbmode | EN_PXL_PIPELINE); 636 /* 637 * Set "clipping" dimensions. If clipping is disabled and 638 * writes to offscreen areas of the framebuffer are performed, 639 * the "behaviour is undefined" (_very_ undefined) - Urs 640 */ 641 /* btw, it requires enabling pixel pipeline in LFBMODE . 642 off screen read/writes will just wrap and read/print pixels 643 on screen. Ugly but not that dangerous */ 644 f_ddprintk("setting clipping dimensions 0..%d, 0..%d\n", 645 info->var.xres - 1, par->yDim - 1); 646 647 sst_write(CLIP_LEFT_RIGHT, info->var.xres); 648 sst_write(CLIP_LOWY_HIGHY, par->yDim); 649 sst_set_bits(FBZMODE, EN_CLIPPING | EN_RGB_WRITE); 650 } else { 651 /* no clipping : direct access, no pipeline */ 652 sst_write(LFBMODE, lfbmode); 653 } 654 return 0; 655 } 656 657 /** 658 * sstfb_setcolreg - Optional function. Sets a color register. 659 * @regno: hardware colormap register 660 * @red: frame buffer colormap structure 661 * @green: The green value which can be up to 16 bits wide 662 * @blue: The blue value which can be up to 16 bits wide. 663 * @transp: If supported the alpha value which can be up to 16 bits wide. 664 * @info: frame buffer info structure 665 */ 666 static int sstfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 667 u_int transp, struct fb_info *info) 668 { 669 struct sstfb_par *par = info->par; 670 u32 col; 671 672 f_dddprintk("sstfb_setcolreg\n"); 673 f_dddprintk("%-2d rgbt: %#x, %#x, %#x, %#x\n", 674 regno, red, green, blue, transp); 675 if (regno > 15) 676 return 0; 677 678 red >>= (16 - info->var.red.length); 679 green >>= (16 - info->var.green.length); 680 blue >>= (16 - info->var.blue.length); 681 transp >>= (16 - info->var.transp.length); 682 col = (red << info->var.red.offset) 683 | (green << info->var.green.offset) 684 | (blue << info->var.blue.offset) 685 | (transp << info->var.transp.offset); 686 687 par->palette[regno] = col; 688 689 return 0; 690 } 691 692 static void sstfb_setvgapass( struct fb_info *info, int enable ) 693 { 694 struct sstfb_par *par = info->par; 695 struct pci_dev *sst_dev = par->dev; 696 u32 fbiinit0, tmp; 697 698 enable = enable ? 1:0; 699 if (par->vgapass == enable) 700 return; 701 par->vgapass = enable; 702 703 pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp); 704 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, 705 tmp | PCI_EN_INIT_WR ); 706 fbiinit0 = sst_read (FBIINIT0); 707 if (par->vgapass) { 708 sst_write(FBIINIT0, fbiinit0 & ~DIS_VGA_PASSTHROUGH); 709 fb_info(info, "Enabling VGA pass-through\n"); 710 } else { 711 sst_write(FBIINIT0, fbiinit0 | DIS_VGA_PASSTHROUGH); 712 fb_info(info, "Disabling VGA pass-through\n"); 713 } 714 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp); 715 } 716 717 static ssize_t store_vgapass(struct device *device, struct device_attribute *attr, 718 const char *buf, size_t count) 719 { 720 struct fb_info *info = dev_get_drvdata(device); 721 char ** last = NULL; 722 int val; 723 724 val = simple_strtoul(buf, last, 0); 725 sstfb_setvgapass(info, val); 726 727 return count; 728 } 729 730 static ssize_t show_vgapass(struct device *device, struct device_attribute *attr, 731 char *buf) 732 { 733 struct fb_info *info = dev_get_drvdata(device); 734 struct sstfb_par *par = info->par; 735 return snprintf(buf, PAGE_SIZE, "%d\n", par->vgapass); 736 } 737 738 static struct device_attribute device_attrs[] = { 739 __ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass) 740 }; 741 742 static int sstfb_ioctl(struct fb_info *info, unsigned int cmd, 743 unsigned long arg) 744 { 745 struct sstfb_par *par; 746 u32 val; 747 748 switch (cmd) { 749 /* set/get VGA pass_through mode */ 750 case SSTFB_SET_VGAPASS: 751 if (copy_from_user(&val, (void __user *)arg, sizeof(val))) 752 return -EFAULT; 753 sstfb_setvgapass(info, val); 754 return 0; 755 case SSTFB_GET_VGAPASS: 756 par = info->par; 757 val = par->vgapass; 758 if (copy_to_user((void __user *)arg, &val, sizeof(val))) 759 return -EFAULT; 760 return 0; 761 } 762 763 return -EINVAL; 764 } 765 766 767 /* 768 * Screen-to-Screen BitBlt 2D command (for the bmove fb op.) - Voodoo2 only 769 */ 770 #if 0 771 static void sstfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) 772 { 773 struct sstfb_par *par = info->par; 774 u32 stride = info->fix.line_length; 775 776 if (!IS_VOODOO2(par)) 777 return; 778 779 sst_write(BLTSRCBASEADDR, 0); 780 sst_write(BLTDSTBASEADDR, 0); 781 sst_write(BLTROP, BLTROP_COPY); 782 sst_write(BLTXYSTRIDES, stride | (stride << 16)); 783 sst_write(BLTSRCXY, area->sx | (area->sy << 16)); 784 sst_write(BLTDSTXY, area->dx | (area->dy << 16)); 785 sst_write(BLTSIZE, area->width | (area->height << 16)); 786 sst_write(BLTCOMMAND, BLT_SCR2SCR_BITBLT | LAUNCH_BITBLT | 787 (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) ); 788 sst_wait_idle(); 789 } 790 #endif 791 792 793 /* 794 * FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only 795 */ 796 #if 0 797 static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 798 { 799 struct sstfb_par *par = info->par; 800 u32 stride = info->fix.line_length; 801 802 if (!IS_VOODOO2(par)) 803 return; 804 805 sst_write(BLTCLIPX, info->var.xres); 806 sst_write(BLTCLIPY, info->var.yres); 807 808 sst_write(BLTDSTBASEADDR, 0); 809 sst_write(BLTCOLOR, rect->color); 810 sst_write(BLTROP, rect->rop == ROP_COPY ? BLTROP_COPY : BLTROP_XOR); 811 sst_write(BLTXYSTRIDES, stride | (stride << 16)); 812 sst_write(BLTDSTXY, rect->dx | (rect->dy << 16)); 813 sst_write(BLTSIZE, rect->width | (rect->height << 16)); 814 sst_write(BLTCOMMAND, BLT_RECFILL_BITBLT | LAUNCH_BITBLT 815 | (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) | BIT(16) ); 816 sst_wait_idle(); 817 } 818 #endif 819 820 821 822 /* 823 * get lfb size 824 */ 825 static int sst_get_memsize(struct fb_info *info, __u32 *memsize) 826 { 827 u8 __iomem *fbbase_virt = info->screen_base; 828 829 /* force memsize */ 830 if (mem >= 1 && mem <= 4) { 831 *memsize = (mem * 0x100000); 832 printk(KERN_INFO "supplied memsize: %#x\n", *memsize); 833 return 1; 834 } 835 836 writel(0xdeadbeef, fbbase_virt); 837 writel(0xdeadbeef, fbbase_virt+0x100000); 838 writel(0xdeadbeef, fbbase_virt+0x200000); 839 f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n", 840 readl(fbbase_virt), readl(fbbase_virt + 0x100000), 841 readl(fbbase_virt + 0x200000)); 842 843 writel(0xabcdef01, fbbase_virt); 844 845 f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n", 846 readl(fbbase_virt), readl(fbbase_virt + 0x100000), 847 readl(fbbase_virt + 0x200000)); 848 849 /* checks for 4mb lfb, then 2, then defaults to 1 */ 850 if (readl(fbbase_virt + 0x200000) == 0xdeadbeef) 851 *memsize = 0x400000; 852 else if (readl(fbbase_virt + 0x100000) == 0xdeadbeef) 853 *memsize = 0x200000; 854 else 855 *memsize = 0x100000; 856 f_ddprintk("detected memsize: %dMB\n", *memsize >> 20); 857 return 1; 858 } 859 860 861 /* 862 * DAC detection routines 863 */ 864 865 /* fbi should be idle, and fifo emty and mem disabled */ 866 /* supposed to detect AT&T ATT20C409 and Ti TVP3409 ramdacs */ 867 868 static int sst_detect_att(struct fb_info *info) 869 { 870 struct sstfb_par *par = info->par; 871 int i, mir, dir; 872 873 for (i = 0; i < 3; i++) { 874 sst_dac_write(DACREG_WMA, 0); /* backdoor */ 875 sst_dac_read(DACREG_RMR); /* read 4 times RMR */ 876 sst_dac_read(DACREG_RMR); 877 sst_dac_read(DACREG_RMR); 878 sst_dac_read(DACREG_RMR); 879 /* the fifth time, CR0 is read */ 880 sst_dac_read(DACREG_RMR); 881 /* the 6th, manufacturer id register */ 882 mir = sst_dac_read(DACREG_RMR); 883 /*the 7th, device ID register */ 884 dir = sst_dac_read(DACREG_RMR); 885 f_ddprintk("mir: %#x, dir: %#x\n", mir, dir); 886 if (mir == DACREG_MIR_ATT && dir == DACREG_DIR_ATT) { 887 return 1; 888 } 889 } 890 return 0; 891 } 892 893 static int sst_detect_ti(struct fb_info *info) 894 { 895 struct sstfb_par *par = info->par; 896 int i, mir, dir; 897 898 for (i = 0; i<3; i++) { 899 sst_dac_write(DACREG_WMA, 0); /* backdoor */ 900 sst_dac_read(DACREG_RMR); /* read 4 times RMR */ 901 sst_dac_read(DACREG_RMR); 902 sst_dac_read(DACREG_RMR); 903 sst_dac_read(DACREG_RMR); 904 /* the fifth time, CR0 is read */ 905 sst_dac_read(DACREG_RMR); 906 /* the 6th, manufacturer id register */ 907 mir = sst_dac_read(DACREG_RMR); 908 /*the 7th, device ID register */ 909 dir = sst_dac_read(DACREG_RMR); 910 f_ddprintk("mir: %#x, dir: %#x\n", mir, dir); 911 if ((mir == DACREG_MIR_TI ) && (dir == DACREG_DIR_TI)) { 912 return 1; 913 } 914 } 915 return 0; 916 } 917 918 /* 919 * try to detect ICS5342 ramdac 920 * we get the 1st byte (M value) of preset f1,f7 and fB 921 * why those 3 ? mmmh... for now, i'll do it the glide way... 922 * and ask questions later. anyway, it seems that all the freq registers are 923 * really at their default state (cf specs) so i ask again, why those 3 regs ? 924 * mmmmh.. it seems that's much more ugly than i thought. we use f0 and fA for 925 * pll programming, so in fact, we *hope* that the f1, f7 & fB won't be 926 * touched... 927 * is it really safe ? how can i reset this ramdac ? geee... 928 */ 929 static int sst_detect_ics(struct fb_info *info) 930 { 931 struct sstfb_par *par = info->par; 932 int m_clk0_1, m_clk0_7, m_clk1_b; 933 int n_clk0_1, n_clk0_7, n_clk1_b; 934 int i; 935 936 for (i = 0; i<5; i++ ) { 937 sst_dac_write(DACREG_ICS_PLLRMA, 0x1); /* f1 */ 938 m_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA); 939 n_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA); 940 sst_dac_write(DACREG_ICS_PLLRMA, 0x7); /* f7 */ 941 m_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA); 942 n_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA); 943 sst_dac_write(DACREG_ICS_PLLRMA, 0xb); /* fB */ 944 m_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA); 945 n_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA); 946 f_ddprintk("m_clk0_1: %#x, m_clk0_7: %#x, m_clk1_b: %#x\n", 947 m_clk0_1, m_clk0_7, m_clk1_b); 948 f_ddprintk("n_clk0_1: %#x, n_clk0_7: %#x, n_clk1_b: %#x\n", 949 n_clk0_1, n_clk0_7, n_clk1_b); 950 if (( m_clk0_1 == DACREG_ICS_PLL_CLK0_1_INI) 951 && (m_clk0_7 == DACREG_ICS_PLL_CLK0_7_INI) 952 && (m_clk1_b == DACREG_ICS_PLL_CLK1_B_INI)) { 953 return 1; 954 } 955 } 956 return 0; 957 } 958 959 960 /* 961 * gfx, video, pci fifo should be reset, dram refresh disabled 962 * see detect_dac 963 */ 964 965 static int sst_set_pll_att_ti(struct fb_info *info, 966 const struct pll_timing *t, const int clock) 967 { 968 struct sstfb_par *par = info->par; 969 u8 cr0, cc; 970 971 /* enable indexed mode */ 972 sst_dac_write(DACREG_WMA, 0); /* backdoor */ 973 sst_dac_read(DACREG_RMR); /* 1 time: RMR */ 974 sst_dac_read(DACREG_RMR); /* 2 RMR */ 975 sst_dac_read(DACREG_RMR); /* 3 // */ 976 sst_dac_read(DACREG_RMR); /* 4 // */ 977 cr0 = sst_dac_read(DACREG_RMR); /* 5 CR0 */ 978 979 sst_dac_write(DACREG_WMA, 0); 980 sst_dac_read(DACREG_RMR); 981 sst_dac_read(DACREG_RMR); 982 sst_dac_read(DACREG_RMR); 983 sst_dac_read(DACREG_RMR); 984 sst_dac_write(DACREG_RMR, (cr0 & 0xf0) 985 | DACREG_CR0_EN_INDEXED 986 | DACREG_CR0_8BIT 987 | DACREG_CR0_PWDOWN ); 988 /* so, now we are in indexed mode . dunno if its common, but 989 i find this way of doing things a little bit weird :p */ 990 991 udelay(300); 992 cc = dac_i_read(DACREG_CC_I); 993 switch (clock) { 994 case VID_CLOCK: 995 dac_i_write(DACREG_AC0_I, t->m); 996 dac_i_write(DACREG_AC1_I, t->p << 6 | t->n); 997 dac_i_write(DACREG_CC_I, 998 (cc & 0x0f) | DACREG_CC_CLKA | DACREG_CC_CLKA_C); 999 break; 1000 case GFX_CLOCK: 1001 dac_i_write(DACREG_BD0_I, t->m); 1002 dac_i_write(DACREG_BD1_I, t->p << 6 | t->n); 1003 dac_i_write(DACREG_CC_I, 1004 (cc & 0xf0) | DACREG_CC_CLKB | DACREG_CC_CLKB_D); 1005 break; 1006 default: 1007 dprintk("%s: wrong clock code '%d'\n", 1008 __func__, clock); 1009 return 0; 1010 } 1011 udelay(300); 1012 1013 /* power up the dac & return to "normal" non-indexed mode */ 1014 dac_i_write(DACREG_CR0_I, 1015 cr0 & ~DACREG_CR0_PWDOWN & ~DACREG_CR0_EN_INDEXED); 1016 return 1; 1017 } 1018 1019 static int sst_set_pll_ics(struct fb_info *info, 1020 const struct pll_timing *t, const int clock) 1021 { 1022 struct sstfb_par *par = info->par; 1023 u8 pll_ctrl; 1024 1025 sst_dac_write(DACREG_ICS_PLLRMA, DACREG_ICS_PLL_CTRL); 1026 pll_ctrl = sst_dac_read(DACREG_ICS_PLLDATA); 1027 switch(clock) { 1028 case VID_CLOCK: 1029 sst_dac_write(DACREG_ICS_PLLWMA, 0x0); /* CLK0, f0 */ 1030 sst_dac_write(DACREG_ICS_PLLDATA, t->m); 1031 sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n); 1032 /* selects freq f0 for clock 0 */ 1033 sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL); 1034 sst_dac_write(DACREG_ICS_PLLDATA, 1035 (pll_ctrl & 0xd8) 1036 | DACREG_ICS_CLK0 1037 | DACREG_ICS_CLK0_0); 1038 break; 1039 case GFX_CLOCK : 1040 sst_dac_write(DACREG_ICS_PLLWMA, 0xa); /* CLK1, fA */ 1041 sst_dac_write(DACREG_ICS_PLLDATA, t->m); 1042 sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n); 1043 /* selects freq fA for clock 1 */ 1044 sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL); 1045 sst_dac_write(DACREG_ICS_PLLDATA, 1046 (pll_ctrl & 0xef) | DACREG_ICS_CLK1_A); 1047 break; 1048 default: 1049 dprintk("%s: wrong clock code '%d'\n", 1050 __func__, clock); 1051 return 0; 1052 } 1053 udelay(300); 1054 return 1; 1055 } 1056 1057 static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp) 1058 { 1059 struct sstfb_par *par = info->par; 1060 u8 cr0; 1061 1062 sst_dac_write(DACREG_WMA, 0); /* backdoor */ 1063 sst_dac_read(DACREG_RMR); /* read 4 times RMR */ 1064 sst_dac_read(DACREG_RMR); 1065 sst_dac_read(DACREG_RMR); 1066 sst_dac_read(DACREG_RMR); 1067 /* the fifth time, CR0 is read */ 1068 cr0 = sst_dac_read(DACREG_RMR); 1069 1070 sst_dac_write(DACREG_WMA, 0); /* backdoor */ 1071 sst_dac_read(DACREG_RMR); /* read 4 times RMR */ 1072 sst_dac_read(DACREG_RMR); 1073 sst_dac_read(DACREG_RMR); 1074 sst_dac_read(DACREG_RMR); 1075 /* cr0 */ 1076 switch(bpp) { 1077 case 16: 1078 sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP); 1079 break; 1080 default: 1081 dprintk("%s: bad depth '%u'\n", __func__, bpp); 1082 break; 1083 } 1084 } 1085 1086 static void sst_set_vidmod_ics(struct fb_info *info, const int bpp) 1087 { 1088 struct sstfb_par *par = info->par; 1089 1090 switch(bpp) { 1091 case 16: 1092 sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP); 1093 break; 1094 default: 1095 dprintk("%s: bad depth '%u'\n", __func__, bpp); 1096 break; 1097 } 1098 } 1099 1100 /* 1101 * detect dac type 1102 * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset, 1103 * dram refresh disabled, FbiInit remaped. 1104 * TODO: mmh.. maybe i should put the "prerequisite" in the func ... 1105 */ 1106 1107 1108 static struct dac_switch dacs[] = { 1109 { .name = "TI TVP3409", 1110 .detect = sst_detect_ti, 1111 .set_pll = sst_set_pll_att_ti, 1112 .set_vidmod = sst_set_vidmod_att_ti }, 1113 1114 { .name = "AT&T ATT20C409", 1115 .detect = sst_detect_att, 1116 .set_pll = sst_set_pll_att_ti, 1117 .set_vidmod = sst_set_vidmod_att_ti }, 1118 { .name = "ICS ICS5342", 1119 .detect = sst_detect_ics, 1120 .set_pll = sst_set_pll_ics, 1121 .set_vidmod = sst_set_vidmod_ics }, 1122 }; 1123 1124 static int sst_detect_dactype(struct fb_info *info, struct sstfb_par *par) 1125 { 1126 int i, ret = 0; 1127 1128 for (i = 0; i < ARRAY_SIZE(dacs); i++) { 1129 ret = dacs[i].detect(info); 1130 if (ret) 1131 break; 1132 } 1133 if (!ret) 1134 return 0; 1135 f_dprintk("%s found %s\n", __func__, dacs[i].name); 1136 par->dac_sw = dacs[i]; 1137 return 1; 1138 } 1139 1140 /* 1141 * Internal Routines 1142 */ 1143 static int sst_init(struct fb_info *info, struct sstfb_par *par) 1144 { 1145 u32 fbiinit0, fbiinit1, fbiinit4; 1146 struct pci_dev *dev = par->dev; 1147 struct pll_timing gfx_timings; 1148 struct sst_spec *spec; 1149 int Fout; 1150 int gfx_clock; 1151 1152 spec = &voodoo_spec[par->type]; 1153 f_ddprintk(" fbiinit0 fbiinit1 fbiinit2 fbiinit3 fbiinit4 " 1154 " fbiinit6\n"); 1155 f_ddprintk("%0#10x %0#10x %0#10x %0#10x %0#10x %0#10x\n", 1156 sst_read(FBIINIT0), sst_read(FBIINIT1), sst_read(FBIINIT2), 1157 sst_read(FBIINIT3), sst_read(FBIINIT4), sst_read(FBIINIT6)); 1158 /* disable video clock */ 1159 pci_write_config_dword(dev, PCI_VCLK_DISABLE, 0); 1160 1161 /* enable writing to init registers, disable pci fifo */ 1162 pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR); 1163 /* reset video */ 1164 sst_set_bits(FBIINIT1, VIDEO_RESET); 1165 sst_wait_idle(); 1166 /* reset gfx + pci fifo */ 1167 sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET); 1168 sst_wait_idle(); 1169 1170 /* unreset fifo */ 1171 /*sst_unset_bits(FBIINIT0, FIFO_RESET); 1172 sst_wait_idle();*/ 1173 /* unreset FBI */ 1174 /*sst_unset_bits(FBIINIT0, FBI_RESET); 1175 sst_wait_idle();*/ 1176 1177 /* disable dram refresh */ 1178 sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH); 1179 sst_wait_idle(); 1180 /* remap fbinit2/3 to dac */ 1181 pci_write_config_dword(dev, PCI_INIT_ENABLE, 1182 PCI_EN_INIT_WR | PCI_REMAP_DAC ); 1183 /* detect dac type */ 1184 if (!sst_detect_dactype(info, par)) { 1185 printk(KERN_ERR "sstfb: unknown dac type.\n"); 1186 //FIXME watch it: we are not in a safe state, bad bad bad. 1187 return 0; 1188 } 1189 1190 /* set graphic clock */ 1191 gfx_clock = spec->default_gfx_clock; 1192 if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) { 1193 printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk); 1194 gfx_clock = gfxclk *1000; 1195 } else if (gfxclk) { 1196 printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk); 1197 } 1198 1199 sst_calc_pll(gfx_clock, &Fout, &gfx_timings); 1200 par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK); 1201 1202 /* disable fbiinit remap */ 1203 pci_write_config_dword(dev, PCI_INIT_ENABLE, 1204 PCI_EN_INIT_WR| PCI_EN_FIFO_WR ); 1205 /* defaults init registers */ 1206 /* FbiInit0: unreset gfx, unreset fifo */ 1207 fbiinit0 = FBIINIT0_DEFAULT; 1208 fbiinit1 = FBIINIT1_DEFAULT; 1209 fbiinit4 = FBIINIT4_DEFAULT; 1210 par->vgapass = vgapass; 1211 if (par->vgapass) 1212 fbiinit0 &= ~DIS_VGA_PASSTHROUGH; 1213 else 1214 fbiinit0 |= DIS_VGA_PASSTHROUGH; 1215 if (slowpci) { 1216 fbiinit1 |= SLOW_PCI_WRITES; 1217 fbiinit4 |= SLOW_PCI_READS; 1218 } else { 1219 fbiinit1 &= ~SLOW_PCI_WRITES; 1220 fbiinit4 &= ~SLOW_PCI_READS; 1221 } 1222 sst_write(FBIINIT0, fbiinit0); 1223 sst_wait_idle(); 1224 sst_write(FBIINIT1, fbiinit1); 1225 sst_wait_idle(); 1226 sst_write(FBIINIT2, FBIINIT2_DEFAULT); 1227 sst_wait_idle(); 1228 sst_write(FBIINIT3, FBIINIT3_DEFAULT); 1229 sst_wait_idle(); 1230 sst_write(FBIINIT4, fbiinit4); 1231 sst_wait_idle(); 1232 if (IS_VOODOO2(par)) { 1233 sst_write(FBIINIT6, FBIINIT6_DEFAULT); 1234 sst_wait_idle(); 1235 } 1236 1237 pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR); 1238 pci_write_config_dword(dev, PCI_VCLK_ENABLE, 0); 1239 return 1; 1240 } 1241 1242 static void sst_shutdown(struct fb_info *info) 1243 { 1244 struct sstfb_par *par = info->par; 1245 struct pci_dev *dev = par->dev; 1246 struct pll_timing gfx_timings; 1247 int Fout; 1248 1249 /* reset video, gfx, fifo, disable dram + remap fbiinit2/3 */ 1250 pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR); 1251 sst_set_bits(FBIINIT1, VIDEO_RESET | EN_BLANKING); 1252 sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH); 1253 sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET); 1254 sst_wait_idle(); 1255 pci_write_config_dword(dev, PCI_INIT_ENABLE, 1256 PCI_EN_INIT_WR | PCI_REMAP_DAC); 1257 /* set 20Mhz gfx clock */ 1258 sst_calc_pll(20000, &Fout, &gfx_timings); 1259 par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK); 1260 /* TODO maybe shutdown the dac, vrefresh and so on... */ 1261 pci_write_config_dword(dev, PCI_INIT_ENABLE, 1262 PCI_EN_INIT_WR); 1263 sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | DIS_VGA_PASSTHROUGH); 1264 pci_write_config_dword(dev, PCI_VCLK_DISABLE,0); 1265 /* maybe keep fbiinit* and PCI_INIT_enable in the fb_info struct 1266 * from start ? */ 1267 pci_write_config_dword(dev, PCI_INIT_ENABLE, 0); 1268 1269 } 1270 1271 /* 1272 * Interface to the world 1273 */ 1274 static int sstfb_setup(char *options) 1275 { 1276 char *this_opt; 1277 1278 if (!options || !*options) 1279 return 0; 1280 1281 while ((this_opt = strsep(&options, ",")) != NULL) { 1282 if (!*this_opt) continue; 1283 1284 f_ddprintk("option %s\n", this_opt); 1285 1286 if (!strcmp(this_opt, "vganopass")) 1287 vgapass = 0; 1288 else if (!strcmp(this_opt, "vgapass")) 1289 vgapass = 1; 1290 else if (!strcmp(this_opt, "clipping")) 1291 clipping = 1; 1292 else if (!strcmp(this_opt, "noclipping")) 1293 clipping = 0; 1294 else if (!strcmp(this_opt, "fastpci")) 1295 slowpci = 0; 1296 else if (!strcmp(this_opt, "slowpci")) 1297 slowpci = 1; 1298 else if (!strncmp(this_opt, "mem:",4)) 1299 mem = simple_strtoul (this_opt+4, NULL, 0); 1300 else if (!strncmp(this_opt, "gfxclk:",7)) 1301 gfxclk = simple_strtoul (this_opt+7, NULL, 0); 1302 else 1303 mode_option = this_opt; 1304 } 1305 return 0; 1306 } 1307 1308 1309 static struct fb_ops sstfb_ops = { 1310 .owner = THIS_MODULE, 1311 .fb_check_var = sstfb_check_var, 1312 .fb_set_par = sstfb_set_par, 1313 .fb_setcolreg = sstfb_setcolreg, 1314 .fb_fillrect = cfb_fillrect, /* sstfb_fillrect */ 1315 .fb_copyarea = cfb_copyarea, /* sstfb_copyarea */ 1316 .fb_imageblit = cfb_imageblit, 1317 .fb_ioctl = sstfb_ioctl, 1318 }; 1319 1320 static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) 1321 { 1322 struct fb_info *info; 1323 struct fb_fix_screeninfo *fix; 1324 struct sstfb_par *par; 1325 struct sst_spec *spec; 1326 int err; 1327 1328 /* Enable device in PCI config. */ 1329 if ((err=pci_enable_device(pdev))) { 1330 printk(KERN_ERR "cannot enable device\n"); 1331 return err; 1332 } 1333 1334 /* Allocate the fb and par structures. */ 1335 info = framebuffer_alloc(sizeof(struct sstfb_par), &pdev->dev); 1336 if (!info) 1337 return -ENOMEM; 1338 1339 pci_set_drvdata(pdev, info); 1340 1341 par = info->par; 1342 fix = &info->fix; 1343 1344 par->type = id->driver_data; 1345 spec = &voodoo_spec[par->type]; 1346 f_ddprintk("found device : %s\n", spec->name); 1347 1348 par->dev = pdev; 1349 par->revision = pdev->revision; 1350 1351 fix->mmio_start = pci_resource_start(pdev,0); 1352 fix->mmio_len = 0x400000; 1353 fix->smem_start = fix->mmio_start + 0x400000; 1354 1355 if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) { 1356 printk(KERN_ERR "sstfb: cannot reserve mmio memory\n"); 1357 goto fail_mmio_mem; 1358 } 1359 1360 if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) { 1361 printk(KERN_ERR "sstfb: cannot reserve fb memory\n"); 1362 goto fail_fb_mem; 1363 } 1364 1365 par->mmio_vbase = ioremap_nocache(fix->mmio_start, 1366 fix->mmio_len); 1367 if (!par->mmio_vbase) { 1368 printk(KERN_ERR "sstfb: cannot remap register area %#lx\n", 1369 fix->mmio_start); 1370 goto fail_mmio_remap; 1371 } 1372 info->screen_base = ioremap_nocache(fix->smem_start, 0x400000); 1373 if (!info->screen_base) { 1374 printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n", 1375 fix->smem_start); 1376 goto fail_fb_remap; 1377 } 1378 1379 if (!sst_init(info, par)) { 1380 printk(KERN_ERR "sstfb: Init failed\n"); 1381 goto fail; 1382 } 1383 sst_get_memsize(info, &fix->smem_len); 1384 strlcpy(fix->id, spec->name, sizeof(fix->id)); 1385 1386 printk(KERN_INFO "%s (revision %d) with %s dac\n", 1387 fix->id, par->revision, par->dac_sw.name); 1388 printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n", 1389 fix->smem_start, info->screen_base, 1390 fix->smem_len >> 20); 1391 1392 f_ddprintk("regbase_virt: %#lx\n", par->mmio_vbase); 1393 f_ddprintk("membase_phys: %#lx\n", fix->smem_start); 1394 f_ddprintk("fbbase_virt: %p\n", info->screen_base); 1395 1396 info->flags = FBINFO_DEFAULT; 1397 info->fbops = &sstfb_ops; 1398 info->pseudo_palette = par->palette; 1399 1400 fix->type = FB_TYPE_PACKED_PIXELS; 1401 fix->visual = FB_VISUAL_TRUECOLOR; 1402 fix->accel = FB_ACCEL_NONE; /* FIXME */ 1403 /* 1404 * According to the specs, the linelength must be of 1024 *pixels* 1405 * and the 24bpp mode is in fact a 32 bpp mode (and both are in 1406 * fact dithered to 16bit). 1407 */ 1408 fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */ 1409 1410 fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16); 1411 1412 if (sstfb_check_var(&info->var, info)) { 1413 printk(KERN_ERR "sstfb: invalid video mode.\n"); 1414 goto fail; 1415 } 1416 1417 if (sstfb_set_par(info)) { 1418 printk(KERN_ERR "sstfb: can't set default video mode.\n"); 1419 goto fail; 1420 } 1421 1422 if (fb_alloc_cmap(&info->cmap, 256, 0)) { 1423 printk(KERN_ERR "sstfb: can't alloc cmap memory.\n"); 1424 goto fail; 1425 } 1426 1427 /* register fb */ 1428 info->device = &pdev->dev; 1429 if (register_framebuffer(info) < 0) { 1430 printk(KERN_ERR "sstfb: can't register framebuffer.\n"); 1431 goto fail_register; 1432 } 1433 1434 sstfb_clear_screen(info); 1435 1436 if (device_create_file(info->dev, &device_attrs[0])) 1437 printk(KERN_WARNING "sstfb: can't create sysfs entry.\n"); 1438 1439 1440 fb_info(info, "%s frame buffer device at 0x%p\n", 1441 fix->id, info->screen_base); 1442 1443 return 0; 1444 1445 fail_register: 1446 fb_dealloc_cmap(&info->cmap); 1447 fail: 1448 iounmap(info->screen_base); 1449 fail_fb_remap: 1450 iounmap(par->mmio_vbase); 1451 fail_mmio_remap: 1452 release_mem_region(fix->smem_start, 0x400000); 1453 fail_fb_mem: 1454 release_mem_region(fix->mmio_start, info->fix.mmio_len); 1455 fail_mmio_mem: 1456 framebuffer_release(info); 1457 return -ENXIO; /* no voodoo detected */ 1458 } 1459 1460 static void sstfb_remove(struct pci_dev *pdev) 1461 { 1462 struct sstfb_par *par; 1463 struct fb_info *info; 1464 1465 info = pci_get_drvdata(pdev); 1466 par = info->par; 1467 1468 device_remove_file(info->dev, &device_attrs[0]); 1469 sst_shutdown(info); 1470 iounmap(info->screen_base); 1471 iounmap(par->mmio_vbase); 1472 release_mem_region(info->fix.smem_start, 0x400000); 1473 release_mem_region(info->fix.mmio_start, info->fix.mmio_len); 1474 fb_dealloc_cmap(&info->cmap); 1475 unregister_framebuffer(info); 1476 framebuffer_release(info); 1477 } 1478 1479 1480 static const struct pci_device_id sstfb_id_tbl[] = { 1481 { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO ), 1482 .driver_data = ID_VOODOO1, }, 1483 { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2), 1484 .driver_data = ID_VOODOO2, }, 1485 { 0 }, 1486 }; 1487 1488 static struct pci_driver sstfb_driver = { 1489 .name = "sstfb", 1490 .id_table = sstfb_id_tbl, 1491 .probe = sstfb_probe, 1492 .remove = sstfb_remove, 1493 }; 1494 1495 1496 static int sstfb_init(void) 1497 { 1498 char *option = NULL; 1499 1500 if (fb_get_options("sstfb", &option)) 1501 return -ENODEV; 1502 sstfb_setup(option); 1503 1504 return pci_register_driver(&sstfb_driver); 1505 } 1506 1507 static void sstfb_exit(void) 1508 { 1509 pci_unregister_driver(&sstfb_driver); 1510 } 1511 1512 1513 module_init(sstfb_init); 1514 module_exit(sstfb_exit); 1515 1516 MODULE_AUTHOR("(c) 2000,2002 Ghozlane Toumi <gtoumi@laposte.net>"); 1517 MODULE_DESCRIPTION("FBDev driver for 3dfx Voodoo Graphics and Voodoo2 based video boards"); 1518 MODULE_LICENSE("GPL"); 1519 1520 module_param(mem, int, 0); 1521 MODULE_PARM_DESC(mem, "Size of frame buffer memory in MB (1, 2, 4 MB, default=autodetect)"); 1522 module_param(vgapass, bool, 0); 1523 MODULE_PARM_DESC(vgapass, "Enable VGA PassThrough mode (0 or 1) (default=0)"); 1524 module_param(clipping, bool, 0); 1525 MODULE_PARM_DESC(clipping, "Enable clipping (slower, safer) (0 or 1) (default=1)"); 1526 module_param(gfxclk, int, 0); 1527 MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)"); 1528 module_param(slowpci, bool, 0); 1529 MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)"); 1530 module_param(mode_option, charp, 0); 1531 MODULE_PARM_DESC(mode_option, "Initial video mode (default=" DEFAULT_VIDEO_MODE ")"); 1532 1533