1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Driver for the Solomon SSD1307 OLED controller 4 * 5 * Copyright 2012 Free Electrons 6 */ 7 8 #include <linux/backlight.h> 9 #include <linux/delay.h> 10 #include <linux/fb.h> 11 #include <linux/gpio/consumer.h> 12 #include <linux/i2c.h> 13 #include <linux/kernel.h> 14 #include <linux/module.h> 15 #include <linux/of_device.h> 16 #include <linux/of_gpio.h> 17 #include <linux/pwm.h> 18 #include <linux/uaccess.h> 19 #include <linux/regulator/consumer.h> 20 21 #define SSD1307FB_DATA 0x40 22 #define SSD1307FB_COMMAND 0x80 23 24 #define SSD1307FB_SET_ADDRESS_MODE 0x20 25 #define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL (0x00) 26 #define SSD1307FB_SET_ADDRESS_MODE_VERTICAL (0x01) 27 #define SSD1307FB_SET_ADDRESS_MODE_PAGE (0x02) 28 #define SSD1307FB_SET_COL_RANGE 0x21 29 #define SSD1307FB_SET_PAGE_RANGE 0x22 30 #define SSD1307FB_CONTRAST 0x81 31 #define SSD1307FB_SET_LOOKUP_TABLE 0x91 32 #define SSD1307FB_CHARGE_PUMP 0x8d 33 #define SSD1307FB_SEG_REMAP_ON 0xa1 34 #define SSD1307FB_DISPLAY_OFF 0xae 35 #define SSD1307FB_SET_MULTIPLEX_RATIO 0xa8 36 #define SSD1307FB_DISPLAY_ON 0xaf 37 #define SSD1307FB_START_PAGE_ADDRESS 0xb0 38 #define SSD1307FB_SET_DISPLAY_OFFSET 0xd3 39 #define SSD1307FB_SET_CLOCK_FREQ 0xd5 40 #define SSD1307FB_SET_AREA_COLOR_MODE 0xd8 41 #define SSD1307FB_SET_PRECHARGE_PERIOD 0xd9 42 #define SSD1307FB_SET_COM_PINS_CONFIG 0xda 43 #define SSD1307FB_SET_VCOMH 0xdb 44 45 #define MAX_CONTRAST 255 46 47 #define REFRESHRATE 1 48 49 static u_int refreshrate = REFRESHRATE; 50 module_param(refreshrate, uint, 0); 51 52 struct ssd1307fb_par; 53 54 struct ssd1307fb_deviceinfo { 55 u32 default_vcomh; 56 u32 default_dclk_div; 57 u32 default_dclk_frq; 58 int need_pwm; 59 int need_chargepump; 60 }; 61 62 struct ssd1307fb_par { 63 unsigned area_color_enable : 1; 64 unsigned com_invdir : 1; 65 unsigned com_lrremap : 1; 66 unsigned com_seq : 1; 67 unsigned lookup_table_set : 1; 68 unsigned low_power : 1; 69 unsigned seg_remap : 1; 70 u32 com_offset; 71 u32 contrast; 72 u32 dclk_div; 73 u32 dclk_frq; 74 const struct ssd1307fb_deviceinfo *device_info; 75 struct i2c_client *client; 76 u32 height; 77 struct fb_info *info; 78 u8 lookup_table[4]; 79 u32 page_offset; 80 u32 prechargep1; 81 u32 prechargep2; 82 struct pwm_device *pwm; 83 u32 pwm_period; 84 struct gpio_desc *reset; 85 struct regulator *vbat_reg; 86 u32 vcomh; 87 u32 width; 88 }; 89 90 struct ssd1307fb_array { 91 u8 type; 92 u8 data[]; 93 }; 94 95 static const struct fb_fix_screeninfo ssd1307fb_fix = { 96 .id = "Solomon SSD1307", 97 .type = FB_TYPE_PACKED_PIXELS, 98 .visual = FB_VISUAL_MONO10, 99 .xpanstep = 0, 100 .ypanstep = 0, 101 .ywrapstep = 0, 102 .accel = FB_ACCEL_NONE, 103 }; 104 105 static const struct fb_var_screeninfo ssd1307fb_var = { 106 .bits_per_pixel = 1, 107 .red = { .length = 1 }, 108 .green = { .length = 1 }, 109 .blue = { .length = 1 }, 110 }; 111 112 static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type) 113 { 114 struct ssd1307fb_array *array; 115 116 array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL); 117 if (!array) 118 return NULL; 119 120 array->type = type; 121 122 return array; 123 } 124 125 static int ssd1307fb_write_array(struct i2c_client *client, 126 struct ssd1307fb_array *array, u32 len) 127 { 128 int ret; 129 130 len += sizeof(struct ssd1307fb_array); 131 132 ret = i2c_master_send(client, (u8 *)array, len); 133 if (ret != len) { 134 dev_err(&client->dev, "Couldn't send I2C command.\n"); 135 return ret; 136 } 137 138 return 0; 139 } 140 141 static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd) 142 { 143 struct ssd1307fb_array *array; 144 int ret; 145 146 array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND); 147 if (!array) 148 return -ENOMEM; 149 150 array->data[0] = cmd; 151 152 ret = ssd1307fb_write_array(client, array, 1); 153 kfree(array); 154 155 return ret; 156 } 157 158 static void ssd1307fb_update_display(struct ssd1307fb_par *par) 159 { 160 struct ssd1307fb_array *array; 161 u8 *vmem = par->info->screen_buffer; 162 unsigned int line_length = par->info->fix.line_length; 163 unsigned int pages = DIV_ROUND_UP(par->height, 8); 164 int i, j, k; 165 166 array = ssd1307fb_alloc_array(par->width * pages, SSD1307FB_DATA); 167 if (!array) 168 return; 169 170 /* 171 * The screen is divided in pages, each having a height of 8 172 * pixels, and the width of the screen. When sending a byte of 173 * data to the controller, it gives the 8 bits for the current 174 * column. I.e, the first byte are the 8 bits of the first 175 * column, then the 8 bits for the second column, etc. 176 * 177 * 178 * Representation of the screen, assuming it is 5 bits 179 * wide. Each letter-number combination is a bit that controls 180 * one pixel. 181 * 182 * A0 A1 A2 A3 A4 183 * B0 B1 B2 B3 B4 184 * C0 C1 C2 C3 C4 185 * D0 D1 D2 D3 D4 186 * E0 E1 E2 E3 E4 187 * F0 F1 F2 F3 F4 188 * G0 G1 G2 G3 G4 189 * H0 H1 H2 H3 H4 190 * 191 * If you want to update this screen, you need to send 5 bytes: 192 * (1) A0 B0 C0 D0 E0 F0 G0 H0 193 * (2) A1 B1 C1 D1 E1 F1 G1 H1 194 * (3) A2 B2 C2 D2 E2 F2 G2 H2 195 * (4) A3 B3 C3 D3 E3 F3 G3 H3 196 * (5) A4 B4 C4 D4 E4 F4 G4 H4 197 */ 198 199 for (i = 0; i < pages; i++) { 200 for (j = 0; j < par->width; j++) { 201 int m = 8; 202 u32 array_idx = i * par->width + j; 203 array->data[array_idx] = 0; 204 /* Last page may be partial */ 205 if (i + 1 == pages && par->height % 8) 206 m = par->height % 8; 207 for (k = 0; k < m; k++) { 208 u8 byte = vmem[(8 * i + k) * line_length + 209 j / 8]; 210 u8 bit = (byte >> (j % 8)) & 1; 211 array->data[array_idx] |= bit << k; 212 } 213 } 214 } 215 216 ssd1307fb_write_array(par->client, array, par->width * pages); 217 kfree(array); 218 } 219 220 221 static ssize_t ssd1307fb_write(struct fb_info *info, const char __user *buf, 222 size_t count, loff_t *ppos) 223 { 224 struct ssd1307fb_par *par = info->par; 225 unsigned long total_size; 226 unsigned long p = *ppos; 227 void *dst; 228 229 total_size = info->fix.smem_len; 230 231 if (p > total_size) 232 return -EINVAL; 233 234 if (count + p > total_size) 235 count = total_size - p; 236 237 if (!count) 238 return -EINVAL; 239 240 dst = info->screen_buffer + p; 241 242 if (copy_from_user(dst, buf, count)) 243 return -EFAULT; 244 245 ssd1307fb_update_display(par); 246 247 *ppos += count; 248 249 return count; 250 } 251 252 static int ssd1307fb_blank(int blank_mode, struct fb_info *info) 253 { 254 struct ssd1307fb_par *par = info->par; 255 256 if (blank_mode != FB_BLANK_UNBLANK) 257 return ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF); 258 else 259 return ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); 260 } 261 262 static void ssd1307fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 263 { 264 struct ssd1307fb_par *par = info->par; 265 sys_fillrect(info, rect); 266 ssd1307fb_update_display(par); 267 } 268 269 static void ssd1307fb_copyarea(struct fb_info *info, const struct fb_copyarea *area) 270 { 271 struct ssd1307fb_par *par = info->par; 272 sys_copyarea(info, area); 273 ssd1307fb_update_display(par); 274 } 275 276 static void ssd1307fb_imageblit(struct fb_info *info, const struct fb_image *image) 277 { 278 struct ssd1307fb_par *par = info->par; 279 sys_imageblit(info, image); 280 ssd1307fb_update_display(par); 281 } 282 283 static const struct fb_ops ssd1307fb_ops = { 284 .owner = THIS_MODULE, 285 .fb_read = fb_sys_read, 286 .fb_write = ssd1307fb_write, 287 .fb_blank = ssd1307fb_blank, 288 .fb_fillrect = ssd1307fb_fillrect, 289 .fb_copyarea = ssd1307fb_copyarea, 290 .fb_imageblit = ssd1307fb_imageblit, 291 }; 292 293 static void ssd1307fb_deferred_io(struct fb_info *info, 294 struct list_head *pagelist) 295 { 296 ssd1307fb_update_display(info->par); 297 } 298 299 static int ssd1307fb_init(struct ssd1307fb_par *par) 300 { 301 int ret; 302 u32 precharge, dclk, com_invdir, compins; 303 struct pwm_args pargs; 304 305 if (par->device_info->need_pwm) { 306 par->pwm = pwm_get(&par->client->dev, NULL); 307 if (IS_ERR(par->pwm)) { 308 dev_err(&par->client->dev, "Could not get PWM from device tree!\n"); 309 return PTR_ERR(par->pwm); 310 } 311 312 /* 313 * FIXME: pwm_apply_args() should be removed when switching to 314 * the atomic PWM API. 315 */ 316 pwm_apply_args(par->pwm); 317 318 pwm_get_args(par->pwm, &pargs); 319 320 par->pwm_period = pargs.period; 321 /* Enable the PWM */ 322 pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period); 323 pwm_enable(par->pwm); 324 325 dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n", 326 par->pwm->pwm, par->pwm_period); 327 } 328 329 /* Set initial contrast */ 330 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); 331 if (ret < 0) 332 return ret; 333 334 ret = ssd1307fb_write_cmd(par->client, par->contrast); 335 if (ret < 0) 336 return ret; 337 338 /* Set segment re-map */ 339 if (par->seg_remap) { 340 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON); 341 if (ret < 0) 342 return ret; 343 } 344 345 /* Set COM direction */ 346 com_invdir = 0xc0 | par->com_invdir << 3; 347 ret = ssd1307fb_write_cmd(par->client, com_invdir); 348 if (ret < 0) 349 return ret; 350 351 /* Set multiplex ratio value */ 352 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO); 353 if (ret < 0) 354 return ret; 355 356 ret = ssd1307fb_write_cmd(par->client, par->height - 1); 357 if (ret < 0) 358 return ret; 359 360 /* set display offset value */ 361 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET); 362 if (ret < 0) 363 return ret; 364 365 ret = ssd1307fb_write_cmd(par->client, par->com_offset); 366 if (ret < 0) 367 return ret; 368 369 /* Set clock frequency */ 370 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ); 371 if (ret < 0) 372 return ret; 373 374 dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4; 375 ret = ssd1307fb_write_cmd(par->client, dclk); 376 if (ret < 0) 377 return ret; 378 379 /* Set Set Area Color Mode ON/OFF & Low Power Display Mode */ 380 if (par->area_color_enable || par->low_power) { 381 u32 mode; 382 383 ret = ssd1307fb_write_cmd(par->client, 384 SSD1307FB_SET_AREA_COLOR_MODE); 385 if (ret < 0) 386 return ret; 387 388 mode = (par->area_color_enable ? 0x30 : 0) | 389 (par->low_power ? 5 : 0); 390 ret = ssd1307fb_write_cmd(par->client, mode); 391 if (ret < 0) 392 return ret; 393 } 394 395 /* Set precharge period in number of ticks from the internal clock */ 396 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD); 397 if (ret < 0) 398 return ret; 399 400 precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4; 401 ret = ssd1307fb_write_cmd(par->client, precharge); 402 if (ret < 0) 403 return ret; 404 405 /* Set COM pins configuration */ 406 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG); 407 if (ret < 0) 408 return ret; 409 410 compins = 0x02 | !par->com_seq << 4 | par->com_lrremap << 5; 411 ret = ssd1307fb_write_cmd(par->client, compins); 412 if (ret < 0) 413 return ret; 414 415 /* Set VCOMH */ 416 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH); 417 if (ret < 0) 418 return ret; 419 420 ret = ssd1307fb_write_cmd(par->client, par->vcomh); 421 if (ret < 0) 422 return ret; 423 424 /* Turn on the DC-DC Charge Pump */ 425 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP); 426 if (ret < 0) 427 return ret; 428 429 ret = ssd1307fb_write_cmd(par->client, 430 BIT(4) | (par->device_info->need_chargepump ? BIT(2) : 0)); 431 if (ret < 0) 432 return ret; 433 434 /* Set lookup table */ 435 if (par->lookup_table_set) { 436 int i; 437 438 ret = ssd1307fb_write_cmd(par->client, 439 SSD1307FB_SET_LOOKUP_TABLE); 440 if (ret < 0) 441 return ret; 442 443 for (i = 0; i < ARRAY_SIZE(par->lookup_table); ++i) { 444 u8 val = par->lookup_table[i]; 445 446 if (val < 31 || val > 63) 447 dev_warn(&par->client->dev, 448 "lookup table index %d value out of range 31 <= %d <= 63\n", 449 i, val); 450 ret = ssd1307fb_write_cmd(par->client, val); 451 if (ret < 0) 452 return ret; 453 } 454 } 455 456 /* Switch to horizontal addressing mode */ 457 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE); 458 if (ret < 0) 459 return ret; 460 461 ret = ssd1307fb_write_cmd(par->client, 462 SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL); 463 if (ret < 0) 464 return ret; 465 466 /* Set column range */ 467 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE); 468 if (ret < 0) 469 return ret; 470 471 ret = ssd1307fb_write_cmd(par->client, 0x0); 472 if (ret < 0) 473 return ret; 474 475 ret = ssd1307fb_write_cmd(par->client, par->width - 1); 476 if (ret < 0) 477 return ret; 478 479 /* Set page range */ 480 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE); 481 if (ret < 0) 482 return ret; 483 484 ret = ssd1307fb_write_cmd(par->client, par->page_offset); 485 if (ret < 0) 486 return ret; 487 488 ret = ssd1307fb_write_cmd(par->client, 489 par->page_offset + 490 DIV_ROUND_UP(par->height, 8) - 1); 491 if (ret < 0) 492 return ret; 493 494 /* Clear the screen */ 495 ssd1307fb_update_display(par); 496 497 /* Turn on the display */ 498 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); 499 if (ret < 0) 500 return ret; 501 502 return 0; 503 } 504 505 static int ssd1307fb_update_bl(struct backlight_device *bdev) 506 { 507 struct ssd1307fb_par *par = bl_get_data(bdev); 508 int ret; 509 int brightness = bdev->props.brightness; 510 511 par->contrast = brightness; 512 513 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); 514 if (ret < 0) 515 return ret; 516 ret = ssd1307fb_write_cmd(par->client, par->contrast); 517 if (ret < 0) 518 return ret; 519 return 0; 520 } 521 522 static int ssd1307fb_get_brightness(struct backlight_device *bdev) 523 { 524 struct ssd1307fb_par *par = bl_get_data(bdev); 525 526 return par->contrast; 527 } 528 529 static int ssd1307fb_check_fb(struct backlight_device *bdev, 530 struct fb_info *info) 531 { 532 return (info->bl_dev == bdev); 533 } 534 535 static const struct backlight_ops ssd1307fb_bl_ops = { 536 .options = BL_CORE_SUSPENDRESUME, 537 .update_status = ssd1307fb_update_bl, 538 .get_brightness = ssd1307fb_get_brightness, 539 .check_fb = ssd1307fb_check_fb, 540 }; 541 542 static struct ssd1307fb_deviceinfo ssd1307fb_ssd1305_deviceinfo = { 543 .default_vcomh = 0x34, 544 .default_dclk_div = 1, 545 .default_dclk_frq = 7, 546 }; 547 548 static struct ssd1307fb_deviceinfo ssd1307fb_ssd1306_deviceinfo = { 549 .default_vcomh = 0x20, 550 .default_dclk_div = 1, 551 .default_dclk_frq = 8, 552 .need_chargepump = 1, 553 }; 554 555 static struct ssd1307fb_deviceinfo ssd1307fb_ssd1307_deviceinfo = { 556 .default_vcomh = 0x20, 557 .default_dclk_div = 2, 558 .default_dclk_frq = 12, 559 .need_pwm = 1, 560 }; 561 562 static struct ssd1307fb_deviceinfo ssd1307fb_ssd1309_deviceinfo = { 563 .default_vcomh = 0x34, 564 .default_dclk_div = 1, 565 .default_dclk_frq = 10, 566 }; 567 568 static const struct of_device_id ssd1307fb_of_match[] = { 569 { 570 .compatible = "solomon,ssd1305fb-i2c", 571 .data = (void *)&ssd1307fb_ssd1305_deviceinfo, 572 }, 573 { 574 .compatible = "solomon,ssd1306fb-i2c", 575 .data = (void *)&ssd1307fb_ssd1306_deviceinfo, 576 }, 577 { 578 .compatible = "solomon,ssd1307fb-i2c", 579 .data = (void *)&ssd1307fb_ssd1307_deviceinfo, 580 }, 581 { 582 .compatible = "solomon,ssd1309fb-i2c", 583 .data = (void *)&ssd1307fb_ssd1309_deviceinfo, 584 }, 585 {}, 586 }; 587 MODULE_DEVICE_TABLE(of, ssd1307fb_of_match); 588 589 static int ssd1307fb_probe(struct i2c_client *client, 590 const struct i2c_device_id *id) 591 { 592 struct backlight_device *bl; 593 char bl_name[12]; 594 struct fb_info *info; 595 struct device_node *node = client->dev.of_node; 596 struct fb_deferred_io *ssd1307fb_defio; 597 u32 vmem_size; 598 struct ssd1307fb_par *par; 599 void *vmem; 600 int ret; 601 602 if (!node) { 603 dev_err(&client->dev, "No device tree data found!\n"); 604 return -EINVAL; 605 } 606 607 info = framebuffer_alloc(sizeof(struct ssd1307fb_par), &client->dev); 608 if (!info) 609 return -ENOMEM; 610 611 par = info->par; 612 par->info = info; 613 par->client = client; 614 615 par->device_info = of_device_get_match_data(&client->dev); 616 617 par->reset = devm_gpiod_get_optional(&client->dev, "reset", 618 GPIOD_OUT_LOW); 619 if (IS_ERR(par->reset)) { 620 dev_err(&client->dev, "failed to get reset gpio: %ld\n", 621 PTR_ERR(par->reset)); 622 ret = PTR_ERR(par->reset); 623 goto fb_alloc_error; 624 } 625 626 par->vbat_reg = devm_regulator_get_optional(&client->dev, "vbat"); 627 if (IS_ERR(par->vbat_reg)) { 628 ret = PTR_ERR(par->vbat_reg); 629 if (ret == -ENODEV) { 630 par->vbat_reg = NULL; 631 } else { 632 dev_err(&client->dev, "failed to get VBAT regulator: %d\n", 633 ret); 634 goto fb_alloc_error; 635 } 636 } 637 638 if (of_property_read_u32(node, "solomon,width", &par->width)) 639 par->width = 96; 640 641 if (of_property_read_u32(node, "solomon,height", &par->height)) 642 par->height = 16; 643 644 if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset)) 645 par->page_offset = 1; 646 647 if (of_property_read_u32(node, "solomon,com-offset", &par->com_offset)) 648 par->com_offset = 0; 649 650 if (of_property_read_u32(node, "solomon,prechargep1", &par->prechargep1)) 651 par->prechargep1 = 2; 652 653 if (of_property_read_u32(node, "solomon,prechargep2", &par->prechargep2)) 654 par->prechargep2 = 2; 655 656 if (!of_property_read_u8_array(node, "solomon,lookup-table", 657 par->lookup_table, 658 ARRAY_SIZE(par->lookup_table))) 659 par->lookup_table_set = 1; 660 661 par->seg_remap = !of_property_read_bool(node, "solomon,segment-no-remap"); 662 par->com_seq = of_property_read_bool(node, "solomon,com-seq"); 663 par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap"); 664 par->com_invdir = of_property_read_bool(node, "solomon,com-invdir"); 665 par->area_color_enable = 666 of_property_read_bool(node, "solomon,area-color-enable"); 667 par->low_power = of_property_read_bool(node, "solomon,low-power"); 668 669 par->contrast = 127; 670 par->vcomh = par->device_info->default_vcomh; 671 672 /* Setup display timing */ 673 if (of_property_read_u32(node, "solomon,dclk-div", &par->dclk_div)) 674 par->dclk_div = par->device_info->default_dclk_div; 675 if (of_property_read_u32(node, "solomon,dclk-frq", &par->dclk_frq)) 676 par->dclk_frq = par->device_info->default_dclk_frq; 677 678 vmem_size = DIV_ROUND_UP(par->width, 8) * par->height; 679 680 vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 681 get_order(vmem_size)); 682 if (!vmem) { 683 dev_err(&client->dev, "Couldn't allocate graphical memory.\n"); 684 ret = -ENOMEM; 685 goto fb_alloc_error; 686 } 687 688 ssd1307fb_defio = devm_kzalloc(&client->dev, sizeof(*ssd1307fb_defio), 689 GFP_KERNEL); 690 if (!ssd1307fb_defio) { 691 dev_err(&client->dev, "Couldn't allocate deferred io.\n"); 692 ret = -ENOMEM; 693 goto fb_alloc_error; 694 } 695 696 ssd1307fb_defio->delay = HZ / refreshrate; 697 ssd1307fb_defio->deferred_io = ssd1307fb_deferred_io; 698 699 info->fbops = &ssd1307fb_ops; 700 info->fix = ssd1307fb_fix; 701 info->fix.line_length = DIV_ROUND_UP(par->width, 8); 702 info->fbdefio = ssd1307fb_defio; 703 704 info->var = ssd1307fb_var; 705 info->var.xres = par->width; 706 info->var.xres_virtual = par->width; 707 info->var.yres = par->height; 708 info->var.yres_virtual = par->height; 709 710 info->screen_buffer = vmem; 711 info->fix.smem_start = __pa(vmem); 712 info->fix.smem_len = vmem_size; 713 714 fb_deferred_io_init(info); 715 716 i2c_set_clientdata(client, info); 717 718 if (par->reset) { 719 /* Reset the screen */ 720 gpiod_set_value_cansleep(par->reset, 1); 721 udelay(4); 722 gpiod_set_value_cansleep(par->reset, 0); 723 udelay(4); 724 } 725 726 if (par->vbat_reg) { 727 ret = regulator_enable(par->vbat_reg); 728 if (ret) { 729 dev_err(&client->dev, "failed to enable VBAT: %d\n", 730 ret); 731 goto reset_oled_error; 732 } 733 } 734 735 ret = ssd1307fb_init(par); 736 if (ret) 737 goto regulator_enable_error; 738 739 ret = register_framebuffer(info); 740 if (ret) { 741 dev_err(&client->dev, "Couldn't register the framebuffer\n"); 742 goto panel_init_error; 743 } 744 745 snprintf(bl_name, sizeof(bl_name), "ssd1307fb%d", info->node); 746 bl = backlight_device_register(bl_name, &client->dev, par, 747 &ssd1307fb_bl_ops, NULL); 748 if (IS_ERR(bl)) { 749 ret = PTR_ERR(bl); 750 dev_err(&client->dev, "unable to register backlight device: %d\n", 751 ret); 752 goto bl_init_error; 753 } 754 755 bl->props.brightness = par->contrast; 756 bl->props.max_brightness = MAX_CONTRAST; 757 info->bl_dev = bl; 758 759 dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size); 760 761 return 0; 762 763 bl_init_error: 764 unregister_framebuffer(info); 765 panel_init_error: 766 if (par->device_info->need_pwm) { 767 pwm_disable(par->pwm); 768 pwm_put(par->pwm); 769 } 770 regulator_enable_error: 771 if (par->vbat_reg) 772 regulator_disable(par->vbat_reg); 773 reset_oled_error: 774 fb_deferred_io_cleanup(info); 775 fb_alloc_error: 776 framebuffer_release(info); 777 return ret; 778 } 779 780 static int ssd1307fb_remove(struct i2c_client *client) 781 { 782 struct fb_info *info = i2c_get_clientdata(client); 783 struct ssd1307fb_par *par = info->par; 784 785 ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF); 786 787 backlight_device_unregister(info->bl_dev); 788 789 unregister_framebuffer(info); 790 if (par->device_info->need_pwm) { 791 pwm_disable(par->pwm); 792 pwm_put(par->pwm); 793 } 794 if (par->vbat_reg) 795 regulator_disable(par->vbat_reg); 796 fb_deferred_io_cleanup(info); 797 __free_pages(__va(info->fix.smem_start), get_order(info->fix.smem_len)); 798 framebuffer_release(info); 799 800 return 0; 801 } 802 803 static const struct i2c_device_id ssd1307fb_i2c_id[] = { 804 { "ssd1305fb", 0 }, 805 { "ssd1306fb", 0 }, 806 { "ssd1307fb", 0 }, 807 { "ssd1309fb", 0 }, 808 { } 809 }; 810 MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id); 811 812 static struct i2c_driver ssd1307fb_driver = { 813 .probe = ssd1307fb_probe, 814 .remove = ssd1307fb_remove, 815 .id_table = ssd1307fb_i2c_id, 816 .driver = { 817 .name = "ssd1307fb", 818 .of_match_table = ssd1307fb_of_match, 819 }, 820 }; 821 822 module_i2c_driver(ssd1307fb_driver); 823 824 MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controller"); 825 MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); 826 MODULE_LICENSE("GPL"); 827