1 /* drivers/video/s1d13xxxfb.c 2 * 3 * (c) 2004 Simtec Electronics 4 * (c) 2005 Thibaut VARENE <varenet@parisc-linux.org> 5 * (c) 2009 Kristoffer Ericson <kristoffer.ericson@gmail.com> 6 * 7 * Driver for Epson S1D13xxx series framebuffer chips 8 * 9 * Adapted from 10 * linux/drivers/video/skeletonfb.c 11 * linux/drivers/video/epson1355fb.c 12 * linux/drivers/video/epson/s1d13xxxfb.c (2.4 driver by Epson) 13 * 14 * TODO: - handle dual screen display (CRT and LCD at the same time). 15 * - check_var(), mode change, etc. 16 * - probably not SMP safe :) 17 * - support all bitblt operations on all cards 18 * 19 * This file is subject to the terms and conditions of the GNU General Public 20 * License. See the file COPYING in the main directory of this archive for 21 * more details. 22 */ 23 24 #include <linux/module.h> 25 #include <linux/platform_device.h> 26 #include <linux/delay.h> 27 #include <linux/types.h> 28 #include <linux/errno.h> 29 #include <linux/mm.h> 30 #include <linux/mman.h> 31 #include <linux/fb.h> 32 #include <linux/spinlock_types.h> 33 #include <linux/spinlock.h> 34 #include <linux/slab.h> 35 #include <linux/io.h> 36 37 #include <video/s1d13xxxfb.h> 38 39 #define PFX "s1d13xxxfb: " 40 #define BLIT "s1d13xxxfb_bitblt: " 41 42 /* 43 * set this to enable debugging on general functions 44 */ 45 #if 0 46 #define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0) 47 #else 48 #define dbg(fmt, args...) do { no_printk(KERN_INFO fmt, ## args); } while (0) 49 #endif 50 51 /* 52 * set this to enable debugging on 2D acceleration 53 */ 54 #if 0 55 #define dbg_blit(fmt, args...) do { printk(KERN_INFO BLIT fmt, ## args); } while (0) 56 #else 57 #define dbg_blit(fmt, args...) do { } while (0) 58 #endif 59 60 /* 61 * we make sure only one bitblt operation is running 62 */ 63 static DEFINE_SPINLOCK(s1d13xxxfb_bitblt_lock); 64 65 /* 66 * list of card production ids 67 */ 68 static const int s1d13xxxfb_prod_ids[] = { 69 S1D13505_PROD_ID, 70 S1D13506_PROD_ID, 71 S1D13806_PROD_ID, 72 }; 73 74 /* 75 * List of card strings 76 */ 77 static const char *s1d13xxxfb_prod_names[] = { 78 "S1D13505", 79 "S1D13506", 80 "S1D13806", 81 }; 82 83 /* 84 * here we define the default struct fb_fix_screeninfo 85 */ 86 static const struct fb_fix_screeninfo s1d13xxxfb_fix = { 87 .id = S1D_FBID, 88 .type = FB_TYPE_PACKED_PIXELS, 89 .visual = FB_VISUAL_PSEUDOCOLOR, 90 .xpanstep = 0, 91 .ypanstep = 1, 92 .ywrapstep = 0, 93 .accel = FB_ACCEL_NONE, 94 }; 95 96 static inline u8 97 s1d13xxxfb_readreg(struct s1d13xxxfb_par *par, u16 regno) 98 { 99 return readb(par->regs + regno); 100 } 101 102 static inline void 103 s1d13xxxfb_writereg(struct s1d13xxxfb_par *par, u16 regno, u8 value) 104 { 105 writeb(value, par->regs + regno); 106 } 107 108 static inline void 109 s1d13xxxfb_runinit(struct s1d13xxxfb_par *par, 110 const struct s1d13xxxfb_regval *initregs, 111 const unsigned int size) 112 { 113 int i; 114 115 for (i = 0; i < size; i++) { 116 if ((initregs[i].addr == S1DREG_DELAYOFF) || 117 (initregs[i].addr == S1DREG_DELAYON)) 118 mdelay((int)initregs[i].value); 119 else { 120 s1d13xxxfb_writereg(par, initregs[i].addr, initregs[i].value); 121 } 122 } 123 124 /* make sure the hardware can cope with us */ 125 mdelay(1); 126 } 127 128 static inline void 129 lcd_enable(struct s1d13xxxfb_par *par, int enable) 130 { 131 u8 mode = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE); 132 133 if (enable) 134 mode |= 0x01; 135 else 136 mode &= ~0x01; 137 138 s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode); 139 } 140 141 static inline void 142 crt_enable(struct s1d13xxxfb_par *par, int enable) 143 { 144 u8 mode = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE); 145 146 if (enable) 147 mode |= 0x02; 148 else 149 mode &= ~0x02; 150 151 s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode); 152 } 153 154 155 /************************************************************* 156 framebuffer control functions 157 *************************************************************/ 158 static inline void 159 s1d13xxxfb_setup_pseudocolour(struct fb_info *info) 160 { 161 info->fix.visual = FB_VISUAL_PSEUDOCOLOR; 162 163 info->var.red.length = 4; 164 info->var.green.length = 4; 165 info->var.blue.length = 4; 166 } 167 168 static inline void 169 s1d13xxxfb_setup_truecolour(struct fb_info *info) 170 { 171 info->fix.visual = FB_VISUAL_TRUECOLOR; 172 info->var.bits_per_pixel = 16; 173 174 info->var.red.length = 5; 175 info->var.red.offset = 11; 176 177 info->var.green.length = 6; 178 info->var.green.offset = 5; 179 180 info->var.blue.length = 5; 181 info->var.blue.offset = 0; 182 } 183 184 /** 185 * s1d13xxxfb_set_par - Alters the hardware state. 186 * @info: frame buffer structure 187 * 188 * Using the fb_var_screeninfo in fb_info we set the depth of the 189 * framebuffer. This function alters the par AND the 190 * fb_fix_screeninfo stored in fb_info. It doesn't not alter var in 191 * fb_info since we are using that data. This means we depend on the 192 * data in var inside fb_info to be supported by the hardware. 193 * xxxfb_check_var is always called before xxxfb_set_par to ensure this. 194 * 195 * XXX TODO: write proper s1d13xxxfb_check_var(), without which that 196 * function is quite useless. 197 */ 198 static int 199 s1d13xxxfb_set_par(struct fb_info *info) 200 { 201 struct s1d13xxxfb_par *s1dfb = info->par; 202 unsigned int val; 203 204 dbg("s1d13xxxfb_set_par: bpp=%d\n", info->var.bits_per_pixel); 205 206 if ((s1dfb->display & 0x01)) /* LCD */ 207 val = s1d13xxxfb_readreg(s1dfb, S1DREG_LCD_DISP_MODE); /* read colour control */ 208 else /* CRT */ 209 val = s1d13xxxfb_readreg(s1dfb, S1DREG_CRT_DISP_MODE); /* read colour control */ 210 211 val &= ~0x07; 212 213 switch (info->var.bits_per_pixel) { 214 case 4: 215 dbg("pseudo colour 4\n"); 216 s1d13xxxfb_setup_pseudocolour(info); 217 val |= 2; 218 break; 219 case 8: 220 dbg("pseudo colour 8\n"); 221 s1d13xxxfb_setup_pseudocolour(info); 222 val |= 3; 223 break; 224 case 16: 225 dbg("true colour\n"); 226 s1d13xxxfb_setup_truecolour(info); 227 val |= 5; 228 break; 229 230 default: 231 dbg("bpp not supported!\n"); 232 return -EINVAL; 233 } 234 235 dbg("writing %02x to display mode register\n", val); 236 237 if ((s1dfb->display & 0x01)) /* LCD */ 238 s1d13xxxfb_writereg(s1dfb, S1DREG_LCD_DISP_MODE, val); 239 else /* CRT */ 240 s1d13xxxfb_writereg(s1dfb, S1DREG_CRT_DISP_MODE, val); 241 242 info->fix.line_length = info->var.xres * info->var.bits_per_pixel; 243 info->fix.line_length /= 8; 244 245 dbg("setting line_length to %d\n", info->fix.line_length); 246 247 dbg("done setup\n"); 248 249 return 0; 250 } 251 252 /** 253 * s1d13xxxfb_setcolreg - sets a color register. 254 * @regno: Which register in the CLUT we are programming 255 * @red: The red value which can be up to 16 bits wide 256 * @green: The green value which can be up to 16 bits wide 257 * @blue: The blue value which can be up to 16 bits wide. 258 * @transp: If supported the alpha value which can be up to 16 bits wide. 259 * @info: frame buffer info structure 260 * 261 * Returns negative errno on error, or zero on success. 262 */ 263 static int 264 s1d13xxxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 265 u_int transp, struct fb_info *info) 266 { 267 struct s1d13xxxfb_par *s1dfb = info->par; 268 unsigned int pseudo_val; 269 270 if (regno >= S1D_PALETTE_SIZE) 271 return -EINVAL; 272 273 dbg("s1d13xxxfb_setcolreg: %d: rgb=%d,%d,%d, tr=%d\n", 274 regno, red, green, blue, transp); 275 276 if (info->var.grayscale) 277 red = green = blue = (19595*red + 38470*green + 7471*blue) >> 16; 278 279 switch (info->fix.visual) { 280 case FB_VISUAL_TRUECOLOR: 281 if (regno >= 16) 282 return -EINVAL; 283 284 /* deal with creating pseudo-palette entries */ 285 286 pseudo_val = (red >> 11) << info->var.red.offset; 287 pseudo_val |= (green >> 10) << info->var.green.offset; 288 pseudo_val |= (blue >> 11) << info->var.blue.offset; 289 290 dbg("s1d13xxxfb_setcolreg: pseudo %d, val %08x\n", 291 regno, pseudo_val); 292 293 ((u32 *)info->pseudo_palette)[regno] = pseudo_val; 294 295 break; 296 case FB_VISUAL_PSEUDOCOLOR: 297 s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_ADDR, regno); 298 s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, red); 299 s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, green); 300 s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, blue); 301 302 break; 303 default: 304 return -ENOSYS; 305 } 306 307 dbg("s1d13xxxfb_setcolreg: done\n"); 308 309 return 0; 310 } 311 312 /** 313 * s1d13xxxfb_blank - blanks the display. 314 * @blank_mode: the blank mode we want. 315 * @info: frame buffer structure that represents a single frame buffer 316 * 317 * Blank the screen if blank_mode != 0, else unblank. Return 0 if 318 * blanking succeeded, != 0 if un-/blanking failed due to e.g. a 319 * video mode which doesn't support it. Implements VESA suspend 320 * and powerdown modes on hardware that supports disabling hsync/vsync: 321 * blank_mode == 2: suspend vsync 322 * blank_mode == 3: suspend hsync 323 * blank_mode == 4: powerdown 324 * 325 * Returns negative errno on error, or zero on success. 326 */ 327 static int 328 s1d13xxxfb_blank(int blank_mode, struct fb_info *info) 329 { 330 struct s1d13xxxfb_par *par = info->par; 331 332 dbg("s1d13xxxfb_blank: blank=%d, info=%p\n", blank_mode, info); 333 334 switch (blank_mode) { 335 case FB_BLANK_UNBLANK: 336 case FB_BLANK_NORMAL: 337 if ((par->display & 0x01) != 0) 338 lcd_enable(par, 1); 339 if ((par->display & 0x02) != 0) 340 crt_enable(par, 1); 341 break; 342 case FB_BLANK_VSYNC_SUSPEND: 343 case FB_BLANK_HSYNC_SUSPEND: 344 break; 345 case FB_BLANK_POWERDOWN: 346 lcd_enable(par, 0); 347 crt_enable(par, 0); 348 break; 349 default: 350 return -EINVAL; 351 } 352 353 /* let fbcon do a soft blank for us */ 354 return ((blank_mode == FB_BLANK_NORMAL) ? 1 : 0); 355 } 356 357 /** 358 * s1d13xxxfb_pan_display - Pans the display. 359 * @var: frame buffer variable screen structure 360 * @info: frame buffer structure that represents a single frame buffer 361 * 362 * Pan (or wrap, depending on the `vmode' field) the display using the 363 * `yoffset' field of the `var' structure (`xoffset' not yet supported). 364 * If the values don't fit, return -EINVAL. 365 * 366 * Returns negative errno on error, or zero on success. 367 */ 368 static int 369 s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) 370 { 371 struct s1d13xxxfb_par *par = info->par; 372 u32 start; 373 374 if (var->xoffset != 0) /* not yet ... */ 375 return -EINVAL; 376 377 if (var->yoffset + info->var.yres > info->var.yres_virtual) 378 return -EINVAL; 379 380 start = (info->fix.line_length >> 1) * var->yoffset; 381 382 if ((par->display & 0x01)) { 383 /* LCD */ 384 s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START0, (start & 0xff)); 385 s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START1, ((start >> 8) & 0xff)); 386 s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START2, ((start >> 16) & 0x0f)); 387 } else { 388 /* CRT */ 389 s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START0, (start & 0xff)); 390 s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START1, ((start >> 8) & 0xff)); 391 s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START2, ((start >> 16) & 0x0f)); 392 } 393 394 return 0; 395 } 396 397 /************************************************************ 398 functions to handle bitblt acceleration 399 ************************************************************/ 400 401 /** 402 * bltbit_wait_bitclear - waits for change in register value 403 * @info : frambuffer structure 404 * @bit : value currently in register 405 * @timeout : ... 406 * 407 * waits until value changes FROM bit 408 * 409 */ 410 static u8 411 bltbit_wait_bitclear(struct fb_info *info, u8 bit, int timeout) 412 { 413 while (s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit) { 414 udelay(10); 415 if (!--timeout) { 416 dbg_blit("wait_bitclear timeout\n"); 417 break; 418 } 419 } 420 421 return timeout; 422 } 423 424 /* 425 * s1d13xxxfb_bitblt_copyarea - accelerated copyarea function 426 * @info : framebuffer structure 427 * @area : fb_copyarea structure 428 * 429 * supports (atleast) S1D13506 430 * 431 */ 432 static void 433 s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area) 434 { 435 u32 dst, src; 436 u32 stride; 437 u16 reverse = 0; 438 u16 sx = area->sx, sy = area->sy; 439 u16 dx = area->dx, dy = area->dy; 440 u16 width = area->width, height = area->height; 441 u16 bpp; 442 443 spin_lock(&s1d13xxxfb_bitblt_lock); 444 445 /* bytes per xres line */ 446 bpp = (info->var.bits_per_pixel >> 3); 447 stride = bpp * info->var.xres; 448 449 /* reverse, calculate the last pixel in rectangle */ 450 if ((dy > sy) || ((dy == sy) && (dx >= sx))) { 451 dst = (((dy + height - 1) * stride) + (bpp * (dx + width - 1))); 452 src = (((sy + height - 1) * stride) + (bpp * (sx + width - 1))); 453 reverse = 1; 454 /* not reverse, calculate the first pixel in rectangle */ 455 } else { /* (y * xres) + (bpp * x) */ 456 dst = (dy * stride) + (bpp * dx); 457 src = (sy * stride) + (bpp * sx); 458 } 459 460 /* set source address */ 461 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff)); 462 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff); 463 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff); 464 465 /* set destination address */ 466 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff)); 467 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff); 468 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff); 469 470 /* program height and width */ 471 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, (width & 0xff) - 1); 472 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (width >> 8)); 473 474 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, (height & 0xff) - 1); 475 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (height >> 8)); 476 477 /* negative direction ROP */ 478 if (reverse == 1) { 479 dbg_blit("(copyarea) negative rop\n"); 480 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x03); 481 } else /* positive direction ROP */ { 482 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x02); 483 dbg_blit("(copyarea) positive rop\n"); 484 } 485 486 /* set for rectangel mode and not linear */ 487 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0); 488 489 /* setup the bpp 1 = 16bpp, 0 = 8bpp*/ 490 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (bpp >> 1)); 491 492 /* set words per xres */ 493 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (stride >> 1) & 0xff); 494 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (stride >> 9)); 495 496 dbg_blit("(copyarea) dx=%d, dy=%d\n", dx, dy); 497 dbg_blit("(copyarea) sx=%d, sy=%d\n", sx, sy); 498 dbg_blit("(copyarea) width=%d, height=%d\n", width - 1, height - 1); 499 dbg_blit("(copyarea) stride=%d\n", stride); 500 dbg_blit("(copyarea) bpp=%d=0x0%d, mem_offset1=%d, mem_offset2=%d\n", bpp, (bpp >> 1), 501 (stride >> 1) & 0xff, stride >> 9); 502 503 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CC_EXP, 0x0c); 504 505 /* initialize the engine */ 506 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80); 507 508 /* wait to complete */ 509 bltbit_wait_bitclear(info, 0x80, 8000); 510 511 spin_unlock(&s1d13xxxfb_bitblt_lock); 512 } 513 514 /** 515 * s1d13xxxfb_bitblt_solidfill - accelerated solidfill function 516 * @info : framebuffer structure 517 * @rect : fb_fillrect structure 518 * 519 * supports (atleast 13506) 520 * 521 **/ 522 static void 523 s1d13xxxfb_bitblt_solidfill(struct fb_info *info, const struct fb_fillrect *rect) 524 { 525 u32 screen_stride, dest; 526 u32 fg; 527 u16 bpp = (info->var.bits_per_pixel >> 3); 528 529 /* grab spinlock */ 530 spin_lock(&s1d13xxxfb_bitblt_lock); 531 532 /* bytes per x width */ 533 screen_stride = (bpp * info->var.xres); 534 535 /* bytes to starting point */ 536 dest = ((rect->dy * screen_stride) + (bpp * rect->dx)); 537 538 dbg_blit("(solidfill) dx=%d, dy=%d, stride=%d, dest=%d\n" 539 "(solidfill) : rect_width=%d, rect_height=%d\n", 540 rect->dx, rect->dy, screen_stride, dest, 541 rect->width - 1, rect->height - 1); 542 543 dbg_blit("(solidfill) : xres=%d, yres=%d, bpp=%d\n", 544 info->var.xres, info->var.yres, 545 info->var.bits_per_pixel); 546 dbg_blit("(solidfill) : rop=%d\n", rect->rop); 547 548 /* We split the destination into the three registers */ 549 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dest & 0x00ff)); 550 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, ((dest >> 8) & 0x00ff)); 551 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, ((dest >> 16) & 0x00ff)); 552 553 /* give information regarding rectangel width */ 554 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, ((rect->width) & 0x00ff) - 1); 555 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (rect->width >> 8)); 556 557 /* give information regarding rectangel height */ 558 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, ((rect->height) & 0x00ff) - 1); 559 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (rect->height >> 8)); 560 561 if (info->fix.visual == FB_VISUAL_TRUECOLOR || 562 info->fix.visual == FB_VISUAL_DIRECTCOLOR) { 563 fg = ((u32 *)info->pseudo_palette)[rect->color]; 564 dbg_blit("(solidfill) truecolor/directcolor\n"); 565 dbg_blit("(solidfill) pseudo_palette[%d] = %d\n", rect->color, fg); 566 } else { 567 fg = rect->color; 568 dbg_blit("(solidfill) color = %d\n", rect->color); 569 } 570 571 /* set foreground color */ 572 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC0, (fg & 0xff)); 573 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC1, (fg >> 8) & 0xff); 574 575 /* set rectangual region of memory (rectangle and not linear) */ 576 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0); 577 578 /* set operation mode SOLID_FILL */ 579 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, BBLT_SOLID_FILL); 580 581 /* set bits per pixel (1 = 16bpp, 0 = 8bpp) */ 582 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (info->var.bits_per_pixel >> 4)); 583 584 /* set the memory offset for the bblt in word sizes */ 585 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (screen_stride >> 1) & 0x00ff); 586 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (screen_stride >> 9)); 587 588 /* and away we go.... */ 589 s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80); 590 591 /* wait until its done */ 592 bltbit_wait_bitclear(info, 0x80, 8000); 593 594 /* let others play */ 595 spin_unlock(&s1d13xxxfb_bitblt_lock); 596 } 597 598 /* framebuffer information structures */ 599 static struct fb_ops s1d13xxxfb_fbops = { 600 .owner = THIS_MODULE, 601 .fb_set_par = s1d13xxxfb_set_par, 602 .fb_setcolreg = s1d13xxxfb_setcolreg, 603 .fb_blank = s1d13xxxfb_blank, 604 605 .fb_pan_display = s1d13xxxfb_pan_display, 606 607 /* gets replaced at chip detection time */ 608 .fb_fillrect = cfb_fillrect, 609 .fb_copyarea = cfb_copyarea, 610 .fb_imageblit = cfb_imageblit, 611 }; 612 613 static int s1d13xxxfb_width_tab[2][4] = { 614 {4, 8, 16, -1}, 615 {9, 12, 18, -1}, 616 }; 617 618 /** 619 * s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to 620 * hardware setup. 621 * @info: frame buffer structure 622 * 623 * We setup the framebuffer structures according to the current 624 * hardware setup. On some machines, the BIOS will have filled 625 * the chip registers with such info, on others, these values will 626 * have been written in some init procedure. In any case, the 627 * software values needs to match the hardware ones. This is what 628 * this function ensures. 629 * 630 * Note: some of the hardcoded values here might need some love to 631 * work on various chips, and might need to no longer be hardcoded. 632 */ 633 static void s1d13xxxfb_fetch_hw_state(struct fb_info *info) 634 { 635 struct fb_var_screeninfo *var = &info->var; 636 struct fb_fix_screeninfo *fix = &info->fix; 637 struct s1d13xxxfb_par *par = info->par; 638 u8 panel, display; 639 u16 offset; 640 u32 xres, yres; 641 u32 xres_virtual, yres_virtual; 642 int bpp, lcd_bpp; 643 int is_color, is_dual, is_tft; 644 int lcd_enabled, crt_enabled; 645 646 fix->type = FB_TYPE_PACKED_PIXELS; 647 648 /* general info */ 649 par->display = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE); 650 crt_enabled = (par->display & 0x02) != 0; 651 lcd_enabled = (par->display & 0x01) != 0; 652 653 if (lcd_enabled && crt_enabled) 654 printk(KERN_WARNING PFX "Warning: LCD and CRT detected, using LCD\n"); 655 656 if (lcd_enabled) 657 display = s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_MODE); 658 else /* CRT */ 659 display = s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_MODE); 660 661 bpp = display & 0x07; 662 663 switch (bpp) { 664 case 2: /* 4 bpp */ 665 case 3: /* 8 bpp */ 666 var->bits_per_pixel = 8; 667 var->red.offset = var->green.offset = var->blue.offset = 0; 668 var->red.length = var->green.length = var->blue.length = 8; 669 break; 670 case 5: /* 16 bpp */ 671 s1d13xxxfb_setup_truecolour(info); 672 break; 673 default: 674 dbg("bpp: %i\n", bpp); 675 } 676 fb_alloc_cmap(&info->cmap, 256, 0); 677 678 /* LCD info */ 679 panel = s1d13xxxfb_readreg(par, S1DREG_PANEL_TYPE); 680 is_color = (panel & 0x04) != 0; 681 is_dual = (panel & 0x02) != 0; 682 is_tft = (panel & 0x01) != 0; 683 lcd_bpp = s1d13xxxfb_width_tab[is_tft][(panel >> 4) & 3]; 684 685 if (lcd_enabled) { 686 xres = (s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_HWIDTH) + 1) * 8; 687 yres = (s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_VHEIGHT0) + 688 ((s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_VHEIGHT1) & 0x03) << 8) + 1); 689 690 offset = (s1d13xxxfb_readreg(par, S1DREG_LCD_MEM_OFF0) + 691 ((s1d13xxxfb_readreg(par, S1DREG_LCD_MEM_OFF1) & 0x7) << 8)); 692 } else { /* crt */ 693 xres = (s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_HWIDTH) + 1) * 8; 694 yres = (s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_VHEIGHT0) + 695 ((s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_VHEIGHT1) & 0x03) << 8) + 1); 696 697 offset = (s1d13xxxfb_readreg(par, S1DREG_CRT_MEM_OFF0) + 698 ((s1d13xxxfb_readreg(par, S1DREG_CRT_MEM_OFF1) & 0x7) << 8)); 699 } 700 xres_virtual = offset * 16 / var->bits_per_pixel; 701 yres_virtual = fix->smem_len / (offset * 2); 702 703 var->xres = xres; 704 var->yres = yres; 705 var->xres_virtual = xres_virtual; 706 var->yres_virtual = yres_virtual; 707 var->xoffset = var->yoffset = 0; 708 709 fix->line_length = offset * 2; 710 711 var->grayscale = !is_color; 712 713 var->activate = FB_ACTIVATE_NOW; 714 715 dbg(PFX "bpp=%d, lcd_bpp=%d, " 716 "crt_enabled=%d, lcd_enabled=%d\n", 717 var->bits_per_pixel, lcd_bpp, crt_enabled, lcd_enabled); 718 dbg(PFX "xres=%d, yres=%d, vxres=%d, vyres=%d " 719 "is_color=%d, is_dual=%d, is_tft=%d\n", 720 xres, yres, xres_virtual, yres_virtual, is_color, is_dual, is_tft); 721 } 722 723 static void __s1d13xxxfb_remove(struct platform_device *pdev) 724 { 725 struct fb_info *info = platform_get_drvdata(pdev); 726 struct s1d13xxxfb_par *par = NULL; 727 728 if (info) { 729 par = info->par; 730 if (par && par->regs) { 731 /* disable output & enable powersave */ 732 s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, 0x00); 733 s1d13xxxfb_writereg(par, S1DREG_PS_CNF, 0x11); 734 iounmap(par->regs); 735 } 736 737 fb_dealloc_cmap(&info->cmap); 738 739 if (info->screen_base) 740 iounmap(info->screen_base); 741 742 framebuffer_release(info); 743 } 744 745 release_mem_region(pdev->resource[0].start, 746 resource_size(&pdev->resource[0])); 747 release_mem_region(pdev->resource[1].start, 748 resource_size(&pdev->resource[1])); 749 } 750 751 static void s1d13xxxfb_remove(struct platform_device *pdev) 752 { 753 struct fb_info *info = platform_get_drvdata(pdev); 754 755 unregister_framebuffer(info); 756 __s1d13xxxfb_remove(pdev); 757 } 758 759 static int s1d13xxxfb_probe(struct platform_device *pdev) 760 { 761 struct s1d13xxxfb_par *default_par; 762 struct fb_info *info; 763 struct s1d13xxxfb_pdata *pdata = NULL; 764 int ret = 0; 765 int i; 766 u8 revision, prod_id; 767 768 dbg("probe called: device is %p\n", pdev); 769 770 printk(KERN_INFO "Epson S1D13XXX FB Driver\n"); 771 772 /* enable platform-dependent hardware glue, if any */ 773 if (dev_get_platdata(&pdev->dev)) 774 pdata = dev_get_platdata(&pdev->dev); 775 776 if (pdata && pdata->platform_init_video) 777 pdata->platform_init_video(); 778 779 if (pdev->num_resources != 2) { 780 dev_err(&pdev->dev, "invalid num_resources: %i\n", 781 pdev->num_resources); 782 ret = -ENODEV; 783 goto bail; 784 } 785 786 /* resource[0] is VRAM, resource[1] is registers */ 787 if (pdev->resource[0].flags != IORESOURCE_MEM 788 || pdev->resource[1].flags != IORESOURCE_MEM) { 789 dev_err(&pdev->dev, "invalid resource type\n"); 790 ret = -ENODEV; 791 goto bail; 792 } 793 794 if (!request_mem_region(pdev->resource[0].start, 795 resource_size(&pdev->resource[0]), "s1d13xxxfb mem")) { 796 dev_dbg(&pdev->dev, "request_mem_region failed\n"); 797 ret = -EBUSY; 798 goto bail; 799 } 800 801 if (!request_mem_region(pdev->resource[1].start, 802 resource_size(&pdev->resource[1]), "s1d13xxxfb regs")) { 803 dev_dbg(&pdev->dev, "request_mem_region failed\n"); 804 ret = -EBUSY; 805 goto bail; 806 } 807 808 info = framebuffer_alloc(sizeof(struct s1d13xxxfb_par) + sizeof(u32) * 256, &pdev->dev); 809 if (!info) { 810 ret = -ENOMEM; 811 goto bail; 812 } 813 814 platform_set_drvdata(pdev, info); 815 default_par = info->par; 816 default_par->regs = ioremap(pdev->resource[1].start, 817 resource_size(&pdev->resource[1])); 818 if (!default_par->regs) { 819 printk(KERN_ERR PFX "unable to map registers\n"); 820 ret = -ENOMEM; 821 goto bail; 822 } 823 info->pseudo_palette = default_par->pseudo_palette; 824 825 info->screen_base = ioremap(pdev->resource[0].start, 826 resource_size(&pdev->resource[0])); 827 828 if (!info->screen_base) { 829 printk(KERN_ERR PFX "unable to map framebuffer\n"); 830 ret = -ENOMEM; 831 goto bail; 832 } 833 834 /* production id is top 6 bits */ 835 prod_id = s1d13xxxfb_readreg(default_par, S1DREG_REV_CODE) >> 2; 836 /* revision id is lower 2 bits */ 837 revision = s1d13xxxfb_readreg(default_par, S1DREG_REV_CODE) & 0x3; 838 ret = -ENODEV; 839 840 for (i = 0; i < ARRAY_SIZE(s1d13xxxfb_prod_ids); i++) { 841 if (prod_id == s1d13xxxfb_prod_ids[i]) { 842 /* looks like we got it in our list */ 843 default_par->prod_id = prod_id; 844 default_par->revision = revision; 845 ret = 0; 846 break; 847 } 848 } 849 850 if (!ret) { 851 printk(KERN_INFO PFX "chip production id %i = %s\n", 852 prod_id, s1d13xxxfb_prod_names[i]); 853 printk(KERN_INFO PFX "chip revision %i\n", revision); 854 } else { 855 printk(KERN_INFO PFX 856 "unknown chip production id %i, revision %i\n", 857 prod_id, revision); 858 printk(KERN_INFO PFX "please contact maintainer\n"); 859 goto bail; 860 } 861 862 info->fix = s1d13xxxfb_fix; 863 info->fix.mmio_start = pdev->resource[1].start; 864 info->fix.mmio_len = resource_size(&pdev->resource[1]); 865 info->fix.smem_start = pdev->resource[0].start; 866 info->fix.smem_len = resource_size(&pdev->resource[0]); 867 868 printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n", 869 default_par->regs, info->fix.smem_len / 1024, info->screen_base); 870 871 info->par = default_par; 872 info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; 873 info->fbops = &s1d13xxxfb_fbops; 874 875 switch(prod_id) { 876 case S1D13506_PROD_ID: /* activate acceleration */ 877 s1d13xxxfb_fbops.fb_fillrect = s1d13xxxfb_bitblt_solidfill; 878 s1d13xxxfb_fbops.fb_copyarea = s1d13xxxfb_bitblt_copyarea; 879 info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | 880 FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA; 881 break; 882 default: 883 break; 884 } 885 886 /* perform "manual" chip initialization, if needed */ 887 if (pdata && pdata->initregs) 888 s1d13xxxfb_runinit(info->par, pdata->initregs, pdata->initregssize); 889 890 s1d13xxxfb_fetch_hw_state(info); 891 892 if (register_framebuffer(info) < 0) { 893 ret = -EINVAL; 894 goto bail; 895 } 896 897 fb_info(info, "%s frame buffer device\n", info->fix.id); 898 899 return 0; 900 901 bail: 902 __s1d13xxxfb_remove(pdev); 903 return ret; 904 905 } 906 907 #ifdef CONFIG_PM 908 static int s1d13xxxfb_suspend(struct platform_device *dev, pm_message_t state) 909 { 910 struct fb_info *info = platform_get_drvdata(dev); 911 struct s1d13xxxfb_par *s1dfb = info->par; 912 struct s1d13xxxfb_pdata *pdata = NULL; 913 914 /* disable display */ 915 lcd_enable(s1dfb, 0); 916 crt_enable(s1dfb, 0); 917 918 if (dev_get_platdata(&dev->dev)) 919 pdata = dev_get_platdata(&dev->dev); 920 921 #if 0 922 if (!s1dfb->disp_save) 923 s1dfb->disp_save = kmalloc(info->fix.smem_len, GFP_KERNEL); 924 925 if (!s1dfb->disp_save) { 926 printk(KERN_ERR PFX "no memory to save screen\n"); 927 return -ENOMEM; 928 } 929 930 memcpy_fromio(s1dfb->disp_save, info->screen_base, info->fix.smem_len); 931 #else 932 s1dfb->disp_save = NULL; 933 #endif 934 935 if (!s1dfb->regs_save) 936 s1dfb->regs_save = kmalloc(info->fix.mmio_len, GFP_KERNEL); 937 938 if (!s1dfb->regs_save) { 939 printk(KERN_ERR PFX "no memory to save registers"); 940 return -ENOMEM; 941 } 942 943 /* backup all registers */ 944 memcpy_fromio(s1dfb->regs_save, s1dfb->regs, info->fix.mmio_len); 945 946 /* now activate power save mode */ 947 s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x11); 948 949 if (pdata && pdata->platform_suspend_video) 950 return pdata->platform_suspend_video(); 951 else 952 return 0; 953 } 954 955 static int s1d13xxxfb_resume(struct platform_device *dev) 956 { 957 struct fb_info *info = platform_get_drvdata(dev); 958 struct s1d13xxxfb_par *s1dfb = info->par; 959 struct s1d13xxxfb_pdata *pdata = NULL; 960 961 /* awaken the chip */ 962 s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x10); 963 964 /* do not let go until SDRAM "wakes up" */ 965 while ((s1d13xxxfb_readreg(s1dfb, S1DREG_PS_STATUS) & 0x01)) 966 udelay(10); 967 968 if (dev_get_platdata(&dev->dev)) 969 pdata = dev_get_platdata(&dev->dev); 970 971 if (s1dfb->regs_save) { 972 /* will write RO regs, *should* get away with it :) */ 973 memcpy_toio(s1dfb->regs, s1dfb->regs_save, info->fix.mmio_len); 974 kfree(s1dfb->regs_save); 975 } 976 977 if (s1dfb->disp_save) { 978 memcpy_toio(info->screen_base, s1dfb->disp_save, 979 info->fix.smem_len); 980 kfree(s1dfb->disp_save); /* XXX kmalloc()'d when? */ 981 } 982 983 if ((s1dfb->display & 0x01) != 0) 984 lcd_enable(s1dfb, 1); 985 if ((s1dfb->display & 0x02) != 0) 986 crt_enable(s1dfb, 1); 987 988 if (pdata && pdata->platform_resume_video) 989 return pdata->platform_resume_video(); 990 else 991 return 0; 992 } 993 #endif /* CONFIG_PM */ 994 995 static struct platform_driver s1d13xxxfb_driver = { 996 .probe = s1d13xxxfb_probe, 997 .remove_new = s1d13xxxfb_remove, 998 #ifdef CONFIG_PM 999 .suspend = s1d13xxxfb_suspend, 1000 .resume = s1d13xxxfb_resume, 1001 #endif 1002 .driver = { 1003 .name = S1D_DEVICENAME, 1004 }, 1005 }; 1006 1007 1008 static int __init 1009 s1d13xxxfb_init(void) 1010 { 1011 1012 #ifndef MODULE 1013 if (fb_get_options("s1d13xxxfb", NULL)) 1014 return -ENODEV; 1015 #endif 1016 1017 return platform_driver_register(&s1d13xxxfb_driver); 1018 } 1019 1020 1021 static void __exit 1022 s1d13xxxfb_exit(void) 1023 { 1024 platform_driver_unregister(&s1d13xxxfb_driver); 1025 } 1026 1027 module_init(s1d13xxxfb_init); 1028 module_exit(s1d13xxxfb_exit); 1029 1030 1031 MODULE_LICENSE("GPL"); 1032 MODULE_DESCRIPTION("Framebuffer driver for S1D13xxx devices"); 1033 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Thibaut VARENE <varenet@parisc-linux.org>"); 1034