1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * LCD driver for MIPI DBI-C / DCS compatible LCDs
4  *
5  * Copyright (C) 2006 Nokia Corporation
6  * Author: Imre Deak <imre.deak@nokia.com>
7  */
8 #include <linux/device.h>
9 #include <linux/delay.h>
10 #include <linux/gpio/consumer.h>
11 #include <linux/slab.h>
12 #include <linux/workqueue.h>
13 #include <linux/spi/spi.h>
14 #include <linux/module.h>
15 
16 #include <linux/platform_data/lcd-mipid.h>
17 
18 #include "omapfb.h"
19 
20 #define MIPID_MODULE_NAME		"lcd_mipid"
21 
22 #define MIPID_CMD_READ_DISP_ID		0x04
23 #define MIPID_CMD_READ_RED		0x06
24 #define MIPID_CMD_READ_GREEN		0x07
25 #define MIPID_CMD_READ_BLUE		0x08
26 #define MIPID_CMD_READ_DISP_STATUS	0x09
27 #define MIPID_CMD_RDDSDR		0x0F
28 #define MIPID_CMD_SLEEP_IN		0x10
29 #define MIPID_CMD_SLEEP_OUT		0x11
30 #define MIPID_CMD_DISP_OFF		0x28
31 #define MIPID_CMD_DISP_ON		0x29
32 
33 #define MIPID_ESD_CHECK_PERIOD		msecs_to_jiffies(5000)
34 
35 #define to_mipid_device(p)		container_of(p, struct mipid_device, \
36 						panel)
37 struct mipid_device {
38 	int		enabled;
39 	int		revision;
40 	unsigned int	saved_bklight_level;
41 	unsigned long	hw_guard_end;		/* next value of jiffies
42 						   when we can issue the
43 						   next sleep in/out command */
44 	unsigned long	hw_guard_wait;		/* max guard time in jiffies */
45 	struct gpio_desc	*reset;
46 
47 	struct omapfb_device	*fbdev;
48 	struct spi_device	*spi;
49 	struct mutex		mutex;
50 	struct lcd_panel	panel;
51 
52 	struct delayed_work	esd_work;
53 	void			(*esd_check)(struct mipid_device *m);
54 };
55 
56 static void mipid_transfer(struct mipid_device *md, int cmd, const u8 *wbuf,
57 			   int wlen, u8 *rbuf, int rlen)
58 {
59 	struct spi_message	m;
60 	struct spi_transfer	*x, xfer[4];
61 	u16			w;
62 	int			r;
63 
64 	BUG_ON(md->spi == NULL);
65 
66 	spi_message_init(&m);
67 
68 	memset(xfer, 0, sizeof(xfer));
69 	x = &xfer[0];
70 
71 	cmd &=  0xff;
72 	x->tx_buf		= &cmd;
73 	x->bits_per_word	= 9;
74 	x->len			= 2;
75 	spi_message_add_tail(x, &m);
76 
77 	if (wlen) {
78 		x++;
79 		x->tx_buf		= wbuf;
80 		x->len			= wlen;
81 		x->bits_per_word	= 9;
82 		spi_message_add_tail(x, &m);
83 	}
84 
85 	if (rlen) {
86 		x++;
87 		x->rx_buf	= &w;
88 		x->len		= 1;
89 		spi_message_add_tail(x, &m);
90 
91 		if (rlen > 1) {
92 			/* Arrange for the extra clock before the first
93 			 * data bit.
94 			 */
95 			x->bits_per_word = 9;
96 			x->len		 = 2;
97 
98 			x++;
99 			x->rx_buf	 = &rbuf[1];
100 			x->len		 = rlen - 1;
101 			spi_message_add_tail(x, &m);
102 		}
103 	}
104 
105 	r = spi_sync(md->spi, &m);
106 	if (r < 0)
107 		dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
108 
109 	if (rlen)
110 		rbuf[0] = w & 0xff;
111 }
112 
113 static inline void mipid_cmd(struct mipid_device *md, int cmd)
114 {
115 	mipid_transfer(md, cmd, NULL, 0, NULL, 0);
116 }
117 
118 static inline void mipid_write(struct mipid_device *md,
119 			       int reg, const u8 *buf, int len)
120 {
121 	mipid_transfer(md, reg, buf, len, NULL, 0);
122 }
123 
124 static inline void mipid_read(struct mipid_device *md,
125 			      int reg, u8 *buf, int len)
126 {
127 	mipid_transfer(md, reg, NULL, 0, buf, len);
128 }
129 
130 static void set_data_lines(struct mipid_device *md, int data_lines)
131 {
132 	u16 par;
133 
134 	switch (data_lines) {
135 	case 16:
136 		par = 0x150;
137 		break;
138 	case 18:
139 		par = 0x160;
140 		break;
141 	case 24:
142 		par = 0x170;
143 		break;
144 	}
145 	mipid_write(md, 0x3a, (u8 *)&par, 2);
146 }
147 
148 static void send_init_string(struct mipid_device *md)
149 {
150 	u16 initpar[] = { 0x0102, 0x0100, 0x0100 };
151 
152 	mipid_write(md, 0xc2, (u8 *)initpar, sizeof(initpar));
153 	set_data_lines(md, md->panel.data_lines);
154 }
155 
156 static void hw_guard_start(struct mipid_device *md, int guard_msec)
157 {
158 	md->hw_guard_wait = msecs_to_jiffies(guard_msec);
159 	md->hw_guard_end = jiffies + md->hw_guard_wait;
160 }
161 
162 static void hw_guard_wait(struct mipid_device *md)
163 {
164 	unsigned long wait = md->hw_guard_end - jiffies;
165 
166 	if ((long)wait > 0 && time_before_eq(wait,  md->hw_guard_wait)) {
167 		set_current_state(TASK_UNINTERRUPTIBLE);
168 		schedule_timeout(wait);
169 	}
170 }
171 
172 static void set_sleep_mode(struct mipid_device *md, int on)
173 {
174 	int cmd, sleep_time = 50;
175 
176 	if (on)
177 		cmd = MIPID_CMD_SLEEP_IN;
178 	else
179 		cmd = MIPID_CMD_SLEEP_OUT;
180 	hw_guard_wait(md);
181 	mipid_cmd(md, cmd);
182 	hw_guard_start(md, 120);
183 	/*
184 	 * When we enable the panel, it seems we _have_ to sleep
185 	 * 120 ms before sending the init string. When disabling the
186 	 * panel we'll sleep for the duration of 2 frames, so that the
187 	 * controller can still provide the PCLK,HS,VS signals.
188 	 */
189 	if (!on)
190 		sleep_time = 120;
191 	msleep(sleep_time);
192 }
193 
194 static void set_display_state(struct mipid_device *md, int enabled)
195 {
196 	int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
197 
198 	mipid_cmd(md, cmd);
199 }
200 
201 static int mipid_set_bklight_level(struct lcd_panel *panel, unsigned int level)
202 {
203 	struct mipid_device *md = to_mipid_device(panel);
204 	struct mipid_platform_data *pd = md->spi->dev.platform_data;
205 
206 	if (pd->get_bklight_max == NULL || pd->set_bklight_level == NULL)
207 		return -ENODEV;
208 	if (level > pd->get_bklight_max(pd))
209 		return -EINVAL;
210 	if (!md->enabled) {
211 		md->saved_bklight_level = level;
212 		return 0;
213 	}
214 	pd->set_bklight_level(pd, level);
215 
216 	return 0;
217 }
218 
219 static unsigned int mipid_get_bklight_level(struct lcd_panel *panel)
220 {
221 	struct mipid_device *md = to_mipid_device(panel);
222 	struct mipid_platform_data *pd = md->spi->dev.platform_data;
223 
224 	if (pd->get_bklight_level == NULL)
225 		return -ENODEV;
226 	return pd->get_bklight_level(pd);
227 }
228 
229 static unsigned int mipid_get_bklight_max(struct lcd_panel *panel)
230 {
231 	struct mipid_device *md = to_mipid_device(panel);
232 	struct mipid_platform_data *pd = md->spi->dev.platform_data;
233 
234 	if (pd->get_bklight_max == NULL)
235 		return -ENODEV;
236 
237 	return pd->get_bklight_max(pd);
238 }
239 
240 static unsigned long mipid_get_caps(struct lcd_panel *panel)
241 {
242 	return OMAPFB_CAPS_SET_BACKLIGHT;
243 }
244 
245 static u16 read_first_pixel(struct mipid_device *md)
246 {
247 	u16 pixel;
248 	u8 red, green, blue;
249 
250 	mutex_lock(&md->mutex);
251 	mipid_read(md, MIPID_CMD_READ_RED, &red, 1);
252 	mipid_read(md, MIPID_CMD_READ_GREEN, &green, 1);
253 	mipid_read(md, MIPID_CMD_READ_BLUE, &blue, 1);
254 	mutex_unlock(&md->mutex);
255 
256 	switch (md->panel.data_lines) {
257 	case 16:
258 		pixel = ((red >> 1) << 11) | (green << 5) | (blue >> 1);
259 		break;
260 	case 24:
261 		/* 24 bit -> 16 bit */
262 		pixel = ((red >> 3) << 11) | ((green >> 2) << 5) |
263 			(blue >> 3);
264 		break;
265 	default:
266 		pixel = 0;
267 		BUG();
268 	}
269 
270 	return pixel;
271 }
272 
273 static int mipid_run_test(struct lcd_panel *panel, int test_num)
274 {
275 	struct mipid_device *md = to_mipid_device(panel);
276 	static const u16 test_values[4] = {
277 		0x0000, 0xffff, 0xaaaa, 0x5555,
278 	};
279 	int i;
280 
281 	if (test_num != MIPID_TEST_RGB_LINES)
282 		return MIPID_TEST_INVALID;
283 
284 	for (i = 0; i < ARRAY_SIZE(test_values); i++) {
285 		int delay;
286 		unsigned long tmo;
287 
288 		omapfb_write_first_pixel(md->fbdev, test_values[i]);
289 		tmo = jiffies + msecs_to_jiffies(100);
290 		delay = 25;
291 		while (1) {
292 			u16 pixel;
293 
294 			msleep(delay);
295 			pixel = read_first_pixel(md);
296 			if (pixel == test_values[i])
297 				break;
298 			if (time_after(jiffies, tmo)) {
299 				dev_err(&md->spi->dev,
300 					"MIPI LCD RGB I/F test failed: "
301 					"expecting %04x, got %04x\n",
302 					test_values[i], pixel);
303 				return MIPID_TEST_FAILED;
304 			}
305 			delay = 10;
306 		}
307 	}
308 
309 	return 0;
310 }
311 
312 static void ls041y3_esd_recover(struct mipid_device *md)
313 {
314 	dev_err(&md->spi->dev, "performing LCD ESD recovery\n");
315 	set_sleep_mode(md, 1);
316 	set_sleep_mode(md, 0);
317 }
318 
319 static void ls041y3_esd_check_mode1(struct mipid_device *md)
320 {
321 	u8 state1, state2;
322 
323 	mipid_read(md, MIPID_CMD_RDDSDR, &state1, 1);
324 	set_sleep_mode(md, 0);
325 	mipid_read(md, MIPID_CMD_RDDSDR, &state2, 1);
326 	dev_dbg(&md->spi->dev, "ESD mode 1 state1 %02x state2 %02x\n",
327 		state1, state2);
328 	/* Each sleep out command will trigger a self diagnostic and flip
329 	* Bit6 if the test passes.
330 	*/
331 	if (!((state1 ^ state2) & (1 << 6)))
332 		ls041y3_esd_recover(md);
333 }
334 
335 static void ls041y3_esd_check_mode2(struct mipid_device *md)
336 {
337 	int i;
338 	u8 rbuf[2];
339 	static const struct {
340 		int	cmd;
341 		int	wlen;
342 		u16	wbuf[3];
343 	} *rd, rd_ctrl[7] = {
344 		{ 0xb0, 4, { 0x0101, 0x01fe, } },
345 		{ 0xb1, 4, { 0x01de, 0x0121, } },
346 		{ 0xc2, 4, { 0x0100, 0x0100, } },
347 		{ 0xbd, 2, { 0x0100, } },
348 		{ 0xc2, 4, { 0x01fc, 0x0103, } },
349 		{ 0xb4, 0, },
350 		{ 0x00, 0, },
351 	};
352 
353 	rd = rd_ctrl;
354 	for (i = 0; i < 3; i++, rd++)
355 		mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen);
356 
357 	udelay(10);
358 	mipid_read(md, rd->cmd, rbuf, 2);
359 	rd++;
360 
361 	for (i = 0; i < 3; i++, rd++) {
362 		udelay(10);
363 		mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen);
364 	}
365 
366 	dev_dbg(&md->spi->dev, "ESD mode 2 state %02x\n", rbuf[1]);
367 	if (rbuf[1] == 0x00)
368 		ls041y3_esd_recover(md);
369 }
370 
371 static void ls041y3_esd_check(struct mipid_device *md)
372 {
373 	ls041y3_esd_check_mode1(md);
374 	if (md->revision >= 0x88)
375 		ls041y3_esd_check_mode2(md);
376 }
377 
378 static void mipid_esd_start_check(struct mipid_device *md)
379 {
380 	if (md->esd_check != NULL)
381 		schedule_delayed_work(&md->esd_work,
382 				   MIPID_ESD_CHECK_PERIOD);
383 }
384 
385 static void mipid_esd_stop_check(struct mipid_device *md)
386 {
387 	if (md->esd_check != NULL)
388 		cancel_delayed_work_sync(&md->esd_work);
389 }
390 
391 static void mipid_esd_work(struct work_struct *work)
392 {
393 	struct mipid_device *md = container_of(work, struct mipid_device,
394 					       esd_work.work);
395 
396 	mutex_lock(&md->mutex);
397 	md->esd_check(md);
398 	mutex_unlock(&md->mutex);
399 	mipid_esd_start_check(md);
400 }
401 
402 static int mipid_enable(struct lcd_panel *panel)
403 {
404 	struct mipid_device *md = to_mipid_device(panel);
405 
406 	mutex_lock(&md->mutex);
407 
408 	if (md->enabled) {
409 		mutex_unlock(&md->mutex);
410 		return 0;
411 	}
412 	set_sleep_mode(md, 0);
413 	md->enabled = 1;
414 	send_init_string(md);
415 	set_display_state(md, 1);
416 	mipid_set_bklight_level(panel, md->saved_bklight_level);
417 	mipid_esd_start_check(md);
418 
419 	mutex_unlock(&md->mutex);
420 	return 0;
421 }
422 
423 static void mipid_disable(struct lcd_panel *panel)
424 {
425 	struct mipid_device *md = to_mipid_device(panel);
426 
427 	/*
428 	 * A final ESD work might be called before returning,
429 	 * so do this without holding the lock.
430 	 */
431 	mipid_esd_stop_check(md);
432 	mutex_lock(&md->mutex);
433 
434 	if (!md->enabled) {
435 		mutex_unlock(&md->mutex);
436 		return;
437 	}
438 	md->saved_bklight_level = mipid_get_bklight_level(panel);
439 	mipid_set_bklight_level(panel, 0);
440 	set_display_state(md, 0);
441 	set_sleep_mode(md, 1);
442 	md->enabled = 0;
443 
444 	mutex_unlock(&md->mutex);
445 }
446 
447 static int panel_enabled(struct mipid_device *md)
448 {
449 	u32 disp_status;
450 	int enabled;
451 
452 	mipid_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
453 	disp_status = __be32_to_cpu(disp_status);
454 	enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
455 	dev_dbg(&md->spi->dev,
456 		"LCD panel %senabled by bootloader (status 0x%04x)\n",
457 		enabled ? "" : "not ", disp_status);
458 	return enabled;
459 }
460 
461 static int mipid_init(struct lcd_panel *panel,
462 			    struct omapfb_device *fbdev)
463 {
464 	struct mipid_device *md = to_mipid_device(panel);
465 
466 	md->fbdev = fbdev;
467 	INIT_DELAYED_WORK(&md->esd_work, mipid_esd_work);
468 	mutex_init(&md->mutex);
469 
470 	md->enabled = panel_enabled(md);
471 
472 	if (md->enabled)
473 		mipid_esd_start_check(md);
474 	else
475 		md->saved_bklight_level = mipid_get_bklight_level(panel);
476 
477 	return 0;
478 }
479 
480 static void mipid_cleanup(struct lcd_panel *panel)
481 {
482 	struct mipid_device *md = to_mipid_device(panel);
483 
484 	if (md->enabled)
485 		mipid_esd_stop_check(md);
486 }
487 
488 static const struct lcd_panel mipid_panel = {
489 	.config		= OMAP_LCDC_PANEL_TFT,
490 
491 	.bpp		= 16,
492 	.x_res		= 800,
493 	.y_res		= 480,
494 	.pixel_clock	= 21940,
495 	.hsw		= 50,
496 	.hfp		= 20,
497 	.hbp		= 15,
498 	.vsw		= 2,
499 	.vfp		= 1,
500 	.vbp		= 3,
501 
502 	.init			= mipid_init,
503 	.cleanup		= mipid_cleanup,
504 	.enable			= mipid_enable,
505 	.disable		= mipid_disable,
506 	.get_caps		= mipid_get_caps,
507 	.set_bklight_level	= mipid_set_bklight_level,
508 	.get_bklight_level	= mipid_get_bklight_level,
509 	.get_bklight_max	= mipid_get_bklight_max,
510 	.run_test		= mipid_run_test,
511 };
512 
513 static int mipid_detect(struct mipid_device *md)
514 {
515 	struct mipid_platform_data *pdata;
516 	u8 display_id[3];
517 
518 	pdata = md->spi->dev.platform_data;
519 	if (pdata == NULL) {
520 		dev_err(&md->spi->dev, "missing platform data\n");
521 		return -ENOENT;
522 	}
523 
524 	mipid_read(md, MIPID_CMD_READ_DISP_ID, display_id, 3);
525 	dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
526 		display_id[0], display_id[1], display_id[2]);
527 
528 	switch (display_id[0]) {
529 	case 0x45:
530 		md->panel.name = "lph8923";
531 		break;
532 	case 0x83:
533 		md->panel.name = "ls041y3";
534 		md->esd_check = ls041y3_esd_check;
535 		break;
536 	default:
537 		md->panel.name = "unknown";
538 		dev_err(&md->spi->dev, "invalid display ID\n");
539 		return -ENODEV;
540 	}
541 
542 	md->revision = display_id[1];
543 	md->panel.data_lines = pdata->data_lines;
544 	pr_info("omapfb: %s rev %02x LCD detected, %d data lines\n",
545 			md->panel.name, md->revision, md->panel.data_lines);
546 
547 	return 0;
548 }
549 
550 static int mipid_spi_probe(struct spi_device *spi)
551 {
552 	struct mipid_device *md;
553 	int r;
554 
555 	md = kzalloc(sizeof(*md), GFP_KERNEL);
556 	if (md == NULL) {
557 		dev_err(&spi->dev, "out of memory\n");
558 		return -ENOMEM;
559 	}
560 
561 	/* This will de-assert RESET if active */
562 	md->reset = gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
563 	if (IS_ERR(md->reset))
564 		return dev_err_probe(&spi->dev, PTR_ERR(md->reset),
565 				     "no reset GPIO line\n");
566 
567 	spi->mode = SPI_MODE_0;
568 	md->spi = spi;
569 	dev_set_drvdata(&spi->dev, md);
570 	md->panel = mipid_panel;
571 
572 	r = mipid_detect(md);
573 	if (r < 0)
574 		goto free_md;
575 
576 	omapfb_register_panel(&md->panel);
577 
578 	return 0;
579 
580 free_md:
581 	kfree(md);
582 	return r;
583 }
584 
585 static void mipid_spi_remove(struct spi_device *spi)
586 {
587 	struct mipid_device *md = dev_get_drvdata(&spi->dev);
588 
589 	/* Asserts RESET */
590 	gpiod_set_value(md->reset, 1);
591 	mipid_disable(&md->panel);
592 	kfree(md);
593 }
594 
595 static struct spi_driver mipid_spi_driver = {
596 	.driver = {
597 		.name	= MIPID_MODULE_NAME,
598 	},
599 	.probe	= mipid_spi_probe,
600 	.remove	= mipid_spi_remove,
601 };
602 
603 module_spi_driver(mipid_spi_driver);
604 
605 MODULE_DESCRIPTION("MIPI display driver");
606 MODULE_LICENSE("GPL");
607