1 /* 2 * linux/drivers/video/metronomefb.c -- FB driver for Metronome controller 3 * 4 * Copyright (C) 2008, Jaya Kumar 5 * 6 * This file is subject to the terms and conditions of the GNU General Public 7 * License. See the file COPYING in the main directory of this archive for 8 * more details. 9 * 10 * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. 11 * 12 * This work was made possible by help and equipment support from E-Ink 13 * Corporation. https://www.eink.com/ 14 * 15 * This driver is written to be used with the Metronome display controller. 16 * It is intended to be architecture independent. A board specific driver 17 * must be used to perform all the physical IO interactions. An example 18 * is provided as am200epd.c 19 * 20 */ 21 #include <linux/module.h> 22 #include <linux/kernel.h> 23 #include <linux/errno.h> 24 #include <linux/string.h> 25 #include <linux/mm.h> 26 #include <linux/vmalloc.h> 27 #include <linux/delay.h> 28 #include <linux/interrupt.h> 29 #include <linux/fb.h> 30 #include <linux/init.h> 31 #include <linux/platform_device.h> 32 #include <linux/list.h> 33 #include <linux/firmware.h> 34 #include <linux/dma-mapping.h> 35 #include <linux/uaccess.h> 36 #include <linux/irq.h> 37 38 #include <video/metronomefb.h> 39 40 #include <asm/unaligned.h> 41 42 /* Display specific information */ 43 #define DPY_W 832 44 #define DPY_H 622 45 46 static int user_wfm_size; 47 48 /* frame differs from image. frame includes non-visible pixels */ 49 struct epd_frame { 50 int fw; /* frame width */ 51 int fh; /* frame height */ 52 u16 config[4]; 53 int wfm_size; 54 }; 55 56 static struct epd_frame epd_frame_table[] = { 57 { 58 .fw = 832, 59 .fh = 622, 60 .config = { 61 15 /* sdlew */ 62 | 2 << 8 /* sdosz */ 63 | 0 << 11 /* sdor */ 64 | 0 << 12 /* sdces */ 65 | 0 << 15, /* sdcer */ 66 42 /* gdspl */ 67 | 1 << 8 /* gdr1 */ 68 | 1 << 9 /* sdshr */ 69 | 0 << 15, /* gdspp */ 70 18 /* gdspw */ 71 | 0 << 15, /* dispc */ 72 599 /* vdlc */ 73 | 0 << 11 /* dsi */ 74 | 0 << 12, /* dsic */ 75 }, 76 .wfm_size = 47001, 77 }, 78 { 79 .fw = 1088, 80 .fh = 791, 81 .config = { 82 0x0104, 83 0x031f, 84 0x0088, 85 0x02ff, 86 }, 87 .wfm_size = 46770, 88 }, 89 { 90 .fw = 1200, 91 .fh = 842, 92 .config = { 93 0x0101, 94 0x030e, 95 0x0012, 96 0x0280, 97 }, 98 .wfm_size = 46770, 99 }, 100 }; 101 102 static struct fb_fix_screeninfo metronomefb_fix = { 103 .id = "metronomefb", 104 .type = FB_TYPE_PACKED_PIXELS, 105 .visual = FB_VISUAL_STATIC_PSEUDOCOLOR, 106 .xpanstep = 0, 107 .ypanstep = 0, 108 .ywrapstep = 0, 109 .line_length = DPY_W, 110 .accel = FB_ACCEL_NONE, 111 }; 112 113 static struct fb_var_screeninfo metronomefb_var = { 114 .xres = DPY_W, 115 .yres = DPY_H, 116 .xres_virtual = DPY_W, 117 .yres_virtual = DPY_H, 118 .bits_per_pixel = 8, 119 .grayscale = 1, 120 .nonstd = 1, 121 .red = { 4, 3, 0 }, 122 .green = { 0, 0, 0 }, 123 .blue = { 0, 0, 0 }, 124 .transp = { 0, 0, 0 }, 125 }; 126 127 /* the waveform structure that is coming from userspace firmware */ 128 struct waveform_hdr { 129 u8 stuff[32]; 130 131 u8 wmta[3]; 132 u8 fvsn; 133 134 u8 luts; 135 u8 mc; 136 u8 trc; 137 u8 stuff3; 138 139 u8 endb; 140 u8 swtb; 141 u8 stuff2a[2]; 142 143 u8 stuff2b[3]; 144 u8 wfm_cs; 145 } __attribute__ ((packed)); 146 147 /* main metronomefb functions */ 148 static u8 calc_cksum(int start, int end, u8 *mem) 149 { 150 u8 tmp = 0; 151 int i; 152 153 for (i = start; i < end; i++) 154 tmp += mem[i]; 155 156 return tmp; 157 } 158 159 static u16 calc_img_cksum(u16 *start, int length) 160 { 161 u16 tmp = 0; 162 163 while (length--) 164 tmp += *start++; 165 166 return tmp; 167 } 168 169 /* here we decode the incoming waveform file and populate metromem */ 170 static int load_waveform(u8 *mem, size_t size, int m, int t, 171 struct metronomefb_par *par) 172 { 173 int tta; 174 int wmta; 175 int trn = 0; 176 int i; 177 unsigned char v; 178 u8 cksum; 179 int cksum_idx; 180 int wfm_idx, owfm_idx; 181 int mem_idx = 0; 182 struct waveform_hdr *wfm_hdr; 183 u8 *metromem = par->metromem_wfm; 184 struct device *dev = par->info->dev; 185 186 if (user_wfm_size) 187 epd_frame_table[par->dt].wfm_size = user_wfm_size; 188 189 if (size != epd_frame_table[par->dt].wfm_size) { 190 dev_err(dev, "Error: unexpected size %zd != %d\n", size, 191 epd_frame_table[par->dt].wfm_size); 192 return -EINVAL; 193 } 194 195 wfm_hdr = (struct waveform_hdr *) mem; 196 197 if (wfm_hdr->fvsn != 1) { 198 dev_err(dev, "Error: bad fvsn %x\n", wfm_hdr->fvsn); 199 return -EINVAL; 200 } 201 if (wfm_hdr->luts != 0) { 202 dev_err(dev, "Error: bad luts %x\n", wfm_hdr->luts); 203 return -EINVAL; 204 } 205 cksum = calc_cksum(32, 47, mem); 206 if (cksum != wfm_hdr->wfm_cs) { 207 dev_err(dev, "Error: bad cksum %x != %x\n", cksum, 208 wfm_hdr->wfm_cs); 209 return -EINVAL; 210 } 211 wfm_hdr->mc += 1; 212 wfm_hdr->trc += 1; 213 for (i = 0; i < 5; i++) { 214 if (*(wfm_hdr->stuff2a + i) != 0) { 215 dev_err(dev, "Error: unexpected value in padding\n"); 216 return -EINVAL; 217 } 218 } 219 220 /* calculating trn. trn is something used to index into 221 the waveform. presumably selecting the right one for the 222 desired temperature. it works out the offset of the first 223 v that exceeds the specified temperature */ 224 if ((sizeof(*wfm_hdr) + wfm_hdr->trc) > size) 225 return -EINVAL; 226 227 for (i = sizeof(*wfm_hdr); i <= sizeof(*wfm_hdr) + wfm_hdr->trc; i++) { 228 if (mem[i] > t) { 229 trn = i - sizeof(*wfm_hdr) - 1; 230 break; 231 } 232 } 233 234 /* check temperature range table checksum */ 235 cksum_idx = sizeof(*wfm_hdr) + wfm_hdr->trc + 1; 236 if (cksum_idx >= size) 237 return -EINVAL; 238 cksum = calc_cksum(sizeof(*wfm_hdr), cksum_idx, mem); 239 if (cksum != mem[cksum_idx]) { 240 dev_err(dev, "Error: bad temperature range table cksum" 241 " %x != %x\n", cksum, mem[cksum_idx]); 242 return -EINVAL; 243 } 244 245 /* check waveform mode table address checksum */ 246 wmta = get_unaligned_le32(wfm_hdr->wmta) & 0x00FFFFFF; 247 cksum_idx = wmta + m*4 + 3; 248 if (cksum_idx >= size) 249 return -EINVAL; 250 cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem); 251 if (cksum != mem[cksum_idx]) { 252 dev_err(dev, "Error: bad mode table address cksum" 253 " %x != %x\n", cksum, mem[cksum_idx]); 254 return -EINVAL; 255 } 256 257 /* check waveform temperature table address checksum */ 258 tta = get_unaligned_le32(mem + wmta + m * 4) & 0x00FFFFFF; 259 cksum_idx = tta + trn*4 + 3; 260 if (cksum_idx >= size) 261 return -EINVAL; 262 cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem); 263 if (cksum != mem[cksum_idx]) { 264 dev_err(dev, "Error: bad temperature table address cksum" 265 " %x != %x\n", cksum, mem[cksum_idx]); 266 return -EINVAL; 267 } 268 269 /* here we do the real work of putting the waveform into the 270 metromem buffer. this does runlength decoding of the waveform */ 271 wfm_idx = get_unaligned_le32(mem + tta + trn * 4) & 0x00FFFFFF; 272 owfm_idx = wfm_idx; 273 if (wfm_idx >= size) 274 return -EINVAL; 275 while (wfm_idx < size) { 276 unsigned char rl; 277 v = mem[wfm_idx++]; 278 if (v == wfm_hdr->swtb) { 279 while (((v = mem[wfm_idx++]) != wfm_hdr->swtb) && 280 wfm_idx < size) 281 metromem[mem_idx++] = v; 282 283 continue; 284 } 285 286 if (v == wfm_hdr->endb) 287 break; 288 289 rl = mem[wfm_idx++]; 290 for (i = 0; i <= rl; i++) 291 metromem[mem_idx++] = v; 292 } 293 294 cksum_idx = wfm_idx; 295 if (cksum_idx >= size) 296 return -EINVAL; 297 cksum = calc_cksum(owfm_idx, cksum_idx, mem); 298 if (cksum != mem[cksum_idx]) { 299 dev_err(dev, "Error: bad waveform data cksum" 300 " %x != %x\n", cksum, mem[cksum_idx]); 301 return -EINVAL; 302 } 303 par->frame_count = (mem_idx/64); 304 305 return 0; 306 } 307 308 static int metronome_display_cmd(struct metronomefb_par *par) 309 { 310 int i; 311 u16 cs; 312 u16 opcode; 313 static u8 borderval; 314 315 /* setup display command 316 we can't immediately set the opcode since the controller 317 will try parse the command before we've set it all up 318 so we just set cs here and set the opcode at the end */ 319 320 if (par->metromem_cmd->opcode == 0xCC40) 321 opcode = cs = 0xCC41; 322 else 323 opcode = cs = 0xCC40; 324 325 /* set the args ( 2 bytes ) for display */ 326 i = 0; 327 par->metromem_cmd->args[i] = 1 << 3 /* border update */ 328 | ((borderval++ % 4) & 0x0F) << 4 329 | (par->frame_count - 1) << 8; 330 cs += par->metromem_cmd->args[i++]; 331 332 /* the rest are 0 */ 333 memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2); 334 335 par->metromem_cmd->csum = cs; 336 par->metromem_cmd->opcode = opcode; /* display cmd */ 337 338 return par->board->met_wait_event_intr(par); 339 } 340 341 static int metronome_powerup_cmd(struct metronomefb_par *par) 342 { 343 int i; 344 u16 cs; 345 346 /* setup power up command */ 347 par->metromem_cmd->opcode = 0x1234; /* pwr up pseudo cmd */ 348 cs = par->metromem_cmd->opcode; 349 350 /* set pwr1,2,3 to 1024 */ 351 for (i = 0; i < 3; i++) { 352 par->metromem_cmd->args[i] = 1024; 353 cs += par->metromem_cmd->args[i]; 354 } 355 356 /* the rest are 0 */ 357 memset(&par->metromem_cmd->args[i], 0, 358 (ARRAY_SIZE(par->metromem_cmd->args) - i) * 2); 359 360 par->metromem_cmd->csum = cs; 361 362 msleep(1); 363 par->board->set_rst(par, 1); 364 365 msleep(1); 366 par->board->set_stdby(par, 1); 367 368 return par->board->met_wait_event(par); 369 } 370 371 static int metronome_config_cmd(struct metronomefb_par *par) 372 { 373 /* setup config command 374 we can't immediately set the opcode since the controller 375 will try parse the command before we've set it all up */ 376 377 memcpy(par->metromem_cmd->args, epd_frame_table[par->dt].config, 378 sizeof(epd_frame_table[par->dt].config)); 379 /* the rest are 0 */ 380 memset(&par->metromem_cmd->args[4], 0, 381 (ARRAY_SIZE(par->metromem_cmd->args) - 4) * 2); 382 383 par->metromem_cmd->csum = 0xCC10; 384 par->metromem_cmd->csum += calc_img_cksum(par->metromem_cmd->args, 4); 385 par->metromem_cmd->opcode = 0xCC10; /* config cmd */ 386 387 return par->board->met_wait_event(par); 388 } 389 390 static int metronome_init_cmd(struct metronomefb_par *par) 391 { 392 int i; 393 u16 cs; 394 395 /* setup init command 396 we can't immediately set the opcode since the controller 397 will try parse the command before we've set it all up 398 so we just set cs here and set the opcode at the end */ 399 400 cs = 0xCC20; 401 402 /* set the args ( 2 bytes ) for init */ 403 i = 0; 404 par->metromem_cmd->args[i] = 0; 405 cs += par->metromem_cmd->args[i++]; 406 407 /* the rest are 0 */ 408 memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2); 409 410 par->metromem_cmd->csum = cs; 411 par->metromem_cmd->opcode = 0xCC20; /* init cmd */ 412 413 return par->board->met_wait_event(par); 414 } 415 416 static int metronome_init_regs(struct metronomefb_par *par) 417 { 418 int res; 419 420 res = par->board->setup_io(par); 421 if (res) 422 return res; 423 424 res = metronome_powerup_cmd(par); 425 if (res) 426 return res; 427 428 res = metronome_config_cmd(par); 429 if (res) 430 return res; 431 432 res = metronome_init_cmd(par); 433 434 return res; 435 } 436 437 static void metronomefb_dpy_update(struct metronomefb_par *par) 438 { 439 int fbsize; 440 u16 cksum; 441 unsigned char *buf = (unsigned char __force *)par->info->screen_base; 442 443 fbsize = par->info->fix.smem_len; 444 /* copy from vm to metromem */ 445 memcpy(par->metromem_img, buf, fbsize); 446 447 cksum = calc_img_cksum((u16 *) par->metromem_img, fbsize/2); 448 *((u16 *)(par->metromem_img) + fbsize/2) = cksum; 449 metronome_display_cmd(par); 450 } 451 452 static u16 metronomefb_dpy_update_page(struct metronomefb_par *par, int index) 453 { 454 int i; 455 u16 csum = 0; 456 u16 *buf = (u16 __force *)(par->info->screen_base + index); 457 u16 *img = (u16 *)(par->metromem_img + index); 458 459 /* swizzle from vm to metromem and recalc cksum at the same time*/ 460 for (i = 0; i < PAGE_SIZE/2; i++) { 461 *(img + i) = (buf[i] << 5) & 0xE0E0; 462 csum += *(img + i); 463 } 464 return csum; 465 } 466 467 /* this is called back from the deferred io workqueue */ 468 static void metronomefb_dpy_deferred_io(struct fb_info *info, struct list_head *pagereflist) 469 { 470 u16 cksum; 471 struct fb_deferred_io_pageref *pageref; 472 struct metronomefb_par *par = info->par; 473 474 /* walk the written page list and swizzle the data */ 475 list_for_each_entry(pageref, pagereflist, list) { 476 unsigned long pgoffset = pageref->offset >> PAGE_SHIFT; 477 cksum = metronomefb_dpy_update_page(par, pageref->offset); 478 par->metromem_img_csum -= par->csum_table[pgoffset]; 479 par->csum_table[pgoffset] = cksum; 480 par->metromem_img_csum += cksum; 481 } 482 483 metronome_display_cmd(par); 484 } 485 486 static void metronomefb_fillrect(struct fb_info *info, 487 const struct fb_fillrect *rect) 488 { 489 struct metronomefb_par *par = info->par; 490 491 sys_fillrect(info, rect); 492 metronomefb_dpy_update(par); 493 } 494 495 static void metronomefb_copyarea(struct fb_info *info, 496 const struct fb_copyarea *area) 497 { 498 struct metronomefb_par *par = info->par; 499 500 sys_copyarea(info, area); 501 metronomefb_dpy_update(par); 502 } 503 504 static void metronomefb_imageblit(struct fb_info *info, 505 const struct fb_image *image) 506 { 507 struct metronomefb_par *par = info->par; 508 509 sys_imageblit(info, image); 510 metronomefb_dpy_update(par); 511 } 512 513 /* 514 * this is the slow path from userspace. they can seek and write to 515 * the fb. it is based on fb_sys_write 516 */ 517 static ssize_t metronomefb_write(struct fb_info *info, const char __user *buf, 518 size_t count, loff_t *ppos) 519 { 520 struct metronomefb_par *par = info->par; 521 unsigned long p = *ppos; 522 void *dst; 523 int err = 0; 524 unsigned long total_size; 525 526 if (info->state != FBINFO_STATE_RUNNING) 527 return -EPERM; 528 529 total_size = info->fix.smem_len; 530 531 if (p > total_size) 532 return -EFBIG; 533 534 if (count > total_size) { 535 err = -EFBIG; 536 count = total_size; 537 } 538 539 if (count + p > total_size) { 540 if (!err) 541 err = -ENOSPC; 542 543 count = total_size - p; 544 } 545 546 dst = (void __force *)(info->screen_base + p); 547 548 if (copy_from_user(dst, buf, count)) 549 err = -EFAULT; 550 551 if (!err) 552 *ppos += count; 553 554 metronomefb_dpy_update(par); 555 556 return (err) ? err : count; 557 } 558 559 static const struct fb_ops metronomefb_ops = { 560 .owner = THIS_MODULE, 561 .fb_write = metronomefb_write, 562 .fb_fillrect = metronomefb_fillrect, 563 .fb_copyarea = metronomefb_copyarea, 564 .fb_imageblit = metronomefb_imageblit, 565 .fb_mmap = fb_deferred_io_mmap, 566 }; 567 568 static struct fb_deferred_io metronomefb_defio = { 569 .delay = HZ, 570 .sort_pagereflist = true, 571 .deferred_io = metronomefb_dpy_deferred_io, 572 }; 573 574 static int metronomefb_probe(struct platform_device *dev) 575 { 576 struct fb_info *info; 577 struct metronome_board *board; 578 int retval = -ENOMEM; 579 int videomemorysize; 580 unsigned char *videomemory; 581 struct metronomefb_par *par; 582 const struct firmware *fw_entry; 583 int i; 584 int panel_type; 585 int fw, fh; 586 int epd_dt_index; 587 588 /* pick up board specific routines */ 589 board = dev->dev.platform_data; 590 if (!board) 591 return -EINVAL; 592 593 /* try to count device specific driver, if can't, platform recalls */ 594 if (!try_module_get(board->owner)) 595 return -ENODEV; 596 597 info = framebuffer_alloc(sizeof(struct metronomefb_par), &dev->dev); 598 if (!info) 599 goto err; 600 601 /* we have two blocks of memory. 602 info->screen_base which is vm, and is the fb used by apps. 603 par->metromem which is physically contiguous memory and 604 contains the display controller commands, waveform, 605 processed image data and padding. this is the data pulled 606 by the device's LCD controller and pushed to Metronome. 607 the metromem memory is allocated by the board driver and 608 is provided to us */ 609 610 panel_type = board->get_panel_type(); 611 switch (panel_type) { 612 case 6: 613 epd_dt_index = 0; 614 break; 615 case 8: 616 epd_dt_index = 1; 617 break; 618 case 97: 619 epd_dt_index = 2; 620 break; 621 default: 622 dev_err(&dev->dev, "Unexpected panel type. Defaulting to 6\n"); 623 epd_dt_index = 0; 624 break; 625 } 626 627 fw = epd_frame_table[epd_dt_index].fw; 628 fh = epd_frame_table[epd_dt_index].fh; 629 630 /* we need to add a spare page because our csum caching scheme walks 631 * to the end of the page */ 632 videomemorysize = PAGE_SIZE + (fw * fh); 633 videomemory = vzalloc(videomemorysize); 634 if (!videomemory) 635 goto err_fb_rel; 636 637 info->screen_base = (char __force __iomem *)videomemory; 638 info->fbops = &metronomefb_ops; 639 640 metronomefb_fix.line_length = fw; 641 metronomefb_var.xres = fw; 642 metronomefb_var.yres = fh; 643 metronomefb_var.xres_virtual = fw; 644 metronomefb_var.yres_virtual = fh; 645 info->var = metronomefb_var; 646 info->fix = metronomefb_fix; 647 info->fix.smem_len = videomemorysize; 648 par = info->par; 649 par->info = info; 650 par->board = board; 651 par->dt = epd_dt_index; 652 init_waitqueue_head(&par->waitq); 653 654 /* this table caches per page csum values. */ 655 par->csum_table = vmalloc(videomemorysize/PAGE_SIZE); 656 if (!par->csum_table) 657 goto err_vfree; 658 659 /* the physical framebuffer that we use is setup by 660 * the platform device driver. It will provide us 661 * with cmd, wfm and image memory in a contiguous area. */ 662 retval = board->setup_fb(par); 663 if (retval) { 664 dev_err(&dev->dev, "Failed to setup fb\n"); 665 goto err_csum_table; 666 } 667 668 /* after this point we should have a framebuffer */ 669 if ((!par->metromem_wfm) || (!par->metromem_img) || 670 (!par->metromem_dma)) { 671 dev_err(&dev->dev, "fb access failure\n"); 672 retval = -EINVAL; 673 goto err_csum_table; 674 } 675 676 info->fix.smem_start = par->metromem_dma; 677 678 /* load the waveform in. assume mode 3, temp 31 for now 679 a) request the waveform file from userspace 680 b) process waveform and decode into metromem */ 681 retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev); 682 if (retval < 0) { 683 dev_err(&dev->dev, "Failed to get waveform\n"); 684 goto err_csum_table; 685 } 686 687 retval = load_waveform((u8 *) fw_entry->data, fw_entry->size, 3, 31, 688 par); 689 release_firmware(fw_entry); 690 if (retval < 0) { 691 dev_err(&dev->dev, "Failed processing waveform\n"); 692 goto err_csum_table; 693 } 694 695 retval = board->setup_irq(info); 696 if (retval) 697 goto err_csum_table; 698 699 retval = metronome_init_regs(par); 700 if (retval < 0) 701 goto err_free_irq; 702 703 info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; 704 705 info->fbdefio = &metronomefb_defio; 706 fb_deferred_io_init(info); 707 708 retval = fb_alloc_cmap(&info->cmap, 8, 0); 709 if (retval < 0) { 710 dev_err(&dev->dev, "Failed to allocate colormap\n"); 711 goto err_free_irq; 712 } 713 714 /* set cmap */ 715 for (i = 0; i < 8; i++) 716 info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/16; 717 memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*8); 718 memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*8); 719 720 retval = register_framebuffer(info); 721 if (retval < 0) 722 goto err_cmap; 723 724 platform_set_drvdata(dev, info); 725 726 dev_dbg(&dev->dev, 727 "fb%d: Metronome frame buffer device, using %dK of video" 728 " memory\n", info->node, videomemorysize >> 10); 729 730 return 0; 731 732 err_cmap: 733 fb_dealloc_cmap(&info->cmap); 734 err_free_irq: 735 board->cleanup(par); 736 err_csum_table: 737 vfree(par->csum_table); 738 err_vfree: 739 vfree(videomemory); 740 err_fb_rel: 741 framebuffer_release(info); 742 err: 743 module_put(board->owner); 744 return retval; 745 } 746 747 static int metronomefb_remove(struct platform_device *dev) 748 { 749 struct fb_info *info = platform_get_drvdata(dev); 750 751 if (info) { 752 struct metronomefb_par *par = info->par; 753 754 unregister_framebuffer(info); 755 fb_deferred_io_cleanup(info); 756 fb_dealloc_cmap(&info->cmap); 757 par->board->cleanup(par); 758 vfree(par->csum_table); 759 vfree((void __force *)info->screen_base); 760 module_put(par->board->owner); 761 dev_dbg(&dev->dev, "calling release\n"); 762 framebuffer_release(info); 763 } 764 return 0; 765 } 766 767 static struct platform_driver metronomefb_driver = { 768 .probe = metronomefb_probe, 769 .remove = metronomefb_remove, 770 .driver = { 771 .name = "metronomefb", 772 }, 773 }; 774 module_platform_driver(metronomefb_driver); 775 776 module_param(user_wfm_size, uint, 0); 777 MODULE_PARM_DESC(user_wfm_size, "Set custom waveform size"); 778 779 MODULE_DESCRIPTION("fbdev driver for Metronome controller"); 780 MODULE_AUTHOR("Jaya Kumar"); 781 MODULE_LICENSE("GPL"); 782