1 /* 2 * linux/drivers/video/kyro/STG4000InitDevice.c 3 * 4 * Copyright (C) 2000 Imagination Technologies Ltd 5 * Copyright (C) 2002 STMicroelectronics 6 * 7 * This file is subject to the terms and conditions of the GNU General Public 8 * License. See the file COPYING in the main directory of this archive 9 * for more details. 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/errno.h> 14 #include <linux/types.h> 15 #include <linux/pci.h> 16 17 #include "STG4000Reg.h" 18 #include "STG4000Interface.h" 19 20 /* SDRAM fixed settings */ 21 #define SDRAM_CFG_0 0x49A1 22 #define SDRAM_CFG_1 0xA732 23 #define SDRAM_CFG_2 0x31 24 #define SDRAM_ARB_CFG 0xA0 25 #define SDRAM_REFRESH 0x20 26 27 /* Reset values */ 28 #define PMX2_SOFTRESET_DAC_RST 0x0001 29 #define PMX2_SOFTRESET_C1_RST 0x0004 30 #define PMX2_SOFTRESET_C2_RST 0x0008 31 #define PMX2_SOFTRESET_3D_RST 0x0010 32 #define PMX2_SOFTRESET_VIDIN_RST 0x0020 33 #define PMX2_SOFTRESET_TLB_RST 0x0040 34 #define PMX2_SOFTRESET_SD_RST 0x0080 35 #define PMX2_SOFTRESET_VGA_RST 0x0100 36 #define PMX2_SOFTRESET_ROM_RST 0x0200 /* reserved bit, do not reset */ 37 #define PMX2_SOFTRESET_TA_RST 0x0400 38 #define PMX2_SOFTRESET_REG_RST 0x4000 39 #define PMX2_SOFTRESET_ALL 0x7fff 40 41 /* Core clock freq */ 42 #define CORE_PLL_FREQ 1000000 43 44 /* Reference Clock freq */ 45 #define REF_FREQ 14318 46 47 /* PCI Registers */ 48 static u16 CorePllControl = 0x70; 49 50 #define PCI_CONFIG_SUBSYS_ID 0x2e 51 52 /* Misc */ 53 #define CORE_PLL_MODE_REG_0_7 3 54 #define CORE_PLL_MODE_REG_8_15 2 55 #define CORE_PLL_MODE_CONFIG_REG 1 56 #define DAC_PLL_CONFIG_REG 0 57 58 #define STG_MAX_VCO 500000 59 #define STG_MIN_VCO 100000 60 61 /* PLL Clock */ 62 #define STG4K3_PLL_SCALER 8 /* scale numbers by 2^8 for fixed point calc */ 63 #define STG4K3_PLL_MIN_R 2 /* Minimum multiplier */ 64 #define STG4K3_PLL_MAX_R 33 /* Max */ 65 #define STG4K3_PLL_MIN_F 2 /* Minimum divisor */ 66 #define STG4K3_PLL_MAX_F 513 /* Max */ 67 #define STG4K3_PLL_MIN_OD 0 /* Min output divider (shift) */ 68 #define STG4K3_PLL_MAX_OD 2 /* Max */ 69 #define STG4K3_PLL_MIN_VCO_SC (100000000 >> STG4K3_PLL_SCALER) /* Min VCO rate */ 70 #define STG4K3_PLL_MAX_VCO_SC (500000000 >> STG4K3_PLL_SCALER) /* Max VCO rate */ 71 #define STG4K3_PLL_MINR_VCO_SC (100000000 >> STG4K3_PLL_SCALER) /* Min VCO rate (restricted) */ 72 #define STG4K3_PLL_MAXR_VCO_SC (500000000 >> STG4K3_PLL_SCALER) /* Max VCO rate (restricted) */ 73 #define STG4K3_PLL_MINR_VCO 100000000 /* Min VCO rate (restricted) */ 74 #define STG4K3_PLL_MAX_VCO 500000000 /* Max VCO rate */ 75 #define STG4K3_PLL_MAXR_VCO 500000000 /* Max VCO rate (restricted) */ 76 77 #define OS_DELAY(X) \ 78 { \ 79 volatile u32 i,count=0; \ 80 for(i=0;i<X;i++) count++; \ 81 } 82 83 static u32 InitSDRAMRegisters(volatile STG4000REG __iomem *pSTGReg, 84 u32 dwSubSysID, u32 dwRevID) 85 { 86 u32 adwSDRAMArgCfg0[] = { 0xa0, 0x80, 0xa0, 0xa0, 0xa0 }; 87 u32 adwSDRAMCfg1[] = { 0x8732, 0x8732, 0xa732, 0xa732, 0x8732 }; 88 u32 adwSDRAMCfg2[] = { 0x87d2, 0x87d2, 0xa7d2, 0x87d2, 0xa7d2 }; 89 u32 adwSDRAMRsh[] = { 36, 39, 40 }; 90 u32 adwChipSpeed[] = { 110, 120, 125 }; 91 u32 dwMemTypeIdx; 92 u32 dwChipSpeedIdx; 93 94 /* Get memory tpye and chip speed indexs from the SubSysDevID */ 95 dwMemTypeIdx = (dwSubSysID & 0x70) >> 4; 96 dwChipSpeedIdx = (dwSubSysID & 0x180) >> 7; 97 98 if (dwMemTypeIdx > 4 || dwChipSpeedIdx > 2) 99 return 0; 100 101 /* Program SD-RAM interface */ 102 STG_WRITE_REG(SDRAMArbiterConf, adwSDRAMArgCfg0[dwMemTypeIdx]); 103 if (dwRevID < 5) { 104 STG_WRITE_REG(SDRAMConf0, 0x49A1); 105 STG_WRITE_REG(SDRAMConf1, adwSDRAMCfg1[dwMemTypeIdx]); 106 } else { 107 STG_WRITE_REG(SDRAMConf0, 0x4DF1); 108 STG_WRITE_REG(SDRAMConf1, adwSDRAMCfg2[dwMemTypeIdx]); 109 } 110 111 STG_WRITE_REG(SDRAMConf2, 0x31); 112 STG_WRITE_REG(SDRAMRefresh, adwSDRAMRsh[dwChipSpeedIdx]); 113 114 return adwChipSpeed[dwChipSpeedIdx] * 10000; 115 } 116 117 u32 ProgramClock(u32 refClock, 118 u32 coreClock, 119 u32 * FOut, u32 * ROut, u32 * POut) 120 { 121 u32 R = 0, F = 0, OD = 0, ODIndex = 0; 122 u32 ulBestR = 0, ulBestF = 0, ulBestOD = 0; 123 u32 ulBestClk = 0, ulBestScore = 0; 124 u32 ulScore, ulPhaseScore, ulVcoScore; 125 u32 ulTmp = 0, ulVCO; 126 u32 ulScaleClockReq, ulMinClock, ulMaxClock; 127 static const unsigned char ODValues[] = { 1, 2, 0 }; 128 129 /* Translate clock in Hz */ 130 coreClock *= 100; /* in Hz */ 131 refClock *= 1000; /* in Hz */ 132 133 /* Work out acceptable clock 134 * The method calculates ~ +- 0.4% (1/256) 135 */ 136 ulMinClock = coreClock - (coreClock >> 8); 137 ulMaxClock = coreClock + (coreClock >> 8); 138 139 /* Scale clock required for use in calculations */ 140 ulScaleClockReq = coreClock >> STG4K3_PLL_SCALER; 141 142 /* Iterate through post divider values */ 143 for (ODIndex = 0; ODIndex < 3; ODIndex++) { 144 OD = ODValues[ODIndex]; 145 R = STG4K3_PLL_MIN_R; 146 147 /* loop for pre-divider from min to max */ 148 while (R <= STG4K3_PLL_MAX_R) { 149 /* estimate required feedback multiplier */ 150 ulTmp = R * (ulScaleClockReq << OD); 151 152 /* F = ClkRequired * R * (2^OD) / Fref */ 153 F = (u32)(ulTmp / (refClock >> STG4K3_PLL_SCALER)); 154 155 /* compensate for accuracy */ 156 if (F > STG4K3_PLL_MIN_F) 157 F--; 158 159 160 /* 161 * We should be close to our target frequency (if it's 162 * achievable with current OD & R) let's iterate 163 * through F for best fit 164 */ 165 while ((F >= STG4K3_PLL_MIN_F) && 166 (F <= STG4K3_PLL_MAX_F)) { 167 /* Calc VCO at full accuracy */ 168 ulVCO = refClock / R; 169 ulVCO = F * ulVCO; 170 171 /* 172 * Check it's within restricted VCO range 173 * unless of course the desired frequency is 174 * above the restricted range, then test 175 * against VCO limit 176 */ 177 if ((ulVCO >= STG4K3_PLL_MINR_VCO) && 178 ((ulVCO <= STG4K3_PLL_MAXR_VCO) || 179 ((coreClock > STG4K3_PLL_MAXR_VCO) 180 && (ulVCO <= STG4K3_PLL_MAX_VCO)))) { 181 ulTmp = (ulVCO >> OD); /* Clock = VCO / (2^OD) */ 182 183 /* Is this clock good enough? */ 184 if ((ulTmp >= ulMinClock) 185 && (ulTmp <= ulMaxClock)) { 186 ulPhaseScore = (((refClock / R) - (refClock / STG4K3_PLL_MAX_R))) / ((refClock - (refClock / STG4K3_PLL_MAX_R)) >> 10); 187 188 ulVcoScore = ((ulVCO - STG4K3_PLL_MINR_VCO)) / ((STG4K3_PLL_MAXR_VCO - STG4K3_PLL_MINR_VCO) >> 10); 189 ulScore = ulPhaseScore + ulVcoScore; 190 191 if (!ulBestScore) { 192 ulBestOD = OD; 193 ulBestF = F; 194 ulBestR = R; 195 ulBestClk = ulTmp; 196 ulBestScore = 197 ulScore; 198 } 199 /* is this better, ( aim for highest Score) */ 200 /*-------------------------------------------------------------------------- 201 Here we want to use a scoring system which will take account of both the 202 value at the phase comparater and the VCO output 203 to do this we will use a cumulative score between the two 204 The way this ends up is that we choose the first value in the loop anyway 205 but we shall keep this code in case new restrictions come into play 206 --------------------------------------------------------------------------*/ 207 if ((ulScore >= ulBestScore) && (OD > 0)) { 208 ulBestOD = OD; 209 ulBestF = F; 210 ulBestR = R; 211 ulBestClk = ulTmp; 212 ulBestScore = 213 ulScore; 214 } 215 } 216 } 217 F++; 218 } 219 R++; 220 } 221 } 222 223 /* 224 did we find anything? 225 Then return RFOD 226 */ 227 if (ulBestScore) { 228 *ROut = ulBestR; 229 *FOut = ulBestF; 230 231 if ((ulBestOD == 2) || (ulBestOD == 3)) { 232 *POut = 3; 233 } else 234 *POut = ulBestOD; 235 236 } 237 238 return (ulBestClk); 239 } 240 241 int SetCoreClockPLL(volatile STG4000REG __iomem *pSTGReg, struct pci_dev *pDev) 242 { 243 u32 F, R, P; 244 u16 core_pll = 0, sub; 245 u32 tmp; 246 u32 ulChipSpeed; 247 248 STG_WRITE_REG(IntMask, 0xFFFF); 249 250 /* Disable Primary Core Thread0 */ 251 tmp = STG_READ_REG(Thread0Enable); 252 CLEAR_BIT(0); 253 STG_WRITE_REG(Thread0Enable, tmp); 254 255 /* Disable Primary Core Thread1 */ 256 tmp = STG_READ_REG(Thread1Enable); 257 CLEAR_BIT(0); 258 STG_WRITE_REG(Thread1Enable, tmp); 259 260 STG_WRITE_REG(SoftwareReset, 261 PMX2_SOFTRESET_REG_RST | PMX2_SOFTRESET_ROM_RST); 262 STG_WRITE_REG(SoftwareReset, 263 PMX2_SOFTRESET_REG_RST | PMX2_SOFTRESET_TA_RST | 264 PMX2_SOFTRESET_ROM_RST); 265 266 /* Need to play around to reset TA */ 267 STG_WRITE_REG(TAConfiguration, 0); 268 STG_WRITE_REG(SoftwareReset, 269 PMX2_SOFTRESET_REG_RST | PMX2_SOFTRESET_ROM_RST); 270 STG_WRITE_REG(SoftwareReset, 271 PMX2_SOFTRESET_REG_RST | PMX2_SOFTRESET_TA_RST | 272 PMX2_SOFTRESET_ROM_RST); 273 274 pci_read_config_word(pDev, PCI_CONFIG_SUBSYS_ID, &sub); 275 276 ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub, 277 (u32)pDev->revision); 278 279 if (ulChipSpeed == 0) 280 return -EINVAL; 281 282 ProgramClock(REF_FREQ, CORE_PLL_FREQ, &F, &R, &P); 283 284 core_pll |= ((P) | ((F - 2) << 2) | ((R - 2) << 11)); 285 286 /* Set Core PLL Control to Core PLL Mode */ 287 288 /* Send bits 0:7 of the Core PLL Mode register */ 289 tmp = ((CORE_PLL_MODE_REG_0_7 << 8) | (core_pll & 0x00FF)); 290 pci_write_config_word(pDev, CorePllControl, tmp); 291 /* Without some delay between the PCI config writes the clock does 292 not reliably set when the code is compiled -O3 293 */ 294 OS_DELAY(1000000); 295 296 tmp |= SET_BIT(14); 297 pci_write_config_word(pDev, CorePllControl, tmp); 298 OS_DELAY(1000000); 299 300 /* Send bits 8:15 of the Core PLL Mode register */ 301 tmp = 302 ((CORE_PLL_MODE_REG_8_15 << 8) | ((core_pll & 0xFF00) >> 8)); 303 pci_write_config_word(pDev, CorePllControl, tmp); 304 OS_DELAY(1000000); 305 306 tmp |= SET_BIT(14); 307 pci_write_config_word(pDev, CorePllControl, tmp); 308 OS_DELAY(1000000); 309 310 STG_WRITE_REG(SoftwareReset, PMX2_SOFTRESET_ALL); 311 312 #if 0 313 /* Enable Primary Core Thread0 */ 314 tmp = ((STG_READ_REG(Thread0Enable)) | SET_BIT(0)); 315 STG_WRITE_REG(Thread0Enable, tmp); 316 317 /* Enable Primary Core Thread1 */ 318 tmp = ((STG_READ_REG(Thread1Enable)) | SET_BIT(0)); 319 STG_WRITE_REG(Thread1Enable, tmp); 320 #endif 321 322 return 0; 323 } 324