1 /* 2 * drivers/video/geode/video_cs5530.c 3 * -- CS5530 video device 4 * 5 * Copyright (C) 2005 Arcom Control Systems Ltd. 6 * 7 * Based on AMD's original 2.4 driver: 8 * Copyright (C) 2004 Advanced Micro Devices, Inc. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 */ 15 #include <linux/fb.h> 16 #include <linux/delay.h> 17 #include <asm/io.h> 18 #include <asm/delay.h> 19 20 #include "geodefb.h" 21 #include "video_cs5530.h" 22 23 /* 24 * CS5530 PLL table. This maps pixclocks to the appropriate PLL register 25 * value. 26 */ 27 struct cs5530_pll_entry { 28 long pixclock; /* ps */ 29 u32 pll_value; 30 }; 31 32 static const struct cs5530_pll_entry cs5530_pll_table[] = { 33 { 39721, 0x31C45801, }, /* 25.1750 MHz */ 34 { 35308, 0x20E36802, }, /* 28.3220 */ 35 { 31746, 0x33915801, }, /* 31.5000 */ 36 { 27777, 0x31EC4801, }, /* 36.0000 */ 37 { 26666, 0x21E22801, }, /* 37.5000 */ 38 { 25000, 0x33088801, }, /* 40.0000 */ 39 { 22271, 0x33E22801, }, /* 44.9000 */ 40 { 20202, 0x336C4801, }, /* 49.5000 */ 41 { 20000, 0x23088801, }, /* 50.0000 */ 42 { 19860, 0x23088801, }, /* 50.3500 */ 43 { 18518, 0x3708A801, }, /* 54.0000 */ 44 { 17777, 0x23E36802, }, /* 56.2500 */ 45 { 17733, 0x23E36802, }, /* 56.3916 */ 46 { 17653, 0x23E36802, }, /* 56.6444 */ 47 { 16949, 0x37C45801, }, /* 59.0000 */ 48 { 15873, 0x23EC4801, }, /* 63.0000 */ 49 { 15384, 0x37911801, }, /* 65.0000 */ 50 { 14814, 0x37963803, }, /* 67.5000 */ 51 { 14124, 0x37058803, }, /* 70.8000 */ 52 { 13888, 0x3710C805, }, /* 72.0000 */ 53 { 13333, 0x37E22801, }, /* 75.0000 */ 54 { 12698, 0x27915801, }, /* 78.7500 */ 55 { 12500, 0x37D8D802, }, /* 80.0000 */ 56 { 11135, 0x27588802, }, /* 89.8000 */ 57 { 10582, 0x27EC4802, }, /* 94.5000 */ 58 { 10101, 0x27AC6803, }, /* 99.0000 */ 59 { 10000, 0x27088801, }, /* 100.0000 */ 60 { 9259, 0x2710C805, }, /* 108.0000 */ 61 { 8888, 0x27E36802, }, /* 112.5000 */ 62 { 7692, 0x27C58803, }, /* 130.0000 */ 63 { 7407, 0x27316803, }, /* 135.0000 */ 64 { 6349, 0x2F915801, }, /* 157.5000 */ 65 { 6172, 0x2F08A801, }, /* 162.0000 */ 66 { 5714, 0x2FB11802, }, /* 175.0000 */ 67 { 5291, 0x2FEC4802, }, /* 189.0000 */ 68 { 4950, 0x2F963803, }, /* 202.0000 */ 69 { 4310, 0x2FB1B802, }, /* 232.0000 */ 70 }; 71 72 static void cs5530_set_dclk_frequency(struct fb_info *info) 73 { 74 struct geodefb_par *par = info->par; 75 int i; 76 u32 value; 77 long min, diff; 78 79 /* Search the table for the closest pixclock. */ 80 value = cs5530_pll_table[0].pll_value; 81 min = cs5530_pll_table[0].pixclock - info->var.pixclock; 82 if (min < 0) min = -min; 83 for (i = 1; i < ARRAY_SIZE(cs5530_pll_table); i++) { 84 diff = cs5530_pll_table[i].pixclock - info->var.pixclock; 85 if (diff < 0L) diff = -diff; 86 if (diff < min) { 87 min = diff; 88 value = cs5530_pll_table[i].pll_value; 89 } 90 } 91 92 writel(value, par->vid_regs + CS5530_DOT_CLK_CONFIG); 93 writel(value | 0x80000100, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* set reset and bypass */ 94 udelay(500); /* wait for PLL to settle */ 95 writel(value & 0x7FFFFFFF, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* clear reset */ 96 writel(value & 0x7FFFFEFF, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* clear bypass */ 97 } 98 99 static void cs5530_configure_display(struct fb_info *info) 100 { 101 struct geodefb_par *par = info->par; 102 u32 dcfg; 103 104 dcfg = readl(par->vid_regs + CS5530_DISPLAY_CONFIG); 105 106 /* Clear bits from existing mode. */ 107 dcfg &= ~(CS5530_DCFG_CRT_SYNC_SKW_MASK | CS5530_DCFG_PWR_SEQ_DLY_MASK 108 | CS5530_DCFG_CRT_HSYNC_POL | CS5530_DCFG_CRT_VSYNC_POL 109 | CS5530_DCFG_FP_PWR_EN | CS5530_DCFG_FP_DATA_EN 110 | CS5530_DCFG_DAC_PWR_EN | CS5530_DCFG_VSYNC_EN 111 | CS5530_DCFG_HSYNC_EN); 112 113 /* Set default sync skew and power sequence delays. */ 114 dcfg |= (CS5530_DCFG_CRT_SYNC_SKW_INIT | CS5530_DCFG_PWR_SEQ_DLY_INIT 115 | CS5530_DCFG_GV_PAL_BYP); 116 117 /* Enable DACs, hsync and vsync for CRTs */ 118 if (par->enable_crt) { 119 dcfg |= CS5530_DCFG_DAC_PWR_EN; 120 dcfg |= CS5530_DCFG_HSYNC_EN | CS5530_DCFG_VSYNC_EN; 121 } 122 /* Enable panel power and data if using a flat panel. */ 123 if (par->panel_x > 0) { 124 dcfg |= CS5530_DCFG_FP_PWR_EN; 125 dcfg |= CS5530_DCFG_FP_DATA_EN; 126 } 127 128 /* Sync polarities. */ 129 if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) 130 dcfg |= CS5530_DCFG_CRT_HSYNC_POL; 131 if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) 132 dcfg |= CS5530_DCFG_CRT_VSYNC_POL; 133 134 writel(dcfg, par->vid_regs + CS5530_DISPLAY_CONFIG); 135 } 136 137 static int cs5530_blank_display(struct fb_info *info, int blank_mode) 138 { 139 struct geodefb_par *par = info->par; 140 u32 dcfg; 141 int blank, hsync, vsync; 142 143 switch (blank_mode) { 144 case FB_BLANK_UNBLANK: 145 blank = 0; hsync = 1; vsync = 1; 146 break; 147 case FB_BLANK_NORMAL: 148 blank = 1; hsync = 1; vsync = 1; 149 break; 150 case FB_BLANK_VSYNC_SUSPEND: 151 blank = 1; hsync = 1; vsync = 0; 152 break; 153 case FB_BLANK_HSYNC_SUSPEND: 154 blank = 1; hsync = 0; vsync = 1; 155 break; 156 case FB_BLANK_POWERDOWN: 157 blank = 1; hsync = 0; vsync = 0; 158 break; 159 default: 160 return -EINVAL; 161 } 162 163 dcfg = readl(par->vid_regs + CS5530_DISPLAY_CONFIG); 164 165 dcfg &= ~(CS5530_DCFG_DAC_BL_EN | CS5530_DCFG_DAC_PWR_EN 166 | CS5530_DCFG_HSYNC_EN | CS5530_DCFG_VSYNC_EN 167 | CS5530_DCFG_FP_DATA_EN | CS5530_DCFG_FP_PWR_EN); 168 169 if (par->enable_crt) { 170 if (!blank) 171 dcfg |= CS5530_DCFG_DAC_BL_EN | CS5530_DCFG_DAC_PWR_EN; 172 if (hsync) 173 dcfg |= CS5530_DCFG_HSYNC_EN; 174 if (vsync) 175 dcfg |= CS5530_DCFG_VSYNC_EN; 176 } 177 if (par->panel_x > 0) { 178 if (!blank) 179 dcfg |= CS5530_DCFG_FP_DATA_EN; 180 if (hsync && vsync) 181 dcfg |= CS5530_DCFG_FP_PWR_EN; 182 } 183 184 writel(dcfg, par->vid_regs + CS5530_DISPLAY_CONFIG); 185 186 return 0; 187 } 188 189 struct geode_vid_ops cs5530_vid_ops = { 190 .set_dclk = cs5530_set_dclk_frequency, 191 .configure_display = cs5530_configure_display, 192 .blank_display = cs5530_blank_display, 193 }; 194