1 /* 2 * drivers/video/geode/display_gx1.c 3 * -- Geode GX1 display controller 4 * 5 * Copyright (C) 2005 Arcom Control Systems Ltd. 6 * 7 * Based on AMD's original 2.4 driver: 8 * Copyright (C) 2004 Advanced Micro Devices, Inc. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 */ 15 #include <linux/spinlock.h> 16 #include <linux/fb.h> 17 #include <linux/delay.h> 18 #include <asm/io.h> 19 #include <asm/div64.h> 20 #include <asm/delay.h> 21 22 #include "geodefb.h" 23 #include "display_gx1.h" 24 25 static DEFINE_SPINLOCK(gx1_conf_reg_lock); 26 27 static u8 gx1_read_conf_reg(u8 reg) 28 { 29 u8 val, ccr3; 30 unsigned long flags; 31 32 spin_lock_irqsave(&gx1_conf_reg_lock, flags); 33 34 outb(CONFIG_CCR3, 0x22); 35 ccr3 = inb(0x23); 36 outb(CONFIG_CCR3, 0x22); 37 outb(ccr3 | CONFIG_CCR3_MAPEN, 0x23); 38 outb(reg, 0x22); 39 val = inb(0x23); 40 outb(CONFIG_CCR3, 0x22); 41 outb(ccr3, 0x23); 42 43 spin_unlock_irqrestore(&gx1_conf_reg_lock, flags); 44 45 return val; 46 } 47 48 unsigned gx1_gx_base(void) 49 { 50 return (gx1_read_conf_reg(CONFIG_GCR) & 0x03) << 30; 51 } 52 53 int gx1_frame_buffer_size(void) 54 { 55 void __iomem *mc_regs; 56 u32 bank_cfg; 57 int d; 58 unsigned dram_size = 0, fb_base; 59 60 mc_regs = ioremap(gx1_gx_base() + 0x8400, 0x100); 61 if (!mc_regs) 62 return -ENOMEM; 63 64 65 /* Calculate the total size of both DIMM0 and DIMM1. */ 66 bank_cfg = readl(mc_regs + MC_BANK_CFG); 67 68 for (d = 0; d < 2; d++) { 69 if ((bank_cfg & MC_BCFG_DIMM0_PG_SZ_MASK) != MC_BCFG_DIMM0_PG_SZ_NO_DIMM) 70 dram_size += 0x400000 << ((bank_cfg & MC_BCFG_DIMM0_SZ_MASK) >> 8); 71 bank_cfg >>= 16; /* look at DIMM1 next */ 72 } 73 74 fb_base = (readl(mc_regs + MC_GBASE_ADD) & MC_GADD_GBADD_MASK) << 19; 75 76 iounmap(mc_regs); 77 78 return dram_size - fb_base; 79 } 80 81 static void gx1_set_mode(struct fb_info *info) 82 { 83 struct geodefb_par *par = info->par; 84 u32 gcfg, tcfg, ocfg, dclk_div, val; 85 int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal; 86 int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; 87 88 /* Unlock the display controller registers. */ 89 readl(par->dc_regs + DC_UNLOCK); 90 writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); 91 92 gcfg = readl(par->dc_regs + DC_GENERAL_CFG); 93 tcfg = readl(par->dc_regs + DC_TIMING_CFG); 94 95 /* Blank the display and disable the timing generator. */ 96 tcfg &= ~(DC_TCFG_BLKE | DC_TCFG_TGEN); 97 writel(tcfg, par->dc_regs + DC_TIMING_CFG); 98 99 /* Wait for pending memory requests before disabling the FIFO load. */ 100 udelay(100); 101 102 /* Disable FIFO load and compression. */ 103 gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); 104 writel(gcfg, par->dc_regs + DC_GENERAL_CFG); 105 106 /* Setup DCLK and its divisor. */ 107 gcfg &= ~DC_GCFG_DCLK_MASK; 108 writel(gcfg, par->dc_regs + DC_GENERAL_CFG); 109 110 par->vid_ops->set_dclk(info); 111 112 dclk_div = DC_GCFG_DCLK_DIV_1; /* FIXME: may need to divide DCLK by 2 sometimes? */ 113 gcfg |= dclk_div; 114 writel(gcfg, par->dc_regs + DC_GENERAL_CFG); 115 116 /* Wait for the clock generatation to settle. This is needed since 117 * some of the register writes that follow require that clock to be 118 * present. */ 119 udelay(1000); /* FIXME: seems a little long */ 120 121 /* 122 * Setup new mode. 123 */ 124 125 /* Clear all unused feature bits. */ 126 gcfg = DC_GCFG_VRDY | dclk_div; 127 128 /* Set FIFO priority (default 6/5) and enable. */ 129 /* FIXME: increase fifo priority for 1280x1024 modes? */ 130 gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE; 131 132 /* FIXME: Set pixel and line double bits if necessary. */ 133 134 /* Framebuffer start offset. */ 135 writel(0, par->dc_regs + DC_FB_ST_OFFSET); 136 137 /* Line delta and line buffer length. */ 138 writel(info->fix.line_length >> 2, par->dc_regs + DC_LINE_DELTA); 139 writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, 140 par->dc_regs + DC_BUF_SIZE); 141 142 /* Output configuration. Enable panel data, set pixel format. */ 143 ocfg = DC_OCFG_PCKE | DC_OCFG_PDEL | DC_OCFG_PDEH; 144 if (info->var.bits_per_pixel == 8) ocfg |= DC_OCFG_8BPP; 145 146 /* Enable timing generator, sync and FP data. */ 147 tcfg = DC_TCFG_FPPE | DC_TCFG_HSYE | DC_TCFG_VSYE | DC_TCFG_BLKE 148 | DC_TCFG_TGEN; 149 150 /* Horizontal and vertical timings. */ 151 hactive = info->var.xres; 152 hblankstart = hactive; 153 hsyncstart = hblankstart + info->var.right_margin; 154 hsyncend = hsyncstart + info->var.hsync_len; 155 hblankend = hsyncend + info->var.left_margin; 156 htotal = hblankend; 157 158 vactive = info->var.yres; 159 vblankstart = vactive; 160 vsyncstart = vblankstart + info->var.lower_margin; 161 vsyncend = vsyncstart + info->var.vsync_len; 162 vblankend = vsyncend + info->var.upper_margin; 163 vtotal = vblankend; 164 165 val = (hactive - 1) | ((htotal - 1) << 16); 166 writel(val, par->dc_regs + DC_H_TIMING_1); 167 val = (hblankstart - 1) | ((hblankend - 1) << 16); 168 writel(val, par->dc_regs + DC_H_TIMING_2); 169 val = (hsyncstart - 1) | ((hsyncend - 1) << 16); 170 writel(val, par->dc_regs + DC_H_TIMING_3); 171 writel(val, par->dc_regs + DC_FP_H_TIMING); 172 val = (vactive - 1) | ((vtotal - 1) << 16); 173 writel(val, par->dc_regs + DC_V_TIMING_1); 174 val = (vblankstart - 1) | ((vblankend - 1) << 16); 175 writel(val, par->dc_regs + DC_V_TIMING_2); 176 val = (vsyncstart - 1) | ((vsyncend - 1) << 16); 177 writel(val, par->dc_regs + DC_V_TIMING_3); 178 val = (vsyncstart - 2) | ((vsyncend - 2) << 16); 179 writel(val, par->dc_regs + DC_FP_V_TIMING); 180 181 /* Write final register values. */ 182 writel(ocfg, par->dc_regs + DC_OUTPUT_CFG); 183 writel(tcfg, par->dc_regs + DC_TIMING_CFG); 184 udelay(1000); /* delay after TIMING_CFG. FIXME: perhaps a little long */ 185 writel(gcfg, par->dc_regs + DC_GENERAL_CFG); 186 187 par->vid_ops->configure_display(info); 188 189 /* Relock display controller registers */ 190 writel(0, par->dc_regs + DC_UNLOCK); 191 192 /* FIXME: write line_length and bpp to Graphics Pipeline GP_BLT_STATUS 193 * register. */ 194 } 195 196 static void gx1_set_hw_palette_reg(struct fb_info *info, unsigned regno, 197 unsigned red, unsigned green, unsigned blue) 198 { 199 struct geodefb_par *par = info->par; 200 int val; 201 202 /* Hardware palette is in RGB 6-6-6 format. */ 203 val = (red << 2) & 0x3f000; 204 val |= (green >> 4) & 0x00fc0; 205 val |= (blue >> 10) & 0x0003f; 206 207 writel(regno, par->dc_regs + DC_PAL_ADDRESS); 208 writel(val, par->dc_regs + DC_PAL_DATA); 209 } 210 211 const struct geode_dc_ops gx1_dc_ops = { 212 .set_mode = gx1_set_mode, 213 .set_palette_reg = gx1_set_hw_palette_reg, 214 }; 215