1 /* 2 * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. 3 * 4 * Freescale DIU Frame Buffer device driver 5 * 6 * Authors: Hongjun Chen <hong-jun.chen@freescale.com> 7 * Paul Widmer <paul.widmer@freescale.com> 8 * Srikanth Srinivasan <srikanth.srinivasan@freescale.com> 9 * York Sun <yorksun@freescale.com> 10 * 11 * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix 12 * 13 * This program is free software; you can redistribute it and/or modify it 14 * under the terms of the GNU General Public License as published by the 15 * Free Software Foundation; either version 2 of the License, or (at your 16 * option) any later version. 17 * 18 */ 19 20 #include <linux/module.h> 21 #include <linux/kernel.h> 22 #include <linux/errno.h> 23 #include <linux/string.h> 24 #include <linux/slab.h> 25 #include <linux/fb.h> 26 #include <linux/init.h> 27 #include <linux/dma-mapping.h> 28 #include <linux/platform_device.h> 29 #include <linux/interrupt.h> 30 #include <linux/clk.h> 31 #include <linux/uaccess.h> 32 #include <linux/vmalloc.h> 33 #include <linux/spinlock.h> 34 #include <linux/of_address.h> 35 #include <linux/of_irq.h> 36 37 #include <sysdev/fsl_soc.h> 38 #include <linux/fsl-diu-fb.h> 39 #include "edid.h" 40 41 #define NUM_AOIS 5 /* 1 for plane 0, 2 for planes 1 & 2 each */ 42 43 /* HW cursor parameters */ 44 #define MAX_CURS 32 45 46 /* INT_STATUS/INT_MASK field descriptions */ 47 #define INT_VSYNC 0x01 /* Vsync interrupt */ 48 #define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */ 49 #define INT_UNDRUN 0x04 /* Under run exception interrupt */ 50 #define INT_PARERR 0x08 /* Display parameters error interrupt */ 51 #define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */ 52 53 /* 54 * List of supported video modes 55 * 56 * The first entry is the default video mode. The remain entries are in 57 * order if increasing resolution and frequency. The 320x240-60 mode is 58 * the initial AOI for the second and third planes. 59 */ 60 static struct fb_videomode fsl_diu_mode_db[] = { 61 { 62 .refresh = 60, 63 .xres = 1024, 64 .yres = 768, 65 .pixclock = 15385, 66 .left_margin = 160, 67 .right_margin = 24, 68 .upper_margin = 29, 69 .lower_margin = 3, 70 .hsync_len = 136, 71 .vsync_len = 6, 72 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 73 .vmode = FB_VMODE_NONINTERLACED 74 }, 75 { 76 .refresh = 60, 77 .xres = 320, 78 .yres = 240, 79 .pixclock = 79440, 80 .left_margin = 16, 81 .right_margin = 16, 82 .upper_margin = 16, 83 .lower_margin = 5, 84 .hsync_len = 48, 85 .vsync_len = 1, 86 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 87 .vmode = FB_VMODE_NONINTERLACED 88 }, 89 { 90 .refresh = 60, 91 .xres = 640, 92 .yres = 480, 93 .pixclock = 39722, 94 .left_margin = 48, 95 .right_margin = 16, 96 .upper_margin = 33, 97 .lower_margin = 10, 98 .hsync_len = 96, 99 .vsync_len = 2, 100 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 101 .vmode = FB_VMODE_NONINTERLACED 102 }, 103 { 104 .refresh = 72, 105 .xres = 640, 106 .yres = 480, 107 .pixclock = 32052, 108 .left_margin = 128, 109 .right_margin = 24, 110 .upper_margin = 28, 111 .lower_margin = 9, 112 .hsync_len = 40, 113 .vsync_len = 3, 114 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 115 .vmode = FB_VMODE_NONINTERLACED 116 }, 117 { 118 .refresh = 75, 119 .xres = 640, 120 .yres = 480, 121 .pixclock = 31747, 122 .left_margin = 120, 123 .right_margin = 16, 124 .upper_margin = 16, 125 .lower_margin = 1, 126 .hsync_len = 64, 127 .vsync_len = 3, 128 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 129 .vmode = FB_VMODE_NONINTERLACED 130 }, 131 { 132 .refresh = 90, 133 .xres = 640, 134 .yres = 480, 135 .pixclock = 25057, 136 .left_margin = 120, 137 .right_margin = 32, 138 .upper_margin = 14, 139 .lower_margin = 25, 140 .hsync_len = 40, 141 .vsync_len = 14, 142 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 143 .vmode = FB_VMODE_NONINTERLACED 144 }, 145 { 146 .refresh = 100, 147 .xres = 640, 148 .yres = 480, 149 .pixclock = 22272, 150 .left_margin = 48, 151 .right_margin = 32, 152 .upper_margin = 17, 153 .lower_margin = 22, 154 .hsync_len = 128, 155 .vsync_len = 12, 156 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 157 .vmode = FB_VMODE_NONINTERLACED 158 }, 159 { 160 .refresh = 60, 161 .xres = 800, 162 .yres = 480, 163 .pixclock = 33805, 164 .left_margin = 96, 165 .right_margin = 24, 166 .upper_margin = 10, 167 .lower_margin = 3, 168 .hsync_len = 72, 169 .vsync_len = 7, 170 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 171 .vmode = FB_VMODE_NONINTERLACED 172 }, 173 { 174 .refresh = 60, 175 .xres = 800, 176 .yres = 600, 177 .pixclock = 25000, 178 .left_margin = 88, 179 .right_margin = 40, 180 .upper_margin = 23, 181 .lower_margin = 1, 182 .hsync_len = 128, 183 .vsync_len = 4, 184 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 185 .vmode = FB_VMODE_NONINTERLACED 186 }, 187 { 188 .refresh = 60, 189 .xres = 854, 190 .yres = 480, 191 .pixclock = 31518, 192 .left_margin = 104, 193 .right_margin = 16, 194 .upper_margin = 13, 195 .lower_margin = 1, 196 .hsync_len = 88, 197 .vsync_len = 3, 198 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 199 .vmode = FB_VMODE_NONINTERLACED 200 }, 201 { 202 .refresh = 70, 203 .xres = 1024, 204 .yres = 768, 205 .pixclock = 16886, 206 .left_margin = 3, 207 .right_margin = 3, 208 .upper_margin = 2, 209 .lower_margin = 2, 210 .hsync_len = 40, 211 .vsync_len = 18, 212 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 213 .vmode = FB_VMODE_NONINTERLACED 214 }, 215 { 216 .refresh = 75, 217 .xres = 1024, 218 .yres = 768, 219 .pixclock = 15009, 220 .left_margin = 3, 221 .right_margin = 3, 222 .upper_margin = 2, 223 .lower_margin = 2, 224 .hsync_len = 80, 225 .vsync_len = 32, 226 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 227 .vmode = FB_VMODE_NONINTERLACED 228 }, 229 { 230 .refresh = 60, 231 .xres = 1280, 232 .yres = 480, 233 .pixclock = 18939, 234 .left_margin = 353, 235 .right_margin = 47, 236 .upper_margin = 39, 237 .lower_margin = 4, 238 .hsync_len = 8, 239 .vsync_len = 2, 240 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 241 .vmode = FB_VMODE_NONINTERLACED 242 }, 243 { 244 .refresh = 60, 245 .xres = 1280, 246 .yres = 720, 247 .pixclock = 13426, 248 .left_margin = 192, 249 .right_margin = 64, 250 .upper_margin = 22, 251 .lower_margin = 1, 252 .hsync_len = 136, 253 .vsync_len = 3, 254 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 255 .vmode = FB_VMODE_NONINTERLACED 256 }, 257 { 258 .refresh = 60, 259 .xres = 1280, 260 .yres = 1024, 261 .pixclock = 9375, 262 .left_margin = 38, 263 .right_margin = 128, 264 .upper_margin = 2, 265 .lower_margin = 7, 266 .hsync_len = 216, 267 .vsync_len = 37, 268 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 269 .vmode = FB_VMODE_NONINTERLACED 270 }, 271 { 272 .refresh = 70, 273 .xres = 1280, 274 .yres = 1024, 275 .pixclock = 9380, 276 .left_margin = 6, 277 .right_margin = 6, 278 .upper_margin = 4, 279 .lower_margin = 4, 280 .hsync_len = 60, 281 .vsync_len = 94, 282 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 283 .vmode = FB_VMODE_NONINTERLACED 284 }, 285 { 286 .refresh = 75, 287 .xres = 1280, 288 .yres = 1024, 289 .pixclock = 9380, 290 .left_margin = 6, 291 .right_margin = 6, 292 .upper_margin = 4, 293 .lower_margin = 4, 294 .hsync_len = 60, 295 .vsync_len = 15, 296 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 297 .vmode = FB_VMODE_NONINTERLACED 298 }, 299 { 300 .refresh = 60, 301 .xres = 1920, 302 .yres = 1080, 303 .pixclock = 5787, 304 .left_margin = 328, 305 .right_margin = 120, 306 .upper_margin = 34, 307 .lower_margin = 1, 308 .hsync_len = 208, 309 .vsync_len = 3, 310 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 311 .vmode = FB_VMODE_NONINTERLACED 312 }, 313 }; 314 315 static char *fb_mode; 316 static unsigned long default_bpp = 32; 317 static enum fsl_diu_monitor_port monitor_port; 318 static char *monitor_string; 319 320 #if defined(CONFIG_NOT_COHERENT_CACHE) 321 static u8 *coherence_data; 322 static size_t coherence_data_size; 323 static unsigned int d_cache_line_size; 324 #endif 325 326 static DEFINE_SPINLOCK(diu_lock); 327 328 enum mfb_index { 329 PLANE0 = 0, /* Plane 0, only one AOI that fills the screen */ 330 PLANE1_AOI0, /* Plane 1, first AOI */ 331 PLANE1_AOI1, /* Plane 1, second AOI */ 332 PLANE2_AOI0, /* Plane 2, first AOI */ 333 PLANE2_AOI1, /* Plane 2, second AOI */ 334 }; 335 336 struct mfb_info { 337 enum mfb_index index; 338 char *id; 339 int registered; 340 unsigned long pseudo_palette[16]; 341 struct diu_ad *ad; 342 unsigned char g_alpha; 343 unsigned int count; 344 int x_aoi_d; /* aoi display x offset to physical screen */ 345 int y_aoi_d; /* aoi display y offset to physical screen */ 346 struct fsl_diu_data *parent; 347 }; 348 349 /** 350 * struct fsl_diu_data - per-DIU data structure 351 * @dma_addr: DMA address of this structure 352 * @fsl_diu_info: fb_info objects, one per AOI 353 * @dev_attr: sysfs structure 354 * @irq: IRQ 355 * @monitor_port: the monitor port this DIU is connected to 356 * @diu_reg: pointer to the DIU hardware registers 357 * @reg_lock: spinlock for register access 358 * @dummy_aoi: video buffer for the 4x4 32-bit dummy AOI 359 * dummy_ad: DIU Area Descriptor for the dummy AOI 360 * @ad[]: Area Descriptors for each real AOI 361 * @gamma: gamma color table 362 * @cursor: hardware cursor data 363 * 364 * This data structure must be allocated with 32-byte alignment, so that the 365 * internal fields can be aligned properly. 366 */ 367 struct fsl_diu_data { 368 dma_addr_t dma_addr; 369 struct fb_info fsl_diu_info[NUM_AOIS]; 370 struct mfb_info mfb[NUM_AOIS]; 371 struct device_attribute dev_attr; 372 unsigned int irq; 373 enum fsl_diu_monitor_port monitor_port; 374 struct diu __iomem *diu_reg; 375 spinlock_t reg_lock; 376 u8 dummy_aoi[4 * 4 * 4]; 377 struct diu_ad dummy_ad __aligned(8); 378 struct diu_ad ad[NUM_AOIS] __aligned(8); 379 u8 gamma[256 * 3] __aligned(32); 380 /* It's easier to parse the cursor data as little-endian */ 381 __le16 cursor[MAX_CURS * MAX_CURS] __aligned(32); 382 /* Blank cursor data -- used to hide the cursor */ 383 __le16 blank_cursor[MAX_CURS * MAX_CURS] __aligned(32); 384 uint8_t edid_data[EDID_LENGTH]; 385 bool has_edid; 386 } __aligned(32); 387 388 /* Determine the DMA address of a member of the fsl_diu_data structure */ 389 #define DMA_ADDR(p, f) ((p)->dma_addr + offsetof(struct fsl_diu_data, f)) 390 391 static struct mfb_info mfb_template[] = { 392 { 393 .index = PLANE0, 394 .id = "Panel0", 395 .registered = 0, 396 .count = 0, 397 .x_aoi_d = 0, 398 .y_aoi_d = 0, 399 }, 400 { 401 .index = PLANE1_AOI0, 402 .id = "Panel1 AOI0", 403 .registered = 0, 404 .g_alpha = 0xff, 405 .count = 0, 406 .x_aoi_d = 0, 407 .y_aoi_d = 0, 408 }, 409 { 410 .index = PLANE1_AOI1, 411 .id = "Panel1 AOI1", 412 .registered = 0, 413 .g_alpha = 0xff, 414 .count = 0, 415 .x_aoi_d = 0, 416 .y_aoi_d = 480, 417 }, 418 { 419 .index = PLANE2_AOI0, 420 .id = "Panel2 AOI0", 421 .registered = 0, 422 .g_alpha = 0xff, 423 .count = 0, 424 .x_aoi_d = 640, 425 .y_aoi_d = 0, 426 }, 427 { 428 .index = PLANE2_AOI1, 429 .id = "Panel2 AOI1", 430 .registered = 0, 431 .g_alpha = 0xff, 432 .count = 0, 433 .x_aoi_d = 640, 434 .y_aoi_d = 480, 435 }, 436 }; 437 438 #ifdef DEBUG 439 static void __attribute__ ((unused)) fsl_diu_dump(struct diu __iomem *hw) 440 { 441 mb(); 442 pr_debug("DIU: desc=%08x,%08x,%08x, gamma=%08x pallete=%08x " 443 "cursor=%08x curs_pos=%08x diu_mode=%08x bgnd=%08x " 444 "disp_size=%08x hsyn_para=%08x vsyn_para=%08x syn_pol=%08x " 445 "thresholds=%08x int_mask=%08x plut=%08x\n", 446 hw->desc[0], hw->desc[1], hw->desc[2], hw->gamma, 447 hw->pallete, hw->cursor, hw->curs_pos, hw->diu_mode, 448 hw->bgnd, hw->disp_size, hw->hsyn_para, hw->vsyn_para, 449 hw->syn_pol, hw->thresholds, hw->int_mask, hw->plut); 450 rmb(); 451 } 452 #endif 453 454 /** 455 * fsl_diu_name_to_port - convert a port name to a monitor port enum 456 * 457 * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns 458 * the enum fsl_diu_monitor_port that corresponds to that string. 459 * 460 * For compatibility with older versions, a number ("0", "1", or "2") is also 461 * supported. 462 * 463 * If the string is unknown, DVI is assumed. 464 * 465 * If the particular port is not supported by the platform, another port 466 * (platform-specific) is chosen instead. 467 */ 468 static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s) 469 { 470 enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI; 471 unsigned long val; 472 473 if (s) { 474 if (!kstrtoul(s, 10, &val) && (val <= 2)) 475 port = (enum fsl_diu_monitor_port) val; 476 else if (strncmp(s, "lvds", 4) == 0) 477 port = FSL_DIU_PORT_LVDS; 478 else if (strncmp(s, "dlvds", 5) == 0) 479 port = FSL_DIU_PORT_DLVDS; 480 } 481 482 return diu_ops.valid_monitor_port(port); 483 } 484 485 /* 486 * Workaround for failed writing desc register of planes. 487 * Needed with MPC5121 DIU rev 2.0 silicon. 488 */ 489 void wr_reg_wa(u32 *reg, u32 val) 490 { 491 do { 492 out_be32(reg, val); 493 } while (in_be32(reg) != val); 494 } 495 496 static void fsl_diu_enable_panel(struct fb_info *info) 497 { 498 struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; 499 struct diu_ad *ad = mfbi->ad; 500 struct fsl_diu_data *data = mfbi->parent; 501 struct diu __iomem *hw = data->diu_reg; 502 503 switch (mfbi->index) { 504 case PLANE0: 505 wr_reg_wa(&hw->desc[0], ad->paddr); 506 break; 507 case PLANE1_AOI0: 508 cmfbi = &data->mfb[2]; 509 if (hw->desc[1] != ad->paddr) { /* AOI0 closed */ 510 if (cmfbi->count > 0) /* AOI1 open */ 511 ad->next_ad = 512 cpu_to_le32(cmfbi->ad->paddr); 513 else 514 ad->next_ad = 0; 515 wr_reg_wa(&hw->desc[1], ad->paddr); 516 } 517 break; 518 case PLANE2_AOI0: 519 cmfbi = &data->mfb[4]; 520 if (hw->desc[2] != ad->paddr) { /* AOI0 closed */ 521 if (cmfbi->count > 0) /* AOI1 open */ 522 ad->next_ad = 523 cpu_to_le32(cmfbi->ad->paddr); 524 else 525 ad->next_ad = 0; 526 wr_reg_wa(&hw->desc[2], ad->paddr); 527 } 528 break; 529 case PLANE1_AOI1: 530 pmfbi = &data->mfb[1]; 531 ad->next_ad = 0; 532 if (hw->desc[1] == data->dummy_ad.paddr) 533 wr_reg_wa(&hw->desc[1], ad->paddr); 534 else /* AOI0 open */ 535 pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); 536 break; 537 case PLANE2_AOI1: 538 pmfbi = &data->mfb[3]; 539 ad->next_ad = 0; 540 if (hw->desc[2] == data->dummy_ad.paddr) 541 wr_reg_wa(&hw->desc[2], ad->paddr); 542 else /* AOI0 was open */ 543 pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); 544 break; 545 } 546 } 547 548 static void fsl_diu_disable_panel(struct fb_info *info) 549 { 550 struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; 551 struct diu_ad *ad = mfbi->ad; 552 struct fsl_diu_data *data = mfbi->parent; 553 struct diu __iomem *hw = data->diu_reg; 554 555 switch (mfbi->index) { 556 case PLANE0: 557 wr_reg_wa(&hw->desc[0], 0); 558 break; 559 case PLANE1_AOI0: 560 cmfbi = &data->mfb[2]; 561 if (cmfbi->count > 0) /* AOI1 is open */ 562 wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr); 563 /* move AOI1 to the first */ 564 else /* AOI1 was closed */ 565 wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); 566 /* close AOI 0 */ 567 break; 568 case PLANE2_AOI0: 569 cmfbi = &data->mfb[4]; 570 if (cmfbi->count > 0) /* AOI1 is open */ 571 wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr); 572 /* move AOI1 to the first */ 573 else /* AOI1 was closed */ 574 wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); 575 /* close AOI 0 */ 576 break; 577 case PLANE1_AOI1: 578 pmfbi = &data->mfb[1]; 579 if (hw->desc[1] != ad->paddr) { 580 /* AOI1 is not the first in the chain */ 581 if (pmfbi->count > 0) 582 /* AOI0 is open, must be the first */ 583 pmfbi->ad->next_ad = 0; 584 } else /* AOI1 is the first in the chain */ 585 wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); 586 /* close AOI 1 */ 587 break; 588 case PLANE2_AOI1: 589 pmfbi = &data->mfb[3]; 590 if (hw->desc[2] != ad->paddr) { 591 /* AOI1 is not the first in the chain */ 592 if (pmfbi->count > 0) 593 /* AOI0 is open, must be the first */ 594 pmfbi->ad->next_ad = 0; 595 } else /* AOI1 is the first in the chain */ 596 wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); 597 /* close AOI 1 */ 598 break; 599 } 600 } 601 602 static void enable_lcdc(struct fb_info *info) 603 { 604 struct mfb_info *mfbi = info->par; 605 struct fsl_diu_data *data = mfbi->parent; 606 struct diu __iomem *hw = data->diu_reg; 607 608 out_be32(&hw->diu_mode, MFB_MODE1); 609 } 610 611 static void disable_lcdc(struct fb_info *info) 612 { 613 struct mfb_info *mfbi = info->par; 614 struct fsl_diu_data *data = mfbi->parent; 615 struct diu __iomem *hw = data->diu_reg; 616 617 out_be32(&hw->diu_mode, 0); 618 } 619 620 static void adjust_aoi_size_position(struct fb_var_screeninfo *var, 621 struct fb_info *info) 622 { 623 struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par; 624 struct fsl_diu_data *data = mfbi->parent; 625 int available_height, upper_aoi_bottom; 626 enum mfb_index index = mfbi->index; 627 int lower_aoi_is_open, upper_aoi_is_open; 628 __u32 base_plane_width, base_plane_height, upper_aoi_height; 629 630 base_plane_width = data->fsl_diu_info[0].var.xres; 631 base_plane_height = data->fsl_diu_info[0].var.yres; 632 633 if (mfbi->x_aoi_d < 0) 634 mfbi->x_aoi_d = 0; 635 if (mfbi->y_aoi_d < 0) 636 mfbi->y_aoi_d = 0; 637 switch (index) { 638 case PLANE0: 639 if (mfbi->x_aoi_d != 0) 640 mfbi->x_aoi_d = 0; 641 if (mfbi->y_aoi_d != 0) 642 mfbi->y_aoi_d = 0; 643 break; 644 case PLANE1_AOI0: 645 case PLANE2_AOI0: 646 lower_aoi_mfbi = data->fsl_diu_info[index+1].par; 647 lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0; 648 if (var->xres > base_plane_width) 649 var->xres = base_plane_width; 650 if ((mfbi->x_aoi_d + var->xres) > base_plane_width) 651 mfbi->x_aoi_d = base_plane_width - var->xres; 652 653 if (lower_aoi_is_open) 654 available_height = lower_aoi_mfbi->y_aoi_d; 655 else 656 available_height = base_plane_height; 657 if (var->yres > available_height) 658 var->yres = available_height; 659 if ((mfbi->y_aoi_d + var->yres) > available_height) 660 mfbi->y_aoi_d = available_height - var->yres; 661 break; 662 case PLANE1_AOI1: 663 case PLANE2_AOI1: 664 upper_aoi_mfbi = data->fsl_diu_info[index-1].par; 665 upper_aoi_height = data->fsl_diu_info[index-1].var.yres; 666 upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height; 667 upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0; 668 if (var->xres > base_plane_width) 669 var->xres = base_plane_width; 670 if ((mfbi->x_aoi_d + var->xres) > base_plane_width) 671 mfbi->x_aoi_d = base_plane_width - var->xres; 672 if (mfbi->y_aoi_d < 0) 673 mfbi->y_aoi_d = 0; 674 if (upper_aoi_is_open) { 675 if (mfbi->y_aoi_d < upper_aoi_bottom) 676 mfbi->y_aoi_d = upper_aoi_bottom; 677 available_height = base_plane_height 678 - upper_aoi_bottom; 679 } else 680 available_height = base_plane_height; 681 if (var->yres > available_height) 682 var->yres = available_height; 683 if ((mfbi->y_aoi_d + var->yres) > base_plane_height) 684 mfbi->y_aoi_d = base_plane_height - var->yres; 685 break; 686 } 687 } 688 /* 689 * Checks to see if the hardware supports the state requested by var passed 690 * in. This function does not alter the hardware state! If the var passed in 691 * is slightly off by what the hardware can support then we alter the var 692 * PASSED in to what we can do. If the hardware doesn't support mode change 693 * a -EINVAL will be returned by the upper layers. 694 */ 695 static int fsl_diu_check_var(struct fb_var_screeninfo *var, 696 struct fb_info *info) 697 { 698 if (var->xres_virtual < var->xres) 699 var->xres_virtual = var->xres; 700 if (var->yres_virtual < var->yres) 701 var->yres_virtual = var->yres; 702 703 if (var->xoffset < 0) 704 var->xoffset = 0; 705 706 if (var->yoffset < 0) 707 var->yoffset = 0; 708 709 if (var->xoffset + info->var.xres > info->var.xres_virtual) 710 var->xoffset = info->var.xres_virtual - info->var.xres; 711 712 if (var->yoffset + info->var.yres > info->var.yres_virtual) 713 var->yoffset = info->var.yres_virtual - info->var.yres; 714 715 if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && 716 (var->bits_per_pixel != 16)) 717 var->bits_per_pixel = default_bpp; 718 719 switch (var->bits_per_pixel) { 720 case 16: 721 var->red.length = 5; 722 var->red.offset = 11; 723 var->red.msb_right = 0; 724 725 var->green.length = 6; 726 var->green.offset = 5; 727 var->green.msb_right = 0; 728 729 var->blue.length = 5; 730 var->blue.offset = 0; 731 var->blue.msb_right = 0; 732 733 var->transp.length = 0; 734 var->transp.offset = 0; 735 var->transp.msb_right = 0; 736 break; 737 case 24: 738 var->red.length = 8; 739 var->red.offset = 0; 740 var->red.msb_right = 0; 741 742 var->green.length = 8; 743 var->green.offset = 8; 744 var->green.msb_right = 0; 745 746 var->blue.length = 8; 747 var->blue.offset = 16; 748 var->blue.msb_right = 0; 749 750 var->transp.length = 0; 751 var->transp.offset = 0; 752 var->transp.msb_right = 0; 753 break; 754 case 32: 755 var->red.length = 8; 756 var->red.offset = 16; 757 var->red.msb_right = 0; 758 759 var->green.length = 8; 760 var->green.offset = 8; 761 var->green.msb_right = 0; 762 763 var->blue.length = 8; 764 var->blue.offset = 0; 765 var->blue.msb_right = 0; 766 767 var->transp.length = 8; 768 var->transp.offset = 24; 769 var->transp.msb_right = 0; 770 771 break; 772 } 773 774 var->height = -1; 775 var->width = -1; 776 var->grayscale = 0; 777 778 /* Copy nonstd field to/from sync for fbset usage */ 779 var->sync |= var->nonstd; 780 var->nonstd |= var->sync; 781 782 adjust_aoi_size_position(var, info); 783 return 0; 784 } 785 786 static void set_fix(struct fb_info *info) 787 { 788 struct fb_fix_screeninfo *fix = &info->fix; 789 struct fb_var_screeninfo *var = &info->var; 790 struct mfb_info *mfbi = info->par; 791 792 strncpy(fix->id, mfbi->id, sizeof(fix->id)); 793 fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; 794 fix->type = FB_TYPE_PACKED_PIXELS; 795 fix->accel = FB_ACCEL_NONE; 796 fix->visual = FB_VISUAL_TRUECOLOR; 797 fix->xpanstep = 1; 798 fix->ypanstep = 1; 799 } 800 801 static void update_lcdc(struct fb_info *info) 802 { 803 struct fb_var_screeninfo *var = &info->var; 804 struct mfb_info *mfbi = info->par; 805 struct fsl_diu_data *data = mfbi->parent; 806 struct diu __iomem *hw; 807 int i, j; 808 u8 *gamma_table_base; 809 810 u32 temp; 811 812 hw = data->diu_reg; 813 814 if (diu_ops.set_monitor_port) 815 diu_ops.set_monitor_port(data->monitor_port); 816 gamma_table_base = data->gamma; 817 818 /* Prep for DIU init - gamma table, cursor table */ 819 820 for (i = 0; i <= 2; i++) 821 for (j = 0; j <= 255; j++) 822 *gamma_table_base++ = j; 823 824 if (diu_ops.set_gamma_table) 825 diu_ops.set_gamma_table(data->monitor_port, data->gamma); 826 827 disable_lcdc(info); 828 829 /* Program DIU registers */ 830 831 out_be32(&hw->gamma, DMA_ADDR(data, gamma)); 832 833 out_be32(&hw->bgnd, 0x007F7F7F); /* Set background to grey */ 834 out_be32(&hw->disp_size, (var->yres << 16) | var->xres); 835 836 /* Horizontal and vertical configuration register */ 837 temp = var->left_margin << 22 | /* BP_H */ 838 var->hsync_len << 11 | /* PW_H */ 839 var->right_margin; /* FP_H */ 840 841 out_be32(&hw->hsyn_para, temp); 842 843 temp = var->upper_margin << 22 | /* BP_V */ 844 var->vsync_len << 11 | /* PW_V */ 845 var->lower_margin; /* FP_V */ 846 847 out_be32(&hw->vsyn_para, temp); 848 849 diu_ops.set_pixel_clock(var->pixclock); 850 851 #ifndef CONFIG_PPC_MPC512x 852 /* 853 * The PLUT register is defined differently on the MPC5121 than it 854 * is on other SOCs. Unfortunately, there's no documentation that 855 * explains how it's supposed to be programmed, so for now, we leave 856 * it at the default value on the MPC5121. 857 * 858 * For other SOCs, program it for the highest priority, which will 859 * reduce the chance of underrun. Technically, we should scale the 860 * priority to match the screen resolution, but doing that properly 861 * requires delicate fine-tuning for each use-case. 862 */ 863 out_be32(&hw->plut, 0x01F5F666); 864 #endif 865 866 /* Enable the DIU */ 867 enable_lcdc(info); 868 } 869 870 static int map_video_memory(struct fb_info *info) 871 { 872 u32 smem_len = info->fix.line_length * info->var.yres_virtual; 873 void *p; 874 875 p = alloc_pages_exact(smem_len, GFP_DMA | __GFP_ZERO); 876 if (!p) { 877 dev_err(info->dev, "unable to allocate fb memory\n"); 878 return -ENOMEM; 879 } 880 mutex_lock(&info->mm_lock); 881 info->screen_base = p; 882 info->fix.smem_start = virt_to_phys(info->screen_base); 883 info->fix.smem_len = smem_len; 884 mutex_unlock(&info->mm_lock); 885 info->screen_size = info->fix.smem_len; 886 887 return 0; 888 } 889 890 static void unmap_video_memory(struct fb_info *info) 891 { 892 void *p = info->screen_base; 893 size_t l = info->fix.smem_len; 894 895 mutex_lock(&info->mm_lock); 896 info->screen_base = NULL; 897 info->fix.smem_start = 0; 898 info->fix.smem_len = 0; 899 mutex_unlock(&info->mm_lock); 900 901 if (p) 902 free_pages_exact(p, l); 903 } 904 905 /* 906 * Using the fb_var_screeninfo in fb_info we set the aoi of this 907 * particular framebuffer. It is a light version of fsl_diu_set_par. 908 */ 909 static int fsl_diu_set_aoi(struct fb_info *info) 910 { 911 struct fb_var_screeninfo *var = &info->var; 912 struct mfb_info *mfbi = info->par; 913 struct diu_ad *ad = mfbi->ad; 914 915 /* AOI should not be greater than display size */ 916 ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); 917 ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); 918 return 0; 919 } 920 921 /** 922 * fsl_diu_get_pixel_format: return the pixel format for a given color depth 923 * 924 * The pixel format is a 32-bit value that determine which bits in each 925 * pixel are to be used for each color. This is the default function used 926 * if the platform does not define its own version. 927 */ 928 static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel) 929 { 930 #define PF_BYTE_F 0x10000000 931 #define PF_ALPHA_C_MASK 0x0E000000 932 #define PF_ALPHA_C_SHIFT 25 933 #define PF_BLUE_C_MASK 0x01800000 934 #define PF_BLUE_C_SHIFT 23 935 #define PF_GREEN_C_MASK 0x00600000 936 #define PF_GREEN_C_SHIFT 21 937 #define PF_RED_C_MASK 0x00180000 938 #define PF_RED_C_SHIFT 19 939 #define PF_PALETTE 0x00040000 940 #define PF_PIXEL_S_MASK 0x00030000 941 #define PF_PIXEL_S_SHIFT 16 942 #define PF_COMP_3_MASK 0x0000F000 943 #define PF_COMP_3_SHIFT 12 944 #define PF_COMP_2_MASK 0x00000F00 945 #define PF_COMP_2_SHIFT 8 946 #define PF_COMP_1_MASK 0x000000F0 947 #define PF_COMP_1_SHIFT 4 948 #define PF_COMP_0_MASK 0x0000000F 949 #define PF_COMP_0_SHIFT 0 950 951 #define MAKE_PF(alpha, red, green, blue, size, c0, c1, c2, c3) \ 952 cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \ 953 (blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \ 954 (red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \ 955 (c2 << PF_COMP_2_SHIFT) | (c1 << PF_COMP_1_SHIFT) | \ 956 (c0 << PF_COMP_0_SHIFT) | (size << PF_PIXEL_S_SHIFT)) 957 958 switch (bits_per_pixel) { 959 case 32: 960 /* 0x88883316 */ 961 return MAKE_PF(3, 2, 1, 0, 3, 8, 8, 8, 8); 962 case 24: 963 /* 0x88082219 */ 964 return MAKE_PF(4, 0, 1, 2, 2, 8, 8, 8, 0); 965 case 16: 966 /* 0x65053118 */ 967 return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0); 968 default: 969 pr_err("fsl-diu: unsupported color depth %u\n", bits_per_pixel); 970 return 0; 971 } 972 } 973 974 /* 975 * Copies a cursor image from user space to the proper place in driver 976 * memory so that the hardware can display the cursor image. 977 * 978 * Cursor data is represented as a sequence of 'width' bits packed into bytes. 979 * That is, the first 8 bits are in the first byte, the second 8 bits in the 980 * second byte, and so on. Therefore, the each row of the cursor is (width + 981 * 7) / 8 bytes of 'data' 982 * 983 * The DIU only supports cursors up to 32x32 (MAX_CURS). We reject cursors 984 * larger than this, so we already know that 'width' <= 32. Therefore, we can 985 * simplify our code by using a 32-bit big-endian integer ("line") to read in 986 * a single line of pixels, and only look at the top 'width' bits of that 987 * integer. 988 * 989 * This could result in an unaligned 32-bit read. For example, if the cursor 990 * is 24x24, then the first three bytes of 'image' contain the pixel data for 991 * the top line of the cursor. We do a 32-bit read of 'image', but we look 992 * only at the top 24 bits. Then we increment 'image' by 3 bytes. The next 993 * read is unaligned. The only problem is that we might read past the end of 994 * 'image' by 1-3 bytes, but that should not cause any problems. 995 */ 996 static void fsl_diu_load_cursor_image(struct fb_info *info, 997 const void *image, uint16_t bg, uint16_t fg, 998 unsigned int width, unsigned int height) 999 { 1000 struct mfb_info *mfbi = info->par; 1001 struct fsl_diu_data *data = mfbi->parent; 1002 __le16 *cursor = data->cursor; 1003 __le16 _fg = cpu_to_le16(fg); 1004 __le16 _bg = cpu_to_le16(bg); 1005 unsigned int h, w; 1006 1007 for (h = 0; h < height; h++) { 1008 uint32_t mask = 1 << 31; 1009 uint32_t line = be32_to_cpup(image); 1010 1011 for (w = 0; w < width; w++) { 1012 cursor[w] = (line & mask) ? _fg : _bg; 1013 mask >>= 1; 1014 } 1015 1016 cursor += MAX_CURS; 1017 image += DIV_ROUND_UP(width, 8); 1018 } 1019 } 1020 1021 /* 1022 * Set a hardware cursor. The image data for the cursor is passed via the 1023 * fb_cursor object. 1024 */ 1025 static int fsl_diu_cursor(struct fb_info *info, struct fb_cursor *cursor) 1026 { 1027 struct mfb_info *mfbi = info->par; 1028 struct fsl_diu_data *data = mfbi->parent; 1029 struct diu __iomem *hw = data->diu_reg; 1030 1031 if (cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS) 1032 return -EINVAL; 1033 1034 /* The cursor size has changed */ 1035 if (cursor->set & FB_CUR_SETSIZE) { 1036 /* 1037 * The DIU cursor is a fixed size, so when we get this 1038 * message, instead of resizing the cursor, we just clear 1039 * all the image data, in expectation of new data. However, 1040 * in tests this control does not appear to be normally 1041 * called. 1042 */ 1043 memset(data->cursor, 0, sizeof(data->cursor)); 1044 } 1045 1046 /* The cursor position has changed (cursor->image.dx|dy) */ 1047 if (cursor->set & FB_CUR_SETPOS) { 1048 uint32_t xx, yy; 1049 1050 yy = (cursor->image.dy - info->var.yoffset) & 0x7ff; 1051 xx = (cursor->image.dx - info->var.xoffset) & 0x7ff; 1052 1053 out_be32(&hw->curs_pos, yy << 16 | xx); 1054 } 1055 1056 /* 1057 * FB_CUR_SETIMAGE - the cursor image has changed 1058 * FB_CUR_SETCMAP - the cursor colors has changed 1059 * FB_CUR_SETSHAPE - the cursor bitmask has changed 1060 */ 1061 if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETCMAP | FB_CUR_SETIMAGE)) { 1062 unsigned int image_size = 1063 DIV_ROUND_UP(cursor->image.width, 8) * cursor->image.height; 1064 unsigned int image_words = 1065 DIV_ROUND_UP(image_size, sizeof(uint32_t)); 1066 unsigned int bg_idx = cursor->image.bg_color; 1067 unsigned int fg_idx = cursor->image.fg_color; 1068 uint8_t buffer[image_size]; 1069 uint32_t *image, *source, *mask; 1070 uint16_t fg, bg; 1071 unsigned int i; 1072 1073 if (info->state != FBINFO_STATE_RUNNING) 1074 return 0; 1075 1076 /* 1077 * Determine the size of the cursor image data. Normally, 1078 * it's 8x16. 1079 */ 1080 image_size = DIV_ROUND_UP(cursor->image.width, 8) * 1081 cursor->image.height; 1082 1083 bg = ((info->cmap.red[bg_idx] & 0xf8) << 7) | 1084 ((info->cmap.green[bg_idx] & 0xf8) << 2) | 1085 ((info->cmap.blue[bg_idx] & 0xf8) >> 3) | 1086 1 << 15; 1087 1088 fg = ((info->cmap.red[fg_idx] & 0xf8) << 7) | 1089 ((info->cmap.green[fg_idx] & 0xf8) << 2) | 1090 ((info->cmap.blue[fg_idx] & 0xf8) >> 3) | 1091 1 << 15; 1092 1093 /* Use 32-bit operations on the data to improve performance */ 1094 image = (uint32_t *)buffer; 1095 source = (uint32_t *)cursor->image.data; 1096 mask = (uint32_t *)cursor->mask; 1097 1098 if (cursor->rop == ROP_XOR) 1099 for (i = 0; i < image_words; i++) 1100 image[i] = source[i] ^ mask[i]; 1101 else 1102 for (i = 0; i < image_words; i++) 1103 image[i] = source[i] & mask[i]; 1104 1105 fsl_diu_load_cursor_image(info, image, bg, fg, 1106 cursor->image.width, cursor->image.height); 1107 } 1108 1109 /* 1110 * Show or hide the cursor. The cursor data is always stored in the 1111 * 'cursor' memory block, and the actual cursor position is always in 1112 * the DIU's CURS_POS register. To hide the cursor, we redirect the 1113 * CURSOR register to a blank cursor. The show the cursor, we 1114 * redirect the CURSOR register to the real cursor data. 1115 */ 1116 if (cursor->enable) 1117 out_be32(&hw->cursor, DMA_ADDR(data, cursor)); 1118 else 1119 out_be32(&hw->cursor, DMA_ADDR(data, blank_cursor)); 1120 1121 return 0; 1122 } 1123 1124 /* 1125 * Using the fb_var_screeninfo in fb_info we set the resolution of this 1126 * particular framebuffer. This function alters the fb_fix_screeninfo stored 1127 * in fb_info. It does not alter var in fb_info since we are using that 1128 * data. This means we depend on the data in var inside fb_info to be 1129 * supported by the hardware. fsl_diu_check_var is always called before 1130 * fsl_diu_set_par to ensure this. 1131 */ 1132 static int fsl_diu_set_par(struct fb_info *info) 1133 { 1134 unsigned long len; 1135 struct fb_var_screeninfo *var = &info->var; 1136 struct mfb_info *mfbi = info->par; 1137 struct fsl_diu_data *data = mfbi->parent; 1138 struct diu_ad *ad = mfbi->ad; 1139 struct diu __iomem *hw; 1140 1141 hw = data->diu_reg; 1142 1143 set_fix(info); 1144 1145 len = info->var.yres_virtual * info->fix.line_length; 1146 /* Alloc & dealloc each time resolution/bpp change */ 1147 if (len != info->fix.smem_len) { 1148 if (info->fix.smem_start) 1149 unmap_video_memory(info); 1150 1151 /* Memory allocation for framebuffer */ 1152 if (map_video_memory(info)) { 1153 dev_err(info->dev, "unable to allocate fb memory 1\n"); 1154 return -ENOMEM; 1155 } 1156 } 1157 1158 if (diu_ops.get_pixel_format) 1159 ad->pix_fmt = diu_ops.get_pixel_format(data->monitor_port, 1160 var->bits_per_pixel); 1161 else 1162 ad->pix_fmt = fsl_diu_get_pixel_format(var->bits_per_pixel); 1163 1164 ad->addr = cpu_to_le32(info->fix.smem_start); 1165 ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) | 1166 var->xres_virtual) | mfbi->g_alpha; 1167 /* AOI should not be greater than display size */ 1168 ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres); 1169 ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); 1170 ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); 1171 1172 /* Disable chroma keying function */ 1173 ad->ckmax_r = 0; 1174 ad->ckmax_g = 0; 1175 ad->ckmax_b = 0; 1176 1177 ad->ckmin_r = 255; 1178 ad->ckmin_g = 255; 1179 ad->ckmin_b = 255; 1180 1181 if (mfbi->index == PLANE0) 1182 update_lcdc(info); 1183 return 0; 1184 } 1185 1186 static inline __u32 CNVT_TOHW(__u32 val, __u32 width) 1187 { 1188 return ((val << width) + 0x7FFF - val) >> 16; 1189 } 1190 1191 /* 1192 * Set a single color register. The values supplied have a 16 bit magnitude 1193 * which needs to be scaled in this function for the hardware. Things to take 1194 * into consideration are how many color registers, if any, are supported with 1195 * the current color visual. With truecolor mode no color palettes are 1196 * supported. Here a pseudo palette is created which we store the value in 1197 * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited 1198 * color palette. 1199 */ 1200 static int fsl_diu_setcolreg(unsigned int regno, unsigned int red, 1201 unsigned int green, unsigned int blue, 1202 unsigned int transp, struct fb_info *info) 1203 { 1204 int ret = 1; 1205 1206 /* 1207 * If greyscale is true, then we convert the RGB value 1208 * to greyscale no matter what visual we are using. 1209 */ 1210 if (info->var.grayscale) 1211 red = green = blue = (19595 * red + 38470 * green + 1212 7471 * blue) >> 16; 1213 switch (info->fix.visual) { 1214 case FB_VISUAL_TRUECOLOR: 1215 /* 1216 * 16-bit True Colour. We encode the RGB value 1217 * according to the RGB bitfield information. 1218 */ 1219 if (regno < 16) { 1220 u32 *pal = info->pseudo_palette; 1221 u32 v; 1222 1223 red = CNVT_TOHW(red, info->var.red.length); 1224 green = CNVT_TOHW(green, info->var.green.length); 1225 blue = CNVT_TOHW(blue, info->var.blue.length); 1226 transp = CNVT_TOHW(transp, info->var.transp.length); 1227 1228 v = (red << info->var.red.offset) | 1229 (green << info->var.green.offset) | 1230 (blue << info->var.blue.offset) | 1231 (transp << info->var.transp.offset); 1232 1233 pal[regno] = v; 1234 ret = 0; 1235 } 1236 break; 1237 } 1238 1239 return ret; 1240 } 1241 1242 /* 1243 * Pan (or wrap, depending on the `vmode' field) the display using the 1244 * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values 1245 * don't fit, return -EINVAL. 1246 */ 1247 static int fsl_diu_pan_display(struct fb_var_screeninfo *var, 1248 struct fb_info *info) 1249 { 1250 if ((info->var.xoffset == var->xoffset) && 1251 (info->var.yoffset == var->yoffset)) 1252 return 0; /* No change, do nothing */ 1253 1254 if (var->xoffset < 0 || var->yoffset < 0 1255 || var->xoffset + info->var.xres > info->var.xres_virtual 1256 || var->yoffset + info->var.yres > info->var.yres_virtual) 1257 return -EINVAL; 1258 1259 info->var.xoffset = var->xoffset; 1260 info->var.yoffset = var->yoffset; 1261 1262 if (var->vmode & FB_VMODE_YWRAP) 1263 info->var.vmode |= FB_VMODE_YWRAP; 1264 else 1265 info->var.vmode &= ~FB_VMODE_YWRAP; 1266 1267 fsl_diu_set_aoi(info); 1268 1269 return 0; 1270 } 1271 1272 static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd, 1273 unsigned long arg) 1274 { 1275 struct mfb_info *mfbi = info->par; 1276 struct diu_ad *ad = mfbi->ad; 1277 struct mfb_chroma_key ck; 1278 unsigned char global_alpha; 1279 struct aoi_display_offset aoi_d; 1280 __u32 pix_fmt; 1281 void __user *buf = (void __user *)arg; 1282 1283 if (!arg) 1284 return -EINVAL; 1285 1286 dev_dbg(info->dev, "ioctl %08x (dir=%s%s type=%u nr=%u size=%u)\n", cmd, 1287 _IOC_DIR(cmd) & _IOC_READ ? "R" : "", 1288 _IOC_DIR(cmd) & _IOC_WRITE ? "W" : "", 1289 _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd)); 1290 1291 switch (cmd) { 1292 case MFB_SET_PIXFMT_OLD: 1293 dev_warn(info->dev, 1294 "MFB_SET_PIXFMT value of 0x%08x is deprecated.\n", 1295 MFB_SET_PIXFMT_OLD); 1296 case MFB_SET_PIXFMT: 1297 if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt))) 1298 return -EFAULT; 1299 ad->pix_fmt = pix_fmt; 1300 break; 1301 case MFB_GET_PIXFMT_OLD: 1302 dev_warn(info->dev, 1303 "MFB_GET_PIXFMT value of 0x%08x is deprecated.\n", 1304 MFB_GET_PIXFMT_OLD); 1305 case MFB_GET_PIXFMT: 1306 pix_fmt = ad->pix_fmt; 1307 if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt))) 1308 return -EFAULT; 1309 break; 1310 case MFB_SET_AOID: 1311 if (copy_from_user(&aoi_d, buf, sizeof(aoi_d))) 1312 return -EFAULT; 1313 mfbi->x_aoi_d = aoi_d.x_aoi_d; 1314 mfbi->y_aoi_d = aoi_d.y_aoi_d; 1315 fsl_diu_check_var(&info->var, info); 1316 fsl_diu_set_aoi(info); 1317 break; 1318 case MFB_GET_AOID: 1319 aoi_d.x_aoi_d = mfbi->x_aoi_d; 1320 aoi_d.y_aoi_d = mfbi->y_aoi_d; 1321 if (copy_to_user(buf, &aoi_d, sizeof(aoi_d))) 1322 return -EFAULT; 1323 break; 1324 case MFB_GET_ALPHA: 1325 global_alpha = mfbi->g_alpha; 1326 if (copy_to_user(buf, &global_alpha, sizeof(global_alpha))) 1327 return -EFAULT; 1328 break; 1329 case MFB_SET_ALPHA: 1330 /* set panel information */ 1331 if (copy_from_user(&global_alpha, buf, sizeof(global_alpha))) 1332 return -EFAULT; 1333 ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) | 1334 (global_alpha & 0xff); 1335 mfbi->g_alpha = global_alpha; 1336 break; 1337 case MFB_SET_CHROMA_KEY: 1338 /* set panel winformation */ 1339 if (copy_from_user(&ck, buf, sizeof(ck))) 1340 return -EFAULT; 1341 1342 if (ck.enable && 1343 (ck.red_max < ck.red_min || 1344 ck.green_max < ck.green_min || 1345 ck.blue_max < ck.blue_min)) 1346 return -EINVAL; 1347 1348 if (!ck.enable) { 1349 ad->ckmax_r = 0; 1350 ad->ckmax_g = 0; 1351 ad->ckmax_b = 0; 1352 ad->ckmin_r = 255; 1353 ad->ckmin_g = 255; 1354 ad->ckmin_b = 255; 1355 } else { 1356 ad->ckmax_r = ck.red_max; 1357 ad->ckmax_g = ck.green_max; 1358 ad->ckmax_b = ck.blue_max; 1359 ad->ckmin_r = ck.red_min; 1360 ad->ckmin_g = ck.green_min; 1361 ad->ckmin_b = ck.blue_min; 1362 } 1363 break; 1364 #ifdef CONFIG_PPC_MPC512x 1365 case MFB_SET_GAMMA: { 1366 struct fsl_diu_data *data = mfbi->parent; 1367 1368 if (copy_from_user(data->gamma, buf, sizeof(data->gamma))) 1369 return -EFAULT; 1370 setbits32(&data->diu_reg->gamma, 0); /* Force table reload */ 1371 break; 1372 } 1373 case MFB_GET_GAMMA: { 1374 struct fsl_diu_data *data = mfbi->parent; 1375 1376 if (copy_to_user(buf, data->gamma, sizeof(data->gamma))) 1377 return -EFAULT; 1378 break; 1379 } 1380 #endif 1381 default: 1382 dev_err(info->dev, "unknown ioctl command (0x%08X)\n", cmd); 1383 return -ENOIOCTLCMD; 1384 } 1385 1386 return 0; 1387 } 1388 1389 static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data) 1390 { 1391 u32 int_mask = INT_UNDRUN; /* enable underrun detection */ 1392 1393 if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE)) 1394 int_mask |= INT_VSYNC; /* enable vertical sync */ 1395 1396 clrbits32(&data->diu_reg->int_mask, int_mask); 1397 } 1398 1399 /* turn on fb if count == 1 1400 */ 1401 static int fsl_diu_open(struct fb_info *info, int user) 1402 { 1403 struct mfb_info *mfbi = info->par; 1404 int res = 0; 1405 1406 /* free boot splash memory on first /dev/fb0 open */ 1407 if ((mfbi->index == PLANE0) && diu_ops.release_bootmem) 1408 diu_ops.release_bootmem(); 1409 1410 spin_lock(&diu_lock); 1411 mfbi->count++; 1412 if (mfbi->count == 1) { 1413 fsl_diu_check_var(&info->var, info); 1414 res = fsl_diu_set_par(info); 1415 if (res < 0) 1416 mfbi->count--; 1417 else { 1418 fsl_diu_enable_interrupts(mfbi->parent); 1419 fsl_diu_enable_panel(info); 1420 } 1421 } 1422 1423 spin_unlock(&diu_lock); 1424 return res; 1425 } 1426 1427 /* turn off fb if count == 0 1428 */ 1429 static int fsl_diu_release(struct fb_info *info, int user) 1430 { 1431 struct mfb_info *mfbi = info->par; 1432 int res = 0; 1433 1434 spin_lock(&diu_lock); 1435 mfbi->count--; 1436 if (mfbi->count == 0) { 1437 struct fsl_diu_data *data = mfbi->parent; 1438 bool disable = true; 1439 int i; 1440 1441 /* Disable interrupts only if all AOIs are closed */ 1442 for (i = 0; i < NUM_AOIS; i++) { 1443 struct mfb_info *mi = data->fsl_diu_info[i].par; 1444 1445 if (mi->count) 1446 disable = false; 1447 } 1448 if (disable) 1449 out_be32(&data->diu_reg->int_mask, 0xffffffff); 1450 fsl_diu_disable_panel(info); 1451 } 1452 1453 spin_unlock(&diu_lock); 1454 return res; 1455 } 1456 1457 static struct fb_ops fsl_diu_ops = { 1458 .owner = THIS_MODULE, 1459 .fb_check_var = fsl_diu_check_var, 1460 .fb_set_par = fsl_diu_set_par, 1461 .fb_setcolreg = fsl_diu_setcolreg, 1462 .fb_pan_display = fsl_diu_pan_display, 1463 .fb_fillrect = cfb_fillrect, 1464 .fb_copyarea = cfb_copyarea, 1465 .fb_imageblit = cfb_imageblit, 1466 .fb_ioctl = fsl_diu_ioctl, 1467 .fb_open = fsl_diu_open, 1468 .fb_release = fsl_diu_release, 1469 .fb_cursor = fsl_diu_cursor, 1470 }; 1471 1472 static int install_fb(struct fb_info *info) 1473 { 1474 int rc; 1475 struct mfb_info *mfbi = info->par; 1476 struct fsl_diu_data *data = mfbi->parent; 1477 const char *aoi_mode, *init_aoi_mode = "320x240"; 1478 struct fb_videomode *db = fsl_diu_mode_db; 1479 unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db); 1480 int has_default_mode = 1; 1481 1482 info->var.activate = FB_ACTIVATE_NOW; 1483 info->fbops = &fsl_diu_ops; 1484 info->flags = FBINFO_DEFAULT | FBINFO_VIRTFB | FBINFO_PARTIAL_PAN_OK | 1485 FBINFO_READS_FAST; 1486 info->pseudo_palette = mfbi->pseudo_palette; 1487 1488 rc = fb_alloc_cmap(&info->cmap, 16, 0); 1489 if (rc) 1490 return rc; 1491 1492 if (mfbi->index == PLANE0) { 1493 if (data->has_edid) { 1494 /* Now build modedb from EDID */ 1495 fb_edid_to_monspecs(data->edid_data, &info->monspecs); 1496 fb_videomode_to_modelist(info->monspecs.modedb, 1497 info->monspecs.modedb_len, 1498 &info->modelist); 1499 db = info->monspecs.modedb; 1500 dbsize = info->monspecs.modedb_len; 1501 } 1502 aoi_mode = fb_mode; 1503 } else { 1504 aoi_mode = init_aoi_mode; 1505 } 1506 rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL, 1507 default_bpp); 1508 if (!rc) { 1509 /* 1510 * For plane 0 we continue and look into 1511 * driver's internal modedb. 1512 */ 1513 if ((mfbi->index == PLANE0) && data->has_edid) 1514 has_default_mode = 0; 1515 else 1516 return -EINVAL; 1517 } 1518 1519 if (!has_default_mode) { 1520 rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, 1521 ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp); 1522 if (rc) 1523 has_default_mode = 1; 1524 } 1525 1526 /* Still not found, use preferred mode from database if any */ 1527 if (!has_default_mode && info->monspecs.modedb) { 1528 struct fb_monspecs *specs = &info->monspecs; 1529 struct fb_videomode *modedb = &specs->modedb[0]; 1530 1531 /* 1532 * Get preferred timing. If not found, 1533 * first mode in database will be used. 1534 */ 1535 if (specs->misc & FB_MISC_1ST_DETAIL) { 1536 int i; 1537 1538 for (i = 0; i < specs->modedb_len; i++) { 1539 if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { 1540 modedb = &specs->modedb[i]; 1541 break; 1542 } 1543 } 1544 } 1545 1546 info->var.bits_per_pixel = default_bpp; 1547 fb_videomode_to_var(&info->var, modedb); 1548 } 1549 1550 if (fsl_diu_check_var(&info->var, info)) { 1551 dev_err(info->dev, "fsl_diu_check_var failed\n"); 1552 unmap_video_memory(info); 1553 fb_dealloc_cmap(&info->cmap); 1554 return -EINVAL; 1555 } 1556 1557 if (register_framebuffer(info) < 0) { 1558 dev_err(info->dev, "register_framebuffer failed\n"); 1559 unmap_video_memory(info); 1560 fb_dealloc_cmap(&info->cmap); 1561 return -EINVAL; 1562 } 1563 1564 mfbi->registered = 1; 1565 dev_info(info->dev, "%s registered successfully\n", mfbi->id); 1566 1567 return 0; 1568 } 1569 1570 static void uninstall_fb(struct fb_info *info) 1571 { 1572 struct mfb_info *mfbi = info->par; 1573 1574 if (!mfbi->registered) 1575 return; 1576 1577 unregister_framebuffer(info); 1578 unmap_video_memory(info); 1579 if (&info->cmap) 1580 fb_dealloc_cmap(&info->cmap); 1581 1582 mfbi->registered = 0; 1583 } 1584 1585 static irqreturn_t fsl_diu_isr(int irq, void *dev_id) 1586 { 1587 struct diu __iomem *hw = dev_id; 1588 uint32_t status = in_be32(&hw->int_status); 1589 1590 if (status) { 1591 /* This is the workaround for underrun */ 1592 if (status & INT_UNDRUN) { 1593 out_be32(&hw->diu_mode, 0); 1594 udelay(1); 1595 out_be32(&hw->diu_mode, 1); 1596 } 1597 #if defined(CONFIG_NOT_COHERENT_CACHE) 1598 else if (status & INT_VSYNC) { 1599 unsigned int i; 1600 1601 for (i = 0; i < coherence_data_size; 1602 i += d_cache_line_size) 1603 __asm__ __volatile__ ( 1604 "dcbz 0, %[input]" 1605 ::[input]"r"(&coherence_data[i])); 1606 } 1607 #endif 1608 return IRQ_HANDLED; 1609 } 1610 return IRQ_NONE; 1611 } 1612 1613 #ifdef CONFIG_PM 1614 /* 1615 * Power management hooks. Note that we won't be called from IRQ context, 1616 * unlike the blank functions above, so we may sleep. 1617 */ 1618 static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state) 1619 { 1620 struct fsl_diu_data *data; 1621 1622 data = dev_get_drvdata(&ofdev->dev); 1623 disable_lcdc(data->fsl_diu_info); 1624 1625 return 0; 1626 } 1627 1628 static int fsl_diu_resume(struct platform_device *ofdev) 1629 { 1630 struct fsl_diu_data *data; 1631 1632 data = dev_get_drvdata(&ofdev->dev); 1633 enable_lcdc(data->fsl_diu_info); 1634 1635 return 0; 1636 } 1637 1638 #else 1639 #define fsl_diu_suspend NULL 1640 #define fsl_diu_resume NULL 1641 #endif /* CONFIG_PM */ 1642 1643 static ssize_t store_monitor(struct device *device, 1644 struct device_attribute *attr, const char *buf, size_t count) 1645 { 1646 enum fsl_diu_monitor_port old_monitor_port; 1647 struct fsl_diu_data *data = 1648 container_of(attr, struct fsl_diu_data, dev_attr); 1649 1650 old_monitor_port = data->monitor_port; 1651 data->monitor_port = fsl_diu_name_to_port(buf); 1652 1653 if (old_monitor_port != data->monitor_port) { 1654 /* All AOIs need adjust pixel format 1655 * fsl_diu_set_par only change the pixsel format here 1656 * unlikely to fail. */ 1657 unsigned int i; 1658 1659 for (i=0; i < NUM_AOIS; i++) 1660 fsl_diu_set_par(&data->fsl_diu_info[i]); 1661 } 1662 return count; 1663 } 1664 1665 static ssize_t show_monitor(struct device *device, 1666 struct device_attribute *attr, char *buf) 1667 { 1668 struct fsl_diu_data *data = 1669 container_of(attr, struct fsl_diu_data, dev_attr); 1670 1671 switch (data->monitor_port) { 1672 case FSL_DIU_PORT_DVI: 1673 return sprintf(buf, "DVI\n"); 1674 case FSL_DIU_PORT_LVDS: 1675 return sprintf(buf, "Single-link LVDS\n"); 1676 case FSL_DIU_PORT_DLVDS: 1677 return sprintf(buf, "Dual-link LVDS\n"); 1678 } 1679 1680 return 0; 1681 } 1682 1683 static int fsl_diu_probe(struct platform_device *pdev) 1684 { 1685 struct device_node *np = pdev->dev.of_node; 1686 struct mfb_info *mfbi; 1687 struct fsl_diu_data *data; 1688 dma_addr_t dma_addr; /* DMA addr of fsl_diu_data struct */ 1689 const void *prop; 1690 unsigned int i; 1691 int ret; 1692 1693 data = dmam_alloc_coherent(&pdev->dev, sizeof(struct fsl_diu_data), 1694 &dma_addr, GFP_DMA | __GFP_ZERO); 1695 if (!data) 1696 return -ENOMEM; 1697 data->dma_addr = dma_addr; 1698 1699 /* 1700 * dma_alloc_coherent() uses a page allocator, so the address is 1701 * always page-aligned. We need the memory to be 32-byte aligned, 1702 * so that's good. However, if one day the allocator changes, we 1703 * need to catch that. It's not worth the effort to handle unaligned 1704 * alloctions now because it's highly unlikely to ever be a problem. 1705 */ 1706 if ((unsigned long)data & 31) { 1707 dev_err(&pdev->dev, "misaligned allocation"); 1708 ret = -ENOMEM; 1709 goto error; 1710 } 1711 1712 spin_lock_init(&data->reg_lock); 1713 1714 for (i = 0; i < NUM_AOIS; i++) { 1715 struct fb_info *info = &data->fsl_diu_info[i]; 1716 1717 info->device = &pdev->dev; 1718 info->par = &data->mfb[i]; 1719 1720 /* 1721 * We store the physical address of the AD in the reserved 1722 * 'paddr' field of the AD itself. 1723 */ 1724 data->ad[i].paddr = DMA_ADDR(data, ad[i]); 1725 1726 info->fix.smem_start = 0; 1727 1728 /* Initialize the AOI data structure */ 1729 mfbi = info->par; 1730 memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info)); 1731 mfbi->parent = data; 1732 mfbi->ad = &data->ad[i]; 1733 } 1734 1735 /* Get the EDID data from the device tree, if present */ 1736 prop = of_get_property(np, "edid", &ret); 1737 if (prop && ret == EDID_LENGTH) { 1738 memcpy(data->edid_data, prop, EDID_LENGTH); 1739 data->has_edid = true; 1740 } 1741 1742 data->diu_reg = of_iomap(np, 0); 1743 if (!data->diu_reg) { 1744 dev_err(&pdev->dev, "cannot map DIU registers\n"); 1745 ret = -EFAULT; 1746 goto error; 1747 } 1748 1749 /* Get the IRQ of the DIU */ 1750 data->irq = irq_of_parse_and_map(np, 0); 1751 1752 if (!data->irq) { 1753 dev_err(&pdev->dev, "could not get DIU IRQ\n"); 1754 ret = -EINVAL; 1755 goto error; 1756 } 1757 data->monitor_port = monitor_port; 1758 1759 /* Initialize the dummy Area Descriptor */ 1760 data->dummy_ad.addr = cpu_to_le32(DMA_ADDR(data, dummy_aoi)); 1761 data->dummy_ad.pix_fmt = 0x88882317; 1762 data->dummy_ad.src_size_g_alpha = cpu_to_le32((4 << 12) | 4); 1763 data->dummy_ad.aoi_size = cpu_to_le32((4 << 16) | 2); 1764 data->dummy_ad.offset_xyi = 0; 1765 data->dummy_ad.offset_xyd = 0; 1766 data->dummy_ad.next_ad = 0; 1767 data->dummy_ad.paddr = DMA_ADDR(data, dummy_ad); 1768 1769 /* 1770 * Let DIU continue to display splash screen if it was pre-initialized 1771 * by the bootloader; otherwise, clear the display. 1772 */ 1773 if (in_be32(&data->diu_reg->diu_mode) == MFB_MODE0) 1774 out_be32(&data->diu_reg->desc[0], 0); 1775 1776 out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr); 1777 out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr); 1778 1779 /* 1780 * Older versions of U-Boot leave interrupts enabled, so disable 1781 * all of them and clear the status register. 1782 */ 1783 out_be32(&data->diu_reg->int_mask, 0xffffffff); 1784 in_be32(&data->diu_reg->int_status); 1785 1786 ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb", 1787 data->diu_reg); 1788 if (ret) { 1789 dev_err(&pdev->dev, "could not claim irq\n"); 1790 goto error; 1791 } 1792 1793 for (i = 0; i < NUM_AOIS; i++) { 1794 ret = install_fb(&data->fsl_diu_info[i]); 1795 if (ret) { 1796 dev_err(&pdev->dev, "could not register fb %d\n", i); 1797 free_irq(data->irq, data->diu_reg); 1798 goto error; 1799 } 1800 } 1801 1802 sysfs_attr_init(&data->dev_attr.attr); 1803 data->dev_attr.attr.name = "monitor"; 1804 data->dev_attr.attr.mode = S_IRUGO|S_IWUSR; 1805 data->dev_attr.show = show_monitor; 1806 data->dev_attr.store = store_monitor; 1807 ret = device_create_file(&pdev->dev, &data->dev_attr); 1808 if (ret) { 1809 dev_err(&pdev->dev, "could not create sysfs file %s\n", 1810 data->dev_attr.attr.name); 1811 } 1812 1813 dev_set_drvdata(&pdev->dev, data); 1814 return 0; 1815 1816 error: 1817 for (i = 0; i < NUM_AOIS; i++) 1818 uninstall_fb(&data->fsl_diu_info[i]); 1819 1820 iounmap(data->diu_reg); 1821 1822 return ret; 1823 } 1824 1825 static int fsl_diu_remove(struct platform_device *pdev) 1826 { 1827 struct fsl_diu_data *data; 1828 int i; 1829 1830 data = dev_get_drvdata(&pdev->dev); 1831 disable_lcdc(&data->fsl_diu_info[0]); 1832 1833 free_irq(data->irq, data->diu_reg); 1834 1835 for (i = 0; i < NUM_AOIS; i++) 1836 uninstall_fb(&data->fsl_diu_info[i]); 1837 1838 iounmap(data->diu_reg); 1839 1840 return 0; 1841 } 1842 1843 #ifndef MODULE 1844 static int __init fsl_diu_setup(char *options) 1845 { 1846 char *opt; 1847 unsigned long val; 1848 1849 if (!options || !*options) 1850 return 0; 1851 1852 while ((opt = strsep(&options, ",")) != NULL) { 1853 if (!*opt) 1854 continue; 1855 if (!strncmp(opt, "monitor=", 8)) { 1856 monitor_port = fsl_diu_name_to_port(opt + 8); 1857 } else if (!strncmp(opt, "bpp=", 4)) { 1858 if (!kstrtoul(opt + 4, 10, &val)) 1859 default_bpp = val; 1860 } else 1861 fb_mode = opt; 1862 } 1863 1864 return 0; 1865 } 1866 #endif 1867 1868 static struct of_device_id fsl_diu_match[] = { 1869 #ifdef CONFIG_PPC_MPC512x 1870 { 1871 .compatible = "fsl,mpc5121-diu", 1872 }, 1873 #endif 1874 { 1875 .compatible = "fsl,diu", 1876 }, 1877 {} 1878 }; 1879 MODULE_DEVICE_TABLE(of, fsl_diu_match); 1880 1881 static struct platform_driver fsl_diu_driver = { 1882 .driver = { 1883 .name = "fsl-diu-fb", 1884 .owner = THIS_MODULE, 1885 .of_match_table = fsl_diu_match, 1886 }, 1887 .probe = fsl_diu_probe, 1888 .remove = fsl_diu_remove, 1889 .suspend = fsl_diu_suspend, 1890 .resume = fsl_diu_resume, 1891 }; 1892 1893 static int __init fsl_diu_init(void) 1894 { 1895 #ifdef CONFIG_NOT_COHERENT_CACHE 1896 struct device_node *np; 1897 const u32 *prop; 1898 #endif 1899 int ret; 1900 #ifndef MODULE 1901 char *option; 1902 1903 /* 1904 * For kernel boot options (in 'video=xxxfb:<options>' format) 1905 */ 1906 if (fb_get_options("fslfb", &option)) 1907 return -ENODEV; 1908 fsl_diu_setup(option); 1909 #else 1910 monitor_port = fsl_diu_name_to_port(monitor_string); 1911 #endif 1912 pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n"); 1913 1914 #ifdef CONFIG_NOT_COHERENT_CACHE 1915 np = of_find_node_by_type(NULL, "cpu"); 1916 if (!np) { 1917 pr_err("fsl-diu-fb: can't find 'cpu' device node\n"); 1918 return -ENODEV; 1919 } 1920 1921 prop = of_get_property(np, "d-cache-size", NULL); 1922 if (prop == NULL) { 1923 pr_err("fsl-diu-fb: missing 'd-cache-size' property' " 1924 "in 'cpu' node\n"); 1925 of_node_put(np); 1926 return -ENODEV; 1927 } 1928 1929 /* 1930 * Freescale PLRU requires 13/8 times the cache size to do a proper 1931 * displacement flush 1932 */ 1933 coherence_data_size = be32_to_cpup(prop) * 13; 1934 coherence_data_size /= 8; 1935 1936 pr_debug("fsl-diu-fb: coherence data size is %zu bytes\n", 1937 coherence_data_size); 1938 1939 prop = of_get_property(np, "d-cache-line-size", NULL); 1940 if (prop == NULL) { 1941 pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' " 1942 "in 'cpu' node\n"); 1943 of_node_put(np); 1944 return -ENODEV; 1945 } 1946 d_cache_line_size = be32_to_cpup(prop); 1947 1948 pr_debug("fsl-diu-fb: cache lines size is %u bytes\n", 1949 d_cache_line_size); 1950 1951 of_node_put(np); 1952 coherence_data = vmalloc(coherence_data_size); 1953 if (!coherence_data) { 1954 pr_err("fsl-diu-fb: could not allocate coherence data " 1955 "(size=%zu)\n", coherence_data_size); 1956 return -ENOMEM; 1957 } 1958 1959 #endif 1960 1961 ret = platform_driver_register(&fsl_diu_driver); 1962 if (ret) { 1963 pr_err("fsl-diu-fb: failed to register platform driver\n"); 1964 #if defined(CONFIG_NOT_COHERENT_CACHE) 1965 vfree(coherence_data); 1966 #endif 1967 } 1968 return ret; 1969 } 1970 1971 static void __exit fsl_diu_exit(void) 1972 { 1973 platform_driver_unregister(&fsl_diu_driver); 1974 #if defined(CONFIG_NOT_COHERENT_CACHE) 1975 vfree(coherence_data); 1976 #endif 1977 } 1978 1979 module_init(fsl_diu_init); 1980 module_exit(fsl_diu_exit); 1981 1982 MODULE_AUTHOR("York Sun <yorksun@freescale.com>"); 1983 MODULE_DESCRIPTION("Freescale DIU framebuffer driver"); 1984 MODULE_LICENSE("GPL"); 1985 1986 module_param_named(mode, fb_mode, charp, 0); 1987 MODULE_PARM_DESC(mode, 1988 "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); 1989 module_param_named(bpp, default_bpp, ulong, 0); 1990 MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'"); 1991 module_param_named(monitor, monitor_string, charp, 0); 1992 MODULE_PARM_DESC(monitor, "Specify the monitor port " 1993 "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform"); 1994 1995