xref: /openbmc/linux/drivers/video/fbdev/dnfb.c (revision be709d48)
1 #include <linux/kernel.h>
2 #include <linux/errno.h>
3 #include <linux/string.h>
4 #include <linux/mm.h>
5 #include <linux/delay.h>
6 #include <linux/interrupt.h>
7 #include <linux/platform_device.h>
8 
9 #include <asm/setup.h>
10 #include <asm/irq.h>
11 #include <asm/amigahw.h>
12 #include <asm/amigaints.h>
13 #include <asm/apollohw.h>
14 #include <linux/fb.h>
15 #include <linux/module.h>
16 
17 /* apollo video HW definitions */
18 
19 /*
20  * Control Registers.   IOBASE + $x
21  *
22  * Note: these are the Memory/IO BASE definitions for a mono card set to the
23  * alternate address
24  *
25  * Control 3A and 3B serve identical functions except that 3A
26  * deals with control 1 and 3b deals with Color LUT reg.
27  */
28 
29 #define AP_IOBASE       0x3b0	/* Base address of 1 plane board. */
30 #define AP_STATUS       isaIO2mem(AP_IOBASE+0)	/* Status register.  Read */
31 #define AP_WRITE_ENABLE isaIO2mem(AP_IOBASE+0)	/* Write Enable Register Write */
32 #define AP_DEVICE_ID    isaIO2mem(AP_IOBASE+1)	/* Device ID Register. Read */
33 #define AP_ROP_1        isaIO2mem(AP_IOBASE+2)	/* Raster Operation reg. Write Word */
34 #define AP_DIAG_MEM_REQ isaIO2mem(AP_IOBASE+4)	/* Diagnostic Memory Request. Write Word */
35 #define AP_CONTROL_0    isaIO2mem(AP_IOBASE+8)	/* Control Register 0.  Read/Write */
36 #define AP_CONTROL_1    isaIO2mem(AP_IOBASE+0xa)	/* Control Register 1.  Read/Write */
37 #define AP_CONTROL_3A   isaIO2mem(AP_IOBASE+0xe)	/* Control Register 3a. Read/Write */
38 #define AP_CONTROL_2    isaIO2mem(AP_IOBASE+0xc)	/* Control Register 2. Read/Write */
39 
40 
41 #define FRAME_BUFFER_START 0x0FA0000
42 #define FRAME_BUFFER_LEN 0x40000
43 
44 /* CREG 0 */
45 #define VECTOR_MODE 0x40	/* 010x.xxxx */
46 #define DBLT_MODE   0x80	/* 100x.xxxx */
47 #define NORMAL_MODE 0xE0	/* 111x.xxxx */
48 #define SHIFT_BITS  0x1F	/* xxx1.1111 */
49 	/* other bits are Shift value */
50 
51 /* CREG 1 */
52 #define AD_BLT      0x80	/* 1xxx.xxxx */
53 #define NORMAL      0x80 /* 1xxx.xxxx */	/* What is happening here ?? */
54 #define INVERSE     0x00 /* 0xxx.xxxx */	/* Clearing this reverses the screen */
55 #define PIX_BLT     0x00	/* 0xxx.xxxx */
56 
57 #define AD_HIBIT        0x40	/* xIxx.xxxx */
58 
59 #define ROP_EN          0x10	/* xxx1.xxxx */
60 #define DST_EQ_SRC      0x00	/* xxx0.xxxx */
61 #define nRESET_SYNC     0x08	/* xxxx.1xxx */
62 #define SYNC_ENAB       0x02	/* xxxx.xx1x */
63 
64 #define BLANK_DISP      0x00	/* xxxx.xxx0 */
65 #define ENAB_DISP       0x01	/* xxxx.xxx1 */
66 
67 #define NORM_CREG1      (nRESET_SYNC | SYNC_ENAB | ENAB_DISP)	/* no reset sync */
68 
69 /* CREG 2 */
70 
71 /*
72  * Following 3 defines are common to 1, 4 and 8 plane.
73  */
74 
75 #define S_DATA_1s   0x00 /* 00xx.xxxx */	/* set source to all 1's -- vector drawing */
76 #define S_DATA_PIX  0x40 /* 01xx.xxxx */	/* takes source from ls-bits and replicates over 16 bits */
77 #define S_DATA_PLN  0xC0 /* 11xx.xxxx */	/* normal, each data access =16-bits in
78 						   one plane of image mem */
79 
80 /* CREG 3A/CREG 3B */
81 #       define RESET_CREG 0x80	/* 1000.0000 */
82 
83 /* ROP REG  -  all one nibble */
84 /*      ********* NOTE : this is used r0,r1,r2,r3 *********** */
85 #define ROP(r2,r3,r0,r1) ( (U_SHORT)((r0)|((r1)<<4)|((r2)<<8)|((r3)<<12)) )
86 #define DEST_ZERO               0x0
87 #define SRC_AND_DEST    0x1
88 #define SRC_AND_nDEST   0x2
89 #define SRC                             0x3
90 #define nSRC_AND_DEST   0x4
91 #define DEST                    0x5
92 #define SRC_XOR_DEST    0x6
93 #define SRC_OR_DEST             0x7
94 #define SRC_NOR_DEST    0x8
95 #define SRC_XNOR_DEST   0x9
96 #define nDEST                   0xA
97 #define SRC_OR_nDEST    0xB
98 #define nSRC                    0xC
99 #define nSRC_OR_DEST    0xD
100 #define SRC_NAND_DEST   0xE
101 #define DEST_ONE                0xF
102 
103 #define SWAP(A) ((A>>8) | ((A&0xff) <<8))
104 
105 /* frame buffer operations */
106 
107 static int dnfb_blank(int blank, struct fb_info *info);
108 static void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
109 
110 static struct fb_ops dn_fb_ops = {
111 	.owner		= THIS_MODULE,
112 	.fb_blank	= dnfb_blank,
113 	.fb_fillrect	= cfb_fillrect,
114 	.fb_copyarea	= dnfb_copyarea,
115 	.fb_imageblit	= cfb_imageblit,
116 };
117 
118 static const struct fb_var_screeninfo dnfb_var = {
119 	.xres		= 1280,
120 	.yres		= 1024,
121 	.xres_virtual	= 2048,
122 	.yres_virtual	= 1024,
123 	.bits_per_pixel	= 1,
124 	.height		= -1,
125 	.width		= -1,
126 	.vmode		= FB_VMODE_NONINTERLACED,
127 };
128 
129 static const struct fb_fix_screeninfo dnfb_fix = {
130 	.id		= "Apollo Mono",
131 	.smem_start	= (FRAME_BUFFER_START + IO_BASE),
132 	.smem_len	= FRAME_BUFFER_LEN,
133 	.type		= FB_TYPE_PACKED_PIXELS,
134 	.visual		= FB_VISUAL_MONO10,
135 	.line_length	= 256,
136 };
137 
138 static int dnfb_blank(int blank, struct fb_info *info)
139 {
140 	if (blank)
141 		out_8(AP_CONTROL_3A, 0x0);
142 	else
143 		out_8(AP_CONTROL_3A, 0x1);
144 	return 0;
145 }
146 
147 static
148 void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
149 {
150 
151 	int incr, y_delta, pre_read = 0, x_end, x_word_count;
152 	uint start_mask, end_mask, dest;
153 	ushort *src, dummy;
154 	short i, j;
155 
156 	incr = (area->dy <= area->sy) ? 1 : -1;
157 
158 	src = (ushort *)(info->screen_base + area->sy * info->fix.line_length +
159 			(area->sx >> 4));
160 	dest = area->dy * (info->fix.line_length >> 1) + (area->dx >> 4);
161 
162 	if (incr > 0) {
163 		y_delta = (info->fix.line_length * 8) - area->sx - area->width;
164 		x_end = area->dx + area->width - 1;
165 		x_word_count = (x_end >> 4) - (area->dx >> 4) + 1;
166 		start_mask = 0xffff0000 >> (area->dx & 0xf);
167 		end_mask = 0x7ffff >> (x_end & 0xf);
168 		out_8(AP_CONTROL_0,
169 		     (((area->dx & 0xf) - (area->sx & 0xf)) % 16) | (0x4 << 5));
170 		if ((area->dx & 0xf) < (area->sx & 0xf))
171 			pre_read = 1;
172 	} else {
173 		y_delta = -((info->fix.line_length * 8) - area->sx - area->width);
174 		x_end = area->dx - area->width + 1;
175 		x_word_count = (area->dx >> 4) - (x_end >> 4) + 1;
176 		start_mask = 0x7ffff >> (area->dx & 0xf);
177 		end_mask = 0xffff0000 >> (x_end & 0xf);
178 		out_8(AP_CONTROL_0,
179 		     ((-((area->sx & 0xf) - (area->dx & 0xf))) % 16) |
180 		     (0x4 << 5));
181 		if ((area->dx & 0xf) > (area->sx & 0xf))
182 			pre_read = 1;
183 	}
184 
185 	for (i = 0; i < area->height; i++) {
186 
187 		out_8(AP_CONTROL_3A, 0xc | (dest >> 16));
188 
189 		if (pre_read) {
190 			dummy = *src;
191 			src += incr;
192 		}
193 
194 		if (x_word_count) {
195 			out_8(AP_WRITE_ENABLE, start_mask);
196 			*src = dest;
197 			src += incr;
198 			dest += incr;
199 			out_8(AP_WRITE_ENABLE, 0);
200 
201 			for (j = 1; j < (x_word_count - 1); j++) {
202 				*src = dest;
203 				src += incr;
204 				dest += incr;
205 			}
206 
207 			out_8(AP_WRITE_ENABLE, start_mask);
208 			*src = dest;
209 			dest += incr;
210 			src += incr;
211 		} else {
212 			out_8(AP_WRITE_ENABLE, start_mask | end_mask);
213 			*src = dest;
214 			dest += incr;
215 			src += incr;
216 		}
217 		src += (y_delta / 16);
218 		dest += (y_delta / 16);
219 	}
220 	out_8(AP_CONTROL_0, NORMAL_MODE);
221 }
222 
223 /*
224  * Initialization
225  */
226 
227 static int dnfb_probe(struct platform_device *dev)
228 {
229 	struct fb_info *info;
230 	int err = 0;
231 
232 	info = framebuffer_alloc(0, &dev->dev);
233 	if (!info)
234 		return -ENOMEM;
235 
236 	info->fbops = &dn_fb_ops;
237 	info->fix = dnfb_fix;
238 	info->var = dnfb_var;
239 	info->var.red.length = 1;
240 	info->var.red.offset = 0;
241 	info->var.green = info->var.blue = info->var.red;
242 	info->screen_base = (u_char *) info->fix.smem_start;
243 
244 	err = fb_alloc_cmap(&info->cmap, 2, 0);
245 	if (err < 0)
246 		goto release_framebuffer;
247 
248 	err = register_framebuffer(info);
249 	if (err < 0) {
250 		fb_dealloc_cmap(&info->cmap);
251 		goto release_framebuffer;
252 	}
253 	platform_set_drvdata(dev, info);
254 
255 	/* now we have registered we can safely setup the hardware */
256 	out_8(AP_CONTROL_3A, RESET_CREG);
257 	out_be16(AP_WRITE_ENABLE, 0x0);
258 	out_8(AP_CONTROL_0, NORMAL_MODE);
259 	out_8(AP_CONTROL_1, (AD_BLT | DST_EQ_SRC | NORM_CREG1));
260 	out_8(AP_CONTROL_2, S_DATA_PLN);
261 	out_be16(AP_ROP_1, SWAP(0x3));
262 
263 	printk("apollo frame buffer alive and kicking !\n");
264 	return err;
265 
266 release_framebuffer:
267 	framebuffer_release(info);
268 	return err;
269 }
270 
271 static struct platform_driver dnfb_driver = {
272 	.probe	= dnfb_probe,
273 	.driver	= {
274 		.name	= "dnfb",
275 	},
276 };
277 
278 static struct platform_device dnfb_device = {
279 	.name	= "dnfb",
280 };
281 
282 int __init dnfb_init(void)
283 {
284 	int ret;
285 
286 	if (!MACH_IS_APOLLO)
287 		return -ENODEV;
288 
289 	if (fb_get_options("dnfb", NULL))
290 		return -ENODEV;
291 
292 	ret = platform_driver_register(&dnfb_driver);
293 
294 	if (!ret) {
295 		ret = platform_device_register(&dnfb_device);
296 		if (ret)
297 			platform_driver_unregister(&dnfb_driver);
298 	}
299 	return ret;
300 }
301 
302 module_init(dnfb_init);
303 
304 MODULE_LICENSE("GPL");
305