1 /* 2 * Copyright (C) 2008-2009 MontaVista Software Inc. 3 * Copyright (C) 2008-2009 Texas Instruments Inc 4 * 5 * Based on the LCD driver for TI Avalanche processors written by 6 * Ajay Singh and Shalom Hai. 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option)any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 */ 22 #include <linux/module.h> 23 #include <linux/kernel.h> 24 #include <linux/fb.h> 25 #include <linux/dma-mapping.h> 26 #include <linux/device.h> 27 #include <linux/platform_device.h> 28 #include <linux/uaccess.h> 29 #include <linux/pm_runtime.h> 30 #include <linux/interrupt.h> 31 #include <linux/wait.h> 32 #include <linux/clk.h> 33 #include <linux/cpufreq.h> 34 #include <linux/console.h> 35 #include <linux/spinlock.h> 36 #include <linux/slab.h> 37 #include <linux/delay.h> 38 #include <linux/lcm.h> 39 #include <video/da8xx-fb.h> 40 #include <asm/div64.h> 41 42 #define DRIVER_NAME "da8xx_lcdc" 43 44 #define LCD_VERSION_1 1 45 #define LCD_VERSION_2 2 46 47 /* LCD Status Register */ 48 #define LCD_END_OF_FRAME1 BIT(9) 49 #define LCD_END_OF_FRAME0 BIT(8) 50 #define LCD_PL_LOAD_DONE BIT(6) 51 #define LCD_FIFO_UNDERFLOW BIT(5) 52 #define LCD_SYNC_LOST BIT(2) 53 #define LCD_FRAME_DONE BIT(0) 54 55 /* LCD DMA Control Register */ 56 #define LCD_DMA_BURST_SIZE(x) ((x) << 4) 57 #define LCD_DMA_BURST_1 0x0 58 #define LCD_DMA_BURST_2 0x1 59 #define LCD_DMA_BURST_4 0x2 60 #define LCD_DMA_BURST_8 0x3 61 #define LCD_DMA_BURST_16 0x4 62 #define LCD_V1_END_OF_FRAME_INT_ENA BIT(2) 63 #define LCD_V2_END_OF_FRAME0_INT_ENA BIT(8) 64 #define LCD_V2_END_OF_FRAME1_INT_ENA BIT(9) 65 #define LCD_DUAL_FRAME_BUFFER_ENABLE BIT(0) 66 67 /* LCD Control Register */ 68 #define LCD_CLK_DIVISOR(x) ((x) << 8) 69 #define LCD_RASTER_MODE 0x01 70 71 /* LCD Raster Control Register */ 72 #define LCD_PALETTE_LOAD_MODE(x) ((x) << 20) 73 #define PALETTE_AND_DATA 0x00 74 #define PALETTE_ONLY 0x01 75 #define DATA_ONLY 0x02 76 77 #define LCD_MONO_8BIT_MODE BIT(9) 78 #define LCD_RASTER_ORDER BIT(8) 79 #define LCD_TFT_MODE BIT(7) 80 #define LCD_V1_UNDERFLOW_INT_ENA BIT(6) 81 #define LCD_V2_UNDERFLOW_INT_ENA BIT(5) 82 #define LCD_V1_PL_INT_ENA BIT(4) 83 #define LCD_V2_PL_INT_ENA BIT(6) 84 #define LCD_MONOCHROME_MODE BIT(1) 85 #define LCD_RASTER_ENABLE BIT(0) 86 #define LCD_TFT_ALT_ENABLE BIT(23) 87 #define LCD_STN_565_ENABLE BIT(24) 88 #define LCD_V2_DMA_CLK_EN BIT(2) 89 #define LCD_V2_LIDD_CLK_EN BIT(1) 90 #define LCD_V2_CORE_CLK_EN BIT(0) 91 #define LCD_V2_LPP_B10 26 92 #define LCD_V2_TFT_24BPP_MODE BIT(25) 93 #define LCD_V2_TFT_24BPP_UNPACK BIT(26) 94 95 /* LCD Raster Timing 2 Register */ 96 #define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16) 97 #define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8) 98 #define LCD_SYNC_CTRL BIT(25) 99 #define LCD_SYNC_EDGE BIT(24) 100 #define LCD_INVERT_PIXEL_CLOCK BIT(22) 101 #define LCD_INVERT_LINE_CLOCK BIT(21) 102 #define LCD_INVERT_FRAME_CLOCK BIT(20) 103 104 /* LCD Block */ 105 #define LCD_PID_REG 0x0 106 #define LCD_CTRL_REG 0x4 107 #define LCD_STAT_REG 0x8 108 #define LCD_RASTER_CTRL_REG 0x28 109 #define LCD_RASTER_TIMING_0_REG 0x2C 110 #define LCD_RASTER_TIMING_1_REG 0x30 111 #define LCD_RASTER_TIMING_2_REG 0x34 112 #define LCD_DMA_CTRL_REG 0x40 113 #define LCD_DMA_FRM_BUF_BASE_ADDR_0_REG 0x44 114 #define LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG 0x48 115 #define LCD_DMA_FRM_BUF_BASE_ADDR_1_REG 0x4C 116 #define LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG 0x50 117 118 /* Interrupt Registers available only in Version 2 */ 119 #define LCD_RAW_STAT_REG 0x58 120 #define LCD_MASKED_STAT_REG 0x5c 121 #define LCD_INT_ENABLE_SET_REG 0x60 122 #define LCD_INT_ENABLE_CLR_REG 0x64 123 #define LCD_END_OF_INT_IND_REG 0x68 124 125 /* Clock registers available only on Version 2 */ 126 #define LCD_CLK_ENABLE_REG 0x6c 127 #define LCD_CLK_RESET_REG 0x70 128 #define LCD_CLK_MAIN_RESET BIT(3) 129 130 #define LCD_NUM_BUFFERS 2 131 132 #define PALETTE_SIZE 256 133 134 #define CLK_MIN_DIV 2 135 #define CLK_MAX_DIV 255 136 137 static void __iomem *da8xx_fb_reg_base; 138 static unsigned int lcd_revision; 139 static irq_handler_t lcdc_irq_handler; 140 static wait_queue_head_t frame_done_wq; 141 static int frame_done_flag; 142 143 static unsigned int lcdc_read(unsigned int addr) 144 { 145 return (unsigned int)__raw_readl(da8xx_fb_reg_base + (addr)); 146 } 147 148 static void lcdc_write(unsigned int val, unsigned int addr) 149 { 150 __raw_writel(val, da8xx_fb_reg_base + (addr)); 151 } 152 153 struct da8xx_fb_par { 154 struct device *dev; 155 dma_addr_t p_palette_base; 156 unsigned char *v_palette_base; 157 dma_addr_t vram_phys; 158 unsigned long vram_size; 159 void *vram_virt; 160 unsigned int dma_start; 161 unsigned int dma_end; 162 struct clk *lcdc_clk; 163 int irq; 164 unsigned int palette_sz; 165 int blank; 166 wait_queue_head_t vsync_wait; 167 int vsync_flag; 168 int vsync_timeout; 169 spinlock_t lock_for_chan_update; 170 171 /* 172 * LCDC has 2 ping pong DMA channels, channel 0 173 * and channel 1. 174 */ 175 unsigned int which_dma_channel_done; 176 #ifdef CONFIG_CPU_FREQ 177 struct notifier_block freq_transition; 178 #endif 179 unsigned int lcdc_clk_rate; 180 void (*panel_power_ctrl)(int); 181 u32 pseudo_palette[16]; 182 struct fb_videomode mode; 183 struct lcd_ctrl_config cfg; 184 }; 185 186 static struct fb_var_screeninfo da8xx_fb_var; 187 188 static struct fb_fix_screeninfo da8xx_fb_fix = { 189 .id = "DA8xx FB Drv", 190 .type = FB_TYPE_PACKED_PIXELS, 191 .type_aux = 0, 192 .visual = FB_VISUAL_PSEUDOCOLOR, 193 .xpanstep = 0, 194 .ypanstep = 1, 195 .ywrapstep = 0, 196 .accel = FB_ACCEL_NONE 197 }; 198 199 static struct fb_videomode known_lcd_panels[] = { 200 /* Sharp LCD035Q3DG01 */ 201 [0] = { 202 .name = "Sharp_LCD035Q3DG01", 203 .xres = 320, 204 .yres = 240, 205 .pixclock = KHZ2PICOS(4607), 206 .left_margin = 6, 207 .right_margin = 8, 208 .upper_margin = 2, 209 .lower_margin = 2, 210 .hsync_len = 0, 211 .vsync_len = 0, 212 .sync = FB_SYNC_CLK_INVERT, 213 }, 214 /* Sharp LK043T1DG01 */ 215 [1] = { 216 .name = "Sharp_LK043T1DG01", 217 .xres = 480, 218 .yres = 272, 219 .pixclock = KHZ2PICOS(7833), 220 .left_margin = 2, 221 .right_margin = 2, 222 .upper_margin = 2, 223 .lower_margin = 2, 224 .hsync_len = 41, 225 .vsync_len = 10, 226 .sync = 0, 227 .flag = 0, 228 }, 229 [2] = { 230 /* Hitachi SP10Q010 */ 231 .name = "SP10Q010", 232 .xres = 320, 233 .yres = 240, 234 .pixclock = KHZ2PICOS(7833), 235 .left_margin = 10, 236 .right_margin = 10, 237 .upper_margin = 10, 238 .lower_margin = 10, 239 .hsync_len = 10, 240 .vsync_len = 10, 241 .sync = 0, 242 .flag = 0, 243 }, 244 [3] = { 245 /* Densitron 84-0023-001T */ 246 .name = "Densitron_84-0023-001T", 247 .xres = 320, 248 .yres = 240, 249 .pixclock = KHZ2PICOS(6400), 250 .left_margin = 0, 251 .right_margin = 0, 252 .upper_margin = 0, 253 .lower_margin = 0, 254 .hsync_len = 30, 255 .vsync_len = 3, 256 .sync = 0, 257 }, 258 }; 259 260 static bool da8xx_fb_is_raster_enabled(void) 261 { 262 return !!(lcdc_read(LCD_RASTER_CTRL_REG) & LCD_RASTER_ENABLE); 263 } 264 265 /* Enable the Raster Engine of the LCD Controller */ 266 static void lcd_enable_raster(void) 267 { 268 u32 reg; 269 270 /* Put LCDC in reset for several cycles */ 271 if (lcd_revision == LCD_VERSION_2) 272 /* Write 1 to reset LCDC */ 273 lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG); 274 mdelay(1); 275 276 /* Bring LCDC out of reset */ 277 if (lcd_revision == LCD_VERSION_2) 278 lcdc_write(0, LCD_CLK_RESET_REG); 279 mdelay(1); 280 281 /* Above reset sequence doesnot reset register context */ 282 reg = lcdc_read(LCD_RASTER_CTRL_REG); 283 if (!(reg & LCD_RASTER_ENABLE)) 284 lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); 285 } 286 287 /* Disable the Raster Engine of the LCD Controller */ 288 static void lcd_disable_raster(enum da8xx_frame_complete wait_for_frame_done) 289 { 290 u32 reg; 291 int ret; 292 293 reg = lcdc_read(LCD_RASTER_CTRL_REG); 294 if (reg & LCD_RASTER_ENABLE) 295 lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); 296 else 297 /* return if already disabled */ 298 return; 299 300 if ((wait_for_frame_done == DA8XX_FRAME_WAIT) && 301 (lcd_revision == LCD_VERSION_2)) { 302 frame_done_flag = 0; 303 ret = wait_event_interruptible_timeout(frame_done_wq, 304 frame_done_flag != 0, 305 msecs_to_jiffies(50)); 306 if (ret == 0) 307 pr_err("LCD Controller timed out\n"); 308 } 309 } 310 311 static void lcd_blit(int load_mode, struct da8xx_fb_par *par) 312 { 313 u32 start; 314 u32 end; 315 u32 reg_ras; 316 u32 reg_dma; 317 u32 reg_int; 318 319 /* init reg to clear PLM (loading mode) fields */ 320 reg_ras = lcdc_read(LCD_RASTER_CTRL_REG); 321 reg_ras &= ~(3 << 20); 322 323 reg_dma = lcdc_read(LCD_DMA_CTRL_REG); 324 325 if (load_mode == LOAD_DATA) { 326 start = par->dma_start; 327 end = par->dma_end; 328 329 reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); 330 if (lcd_revision == LCD_VERSION_1) { 331 reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA; 332 } else { 333 reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) | 334 LCD_V2_END_OF_FRAME0_INT_ENA | 335 LCD_V2_END_OF_FRAME1_INT_ENA | 336 LCD_FRAME_DONE | LCD_SYNC_LOST; 337 lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG); 338 } 339 reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; 340 341 lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); 342 lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); 343 lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); 344 lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); 345 } else if (load_mode == LOAD_PALETTE) { 346 start = par->p_palette_base; 347 end = start + par->palette_sz - 1; 348 349 reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); 350 351 if (lcd_revision == LCD_VERSION_1) { 352 reg_ras |= LCD_V1_PL_INT_ENA; 353 } else { 354 reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) | 355 LCD_V2_PL_INT_ENA; 356 lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG); 357 } 358 359 lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); 360 lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); 361 } 362 363 lcdc_write(reg_dma, LCD_DMA_CTRL_REG); 364 lcdc_write(reg_ras, LCD_RASTER_CTRL_REG); 365 366 /* 367 * The Raster enable bit must be set after all other control fields are 368 * set. 369 */ 370 lcd_enable_raster(); 371 } 372 373 /* Configure the Burst Size and fifo threhold of DMA */ 374 static int lcd_cfg_dma(int burst_size, int fifo_th) 375 { 376 u32 reg; 377 378 reg = lcdc_read(LCD_DMA_CTRL_REG) & 0x00000001; 379 switch (burst_size) { 380 case 1: 381 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1); 382 break; 383 case 2: 384 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2); 385 break; 386 case 4: 387 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4); 388 break; 389 case 8: 390 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8); 391 break; 392 case 16: 393 default: 394 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16); 395 break; 396 } 397 398 reg |= (fifo_th << 8); 399 400 lcdc_write(reg, LCD_DMA_CTRL_REG); 401 402 return 0; 403 } 404 405 static void lcd_cfg_ac_bias(int period, int transitions_per_int) 406 { 407 u32 reg; 408 409 /* Set the AC Bias Period and Number of Transisitons per Interrupt */ 410 reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & 0xFFF00000; 411 reg |= LCD_AC_BIAS_FREQUENCY(period) | 412 LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int); 413 lcdc_write(reg, LCD_RASTER_TIMING_2_REG); 414 } 415 416 static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width, 417 int front_porch) 418 { 419 u32 reg; 420 421 reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0x3ff; 422 reg |= (((back_porch-1) & 0xff) << 24) 423 | (((front_porch-1) & 0xff) << 16) 424 | (((pulse_width-1) & 0x3f) << 10); 425 lcdc_write(reg, LCD_RASTER_TIMING_0_REG); 426 427 /* 428 * LCDC Version 2 adds some extra bits that increase the allowable 429 * size of the horizontal timing registers. 430 * remember that the registers use 0 to represent 1 so all values 431 * that get set into register need to be decremented by 1 432 */ 433 if (lcd_revision == LCD_VERSION_2) { 434 /* Mask off the bits we want to change */ 435 reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & ~0x780000ff; 436 reg |= ((front_porch-1) & 0x300) >> 8; 437 reg |= ((back_porch-1) & 0x300) >> 4; 438 reg |= ((pulse_width-1) & 0x3c0) << 21; 439 lcdc_write(reg, LCD_RASTER_TIMING_2_REG); 440 } 441 } 442 443 static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, 444 int front_porch) 445 { 446 u32 reg; 447 448 reg = lcdc_read(LCD_RASTER_TIMING_1_REG) & 0x3ff; 449 reg |= ((back_porch & 0xff) << 24) 450 | ((front_porch & 0xff) << 16) 451 | (((pulse_width-1) & 0x3f) << 10); 452 lcdc_write(reg, LCD_RASTER_TIMING_1_REG); 453 } 454 455 static int lcd_cfg_display(const struct lcd_ctrl_config *cfg, 456 struct fb_videomode *panel) 457 { 458 u32 reg; 459 u32 reg_int; 460 461 reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(LCD_TFT_MODE | 462 LCD_MONO_8BIT_MODE | 463 LCD_MONOCHROME_MODE); 464 465 switch (cfg->panel_shade) { 466 case MONOCHROME: 467 reg |= LCD_MONOCHROME_MODE; 468 if (cfg->mono_8bit_mode) 469 reg |= LCD_MONO_8BIT_MODE; 470 break; 471 case COLOR_ACTIVE: 472 reg |= LCD_TFT_MODE; 473 if (cfg->tft_alt_mode) 474 reg |= LCD_TFT_ALT_ENABLE; 475 break; 476 477 case COLOR_PASSIVE: 478 /* AC bias applicable only for Pasive panels */ 479 lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt); 480 if (cfg->bpp == 12 && cfg->stn_565_mode) 481 reg |= LCD_STN_565_ENABLE; 482 break; 483 484 default: 485 return -EINVAL; 486 } 487 488 /* enable additional interrupts here */ 489 if (lcd_revision == LCD_VERSION_1) { 490 reg |= LCD_V1_UNDERFLOW_INT_ENA; 491 } else { 492 reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) | 493 LCD_V2_UNDERFLOW_INT_ENA; 494 lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG); 495 } 496 497 lcdc_write(reg, LCD_RASTER_CTRL_REG); 498 499 reg = lcdc_read(LCD_RASTER_TIMING_2_REG); 500 501 reg |= LCD_SYNC_CTRL; 502 503 if (cfg->sync_edge) 504 reg |= LCD_SYNC_EDGE; 505 else 506 reg &= ~LCD_SYNC_EDGE; 507 508 if ((panel->sync & FB_SYNC_HOR_HIGH_ACT) == 0) 509 reg |= LCD_INVERT_LINE_CLOCK; 510 else 511 reg &= ~LCD_INVERT_LINE_CLOCK; 512 513 if ((panel->sync & FB_SYNC_VERT_HIGH_ACT) == 0) 514 reg |= LCD_INVERT_FRAME_CLOCK; 515 else 516 reg &= ~LCD_INVERT_FRAME_CLOCK; 517 518 lcdc_write(reg, LCD_RASTER_TIMING_2_REG); 519 520 return 0; 521 } 522 523 static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, 524 u32 bpp, u32 raster_order) 525 { 526 u32 reg; 527 528 if (bpp > 16 && lcd_revision == LCD_VERSION_1) 529 return -EINVAL; 530 531 /* Set the Panel Width */ 532 /* Pixels per line = (PPL + 1)*16 */ 533 if (lcd_revision == LCD_VERSION_1) { 534 /* 535 * 0x3F in bits 4..9 gives max horizontal resolution = 1024 536 * pixels. 537 */ 538 width &= 0x3f0; 539 } else { 540 /* 541 * 0x7F in bits 4..10 gives max horizontal resolution = 2048 542 * pixels. 543 */ 544 width &= 0x7f0; 545 } 546 547 reg = lcdc_read(LCD_RASTER_TIMING_0_REG); 548 reg &= 0xfffffc00; 549 if (lcd_revision == LCD_VERSION_1) { 550 reg |= ((width >> 4) - 1) << 4; 551 } else { 552 width = (width >> 4) - 1; 553 reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3); 554 } 555 lcdc_write(reg, LCD_RASTER_TIMING_0_REG); 556 557 /* Set the Panel Height */ 558 /* Set bits 9:0 of Lines Per Pixel */ 559 reg = lcdc_read(LCD_RASTER_TIMING_1_REG); 560 reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00); 561 lcdc_write(reg, LCD_RASTER_TIMING_1_REG); 562 563 /* Set bit 10 of Lines Per Pixel */ 564 if (lcd_revision == LCD_VERSION_2) { 565 reg = lcdc_read(LCD_RASTER_TIMING_2_REG); 566 reg |= ((height - 1) & 0x400) << 16; 567 lcdc_write(reg, LCD_RASTER_TIMING_2_REG); 568 } 569 570 /* Set the Raster Order of the Frame Buffer */ 571 reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(1 << 8); 572 if (raster_order) 573 reg |= LCD_RASTER_ORDER; 574 575 par->palette_sz = 16 * 2; 576 577 switch (bpp) { 578 case 1: 579 case 2: 580 case 4: 581 case 16: 582 break; 583 case 24: 584 reg |= LCD_V2_TFT_24BPP_MODE; 585 break; 586 case 32: 587 reg |= LCD_V2_TFT_24BPP_MODE; 588 reg |= LCD_V2_TFT_24BPP_UNPACK; 589 break; 590 case 8: 591 par->palette_sz = 256 * 2; 592 break; 593 594 default: 595 return -EINVAL; 596 } 597 598 lcdc_write(reg, LCD_RASTER_CTRL_REG); 599 600 return 0; 601 } 602 603 #define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16) 604 static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, 605 unsigned blue, unsigned transp, 606 struct fb_info *info) 607 { 608 struct da8xx_fb_par *par = info->par; 609 unsigned short *palette = (unsigned short *) par->v_palette_base; 610 u_short pal; 611 int update_hw = 0; 612 613 if (regno > 255) 614 return 1; 615 616 if (info->fix.visual == FB_VISUAL_DIRECTCOLOR) 617 return 1; 618 619 if (info->var.bits_per_pixel > 16 && lcd_revision == LCD_VERSION_1) 620 return -EINVAL; 621 622 switch (info->fix.visual) { 623 case FB_VISUAL_TRUECOLOR: 624 red = CNVT_TOHW(red, info->var.red.length); 625 green = CNVT_TOHW(green, info->var.green.length); 626 blue = CNVT_TOHW(blue, info->var.blue.length); 627 break; 628 case FB_VISUAL_PSEUDOCOLOR: 629 switch (info->var.bits_per_pixel) { 630 case 4: 631 if (regno > 15) 632 return -EINVAL; 633 634 if (info->var.grayscale) { 635 pal = regno; 636 } else { 637 red >>= 4; 638 green >>= 8; 639 blue >>= 12; 640 641 pal = red & 0x0f00; 642 pal |= green & 0x00f0; 643 pal |= blue & 0x000f; 644 } 645 if (regno == 0) 646 pal |= 0x2000; 647 palette[regno] = pal; 648 break; 649 650 case 8: 651 red >>= 4; 652 green >>= 8; 653 blue >>= 12; 654 655 pal = (red & 0x0f00); 656 pal |= (green & 0x00f0); 657 pal |= (blue & 0x000f); 658 659 if (palette[regno] != pal) { 660 update_hw = 1; 661 palette[regno] = pal; 662 } 663 break; 664 } 665 break; 666 } 667 668 /* Truecolor has hardware independent palette */ 669 if (info->fix.visual == FB_VISUAL_TRUECOLOR) { 670 u32 v; 671 672 if (regno > 15) 673 return -EINVAL; 674 675 v = (red << info->var.red.offset) | 676 (green << info->var.green.offset) | 677 (blue << info->var.blue.offset); 678 679 ((u32 *) (info->pseudo_palette))[regno] = v; 680 if (palette[0] != 0x4000) { 681 update_hw = 1; 682 palette[0] = 0x4000; 683 } 684 } 685 686 /* Update the palette in the h/w as needed. */ 687 if (update_hw) 688 lcd_blit(LOAD_PALETTE, par); 689 690 return 0; 691 } 692 #undef CNVT_TOHW 693 694 static void da8xx_fb_lcd_reset(void) 695 { 696 /* DMA has to be disabled */ 697 lcdc_write(0, LCD_DMA_CTRL_REG); 698 lcdc_write(0, LCD_RASTER_CTRL_REG); 699 700 if (lcd_revision == LCD_VERSION_2) { 701 lcdc_write(0, LCD_INT_ENABLE_SET_REG); 702 /* Write 1 to reset */ 703 lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG); 704 lcdc_write(0, LCD_CLK_RESET_REG); 705 } 706 } 707 708 static int da8xx_fb_config_clk_divider(struct da8xx_fb_par *par, 709 unsigned lcdc_clk_div, 710 unsigned lcdc_clk_rate) 711 { 712 int ret; 713 714 if (par->lcdc_clk_rate != lcdc_clk_rate) { 715 ret = clk_set_rate(par->lcdc_clk, lcdc_clk_rate); 716 if (ret) { 717 dev_err(par->dev, 718 "unable to set clock rate at %u\n", 719 lcdc_clk_rate); 720 return ret; 721 } 722 par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk); 723 } 724 725 /* Configure the LCD clock divisor. */ 726 lcdc_write(LCD_CLK_DIVISOR(lcdc_clk_div) | 727 (LCD_RASTER_MODE & 0x1), LCD_CTRL_REG); 728 729 if (lcd_revision == LCD_VERSION_2) 730 lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN | 731 LCD_V2_CORE_CLK_EN, LCD_CLK_ENABLE_REG); 732 733 return 0; 734 } 735 736 static unsigned int da8xx_fb_calc_clk_divider(struct da8xx_fb_par *par, 737 unsigned pixclock, 738 unsigned *lcdc_clk_rate) 739 { 740 unsigned lcdc_clk_div; 741 742 pixclock = PICOS2KHZ(pixclock) * 1000; 743 744 *lcdc_clk_rate = par->lcdc_clk_rate; 745 746 if (pixclock < (*lcdc_clk_rate / CLK_MAX_DIV)) { 747 *lcdc_clk_rate = clk_round_rate(par->lcdc_clk, 748 pixclock * CLK_MAX_DIV); 749 lcdc_clk_div = CLK_MAX_DIV; 750 } else if (pixclock > (*lcdc_clk_rate / CLK_MIN_DIV)) { 751 *lcdc_clk_rate = clk_round_rate(par->lcdc_clk, 752 pixclock * CLK_MIN_DIV); 753 lcdc_clk_div = CLK_MIN_DIV; 754 } else { 755 lcdc_clk_div = *lcdc_clk_rate / pixclock; 756 } 757 758 return lcdc_clk_div; 759 } 760 761 static int da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par, 762 struct fb_videomode *mode) 763 { 764 unsigned lcdc_clk_rate; 765 unsigned lcdc_clk_div = da8xx_fb_calc_clk_divider(par, mode->pixclock, 766 &lcdc_clk_rate); 767 768 return da8xx_fb_config_clk_divider(par, lcdc_clk_div, lcdc_clk_rate); 769 } 770 771 static unsigned da8xx_fb_round_clk(struct da8xx_fb_par *par, 772 unsigned pixclock) 773 { 774 unsigned lcdc_clk_div, lcdc_clk_rate; 775 776 lcdc_clk_div = da8xx_fb_calc_clk_divider(par, pixclock, &lcdc_clk_rate); 777 return KHZ2PICOS(lcdc_clk_rate / (1000 * lcdc_clk_div)); 778 } 779 780 static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, 781 struct fb_videomode *panel) 782 { 783 u32 bpp; 784 int ret = 0; 785 786 ret = da8xx_fb_calc_config_clk_divider(par, panel); 787 if (ret) { 788 dev_err(par->dev, "unable to configure clock\n"); 789 return ret; 790 } 791 792 if (panel->sync & FB_SYNC_CLK_INVERT) 793 lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) | 794 LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG); 795 else 796 lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) & 797 ~LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG); 798 799 /* Configure the DMA burst size and fifo threshold. */ 800 ret = lcd_cfg_dma(cfg->dma_burst_sz, cfg->fifo_th); 801 if (ret < 0) 802 return ret; 803 804 /* Configure the vertical and horizontal sync properties. */ 805 lcd_cfg_vertical_sync(panel->upper_margin, panel->vsync_len, 806 panel->lower_margin); 807 lcd_cfg_horizontal_sync(panel->left_margin, panel->hsync_len, 808 panel->right_margin); 809 810 /* Configure for disply */ 811 ret = lcd_cfg_display(cfg, panel); 812 if (ret < 0) 813 return ret; 814 815 bpp = cfg->bpp; 816 817 if (bpp == 12) 818 bpp = 16; 819 ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->xres, 820 (unsigned int)panel->yres, bpp, 821 cfg->raster_order); 822 if (ret < 0) 823 return ret; 824 825 /* Configure FDD */ 826 lcdc_write((lcdc_read(LCD_RASTER_CTRL_REG) & 0xfff00fff) | 827 (cfg->fdd << 12), LCD_RASTER_CTRL_REG); 828 829 return 0; 830 } 831 832 /* IRQ handler for version 2 of LCDC */ 833 static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg) 834 { 835 struct da8xx_fb_par *par = arg; 836 u32 stat = lcdc_read(LCD_MASKED_STAT_REG); 837 838 if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { 839 lcd_disable_raster(DA8XX_FRAME_NOWAIT); 840 lcdc_write(stat, LCD_MASKED_STAT_REG); 841 lcd_enable_raster(); 842 } else if (stat & LCD_PL_LOAD_DONE) { 843 /* 844 * Must disable raster before changing state of any control bit. 845 * And also must be disabled before clearing the PL loading 846 * interrupt via the following write to the status register. If 847 * this is done after then one gets multiple PL done interrupts. 848 */ 849 lcd_disable_raster(DA8XX_FRAME_NOWAIT); 850 851 lcdc_write(stat, LCD_MASKED_STAT_REG); 852 853 /* Disable PL completion interrupt */ 854 lcdc_write(LCD_V2_PL_INT_ENA, LCD_INT_ENABLE_CLR_REG); 855 856 /* Setup and start data loading mode */ 857 lcd_blit(LOAD_DATA, par); 858 } else { 859 lcdc_write(stat, LCD_MASKED_STAT_REG); 860 861 if (stat & LCD_END_OF_FRAME0) { 862 par->which_dma_channel_done = 0; 863 lcdc_write(par->dma_start, 864 LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); 865 lcdc_write(par->dma_end, 866 LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); 867 par->vsync_flag = 1; 868 wake_up_interruptible(&par->vsync_wait); 869 } 870 871 if (stat & LCD_END_OF_FRAME1) { 872 par->which_dma_channel_done = 1; 873 lcdc_write(par->dma_start, 874 LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); 875 lcdc_write(par->dma_end, 876 LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); 877 par->vsync_flag = 1; 878 wake_up_interruptible(&par->vsync_wait); 879 } 880 881 /* Set only when controller is disabled and at the end of 882 * active frame 883 */ 884 if (stat & BIT(0)) { 885 frame_done_flag = 1; 886 wake_up_interruptible(&frame_done_wq); 887 } 888 } 889 890 lcdc_write(0, LCD_END_OF_INT_IND_REG); 891 return IRQ_HANDLED; 892 } 893 894 /* IRQ handler for version 1 LCDC */ 895 static irqreturn_t lcdc_irq_handler_rev01(int irq, void *arg) 896 { 897 struct da8xx_fb_par *par = arg; 898 u32 stat = lcdc_read(LCD_STAT_REG); 899 u32 reg_ras; 900 901 if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { 902 lcd_disable_raster(DA8XX_FRAME_NOWAIT); 903 lcdc_write(stat, LCD_STAT_REG); 904 lcd_enable_raster(); 905 } else if (stat & LCD_PL_LOAD_DONE) { 906 /* 907 * Must disable raster before changing state of any control bit. 908 * And also must be disabled before clearing the PL loading 909 * interrupt via the following write to the status register. If 910 * this is done after then one gets multiple PL done interrupts. 911 */ 912 lcd_disable_raster(DA8XX_FRAME_NOWAIT); 913 914 lcdc_write(stat, LCD_STAT_REG); 915 916 /* Disable PL completion inerrupt */ 917 reg_ras = lcdc_read(LCD_RASTER_CTRL_REG); 918 reg_ras &= ~LCD_V1_PL_INT_ENA; 919 lcdc_write(reg_ras, LCD_RASTER_CTRL_REG); 920 921 /* Setup and start data loading mode */ 922 lcd_blit(LOAD_DATA, par); 923 } else { 924 lcdc_write(stat, LCD_STAT_REG); 925 926 if (stat & LCD_END_OF_FRAME0) { 927 par->which_dma_channel_done = 0; 928 lcdc_write(par->dma_start, 929 LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); 930 lcdc_write(par->dma_end, 931 LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); 932 par->vsync_flag = 1; 933 wake_up_interruptible(&par->vsync_wait); 934 } 935 936 if (stat & LCD_END_OF_FRAME1) { 937 par->which_dma_channel_done = 1; 938 lcdc_write(par->dma_start, 939 LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); 940 lcdc_write(par->dma_end, 941 LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); 942 par->vsync_flag = 1; 943 wake_up_interruptible(&par->vsync_wait); 944 } 945 } 946 947 return IRQ_HANDLED; 948 } 949 950 static int fb_check_var(struct fb_var_screeninfo *var, 951 struct fb_info *info) 952 { 953 int err = 0; 954 struct da8xx_fb_par *par = info->par; 955 int bpp = var->bits_per_pixel >> 3; 956 unsigned long line_size = var->xres_virtual * bpp; 957 958 if (var->bits_per_pixel > 16 && lcd_revision == LCD_VERSION_1) 959 return -EINVAL; 960 961 switch (var->bits_per_pixel) { 962 case 1: 963 case 8: 964 var->red.offset = 0; 965 var->red.length = 8; 966 var->green.offset = 0; 967 var->green.length = 8; 968 var->blue.offset = 0; 969 var->blue.length = 8; 970 var->transp.offset = 0; 971 var->transp.length = 0; 972 var->nonstd = 0; 973 break; 974 case 4: 975 var->red.offset = 0; 976 var->red.length = 4; 977 var->green.offset = 0; 978 var->green.length = 4; 979 var->blue.offset = 0; 980 var->blue.length = 4; 981 var->transp.offset = 0; 982 var->transp.length = 0; 983 var->nonstd = FB_NONSTD_REV_PIX_IN_B; 984 break; 985 case 16: /* RGB 565 */ 986 var->red.offset = 11; 987 var->red.length = 5; 988 var->green.offset = 5; 989 var->green.length = 6; 990 var->blue.offset = 0; 991 var->blue.length = 5; 992 var->transp.offset = 0; 993 var->transp.length = 0; 994 var->nonstd = 0; 995 break; 996 case 24: 997 var->red.offset = 16; 998 var->red.length = 8; 999 var->green.offset = 8; 1000 var->green.length = 8; 1001 var->blue.offset = 0; 1002 var->blue.length = 8; 1003 var->nonstd = 0; 1004 break; 1005 case 32: 1006 var->transp.offset = 24; 1007 var->transp.length = 8; 1008 var->red.offset = 16; 1009 var->red.length = 8; 1010 var->green.offset = 8; 1011 var->green.length = 8; 1012 var->blue.offset = 0; 1013 var->blue.length = 8; 1014 var->nonstd = 0; 1015 break; 1016 default: 1017 err = -EINVAL; 1018 } 1019 1020 var->red.msb_right = 0; 1021 var->green.msb_right = 0; 1022 var->blue.msb_right = 0; 1023 var->transp.msb_right = 0; 1024 1025 if (line_size * var->yres_virtual > par->vram_size) 1026 var->yres_virtual = par->vram_size / line_size; 1027 1028 if (var->yres > var->yres_virtual) 1029 var->yres = var->yres_virtual; 1030 1031 if (var->xres > var->xres_virtual) 1032 var->xres = var->xres_virtual; 1033 1034 if (var->xres + var->xoffset > var->xres_virtual) 1035 var->xoffset = var->xres_virtual - var->xres; 1036 if (var->yres + var->yoffset > var->yres_virtual) 1037 var->yoffset = var->yres_virtual - var->yres; 1038 1039 var->pixclock = da8xx_fb_round_clk(par, var->pixclock); 1040 1041 return err; 1042 } 1043 1044 #ifdef CONFIG_CPU_FREQ 1045 static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb, 1046 unsigned long val, void *data) 1047 { 1048 struct da8xx_fb_par *par; 1049 1050 par = container_of(nb, struct da8xx_fb_par, freq_transition); 1051 if (val == CPUFREQ_POSTCHANGE) { 1052 if (par->lcdc_clk_rate != clk_get_rate(par->lcdc_clk)) { 1053 par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk); 1054 lcd_disable_raster(DA8XX_FRAME_WAIT); 1055 da8xx_fb_calc_config_clk_divider(par, &par->mode); 1056 if (par->blank == FB_BLANK_UNBLANK) 1057 lcd_enable_raster(); 1058 } 1059 } 1060 1061 return 0; 1062 } 1063 1064 static int lcd_da8xx_cpufreq_register(struct da8xx_fb_par *par) 1065 { 1066 par->freq_transition.notifier_call = lcd_da8xx_cpufreq_transition; 1067 1068 return cpufreq_register_notifier(&par->freq_transition, 1069 CPUFREQ_TRANSITION_NOTIFIER); 1070 } 1071 1072 static void lcd_da8xx_cpufreq_deregister(struct da8xx_fb_par *par) 1073 { 1074 cpufreq_unregister_notifier(&par->freq_transition, 1075 CPUFREQ_TRANSITION_NOTIFIER); 1076 } 1077 #endif 1078 1079 static int fb_remove(struct platform_device *dev) 1080 { 1081 struct fb_info *info = dev_get_drvdata(&dev->dev); 1082 1083 if (info) { 1084 struct da8xx_fb_par *par = info->par; 1085 1086 #ifdef CONFIG_CPU_FREQ 1087 lcd_da8xx_cpufreq_deregister(par); 1088 #endif 1089 if (par->panel_power_ctrl) 1090 par->panel_power_ctrl(0); 1091 1092 lcd_disable_raster(DA8XX_FRAME_WAIT); 1093 lcdc_write(0, LCD_RASTER_CTRL_REG); 1094 1095 /* disable DMA */ 1096 lcdc_write(0, LCD_DMA_CTRL_REG); 1097 1098 unregister_framebuffer(info); 1099 fb_dealloc_cmap(&info->cmap); 1100 dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base, 1101 par->p_palette_base); 1102 dma_free_coherent(NULL, par->vram_size, par->vram_virt, 1103 par->vram_phys); 1104 pm_runtime_put_sync(&dev->dev); 1105 pm_runtime_disable(&dev->dev); 1106 framebuffer_release(info); 1107 1108 } 1109 return 0; 1110 } 1111 1112 /* 1113 * Function to wait for vertical sync which for this LCD peripheral 1114 * translates into waiting for the current raster frame to complete. 1115 */ 1116 static int fb_wait_for_vsync(struct fb_info *info) 1117 { 1118 struct da8xx_fb_par *par = info->par; 1119 int ret; 1120 1121 /* 1122 * Set flag to 0 and wait for isr to set to 1. It would seem there is a 1123 * race condition here where the ISR could have occurred just before or 1124 * just after this set. But since we are just coarsely waiting for 1125 * a frame to complete then that's OK. i.e. if the frame completed 1126 * just before this code executed then we have to wait another full 1127 * frame time but there is no way to avoid such a situation. On the 1128 * other hand if the frame completed just after then we don't need 1129 * to wait long at all. Either way we are guaranteed to return to the 1130 * user immediately after a frame completion which is all that is 1131 * required. 1132 */ 1133 par->vsync_flag = 0; 1134 ret = wait_event_interruptible_timeout(par->vsync_wait, 1135 par->vsync_flag != 0, 1136 par->vsync_timeout); 1137 if (ret < 0) 1138 return ret; 1139 if (ret == 0) 1140 return -ETIMEDOUT; 1141 1142 return 0; 1143 } 1144 1145 static int fb_ioctl(struct fb_info *info, unsigned int cmd, 1146 unsigned long arg) 1147 { 1148 struct lcd_sync_arg sync_arg; 1149 1150 switch (cmd) { 1151 case FBIOGET_CONTRAST: 1152 case FBIOPUT_CONTRAST: 1153 case FBIGET_BRIGHTNESS: 1154 case FBIPUT_BRIGHTNESS: 1155 case FBIGET_COLOR: 1156 case FBIPUT_COLOR: 1157 return -ENOTTY; 1158 case FBIPUT_HSYNC: 1159 if (copy_from_user(&sync_arg, (char *)arg, 1160 sizeof(struct lcd_sync_arg))) 1161 return -EFAULT; 1162 lcd_cfg_horizontal_sync(sync_arg.back_porch, 1163 sync_arg.pulse_width, 1164 sync_arg.front_porch); 1165 break; 1166 case FBIPUT_VSYNC: 1167 if (copy_from_user(&sync_arg, (char *)arg, 1168 sizeof(struct lcd_sync_arg))) 1169 return -EFAULT; 1170 lcd_cfg_vertical_sync(sync_arg.back_porch, 1171 sync_arg.pulse_width, 1172 sync_arg.front_porch); 1173 break; 1174 case FBIO_WAITFORVSYNC: 1175 return fb_wait_for_vsync(info); 1176 default: 1177 return -EINVAL; 1178 } 1179 return 0; 1180 } 1181 1182 static int cfb_blank(int blank, struct fb_info *info) 1183 { 1184 struct da8xx_fb_par *par = info->par; 1185 int ret = 0; 1186 1187 if (par->blank == blank) 1188 return 0; 1189 1190 par->blank = blank; 1191 switch (blank) { 1192 case FB_BLANK_UNBLANK: 1193 lcd_enable_raster(); 1194 1195 if (par->panel_power_ctrl) 1196 par->panel_power_ctrl(1); 1197 break; 1198 case FB_BLANK_NORMAL: 1199 case FB_BLANK_VSYNC_SUSPEND: 1200 case FB_BLANK_HSYNC_SUSPEND: 1201 case FB_BLANK_POWERDOWN: 1202 if (par->panel_power_ctrl) 1203 par->panel_power_ctrl(0); 1204 1205 lcd_disable_raster(DA8XX_FRAME_WAIT); 1206 break; 1207 default: 1208 ret = -EINVAL; 1209 } 1210 1211 return ret; 1212 } 1213 1214 /* 1215 * Set new x,y offsets in the virtual display for the visible area and switch 1216 * to the new mode. 1217 */ 1218 static int da8xx_pan_display(struct fb_var_screeninfo *var, 1219 struct fb_info *fbi) 1220 { 1221 int ret = 0; 1222 struct fb_var_screeninfo new_var; 1223 struct da8xx_fb_par *par = fbi->par; 1224 struct fb_fix_screeninfo *fix = &fbi->fix; 1225 unsigned int end; 1226 unsigned int start; 1227 unsigned long irq_flags; 1228 1229 if (var->xoffset != fbi->var.xoffset || 1230 var->yoffset != fbi->var.yoffset) { 1231 memcpy(&new_var, &fbi->var, sizeof(new_var)); 1232 new_var.xoffset = var->xoffset; 1233 new_var.yoffset = var->yoffset; 1234 if (fb_check_var(&new_var, fbi)) 1235 ret = -EINVAL; 1236 else { 1237 memcpy(&fbi->var, &new_var, sizeof(new_var)); 1238 1239 start = fix->smem_start + 1240 new_var.yoffset * fix->line_length + 1241 new_var.xoffset * fbi->var.bits_per_pixel / 8; 1242 end = start + fbi->var.yres * fix->line_length - 1; 1243 par->dma_start = start; 1244 par->dma_end = end; 1245 spin_lock_irqsave(&par->lock_for_chan_update, 1246 irq_flags); 1247 if (par->which_dma_channel_done == 0) { 1248 lcdc_write(par->dma_start, 1249 LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); 1250 lcdc_write(par->dma_end, 1251 LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); 1252 } else if (par->which_dma_channel_done == 1) { 1253 lcdc_write(par->dma_start, 1254 LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); 1255 lcdc_write(par->dma_end, 1256 LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); 1257 } 1258 spin_unlock_irqrestore(&par->lock_for_chan_update, 1259 irq_flags); 1260 } 1261 } 1262 1263 return ret; 1264 } 1265 1266 static int da8xxfb_set_par(struct fb_info *info) 1267 { 1268 struct da8xx_fb_par *par = info->par; 1269 int ret; 1270 bool raster = da8xx_fb_is_raster_enabled(); 1271 1272 if (raster) 1273 lcd_disable_raster(DA8XX_FRAME_WAIT); 1274 1275 fb_var_to_videomode(&par->mode, &info->var); 1276 1277 par->cfg.bpp = info->var.bits_per_pixel; 1278 1279 info->fix.visual = (par->cfg.bpp <= 8) ? 1280 FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; 1281 info->fix.line_length = (par->mode.xres * par->cfg.bpp) / 8; 1282 1283 ret = lcd_init(par, &par->cfg, &par->mode); 1284 if (ret < 0) { 1285 dev_err(par->dev, "lcd init failed\n"); 1286 return ret; 1287 } 1288 1289 par->dma_start = info->fix.smem_start + 1290 info->var.yoffset * info->fix.line_length + 1291 info->var.xoffset * info->var.bits_per_pixel / 8; 1292 par->dma_end = par->dma_start + 1293 info->var.yres * info->fix.line_length - 1; 1294 1295 lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); 1296 lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); 1297 lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); 1298 lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); 1299 1300 if (raster) 1301 lcd_enable_raster(); 1302 1303 return 0; 1304 } 1305 1306 static struct fb_ops da8xx_fb_ops = { 1307 .owner = THIS_MODULE, 1308 .fb_check_var = fb_check_var, 1309 .fb_set_par = da8xxfb_set_par, 1310 .fb_setcolreg = fb_setcolreg, 1311 .fb_pan_display = da8xx_pan_display, 1312 .fb_ioctl = fb_ioctl, 1313 .fb_fillrect = cfb_fillrect, 1314 .fb_copyarea = cfb_copyarea, 1315 .fb_imageblit = cfb_imageblit, 1316 .fb_blank = cfb_blank, 1317 }; 1318 1319 static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev) 1320 { 1321 struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev); 1322 struct fb_videomode *lcdc_info; 1323 int i; 1324 1325 for (i = 0, lcdc_info = known_lcd_panels; 1326 i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) { 1327 if (strcmp(fb_pdata->type, lcdc_info->name) == 0) 1328 break; 1329 } 1330 1331 if (i == ARRAY_SIZE(known_lcd_panels)) { 1332 dev_err(&dev->dev, "no panel found\n"); 1333 return NULL; 1334 } 1335 dev_info(&dev->dev, "found %s panel\n", lcdc_info->name); 1336 1337 return lcdc_info; 1338 } 1339 1340 static int fb_probe(struct platform_device *device) 1341 { 1342 struct da8xx_lcdc_platform_data *fb_pdata = 1343 dev_get_platdata(&device->dev); 1344 struct resource *lcdc_regs; 1345 struct lcd_ctrl_config *lcd_cfg; 1346 struct fb_videomode *lcdc_info; 1347 struct fb_info *da8xx_fb_info; 1348 struct da8xx_fb_par *par; 1349 struct clk *tmp_lcdc_clk; 1350 int ret; 1351 unsigned long ulcm; 1352 1353 if (fb_pdata == NULL) { 1354 dev_err(&device->dev, "Can not get platform data\n"); 1355 return -ENOENT; 1356 } 1357 1358 lcdc_info = da8xx_fb_get_videomode(device); 1359 if (lcdc_info == NULL) 1360 return -ENODEV; 1361 1362 lcdc_regs = platform_get_resource(device, IORESOURCE_MEM, 0); 1363 da8xx_fb_reg_base = devm_ioremap_resource(&device->dev, lcdc_regs); 1364 if (IS_ERR(da8xx_fb_reg_base)) 1365 return PTR_ERR(da8xx_fb_reg_base); 1366 1367 tmp_lcdc_clk = devm_clk_get(&device->dev, "fck"); 1368 if (IS_ERR(tmp_lcdc_clk)) { 1369 dev_err(&device->dev, "Can not get device clock\n"); 1370 return PTR_ERR(tmp_lcdc_clk); 1371 } 1372 1373 pm_runtime_enable(&device->dev); 1374 pm_runtime_get_sync(&device->dev); 1375 1376 /* Determine LCD IP Version */ 1377 switch (lcdc_read(LCD_PID_REG)) { 1378 case 0x4C100102: 1379 lcd_revision = LCD_VERSION_1; 1380 break; 1381 case 0x4F200800: 1382 case 0x4F201000: 1383 lcd_revision = LCD_VERSION_2; 1384 break; 1385 default: 1386 dev_warn(&device->dev, "Unknown PID Reg value 0x%x, " 1387 "defaulting to LCD revision 1\n", 1388 lcdc_read(LCD_PID_REG)); 1389 lcd_revision = LCD_VERSION_1; 1390 break; 1391 } 1392 1393 lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data; 1394 1395 if (!lcd_cfg) { 1396 ret = -EINVAL; 1397 goto err_pm_runtime_disable; 1398 } 1399 1400 da8xx_fb_info = framebuffer_alloc(sizeof(struct da8xx_fb_par), 1401 &device->dev); 1402 if (!da8xx_fb_info) { 1403 dev_dbg(&device->dev, "Memory allocation failed for fb_info\n"); 1404 ret = -ENOMEM; 1405 goto err_pm_runtime_disable; 1406 } 1407 1408 par = da8xx_fb_info->par; 1409 par->dev = &device->dev; 1410 par->lcdc_clk = tmp_lcdc_clk; 1411 par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk); 1412 if (fb_pdata->panel_power_ctrl) { 1413 par->panel_power_ctrl = fb_pdata->panel_power_ctrl; 1414 par->panel_power_ctrl(1); 1415 } 1416 1417 fb_videomode_to_var(&da8xx_fb_var, lcdc_info); 1418 par->cfg = *lcd_cfg; 1419 1420 da8xx_fb_lcd_reset(); 1421 1422 /* allocate frame buffer */ 1423 par->vram_size = lcdc_info->xres * lcdc_info->yres * lcd_cfg->bpp; 1424 ulcm = lcm((lcdc_info->xres * lcd_cfg->bpp)/8, PAGE_SIZE); 1425 par->vram_size = roundup(par->vram_size/8, ulcm); 1426 par->vram_size = par->vram_size * LCD_NUM_BUFFERS; 1427 1428 par->vram_virt = dma_alloc_coherent(NULL, 1429 par->vram_size, 1430 &par->vram_phys, 1431 GFP_KERNEL | GFP_DMA); 1432 if (!par->vram_virt) { 1433 dev_err(&device->dev, 1434 "GLCD: kmalloc for frame buffer failed\n"); 1435 ret = -EINVAL; 1436 goto err_release_fb; 1437 } 1438 1439 da8xx_fb_info->screen_base = (char __iomem *) par->vram_virt; 1440 da8xx_fb_fix.smem_start = par->vram_phys; 1441 da8xx_fb_fix.smem_len = par->vram_size; 1442 da8xx_fb_fix.line_length = (lcdc_info->xres * lcd_cfg->bpp) / 8; 1443 1444 par->dma_start = par->vram_phys; 1445 par->dma_end = par->dma_start + lcdc_info->yres * 1446 da8xx_fb_fix.line_length - 1; 1447 1448 /* allocate palette buffer */ 1449 par->v_palette_base = dma_alloc_coherent(NULL, PALETTE_SIZE, 1450 &par->p_palette_base, 1451 GFP_KERNEL | GFP_DMA); 1452 if (!par->v_palette_base) { 1453 dev_err(&device->dev, 1454 "GLCD: kmalloc for palette buffer failed\n"); 1455 ret = -EINVAL; 1456 goto err_release_fb_mem; 1457 } 1458 1459 par->irq = platform_get_irq(device, 0); 1460 if (par->irq < 0) { 1461 ret = -ENOENT; 1462 goto err_release_pl_mem; 1463 } 1464 1465 da8xx_fb_var.grayscale = 1466 lcd_cfg->panel_shade == MONOCHROME ? 1 : 0; 1467 da8xx_fb_var.bits_per_pixel = lcd_cfg->bpp; 1468 1469 /* Initialize fbinfo */ 1470 da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT; 1471 da8xx_fb_info->fix = da8xx_fb_fix; 1472 da8xx_fb_info->var = da8xx_fb_var; 1473 da8xx_fb_info->fbops = &da8xx_fb_ops; 1474 da8xx_fb_info->pseudo_palette = par->pseudo_palette; 1475 da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ? 1476 FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; 1477 1478 ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0); 1479 if (ret) 1480 goto err_release_pl_mem; 1481 da8xx_fb_info->cmap.len = par->palette_sz; 1482 1483 /* initialize var_screeninfo */ 1484 da8xx_fb_var.activate = FB_ACTIVATE_FORCE; 1485 fb_set_var(da8xx_fb_info, &da8xx_fb_var); 1486 1487 dev_set_drvdata(&device->dev, da8xx_fb_info); 1488 1489 /* initialize the vsync wait queue */ 1490 init_waitqueue_head(&par->vsync_wait); 1491 par->vsync_timeout = HZ / 5; 1492 par->which_dma_channel_done = -1; 1493 spin_lock_init(&par->lock_for_chan_update); 1494 1495 /* Register the Frame Buffer */ 1496 if (register_framebuffer(da8xx_fb_info) < 0) { 1497 dev_err(&device->dev, 1498 "GLCD: Frame Buffer Registration Failed!\n"); 1499 ret = -EINVAL; 1500 goto err_dealloc_cmap; 1501 } 1502 1503 #ifdef CONFIG_CPU_FREQ 1504 ret = lcd_da8xx_cpufreq_register(par); 1505 if (ret) { 1506 dev_err(&device->dev, "failed to register cpufreq\n"); 1507 goto err_cpu_freq; 1508 } 1509 #endif 1510 1511 if (lcd_revision == LCD_VERSION_1) 1512 lcdc_irq_handler = lcdc_irq_handler_rev01; 1513 else { 1514 init_waitqueue_head(&frame_done_wq); 1515 lcdc_irq_handler = lcdc_irq_handler_rev02; 1516 } 1517 1518 ret = devm_request_irq(&device->dev, par->irq, lcdc_irq_handler, 0, 1519 DRIVER_NAME, par); 1520 if (ret) 1521 goto irq_freq; 1522 return 0; 1523 1524 irq_freq: 1525 #ifdef CONFIG_CPU_FREQ 1526 lcd_da8xx_cpufreq_deregister(par); 1527 err_cpu_freq: 1528 #endif 1529 unregister_framebuffer(da8xx_fb_info); 1530 1531 err_dealloc_cmap: 1532 fb_dealloc_cmap(&da8xx_fb_info->cmap); 1533 1534 err_release_pl_mem: 1535 dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base, 1536 par->p_palette_base); 1537 1538 err_release_fb_mem: 1539 dma_free_coherent(NULL, par->vram_size, par->vram_virt, par->vram_phys); 1540 1541 err_release_fb: 1542 framebuffer_release(da8xx_fb_info); 1543 1544 err_pm_runtime_disable: 1545 pm_runtime_put_sync(&device->dev); 1546 pm_runtime_disable(&device->dev); 1547 1548 return ret; 1549 } 1550 1551 #ifdef CONFIG_PM_SLEEP 1552 static struct lcdc_context { 1553 u32 clk_enable; 1554 u32 ctrl; 1555 u32 dma_ctrl; 1556 u32 raster_timing_0; 1557 u32 raster_timing_1; 1558 u32 raster_timing_2; 1559 u32 int_enable_set; 1560 u32 dma_frm_buf_base_addr_0; 1561 u32 dma_frm_buf_ceiling_addr_0; 1562 u32 dma_frm_buf_base_addr_1; 1563 u32 dma_frm_buf_ceiling_addr_1; 1564 u32 raster_ctrl; 1565 } reg_context; 1566 1567 static void lcd_context_save(void) 1568 { 1569 if (lcd_revision == LCD_VERSION_2) { 1570 reg_context.clk_enable = lcdc_read(LCD_CLK_ENABLE_REG); 1571 reg_context.int_enable_set = lcdc_read(LCD_INT_ENABLE_SET_REG); 1572 } 1573 1574 reg_context.ctrl = lcdc_read(LCD_CTRL_REG); 1575 reg_context.dma_ctrl = lcdc_read(LCD_DMA_CTRL_REG); 1576 reg_context.raster_timing_0 = lcdc_read(LCD_RASTER_TIMING_0_REG); 1577 reg_context.raster_timing_1 = lcdc_read(LCD_RASTER_TIMING_1_REG); 1578 reg_context.raster_timing_2 = lcdc_read(LCD_RASTER_TIMING_2_REG); 1579 reg_context.dma_frm_buf_base_addr_0 = 1580 lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); 1581 reg_context.dma_frm_buf_ceiling_addr_0 = 1582 lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); 1583 reg_context.dma_frm_buf_base_addr_1 = 1584 lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); 1585 reg_context.dma_frm_buf_ceiling_addr_1 = 1586 lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); 1587 reg_context.raster_ctrl = lcdc_read(LCD_RASTER_CTRL_REG); 1588 return; 1589 } 1590 1591 static void lcd_context_restore(void) 1592 { 1593 if (lcd_revision == LCD_VERSION_2) { 1594 lcdc_write(reg_context.clk_enable, LCD_CLK_ENABLE_REG); 1595 lcdc_write(reg_context.int_enable_set, LCD_INT_ENABLE_SET_REG); 1596 } 1597 1598 lcdc_write(reg_context.ctrl, LCD_CTRL_REG); 1599 lcdc_write(reg_context.dma_ctrl, LCD_DMA_CTRL_REG); 1600 lcdc_write(reg_context.raster_timing_0, LCD_RASTER_TIMING_0_REG); 1601 lcdc_write(reg_context.raster_timing_1, LCD_RASTER_TIMING_1_REG); 1602 lcdc_write(reg_context.raster_timing_2, LCD_RASTER_TIMING_2_REG); 1603 lcdc_write(reg_context.dma_frm_buf_base_addr_0, 1604 LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); 1605 lcdc_write(reg_context.dma_frm_buf_ceiling_addr_0, 1606 LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); 1607 lcdc_write(reg_context.dma_frm_buf_base_addr_1, 1608 LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); 1609 lcdc_write(reg_context.dma_frm_buf_ceiling_addr_1, 1610 LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); 1611 lcdc_write(reg_context.raster_ctrl, LCD_RASTER_CTRL_REG); 1612 return; 1613 } 1614 1615 static int fb_suspend(struct device *dev) 1616 { 1617 struct fb_info *info = dev_get_drvdata(dev); 1618 struct da8xx_fb_par *par = info->par; 1619 1620 console_lock(); 1621 if (par->panel_power_ctrl) 1622 par->panel_power_ctrl(0); 1623 1624 fb_set_suspend(info, 1); 1625 lcd_disable_raster(DA8XX_FRAME_WAIT); 1626 lcd_context_save(); 1627 pm_runtime_put_sync(dev); 1628 console_unlock(); 1629 1630 return 0; 1631 } 1632 static int fb_resume(struct device *dev) 1633 { 1634 struct fb_info *info = dev_get_drvdata(dev); 1635 struct da8xx_fb_par *par = info->par; 1636 1637 console_lock(); 1638 pm_runtime_get_sync(dev); 1639 lcd_context_restore(); 1640 if (par->blank == FB_BLANK_UNBLANK) { 1641 lcd_enable_raster(); 1642 1643 if (par->panel_power_ctrl) 1644 par->panel_power_ctrl(1); 1645 } 1646 1647 fb_set_suspend(info, 0); 1648 console_unlock(); 1649 1650 return 0; 1651 } 1652 #endif 1653 1654 static SIMPLE_DEV_PM_OPS(fb_pm_ops, fb_suspend, fb_resume); 1655 1656 static struct platform_driver da8xx_fb_driver = { 1657 .probe = fb_probe, 1658 .remove = fb_remove, 1659 .driver = { 1660 .name = DRIVER_NAME, 1661 .pm = &fb_pm_ops, 1662 }, 1663 }; 1664 module_platform_driver(da8xx_fb_driver); 1665 1666 MODULE_DESCRIPTION("Framebuffer driver for TI da8xx/omap-l1xx"); 1667 MODULE_AUTHOR("Texas Instruments"); 1668 MODULE_LICENSE("GPL"); 1669