1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  linux/drivers/video/cyber2000fb.c
4  *
5  *  Copyright (C) 1998-2002 Russell King
6  *
7  *  MIPS and 50xx clock support
8  *  Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
9  *
10  *  32 bit support, text color and panning fixes for modes != 8 bit
11  *  Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
12  *
13  * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
14  *
15  * Based on cyberfb.c.
16  *
17  * Note that we now use the new fbcon fix, var and cmap scheme.  We do
18  * still have to check which console is the currently displayed one
19  * however, especially for the colourmap stuff.
20  *
21  * We also use the new hotplug PCI subsystem.  I'm not sure if there
22  * are any such cards, but I'm erring on the side of caution.  We don't
23  * want to go pop just because someone does have one.
24  *
25  * Note that this doesn't work fully in the case of multiple CyberPro
26  * cards with grabbers.  We currently can only attach to the first
27  * CyberPro card found.
28  *
29  * When we're in truecolour mode, we power down the LUT RAM as a power
30  * saving feature.  Also, when we enter any of the powersaving modes
31  * (except soft blanking) we power down the RAMDACs.  This saves about
32  * 1W, which is roughly 8% of the power consumption of a NetWinder
33  * (which, incidentally, is about the same saving as a 2.5in hard disk
34  * entering standby mode.)
35  */
36 #include <linux/module.h>
37 #include <linux/kernel.h>
38 #include <linux/errno.h>
39 #include <linux/string.h>
40 #include <linux/mm.h>
41 #include <linux/slab.h>
42 #include <linux/delay.h>
43 #include <linux/fb.h>
44 #include <linux/pci.h>
45 #include <linux/init.h>
46 #include <linux/io.h>
47 #include <linux/i2c.h>
48 #include <linux/i2c-algo-bit.h>
49 
50 
51 #ifdef __arm__
52 #include <asm/mach-types.h>
53 #endif
54 
55 #include "cyber2000fb.h"
56 
57 struct cfb_info {
58 	struct fb_info		fb;
59 	struct display_switch	*dispsw;
60 	unsigned char		__iomem *region;
61 	unsigned char		__iomem *regs;
62 	u_int			id;
63 	u_int			irq;
64 	int			func_use_count;
65 	u_long			ref_ps;
66 
67 	/*
68 	 * Clock divisors
69 	 */
70 	u_int			divisors[4];
71 
72 	struct {
73 		u8 red, green, blue;
74 	} palette[NR_PALETTE];
75 
76 	u_char			mem_ctl1;
77 	u_char			mem_ctl2;
78 	u_char			mclk_mult;
79 	u_char			mclk_div;
80 	/*
81 	 * RAMDAC control register is both of these or'ed together
82 	 */
83 	u_char			ramdac_ctrl;
84 	u_char			ramdac_powerdown;
85 
86 	u32			pseudo_palette[16];
87 
88 	spinlock_t		reg_b0_lock;
89 
90 #ifdef CONFIG_FB_CYBER2000_DDC
91 	bool			ddc_registered;
92 	struct i2c_adapter	ddc_adapter;
93 	struct i2c_algo_bit_data	ddc_algo;
94 #endif
95 
96 #ifdef CONFIG_FB_CYBER2000_I2C
97 	struct i2c_adapter	i2c_adapter;
98 	struct i2c_algo_bit_data i2c_algo;
99 #endif
100 };
101 
102 static char *default_font = "Acorn8x8";
103 module_param(default_font, charp, 0);
104 MODULE_PARM_DESC(default_font, "Default font name");
105 
106 /*
107  * Our access methods.
108  */
109 #define cyber2000fb_writel(val, reg, cfb)	writel(val, (cfb)->regs + (reg))
110 #define cyber2000fb_writew(val, reg, cfb)	writew(val, (cfb)->regs + (reg))
111 #define cyber2000fb_writeb(val, reg, cfb)	writeb(val, (cfb)->regs + (reg))
112 
113 #define cyber2000fb_readb(reg, cfb)		readb((cfb)->regs + (reg))
114 
115 static inline void
116 cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
117 {
118 	cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
119 }
120 
121 static inline void
122 cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
123 {
124 	cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
125 }
126 
127 static inline unsigned int
128 cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
129 {
130 	cyber2000fb_writeb(reg, 0x3ce, cfb);
131 	return cyber2000fb_readb(0x3cf, cfb);
132 }
133 
134 static inline void
135 cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
136 {
137 	cyber2000fb_readb(0x3da, cfb);
138 	cyber2000fb_writeb(reg, 0x3c0, cfb);
139 	cyber2000fb_readb(0x3c1, cfb);
140 	cyber2000fb_writeb(val, 0x3c0, cfb);
141 }
142 
143 static inline void
144 cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
145 {
146 	cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
147 }
148 
149 /* -------------------- Hardware specific routines ------------------------- */
150 
151 /*
152  * Hardware Cyber2000 Acceleration
153  */
154 static void
155 cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
156 {
157 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
158 	unsigned long dst, col;
159 
160 	if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
161 		cfb_fillrect(info, rect);
162 		return;
163 	}
164 
165 	cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
166 	cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
167 	cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
168 
169 	col = rect->color;
170 	if (cfb->fb.var.bits_per_pixel > 8)
171 		col = ((u32 *)cfb->fb.pseudo_palette)[col];
172 	cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
173 
174 	dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
175 	if (cfb->fb.var.bits_per_pixel == 24) {
176 		cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
177 		dst *= 3;
178 	}
179 
180 	cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
181 	cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
182 	cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
183 	cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
184 }
185 
186 static void
187 cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
188 {
189 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
190 	unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
191 	unsigned long src, dst;
192 
193 	if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
194 		cfb_copyarea(info, region);
195 		return;
196 	}
197 
198 	cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
199 	cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
200 	cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
201 
202 	src = region->sx + region->sy * cfb->fb.var.xres_virtual;
203 	dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
204 
205 	if (region->sx < region->dx) {
206 		src += region->width - 1;
207 		dst += region->width - 1;
208 		cmd |= CO_CMD_L_INC_LEFT;
209 	}
210 
211 	if (region->sy < region->dy) {
212 		src += (region->height - 1) * cfb->fb.var.xres_virtual;
213 		dst += (region->height - 1) * cfb->fb.var.xres_virtual;
214 		cmd |= CO_CMD_L_INC_UP;
215 	}
216 
217 	if (cfb->fb.var.bits_per_pixel == 24) {
218 		cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
219 		src *= 3;
220 		dst *= 3;
221 	}
222 	cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
223 	cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
224 	cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
225 	cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
226 	cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
227 			   CO_REG_CMD_H, cfb);
228 }
229 
230 static void
231 cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
232 {
233 	cfb_imageblit(info, image);
234 	return;
235 }
236 
237 static int cyber2000fb_sync(struct fb_info *info)
238 {
239 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
240 	int count = 100000;
241 
242 	if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
243 		return 0;
244 
245 	while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
246 		if (!count--) {
247 			debug_printf("accel_wait timed out\n");
248 			cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
249 			break;
250 		}
251 		udelay(1);
252 	}
253 	return 0;
254 }
255 
256 /*
257  * ===========================================================================
258  */
259 
260 static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
261 {
262 	u_int mask = (1 << bf->length) - 1;
263 
264 	return (val >> (16 - bf->length) & mask) << bf->offset;
265 }
266 
267 /*
268  *    Set a single color register. Return != 0 for invalid regno.
269  */
270 static int
271 cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
272 		      u_int transp, struct fb_info *info)
273 {
274 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
275 	struct fb_var_screeninfo *var = &cfb->fb.var;
276 	u32 pseudo_val;
277 	int ret = 1;
278 
279 	switch (cfb->fb.fix.visual) {
280 	default:
281 		return 1;
282 
283 	/*
284 	 * Pseudocolour:
285 	 *	   8     8
286 	 * pixel --/--+--/-->  red lut  --> red dac
287 	 *	      |  8
288 	 *	      +--/--> green lut --> green dac
289 	 *	      |  8
290 	 *	      +--/-->  blue lut --> blue dac
291 	 */
292 	case FB_VISUAL_PSEUDOCOLOR:
293 		if (regno >= NR_PALETTE)
294 			return 1;
295 
296 		red >>= 8;
297 		green >>= 8;
298 		blue >>= 8;
299 
300 		cfb->palette[regno].red = red;
301 		cfb->palette[regno].green = green;
302 		cfb->palette[regno].blue = blue;
303 
304 		cyber2000fb_writeb(regno, 0x3c8, cfb);
305 		cyber2000fb_writeb(red, 0x3c9, cfb);
306 		cyber2000fb_writeb(green, 0x3c9, cfb);
307 		cyber2000fb_writeb(blue, 0x3c9, cfb);
308 		return 0;
309 
310 	/*
311 	 * Direct colour:
312 	 *	   n     rl
313 	 * pixel --/--+--/-->  red lut  --> red dac
314 	 *	      |  gl
315 	 *	      +--/--> green lut --> green dac
316 	 *	      |  bl
317 	 *	      +--/-->  blue lut --> blue dac
318 	 * n = bpp, rl = red length, gl = green length, bl = blue length
319 	 */
320 	case FB_VISUAL_DIRECTCOLOR:
321 		red >>= 8;
322 		green >>= 8;
323 		blue >>= 8;
324 
325 		if (var->green.length == 6 && regno < 64) {
326 			cfb->palette[regno << 2].green = green;
327 
328 			/*
329 			 * The 6 bits of the green component are applied
330 			 * to the high 6 bits of the LUT.
331 			 */
332 			cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
333 			cyber2000fb_writeb(cfb->palette[regno >> 1].red,
334 					   0x3c9, cfb);
335 			cyber2000fb_writeb(green, 0x3c9, cfb);
336 			cyber2000fb_writeb(cfb->palette[regno >> 1].blue,
337 					   0x3c9, cfb);
338 
339 			green = cfb->palette[regno << 3].green;
340 
341 			ret = 0;
342 		}
343 
344 		if (var->green.length >= 5 && regno < 32) {
345 			cfb->palette[regno << 3].red = red;
346 			cfb->palette[regno << 3].green = green;
347 			cfb->palette[regno << 3].blue = blue;
348 
349 			/*
350 			 * The 5 bits of each colour component are
351 			 * applied to the high 5 bits of the LUT.
352 			 */
353 			cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
354 			cyber2000fb_writeb(red, 0x3c9, cfb);
355 			cyber2000fb_writeb(green, 0x3c9, cfb);
356 			cyber2000fb_writeb(blue, 0x3c9, cfb);
357 			ret = 0;
358 		}
359 
360 		if (var->green.length == 4 && regno < 16) {
361 			cfb->palette[regno << 4].red = red;
362 			cfb->palette[regno << 4].green = green;
363 			cfb->palette[regno << 4].blue = blue;
364 
365 			/*
366 			 * The 5 bits of each colour component are
367 			 * applied to the high 5 bits of the LUT.
368 			 */
369 			cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
370 			cyber2000fb_writeb(red, 0x3c9, cfb);
371 			cyber2000fb_writeb(green, 0x3c9, cfb);
372 			cyber2000fb_writeb(blue, 0x3c9, cfb);
373 			ret = 0;
374 		}
375 
376 		/*
377 		 * Since this is only used for the first 16 colours, we
378 		 * don't have to care about overflowing for regno >= 32
379 		 */
380 		pseudo_val = regno << var->red.offset |
381 			     regno << var->green.offset |
382 			     regno << var->blue.offset;
383 		break;
384 
385 	/*
386 	 * True colour:
387 	 *	   n     rl
388 	 * pixel --/--+--/--> red dac
389 	 *	      |  gl
390 	 *	      +--/--> green dac
391 	 *	      |  bl
392 	 *	      +--/--> blue dac
393 	 * n = bpp, rl = red length, gl = green length, bl = blue length
394 	 */
395 	case FB_VISUAL_TRUECOLOR:
396 		pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
397 		pseudo_val |= convert_bitfield(red, &var->red);
398 		pseudo_val |= convert_bitfield(green, &var->green);
399 		pseudo_val |= convert_bitfield(blue, &var->blue);
400 		ret = 0;
401 		break;
402 	}
403 
404 	/*
405 	 * Now set our pseudo palette for the CFB16/24/32 drivers.
406 	 */
407 	if (regno < 16)
408 		((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
409 
410 	return ret;
411 }
412 
413 struct par_info {
414 	/*
415 	 * Hardware
416 	 */
417 	u_char	clock_mult;
418 	u_char	clock_div;
419 	u_char	extseqmisc;
420 	u_char	co_pixfmt;
421 	u_char	crtc_ofl;
422 	u_char	crtc[19];
423 	u_int	width;
424 	u_int	pitch;
425 	u_int	fetch;
426 
427 	/*
428 	 * Other
429 	 */
430 	u_char	ramdac;
431 };
432 
433 static const u_char crtc_idx[] = {
434 	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
435 	0x08, 0x09,
436 	0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
437 };
438 
439 static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
440 {
441 	unsigned int i;
442 	unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
443 
444 	cyber2000fb_writeb(0x56, 0x3ce, cfb);
445 	i = cyber2000fb_readb(0x3cf, cfb);
446 	cyber2000fb_writeb(i | 4, 0x3cf, cfb);
447 	cyber2000fb_writeb(val, 0x3c6, cfb);
448 	cyber2000fb_writeb(i, 0x3cf, cfb);
449 	/* prevent card lock-up observed on x86 with CyberPro 2000 */
450 	cyber2000fb_readb(0x3cf, cfb);
451 }
452 
453 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
454 {
455 	u_int i;
456 
457 	/*
458 	 * Blank palette
459 	 */
460 	for (i = 0; i < NR_PALETTE; i++) {
461 		cyber2000fb_writeb(i, 0x3c8, cfb);
462 		cyber2000fb_writeb(0, 0x3c9, cfb);
463 		cyber2000fb_writeb(0, 0x3c9, cfb);
464 		cyber2000fb_writeb(0, 0x3c9, cfb);
465 	}
466 
467 	cyber2000fb_writeb(0xef, 0x3c2, cfb);
468 	cyber2000_crtcw(0x11, 0x0b, cfb);
469 	cyber2000_attrw(0x11, 0x00, cfb);
470 
471 	cyber2000_seqw(0x00, 0x01, cfb);
472 	cyber2000_seqw(0x01, 0x01, cfb);
473 	cyber2000_seqw(0x02, 0x0f, cfb);
474 	cyber2000_seqw(0x03, 0x00, cfb);
475 	cyber2000_seqw(0x04, 0x0e, cfb);
476 	cyber2000_seqw(0x00, 0x03, cfb);
477 
478 	for (i = 0; i < sizeof(crtc_idx); i++)
479 		cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
480 
481 	for (i = 0x0a; i < 0x10; i++)
482 		cyber2000_crtcw(i, 0, cfb);
483 
484 	cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
485 	cyber2000_grphw(0x00, 0x00, cfb);
486 	cyber2000_grphw(0x01, 0x00, cfb);
487 	cyber2000_grphw(0x02, 0x00, cfb);
488 	cyber2000_grphw(0x03, 0x00, cfb);
489 	cyber2000_grphw(0x04, 0x00, cfb);
490 	cyber2000_grphw(0x05, 0x60, cfb);
491 	cyber2000_grphw(0x06, 0x05, cfb);
492 	cyber2000_grphw(0x07, 0x0f, cfb);
493 	cyber2000_grphw(0x08, 0xff, cfb);
494 
495 	/* Attribute controller registers */
496 	for (i = 0; i < 16; i++)
497 		cyber2000_attrw(i, i, cfb);
498 
499 	cyber2000_attrw(0x10, 0x01, cfb);
500 	cyber2000_attrw(0x11, 0x00, cfb);
501 	cyber2000_attrw(0x12, 0x0f, cfb);
502 	cyber2000_attrw(0x13, 0x00, cfb);
503 	cyber2000_attrw(0x14, 0x00, cfb);
504 
505 	/* PLL registers */
506 	spin_lock(&cfb->reg_b0_lock);
507 	cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
508 	cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
509 	cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
510 	cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
511 	cyber2000_grphw(0x90, 0x01, cfb);
512 	cyber2000_grphw(0xb9, 0x80, cfb);
513 	cyber2000_grphw(0xb9, 0x00, cfb);
514 	spin_unlock(&cfb->reg_b0_lock);
515 
516 	cfb->ramdac_ctrl = hw->ramdac;
517 	cyber2000fb_write_ramdac_ctrl(cfb);
518 
519 	cyber2000fb_writeb(0x20, 0x3c0, cfb);
520 	cyber2000fb_writeb(0xff, 0x3c6, cfb);
521 
522 	cyber2000_grphw(0x14, hw->fetch, cfb);
523 	cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
524 			      ((hw->pitch >> 4) & 0x30), cfb);
525 	cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
526 
527 	/*
528 	 * Set up accelerator registers
529 	 */
530 	cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
531 	cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
532 	cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
533 }
534 
535 static inline int
536 cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
537 {
538 	u_int base = var->yoffset * var->xres_virtual + var->xoffset;
539 
540 	base *= var->bits_per_pixel;
541 
542 	/*
543 	 * Convert to bytes and shift two extra bits because DAC
544 	 * can only start on 4 byte aligned data.
545 	 */
546 	base >>= 5;
547 
548 	if (base >= 1 << 20)
549 		return -EINVAL;
550 
551 	cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
552 	cyber2000_crtcw(0x0c, base >> 8, cfb);
553 	cyber2000_crtcw(0x0d, base, cfb);
554 
555 	return 0;
556 }
557 
558 static int
559 cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
560 			struct fb_var_screeninfo *var)
561 {
562 	u_int Htotal, Hblankend, Hsyncend;
563 	u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
564 #define ENCODE_BIT(v, b1, m, b2) ((((v) >> (b1)) & (m)) << (b2))
565 
566 	hw->crtc[13] = hw->pitch;
567 	hw->crtc[17] = 0xe3;
568 	hw->crtc[14] = 0;
569 	hw->crtc[8]  = 0;
570 
571 	Htotal     = var->xres + var->right_margin +
572 		     var->hsync_len + var->left_margin;
573 
574 	if (Htotal > 2080)
575 		return -EINVAL;
576 
577 	hw->crtc[0] = (Htotal >> 3) - 5;
578 	hw->crtc[1] = (var->xres >> 3) - 1;
579 	hw->crtc[2] = var->xres >> 3;
580 	hw->crtc[4] = (var->xres + var->right_margin) >> 3;
581 
582 	Hblankend   = (Htotal - 4 * 8) >> 3;
583 
584 	hw->crtc[3] = ENCODE_BIT(Hblankend,  0, 0x1f,  0) |
585 		      ENCODE_BIT(1,          0, 0x01,  7);
586 
587 	Hsyncend    = (var->xres + var->right_margin + var->hsync_len) >> 3;
588 
589 	hw->crtc[5] = ENCODE_BIT(Hsyncend,   0, 0x1f,  0) |
590 		      ENCODE_BIT(Hblankend,  5, 0x01,  7);
591 
592 	Vdispend    = var->yres - 1;
593 	Vsyncstart  = var->yres + var->lower_margin;
594 	Vsyncend    = var->yres + var->lower_margin + var->vsync_len;
595 	Vtotal      = var->yres + var->lower_margin + var->vsync_len +
596 		      var->upper_margin - 2;
597 
598 	if (Vtotal > 2047)
599 		return -EINVAL;
600 
601 	Vblankstart = var->yres + 6;
602 	Vblankend   = Vtotal - 10;
603 
604 	hw->crtc[6]  = Vtotal;
605 	hw->crtc[7]  = ENCODE_BIT(Vtotal,     8, 0x01,  0) |
606 			ENCODE_BIT(Vdispend,   8, 0x01,  1) |
607 			ENCODE_BIT(Vsyncstart, 8, 0x01,  2) |
608 			ENCODE_BIT(Vblankstart, 8, 0x01,  3) |
609 			ENCODE_BIT(1,          0, 0x01,  4) |
610 			ENCODE_BIT(Vtotal,     9, 0x01,  5) |
611 			ENCODE_BIT(Vdispend,   9, 0x01,  6) |
612 			ENCODE_BIT(Vsyncstart, 9, 0x01,  7);
613 	hw->crtc[9]  = ENCODE_BIT(0,          0, 0x1f,  0) |
614 			ENCODE_BIT(Vblankstart, 9, 0x01,  5) |
615 			ENCODE_BIT(1,          0, 0x01,  6);
616 	hw->crtc[10] = Vsyncstart;
617 	hw->crtc[11] = ENCODE_BIT(Vsyncend,   0, 0x0f,  0) |
618 		       ENCODE_BIT(1,          0, 0x01,  7);
619 	hw->crtc[12] = Vdispend;
620 	hw->crtc[15] = Vblankstart;
621 	hw->crtc[16] = Vblankend;
622 	hw->crtc[18] = 0xff;
623 
624 	/*
625 	 * overflow - graphics reg 0x11
626 	 * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
627 	 * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
628 	 */
629 	hw->crtc_ofl =
630 		ENCODE_BIT(Vtotal, 10, 0x01, 0) |
631 		ENCODE_BIT(Vdispend, 10, 0x01, 1) |
632 		ENCODE_BIT(Vsyncstart, 10, 0x01, 2) |
633 		ENCODE_BIT(Vblankstart, 10, 0x01, 3) |
634 		EXT_CRT_VRTOFL_LINECOMP10;
635 
636 	/* woody: set the interlaced bit... */
637 	/* FIXME: what about doublescan? */
638 	if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
639 		hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
640 
641 	return 0;
642 }
643 
644 /*
645  * The following was discovered by a good monitor, bit twiddling, theorising
646  * and but mostly luck.  Strangely, it looks like everyone elses' PLL!
647  *
648  * Clock registers:
649  *   fclock = fpll / div2
650  *   fpll   = fref * mult / div1
651  * where:
652  *   fref = 14.318MHz (69842ps)
653  *   mult = reg0xb0.7:0
654  *   div1 = (reg0xb1.5:0 + 1)
655  *   div2 =  2^(reg0xb1.7:6)
656  *   fpll should be between 115 and 260 MHz
657  *  (8696ps and 3846ps)
658  */
659 static int
660 cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
661 			 struct fb_var_screeninfo *var)
662 {
663 	u_long pll_ps = var->pixclock;
664 	const u_long ref_ps = cfb->ref_ps;
665 	u_int div2, t_div1, best_div1, best_mult;
666 	int best_diff;
667 	int vco;
668 
669 	/*
670 	 * Step 1:
671 	 *   find div2 such that 115MHz < fpll < 260MHz
672 	 *   and 0 <= div2 < 4
673 	 */
674 	for (div2 = 0; div2 < 4; div2++) {
675 		u_long new_pll;
676 
677 		new_pll = pll_ps / cfb->divisors[div2];
678 		if (8696 > new_pll && new_pll > 3846) {
679 			pll_ps = new_pll;
680 			break;
681 		}
682 	}
683 
684 	if (div2 == 4)
685 		return -EINVAL;
686 
687 	/*
688 	 * Step 2:
689 	 *  Given pll_ps and ref_ps, find:
690 	 *    pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
691 	 *  where { 1 < best_div1 < 32, 1 < best_mult < 256 }
692 	 *    pll_ps_calc = best_div1 / (ref_ps * best_mult)
693 	 */
694 	best_diff = 0x7fffffff;
695 	best_mult = 2;
696 	best_div1 = 32;
697 	for (t_div1 = 2; t_div1 < 32; t_div1 += 1) {
698 		u_int rr, t_mult, t_pll_ps;
699 		int diff;
700 
701 		/*
702 		 * Find the multiplier for this divisor
703 		 */
704 		rr = ref_ps * t_div1;
705 		t_mult = (rr + pll_ps / 2) / pll_ps;
706 
707 		/*
708 		 * Is the multiplier within the correct range?
709 		 */
710 		if (t_mult > 256 || t_mult < 2)
711 			continue;
712 
713 		/*
714 		 * Calculate the actual clock period from this multiplier
715 		 * and divisor, and estimate the error.
716 		 */
717 		t_pll_ps = (rr + t_mult / 2) / t_mult;
718 		diff = pll_ps - t_pll_ps;
719 		if (diff < 0)
720 			diff = -diff;
721 
722 		if (diff < best_diff) {
723 			best_diff = diff;
724 			best_mult = t_mult;
725 			best_div1 = t_div1;
726 		}
727 
728 		/*
729 		 * If we hit an exact value, there is no point in continuing.
730 		 */
731 		if (diff == 0)
732 			break;
733 	}
734 
735 	/*
736 	 * Step 3:
737 	 *  combine values
738 	 */
739 	hw->clock_mult = best_mult - 1;
740 	hw->clock_div  = div2 << 6 | (best_div1 - 1);
741 
742 	vco = ref_ps * best_div1 / best_mult;
743 	if ((ref_ps == 40690) && (vco < 5556))
744 		/* Set VFSEL when VCO > 180MHz (5.556 ps). */
745 		hw->clock_div |= EXT_DCLK_DIV_VFSEL;
746 
747 	return 0;
748 }
749 
750 /*
751  *    Set the User Defined Part of the Display
752  */
753 static int
754 cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
755 {
756 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
757 	struct par_info hw;
758 	unsigned int mem;
759 	int err;
760 
761 	var->transp.msb_right	= 0;
762 	var->red.msb_right	= 0;
763 	var->green.msb_right	= 0;
764 	var->blue.msb_right	= 0;
765 	var->transp.offset	= 0;
766 	var->transp.length	= 0;
767 
768 	switch (var->bits_per_pixel) {
769 	case 8:	/* PSEUDOCOLOUR, 256 */
770 		var->red.offset		= 0;
771 		var->red.length		= 8;
772 		var->green.offset	= 0;
773 		var->green.length	= 8;
774 		var->blue.offset	= 0;
775 		var->blue.length	= 8;
776 		break;
777 
778 	case 16:/* DIRECTCOLOUR, 64k or 32k */
779 		switch (var->green.length) {
780 		case 6: /* RGB565, 64k */
781 			var->red.offset		= 11;
782 			var->red.length		= 5;
783 			var->green.offset	= 5;
784 			var->green.length	= 6;
785 			var->blue.offset	= 0;
786 			var->blue.length	= 5;
787 			break;
788 
789 		default:
790 		case 5: /* RGB555, 32k */
791 			var->red.offset		= 10;
792 			var->red.length		= 5;
793 			var->green.offset	= 5;
794 			var->green.length	= 5;
795 			var->blue.offset	= 0;
796 			var->blue.length	= 5;
797 			break;
798 
799 		case 4: /* RGB444, 4k + transparency? */
800 			var->transp.offset	= 12;
801 			var->transp.length	= 4;
802 			var->red.offset		= 8;
803 			var->red.length		= 4;
804 			var->green.offset	= 4;
805 			var->green.length	= 4;
806 			var->blue.offset	= 0;
807 			var->blue.length	= 4;
808 			break;
809 		}
810 		break;
811 
812 	case 24:/* TRUECOLOUR, 16m */
813 		var->red.offset		= 16;
814 		var->red.length		= 8;
815 		var->green.offset	= 8;
816 		var->green.length	= 8;
817 		var->blue.offset	= 0;
818 		var->blue.length	= 8;
819 		break;
820 
821 	case 32:/* TRUECOLOUR, 16m */
822 		var->transp.offset	= 24;
823 		var->transp.length	= 8;
824 		var->red.offset		= 16;
825 		var->red.length		= 8;
826 		var->green.offset	= 8;
827 		var->green.length	= 8;
828 		var->blue.offset	= 0;
829 		var->blue.length	= 8;
830 		break;
831 
832 	default:
833 		return -EINVAL;
834 	}
835 
836 	mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
837 	if (mem > cfb->fb.fix.smem_len)
838 		var->yres_virtual = cfb->fb.fix.smem_len * 8 /
839 				    (var->bits_per_pixel * var->xres_virtual);
840 
841 	if (var->yres > var->yres_virtual)
842 		var->yres = var->yres_virtual;
843 	if (var->xres > var->xres_virtual)
844 		var->xres = var->xres_virtual;
845 
846 	err = cyber2000fb_decode_clock(&hw, cfb, var);
847 	if (err)
848 		return err;
849 
850 	err = cyber2000fb_decode_crtc(&hw, cfb, var);
851 	if (err)
852 		return err;
853 
854 	return 0;
855 }
856 
857 static int cyber2000fb_set_par(struct fb_info *info)
858 {
859 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
860 	struct fb_var_screeninfo *var = &cfb->fb.var;
861 	struct par_info hw;
862 	unsigned int mem;
863 
864 	hw.width = var->xres_virtual;
865 	hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
866 
867 	switch (var->bits_per_pixel) {
868 	case 8:
869 		hw.co_pixfmt		= CO_PIXFMT_8BPP;
870 		hw.pitch		= hw.width >> 3;
871 		hw.extseqmisc		= EXT_SEQ_MISC_8;
872 		break;
873 
874 	case 16:
875 		hw.co_pixfmt		= CO_PIXFMT_16BPP;
876 		hw.pitch		= hw.width >> 2;
877 
878 		switch (var->green.length) {
879 		case 6: /* RGB565, 64k */
880 			hw.extseqmisc	= EXT_SEQ_MISC_16_RGB565;
881 			break;
882 		case 5: /* RGB555, 32k */
883 			hw.extseqmisc	= EXT_SEQ_MISC_16_RGB555;
884 			break;
885 		case 4: /* RGB444, 4k + transparency? */
886 			hw.extseqmisc	= EXT_SEQ_MISC_16_RGB444;
887 			break;
888 		default:
889 			BUG();
890 		}
891 		break;
892 
893 	case 24:/* TRUECOLOUR, 16m */
894 		hw.co_pixfmt		= CO_PIXFMT_24BPP;
895 		hw.width		*= 3;
896 		hw.pitch		= hw.width >> 3;
897 		hw.ramdac		|= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
898 		hw.extseqmisc		= EXT_SEQ_MISC_24_RGB888;
899 		break;
900 
901 	case 32:/* TRUECOLOUR, 16m */
902 		hw.co_pixfmt		= CO_PIXFMT_32BPP;
903 		hw.pitch		= hw.width >> 1;
904 		hw.ramdac		|= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
905 		hw.extseqmisc		= EXT_SEQ_MISC_32;
906 		break;
907 
908 	default:
909 		BUG();
910 	}
911 
912 	/*
913 	 * Sigh, this is absolutely disgusting, but caused by
914 	 * the way the fbcon developers want to separate out
915 	 * the "checking" and the "setting" of the video mode.
916 	 *
917 	 * If the mode is not suitable for the hardware here,
918 	 * we can't prevent it being set by returning an error.
919 	 *
920 	 * In theory, since NetWinders contain just one VGA card,
921 	 * we should never end up hitting this problem.
922 	 */
923 	BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
924 	BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
925 
926 	hw.width -= 1;
927 	hw.fetch = hw.pitch;
928 	if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
929 		hw.fetch <<= 1;
930 	hw.fetch += 1;
931 
932 	cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
933 
934 	/*
935 	 * Same here - if the size of the video mode exceeds the
936 	 * available RAM, we can't prevent this mode being set.
937 	 *
938 	 * In theory, since NetWinders contain just one VGA card,
939 	 * we should never end up hitting this problem.
940 	 */
941 	mem = cfb->fb.fix.line_length * var->yres_virtual;
942 	BUG_ON(mem > cfb->fb.fix.smem_len);
943 
944 	/*
945 	 * 8bpp displays are always pseudo colour.  16bpp and above
946 	 * are direct colour or true colour, depending on whether
947 	 * the RAMDAC palettes are bypassed.  (Direct colour has
948 	 * palettes, true colour does not.)
949 	 */
950 	if (var->bits_per_pixel == 8)
951 		cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
952 	else if (hw.ramdac & RAMDAC_BYPASS)
953 		cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
954 	else
955 		cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
956 
957 	cyber2000fb_set_timing(cfb, &hw);
958 	cyber2000fb_update_start(cfb, var);
959 
960 	return 0;
961 }
962 
963 /*
964  *    Pan or Wrap the Display
965  */
966 static int
967 cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
968 {
969 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
970 
971 	if (cyber2000fb_update_start(cfb, var))
972 		return -EINVAL;
973 
974 	cfb->fb.var.xoffset = var->xoffset;
975 	cfb->fb.var.yoffset = var->yoffset;
976 
977 	if (var->vmode & FB_VMODE_YWRAP) {
978 		cfb->fb.var.vmode |= FB_VMODE_YWRAP;
979 	} else {
980 		cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
981 	}
982 
983 	return 0;
984 }
985 
986 /*
987  *    (Un)Blank the display.
988  *
989  *  Blank the screen if blank_mode != 0, else unblank. If
990  *  blank == NULL then the caller blanks by setting the CLUT
991  *  (Color Look Up Table) to all black. Return 0 if blanking
992  *  succeeded, != 0 if un-/blanking failed due to e.g. a
993  *  video mode which doesn't support it. Implements VESA
994  *  suspend and powerdown modes on hardware that supports
995  *  disabling hsync/vsync:
996  *    blank_mode == 2: suspend vsync
997  *    blank_mode == 3: suspend hsync
998  *    blank_mode == 4: powerdown
999  *
1000  *  wms...Enable VESA DMPS compatible powerdown mode
1001  *  run "setterm -powersave powerdown" to take advantage
1002  */
1003 static int cyber2000fb_blank(int blank, struct fb_info *info)
1004 {
1005 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
1006 	unsigned int sync = 0;
1007 	int i;
1008 
1009 	switch (blank) {
1010 	case FB_BLANK_POWERDOWN:	/* powerdown - both sync lines down */
1011 		sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
1012 		break;
1013 	case FB_BLANK_HSYNC_SUSPEND:	/* hsync off */
1014 		sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
1015 		break;
1016 	case FB_BLANK_VSYNC_SUSPEND:	/* vsync off */
1017 		sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
1018 		break;
1019 	case FB_BLANK_NORMAL:		/* soft blank */
1020 	default:			/* unblank */
1021 		break;
1022 	}
1023 
1024 	cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
1025 
1026 	if (blank <= 1) {
1027 		/* turn on ramdacs */
1028 		cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1029 					   RAMDAC_RAMPWRDN);
1030 		cyber2000fb_write_ramdac_ctrl(cfb);
1031 	}
1032 
1033 	/*
1034 	 * Soft blank/unblank the display.
1035 	 */
1036 	if (blank) {	/* soft blank */
1037 		for (i = 0; i < NR_PALETTE; i++) {
1038 			cyber2000fb_writeb(i, 0x3c8, cfb);
1039 			cyber2000fb_writeb(0, 0x3c9, cfb);
1040 			cyber2000fb_writeb(0, 0x3c9, cfb);
1041 			cyber2000fb_writeb(0, 0x3c9, cfb);
1042 		}
1043 	} else {	/* unblank */
1044 		for (i = 0; i < NR_PALETTE; i++) {
1045 			cyber2000fb_writeb(i, 0x3c8, cfb);
1046 			cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
1047 			cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
1048 			cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
1049 		}
1050 	}
1051 
1052 	if (blank >= 2) {
1053 		/* turn off ramdacs */
1054 		cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1055 					 RAMDAC_RAMPWRDN;
1056 		cyber2000fb_write_ramdac_ctrl(cfb);
1057 	}
1058 
1059 	return 0;
1060 }
1061 
1062 static const struct fb_ops cyber2000fb_ops = {
1063 	.owner		= THIS_MODULE,
1064 	.fb_check_var	= cyber2000fb_check_var,
1065 	.fb_set_par	= cyber2000fb_set_par,
1066 	.fb_setcolreg	= cyber2000fb_setcolreg,
1067 	.fb_blank	= cyber2000fb_blank,
1068 	.fb_pan_display	= cyber2000fb_pan_display,
1069 	.fb_fillrect	= cyber2000fb_fillrect,
1070 	.fb_copyarea	= cyber2000fb_copyarea,
1071 	.fb_imageblit	= cyber2000fb_imageblit,
1072 	.fb_sync	= cyber2000fb_sync,
1073 };
1074 
1075 /*
1076  * This is the only "static" reference to the internal data structures
1077  * of this driver.  It is here solely at the moment to support the other
1078  * CyberPro modules external to this driver.
1079  */
1080 static struct cfb_info *int_cfb_info;
1081 
1082 /*
1083  * Enable access to the extended registers
1084  */
1085 void cyber2000fb_enable_extregs(struct cfb_info *cfb)
1086 {
1087 	cfb->func_use_count += 1;
1088 
1089 	if (cfb->func_use_count == 1) {
1090 		int old;
1091 
1092 		old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1093 		old |= EXT_FUNC_CTL_EXTREGENBL;
1094 		cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1095 	}
1096 }
1097 EXPORT_SYMBOL(cyber2000fb_enable_extregs);
1098 
1099 /*
1100  * Disable access to the extended registers
1101  */
1102 void cyber2000fb_disable_extregs(struct cfb_info *cfb)
1103 {
1104 	if (cfb->func_use_count == 1) {
1105 		int old;
1106 
1107 		old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1108 		old &= ~EXT_FUNC_CTL_EXTREGENBL;
1109 		cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1110 	}
1111 
1112 	if (cfb->func_use_count == 0)
1113 		printk(KERN_ERR "disable_extregs: count = 0\n");
1114 	else
1115 		cfb->func_use_count -= 1;
1116 }
1117 EXPORT_SYMBOL(cyber2000fb_disable_extregs);
1118 
1119 /*
1120  * Attach a capture/tv driver to the core CyberX0X0 driver.
1121  */
1122 int cyber2000fb_attach(struct cyberpro_info *info, int idx)
1123 {
1124 	if (int_cfb_info != NULL) {
1125 		info->dev	      = int_cfb_info->fb.device;
1126 #ifdef CONFIG_FB_CYBER2000_I2C
1127 		info->i2c	      = &int_cfb_info->i2c_adapter;
1128 #else
1129 		info->i2c	      = NULL;
1130 #endif
1131 		info->regs	      = int_cfb_info->regs;
1132 		info->irq             = int_cfb_info->irq;
1133 		info->fb	      = int_cfb_info->fb.screen_base;
1134 		info->fb_size	      = int_cfb_info->fb.fix.smem_len;
1135 		info->info	      = int_cfb_info;
1136 
1137 		strscpy(info->dev_name, int_cfb_info->fb.fix.id,
1138 			sizeof(info->dev_name));
1139 	}
1140 
1141 	return int_cfb_info != NULL;
1142 }
1143 EXPORT_SYMBOL(cyber2000fb_attach);
1144 
1145 /*
1146  * Detach a capture/tv driver from the core CyberX0X0 driver.
1147  */
1148 void cyber2000fb_detach(int idx)
1149 {
1150 }
1151 EXPORT_SYMBOL(cyber2000fb_detach);
1152 
1153 #ifdef CONFIG_FB_CYBER2000_DDC
1154 
1155 #define DDC_REG		0xb0
1156 #define DDC_SCL_OUT	(1 << 0)
1157 #define DDC_SDA_OUT	(1 << 4)
1158 #define DDC_SCL_IN	(1 << 2)
1159 #define DDC_SDA_IN	(1 << 6)
1160 
1161 static void cyber2000fb_enable_ddc(struct cfb_info *cfb)
1162 	__acquires(&cfb->reg_b0_lock)
1163 {
1164 	spin_lock(&cfb->reg_b0_lock);
1165 	cyber2000fb_writew(0x1bf, 0x3ce, cfb);
1166 }
1167 
1168 static void cyber2000fb_disable_ddc(struct cfb_info *cfb)
1169 	__releases(&cfb->reg_b0_lock)
1170 {
1171 	cyber2000fb_writew(0x0bf, 0x3ce, cfb);
1172 	spin_unlock(&cfb->reg_b0_lock);
1173 }
1174 
1175 
1176 static void cyber2000fb_ddc_setscl(void *data, int val)
1177 {
1178 	struct cfb_info *cfb = data;
1179 	unsigned char reg;
1180 
1181 	cyber2000fb_enable_ddc(cfb);
1182 	reg = cyber2000_grphr(DDC_REG, cfb);
1183 	if (!val)	/* bit is inverted */
1184 		reg |= DDC_SCL_OUT;
1185 	else
1186 		reg &= ~DDC_SCL_OUT;
1187 	cyber2000_grphw(DDC_REG, reg, cfb);
1188 	cyber2000fb_disable_ddc(cfb);
1189 }
1190 
1191 static void cyber2000fb_ddc_setsda(void *data, int val)
1192 {
1193 	struct cfb_info *cfb = data;
1194 	unsigned char reg;
1195 
1196 	cyber2000fb_enable_ddc(cfb);
1197 	reg = cyber2000_grphr(DDC_REG, cfb);
1198 	if (!val)	/* bit is inverted */
1199 		reg |= DDC_SDA_OUT;
1200 	else
1201 		reg &= ~DDC_SDA_OUT;
1202 	cyber2000_grphw(DDC_REG, reg, cfb);
1203 	cyber2000fb_disable_ddc(cfb);
1204 }
1205 
1206 static int cyber2000fb_ddc_getscl(void *data)
1207 {
1208 	struct cfb_info *cfb = data;
1209 	int retval;
1210 
1211 	cyber2000fb_enable_ddc(cfb);
1212 	retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SCL_IN);
1213 	cyber2000fb_disable_ddc(cfb);
1214 
1215 	return retval;
1216 }
1217 
1218 static int cyber2000fb_ddc_getsda(void *data)
1219 {
1220 	struct cfb_info *cfb = data;
1221 	int retval;
1222 
1223 	cyber2000fb_enable_ddc(cfb);
1224 	retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SDA_IN);
1225 	cyber2000fb_disable_ddc(cfb);
1226 
1227 	return retval;
1228 }
1229 
1230 static int cyber2000fb_setup_ddc_bus(struct cfb_info *cfb)
1231 {
1232 	strscpy(cfb->ddc_adapter.name, cfb->fb.fix.id,
1233 		sizeof(cfb->ddc_adapter.name));
1234 	cfb->ddc_adapter.owner		= THIS_MODULE;
1235 	cfb->ddc_adapter.class		= I2C_CLASS_DDC;
1236 	cfb->ddc_adapter.algo_data	= &cfb->ddc_algo;
1237 	cfb->ddc_adapter.dev.parent	= cfb->fb.device;
1238 	cfb->ddc_algo.setsda		= cyber2000fb_ddc_setsda;
1239 	cfb->ddc_algo.setscl		= cyber2000fb_ddc_setscl;
1240 	cfb->ddc_algo.getsda		= cyber2000fb_ddc_getsda;
1241 	cfb->ddc_algo.getscl		= cyber2000fb_ddc_getscl;
1242 	cfb->ddc_algo.udelay		= 10;
1243 	cfb->ddc_algo.timeout		= 20;
1244 	cfb->ddc_algo.data		= cfb;
1245 
1246 	i2c_set_adapdata(&cfb->ddc_adapter, cfb);
1247 
1248 	return i2c_bit_add_bus(&cfb->ddc_adapter);
1249 }
1250 #endif /* CONFIG_FB_CYBER2000_DDC */
1251 
1252 #ifdef CONFIG_FB_CYBER2000_I2C
1253 static void cyber2000fb_i2c_setsda(void *data, int state)
1254 {
1255 	struct cfb_info *cfb = data;
1256 	unsigned int latch2;
1257 
1258 	spin_lock(&cfb->reg_b0_lock);
1259 	latch2 = cyber2000_grphr(EXT_LATCH2, cfb);
1260 	latch2 &= EXT_LATCH2_I2C_CLKEN;
1261 	if (state)
1262 		latch2 |= EXT_LATCH2_I2C_DATEN;
1263 	cyber2000_grphw(EXT_LATCH2, latch2, cfb);
1264 	spin_unlock(&cfb->reg_b0_lock);
1265 }
1266 
1267 static void cyber2000fb_i2c_setscl(void *data, int state)
1268 {
1269 	struct cfb_info *cfb = data;
1270 	unsigned int latch2;
1271 
1272 	spin_lock(&cfb->reg_b0_lock);
1273 	latch2 = cyber2000_grphr(EXT_LATCH2, cfb);
1274 	latch2 &= EXT_LATCH2_I2C_DATEN;
1275 	if (state)
1276 		latch2 |= EXT_LATCH2_I2C_CLKEN;
1277 	cyber2000_grphw(EXT_LATCH2, latch2, cfb);
1278 	spin_unlock(&cfb->reg_b0_lock);
1279 }
1280 
1281 static int cyber2000fb_i2c_getsda(void *data)
1282 {
1283 	struct cfb_info *cfb = data;
1284 	int ret;
1285 
1286 	spin_lock(&cfb->reg_b0_lock);
1287 	ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_DAT);
1288 	spin_unlock(&cfb->reg_b0_lock);
1289 
1290 	return ret;
1291 }
1292 
1293 static int cyber2000fb_i2c_getscl(void *data)
1294 {
1295 	struct cfb_info *cfb = data;
1296 	int ret;
1297 
1298 	spin_lock(&cfb->reg_b0_lock);
1299 	ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_CLK);
1300 	spin_unlock(&cfb->reg_b0_lock);
1301 
1302 	return ret;
1303 }
1304 
1305 static int cyber2000fb_i2c_register(struct cfb_info *cfb)
1306 {
1307 	strscpy(cfb->i2c_adapter.name, cfb->fb.fix.id,
1308 		sizeof(cfb->i2c_adapter.name));
1309 	cfb->i2c_adapter.owner = THIS_MODULE;
1310 	cfb->i2c_adapter.algo_data = &cfb->i2c_algo;
1311 	cfb->i2c_adapter.dev.parent = cfb->fb.device;
1312 	cfb->i2c_algo.setsda = cyber2000fb_i2c_setsda;
1313 	cfb->i2c_algo.setscl = cyber2000fb_i2c_setscl;
1314 	cfb->i2c_algo.getsda = cyber2000fb_i2c_getsda;
1315 	cfb->i2c_algo.getscl = cyber2000fb_i2c_getscl;
1316 	cfb->i2c_algo.udelay = 5;
1317 	cfb->i2c_algo.timeout = msecs_to_jiffies(100);
1318 	cfb->i2c_algo.data = cfb;
1319 
1320 	return i2c_bit_add_bus(&cfb->i2c_adapter);
1321 }
1322 
1323 static void cyber2000fb_i2c_unregister(struct cfb_info *cfb)
1324 {
1325 	i2c_del_adapter(&cfb->i2c_adapter);
1326 }
1327 #else
1328 #define cyber2000fb_i2c_register(cfb)	(0)
1329 #define cyber2000fb_i2c_unregister(cfb)	do { } while (0)
1330 #endif
1331 
1332 /*
1333  * These parameters give
1334  * 640x480, hsync 31.5kHz, vsync 60Hz
1335  */
1336 static const struct fb_videomode cyber2000fb_default_mode = {
1337 	.refresh	= 60,
1338 	.xres		= 640,
1339 	.yres		= 480,
1340 	.pixclock	= 39722,
1341 	.left_margin	= 56,
1342 	.right_margin	= 16,
1343 	.upper_margin	= 34,
1344 	.lower_margin	= 9,
1345 	.hsync_len	= 88,
1346 	.vsync_len	= 2,
1347 	.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
1348 	.vmode		= FB_VMODE_NONINTERLACED
1349 };
1350 
1351 static char igs_regs[] = {
1352 	EXT_CRT_IRQ,		0,
1353 	EXT_CRT_TEST,		0,
1354 	EXT_SYNC_CTL,		0,
1355 	EXT_SEG_WRITE_PTR,	0,
1356 	EXT_SEG_READ_PTR,	0,
1357 	EXT_BIU_MISC,		EXT_BIU_MISC_LIN_ENABLE |
1358 				EXT_BIU_MISC_COP_ENABLE |
1359 				EXT_BIU_MISC_COP_BFC,
1360 	EXT_FUNC_CTL,		0,
1361 	CURS_H_START,		0,
1362 	CURS_H_START + 1,	0,
1363 	CURS_H_PRESET,		0,
1364 	CURS_V_START,		0,
1365 	CURS_V_START + 1,	0,
1366 	CURS_V_PRESET,		0,
1367 	CURS_CTL,		0,
1368 	EXT_ATTRIB_CTL,		EXT_ATTRIB_CTL_EXT,
1369 	EXT_OVERSCAN_RED,	0,
1370 	EXT_OVERSCAN_GREEN,	0,
1371 	EXT_OVERSCAN_BLUE,	0,
1372 
1373 	/* some of these are questionable when we have a BIOS */
1374 	EXT_MEM_CTL0,		EXT_MEM_CTL0_7CLK |
1375 				EXT_MEM_CTL0_RAS_1 |
1376 				EXT_MEM_CTL0_MULTCAS,
1377 	EXT_HIDDEN_CTL1,	0x30,
1378 	EXT_FIFO_CTL,		0x0b,
1379 	EXT_FIFO_CTL + 1,	0x17,
1380 	0x76,			0x00,
1381 	EXT_HIDDEN_CTL4,	0xc8
1382 };
1383 
1384 /*
1385  * Initialise the CyberPro hardware.  On the CyberPro5XXXX,
1386  * ensure that we're using the correct PLL (5XXX's may be
1387  * programmed to use an additional set of PLLs.)
1388  */
1389 static void cyberpro_init_hw(struct cfb_info *cfb)
1390 {
1391 	int i;
1392 
1393 	for (i = 0; i < sizeof(igs_regs); i += 2)
1394 		cyber2000_grphw(igs_regs[i], igs_regs[i + 1], cfb);
1395 
1396 	if (cfb->id == ID_CYBERPRO_5000) {
1397 		unsigned char val;
1398 		cyber2000fb_writeb(0xba, 0x3ce, cfb);
1399 		val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
1400 		cyber2000fb_writeb(val, 0x3cf, cfb);
1401 	}
1402 }
1403 
1404 static struct cfb_info *cyberpro_alloc_fb_info(unsigned int id, char *name)
1405 {
1406 	struct cfb_info *cfb;
1407 
1408 	cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL);
1409 	if (!cfb)
1410 		return NULL;
1411 
1412 
1413 	cfb->id			= id;
1414 
1415 	if (id == ID_CYBERPRO_5000)
1416 		cfb->ref_ps	= 40690; /* 24.576 MHz */
1417 	else
1418 		cfb->ref_ps	= 69842; /* 14.31818 MHz (69841?) */
1419 
1420 	cfb->divisors[0]	= 1;
1421 	cfb->divisors[1]	= 2;
1422 	cfb->divisors[2]	= 4;
1423 
1424 	if (id == ID_CYBERPRO_2000)
1425 		cfb->divisors[3] = 8;
1426 	else
1427 		cfb->divisors[3] = 6;
1428 
1429 	strcpy(cfb->fb.fix.id, name);
1430 
1431 	cfb->fb.fix.type	= FB_TYPE_PACKED_PIXELS;
1432 	cfb->fb.fix.type_aux	= 0;
1433 	cfb->fb.fix.xpanstep	= 0;
1434 	cfb->fb.fix.ypanstep	= 1;
1435 	cfb->fb.fix.ywrapstep	= 0;
1436 
1437 	switch (id) {
1438 	case ID_IGA_1682:
1439 		cfb->fb.fix.accel = 0;
1440 		break;
1441 
1442 	case ID_CYBERPRO_2000:
1443 		cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
1444 		break;
1445 
1446 	case ID_CYBERPRO_2010:
1447 		cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
1448 		break;
1449 
1450 	case ID_CYBERPRO_5000:
1451 		cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
1452 		break;
1453 	}
1454 
1455 	cfb->fb.var.nonstd	= 0;
1456 	cfb->fb.var.activate	= FB_ACTIVATE_NOW;
1457 	cfb->fb.var.height	= -1;
1458 	cfb->fb.var.width	= -1;
1459 	cfb->fb.var.accel_flags	= FB_ACCELF_TEXT;
1460 
1461 	cfb->fb.fbops		= &cyber2000fb_ops;
1462 	cfb->fb.flags		= FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
1463 	cfb->fb.pseudo_palette	= cfb->pseudo_palette;
1464 
1465 	spin_lock_init(&cfb->reg_b0_lock);
1466 
1467 	fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
1468 
1469 	return cfb;
1470 }
1471 
1472 static void cyberpro_free_fb_info(struct cfb_info *cfb)
1473 {
1474 	if (cfb) {
1475 		/*
1476 		 * Free the colourmap
1477 		 */
1478 		fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
1479 
1480 		kfree(cfb);
1481 	}
1482 }
1483 
1484 /*
1485  * Parse Cyber2000fb options.  Usage:
1486  *  video=cyber2000:font:fontname
1487  */
1488 #ifndef MODULE
1489 static int cyber2000fb_setup(char *options)
1490 {
1491 	char *opt;
1492 
1493 	if (!options || !*options)
1494 		return 0;
1495 
1496 	while ((opt = strsep(&options, ",")) != NULL) {
1497 		if (!*opt)
1498 			continue;
1499 
1500 		if (strncmp(opt, "font:", 5) == 0) {
1501 			static char default_font_storage[40];
1502 
1503 			strscpy(default_font_storage, opt + 5,
1504 				sizeof(default_font_storage));
1505 			default_font = default_font_storage;
1506 			continue;
1507 		}
1508 
1509 		printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
1510 	}
1511 	return 0;
1512 }
1513 #endif  /*  MODULE  */
1514 
1515 /*
1516  * The CyberPro chips can be placed on many different bus types.
1517  * This probe function is common to all bus types.  The bus-specific
1518  * probe function is expected to have:
1519  *  - enabled access to the linear memory region
1520  *  - memory mapped access to the registers
1521  *  - initialised mem_ctl1 and mem_ctl2 appropriately.
1522  */
1523 static int cyberpro_common_probe(struct cfb_info *cfb)
1524 {
1525 	u_long smem_size;
1526 	u_int h_sync, v_sync;
1527 	int err;
1528 
1529 	cyberpro_init_hw(cfb);
1530 
1531 	/*
1532 	 * Get the video RAM size and width from the VGA register.
1533 	 * This should have been already initialised by the BIOS,
1534 	 * but if it's garbage, claim default 1MB VRAM (woody)
1535 	 */
1536 	cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
1537 	cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
1538 
1539 	/*
1540 	 * Determine the size of the memory.
1541 	 */
1542 	switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
1543 	case MEM_CTL2_SIZE_4MB:
1544 		smem_size = 0x00400000;
1545 		break;
1546 	case MEM_CTL2_SIZE_2MB:
1547 		smem_size = 0x00200000;
1548 		break;
1549 	case MEM_CTL2_SIZE_1MB:
1550 		smem_size = 0x00100000;
1551 		break;
1552 	default:
1553 		smem_size = 0x00100000;
1554 		break;
1555 	}
1556 
1557 	cfb->fb.fix.smem_len   = smem_size;
1558 	cfb->fb.fix.mmio_len   = MMIO_SIZE;
1559 	cfb->fb.screen_base    = cfb->region;
1560 
1561 #ifdef CONFIG_FB_CYBER2000_DDC
1562 	if (cyber2000fb_setup_ddc_bus(cfb) == 0)
1563 		cfb->ddc_registered = true;
1564 #endif
1565 
1566 	err = -EINVAL;
1567 	if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
1568 			  &cyber2000fb_default_mode, 8)) {
1569 		printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id);
1570 		goto failed;
1571 	}
1572 
1573 	cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
1574 			(cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
1575 
1576 	if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
1577 		cfb->fb.var.yres_virtual = cfb->fb.var.yres;
1578 
1579 /*	fb_set_var(&cfb->fb.var, -1, &cfb->fb); */
1580 
1581 	/*
1582 	 * Calculate the hsync and vsync frequencies.  Note that
1583 	 * we split the 1e12 constant up so that we can preserve
1584 	 * the precision and fit the results into 32-bit registers.
1585 	 *  (1953125000 * 512 = 1e12)
1586 	 */
1587 	h_sync = 1953125000 / cfb->fb.var.pixclock;
1588 	h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
1589 		 cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
1590 	v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
1591 		 cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
1592 
1593 	printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
1594 		cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
1595 		cfb->fb.var.xres, cfb->fb.var.yres,
1596 		h_sync / 1000, h_sync % 1000, v_sync);
1597 
1598 	err = cyber2000fb_i2c_register(cfb);
1599 	if (err)
1600 		goto failed;
1601 
1602 	err = register_framebuffer(&cfb->fb);
1603 	if (err)
1604 		cyber2000fb_i2c_unregister(cfb);
1605 
1606 failed:
1607 #ifdef CONFIG_FB_CYBER2000_DDC
1608 	if (err && cfb->ddc_registered)
1609 		i2c_del_adapter(&cfb->ddc_adapter);
1610 #endif
1611 	return err;
1612 }
1613 
1614 static void cyberpro_common_remove(struct cfb_info *cfb)
1615 {
1616 	unregister_framebuffer(&cfb->fb);
1617 #ifdef CONFIG_FB_CYBER2000_DDC
1618 	if (cfb->ddc_registered)
1619 		i2c_del_adapter(&cfb->ddc_adapter);
1620 #endif
1621 	cyber2000fb_i2c_unregister(cfb);
1622 }
1623 
1624 static void cyberpro_common_resume(struct cfb_info *cfb)
1625 {
1626 	cyberpro_init_hw(cfb);
1627 
1628 	/*
1629 	 * Reprogram the MEM_CTL1 and MEM_CTL2 registers
1630 	 */
1631 	cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
1632 	cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
1633 
1634 	/*
1635 	 * Restore the old video mode and the palette.
1636 	 * We also need to tell fbcon to redraw the console.
1637 	 */
1638 	cyber2000fb_set_par(&cfb->fb);
1639 }
1640 
1641 /*
1642  * We need to wake up the CyberPro, and make sure its in linear memory
1643  * mode.  Unfortunately, this is specific to the platform and card that
1644  * we are running on.
1645  *
1646  * On x86 and ARM, should we be initialising the CyberPro first via the
1647  * IO registers, and then the MMIO registers to catch all cases?  Can we
1648  * end up in the situation where the chip is in MMIO mode, but not awake
1649  * on an x86 system?
1650  */
1651 static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
1652 {
1653 	unsigned char val;
1654 
1655 #if defined(__sparc_v9__)
1656 #error "You lose, consult DaveM."
1657 #elif defined(__sparc__)
1658 	/*
1659 	 * SPARC does not have an "outb" instruction, so we generate
1660 	 * I/O cycles storing into a reserved memory space at
1661 	 * physical address 0x3000000
1662 	 */
1663 	unsigned char __iomem *iop;
1664 
1665 	iop = ioremap(0x3000000, 0x5000);
1666 	if (iop == NULL) {
1667 		printk(KERN_ERR "iga5000: cannot map I/O\n");
1668 		return -ENOMEM;
1669 	}
1670 
1671 	writeb(0x18, iop + 0x46e8);
1672 	writeb(0x01, iop + 0x102);
1673 	writeb(0x08, iop + 0x46e8);
1674 	writeb(EXT_BIU_MISC, iop + 0x3ce);
1675 	writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
1676 
1677 	iounmap(iop);
1678 #else
1679 	/*
1680 	 * Most other machine types are "normal", so
1681 	 * we use the standard IO-based wakeup.
1682 	 */
1683 	outb(0x18, 0x46e8);
1684 	outb(0x01, 0x102);
1685 	outb(0x08, 0x46e8);
1686 	outb(EXT_BIU_MISC, 0x3ce);
1687 	outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
1688 #endif
1689 
1690 	/*
1691 	 * Allow the CyberPro to accept PCI burst accesses
1692 	 */
1693 	if (cfb->id == ID_CYBERPRO_2010) {
1694 		printk(KERN_INFO "%s: NOT enabling PCI bursts\n",
1695 		       cfb->fb.fix.id);
1696 	} else {
1697 		val = cyber2000_grphr(EXT_BUS_CTL, cfb);
1698 		if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
1699 			printk(KERN_INFO "%s: enabling PCI bursts\n",
1700 				cfb->fb.fix.id);
1701 
1702 			val |= EXT_BUS_CTL_PCIBURST_WRITE;
1703 
1704 			if (cfb->id == ID_CYBERPRO_5000)
1705 				val |= EXT_BUS_CTL_PCIBURST_READ;
1706 
1707 			cyber2000_grphw(EXT_BUS_CTL, val, cfb);
1708 		}
1709 	}
1710 
1711 	return 0;
1712 }
1713 
1714 static int cyberpro_pci_probe(struct pci_dev *dev,
1715 			      const struct pci_device_id *id)
1716 {
1717 	struct cfb_info *cfb;
1718 	char name[16];
1719 	int err;
1720 
1721 	sprintf(name, "CyberPro%4X", id->device);
1722 
1723 	err = pci_enable_device(dev);
1724 	if (err)
1725 		return err;
1726 
1727 	err = -ENOMEM;
1728 	cfb = cyberpro_alloc_fb_info(id->driver_data, name);
1729 	if (!cfb)
1730 		goto failed_release;
1731 
1732 	err = pci_request_regions(dev, cfb->fb.fix.id);
1733 	if (err)
1734 		goto failed_regions;
1735 
1736 	cfb->irq = dev->irq;
1737 	cfb->region = pci_ioremap_bar(dev, 0);
1738 	if (!cfb->region) {
1739 		err = -ENOMEM;
1740 		goto failed_ioremap;
1741 	}
1742 
1743 	cfb->regs = cfb->region + MMIO_OFFSET;
1744 	cfb->fb.device = &dev->dev;
1745 	cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
1746 	cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
1747 
1748 	/*
1749 	 * Bring up the hardware.  This is expected to enable access
1750 	 * to the linear memory region, and allow access to the memory
1751 	 * mapped registers.  Also, mem_ctl1 and mem_ctl2 must be
1752 	 * initialised.
1753 	 */
1754 	err = cyberpro_pci_enable_mmio(cfb);
1755 	if (err)
1756 		goto failed;
1757 
1758 	/*
1759 	 * Use MCLK from BIOS. FIXME: what about hotplug?
1760 	 */
1761 	cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
1762 	cfb->mclk_div  = cyber2000_grphr(EXT_MCLK_DIV, cfb);
1763 
1764 #ifdef __arm__
1765 	/*
1766 	 * MCLK on the NetWinder and the Shark is fixed at 75MHz
1767 	 */
1768 	if (machine_is_netwinder()) {
1769 		cfb->mclk_mult = 0xdb;
1770 		cfb->mclk_div  = 0x54;
1771 	}
1772 #endif
1773 
1774 	err = cyberpro_common_probe(cfb);
1775 	if (err)
1776 		goto failed;
1777 
1778 	/*
1779 	 * Our driver data
1780 	 */
1781 	pci_set_drvdata(dev, cfb);
1782 	if (int_cfb_info == NULL)
1783 		int_cfb_info = cfb;
1784 
1785 	return 0;
1786 
1787 failed:
1788 	iounmap(cfb->region);
1789 failed_ioremap:
1790 	pci_release_regions(dev);
1791 failed_regions:
1792 	cyberpro_free_fb_info(cfb);
1793 failed_release:
1794 	return err;
1795 }
1796 
1797 static void cyberpro_pci_remove(struct pci_dev *dev)
1798 {
1799 	struct cfb_info *cfb = pci_get_drvdata(dev);
1800 
1801 	if (cfb) {
1802 		cyberpro_common_remove(cfb);
1803 		iounmap(cfb->region);
1804 		cyberpro_free_fb_info(cfb);
1805 
1806 		if (cfb == int_cfb_info)
1807 			int_cfb_info = NULL;
1808 
1809 		pci_release_regions(dev);
1810 	}
1811 }
1812 
1813 static int __maybe_unused cyberpro_pci_suspend(struct device *dev)
1814 {
1815 	return 0;
1816 }
1817 
1818 /*
1819  * Re-initialise the CyberPro hardware
1820  */
1821 static int __maybe_unused cyberpro_pci_resume(struct device *dev)
1822 {
1823 	struct cfb_info *cfb = dev_get_drvdata(dev);
1824 
1825 	if (cfb) {
1826 		cyberpro_pci_enable_mmio(cfb);
1827 		cyberpro_common_resume(cfb);
1828 	}
1829 
1830 	return 0;
1831 }
1832 
1833 static struct pci_device_id cyberpro_pci_table[] = {
1834 /*	Not yet
1835  *	{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
1836  *		PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
1837  */
1838 	{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
1839 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
1840 	{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
1841 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
1842 	{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
1843 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
1844 	{ 0, }
1845 };
1846 
1847 MODULE_DEVICE_TABLE(pci, cyberpro_pci_table);
1848 
1849 static SIMPLE_DEV_PM_OPS(cyberpro_pci_pm_ops,
1850 			 cyberpro_pci_suspend,
1851 			 cyberpro_pci_resume);
1852 
1853 static struct pci_driver cyberpro_driver = {
1854 	.name		= "CyberPro",
1855 	.probe		= cyberpro_pci_probe,
1856 	.remove		= cyberpro_pci_remove,
1857 	.driver.pm	= &cyberpro_pci_pm_ops,
1858 	.id_table	= cyberpro_pci_table
1859 };
1860 
1861 /*
1862  * I don't think we can use the "module_init" stuff here because
1863  * the fbcon stuff may not be initialised yet.  Hence the #ifdef
1864  * around module_init.
1865  *
1866  * Tony: "module_init" is now required
1867  */
1868 static int __init cyber2000fb_init(void)
1869 {
1870 	int ret = -1, err;
1871 
1872 #ifndef MODULE
1873 	char *option = NULL;
1874 
1875 	if (fb_get_options("cyber2000fb", &option))
1876 		return -ENODEV;
1877 	cyber2000fb_setup(option);
1878 #endif
1879 
1880 	err = pci_register_driver(&cyberpro_driver);
1881 	if (!err)
1882 		ret = 0;
1883 
1884 	return ret ? err : 0;
1885 }
1886 module_init(cyber2000fb_init);
1887 
1888 static void __exit cyberpro_exit(void)
1889 {
1890 	pci_unregister_driver(&cyberpro_driver);
1891 }
1892 module_exit(cyberpro_exit);
1893 
1894 MODULE_AUTHOR("Russell King");
1895 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
1896 MODULE_LICENSE("GPL");
1897