1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * linux/drivers/video/cyber2000fb.c 4 * 5 * Copyright (C) 1998-2002 Russell King 6 * 7 * MIPS and 50xx clock support 8 * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com> 9 * 10 * 32 bit support, text color and panning fixes for modes != 8 bit 11 * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org> 12 * 13 * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device 14 * 15 * Based on cyberfb.c. 16 * 17 * Note that we now use the new fbcon fix, var and cmap scheme. We do 18 * still have to check which console is the currently displayed one 19 * however, especially for the colourmap stuff. 20 * 21 * We also use the new hotplug PCI subsystem. I'm not sure if there 22 * are any such cards, but I'm erring on the side of caution. We don't 23 * want to go pop just because someone does have one. 24 * 25 * Note that this doesn't work fully in the case of multiple CyberPro 26 * cards with grabbers. We currently can only attach to the first 27 * CyberPro card found. 28 * 29 * When we're in truecolour mode, we power down the LUT RAM as a power 30 * saving feature. Also, when we enter any of the powersaving modes 31 * (except soft blanking) we power down the RAMDACs. This saves about 32 * 1W, which is roughly 8% of the power consumption of a NetWinder 33 * (which, incidentally, is about the same saving as a 2.5in hard disk 34 * entering standby mode.) 35 */ 36 #include <linux/module.h> 37 #include <linux/kernel.h> 38 #include <linux/errno.h> 39 #include <linux/string.h> 40 #include <linux/mm.h> 41 #include <linux/slab.h> 42 #include <linux/delay.h> 43 #include <linux/fb.h> 44 #include <linux/pci.h> 45 #include <linux/init.h> 46 #include <linux/io.h> 47 #include <linux/i2c.h> 48 #include <linux/i2c-algo-bit.h> 49 50 51 #ifdef __arm__ 52 #include <asm/mach-types.h> 53 #endif 54 55 #include "cyber2000fb.h" 56 57 struct cfb_info { 58 struct fb_info fb; 59 struct display_switch *dispsw; 60 unsigned char __iomem *region; 61 unsigned char __iomem *regs; 62 u_int id; 63 u_int irq; 64 int func_use_count; 65 u_long ref_ps; 66 67 /* 68 * Clock divisors 69 */ 70 u_int divisors[4]; 71 72 struct { 73 u8 red, green, blue; 74 } palette[NR_PALETTE]; 75 76 u_char mem_ctl1; 77 u_char mem_ctl2; 78 u_char mclk_mult; 79 u_char mclk_div; 80 /* 81 * RAMDAC control register is both of these or'ed together 82 */ 83 u_char ramdac_ctrl; 84 u_char ramdac_powerdown; 85 86 u32 pseudo_palette[16]; 87 88 spinlock_t reg_b0_lock; 89 90 #ifdef CONFIG_FB_CYBER2000_DDC 91 bool ddc_registered; 92 struct i2c_adapter ddc_adapter; 93 struct i2c_algo_bit_data ddc_algo; 94 #endif 95 96 #ifdef CONFIG_FB_CYBER2000_I2C 97 struct i2c_adapter i2c_adapter; 98 struct i2c_algo_bit_data i2c_algo; 99 #endif 100 }; 101 102 static char *default_font = "Acorn8x8"; 103 module_param(default_font, charp, 0); 104 MODULE_PARM_DESC(default_font, "Default font name"); 105 106 /* 107 * Our access methods. 108 */ 109 #define cyber2000fb_writel(val, reg, cfb) writel(val, (cfb)->regs + (reg)) 110 #define cyber2000fb_writew(val, reg, cfb) writew(val, (cfb)->regs + (reg)) 111 #define cyber2000fb_writeb(val, reg, cfb) writeb(val, (cfb)->regs + (reg)) 112 113 #define cyber2000fb_readb(reg, cfb) readb((cfb)->regs + (reg)) 114 115 static inline void 116 cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 117 { 118 cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb); 119 } 120 121 static inline void 122 cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 123 { 124 cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb); 125 } 126 127 static inline unsigned int 128 cyber2000_grphr(unsigned int reg, struct cfb_info *cfb) 129 { 130 cyber2000fb_writeb(reg, 0x3ce, cfb); 131 return cyber2000fb_readb(0x3cf, cfb); 132 } 133 134 static inline void 135 cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 136 { 137 cyber2000fb_readb(0x3da, cfb); 138 cyber2000fb_writeb(reg, 0x3c0, cfb); 139 cyber2000fb_readb(0x3c1, cfb); 140 cyber2000fb_writeb(val, 0x3c0, cfb); 141 } 142 143 static inline void 144 cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 145 { 146 cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb); 147 } 148 149 /* -------------------- Hardware specific routines ------------------------- */ 150 151 /* 152 * Hardware Cyber2000 Acceleration 153 */ 154 static void 155 cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 156 { 157 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 158 unsigned long dst, col; 159 160 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { 161 cfb_fillrect(info, rect); 162 return; 163 } 164 165 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); 166 cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb); 167 cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb); 168 169 col = rect->color; 170 if (cfb->fb.var.bits_per_pixel > 8) 171 col = ((u32 *)cfb->fb.pseudo_palette)[col]; 172 cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb); 173 174 dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual; 175 if (cfb->fb.var.bits_per_pixel == 24) { 176 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); 177 dst *= 3; 178 } 179 180 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); 181 cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); 182 cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb); 183 cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb); 184 } 185 186 static void 187 cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region) 188 { 189 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 190 unsigned int cmd = CO_CMD_L_PATTERN_FGCOL; 191 unsigned long src, dst; 192 193 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { 194 cfb_copyarea(info, region); 195 return; 196 } 197 198 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); 199 cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb); 200 cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb); 201 202 src = region->sx + region->sy * cfb->fb.var.xres_virtual; 203 dst = region->dx + region->dy * cfb->fb.var.xres_virtual; 204 205 if (region->sx < region->dx) { 206 src += region->width - 1; 207 dst += region->width - 1; 208 cmd |= CO_CMD_L_INC_LEFT; 209 } 210 211 if (region->sy < region->dy) { 212 src += (region->height - 1) * cfb->fb.var.xres_virtual; 213 dst += (region->height - 1) * cfb->fb.var.xres_virtual; 214 cmd |= CO_CMD_L_INC_UP; 215 } 216 217 if (cfb->fb.var.bits_per_pixel == 24) { 218 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); 219 src *= 3; 220 dst *= 3; 221 } 222 cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb); 223 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); 224 cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); 225 cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb); 226 cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER, 227 CO_REG_CMD_H, cfb); 228 } 229 230 static void 231 cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image) 232 { 233 cfb_imageblit(info, image); 234 return; 235 } 236 237 static int cyber2000fb_sync(struct fb_info *info) 238 { 239 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 240 int count = 100000; 241 242 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) 243 return 0; 244 245 while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) { 246 if (!count--) { 247 debug_printf("accel_wait timed out\n"); 248 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); 249 break; 250 } 251 udelay(1); 252 } 253 return 0; 254 } 255 256 /* 257 * =========================================================================== 258 */ 259 260 static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf) 261 { 262 u_int mask = (1 << bf->length) - 1; 263 264 return (val >> (16 - bf->length) & mask) << bf->offset; 265 } 266 267 /* 268 * Set a single color register. Return != 0 for invalid regno. 269 */ 270 static int 271 cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 272 u_int transp, struct fb_info *info) 273 { 274 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 275 struct fb_var_screeninfo *var = &cfb->fb.var; 276 u32 pseudo_val; 277 int ret = 1; 278 279 switch (cfb->fb.fix.visual) { 280 default: 281 return 1; 282 283 /* 284 * Pseudocolour: 285 * 8 8 286 * pixel --/--+--/--> red lut --> red dac 287 * | 8 288 * +--/--> green lut --> green dac 289 * | 8 290 * +--/--> blue lut --> blue dac 291 */ 292 case FB_VISUAL_PSEUDOCOLOR: 293 if (regno >= NR_PALETTE) 294 return 1; 295 296 red >>= 8; 297 green >>= 8; 298 blue >>= 8; 299 300 cfb->palette[regno].red = red; 301 cfb->palette[regno].green = green; 302 cfb->palette[regno].blue = blue; 303 304 cyber2000fb_writeb(regno, 0x3c8, cfb); 305 cyber2000fb_writeb(red, 0x3c9, cfb); 306 cyber2000fb_writeb(green, 0x3c9, cfb); 307 cyber2000fb_writeb(blue, 0x3c9, cfb); 308 return 0; 309 310 /* 311 * Direct colour: 312 * n rl 313 * pixel --/--+--/--> red lut --> red dac 314 * | gl 315 * +--/--> green lut --> green dac 316 * | bl 317 * +--/--> blue lut --> blue dac 318 * n = bpp, rl = red length, gl = green length, bl = blue length 319 */ 320 case FB_VISUAL_DIRECTCOLOR: 321 red >>= 8; 322 green >>= 8; 323 blue >>= 8; 324 325 if (var->green.length == 6 && regno < 64) { 326 cfb->palette[regno << 2].green = green; 327 328 /* 329 * The 6 bits of the green component are applied 330 * to the high 6 bits of the LUT. 331 */ 332 cyber2000fb_writeb(regno << 2, 0x3c8, cfb); 333 cyber2000fb_writeb(cfb->palette[regno >> 1].red, 334 0x3c9, cfb); 335 cyber2000fb_writeb(green, 0x3c9, cfb); 336 cyber2000fb_writeb(cfb->palette[regno >> 1].blue, 337 0x3c9, cfb); 338 339 green = cfb->palette[regno << 3].green; 340 341 ret = 0; 342 } 343 344 if (var->green.length >= 5 && regno < 32) { 345 cfb->palette[regno << 3].red = red; 346 cfb->palette[regno << 3].green = green; 347 cfb->palette[regno << 3].blue = blue; 348 349 /* 350 * The 5 bits of each colour component are 351 * applied to the high 5 bits of the LUT. 352 */ 353 cyber2000fb_writeb(regno << 3, 0x3c8, cfb); 354 cyber2000fb_writeb(red, 0x3c9, cfb); 355 cyber2000fb_writeb(green, 0x3c9, cfb); 356 cyber2000fb_writeb(blue, 0x3c9, cfb); 357 ret = 0; 358 } 359 360 if (var->green.length == 4 && regno < 16) { 361 cfb->palette[regno << 4].red = red; 362 cfb->palette[regno << 4].green = green; 363 cfb->palette[regno << 4].blue = blue; 364 365 /* 366 * The 5 bits of each colour component are 367 * applied to the high 5 bits of the LUT. 368 */ 369 cyber2000fb_writeb(regno << 4, 0x3c8, cfb); 370 cyber2000fb_writeb(red, 0x3c9, cfb); 371 cyber2000fb_writeb(green, 0x3c9, cfb); 372 cyber2000fb_writeb(blue, 0x3c9, cfb); 373 ret = 0; 374 } 375 376 /* 377 * Since this is only used for the first 16 colours, we 378 * don't have to care about overflowing for regno >= 32 379 */ 380 pseudo_val = regno << var->red.offset | 381 regno << var->green.offset | 382 regno << var->blue.offset; 383 break; 384 385 /* 386 * True colour: 387 * n rl 388 * pixel --/--+--/--> red dac 389 * | gl 390 * +--/--> green dac 391 * | bl 392 * +--/--> blue dac 393 * n = bpp, rl = red length, gl = green length, bl = blue length 394 */ 395 case FB_VISUAL_TRUECOLOR: 396 pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp); 397 pseudo_val |= convert_bitfield(red, &var->red); 398 pseudo_val |= convert_bitfield(green, &var->green); 399 pseudo_val |= convert_bitfield(blue, &var->blue); 400 ret = 0; 401 break; 402 } 403 404 /* 405 * Now set our pseudo palette for the CFB16/24/32 drivers. 406 */ 407 if (regno < 16) 408 ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val; 409 410 return ret; 411 } 412 413 struct par_info { 414 /* 415 * Hardware 416 */ 417 u_char clock_mult; 418 u_char clock_div; 419 u_char extseqmisc; 420 u_char co_pixfmt; 421 u_char crtc_ofl; 422 u_char crtc[19]; 423 u_int width; 424 u_int pitch; 425 u_int fetch; 426 427 /* 428 * Other 429 */ 430 u_char ramdac; 431 }; 432 433 static const u_char crtc_idx[] = { 434 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 435 0x08, 0x09, 436 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18 437 }; 438 439 static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb) 440 { 441 unsigned int i; 442 unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown; 443 444 cyber2000fb_writeb(0x56, 0x3ce, cfb); 445 i = cyber2000fb_readb(0x3cf, cfb); 446 cyber2000fb_writeb(i | 4, 0x3cf, cfb); 447 cyber2000fb_writeb(val, 0x3c6, cfb); 448 cyber2000fb_writeb(i, 0x3cf, cfb); 449 /* prevent card lock-up observed on x86 with CyberPro 2000 */ 450 cyber2000fb_readb(0x3cf, cfb); 451 } 452 453 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw) 454 { 455 u_int i; 456 457 /* 458 * Blank palette 459 */ 460 for (i = 0; i < NR_PALETTE; i++) { 461 cyber2000fb_writeb(i, 0x3c8, cfb); 462 cyber2000fb_writeb(0, 0x3c9, cfb); 463 cyber2000fb_writeb(0, 0x3c9, cfb); 464 cyber2000fb_writeb(0, 0x3c9, cfb); 465 } 466 467 cyber2000fb_writeb(0xef, 0x3c2, cfb); 468 cyber2000_crtcw(0x11, 0x0b, cfb); 469 cyber2000_attrw(0x11, 0x00, cfb); 470 471 cyber2000_seqw(0x00, 0x01, cfb); 472 cyber2000_seqw(0x01, 0x01, cfb); 473 cyber2000_seqw(0x02, 0x0f, cfb); 474 cyber2000_seqw(0x03, 0x00, cfb); 475 cyber2000_seqw(0x04, 0x0e, cfb); 476 cyber2000_seqw(0x00, 0x03, cfb); 477 478 for (i = 0; i < sizeof(crtc_idx); i++) 479 cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb); 480 481 for (i = 0x0a; i < 0x10; i++) 482 cyber2000_crtcw(i, 0, cfb); 483 484 cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb); 485 cyber2000_grphw(0x00, 0x00, cfb); 486 cyber2000_grphw(0x01, 0x00, cfb); 487 cyber2000_grphw(0x02, 0x00, cfb); 488 cyber2000_grphw(0x03, 0x00, cfb); 489 cyber2000_grphw(0x04, 0x00, cfb); 490 cyber2000_grphw(0x05, 0x60, cfb); 491 cyber2000_grphw(0x06, 0x05, cfb); 492 cyber2000_grphw(0x07, 0x0f, cfb); 493 cyber2000_grphw(0x08, 0xff, cfb); 494 495 /* Attribute controller registers */ 496 for (i = 0; i < 16; i++) 497 cyber2000_attrw(i, i, cfb); 498 499 cyber2000_attrw(0x10, 0x01, cfb); 500 cyber2000_attrw(0x11, 0x00, cfb); 501 cyber2000_attrw(0x12, 0x0f, cfb); 502 cyber2000_attrw(0x13, 0x00, cfb); 503 cyber2000_attrw(0x14, 0x00, cfb); 504 505 /* PLL registers */ 506 spin_lock(&cfb->reg_b0_lock); 507 cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb); 508 cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb); 509 cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb); 510 cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb); 511 cyber2000_grphw(0x90, 0x01, cfb); 512 cyber2000_grphw(0xb9, 0x80, cfb); 513 cyber2000_grphw(0xb9, 0x00, cfb); 514 spin_unlock(&cfb->reg_b0_lock); 515 516 cfb->ramdac_ctrl = hw->ramdac; 517 cyber2000fb_write_ramdac_ctrl(cfb); 518 519 cyber2000fb_writeb(0x20, 0x3c0, cfb); 520 cyber2000fb_writeb(0xff, 0x3c6, cfb); 521 522 cyber2000_grphw(0x14, hw->fetch, cfb); 523 cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) | 524 ((hw->pitch >> 4) & 0x30), cfb); 525 cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb); 526 527 /* 528 * Set up accelerator registers 529 */ 530 cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb); 531 cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb); 532 cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb); 533 } 534 535 static inline int 536 cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var) 537 { 538 u_int base = var->yoffset * var->xres_virtual + var->xoffset; 539 540 base *= var->bits_per_pixel; 541 542 /* 543 * Convert to bytes and shift two extra bits because DAC 544 * can only start on 4 byte aligned data. 545 */ 546 base >>= 5; 547 548 if (base >= 1 << 20) 549 return -EINVAL; 550 551 cyber2000_grphw(0x10, base >> 16 | 0x10, cfb); 552 cyber2000_crtcw(0x0c, base >> 8, cfb); 553 cyber2000_crtcw(0x0d, base, cfb); 554 555 return 0; 556 } 557 558 static int 559 cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb, 560 struct fb_var_screeninfo *var) 561 { 562 u_int Htotal, Hblankend, Hsyncend; 563 u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend; 564 #define ENCODE_BIT(v, b1, m, b2) ((((v) >> (b1)) & (m)) << (b2)) 565 566 hw->crtc[13] = hw->pitch; 567 hw->crtc[17] = 0xe3; 568 hw->crtc[14] = 0; 569 hw->crtc[8] = 0; 570 571 Htotal = var->xres + var->right_margin + 572 var->hsync_len + var->left_margin; 573 574 if (Htotal > 2080) 575 return -EINVAL; 576 577 hw->crtc[0] = (Htotal >> 3) - 5; 578 hw->crtc[1] = (var->xres >> 3) - 1; 579 hw->crtc[2] = var->xres >> 3; 580 hw->crtc[4] = (var->xres + var->right_margin) >> 3; 581 582 Hblankend = (Htotal - 4 * 8) >> 3; 583 584 hw->crtc[3] = ENCODE_BIT(Hblankend, 0, 0x1f, 0) | 585 ENCODE_BIT(1, 0, 0x01, 7); 586 587 Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3; 588 589 hw->crtc[5] = ENCODE_BIT(Hsyncend, 0, 0x1f, 0) | 590 ENCODE_BIT(Hblankend, 5, 0x01, 7); 591 592 Vdispend = var->yres - 1; 593 Vsyncstart = var->yres + var->lower_margin; 594 Vsyncend = var->yres + var->lower_margin + var->vsync_len; 595 Vtotal = var->yres + var->lower_margin + var->vsync_len + 596 var->upper_margin - 2; 597 598 if (Vtotal > 2047) 599 return -EINVAL; 600 601 Vblankstart = var->yres + 6; 602 Vblankend = Vtotal - 10; 603 604 hw->crtc[6] = Vtotal; 605 hw->crtc[7] = ENCODE_BIT(Vtotal, 8, 0x01, 0) | 606 ENCODE_BIT(Vdispend, 8, 0x01, 1) | 607 ENCODE_BIT(Vsyncstart, 8, 0x01, 2) | 608 ENCODE_BIT(Vblankstart, 8, 0x01, 3) | 609 ENCODE_BIT(1, 0, 0x01, 4) | 610 ENCODE_BIT(Vtotal, 9, 0x01, 5) | 611 ENCODE_BIT(Vdispend, 9, 0x01, 6) | 612 ENCODE_BIT(Vsyncstart, 9, 0x01, 7); 613 hw->crtc[9] = ENCODE_BIT(0, 0, 0x1f, 0) | 614 ENCODE_BIT(Vblankstart, 9, 0x01, 5) | 615 ENCODE_BIT(1, 0, 0x01, 6); 616 hw->crtc[10] = Vsyncstart; 617 hw->crtc[11] = ENCODE_BIT(Vsyncend, 0, 0x0f, 0) | 618 ENCODE_BIT(1, 0, 0x01, 7); 619 hw->crtc[12] = Vdispend; 620 hw->crtc[15] = Vblankstart; 621 hw->crtc[16] = Vblankend; 622 hw->crtc[18] = 0xff; 623 624 /* 625 * overflow - graphics reg 0x11 626 * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10 627 * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT 628 */ 629 hw->crtc_ofl = 630 ENCODE_BIT(Vtotal, 10, 0x01, 0) | 631 ENCODE_BIT(Vdispend, 10, 0x01, 1) | 632 ENCODE_BIT(Vsyncstart, 10, 0x01, 2) | 633 ENCODE_BIT(Vblankstart, 10, 0x01, 3) | 634 EXT_CRT_VRTOFL_LINECOMP10; 635 636 /* woody: set the interlaced bit... */ 637 /* FIXME: what about doublescan? */ 638 if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) 639 hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE; 640 641 return 0; 642 } 643 644 /* 645 * The following was discovered by a good monitor, bit twiddling, theorising 646 * and but mostly luck. Strangely, it looks like everyone elses' PLL! 647 * 648 * Clock registers: 649 * fclock = fpll / div2 650 * fpll = fref * mult / div1 651 * where: 652 * fref = 14.318MHz (69842ps) 653 * mult = reg0xb0.7:0 654 * div1 = (reg0xb1.5:0 + 1) 655 * div2 = 2^(reg0xb1.7:6) 656 * fpll should be between 115 and 260 MHz 657 * (8696ps and 3846ps) 658 */ 659 static int 660 cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb, 661 struct fb_var_screeninfo *var) 662 { 663 u_long pll_ps = var->pixclock; 664 const u_long ref_ps = cfb->ref_ps; 665 u_int div2, t_div1, best_div1, best_mult; 666 int best_diff; 667 int vco; 668 669 /* 670 * Step 1: 671 * find div2 such that 115MHz < fpll < 260MHz 672 * and 0 <= div2 < 4 673 */ 674 for (div2 = 0; div2 < 4; div2++) { 675 u_long new_pll; 676 677 new_pll = pll_ps / cfb->divisors[div2]; 678 if (8696 > new_pll && new_pll > 3846) { 679 pll_ps = new_pll; 680 break; 681 } 682 } 683 684 if (div2 == 4) 685 return -EINVAL; 686 687 /* 688 * Step 2: 689 * Given pll_ps and ref_ps, find: 690 * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005 691 * where { 1 < best_div1 < 32, 1 < best_mult < 256 } 692 * pll_ps_calc = best_div1 / (ref_ps * best_mult) 693 */ 694 best_diff = 0x7fffffff; 695 best_mult = 2; 696 best_div1 = 32; 697 for (t_div1 = 2; t_div1 < 32; t_div1 += 1) { 698 u_int rr, t_mult, t_pll_ps; 699 int diff; 700 701 /* 702 * Find the multiplier for this divisor 703 */ 704 rr = ref_ps * t_div1; 705 t_mult = (rr + pll_ps / 2) / pll_ps; 706 707 /* 708 * Is the multiplier within the correct range? 709 */ 710 if (t_mult > 256 || t_mult < 2) 711 continue; 712 713 /* 714 * Calculate the actual clock period from this multiplier 715 * and divisor, and estimate the error. 716 */ 717 t_pll_ps = (rr + t_mult / 2) / t_mult; 718 diff = pll_ps - t_pll_ps; 719 if (diff < 0) 720 diff = -diff; 721 722 if (diff < best_diff) { 723 best_diff = diff; 724 best_mult = t_mult; 725 best_div1 = t_div1; 726 } 727 728 /* 729 * If we hit an exact value, there is no point in continuing. 730 */ 731 if (diff == 0) 732 break; 733 } 734 735 /* 736 * Step 3: 737 * combine values 738 */ 739 hw->clock_mult = best_mult - 1; 740 hw->clock_div = div2 << 6 | (best_div1 - 1); 741 742 vco = ref_ps * best_div1 / best_mult; 743 if ((ref_ps == 40690) && (vco < 5556)) 744 /* Set VFSEL when VCO > 180MHz (5.556 ps). */ 745 hw->clock_div |= EXT_DCLK_DIV_VFSEL; 746 747 return 0; 748 } 749 750 /* 751 * Set the User Defined Part of the Display 752 */ 753 static int 754 cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) 755 { 756 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 757 struct par_info hw; 758 unsigned int mem; 759 int err; 760 761 var->transp.msb_right = 0; 762 var->red.msb_right = 0; 763 var->green.msb_right = 0; 764 var->blue.msb_right = 0; 765 var->transp.offset = 0; 766 var->transp.length = 0; 767 768 switch (var->bits_per_pixel) { 769 case 8: /* PSEUDOCOLOUR, 256 */ 770 var->red.offset = 0; 771 var->red.length = 8; 772 var->green.offset = 0; 773 var->green.length = 8; 774 var->blue.offset = 0; 775 var->blue.length = 8; 776 break; 777 778 case 16:/* DIRECTCOLOUR, 64k or 32k */ 779 switch (var->green.length) { 780 case 6: /* RGB565, 64k */ 781 var->red.offset = 11; 782 var->red.length = 5; 783 var->green.offset = 5; 784 var->green.length = 6; 785 var->blue.offset = 0; 786 var->blue.length = 5; 787 break; 788 789 default: 790 case 5: /* RGB555, 32k */ 791 var->red.offset = 10; 792 var->red.length = 5; 793 var->green.offset = 5; 794 var->green.length = 5; 795 var->blue.offset = 0; 796 var->blue.length = 5; 797 break; 798 799 case 4: /* RGB444, 4k + transparency? */ 800 var->transp.offset = 12; 801 var->transp.length = 4; 802 var->red.offset = 8; 803 var->red.length = 4; 804 var->green.offset = 4; 805 var->green.length = 4; 806 var->blue.offset = 0; 807 var->blue.length = 4; 808 break; 809 } 810 break; 811 812 case 24:/* TRUECOLOUR, 16m */ 813 var->red.offset = 16; 814 var->red.length = 8; 815 var->green.offset = 8; 816 var->green.length = 8; 817 var->blue.offset = 0; 818 var->blue.length = 8; 819 break; 820 821 case 32:/* TRUECOLOUR, 16m */ 822 var->transp.offset = 24; 823 var->transp.length = 8; 824 var->red.offset = 16; 825 var->red.length = 8; 826 var->green.offset = 8; 827 var->green.length = 8; 828 var->blue.offset = 0; 829 var->blue.length = 8; 830 break; 831 832 default: 833 return -EINVAL; 834 } 835 836 mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8); 837 if (mem > cfb->fb.fix.smem_len) 838 var->yres_virtual = cfb->fb.fix.smem_len * 8 / 839 (var->bits_per_pixel * var->xres_virtual); 840 841 if (var->yres > var->yres_virtual) 842 var->yres = var->yres_virtual; 843 if (var->xres > var->xres_virtual) 844 var->xres = var->xres_virtual; 845 846 err = cyber2000fb_decode_clock(&hw, cfb, var); 847 if (err) 848 return err; 849 850 err = cyber2000fb_decode_crtc(&hw, cfb, var); 851 if (err) 852 return err; 853 854 return 0; 855 } 856 857 static int cyber2000fb_set_par(struct fb_info *info) 858 { 859 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 860 struct fb_var_screeninfo *var = &cfb->fb.var; 861 struct par_info hw; 862 unsigned int mem; 863 864 hw.width = var->xres_virtual; 865 hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT; 866 867 switch (var->bits_per_pixel) { 868 case 8: 869 hw.co_pixfmt = CO_PIXFMT_8BPP; 870 hw.pitch = hw.width >> 3; 871 hw.extseqmisc = EXT_SEQ_MISC_8; 872 break; 873 874 case 16: 875 hw.co_pixfmt = CO_PIXFMT_16BPP; 876 hw.pitch = hw.width >> 2; 877 878 switch (var->green.length) { 879 case 6: /* RGB565, 64k */ 880 hw.extseqmisc = EXT_SEQ_MISC_16_RGB565; 881 break; 882 case 5: /* RGB555, 32k */ 883 hw.extseqmisc = EXT_SEQ_MISC_16_RGB555; 884 break; 885 case 4: /* RGB444, 4k + transparency? */ 886 hw.extseqmisc = EXT_SEQ_MISC_16_RGB444; 887 break; 888 default: 889 BUG(); 890 } 891 break; 892 893 case 24:/* TRUECOLOUR, 16m */ 894 hw.co_pixfmt = CO_PIXFMT_24BPP; 895 hw.width *= 3; 896 hw.pitch = hw.width >> 3; 897 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); 898 hw.extseqmisc = EXT_SEQ_MISC_24_RGB888; 899 break; 900 901 case 32:/* TRUECOLOUR, 16m */ 902 hw.co_pixfmt = CO_PIXFMT_32BPP; 903 hw.pitch = hw.width >> 1; 904 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); 905 hw.extseqmisc = EXT_SEQ_MISC_32; 906 break; 907 908 default: 909 BUG(); 910 } 911 912 /* 913 * Sigh, this is absolutely disgusting, but caused by 914 * the way the fbcon developers want to separate out 915 * the "checking" and the "setting" of the video mode. 916 * 917 * If the mode is not suitable for the hardware here, 918 * we can't prevent it being set by returning an error. 919 * 920 * In theory, since NetWinders contain just one VGA card, 921 * we should never end up hitting this problem. 922 */ 923 BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0); 924 BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0); 925 926 hw.width -= 1; 927 hw.fetch = hw.pitch; 928 if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT)) 929 hw.fetch <<= 1; 930 hw.fetch += 1; 931 932 cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; 933 934 /* 935 * Same here - if the size of the video mode exceeds the 936 * available RAM, we can't prevent this mode being set. 937 * 938 * In theory, since NetWinders contain just one VGA card, 939 * we should never end up hitting this problem. 940 */ 941 mem = cfb->fb.fix.line_length * var->yres_virtual; 942 BUG_ON(mem > cfb->fb.fix.smem_len); 943 944 /* 945 * 8bpp displays are always pseudo colour. 16bpp and above 946 * are direct colour or true colour, depending on whether 947 * the RAMDAC palettes are bypassed. (Direct colour has 948 * palettes, true colour does not.) 949 */ 950 if (var->bits_per_pixel == 8) 951 cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; 952 else if (hw.ramdac & RAMDAC_BYPASS) 953 cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; 954 else 955 cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR; 956 957 cyber2000fb_set_timing(cfb, &hw); 958 cyber2000fb_update_start(cfb, var); 959 960 return 0; 961 } 962 963 /* 964 * Pan or Wrap the Display 965 */ 966 static int 967 cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) 968 { 969 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 970 971 if (cyber2000fb_update_start(cfb, var)) 972 return -EINVAL; 973 974 cfb->fb.var.xoffset = var->xoffset; 975 cfb->fb.var.yoffset = var->yoffset; 976 977 if (var->vmode & FB_VMODE_YWRAP) { 978 cfb->fb.var.vmode |= FB_VMODE_YWRAP; 979 } else { 980 cfb->fb.var.vmode &= ~FB_VMODE_YWRAP; 981 } 982 983 return 0; 984 } 985 986 /* 987 * (Un)Blank the display. 988 * 989 * Blank the screen if blank_mode != 0, else unblank. If 990 * blank == NULL then the caller blanks by setting the CLUT 991 * (Color Look Up Table) to all black. Return 0 if blanking 992 * succeeded, != 0 if un-/blanking failed due to e.g. a 993 * video mode which doesn't support it. Implements VESA 994 * suspend and powerdown modes on hardware that supports 995 * disabling hsync/vsync: 996 * blank_mode == 2: suspend vsync 997 * blank_mode == 3: suspend hsync 998 * blank_mode == 4: powerdown 999 * 1000 * wms...Enable VESA DMPS compatible powerdown mode 1001 * run "setterm -powersave powerdown" to take advantage 1002 */ 1003 static int cyber2000fb_blank(int blank, struct fb_info *info) 1004 { 1005 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 1006 unsigned int sync = 0; 1007 int i; 1008 1009 switch (blank) { 1010 case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */ 1011 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0; 1012 break; 1013 case FB_BLANK_HSYNC_SUSPEND: /* hsync off */ 1014 sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0; 1015 break; 1016 case FB_BLANK_VSYNC_SUSPEND: /* vsync off */ 1017 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL; 1018 break; 1019 case FB_BLANK_NORMAL: /* soft blank */ 1020 default: /* unblank */ 1021 break; 1022 } 1023 1024 cyber2000_grphw(EXT_SYNC_CTL, sync, cfb); 1025 1026 if (blank <= 1) { 1027 /* turn on ramdacs */ 1028 cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | 1029 RAMDAC_RAMPWRDN); 1030 cyber2000fb_write_ramdac_ctrl(cfb); 1031 } 1032 1033 /* 1034 * Soft blank/unblank the display. 1035 */ 1036 if (blank) { /* soft blank */ 1037 for (i = 0; i < NR_PALETTE; i++) { 1038 cyber2000fb_writeb(i, 0x3c8, cfb); 1039 cyber2000fb_writeb(0, 0x3c9, cfb); 1040 cyber2000fb_writeb(0, 0x3c9, cfb); 1041 cyber2000fb_writeb(0, 0x3c9, cfb); 1042 } 1043 } else { /* unblank */ 1044 for (i = 0; i < NR_PALETTE; i++) { 1045 cyber2000fb_writeb(i, 0x3c8, cfb); 1046 cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb); 1047 cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb); 1048 cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb); 1049 } 1050 } 1051 1052 if (blank >= 2) { 1053 /* turn off ramdacs */ 1054 cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | 1055 RAMDAC_RAMPWRDN; 1056 cyber2000fb_write_ramdac_ctrl(cfb); 1057 } 1058 1059 return 0; 1060 } 1061 1062 static const struct fb_ops cyber2000fb_ops = { 1063 .owner = THIS_MODULE, 1064 .fb_check_var = cyber2000fb_check_var, 1065 .fb_set_par = cyber2000fb_set_par, 1066 .fb_setcolreg = cyber2000fb_setcolreg, 1067 .fb_blank = cyber2000fb_blank, 1068 .fb_pan_display = cyber2000fb_pan_display, 1069 .fb_fillrect = cyber2000fb_fillrect, 1070 .fb_copyarea = cyber2000fb_copyarea, 1071 .fb_imageblit = cyber2000fb_imageblit, 1072 .fb_sync = cyber2000fb_sync, 1073 }; 1074 1075 /* 1076 * This is the only "static" reference to the internal data structures 1077 * of this driver. It is here solely at the moment to support the other 1078 * CyberPro modules external to this driver. 1079 */ 1080 static struct cfb_info *int_cfb_info; 1081 1082 /* 1083 * Enable access to the extended registers 1084 */ 1085 void cyber2000fb_enable_extregs(struct cfb_info *cfb) 1086 { 1087 cfb->func_use_count += 1; 1088 1089 if (cfb->func_use_count == 1) { 1090 int old; 1091 1092 old = cyber2000_grphr(EXT_FUNC_CTL, cfb); 1093 old |= EXT_FUNC_CTL_EXTREGENBL; 1094 cyber2000_grphw(EXT_FUNC_CTL, old, cfb); 1095 } 1096 } 1097 EXPORT_SYMBOL(cyber2000fb_enable_extregs); 1098 1099 /* 1100 * Disable access to the extended registers 1101 */ 1102 void cyber2000fb_disable_extregs(struct cfb_info *cfb) 1103 { 1104 if (cfb->func_use_count == 1) { 1105 int old; 1106 1107 old = cyber2000_grphr(EXT_FUNC_CTL, cfb); 1108 old &= ~EXT_FUNC_CTL_EXTREGENBL; 1109 cyber2000_grphw(EXT_FUNC_CTL, old, cfb); 1110 } 1111 1112 if (cfb->func_use_count == 0) 1113 printk(KERN_ERR "disable_extregs: count = 0\n"); 1114 else 1115 cfb->func_use_count -= 1; 1116 } 1117 EXPORT_SYMBOL(cyber2000fb_disable_extregs); 1118 1119 /* 1120 * Attach a capture/tv driver to the core CyberX0X0 driver. 1121 */ 1122 int cyber2000fb_attach(struct cyberpro_info *info, int idx) 1123 { 1124 if (int_cfb_info != NULL) { 1125 info->dev = int_cfb_info->fb.device; 1126 #ifdef CONFIG_FB_CYBER2000_I2C 1127 info->i2c = &int_cfb_info->i2c_adapter; 1128 #else 1129 info->i2c = NULL; 1130 #endif 1131 info->regs = int_cfb_info->regs; 1132 info->irq = int_cfb_info->irq; 1133 info->fb = int_cfb_info->fb.screen_base; 1134 info->fb_size = int_cfb_info->fb.fix.smem_len; 1135 info->info = int_cfb_info; 1136 1137 strlcpy(info->dev_name, int_cfb_info->fb.fix.id, 1138 sizeof(info->dev_name)); 1139 } 1140 1141 return int_cfb_info != NULL; 1142 } 1143 EXPORT_SYMBOL(cyber2000fb_attach); 1144 1145 /* 1146 * Detach a capture/tv driver from the core CyberX0X0 driver. 1147 */ 1148 void cyber2000fb_detach(int idx) 1149 { 1150 } 1151 EXPORT_SYMBOL(cyber2000fb_detach); 1152 1153 #ifdef CONFIG_FB_CYBER2000_DDC 1154 1155 #define DDC_REG 0xb0 1156 #define DDC_SCL_OUT (1 << 0) 1157 #define DDC_SDA_OUT (1 << 4) 1158 #define DDC_SCL_IN (1 << 2) 1159 #define DDC_SDA_IN (1 << 6) 1160 1161 static void cyber2000fb_enable_ddc(struct cfb_info *cfb) 1162 __acquires(&cfb->reg_b0_lock) 1163 { 1164 spin_lock(&cfb->reg_b0_lock); 1165 cyber2000fb_writew(0x1bf, 0x3ce, cfb); 1166 } 1167 1168 static void cyber2000fb_disable_ddc(struct cfb_info *cfb) 1169 __releases(&cfb->reg_b0_lock) 1170 { 1171 cyber2000fb_writew(0x0bf, 0x3ce, cfb); 1172 spin_unlock(&cfb->reg_b0_lock); 1173 } 1174 1175 1176 static void cyber2000fb_ddc_setscl(void *data, int val) 1177 { 1178 struct cfb_info *cfb = data; 1179 unsigned char reg; 1180 1181 cyber2000fb_enable_ddc(cfb); 1182 reg = cyber2000_grphr(DDC_REG, cfb); 1183 if (!val) /* bit is inverted */ 1184 reg |= DDC_SCL_OUT; 1185 else 1186 reg &= ~DDC_SCL_OUT; 1187 cyber2000_grphw(DDC_REG, reg, cfb); 1188 cyber2000fb_disable_ddc(cfb); 1189 } 1190 1191 static void cyber2000fb_ddc_setsda(void *data, int val) 1192 { 1193 struct cfb_info *cfb = data; 1194 unsigned char reg; 1195 1196 cyber2000fb_enable_ddc(cfb); 1197 reg = cyber2000_grphr(DDC_REG, cfb); 1198 if (!val) /* bit is inverted */ 1199 reg |= DDC_SDA_OUT; 1200 else 1201 reg &= ~DDC_SDA_OUT; 1202 cyber2000_grphw(DDC_REG, reg, cfb); 1203 cyber2000fb_disable_ddc(cfb); 1204 } 1205 1206 static int cyber2000fb_ddc_getscl(void *data) 1207 { 1208 struct cfb_info *cfb = data; 1209 int retval; 1210 1211 cyber2000fb_enable_ddc(cfb); 1212 retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SCL_IN); 1213 cyber2000fb_disable_ddc(cfb); 1214 1215 return retval; 1216 } 1217 1218 static int cyber2000fb_ddc_getsda(void *data) 1219 { 1220 struct cfb_info *cfb = data; 1221 int retval; 1222 1223 cyber2000fb_enable_ddc(cfb); 1224 retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SDA_IN); 1225 cyber2000fb_disable_ddc(cfb); 1226 1227 return retval; 1228 } 1229 1230 static int cyber2000fb_setup_ddc_bus(struct cfb_info *cfb) 1231 { 1232 strlcpy(cfb->ddc_adapter.name, cfb->fb.fix.id, 1233 sizeof(cfb->ddc_adapter.name)); 1234 cfb->ddc_adapter.owner = THIS_MODULE; 1235 cfb->ddc_adapter.class = I2C_CLASS_DDC; 1236 cfb->ddc_adapter.algo_data = &cfb->ddc_algo; 1237 cfb->ddc_adapter.dev.parent = cfb->fb.device; 1238 cfb->ddc_algo.setsda = cyber2000fb_ddc_setsda; 1239 cfb->ddc_algo.setscl = cyber2000fb_ddc_setscl; 1240 cfb->ddc_algo.getsda = cyber2000fb_ddc_getsda; 1241 cfb->ddc_algo.getscl = cyber2000fb_ddc_getscl; 1242 cfb->ddc_algo.udelay = 10; 1243 cfb->ddc_algo.timeout = 20; 1244 cfb->ddc_algo.data = cfb; 1245 1246 i2c_set_adapdata(&cfb->ddc_adapter, cfb); 1247 1248 return i2c_bit_add_bus(&cfb->ddc_adapter); 1249 } 1250 #endif /* CONFIG_FB_CYBER2000_DDC */ 1251 1252 #ifdef CONFIG_FB_CYBER2000_I2C 1253 static void cyber2000fb_i2c_setsda(void *data, int state) 1254 { 1255 struct cfb_info *cfb = data; 1256 unsigned int latch2; 1257 1258 spin_lock(&cfb->reg_b0_lock); 1259 latch2 = cyber2000_grphr(EXT_LATCH2, cfb); 1260 latch2 &= EXT_LATCH2_I2C_CLKEN; 1261 if (state) 1262 latch2 |= EXT_LATCH2_I2C_DATEN; 1263 cyber2000_grphw(EXT_LATCH2, latch2, cfb); 1264 spin_unlock(&cfb->reg_b0_lock); 1265 } 1266 1267 static void cyber2000fb_i2c_setscl(void *data, int state) 1268 { 1269 struct cfb_info *cfb = data; 1270 unsigned int latch2; 1271 1272 spin_lock(&cfb->reg_b0_lock); 1273 latch2 = cyber2000_grphr(EXT_LATCH2, cfb); 1274 latch2 &= EXT_LATCH2_I2C_DATEN; 1275 if (state) 1276 latch2 |= EXT_LATCH2_I2C_CLKEN; 1277 cyber2000_grphw(EXT_LATCH2, latch2, cfb); 1278 spin_unlock(&cfb->reg_b0_lock); 1279 } 1280 1281 static int cyber2000fb_i2c_getsda(void *data) 1282 { 1283 struct cfb_info *cfb = data; 1284 int ret; 1285 1286 spin_lock(&cfb->reg_b0_lock); 1287 ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_DAT); 1288 spin_unlock(&cfb->reg_b0_lock); 1289 1290 return ret; 1291 } 1292 1293 static int cyber2000fb_i2c_getscl(void *data) 1294 { 1295 struct cfb_info *cfb = data; 1296 int ret; 1297 1298 spin_lock(&cfb->reg_b0_lock); 1299 ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_CLK); 1300 spin_unlock(&cfb->reg_b0_lock); 1301 1302 return ret; 1303 } 1304 1305 static int cyber2000fb_i2c_register(struct cfb_info *cfb) 1306 { 1307 strlcpy(cfb->i2c_adapter.name, cfb->fb.fix.id, 1308 sizeof(cfb->i2c_adapter.name)); 1309 cfb->i2c_adapter.owner = THIS_MODULE; 1310 cfb->i2c_adapter.algo_data = &cfb->i2c_algo; 1311 cfb->i2c_adapter.dev.parent = cfb->fb.device; 1312 cfb->i2c_algo.setsda = cyber2000fb_i2c_setsda; 1313 cfb->i2c_algo.setscl = cyber2000fb_i2c_setscl; 1314 cfb->i2c_algo.getsda = cyber2000fb_i2c_getsda; 1315 cfb->i2c_algo.getscl = cyber2000fb_i2c_getscl; 1316 cfb->i2c_algo.udelay = 5; 1317 cfb->i2c_algo.timeout = msecs_to_jiffies(100); 1318 cfb->i2c_algo.data = cfb; 1319 1320 return i2c_bit_add_bus(&cfb->i2c_adapter); 1321 } 1322 1323 static void cyber2000fb_i2c_unregister(struct cfb_info *cfb) 1324 { 1325 i2c_del_adapter(&cfb->i2c_adapter); 1326 } 1327 #else 1328 #define cyber2000fb_i2c_register(cfb) (0) 1329 #define cyber2000fb_i2c_unregister(cfb) do { } while (0) 1330 #endif 1331 1332 /* 1333 * These parameters give 1334 * 640x480, hsync 31.5kHz, vsync 60Hz 1335 */ 1336 static const struct fb_videomode cyber2000fb_default_mode = { 1337 .refresh = 60, 1338 .xres = 640, 1339 .yres = 480, 1340 .pixclock = 39722, 1341 .left_margin = 56, 1342 .right_margin = 16, 1343 .upper_margin = 34, 1344 .lower_margin = 9, 1345 .hsync_len = 88, 1346 .vsync_len = 2, 1347 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 1348 .vmode = FB_VMODE_NONINTERLACED 1349 }; 1350 1351 static char igs_regs[] = { 1352 EXT_CRT_IRQ, 0, 1353 EXT_CRT_TEST, 0, 1354 EXT_SYNC_CTL, 0, 1355 EXT_SEG_WRITE_PTR, 0, 1356 EXT_SEG_READ_PTR, 0, 1357 EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE | 1358 EXT_BIU_MISC_COP_ENABLE | 1359 EXT_BIU_MISC_COP_BFC, 1360 EXT_FUNC_CTL, 0, 1361 CURS_H_START, 0, 1362 CURS_H_START + 1, 0, 1363 CURS_H_PRESET, 0, 1364 CURS_V_START, 0, 1365 CURS_V_START + 1, 0, 1366 CURS_V_PRESET, 0, 1367 CURS_CTL, 0, 1368 EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT, 1369 EXT_OVERSCAN_RED, 0, 1370 EXT_OVERSCAN_GREEN, 0, 1371 EXT_OVERSCAN_BLUE, 0, 1372 1373 /* some of these are questionable when we have a BIOS */ 1374 EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK | 1375 EXT_MEM_CTL0_RAS_1 | 1376 EXT_MEM_CTL0_MULTCAS, 1377 EXT_HIDDEN_CTL1, 0x30, 1378 EXT_FIFO_CTL, 0x0b, 1379 EXT_FIFO_CTL + 1, 0x17, 1380 0x76, 0x00, 1381 EXT_HIDDEN_CTL4, 0xc8 1382 }; 1383 1384 /* 1385 * Initialise the CyberPro hardware. On the CyberPro5XXXX, 1386 * ensure that we're using the correct PLL (5XXX's may be 1387 * programmed to use an additional set of PLLs.) 1388 */ 1389 static void cyberpro_init_hw(struct cfb_info *cfb) 1390 { 1391 int i; 1392 1393 for (i = 0; i < sizeof(igs_regs); i += 2) 1394 cyber2000_grphw(igs_regs[i], igs_regs[i + 1], cfb); 1395 1396 if (cfb->id == ID_CYBERPRO_5000) { 1397 unsigned char val; 1398 cyber2000fb_writeb(0xba, 0x3ce, cfb); 1399 val = cyber2000fb_readb(0x3cf, cfb) & 0x80; 1400 cyber2000fb_writeb(val, 0x3cf, cfb); 1401 } 1402 } 1403 1404 static struct cfb_info *cyberpro_alloc_fb_info(unsigned int id, char *name) 1405 { 1406 struct cfb_info *cfb; 1407 1408 cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL); 1409 if (!cfb) 1410 return NULL; 1411 1412 1413 cfb->id = id; 1414 1415 if (id == ID_CYBERPRO_5000) 1416 cfb->ref_ps = 40690; /* 24.576 MHz */ 1417 else 1418 cfb->ref_ps = 69842; /* 14.31818 MHz (69841?) */ 1419 1420 cfb->divisors[0] = 1; 1421 cfb->divisors[1] = 2; 1422 cfb->divisors[2] = 4; 1423 1424 if (id == ID_CYBERPRO_2000) 1425 cfb->divisors[3] = 8; 1426 else 1427 cfb->divisors[3] = 6; 1428 1429 strcpy(cfb->fb.fix.id, name); 1430 1431 cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; 1432 cfb->fb.fix.type_aux = 0; 1433 cfb->fb.fix.xpanstep = 0; 1434 cfb->fb.fix.ypanstep = 1; 1435 cfb->fb.fix.ywrapstep = 0; 1436 1437 switch (id) { 1438 case ID_IGA_1682: 1439 cfb->fb.fix.accel = 0; 1440 break; 1441 1442 case ID_CYBERPRO_2000: 1443 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000; 1444 break; 1445 1446 case ID_CYBERPRO_2010: 1447 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010; 1448 break; 1449 1450 case ID_CYBERPRO_5000: 1451 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000; 1452 break; 1453 } 1454 1455 cfb->fb.var.nonstd = 0; 1456 cfb->fb.var.activate = FB_ACTIVATE_NOW; 1457 cfb->fb.var.height = -1; 1458 cfb->fb.var.width = -1; 1459 cfb->fb.var.accel_flags = FB_ACCELF_TEXT; 1460 1461 cfb->fb.fbops = &cyber2000fb_ops; 1462 cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; 1463 cfb->fb.pseudo_palette = cfb->pseudo_palette; 1464 1465 spin_lock_init(&cfb->reg_b0_lock); 1466 1467 fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0); 1468 1469 return cfb; 1470 } 1471 1472 static void cyberpro_free_fb_info(struct cfb_info *cfb) 1473 { 1474 if (cfb) { 1475 /* 1476 * Free the colourmap 1477 */ 1478 fb_alloc_cmap(&cfb->fb.cmap, 0, 0); 1479 1480 kfree(cfb); 1481 } 1482 } 1483 1484 /* 1485 * Parse Cyber2000fb options. Usage: 1486 * video=cyber2000:font:fontname 1487 */ 1488 #ifndef MODULE 1489 static int cyber2000fb_setup(char *options) 1490 { 1491 char *opt; 1492 1493 if (!options || !*options) 1494 return 0; 1495 1496 while ((opt = strsep(&options, ",")) != NULL) { 1497 if (!*opt) 1498 continue; 1499 1500 if (strncmp(opt, "font:", 5) == 0) { 1501 static char default_font_storage[40]; 1502 1503 strlcpy(default_font_storage, opt + 5, 1504 sizeof(default_font_storage)); 1505 default_font = default_font_storage; 1506 continue; 1507 } 1508 1509 printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt); 1510 } 1511 return 0; 1512 } 1513 #endif /* MODULE */ 1514 1515 /* 1516 * The CyberPro chips can be placed on many different bus types. 1517 * This probe function is common to all bus types. The bus-specific 1518 * probe function is expected to have: 1519 * - enabled access to the linear memory region 1520 * - memory mapped access to the registers 1521 * - initialised mem_ctl1 and mem_ctl2 appropriately. 1522 */ 1523 static int cyberpro_common_probe(struct cfb_info *cfb) 1524 { 1525 u_long smem_size; 1526 u_int h_sync, v_sync; 1527 int err; 1528 1529 cyberpro_init_hw(cfb); 1530 1531 /* 1532 * Get the video RAM size and width from the VGA register. 1533 * This should have been already initialised by the BIOS, 1534 * but if it's garbage, claim default 1MB VRAM (woody) 1535 */ 1536 cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb); 1537 cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb); 1538 1539 /* 1540 * Determine the size of the memory. 1541 */ 1542 switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) { 1543 case MEM_CTL2_SIZE_4MB: 1544 smem_size = 0x00400000; 1545 break; 1546 case MEM_CTL2_SIZE_2MB: 1547 smem_size = 0x00200000; 1548 break; 1549 case MEM_CTL2_SIZE_1MB: 1550 smem_size = 0x00100000; 1551 break; 1552 default: 1553 smem_size = 0x00100000; 1554 break; 1555 } 1556 1557 cfb->fb.fix.smem_len = smem_size; 1558 cfb->fb.fix.mmio_len = MMIO_SIZE; 1559 cfb->fb.screen_base = cfb->region; 1560 1561 #ifdef CONFIG_FB_CYBER2000_DDC 1562 if (cyber2000fb_setup_ddc_bus(cfb) == 0) 1563 cfb->ddc_registered = true; 1564 #endif 1565 1566 err = -EINVAL; 1567 if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0, 1568 &cyber2000fb_default_mode, 8)) { 1569 printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id); 1570 goto failed; 1571 } 1572 1573 cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 / 1574 (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual); 1575 1576 if (cfb->fb.var.yres_virtual < cfb->fb.var.yres) 1577 cfb->fb.var.yres_virtual = cfb->fb.var.yres; 1578 1579 /* fb_set_var(&cfb->fb.var, -1, &cfb->fb); */ 1580 1581 /* 1582 * Calculate the hsync and vsync frequencies. Note that 1583 * we split the 1e12 constant up so that we can preserve 1584 * the precision and fit the results into 32-bit registers. 1585 * (1953125000 * 512 = 1e12) 1586 */ 1587 h_sync = 1953125000 / cfb->fb.var.pixclock; 1588 h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin + 1589 cfb->fb.var.right_margin + cfb->fb.var.hsync_len); 1590 v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin + 1591 cfb->fb.var.lower_margin + cfb->fb.var.vsync_len); 1592 1593 printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n", 1594 cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10, 1595 cfb->fb.var.xres, cfb->fb.var.yres, 1596 h_sync / 1000, h_sync % 1000, v_sync); 1597 1598 err = cyber2000fb_i2c_register(cfb); 1599 if (err) 1600 goto failed; 1601 1602 err = register_framebuffer(&cfb->fb); 1603 if (err) 1604 cyber2000fb_i2c_unregister(cfb); 1605 1606 failed: 1607 #ifdef CONFIG_FB_CYBER2000_DDC 1608 if (err && cfb->ddc_registered) 1609 i2c_del_adapter(&cfb->ddc_adapter); 1610 #endif 1611 return err; 1612 } 1613 1614 static void cyberpro_common_remove(struct cfb_info *cfb) 1615 { 1616 unregister_framebuffer(&cfb->fb); 1617 #ifdef CONFIG_FB_CYBER2000_DDC 1618 if (cfb->ddc_registered) 1619 i2c_del_adapter(&cfb->ddc_adapter); 1620 #endif 1621 cyber2000fb_i2c_unregister(cfb); 1622 } 1623 1624 static void cyberpro_common_resume(struct cfb_info *cfb) 1625 { 1626 cyberpro_init_hw(cfb); 1627 1628 /* 1629 * Reprogram the MEM_CTL1 and MEM_CTL2 registers 1630 */ 1631 cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb); 1632 cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb); 1633 1634 /* 1635 * Restore the old video mode and the palette. 1636 * We also need to tell fbcon to redraw the console. 1637 */ 1638 cyber2000fb_set_par(&cfb->fb); 1639 } 1640 1641 /* 1642 * We need to wake up the CyberPro, and make sure its in linear memory 1643 * mode. Unfortunately, this is specific to the platform and card that 1644 * we are running on. 1645 * 1646 * On x86 and ARM, should we be initialising the CyberPro first via the 1647 * IO registers, and then the MMIO registers to catch all cases? Can we 1648 * end up in the situation where the chip is in MMIO mode, but not awake 1649 * on an x86 system? 1650 */ 1651 static int cyberpro_pci_enable_mmio(struct cfb_info *cfb) 1652 { 1653 unsigned char val; 1654 1655 #if defined(__sparc_v9__) 1656 #error "You lose, consult DaveM." 1657 #elif defined(__sparc__) 1658 /* 1659 * SPARC does not have an "outb" instruction, so we generate 1660 * I/O cycles storing into a reserved memory space at 1661 * physical address 0x3000000 1662 */ 1663 unsigned char __iomem *iop; 1664 1665 iop = ioremap(0x3000000, 0x5000); 1666 if (iop == NULL) { 1667 printk(KERN_ERR "iga5000: cannot map I/O\n"); 1668 return -ENOMEM; 1669 } 1670 1671 writeb(0x18, iop + 0x46e8); 1672 writeb(0x01, iop + 0x102); 1673 writeb(0x08, iop + 0x46e8); 1674 writeb(EXT_BIU_MISC, iop + 0x3ce); 1675 writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf); 1676 1677 iounmap(iop); 1678 #else 1679 /* 1680 * Most other machine types are "normal", so 1681 * we use the standard IO-based wakeup. 1682 */ 1683 outb(0x18, 0x46e8); 1684 outb(0x01, 0x102); 1685 outb(0x08, 0x46e8); 1686 outb(EXT_BIU_MISC, 0x3ce); 1687 outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf); 1688 #endif 1689 1690 /* 1691 * Allow the CyberPro to accept PCI burst accesses 1692 */ 1693 if (cfb->id == ID_CYBERPRO_2010) { 1694 printk(KERN_INFO "%s: NOT enabling PCI bursts\n", 1695 cfb->fb.fix.id); 1696 } else { 1697 val = cyber2000_grphr(EXT_BUS_CTL, cfb); 1698 if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) { 1699 printk(KERN_INFO "%s: enabling PCI bursts\n", 1700 cfb->fb.fix.id); 1701 1702 val |= EXT_BUS_CTL_PCIBURST_WRITE; 1703 1704 if (cfb->id == ID_CYBERPRO_5000) 1705 val |= EXT_BUS_CTL_PCIBURST_READ; 1706 1707 cyber2000_grphw(EXT_BUS_CTL, val, cfb); 1708 } 1709 } 1710 1711 return 0; 1712 } 1713 1714 static int cyberpro_pci_probe(struct pci_dev *dev, 1715 const struct pci_device_id *id) 1716 { 1717 struct cfb_info *cfb; 1718 char name[16]; 1719 int err; 1720 1721 sprintf(name, "CyberPro%4X", id->device); 1722 1723 err = pci_enable_device(dev); 1724 if (err) 1725 return err; 1726 1727 err = -ENOMEM; 1728 cfb = cyberpro_alloc_fb_info(id->driver_data, name); 1729 if (!cfb) 1730 goto failed_release; 1731 1732 err = pci_request_regions(dev, cfb->fb.fix.id); 1733 if (err) 1734 goto failed_regions; 1735 1736 cfb->irq = dev->irq; 1737 cfb->region = pci_ioremap_bar(dev, 0); 1738 if (!cfb->region) { 1739 err = -ENOMEM; 1740 goto failed_ioremap; 1741 } 1742 1743 cfb->regs = cfb->region + MMIO_OFFSET; 1744 cfb->fb.device = &dev->dev; 1745 cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET; 1746 cfb->fb.fix.smem_start = pci_resource_start(dev, 0); 1747 1748 /* 1749 * Bring up the hardware. This is expected to enable access 1750 * to the linear memory region, and allow access to the memory 1751 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be 1752 * initialised. 1753 */ 1754 err = cyberpro_pci_enable_mmio(cfb); 1755 if (err) 1756 goto failed; 1757 1758 /* 1759 * Use MCLK from BIOS. FIXME: what about hotplug? 1760 */ 1761 cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb); 1762 cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb); 1763 1764 #ifdef __arm__ 1765 /* 1766 * MCLK on the NetWinder and the Shark is fixed at 75MHz 1767 */ 1768 if (machine_is_netwinder()) { 1769 cfb->mclk_mult = 0xdb; 1770 cfb->mclk_div = 0x54; 1771 } 1772 #endif 1773 1774 err = cyberpro_common_probe(cfb); 1775 if (err) 1776 goto failed; 1777 1778 /* 1779 * Our driver data 1780 */ 1781 pci_set_drvdata(dev, cfb); 1782 if (int_cfb_info == NULL) 1783 int_cfb_info = cfb; 1784 1785 return 0; 1786 1787 failed: 1788 iounmap(cfb->region); 1789 failed_ioremap: 1790 pci_release_regions(dev); 1791 failed_regions: 1792 cyberpro_free_fb_info(cfb); 1793 failed_release: 1794 return err; 1795 } 1796 1797 static void cyberpro_pci_remove(struct pci_dev *dev) 1798 { 1799 struct cfb_info *cfb = pci_get_drvdata(dev); 1800 1801 if (cfb) { 1802 cyberpro_common_remove(cfb); 1803 iounmap(cfb->region); 1804 cyberpro_free_fb_info(cfb); 1805 1806 if (cfb == int_cfb_info) 1807 int_cfb_info = NULL; 1808 1809 pci_release_regions(dev); 1810 } 1811 } 1812 1813 static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state) 1814 { 1815 return 0; 1816 } 1817 1818 /* 1819 * Re-initialise the CyberPro hardware 1820 */ 1821 static int cyberpro_pci_resume(struct pci_dev *dev) 1822 { 1823 struct cfb_info *cfb = pci_get_drvdata(dev); 1824 1825 if (cfb) { 1826 cyberpro_pci_enable_mmio(cfb); 1827 cyberpro_common_resume(cfb); 1828 } 1829 1830 return 0; 1831 } 1832 1833 static struct pci_device_id cyberpro_pci_table[] = { 1834 /* Not yet 1835 * { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682, 1836 * PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 }, 1837 */ 1838 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000, 1839 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 }, 1840 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010, 1841 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 }, 1842 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000, 1843 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 }, 1844 { 0, } 1845 }; 1846 1847 MODULE_DEVICE_TABLE(pci, cyberpro_pci_table); 1848 1849 static struct pci_driver cyberpro_driver = { 1850 .name = "CyberPro", 1851 .probe = cyberpro_pci_probe, 1852 .remove = cyberpro_pci_remove, 1853 .suspend = cyberpro_pci_suspend, 1854 .resume = cyberpro_pci_resume, 1855 .id_table = cyberpro_pci_table 1856 }; 1857 1858 /* 1859 * I don't think we can use the "module_init" stuff here because 1860 * the fbcon stuff may not be initialised yet. Hence the #ifdef 1861 * around module_init. 1862 * 1863 * Tony: "module_init" is now required 1864 */ 1865 static int __init cyber2000fb_init(void) 1866 { 1867 int ret = -1, err; 1868 1869 #ifndef MODULE 1870 char *option = NULL; 1871 1872 if (fb_get_options("cyber2000fb", &option)) 1873 return -ENODEV; 1874 cyber2000fb_setup(option); 1875 #endif 1876 1877 err = pci_register_driver(&cyberpro_driver); 1878 if (!err) 1879 ret = 0; 1880 1881 return ret ? err : 0; 1882 } 1883 module_init(cyber2000fb_init); 1884 1885 static void __exit cyberpro_exit(void) 1886 { 1887 pci_unregister_driver(&cyberpro_driver); 1888 } 1889 module_exit(cyberpro_exit); 1890 1891 MODULE_AUTHOR("Russell King"); 1892 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver"); 1893 MODULE_LICENSE("GPL"); 1894