1 /*
2  *  linux/drivers/video/cyber2000fb.c
3  *
4  *  Copyright (C) 1998-2002 Russell King
5  *
6  *  MIPS and 50xx clock support
7  *  Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
8  *
9  *  32 bit support, text color and panning fixes for modes != 8 bit
10  *  Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation.
15  *
16  * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
17  *
18  * Based on cyberfb.c.
19  *
20  * Note that we now use the new fbcon fix, var and cmap scheme.  We do
21  * still have to check which console is the currently displayed one
22  * however, especially for the colourmap stuff.
23  *
24  * We also use the new hotplug PCI subsystem.  I'm not sure if there
25  * are any such cards, but I'm erring on the side of caution.  We don't
26  * want to go pop just because someone does have one.
27  *
28  * Note that this doesn't work fully in the case of multiple CyberPro
29  * cards with grabbers.  We currently can only attach to the first
30  * CyberPro card found.
31  *
32  * When we're in truecolour mode, we power down the LUT RAM as a power
33  * saving feature.  Also, when we enter any of the powersaving modes
34  * (except soft blanking) we power down the RAMDACs.  This saves about
35  * 1W, which is roughly 8% of the power consumption of a NetWinder
36  * (which, incidentally, is about the same saving as a 2.5in hard disk
37  * entering standby mode.)
38  */
39 #include <linux/module.h>
40 #include <linux/kernel.h>
41 #include <linux/errno.h>
42 #include <linux/string.h>
43 #include <linux/mm.h>
44 #include <linux/slab.h>
45 #include <linux/delay.h>
46 #include <linux/fb.h>
47 #include <linux/pci.h>
48 #include <linux/init.h>
49 #include <linux/io.h>
50 #include <linux/i2c.h>
51 #include <linux/i2c-algo-bit.h>
52 
53 #include <asm/pgtable.h>
54 
55 #ifdef __arm__
56 #include <asm/mach-types.h>
57 #endif
58 
59 #include "cyber2000fb.h"
60 
61 struct cfb_info {
62 	struct fb_info		fb;
63 	struct display_switch	*dispsw;
64 	struct display		*display;
65 	unsigned char		__iomem *region;
66 	unsigned char		__iomem *regs;
67 	u_int			id;
68 	u_int			irq;
69 	int			func_use_count;
70 	u_long			ref_ps;
71 
72 	/*
73 	 * Clock divisors
74 	 */
75 	u_int			divisors[4];
76 
77 	struct {
78 		u8 red, green, blue;
79 	} palette[NR_PALETTE];
80 
81 	u_char			mem_ctl1;
82 	u_char			mem_ctl2;
83 	u_char			mclk_mult;
84 	u_char			mclk_div;
85 	/*
86 	 * RAMDAC control register is both of these or'ed together
87 	 */
88 	u_char			ramdac_ctrl;
89 	u_char			ramdac_powerdown;
90 
91 	u32			pseudo_palette[16];
92 
93 	spinlock_t		reg_b0_lock;
94 
95 #ifdef CONFIG_FB_CYBER2000_DDC
96 	bool			ddc_registered;
97 	struct i2c_adapter	ddc_adapter;
98 	struct i2c_algo_bit_data	ddc_algo;
99 #endif
100 
101 #ifdef CONFIG_FB_CYBER2000_I2C
102 	struct i2c_adapter	i2c_adapter;
103 	struct i2c_algo_bit_data i2c_algo;
104 #endif
105 };
106 
107 static char *default_font = "Acorn8x8";
108 module_param(default_font, charp, 0);
109 MODULE_PARM_DESC(default_font, "Default font name");
110 
111 /*
112  * Our access methods.
113  */
114 #define cyber2000fb_writel(val, reg, cfb)	writel(val, (cfb)->regs + (reg))
115 #define cyber2000fb_writew(val, reg, cfb)	writew(val, (cfb)->regs + (reg))
116 #define cyber2000fb_writeb(val, reg, cfb)	writeb(val, (cfb)->regs + (reg))
117 
118 #define cyber2000fb_readb(reg, cfb)		readb((cfb)->regs + (reg))
119 
120 static inline void
121 cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
122 {
123 	cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
124 }
125 
126 static inline void
127 cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
128 {
129 	cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
130 }
131 
132 static inline unsigned int
133 cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
134 {
135 	cyber2000fb_writeb(reg, 0x3ce, cfb);
136 	return cyber2000fb_readb(0x3cf, cfb);
137 }
138 
139 static inline void
140 cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
141 {
142 	cyber2000fb_readb(0x3da, cfb);
143 	cyber2000fb_writeb(reg, 0x3c0, cfb);
144 	cyber2000fb_readb(0x3c1, cfb);
145 	cyber2000fb_writeb(val, 0x3c0, cfb);
146 }
147 
148 static inline void
149 cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
150 {
151 	cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
152 }
153 
154 /* -------------------- Hardware specific routines ------------------------- */
155 
156 /*
157  * Hardware Cyber2000 Acceleration
158  */
159 static void
160 cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
161 {
162 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
163 	unsigned long dst, col;
164 
165 	if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
166 		cfb_fillrect(info, rect);
167 		return;
168 	}
169 
170 	cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
171 	cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
172 	cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
173 
174 	col = rect->color;
175 	if (cfb->fb.var.bits_per_pixel > 8)
176 		col = ((u32 *)cfb->fb.pseudo_palette)[col];
177 	cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
178 
179 	dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
180 	if (cfb->fb.var.bits_per_pixel == 24) {
181 		cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
182 		dst *= 3;
183 	}
184 
185 	cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
186 	cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
187 	cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
188 	cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
189 }
190 
191 static void
192 cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
193 {
194 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
195 	unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
196 	unsigned long src, dst;
197 
198 	if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
199 		cfb_copyarea(info, region);
200 		return;
201 	}
202 
203 	cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
204 	cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
205 	cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
206 
207 	src = region->sx + region->sy * cfb->fb.var.xres_virtual;
208 	dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
209 
210 	if (region->sx < region->dx) {
211 		src += region->width - 1;
212 		dst += region->width - 1;
213 		cmd |= CO_CMD_L_INC_LEFT;
214 	}
215 
216 	if (region->sy < region->dy) {
217 		src += (region->height - 1) * cfb->fb.var.xres_virtual;
218 		dst += (region->height - 1) * cfb->fb.var.xres_virtual;
219 		cmd |= CO_CMD_L_INC_UP;
220 	}
221 
222 	if (cfb->fb.var.bits_per_pixel == 24) {
223 		cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
224 		src *= 3;
225 		dst *= 3;
226 	}
227 	cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
228 	cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
229 	cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
230 	cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
231 	cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
232 			   CO_REG_CMD_H, cfb);
233 }
234 
235 static void
236 cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
237 {
238 	cfb_imageblit(info, image);
239 	return;
240 }
241 
242 static int cyber2000fb_sync(struct fb_info *info)
243 {
244 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
245 	int count = 100000;
246 
247 	if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
248 		return 0;
249 
250 	while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
251 		if (!count--) {
252 			debug_printf("accel_wait timed out\n");
253 			cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
254 			break;
255 		}
256 		udelay(1);
257 	}
258 	return 0;
259 }
260 
261 /*
262  * ===========================================================================
263  */
264 
265 static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
266 {
267 	u_int mask = (1 << bf->length) - 1;
268 
269 	return (val >> (16 - bf->length) & mask) << bf->offset;
270 }
271 
272 /*
273  *    Set a single color register. Return != 0 for invalid regno.
274  */
275 static int
276 cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
277 		      u_int transp, struct fb_info *info)
278 {
279 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
280 	struct fb_var_screeninfo *var = &cfb->fb.var;
281 	u32 pseudo_val;
282 	int ret = 1;
283 
284 	switch (cfb->fb.fix.visual) {
285 	default:
286 		return 1;
287 
288 	/*
289 	 * Pseudocolour:
290 	 *	   8     8
291 	 * pixel --/--+--/-->  red lut  --> red dac
292 	 *	      |  8
293 	 *	      +--/--> green lut --> green dac
294 	 *	      |  8
295 	 *	      +--/-->  blue lut --> blue dac
296 	 */
297 	case FB_VISUAL_PSEUDOCOLOR:
298 		if (regno >= NR_PALETTE)
299 			return 1;
300 
301 		red >>= 8;
302 		green >>= 8;
303 		blue >>= 8;
304 
305 		cfb->palette[regno].red = red;
306 		cfb->palette[regno].green = green;
307 		cfb->palette[regno].blue = blue;
308 
309 		cyber2000fb_writeb(regno, 0x3c8, cfb);
310 		cyber2000fb_writeb(red, 0x3c9, cfb);
311 		cyber2000fb_writeb(green, 0x3c9, cfb);
312 		cyber2000fb_writeb(blue, 0x3c9, cfb);
313 		return 0;
314 
315 	/*
316 	 * Direct colour:
317 	 *	   n     rl
318 	 * pixel --/--+--/-->  red lut  --> red dac
319 	 *	      |  gl
320 	 *	      +--/--> green lut --> green dac
321 	 *	      |  bl
322 	 *	      +--/-->  blue lut --> blue dac
323 	 * n = bpp, rl = red length, gl = green length, bl = blue length
324 	 */
325 	case FB_VISUAL_DIRECTCOLOR:
326 		red >>= 8;
327 		green >>= 8;
328 		blue >>= 8;
329 
330 		if (var->green.length == 6 && regno < 64) {
331 			cfb->palette[regno << 2].green = green;
332 
333 			/*
334 			 * The 6 bits of the green component are applied
335 			 * to the high 6 bits of the LUT.
336 			 */
337 			cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
338 			cyber2000fb_writeb(cfb->palette[regno >> 1].red,
339 					   0x3c9, cfb);
340 			cyber2000fb_writeb(green, 0x3c9, cfb);
341 			cyber2000fb_writeb(cfb->palette[regno >> 1].blue,
342 					   0x3c9, cfb);
343 
344 			green = cfb->palette[regno << 3].green;
345 
346 			ret = 0;
347 		}
348 
349 		if (var->green.length >= 5 && regno < 32) {
350 			cfb->palette[regno << 3].red = red;
351 			cfb->palette[regno << 3].green = green;
352 			cfb->palette[regno << 3].blue = blue;
353 
354 			/*
355 			 * The 5 bits of each colour component are
356 			 * applied to the high 5 bits of the LUT.
357 			 */
358 			cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
359 			cyber2000fb_writeb(red, 0x3c9, cfb);
360 			cyber2000fb_writeb(green, 0x3c9, cfb);
361 			cyber2000fb_writeb(blue, 0x3c9, cfb);
362 			ret = 0;
363 		}
364 
365 		if (var->green.length == 4 && regno < 16) {
366 			cfb->palette[regno << 4].red = red;
367 			cfb->palette[regno << 4].green = green;
368 			cfb->palette[regno << 4].blue = blue;
369 
370 			/*
371 			 * The 5 bits of each colour component are
372 			 * applied to the high 5 bits of the LUT.
373 			 */
374 			cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
375 			cyber2000fb_writeb(red, 0x3c9, cfb);
376 			cyber2000fb_writeb(green, 0x3c9, cfb);
377 			cyber2000fb_writeb(blue, 0x3c9, cfb);
378 			ret = 0;
379 		}
380 
381 		/*
382 		 * Since this is only used for the first 16 colours, we
383 		 * don't have to care about overflowing for regno >= 32
384 		 */
385 		pseudo_val = regno << var->red.offset |
386 			     regno << var->green.offset |
387 			     regno << var->blue.offset;
388 		break;
389 
390 	/*
391 	 * True colour:
392 	 *	   n     rl
393 	 * pixel --/--+--/--> red dac
394 	 *	      |  gl
395 	 *	      +--/--> green dac
396 	 *	      |  bl
397 	 *	      +--/--> blue dac
398 	 * n = bpp, rl = red length, gl = green length, bl = blue length
399 	 */
400 	case FB_VISUAL_TRUECOLOR:
401 		pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
402 		pseudo_val |= convert_bitfield(red, &var->red);
403 		pseudo_val |= convert_bitfield(green, &var->green);
404 		pseudo_val |= convert_bitfield(blue, &var->blue);
405 		ret = 0;
406 		break;
407 	}
408 
409 	/*
410 	 * Now set our pseudo palette for the CFB16/24/32 drivers.
411 	 */
412 	if (regno < 16)
413 		((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
414 
415 	return ret;
416 }
417 
418 struct par_info {
419 	/*
420 	 * Hardware
421 	 */
422 	u_char	clock_mult;
423 	u_char	clock_div;
424 	u_char	extseqmisc;
425 	u_char	co_pixfmt;
426 	u_char	crtc_ofl;
427 	u_char	crtc[19];
428 	u_int	width;
429 	u_int	pitch;
430 	u_int	fetch;
431 
432 	/*
433 	 * Other
434 	 */
435 	u_char	ramdac;
436 };
437 
438 static const u_char crtc_idx[] = {
439 	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
440 	0x08, 0x09,
441 	0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
442 };
443 
444 static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
445 {
446 	unsigned int i;
447 	unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
448 
449 	cyber2000fb_writeb(0x56, 0x3ce, cfb);
450 	i = cyber2000fb_readb(0x3cf, cfb);
451 	cyber2000fb_writeb(i | 4, 0x3cf, cfb);
452 	cyber2000fb_writeb(val, 0x3c6, cfb);
453 	cyber2000fb_writeb(i, 0x3cf, cfb);
454 	/* prevent card lock-up observed on x86 with CyberPro 2000 */
455 	cyber2000fb_readb(0x3cf, cfb);
456 }
457 
458 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
459 {
460 	u_int i;
461 
462 	/*
463 	 * Blank palette
464 	 */
465 	for (i = 0; i < NR_PALETTE; i++) {
466 		cyber2000fb_writeb(i, 0x3c8, cfb);
467 		cyber2000fb_writeb(0, 0x3c9, cfb);
468 		cyber2000fb_writeb(0, 0x3c9, cfb);
469 		cyber2000fb_writeb(0, 0x3c9, cfb);
470 	}
471 
472 	cyber2000fb_writeb(0xef, 0x3c2, cfb);
473 	cyber2000_crtcw(0x11, 0x0b, cfb);
474 	cyber2000_attrw(0x11, 0x00, cfb);
475 
476 	cyber2000_seqw(0x00, 0x01, cfb);
477 	cyber2000_seqw(0x01, 0x01, cfb);
478 	cyber2000_seqw(0x02, 0x0f, cfb);
479 	cyber2000_seqw(0x03, 0x00, cfb);
480 	cyber2000_seqw(0x04, 0x0e, cfb);
481 	cyber2000_seqw(0x00, 0x03, cfb);
482 
483 	for (i = 0; i < sizeof(crtc_idx); i++)
484 		cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
485 
486 	for (i = 0x0a; i < 0x10; i++)
487 		cyber2000_crtcw(i, 0, cfb);
488 
489 	cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
490 	cyber2000_grphw(0x00, 0x00, cfb);
491 	cyber2000_grphw(0x01, 0x00, cfb);
492 	cyber2000_grphw(0x02, 0x00, cfb);
493 	cyber2000_grphw(0x03, 0x00, cfb);
494 	cyber2000_grphw(0x04, 0x00, cfb);
495 	cyber2000_grphw(0x05, 0x60, cfb);
496 	cyber2000_grphw(0x06, 0x05, cfb);
497 	cyber2000_grphw(0x07, 0x0f, cfb);
498 	cyber2000_grphw(0x08, 0xff, cfb);
499 
500 	/* Attribute controller registers */
501 	for (i = 0; i < 16; i++)
502 		cyber2000_attrw(i, i, cfb);
503 
504 	cyber2000_attrw(0x10, 0x01, cfb);
505 	cyber2000_attrw(0x11, 0x00, cfb);
506 	cyber2000_attrw(0x12, 0x0f, cfb);
507 	cyber2000_attrw(0x13, 0x00, cfb);
508 	cyber2000_attrw(0x14, 0x00, cfb);
509 
510 	/* PLL registers */
511 	spin_lock(&cfb->reg_b0_lock);
512 	cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
513 	cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
514 	cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
515 	cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
516 	cyber2000_grphw(0x90, 0x01, cfb);
517 	cyber2000_grphw(0xb9, 0x80, cfb);
518 	cyber2000_grphw(0xb9, 0x00, cfb);
519 	spin_unlock(&cfb->reg_b0_lock);
520 
521 	cfb->ramdac_ctrl = hw->ramdac;
522 	cyber2000fb_write_ramdac_ctrl(cfb);
523 
524 	cyber2000fb_writeb(0x20, 0x3c0, cfb);
525 	cyber2000fb_writeb(0xff, 0x3c6, cfb);
526 
527 	cyber2000_grphw(0x14, hw->fetch, cfb);
528 	cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
529 			      ((hw->pitch >> 4) & 0x30), cfb);
530 	cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
531 
532 	/*
533 	 * Set up accelerator registers
534 	 */
535 	cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
536 	cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
537 	cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
538 }
539 
540 static inline int
541 cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
542 {
543 	u_int base = var->yoffset * var->xres_virtual + var->xoffset;
544 
545 	base *= var->bits_per_pixel;
546 
547 	/*
548 	 * Convert to bytes and shift two extra bits because DAC
549 	 * can only start on 4 byte aligned data.
550 	 */
551 	base >>= 5;
552 
553 	if (base >= 1 << 20)
554 		return -EINVAL;
555 
556 	cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
557 	cyber2000_crtcw(0x0c, base >> 8, cfb);
558 	cyber2000_crtcw(0x0d, base, cfb);
559 
560 	return 0;
561 }
562 
563 static int
564 cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
565 			struct fb_var_screeninfo *var)
566 {
567 	u_int Htotal, Hblankend, Hsyncend;
568 	u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
569 #define ENCODE_BIT(v, b1, m, b2) ((((v) >> (b1)) & (m)) << (b2))
570 
571 	hw->crtc[13] = hw->pitch;
572 	hw->crtc[17] = 0xe3;
573 	hw->crtc[14] = 0;
574 	hw->crtc[8]  = 0;
575 
576 	Htotal     = var->xres + var->right_margin +
577 		     var->hsync_len + var->left_margin;
578 
579 	if (Htotal > 2080)
580 		return -EINVAL;
581 
582 	hw->crtc[0] = (Htotal >> 3) - 5;
583 	hw->crtc[1] = (var->xres >> 3) - 1;
584 	hw->crtc[2] = var->xres >> 3;
585 	hw->crtc[4] = (var->xres + var->right_margin) >> 3;
586 
587 	Hblankend   = (Htotal - 4 * 8) >> 3;
588 
589 	hw->crtc[3] = ENCODE_BIT(Hblankend,  0, 0x1f,  0) |
590 		      ENCODE_BIT(1,          0, 0x01,  7);
591 
592 	Hsyncend    = (var->xres + var->right_margin + var->hsync_len) >> 3;
593 
594 	hw->crtc[5] = ENCODE_BIT(Hsyncend,   0, 0x1f,  0) |
595 		      ENCODE_BIT(Hblankend,  5, 0x01,  7);
596 
597 	Vdispend    = var->yres - 1;
598 	Vsyncstart  = var->yres + var->lower_margin;
599 	Vsyncend    = var->yres + var->lower_margin + var->vsync_len;
600 	Vtotal      = var->yres + var->lower_margin + var->vsync_len +
601 		      var->upper_margin - 2;
602 
603 	if (Vtotal > 2047)
604 		return -EINVAL;
605 
606 	Vblankstart = var->yres + 6;
607 	Vblankend   = Vtotal - 10;
608 
609 	hw->crtc[6]  = Vtotal;
610 	hw->crtc[7]  = ENCODE_BIT(Vtotal,     8, 0x01,  0) |
611 			ENCODE_BIT(Vdispend,   8, 0x01,  1) |
612 			ENCODE_BIT(Vsyncstart, 8, 0x01,  2) |
613 			ENCODE_BIT(Vblankstart, 8, 0x01,  3) |
614 			ENCODE_BIT(1,          0, 0x01,  4) |
615 			ENCODE_BIT(Vtotal,     9, 0x01,  5) |
616 			ENCODE_BIT(Vdispend,   9, 0x01,  6) |
617 			ENCODE_BIT(Vsyncstart, 9, 0x01,  7);
618 	hw->crtc[9]  = ENCODE_BIT(0,          0, 0x1f,  0) |
619 			ENCODE_BIT(Vblankstart, 9, 0x01,  5) |
620 			ENCODE_BIT(1,          0, 0x01,  6);
621 	hw->crtc[10] = Vsyncstart;
622 	hw->crtc[11] = ENCODE_BIT(Vsyncend,   0, 0x0f,  0) |
623 		       ENCODE_BIT(1,          0, 0x01,  7);
624 	hw->crtc[12] = Vdispend;
625 	hw->crtc[15] = Vblankstart;
626 	hw->crtc[16] = Vblankend;
627 	hw->crtc[18] = 0xff;
628 
629 	/*
630 	 * overflow - graphics reg 0x11
631 	 * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
632 	 * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
633 	 */
634 	hw->crtc_ofl =
635 		ENCODE_BIT(Vtotal, 10, 0x01, 0) |
636 		ENCODE_BIT(Vdispend, 10, 0x01, 1) |
637 		ENCODE_BIT(Vsyncstart, 10, 0x01, 2) |
638 		ENCODE_BIT(Vblankstart, 10, 0x01, 3) |
639 		EXT_CRT_VRTOFL_LINECOMP10;
640 
641 	/* woody: set the interlaced bit... */
642 	/* FIXME: what about doublescan? */
643 	if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
644 		hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
645 
646 	return 0;
647 }
648 
649 /*
650  * The following was discovered by a good monitor, bit twiddling, theorising
651  * and but mostly luck.  Strangely, it looks like everyone elses' PLL!
652  *
653  * Clock registers:
654  *   fclock = fpll / div2
655  *   fpll   = fref * mult / div1
656  * where:
657  *   fref = 14.318MHz (69842ps)
658  *   mult = reg0xb0.7:0
659  *   div1 = (reg0xb1.5:0 + 1)
660  *   div2 =  2^(reg0xb1.7:6)
661  *   fpll should be between 115 and 260 MHz
662  *  (8696ps and 3846ps)
663  */
664 static int
665 cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
666 			 struct fb_var_screeninfo *var)
667 {
668 	u_long pll_ps = var->pixclock;
669 	const u_long ref_ps = cfb->ref_ps;
670 	u_int div2, t_div1, best_div1, best_mult;
671 	int best_diff;
672 	int vco;
673 
674 	/*
675 	 * Step 1:
676 	 *   find div2 such that 115MHz < fpll < 260MHz
677 	 *   and 0 <= div2 < 4
678 	 */
679 	for (div2 = 0; div2 < 4; div2++) {
680 		u_long new_pll;
681 
682 		new_pll = pll_ps / cfb->divisors[div2];
683 		if (8696 > new_pll && new_pll > 3846) {
684 			pll_ps = new_pll;
685 			break;
686 		}
687 	}
688 
689 	if (div2 == 4)
690 		return -EINVAL;
691 
692 	/*
693 	 * Step 2:
694 	 *  Given pll_ps and ref_ps, find:
695 	 *    pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
696 	 *  where { 1 < best_div1 < 32, 1 < best_mult < 256 }
697 	 *    pll_ps_calc = best_div1 / (ref_ps * best_mult)
698 	 */
699 	best_diff = 0x7fffffff;
700 	best_mult = 2;
701 	best_div1 = 32;
702 	for (t_div1 = 2; t_div1 < 32; t_div1 += 1) {
703 		u_int rr, t_mult, t_pll_ps;
704 		int diff;
705 
706 		/*
707 		 * Find the multiplier for this divisor
708 		 */
709 		rr = ref_ps * t_div1;
710 		t_mult = (rr + pll_ps / 2) / pll_ps;
711 
712 		/*
713 		 * Is the multiplier within the correct range?
714 		 */
715 		if (t_mult > 256 || t_mult < 2)
716 			continue;
717 
718 		/*
719 		 * Calculate the actual clock period from this multiplier
720 		 * and divisor, and estimate the error.
721 		 */
722 		t_pll_ps = (rr + t_mult / 2) / t_mult;
723 		diff = pll_ps - t_pll_ps;
724 		if (diff < 0)
725 			diff = -diff;
726 
727 		if (diff < best_diff) {
728 			best_diff = diff;
729 			best_mult = t_mult;
730 			best_div1 = t_div1;
731 		}
732 
733 		/*
734 		 * If we hit an exact value, there is no point in continuing.
735 		 */
736 		if (diff == 0)
737 			break;
738 	}
739 
740 	/*
741 	 * Step 3:
742 	 *  combine values
743 	 */
744 	hw->clock_mult = best_mult - 1;
745 	hw->clock_div  = div2 << 6 | (best_div1 - 1);
746 
747 	vco = ref_ps * best_div1 / best_mult;
748 	if ((ref_ps == 40690) && (vco < 5556))
749 		/* Set VFSEL when VCO > 180MHz (5.556 ps). */
750 		hw->clock_div |= EXT_DCLK_DIV_VFSEL;
751 
752 	return 0;
753 }
754 
755 /*
756  *    Set the User Defined Part of the Display
757  */
758 static int
759 cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
760 {
761 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
762 	struct par_info hw;
763 	unsigned int mem;
764 	int err;
765 
766 	var->transp.msb_right	= 0;
767 	var->red.msb_right	= 0;
768 	var->green.msb_right	= 0;
769 	var->blue.msb_right	= 0;
770 	var->transp.offset	= 0;
771 	var->transp.length	= 0;
772 
773 	switch (var->bits_per_pixel) {
774 	case 8:	/* PSEUDOCOLOUR, 256 */
775 		var->red.offset		= 0;
776 		var->red.length		= 8;
777 		var->green.offset	= 0;
778 		var->green.length	= 8;
779 		var->blue.offset	= 0;
780 		var->blue.length	= 8;
781 		break;
782 
783 	case 16:/* DIRECTCOLOUR, 64k or 32k */
784 		switch (var->green.length) {
785 		case 6: /* RGB565, 64k */
786 			var->red.offset		= 11;
787 			var->red.length		= 5;
788 			var->green.offset	= 5;
789 			var->green.length	= 6;
790 			var->blue.offset	= 0;
791 			var->blue.length	= 5;
792 			break;
793 
794 		default:
795 		case 5: /* RGB555, 32k */
796 			var->red.offset		= 10;
797 			var->red.length		= 5;
798 			var->green.offset	= 5;
799 			var->green.length	= 5;
800 			var->blue.offset	= 0;
801 			var->blue.length	= 5;
802 			break;
803 
804 		case 4: /* RGB444, 4k + transparency? */
805 			var->transp.offset	= 12;
806 			var->transp.length	= 4;
807 			var->red.offset		= 8;
808 			var->red.length		= 4;
809 			var->green.offset	= 4;
810 			var->green.length	= 4;
811 			var->blue.offset	= 0;
812 			var->blue.length	= 4;
813 			break;
814 		}
815 		break;
816 
817 	case 24:/* TRUECOLOUR, 16m */
818 		var->red.offset		= 16;
819 		var->red.length		= 8;
820 		var->green.offset	= 8;
821 		var->green.length	= 8;
822 		var->blue.offset	= 0;
823 		var->blue.length	= 8;
824 		break;
825 
826 	case 32:/* TRUECOLOUR, 16m */
827 		var->transp.offset	= 24;
828 		var->transp.length	= 8;
829 		var->red.offset		= 16;
830 		var->red.length		= 8;
831 		var->green.offset	= 8;
832 		var->green.length	= 8;
833 		var->blue.offset	= 0;
834 		var->blue.length	= 8;
835 		break;
836 
837 	default:
838 		return -EINVAL;
839 	}
840 
841 	mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
842 	if (mem > cfb->fb.fix.smem_len)
843 		var->yres_virtual = cfb->fb.fix.smem_len * 8 /
844 				    (var->bits_per_pixel * var->xres_virtual);
845 
846 	if (var->yres > var->yres_virtual)
847 		var->yres = var->yres_virtual;
848 	if (var->xres > var->xres_virtual)
849 		var->xres = var->xres_virtual;
850 
851 	err = cyber2000fb_decode_clock(&hw, cfb, var);
852 	if (err)
853 		return err;
854 
855 	err = cyber2000fb_decode_crtc(&hw, cfb, var);
856 	if (err)
857 		return err;
858 
859 	return 0;
860 }
861 
862 static int cyber2000fb_set_par(struct fb_info *info)
863 {
864 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
865 	struct fb_var_screeninfo *var = &cfb->fb.var;
866 	struct par_info hw;
867 	unsigned int mem;
868 
869 	hw.width = var->xres_virtual;
870 	hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
871 
872 	switch (var->bits_per_pixel) {
873 	case 8:
874 		hw.co_pixfmt		= CO_PIXFMT_8BPP;
875 		hw.pitch		= hw.width >> 3;
876 		hw.extseqmisc		= EXT_SEQ_MISC_8;
877 		break;
878 
879 	case 16:
880 		hw.co_pixfmt		= CO_PIXFMT_16BPP;
881 		hw.pitch		= hw.width >> 2;
882 
883 		switch (var->green.length) {
884 		case 6: /* RGB565, 64k */
885 			hw.extseqmisc	= EXT_SEQ_MISC_16_RGB565;
886 			break;
887 		case 5: /* RGB555, 32k */
888 			hw.extseqmisc	= EXT_SEQ_MISC_16_RGB555;
889 			break;
890 		case 4: /* RGB444, 4k + transparency? */
891 			hw.extseqmisc	= EXT_SEQ_MISC_16_RGB444;
892 			break;
893 		default:
894 			BUG();
895 		}
896 		break;
897 
898 	case 24:/* TRUECOLOUR, 16m */
899 		hw.co_pixfmt		= CO_PIXFMT_24BPP;
900 		hw.width		*= 3;
901 		hw.pitch		= hw.width >> 3;
902 		hw.ramdac		|= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
903 		hw.extseqmisc		= EXT_SEQ_MISC_24_RGB888;
904 		break;
905 
906 	case 32:/* TRUECOLOUR, 16m */
907 		hw.co_pixfmt		= CO_PIXFMT_32BPP;
908 		hw.pitch		= hw.width >> 1;
909 		hw.ramdac		|= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
910 		hw.extseqmisc		= EXT_SEQ_MISC_32;
911 		break;
912 
913 	default:
914 		BUG();
915 	}
916 
917 	/*
918 	 * Sigh, this is absolutely disgusting, but caused by
919 	 * the way the fbcon developers want to separate out
920 	 * the "checking" and the "setting" of the video mode.
921 	 *
922 	 * If the mode is not suitable for the hardware here,
923 	 * we can't prevent it being set by returning an error.
924 	 *
925 	 * In theory, since NetWinders contain just one VGA card,
926 	 * we should never end up hitting this problem.
927 	 */
928 	BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
929 	BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
930 
931 	hw.width -= 1;
932 	hw.fetch = hw.pitch;
933 	if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
934 		hw.fetch <<= 1;
935 	hw.fetch += 1;
936 
937 	cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
938 
939 	/*
940 	 * Same here - if the size of the video mode exceeds the
941 	 * available RAM, we can't prevent this mode being set.
942 	 *
943 	 * In theory, since NetWinders contain just one VGA card,
944 	 * we should never end up hitting this problem.
945 	 */
946 	mem = cfb->fb.fix.line_length * var->yres_virtual;
947 	BUG_ON(mem > cfb->fb.fix.smem_len);
948 
949 	/*
950 	 * 8bpp displays are always pseudo colour.  16bpp and above
951 	 * are direct colour or true colour, depending on whether
952 	 * the RAMDAC palettes are bypassed.  (Direct colour has
953 	 * palettes, true colour does not.)
954 	 */
955 	if (var->bits_per_pixel == 8)
956 		cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
957 	else if (hw.ramdac & RAMDAC_BYPASS)
958 		cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
959 	else
960 		cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
961 
962 	cyber2000fb_set_timing(cfb, &hw);
963 	cyber2000fb_update_start(cfb, var);
964 
965 	return 0;
966 }
967 
968 /*
969  *    Pan or Wrap the Display
970  */
971 static int
972 cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
973 {
974 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
975 
976 	if (cyber2000fb_update_start(cfb, var))
977 		return -EINVAL;
978 
979 	cfb->fb.var.xoffset = var->xoffset;
980 	cfb->fb.var.yoffset = var->yoffset;
981 
982 	if (var->vmode & FB_VMODE_YWRAP) {
983 		cfb->fb.var.vmode |= FB_VMODE_YWRAP;
984 	} else {
985 		cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
986 	}
987 
988 	return 0;
989 }
990 
991 /*
992  *    (Un)Blank the display.
993  *
994  *  Blank the screen if blank_mode != 0, else unblank. If
995  *  blank == NULL then the caller blanks by setting the CLUT
996  *  (Color Look Up Table) to all black. Return 0 if blanking
997  *  succeeded, != 0 if un-/blanking failed due to e.g. a
998  *  video mode which doesn't support it. Implements VESA
999  *  suspend and powerdown modes on hardware that supports
1000  *  disabling hsync/vsync:
1001  *    blank_mode == 2: suspend vsync
1002  *    blank_mode == 3: suspend hsync
1003  *    blank_mode == 4: powerdown
1004  *
1005  *  wms...Enable VESA DMPS compatible powerdown mode
1006  *  run "setterm -powersave powerdown" to take advantage
1007  */
1008 static int cyber2000fb_blank(int blank, struct fb_info *info)
1009 {
1010 	struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
1011 	unsigned int sync = 0;
1012 	int i;
1013 
1014 	switch (blank) {
1015 	case FB_BLANK_POWERDOWN:	/* powerdown - both sync lines down */
1016 		sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
1017 		break;
1018 	case FB_BLANK_HSYNC_SUSPEND:	/* hsync off */
1019 		sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
1020 		break;
1021 	case FB_BLANK_VSYNC_SUSPEND:	/* vsync off */
1022 		sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
1023 		break;
1024 	case FB_BLANK_NORMAL:		/* soft blank */
1025 	default:			/* unblank */
1026 		break;
1027 	}
1028 
1029 	cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
1030 
1031 	if (blank <= 1) {
1032 		/* turn on ramdacs */
1033 		cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1034 					   RAMDAC_RAMPWRDN);
1035 		cyber2000fb_write_ramdac_ctrl(cfb);
1036 	}
1037 
1038 	/*
1039 	 * Soft blank/unblank the display.
1040 	 */
1041 	if (blank) {	/* soft blank */
1042 		for (i = 0; i < NR_PALETTE; i++) {
1043 			cyber2000fb_writeb(i, 0x3c8, cfb);
1044 			cyber2000fb_writeb(0, 0x3c9, cfb);
1045 			cyber2000fb_writeb(0, 0x3c9, cfb);
1046 			cyber2000fb_writeb(0, 0x3c9, cfb);
1047 		}
1048 	} else {	/* unblank */
1049 		for (i = 0; i < NR_PALETTE; i++) {
1050 			cyber2000fb_writeb(i, 0x3c8, cfb);
1051 			cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
1052 			cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
1053 			cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
1054 		}
1055 	}
1056 
1057 	if (blank >= 2) {
1058 		/* turn off ramdacs */
1059 		cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1060 					 RAMDAC_RAMPWRDN;
1061 		cyber2000fb_write_ramdac_ctrl(cfb);
1062 	}
1063 
1064 	return 0;
1065 }
1066 
1067 static struct fb_ops cyber2000fb_ops = {
1068 	.owner		= THIS_MODULE,
1069 	.fb_check_var	= cyber2000fb_check_var,
1070 	.fb_set_par	= cyber2000fb_set_par,
1071 	.fb_setcolreg	= cyber2000fb_setcolreg,
1072 	.fb_blank	= cyber2000fb_blank,
1073 	.fb_pan_display	= cyber2000fb_pan_display,
1074 	.fb_fillrect	= cyber2000fb_fillrect,
1075 	.fb_copyarea	= cyber2000fb_copyarea,
1076 	.fb_imageblit	= cyber2000fb_imageblit,
1077 	.fb_sync	= cyber2000fb_sync,
1078 };
1079 
1080 /*
1081  * This is the only "static" reference to the internal data structures
1082  * of this driver.  It is here solely at the moment to support the other
1083  * CyberPro modules external to this driver.
1084  */
1085 static struct cfb_info *int_cfb_info;
1086 
1087 /*
1088  * Enable access to the extended registers
1089  */
1090 void cyber2000fb_enable_extregs(struct cfb_info *cfb)
1091 {
1092 	cfb->func_use_count += 1;
1093 
1094 	if (cfb->func_use_count == 1) {
1095 		int old;
1096 
1097 		old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1098 		old |= EXT_FUNC_CTL_EXTREGENBL;
1099 		cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1100 	}
1101 }
1102 EXPORT_SYMBOL(cyber2000fb_enable_extregs);
1103 
1104 /*
1105  * Disable access to the extended registers
1106  */
1107 void cyber2000fb_disable_extregs(struct cfb_info *cfb)
1108 {
1109 	if (cfb->func_use_count == 1) {
1110 		int old;
1111 
1112 		old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1113 		old &= ~EXT_FUNC_CTL_EXTREGENBL;
1114 		cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1115 	}
1116 
1117 	if (cfb->func_use_count == 0)
1118 		printk(KERN_ERR "disable_extregs: count = 0\n");
1119 	else
1120 		cfb->func_use_count -= 1;
1121 }
1122 EXPORT_SYMBOL(cyber2000fb_disable_extregs);
1123 
1124 /*
1125  * Attach a capture/tv driver to the core CyberX0X0 driver.
1126  */
1127 int cyber2000fb_attach(struct cyberpro_info *info, int idx)
1128 {
1129 	if (int_cfb_info != NULL) {
1130 		info->dev	      = int_cfb_info->fb.device;
1131 #ifdef CONFIG_FB_CYBER2000_I2C
1132 		info->i2c	      = &int_cfb_info->i2c_adapter;
1133 #else
1134 		info->i2c	      = NULL;
1135 #endif
1136 		info->regs	      = int_cfb_info->regs;
1137 		info->irq             = int_cfb_info->irq;
1138 		info->fb	      = int_cfb_info->fb.screen_base;
1139 		info->fb_size	      = int_cfb_info->fb.fix.smem_len;
1140 		info->info	      = int_cfb_info;
1141 
1142 		strlcpy(info->dev_name, int_cfb_info->fb.fix.id,
1143 			sizeof(info->dev_name));
1144 	}
1145 
1146 	return int_cfb_info != NULL;
1147 }
1148 EXPORT_SYMBOL(cyber2000fb_attach);
1149 
1150 /*
1151  * Detach a capture/tv driver from the core CyberX0X0 driver.
1152  */
1153 void cyber2000fb_detach(int idx)
1154 {
1155 }
1156 EXPORT_SYMBOL(cyber2000fb_detach);
1157 
1158 #ifdef CONFIG_FB_CYBER2000_DDC
1159 
1160 #define DDC_REG		0xb0
1161 #define DDC_SCL_OUT	(1 << 0)
1162 #define DDC_SDA_OUT	(1 << 4)
1163 #define DDC_SCL_IN	(1 << 2)
1164 #define DDC_SDA_IN	(1 << 6)
1165 
1166 static void cyber2000fb_enable_ddc(struct cfb_info *cfb)
1167 {
1168 	spin_lock(&cfb->reg_b0_lock);
1169 	cyber2000fb_writew(0x1bf, 0x3ce, cfb);
1170 }
1171 
1172 static void cyber2000fb_disable_ddc(struct cfb_info *cfb)
1173 {
1174 	cyber2000fb_writew(0x0bf, 0x3ce, cfb);
1175 	spin_unlock(&cfb->reg_b0_lock);
1176 }
1177 
1178 
1179 static void cyber2000fb_ddc_setscl(void *data, int val)
1180 {
1181 	struct cfb_info *cfb = data;
1182 	unsigned char reg;
1183 
1184 	cyber2000fb_enable_ddc(cfb);
1185 	reg = cyber2000_grphr(DDC_REG, cfb);
1186 	if (!val)	/* bit is inverted */
1187 		reg |= DDC_SCL_OUT;
1188 	else
1189 		reg &= ~DDC_SCL_OUT;
1190 	cyber2000_grphw(DDC_REG, reg, cfb);
1191 	cyber2000fb_disable_ddc(cfb);
1192 }
1193 
1194 static void cyber2000fb_ddc_setsda(void *data, int val)
1195 {
1196 	struct cfb_info *cfb = data;
1197 	unsigned char reg;
1198 
1199 	cyber2000fb_enable_ddc(cfb);
1200 	reg = cyber2000_grphr(DDC_REG, cfb);
1201 	if (!val)	/* bit is inverted */
1202 		reg |= DDC_SDA_OUT;
1203 	else
1204 		reg &= ~DDC_SDA_OUT;
1205 	cyber2000_grphw(DDC_REG, reg, cfb);
1206 	cyber2000fb_disable_ddc(cfb);
1207 }
1208 
1209 static int cyber2000fb_ddc_getscl(void *data)
1210 {
1211 	struct cfb_info *cfb = data;
1212 	int retval;
1213 
1214 	cyber2000fb_enable_ddc(cfb);
1215 	retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SCL_IN);
1216 	cyber2000fb_disable_ddc(cfb);
1217 
1218 	return retval;
1219 }
1220 
1221 static int cyber2000fb_ddc_getsda(void *data)
1222 {
1223 	struct cfb_info *cfb = data;
1224 	int retval;
1225 
1226 	cyber2000fb_enable_ddc(cfb);
1227 	retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SDA_IN);
1228 	cyber2000fb_disable_ddc(cfb);
1229 
1230 	return retval;
1231 }
1232 
1233 static int cyber2000fb_setup_ddc_bus(struct cfb_info *cfb)
1234 {
1235 	strlcpy(cfb->ddc_adapter.name, cfb->fb.fix.id,
1236 		sizeof(cfb->ddc_adapter.name));
1237 	cfb->ddc_adapter.owner		= THIS_MODULE;
1238 	cfb->ddc_adapter.class		= I2C_CLASS_DDC;
1239 	cfb->ddc_adapter.algo_data	= &cfb->ddc_algo;
1240 	cfb->ddc_adapter.dev.parent	= cfb->fb.device;
1241 	cfb->ddc_algo.setsda		= cyber2000fb_ddc_setsda;
1242 	cfb->ddc_algo.setscl		= cyber2000fb_ddc_setscl;
1243 	cfb->ddc_algo.getsda		= cyber2000fb_ddc_getsda;
1244 	cfb->ddc_algo.getscl		= cyber2000fb_ddc_getscl;
1245 	cfb->ddc_algo.udelay		= 10;
1246 	cfb->ddc_algo.timeout		= 20;
1247 	cfb->ddc_algo.data		= cfb;
1248 
1249 	i2c_set_adapdata(&cfb->ddc_adapter, cfb);
1250 
1251 	return i2c_bit_add_bus(&cfb->ddc_adapter);
1252 }
1253 #endif /* CONFIG_FB_CYBER2000_DDC */
1254 
1255 #ifdef CONFIG_FB_CYBER2000_I2C
1256 static void cyber2000fb_i2c_setsda(void *data, int state)
1257 {
1258 	struct cfb_info *cfb = data;
1259 	unsigned int latch2;
1260 
1261 	spin_lock(&cfb->reg_b0_lock);
1262 	latch2 = cyber2000_grphr(EXT_LATCH2, cfb);
1263 	latch2 &= EXT_LATCH2_I2C_CLKEN;
1264 	if (state)
1265 		latch2 |= EXT_LATCH2_I2C_DATEN;
1266 	cyber2000_grphw(EXT_LATCH2, latch2, cfb);
1267 	spin_unlock(&cfb->reg_b0_lock);
1268 }
1269 
1270 static void cyber2000fb_i2c_setscl(void *data, int state)
1271 {
1272 	struct cfb_info *cfb = data;
1273 	unsigned int latch2;
1274 
1275 	spin_lock(&cfb->reg_b0_lock);
1276 	latch2 = cyber2000_grphr(EXT_LATCH2, cfb);
1277 	latch2 &= EXT_LATCH2_I2C_DATEN;
1278 	if (state)
1279 		latch2 |= EXT_LATCH2_I2C_CLKEN;
1280 	cyber2000_grphw(EXT_LATCH2, latch2, cfb);
1281 	spin_unlock(&cfb->reg_b0_lock);
1282 }
1283 
1284 static int cyber2000fb_i2c_getsda(void *data)
1285 {
1286 	struct cfb_info *cfb = data;
1287 	int ret;
1288 
1289 	spin_lock(&cfb->reg_b0_lock);
1290 	ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_DAT);
1291 	spin_unlock(&cfb->reg_b0_lock);
1292 
1293 	return ret;
1294 }
1295 
1296 static int cyber2000fb_i2c_getscl(void *data)
1297 {
1298 	struct cfb_info *cfb = data;
1299 	int ret;
1300 
1301 	spin_lock(&cfb->reg_b0_lock);
1302 	ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_CLK);
1303 	spin_unlock(&cfb->reg_b0_lock);
1304 
1305 	return ret;
1306 }
1307 
1308 static int cyber2000fb_i2c_register(struct cfb_info *cfb)
1309 {
1310 	strlcpy(cfb->i2c_adapter.name, cfb->fb.fix.id,
1311 		sizeof(cfb->i2c_adapter.name));
1312 	cfb->i2c_adapter.owner = THIS_MODULE;
1313 	cfb->i2c_adapter.algo_data = &cfb->i2c_algo;
1314 	cfb->i2c_adapter.dev.parent = cfb->fb.device;
1315 	cfb->i2c_algo.setsda = cyber2000fb_i2c_setsda;
1316 	cfb->i2c_algo.setscl = cyber2000fb_i2c_setscl;
1317 	cfb->i2c_algo.getsda = cyber2000fb_i2c_getsda;
1318 	cfb->i2c_algo.getscl = cyber2000fb_i2c_getscl;
1319 	cfb->i2c_algo.udelay = 5;
1320 	cfb->i2c_algo.timeout = msecs_to_jiffies(100);
1321 	cfb->i2c_algo.data = cfb;
1322 
1323 	return i2c_bit_add_bus(&cfb->i2c_adapter);
1324 }
1325 
1326 static void cyber2000fb_i2c_unregister(struct cfb_info *cfb)
1327 {
1328 	i2c_del_adapter(&cfb->i2c_adapter);
1329 }
1330 #else
1331 #define cyber2000fb_i2c_register(cfb)	(0)
1332 #define cyber2000fb_i2c_unregister(cfb)	do { } while (0)
1333 #endif
1334 
1335 /*
1336  * These parameters give
1337  * 640x480, hsync 31.5kHz, vsync 60Hz
1338  */
1339 static struct fb_videomode cyber2000fb_default_mode = {
1340 	.refresh	= 60,
1341 	.xres		= 640,
1342 	.yres		= 480,
1343 	.pixclock	= 39722,
1344 	.left_margin	= 56,
1345 	.right_margin	= 16,
1346 	.upper_margin	= 34,
1347 	.lower_margin	= 9,
1348 	.hsync_len	= 88,
1349 	.vsync_len	= 2,
1350 	.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
1351 	.vmode		= FB_VMODE_NONINTERLACED
1352 };
1353 
1354 static char igs_regs[] = {
1355 	EXT_CRT_IRQ,		0,
1356 	EXT_CRT_TEST,		0,
1357 	EXT_SYNC_CTL,		0,
1358 	EXT_SEG_WRITE_PTR,	0,
1359 	EXT_SEG_READ_PTR,	0,
1360 	EXT_BIU_MISC,		EXT_BIU_MISC_LIN_ENABLE |
1361 				EXT_BIU_MISC_COP_ENABLE |
1362 				EXT_BIU_MISC_COP_BFC,
1363 	EXT_FUNC_CTL,		0,
1364 	CURS_H_START,		0,
1365 	CURS_H_START + 1,	0,
1366 	CURS_H_PRESET,		0,
1367 	CURS_V_START,		0,
1368 	CURS_V_START + 1,	0,
1369 	CURS_V_PRESET,		0,
1370 	CURS_CTL,		0,
1371 	EXT_ATTRIB_CTL,		EXT_ATTRIB_CTL_EXT,
1372 	EXT_OVERSCAN_RED,	0,
1373 	EXT_OVERSCAN_GREEN,	0,
1374 	EXT_OVERSCAN_BLUE,	0,
1375 
1376 	/* some of these are questionable when we have a BIOS */
1377 	EXT_MEM_CTL0,		EXT_MEM_CTL0_7CLK |
1378 				EXT_MEM_CTL0_RAS_1 |
1379 				EXT_MEM_CTL0_MULTCAS,
1380 	EXT_HIDDEN_CTL1,	0x30,
1381 	EXT_FIFO_CTL,		0x0b,
1382 	EXT_FIFO_CTL + 1,	0x17,
1383 	0x76,			0x00,
1384 	EXT_HIDDEN_CTL4,	0xc8
1385 };
1386 
1387 /*
1388  * Initialise the CyberPro hardware.  On the CyberPro5XXXX,
1389  * ensure that we're using the correct PLL (5XXX's may be
1390  * programmed to use an additional set of PLLs.)
1391  */
1392 static void cyberpro_init_hw(struct cfb_info *cfb)
1393 {
1394 	int i;
1395 
1396 	for (i = 0; i < sizeof(igs_regs); i += 2)
1397 		cyber2000_grphw(igs_regs[i], igs_regs[i + 1], cfb);
1398 
1399 	if (cfb->id == ID_CYBERPRO_5000) {
1400 		unsigned char val;
1401 		cyber2000fb_writeb(0xba, 0x3ce, cfb);
1402 		val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
1403 		cyber2000fb_writeb(val, 0x3cf, cfb);
1404 	}
1405 }
1406 
1407 static struct cfb_info *cyberpro_alloc_fb_info(unsigned int id, char *name)
1408 {
1409 	struct cfb_info *cfb;
1410 
1411 	cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL);
1412 	if (!cfb)
1413 		return NULL;
1414 
1415 
1416 	cfb->id			= id;
1417 
1418 	if (id == ID_CYBERPRO_5000)
1419 		cfb->ref_ps	= 40690; /* 24.576 MHz */
1420 	else
1421 		cfb->ref_ps	= 69842; /* 14.31818 MHz (69841?) */
1422 
1423 	cfb->divisors[0]	= 1;
1424 	cfb->divisors[1]	= 2;
1425 	cfb->divisors[2]	= 4;
1426 
1427 	if (id == ID_CYBERPRO_2000)
1428 		cfb->divisors[3] = 8;
1429 	else
1430 		cfb->divisors[3] = 6;
1431 
1432 	strcpy(cfb->fb.fix.id, name);
1433 
1434 	cfb->fb.fix.type	= FB_TYPE_PACKED_PIXELS;
1435 	cfb->fb.fix.type_aux	= 0;
1436 	cfb->fb.fix.xpanstep	= 0;
1437 	cfb->fb.fix.ypanstep	= 1;
1438 	cfb->fb.fix.ywrapstep	= 0;
1439 
1440 	switch (id) {
1441 	case ID_IGA_1682:
1442 		cfb->fb.fix.accel = 0;
1443 		break;
1444 
1445 	case ID_CYBERPRO_2000:
1446 		cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
1447 		break;
1448 
1449 	case ID_CYBERPRO_2010:
1450 		cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
1451 		break;
1452 
1453 	case ID_CYBERPRO_5000:
1454 		cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
1455 		break;
1456 	}
1457 
1458 	cfb->fb.var.nonstd	= 0;
1459 	cfb->fb.var.activate	= FB_ACTIVATE_NOW;
1460 	cfb->fb.var.height	= -1;
1461 	cfb->fb.var.width	= -1;
1462 	cfb->fb.var.accel_flags	= FB_ACCELF_TEXT;
1463 
1464 	cfb->fb.fbops		= &cyber2000fb_ops;
1465 	cfb->fb.flags		= FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
1466 	cfb->fb.pseudo_palette	= cfb->pseudo_palette;
1467 
1468 	spin_lock_init(&cfb->reg_b0_lock);
1469 
1470 	fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
1471 
1472 	return cfb;
1473 }
1474 
1475 static void cyberpro_free_fb_info(struct cfb_info *cfb)
1476 {
1477 	if (cfb) {
1478 		/*
1479 		 * Free the colourmap
1480 		 */
1481 		fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
1482 
1483 		kfree(cfb);
1484 	}
1485 }
1486 
1487 /*
1488  * Parse Cyber2000fb options.  Usage:
1489  *  video=cyber2000:font:fontname
1490  */
1491 #ifndef MODULE
1492 static int cyber2000fb_setup(char *options)
1493 {
1494 	char *opt;
1495 
1496 	if (!options || !*options)
1497 		return 0;
1498 
1499 	while ((opt = strsep(&options, ",")) != NULL) {
1500 		if (!*opt)
1501 			continue;
1502 
1503 		if (strncmp(opt, "font:", 5) == 0) {
1504 			static char default_font_storage[40];
1505 
1506 			strlcpy(default_font_storage, opt + 5,
1507 				sizeof(default_font_storage));
1508 			default_font = default_font_storage;
1509 			continue;
1510 		}
1511 
1512 		printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
1513 	}
1514 	return 0;
1515 }
1516 #endif  /*  MODULE  */
1517 
1518 /*
1519  * The CyberPro chips can be placed on many different bus types.
1520  * This probe function is common to all bus types.  The bus-specific
1521  * probe function is expected to have:
1522  *  - enabled access to the linear memory region
1523  *  - memory mapped access to the registers
1524  *  - initialised mem_ctl1 and mem_ctl2 appropriately.
1525  */
1526 static int cyberpro_common_probe(struct cfb_info *cfb)
1527 {
1528 	u_long smem_size;
1529 	u_int h_sync, v_sync;
1530 	int err;
1531 
1532 	cyberpro_init_hw(cfb);
1533 
1534 	/*
1535 	 * Get the video RAM size and width from the VGA register.
1536 	 * This should have been already initialised by the BIOS,
1537 	 * but if it's garbage, claim default 1MB VRAM (woody)
1538 	 */
1539 	cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
1540 	cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
1541 
1542 	/*
1543 	 * Determine the size of the memory.
1544 	 */
1545 	switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
1546 	case MEM_CTL2_SIZE_4MB:
1547 		smem_size = 0x00400000;
1548 		break;
1549 	case MEM_CTL2_SIZE_2MB:
1550 		smem_size = 0x00200000;
1551 		break;
1552 	case MEM_CTL2_SIZE_1MB:
1553 		smem_size = 0x00100000;
1554 		break;
1555 	default:
1556 		smem_size = 0x00100000;
1557 		break;
1558 	}
1559 
1560 	cfb->fb.fix.smem_len   = smem_size;
1561 	cfb->fb.fix.mmio_len   = MMIO_SIZE;
1562 	cfb->fb.screen_base    = cfb->region;
1563 
1564 #ifdef CONFIG_FB_CYBER2000_DDC
1565 	if (cyber2000fb_setup_ddc_bus(cfb) == 0)
1566 		cfb->ddc_registered = true;
1567 #endif
1568 
1569 	err = -EINVAL;
1570 	if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
1571 			  &cyber2000fb_default_mode, 8)) {
1572 		printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id);
1573 		goto failed;
1574 	}
1575 
1576 	cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
1577 			(cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
1578 
1579 	if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
1580 		cfb->fb.var.yres_virtual = cfb->fb.var.yres;
1581 
1582 /*	fb_set_var(&cfb->fb.var, -1, &cfb->fb); */
1583 
1584 	/*
1585 	 * Calculate the hsync and vsync frequencies.  Note that
1586 	 * we split the 1e12 constant up so that we can preserve
1587 	 * the precision and fit the results into 32-bit registers.
1588 	 *  (1953125000 * 512 = 1e12)
1589 	 */
1590 	h_sync = 1953125000 / cfb->fb.var.pixclock;
1591 	h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
1592 		 cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
1593 	v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
1594 		 cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
1595 
1596 	printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
1597 		cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
1598 		cfb->fb.var.xres, cfb->fb.var.yres,
1599 		h_sync / 1000, h_sync % 1000, v_sync);
1600 
1601 	err = cyber2000fb_i2c_register(cfb);
1602 	if (err)
1603 		goto failed;
1604 
1605 	err = register_framebuffer(&cfb->fb);
1606 	if (err)
1607 		cyber2000fb_i2c_unregister(cfb);
1608 
1609 failed:
1610 #ifdef CONFIG_FB_CYBER2000_DDC
1611 	if (err && cfb->ddc_registered)
1612 		i2c_del_adapter(&cfb->ddc_adapter);
1613 #endif
1614 	return err;
1615 }
1616 
1617 static void cyberpro_common_remove(struct cfb_info *cfb)
1618 {
1619 	unregister_framebuffer(&cfb->fb);
1620 #ifdef CONFIG_FB_CYBER2000_DDC
1621 	if (cfb->ddc_registered)
1622 		i2c_del_adapter(&cfb->ddc_adapter);
1623 #endif
1624 	cyber2000fb_i2c_unregister(cfb);
1625 }
1626 
1627 static void cyberpro_common_resume(struct cfb_info *cfb)
1628 {
1629 	cyberpro_init_hw(cfb);
1630 
1631 	/*
1632 	 * Reprogram the MEM_CTL1 and MEM_CTL2 registers
1633 	 */
1634 	cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
1635 	cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
1636 
1637 	/*
1638 	 * Restore the old video mode and the palette.
1639 	 * We also need to tell fbcon to redraw the console.
1640 	 */
1641 	cyber2000fb_set_par(&cfb->fb);
1642 }
1643 
1644 /*
1645  * PCI specific support.
1646  */
1647 #ifdef CONFIG_PCI
1648 /*
1649  * We need to wake up the CyberPro, and make sure its in linear memory
1650  * mode.  Unfortunately, this is specific to the platform and card that
1651  * we are running on.
1652  *
1653  * On x86 and ARM, should we be initialising the CyberPro first via the
1654  * IO registers, and then the MMIO registers to catch all cases?  Can we
1655  * end up in the situation where the chip is in MMIO mode, but not awake
1656  * on an x86 system?
1657  */
1658 static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
1659 {
1660 	unsigned char val;
1661 
1662 #if defined(__sparc_v9__)
1663 #error "You lose, consult DaveM."
1664 #elif defined(__sparc__)
1665 	/*
1666 	 * SPARC does not have an "outb" instruction, so we generate
1667 	 * I/O cycles storing into a reserved memory space at
1668 	 * physical address 0x3000000
1669 	 */
1670 	unsigned char __iomem *iop;
1671 
1672 	iop = ioremap(0x3000000, 0x5000);
1673 	if (iop == NULL) {
1674 		printk(KERN_ERR "iga5000: cannot map I/O\n");
1675 		return -ENOMEM;
1676 	}
1677 
1678 	writeb(0x18, iop + 0x46e8);
1679 	writeb(0x01, iop + 0x102);
1680 	writeb(0x08, iop + 0x46e8);
1681 	writeb(EXT_BIU_MISC, iop + 0x3ce);
1682 	writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
1683 
1684 	iounmap(iop);
1685 #else
1686 	/*
1687 	 * Most other machine types are "normal", so
1688 	 * we use the standard IO-based wakeup.
1689 	 */
1690 	outb(0x18, 0x46e8);
1691 	outb(0x01, 0x102);
1692 	outb(0x08, 0x46e8);
1693 	outb(EXT_BIU_MISC, 0x3ce);
1694 	outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
1695 #endif
1696 
1697 	/*
1698 	 * Allow the CyberPro to accept PCI burst accesses
1699 	 */
1700 	if (cfb->id == ID_CYBERPRO_2010) {
1701 		printk(KERN_INFO "%s: NOT enabling PCI bursts\n",
1702 		       cfb->fb.fix.id);
1703 	} else {
1704 		val = cyber2000_grphr(EXT_BUS_CTL, cfb);
1705 		if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
1706 			printk(KERN_INFO "%s: enabling PCI bursts\n",
1707 				cfb->fb.fix.id);
1708 
1709 			val |= EXT_BUS_CTL_PCIBURST_WRITE;
1710 
1711 			if (cfb->id == ID_CYBERPRO_5000)
1712 				val |= EXT_BUS_CTL_PCIBURST_READ;
1713 
1714 			cyber2000_grphw(EXT_BUS_CTL, val, cfb);
1715 		}
1716 	}
1717 
1718 	return 0;
1719 }
1720 
1721 static int cyberpro_pci_probe(struct pci_dev *dev,
1722 			      const struct pci_device_id *id)
1723 {
1724 	struct cfb_info *cfb;
1725 	char name[16];
1726 	int err;
1727 
1728 	sprintf(name, "CyberPro%4X", id->device);
1729 
1730 	err = pci_enable_device(dev);
1731 	if (err)
1732 		return err;
1733 
1734 	err = -ENOMEM;
1735 	cfb = cyberpro_alloc_fb_info(id->driver_data, name);
1736 	if (!cfb)
1737 		goto failed_release;
1738 
1739 	err = pci_request_regions(dev, cfb->fb.fix.id);
1740 	if (err)
1741 		goto failed_regions;
1742 
1743 	cfb->irq = dev->irq;
1744 	cfb->region = pci_ioremap_bar(dev, 0);
1745 	if (!cfb->region) {
1746 		err = -ENOMEM;
1747 		goto failed_ioremap;
1748 	}
1749 
1750 	cfb->regs = cfb->region + MMIO_OFFSET;
1751 	cfb->fb.device = &dev->dev;
1752 	cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
1753 	cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
1754 
1755 	/*
1756 	 * Bring up the hardware.  This is expected to enable access
1757 	 * to the linear memory region, and allow access to the memory
1758 	 * mapped registers.  Also, mem_ctl1 and mem_ctl2 must be
1759 	 * initialised.
1760 	 */
1761 	err = cyberpro_pci_enable_mmio(cfb);
1762 	if (err)
1763 		goto failed;
1764 
1765 	/*
1766 	 * Use MCLK from BIOS. FIXME: what about hotplug?
1767 	 */
1768 	cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
1769 	cfb->mclk_div  = cyber2000_grphr(EXT_MCLK_DIV, cfb);
1770 
1771 #ifdef __arm__
1772 	/*
1773 	 * MCLK on the NetWinder and the Shark is fixed at 75MHz
1774 	 */
1775 	if (machine_is_netwinder()) {
1776 		cfb->mclk_mult = 0xdb;
1777 		cfb->mclk_div  = 0x54;
1778 	}
1779 #endif
1780 
1781 	err = cyberpro_common_probe(cfb);
1782 	if (err)
1783 		goto failed;
1784 
1785 	/*
1786 	 * Our driver data
1787 	 */
1788 	pci_set_drvdata(dev, cfb);
1789 	if (int_cfb_info == NULL)
1790 		int_cfb_info = cfb;
1791 
1792 	return 0;
1793 
1794 failed:
1795 	iounmap(cfb->region);
1796 failed_ioremap:
1797 	pci_release_regions(dev);
1798 failed_regions:
1799 	cyberpro_free_fb_info(cfb);
1800 failed_release:
1801 	return err;
1802 }
1803 
1804 static void cyberpro_pci_remove(struct pci_dev *dev)
1805 {
1806 	struct cfb_info *cfb = pci_get_drvdata(dev);
1807 
1808 	if (cfb) {
1809 		cyberpro_common_remove(cfb);
1810 		iounmap(cfb->region);
1811 		cyberpro_free_fb_info(cfb);
1812 
1813 		if (cfb == int_cfb_info)
1814 			int_cfb_info = NULL;
1815 
1816 		pci_release_regions(dev);
1817 	}
1818 }
1819 
1820 static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state)
1821 {
1822 	return 0;
1823 }
1824 
1825 /*
1826  * Re-initialise the CyberPro hardware
1827  */
1828 static int cyberpro_pci_resume(struct pci_dev *dev)
1829 {
1830 	struct cfb_info *cfb = pci_get_drvdata(dev);
1831 
1832 	if (cfb) {
1833 		cyberpro_pci_enable_mmio(cfb);
1834 		cyberpro_common_resume(cfb);
1835 	}
1836 
1837 	return 0;
1838 }
1839 
1840 static struct pci_device_id cyberpro_pci_table[] = {
1841 /*	Not yet
1842  *	{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
1843  *		PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
1844  */
1845 	{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
1846 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
1847 	{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
1848 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
1849 	{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
1850 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
1851 	{ 0, }
1852 };
1853 
1854 MODULE_DEVICE_TABLE(pci, cyberpro_pci_table);
1855 
1856 static struct pci_driver cyberpro_driver = {
1857 	.name		= "CyberPro",
1858 	.probe		= cyberpro_pci_probe,
1859 	.remove		= cyberpro_pci_remove,
1860 	.suspend	= cyberpro_pci_suspend,
1861 	.resume		= cyberpro_pci_resume,
1862 	.id_table	= cyberpro_pci_table
1863 };
1864 #endif
1865 
1866 /*
1867  * I don't think we can use the "module_init" stuff here because
1868  * the fbcon stuff may not be initialised yet.  Hence the #ifdef
1869  * around module_init.
1870  *
1871  * Tony: "module_init" is now required
1872  */
1873 static int __init cyber2000fb_init(void)
1874 {
1875 	int ret = -1, err;
1876 
1877 #ifndef MODULE
1878 	char *option = NULL;
1879 
1880 	if (fb_get_options("cyber2000fb", &option))
1881 		return -ENODEV;
1882 	cyber2000fb_setup(option);
1883 #endif
1884 
1885 	err = pci_register_driver(&cyberpro_driver);
1886 	if (!err)
1887 		ret = 0;
1888 
1889 	return ret ? err : 0;
1890 }
1891 module_init(cyber2000fb_init);
1892 
1893 static void __exit cyberpro_exit(void)
1894 {
1895 	pci_unregister_driver(&cyberpro_driver);
1896 }
1897 module_exit(cyberpro_exit);
1898 
1899 MODULE_AUTHOR("Russell King");
1900 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
1901 MODULE_LICENSE("GPL");
1902