1 /* 2 * linux/drivers/video/cyber2000fb.c 3 * 4 * Copyright (C) 1998-2002 Russell King 5 * 6 * MIPS and 50xx clock support 7 * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com> 8 * 9 * 32 bit support, text color and panning fixes for modes != 8 bit 10 * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org> 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License version 2 as 14 * published by the Free Software Foundation. 15 * 16 * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device 17 * 18 * Based on cyberfb.c. 19 * 20 * Note that we now use the new fbcon fix, var and cmap scheme. We do 21 * still have to check which console is the currently displayed one 22 * however, especially for the colourmap stuff. 23 * 24 * We also use the new hotplug PCI subsystem. I'm not sure if there 25 * are any such cards, but I'm erring on the side of caution. We don't 26 * want to go pop just because someone does have one. 27 * 28 * Note that this doesn't work fully in the case of multiple CyberPro 29 * cards with grabbers. We currently can only attach to the first 30 * CyberPro card found. 31 * 32 * When we're in truecolour mode, we power down the LUT RAM as a power 33 * saving feature. Also, when we enter any of the powersaving modes 34 * (except soft blanking) we power down the RAMDACs. This saves about 35 * 1W, which is roughly 8% of the power consumption of a NetWinder 36 * (which, incidentally, is about the same saving as a 2.5in hard disk 37 * entering standby mode.) 38 */ 39 #include <linux/module.h> 40 #include <linux/kernel.h> 41 #include <linux/errno.h> 42 #include <linux/string.h> 43 #include <linux/mm.h> 44 #include <linux/slab.h> 45 #include <linux/delay.h> 46 #include <linux/fb.h> 47 #include <linux/pci.h> 48 #include <linux/init.h> 49 #include <linux/io.h> 50 #include <linux/i2c.h> 51 #include <linux/i2c-algo-bit.h> 52 53 #include <asm/pgtable.h> 54 55 #ifdef __arm__ 56 #include <asm/mach-types.h> 57 #endif 58 59 #include "cyber2000fb.h" 60 61 struct cfb_info { 62 struct fb_info fb; 63 struct display_switch *dispsw; 64 struct display *display; 65 unsigned char __iomem *region; 66 unsigned char __iomem *regs; 67 u_int id; 68 u_int irq; 69 int func_use_count; 70 u_long ref_ps; 71 72 /* 73 * Clock divisors 74 */ 75 u_int divisors[4]; 76 77 struct { 78 u8 red, green, blue; 79 } palette[NR_PALETTE]; 80 81 u_char mem_ctl1; 82 u_char mem_ctl2; 83 u_char mclk_mult; 84 u_char mclk_div; 85 /* 86 * RAMDAC control register is both of these or'ed together 87 */ 88 u_char ramdac_ctrl; 89 u_char ramdac_powerdown; 90 91 u32 pseudo_palette[16]; 92 93 spinlock_t reg_b0_lock; 94 95 #ifdef CONFIG_FB_CYBER2000_DDC 96 bool ddc_registered; 97 struct i2c_adapter ddc_adapter; 98 struct i2c_algo_bit_data ddc_algo; 99 #endif 100 101 #ifdef CONFIG_FB_CYBER2000_I2C 102 struct i2c_adapter i2c_adapter; 103 struct i2c_algo_bit_data i2c_algo; 104 #endif 105 }; 106 107 static char *default_font = "Acorn8x8"; 108 module_param(default_font, charp, 0); 109 MODULE_PARM_DESC(default_font, "Default font name"); 110 111 /* 112 * Our access methods. 113 */ 114 #define cyber2000fb_writel(val, reg, cfb) writel(val, (cfb)->regs + (reg)) 115 #define cyber2000fb_writew(val, reg, cfb) writew(val, (cfb)->regs + (reg)) 116 #define cyber2000fb_writeb(val, reg, cfb) writeb(val, (cfb)->regs + (reg)) 117 118 #define cyber2000fb_readb(reg, cfb) readb((cfb)->regs + (reg)) 119 120 static inline void 121 cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 122 { 123 cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb); 124 } 125 126 static inline void 127 cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 128 { 129 cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb); 130 } 131 132 static inline unsigned int 133 cyber2000_grphr(unsigned int reg, struct cfb_info *cfb) 134 { 135 cyber2000fb_writeb(reg, 0x3ce, cfb); 136 return cyber2000fb_readb(0x3cf, cfb); 137 } 138 139 static inline void 140 cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 141 { 142 cyber2000fb_readb(0x3da, cfb); 143 cyber2000fb_writeb(reg, 0x3c0, cfb); 144 cyber2000fb_readb(0x3c1, cfb); 145 cyber2000fb_writeb(val, 0x3c0, cfb); 146 } 147 148 static inline void 149 cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 150 { 151 cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb); 152 } 153 154 /* -------------------- Hardware specific routines ------------------------- */ 155 156 /* 157 * Hardware Cyber2000 Acceleration 158 */ 159 static void 160 cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 161 { 162 struct cfb_info *cfb = (struct cfb_info *)info; 163 unsigned long dst, col; 164 165 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { 166 cfb_fillrect(info, rect); 167 return; 168 } 169 170 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); 171 cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb); 172 cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb); 173 174 col = rect->color; 175 if (cfb->fb.var.bits_per_pixel > 8) 176 col = ((u32 *)cfb->fb.pseudo_palette)[col]; 177 cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb); 178 179 dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual; 180 if (cfb->fb.var.bits_per_pixel == 24) { 181 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); 182 dst *= 3; 183 } 184 185 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); 186 cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); 187 cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb); 188 cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb); 189 } 190 191 static void 192 cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region) 193 { 194 struct cfb_info *cfb = (struct cfb_info *)info; 195 unsigned int cmd = CO_CMD_L_PATTERN_FGCOL; 196 unsigned long src, dst; 197 198 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { 199 cfb_copyarea(info, region); 200 return; 201 } 202 203 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); 204 cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb); 205 cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb); 206 207 src = region->sx + region->sy * cfb->fb.var.xres_virtual; 208 dst = region->dx + region->dy * cfb->fb.var.xres_virtual; 209 210 if (region->sx < region->dx) { 211 src += region->width - 1; 212 dst += region->width - 1; 213 cmd |= CO_CMD_L_INC_LEFT; 214 } 215 216 if (region->sy < region->dy) { 217 src += (region->height - 1) * cfb->fb.var.xres_virtual; 218 dst += (region->height - 1) * cfb->fb.var.xres_virtual; 219 cmd |= CO_CMD_L_INC_UP; 220 } 221 222 if (cfb->fb.var.bits_per_pixel == 24) { 223 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); 224 src *= 3; 225 dst *= 3; 226 } 227 cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb); 228 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); 229 cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); 230 cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb); 231 cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER, 232 CO_REG_CMD_H, cfb); 233 } 234 235 static void 236 cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image) 237 { 238 cfb_imageblit(info, image); 239 return; 240 } 241 242 static int cyber2000fb_sync(struct fb_info *info) 243 { 244 struct cfb_info *cfb = (struct cfb_info *)info; 245 int count = 100000; 246 247 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) 248 return 0; 249 250 while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) { 251 if (!count--) { 252 debug_printf("accel_wait timed out\n"); 253 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); 254 break; 255 } 256 udelay(1); 257 } 258 return 0; 259 } 260 261 /* 262 * =========================================================================== 263 */ 264 265 static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf) 266 { 267 u_int mask = (1 << bf->length) - 1; 268 269 return (val >> (16 - bf->length) & mask) << bf->offset; 270 } 271 272 /* 273 * Set a single color register. Return != 0 for invalid regno. 274 */ 275 static int 276 cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 277 u_int transp, struct fb_info *info) 278 { 279 struct cfb_info *cfb = (struct cfb_info *)info; 280 struct fb_var_screeninfo *var = &cfb->fb.var; 281 u32 pseudo_val; 282 int ret = 1; 283 284 switch (cfb->fb.fix.visual) { 285 default: 286 return 1; 287 288 /* 289 * Pseudocolour: 290 * 8 8 291 * pixel --/--+--/--> red lut --> red dac 292 * | 8 293 * +--/--> green lut --> green dac 294 * | 8 295 * +--/--> blue lut --> blue dac 296 */ 297 case FB_VISUAL_PSEUDOCOLOR: 298 if (regno >= NR_PALETTE) 299 return 1; 300 301 red >>= 8; 302 green >>= 8; 303 blue >>= 8; 304 305 cfb->palette[regno].red = red; 306 cfb->palette[regno].green = green; 307 cfb->palette[regno].blue = blue; 308 309 cyber2000fb_writeb(regno, 0x3c8, cfb); 310 cyber2000fb_writeb(red, 0x3c9, cfb); 311 cyber2000fb_writeb(green, 0x3c9, cfb); 312 cyber2000fb_writeb(blue, 0x3c9, cfb); 313 return 0; 314 315 /* 316 * Direct colour: 317 * n rl 318 * pixel --/--+--/--> red lut --> red dac 319 * | gl 320 * +--/--> green lut --> green dac 321 * | bl 322 * +--/--> blue lut --> blue dac 323 * n = bpp, rl = red length, gl = green length, bl = blue length 324 */ 325 case FB_VISUAL_DIRECTCOLOR: 326 red >>= 8; 327 green >>= 8; 328 blue >>= 8; 329 330 if (var->green.length == 6 && regno < 64) { 331 cfb->palette[regno << 2].green = green; 332 333 /* 334 * The 6 bits of the green component are applied 335 * to the high 6 bits of the LUT. 336 */ 337 cyber2000fb_writeb(regno << 2, 0x3c8, cfb); 338 cyber2000fb_writeb(cfb->palette[regno >> 1].red, 339 0x3c9, cfb); 340 cyber2000fb_writeb(green, 0x3c9, cfb); 341 cyber2000fb_writeb(cfb->palette[regno >> 1].blue, 342 0x3c9, cfb); 343 344 green = cfb->palette[regno << 3].green; 345 346 ret = 0; 347 } 348 349 if (var->green.length >= 5 && regno < 32) { 350 cfb->palette[regno << 3].red = red; 351 cfb->palette[regno << 3].green = green; 352 cfb->palette[regno << 3].blue = blue; 353 354 /* 355 * The 5 bits of each colour component are 356 * applied to the high 5 bits of the LUT. 357 */ 358 cyber2000fb_writeb(regno << 3, 0x3c8, cfb); 359 cyber2000fb_writeb(red, 0x3c9, cfb); 360 cyber2000fb_writeb(green, 0x3c9, cfb); 361 cyber2000fb_writeb(blue, 0x3c9, cfb); 362 ret = 0; 363 } 364 365 if (var->green.length == 4 && regno < 16) { 366 cfb->palette[regno << 4].red = red; 367 cfb->palette[regno << 4].green = green; 368 cfb->palette[regno << 4].blue = blue; 369 370 /* 371 * The 5 bits of each colour component are 372 * applied to the high 5 bits of the LUT. 373 */ 374 cyber2000fb_writeb(regno << 4, 0x3c8, cfb); 375 cyber2000fb_writeb(red, 0x3c9, cfb); 376 cyber2000fb_writeb(green, 0x3c9, cfb); 377 cyber2000fb_writeb(blue, 0x3c9, cfb); 378 ret = 0; 379 } 380 381 /* 382 * Since this is only used for the first 16 colours, we 383 * don't have to care about overflowing for regno >= 32 384 */ 385 pseudo_val = regno << var->red.offset | 386 regno << var->green.offset | 387 regno << var->blue.offset; 388 break; 389 390 /* 391 * True colour: 392 * n rl 393 * pixel --/--+--/--> red dac 394 * | gl 395 * +--/--> green dac 396 * | bl 397 * +--/--> blue dac 398 * n = bpp, rl = red length, gl = green length, bl = blue length 399 */ 400 case FB_VISUAL_TRUECOLOR: 401 pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp); 402 pseudo_val |= convert_bitfield(red, &var->red); 403 pseudo_val |= convert_bitfield(green, &var->green); 404 pseudo_val |= convert_bitfield(blue, &var->blue); 405 ret = 0; 406 break; 407 } 408 409 /* 410 * Now set our pseudo palette for the CFB16/24/32 drivers. 411 */ 412 if (regno < 16) 413 ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val; 414 415 return ret; 416 } 417 418 struct par_info { 419 /* 420 * Hardware 421 */ 422 u_char clock_mult; 423 u_char clock_div; 424 u_char extseqmisc; 425 u_char co_pixfmt; 426 u_char crtc_ofl; 427 u_char crtc[19]; 428 u_int width; 429 u_int pitch; 430 u_int fetch; 431 432 /* 433 * Other 434 */ 435 u_char ramdac; 436 }; 437 438 static const u_char crtc_idx[] = { 439 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 440 0x08, 0x09, 441 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18 442 }; 443 444 static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb) 445 { 446 unsigned int i; 447 unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown; 448 449 cyber2000fb_writeb(0x56, 0x3ce, cfb); 450 i = cyber2000fb_readb(0x3cf, cfb); 451 cyber2000fb_writeb(i | 4, 0x3cf, cfb); 452 cyber2000fb_writeb(val, 0x3c6, cfb); 453 cyber2000fb_writeb(i, 0x3cf, cfb); 454 /* prevent card lock-up observed on x86 with CyberPro 2000 */ 455 cyber2000fb_readb(0x3cf, cfb); 456 } 457 458 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw) 459 { 460 u_int i; 461 462 /* 463 * Blank palette 464 */ 465 for (i = 0; i < NR_PALETTE; i++) { 466 cyber2000fb_writeb(i, 0x3c8, cfb); 467 cyber2000fb_writeb(0, 0x3c9, cfb); 468 cyber2000fb_writeb(0, 0x3c9, cfb); 469 cyber2000fb_writeb(0, 0x3c9, cfb); 470 } 471 472 cyber2000fb_writeb(0xef, 0x3c2, cfb); 473 cyber2000_crtcw(0x11, 0x0b, cfb); 474 cyber2000_attrw(0x11, 0x00, cfb); 475 476 cyber2000_seqw(0x00, 0x01, cfb); 477 cyber2000_seqw(0x01, 0x01, cfb); 478 cyber2000_seqw(0x02, 0x0f, cfb); 479 cyber2000_seqw(0x03, 0x00, cfb); 480 cyber2000_seqw(0x04, 0x0e, cfb); 481 cyber2000_seqw(0x00, 0x03, cfb); 482 483 for (i = 0; i < sizeof(crtc_idx); i++) 484 cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb); 485 486 for (i = 0x0a; i < 0x10; i++) 487 cyber2000_crtcw(i, 0, cfb); 488 489 cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb); 490 cyber2000_grphw(0x00, 0x00, cfb); 491 cyber2000_grphw(0x01, 0x00, cfb); 492 cyber2000_grphw(0x02, 0x00, cfb); 493 cyber2000_grphw(0x03, 0x00, cfb); 494 cyber2000_grphw(0x04, 0x00, cfb); 495 cyber2000_grphw(0x05, 0x60, cfb); 496 cyber2000_grphw(0x06, 0x05, cfb); 497 cyber2000_grphw(0x07, 0x0f, cfb); 498 cyber2000_grphw(0x08, 0xff, cfb); 499 500 /* Attribute controller registers */ 501 for (i = 0; i < 16; i++) 502 cyber2000_attrw(i, i, cfb); 503 504 cyber2000_attrw(0x10, 0x01, cfb); 505 cyber2000_attrw(0x11, 0x00, cfb); 506 cyber2000_attrw(0x12, 0x0f, cfb); 507 cyber2000_attrw(0x13, 0x00, cfb); 508 cyber2000_attrw(0x14, 0x00, cfb); 509 510 /* PLL registers */ 511 spin_lock(&cfb->reg_b0_lock); 512 cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb); 513 cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb); 514 cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb); 515 cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb); 516 cyber2000_grphw(0x90, 0x01, cfb); 517 cyber2000_grphw(0xb9, 0x80, cfb); 518 cyber2000_grphw(0xb9, 0x00, cfb); 519 spin_unlock(&cfb->reg_b0_lock); 520 521 cfb->ramdac_ctrl = hw->ramdac; 522 cyber2000fb_write_ramdac_ctrl(cfb); 523 524 cyber2000fb_writeb(0x20, 0x3c0, cfb); 525 cyber2000fb_writeb(0xff, 0x3c6, cfb); 526 527 cyber2000_grphw(0x14, hw->fetch, cfb); 528 cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) | 529 ((hw->pitch >> 4) & 0x30), cfb); 530 cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb); 531 532 /* 533 * Set up accelerator registers 534 */ 535 cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb); 536 cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb); 537 cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb); 538 } 539 540 static inline int 541 cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var) 542 { 543 u_int base = var->yoffset * var->xres_virtual + var->xoffset; 544 545 base *= var->bits_per_pixel; 546 547 /* 548 * Convert to bytes and shift two extra bits because DAC 549 * can only start on 4 byte aligned data. 550 */ 551 base >>= 5; 552 553 if (base >= 1 << 20) 554 return -EINVAL; 555 556 cyber2000_grphw(0x10, base >> 16 | 0x10, cfb); 557 cyber2000_crtcw(0x0c, base >> 8, cfb); 558 cyber2000_crtcw(0x0d, base, cfb); 559 560 return 0; 561 } 562 563 static int 564 cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb, 565 struct fb_var_screeninfo *var) 566 { 567 u_int Htotal, Hblankend, Hsyncend; 568 u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend; 569 #define ENCODE_BIT(v, b1, m, b2) ((((v) >> (b1)) & (m)) << (b2)) 570 571 hw->crtc[13] = hw->pitch; 572 hw->crtc[17] = 0xe3; 573 hw->crtc[14] = 0; 574 hw->crtc[8] = 0; 575 576 Htotal = var->xres + var->right_margin + 577 var->hsync_len + var->left_margin; 578 579 if (Htotal > 2080) 580 return -EINVAL; 581 582 hw->crtc[0] = (Htotal >> 3) - 5; 583 hw->crtc[1] = (var->xres >> 3) - 1; 584 hw->crtc[2] = var->xres >> 3; 585 hw->crtc[4] = (var->xres + var->right_margin) >> 3; 586 587 Hblankend = (Htotal - 4 * 8) >> 3; 588 589 hw->crtc[3] = ENCODE_BIT(Hblankend, 0, 0x1f, 0) | 590 ENCODE_BIT(1, 0, 0x01, 7); 591 592 Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3; 593 594 hw->crtc[5] = ENCODE_BIT(Hsyncend, 0, 0x1f, 0) | 595 ENCODE_BIT(Hblankend, 5, 0x01, 7); 596 597 Vdispend = var->yres - 1; 598 Vsyncstart = var->yres + var->lower_margin; 599 Vsyncend = var->yres + var->lower_margin + var->vsync_len; 600 Vtotal = var->yres + var->lower_margin + var->vsync_len + 601 var->upper_margin - 2; 602 603 if (Vtotal > 2047) 604 return -EINVAL; 605 606 Vblankstart = var->yres + 6; 607 Vblankend = Vtotal - 10; 608 609 hw->crtc[6] = Vtotal; 610 hw->crtc[7] = ENCODE_BIT(Vtotal, 8, 0x01, 0) | 611 ENCODE_BIT(Vdispend, 8, 0x01, 1) | 612 ENCODE_BIT(Vsyncstart, 8, 0x01, 2) | 613 ENCODE_BIT(Vblankstart, 8, 0x01, 3) | 614 ENCODE_BIT(1, 0, 0x01, 4) | 615 ENCODE_BIT(Vtotal, 9, 0x01, 5) | 616 ENCODE_BIT(Vdispend, 9, 0x01, 6) | 617 ENCODE_BIT(Vsyncstart, 9, 0x01, 7); 618 hw->crtc[9] = ENCODE_BIT(0, 0, 0x1f, 0) | 619 ENCODE_BIT(Vblankstart, 9, 0x01, 5) | 620 ENCODE_BIT(1, 0, 0x01, 6); 621 hw->crtc[10] = Vsyncstart; 622 hw->crtc[11] = ENCODE_BIT(Vsyncend, 0, 0x0f, 0) | 623 ENCODE_BIT(1, 0, 0x01, 7); 624 hw->crtc[12] = Vdispend; 625 hw->crtc[15] = Vblankstart; 626 hw->crtc[16] = Vblankend; 627 hw->crtc[18] = 0xff; 628 629 /* 630 * overflow - graphics reg 0x11 631 * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10 632 * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT 633 */ 634 hw->crtc_ofl = 635 ENCODE_BIT(Vtotal, 10, 0x01, 0) | 636 ENCODE_BIT(Vdispend, 10, 0x01, 1) | 637 ENCODE_BIT(Vsyncstart, 10, 0x01, 2) | 638 ENCODE_BIT(Vblankstart, 10, 0x01, 3) | 639 EXT_CRT_VRTOFL_LINECOMP10; 640 641 /* woody: set the interlaced bit... */ 642 /* FIXME: what about doublescan? */ 643 if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) 644 hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE; 645 646 return 0; 647 } 648 649 /* 650 * The following was discovered by a good monitor, bit twiddling, theorising 651 * and but mostly luck. Strangely, it looks like everyone elses' PLL! 652 * 653 * Clock registers: 654 * fclock = fpll / div2 655 * fpll = fref * mult / div1 656 * where: 657 * fref = 14.318MHz (69842ps) 658 * mult = reg0xb0.7:0 659 * div1 = (reg0xb1.5:0 + 1) 660 * div2 = 2^(reg0xb1.7:6) 661 * fpll should be between 115 and 260 MHz 662 * (8696ps and 3846ps) 663 */ 664 static int 665 cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb, 666 struct fb_var_screeninfo *var) 667 { 668 u_long pll_ps = var->pixclock; 669 const u_long ref_ps = cfb->ref_ps; 670 u_int div2, t_div1, best_div1, best_mult; 671 int best_diff; 672 int vco; 673 674 /* 675 * Step 1: 676 * find div2 such that 115MHz < fpll < 260MHz 677 * and 0 <= div2 < 4 678 */ 679 for (div2 = 0; div2 < 4; div2++) { 680 u_long new_pll; 681 682 new_pll = pll_ps / cfb->divisors[div2]; 683 if (8696 > new_pll && new_pll > 3846) { 684 pll_ps = new_pll; 685 break; 686 } 687 } 688 689 if (div2 == 4) 690 return -EINVAL; 691 692 /* 693 * Step 2: 694 * Given pll_ps and ref_ps, find: 695 * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005 696 * where { 1 < best_div1 < 32, 1 < best_mult < 256 } 697 * pll_ps_calc = best_div1 / (ref_ps * best_mult) 698 */ 699 best_diff = 0x7fffffff; 700 best_mult = 2; 701 best_div1 = 32; 702 for (t_div1 = 2; t_div1 < 32; t_div1 += 1) { 703 u_int rr, t_mult, t_pll_ps; 704 int diff; 705 706 /* 707 * Find the multiplier for this divisor 708 */ 709 rr = ref_ps * t_div1; 710 t_mult = (rr + pll_ps / 2) / pll_ps; 711 712 /* 713 * Is the multiplier within the correct range? 714 */ 715 if (t_mult > 256 || t_mult < 2) 716 continue; 717 718 /* 719 * Calculate the actual clock period from this multiplier 720 * and divisor, and estimate the error. 721 */ 722 t_pll_ps = (rr + t_mult / 2) / t_mult; 723 diff = pll_ps - t_pll_ps; 724 if (diff < 0) 725 diff = -diff; 726 727 if (diff < best_diff) { 728 best_diff = diff; 729 best_mult = t_mult; 730 best_div1 = t_div1; 731 } 732 733 /* 734 * If we hit an exact value, there is no point in continuing. 735 */ 736 if (diff == 0) 737 break; 738 } 739 740 /* 741 * Step 3: 742 * combine values 743 */ 744 hw->clock_mult = best_mult - 1; 745 hw->clock_div = div2 << 6 | (best_div1 - 1); 746 747 vco = ref_ps * best_div1 / best_mult; 748 if ((ref_ps == 40690) && (vco < 5556)) 749 /* Set VFSEL when VCO > 180MHz (5.556 ps). */ 750 hw->clock_div |= EXT_DCLK_DIV_VFSEL; 751 752 return 0; 753 } 754 755 /* 756 * Set the User Defined Part of the Display 757 */ 758 static int 759 cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) 760 { 761 struct cfb_info *cfb = (struct cfb_info *)info; 762 struct par_info hw; 763 unsigned int mem; 764 int err; 765 766 var->transp.msb_right = 0; 767 var->red.msb_right = 0; 768 var->green.msb_right = 0; 769 var->blue.msb_right = 0; 770 var->transp.offset = 0; 771 var->transp.length = 0; 772 773 switch (var->bits_per_pixel) { 774 case 8: /* PSEUDOCOLOUR, 256 */ 775 var->red.offset = 0; 776 var->red.length = 8; 777 var->green.offset = 0; 778 var->green.length = 8; 779 var->blue.offset = 0; 780 var->blue.length = 8; 781 break; 782 783 case 16:/* DIRECTCOLOUR, 64k or 32k */ 784 switch (var->green.length) { 785 case 6: /* RGB565, 64k */ 786 var->red.offset = 11; 787 var->red.length = 5; 788 var->green.offset = 5; 789 var->green.length = 6; 790 var->blue.offset = 0; 791 var->blue.length = 5; 792 break; 793 794 default: 795 case 5: /* RGB555, 32k */ 796 var->red.offset = 10; 797 var->red.length = 5; 798 var->green.offset = 5; 799 var->green.length = 5; 800 var->blue.offset = 0; 801 var->blue.length = 5; 802 break; 803 804 case 4: /* RGB444, 4k + transparency? */ 805 var->transp.offset = 12; 806 var->transp.length = 4; 807 var->red.offset = 8; 808 var->red.length = 4; 809 var->green.offset = 4; 810 var->green.length = 4; 811 var->blue.offset = 0; 812 var->blue.length = 4; 813 break; 814 } 815 break; 816 817 case 24:/* TRUECOLOUR, 16m */ 818 var->red.offset = 16; 819 var->red.length = 8; 820 var->green.offset = 8; 821 var->green.length = 8; 822 var->blue.offset = 0; 823 var->blue.length = 8; 824 break; 825 826 case 32:/* TRUECOLOUR, 16m */ 827 var->transp.offset = 24; 828 var->transp.length = 8; 829 var->red.offset = 16; 830 var->red.length = 8; 831 var->green.offset = 8; 832 var->green.length = 8; 833 var->blue.offset = 0; 834 var->blue.length = 8; 835 break; 836 837 default: 838 return -EINVAL; 839 } 840 841 mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8); 842 if (mem > cfb->fb.fix.smem_len) 843 var->yres_virtual = cfb->fb.fix.smem_len * 8 / 844 (var->bits_per_pixel * var->xres_virtual); 845 846 if (var->yres > var->yres_virtual) 847 var->yres = var->yres_virtual; 848 if (var->xres > var->xres_virtual) 849 var->xres = var->xres_virtual; 850 851 err = cyber2000fb_decode_clock(&hw, cfb, var); 852 if (err) 853 return err; 854 855 err = cyber2000fb_decode_crtc(&hw, cfb, var); 856 if (err) 857 return err; 858 859 return 0; 860 } 861 862 static int cyber2000fb_set_par(struct fb_info *info) 863 { 864 struct cfb_info *cfb = (struct cfb_info *)info; 865 struct fb_var_screeninfo *var = &cfb->fb.var; 866 struct par_info hw; 867 unsigned int mem; 868 869 hw.width = var->xres_virtual; 870 hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT; 871 872 switch (var->bits_per_pixel) { 873 case 8: 874 hw.co_pixfmt = CO_PIXFMT_8BPP; 875 hw.pitch = hw.width >> 3; 876 hw.extseqmisc = EXT_SEQ_MISC_8; 877 break; 878 879 case 16: 880 hw.co_pixfmt = CO_PIXFMT_16BPP; 881 hw.pitch = hw.width >> 2; 882 883 switch (var->green.length) { 884 case 6: /* RGB565, 64k */ 885 hw.extseqmisc = EXT_SEQ_MISC_16_RGB565; 886 break; 887 case 5: /* RGB555, 32k */ 888 hw.extseqmisc = EXT_SEQ_MISC_16_RGB555; 889 break; 890 case 4: /* RGB444, 4k + transparency? */ 891 hw.extseqmisc = EXT_SEQ_MISC_16_RGB444; 892 break; 893 default: 894 BUG(); 895 } 896 break; 897 898 case 24:/* TRUECOLOUR, 16m */ 899 hw.co_pixfmt = CO_PIXFMT_24BPP; 900 hw.width *= 3; 901 hw.pitch = hw.width >> 3; 902 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); 903 hw.extseqmisc = EXT_SEQ_MISC_24_RGB888; 904 break; 905 906 case 32:/* TRUECOLOUR, 16m */ 907 hw.co_pixfmt = CO_PIXFMT_32BPP; 908 hw.pitch = hw.width >> 1; 909 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); 910 hw.extseqmisc = EXT_SEQ_MISC_32; 911 break; 912 913 default: 914 BUG(); 915 } 916 917 /* 918 * Sigh, this is absolutely disgusting, but caused by 919 * the way the fbcon developers want to separate out 920 * the "checking" and the "setting" of the video mode. 921 * 922 * If the mode is not suitable for the hardware here, 923 * we can't prevent it being set by returning an error. 924 * 925 * In theory, since NetWinders contain just one VGA card, 926 * we should never end up hitting this problem. 927 */ 928 BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0); 929 BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0); 930 931 hw.width -= 1; 932 hw.fetch = hw.pitch; 933 if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT)) 934 hw.fetch <<= 1; 935 hw.fetch += 1; 936 937 cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; 938 939 /* 940 * Same here - if the size of the video mode exceeds the 941 * available RAM, we can't prevent this mode being set. 942 * 943 * In theory, since NetWinders contain just one VGA card, 944 * we should never end up hitting this problem. 945 */ 946 mem = cfb->fb.fix.line_length * var->yres_virtual; 947 BUG_ON(mem > cfb->fb.fix.smem_len); 948 949 /* 950 * 8bpp displays are always pseudo colour. 16bpp and above 951 * are direct colour or true colour, depending on whether 952 * the RAMDAC palettes are bypassed. (Direct colour has 953 * palettes, true colour does not.) 954 */ 955 if (var->bits_per_pixel == 8) 956 cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; 957 else if (hw.ramdac & RAMDAC_BYPASS) 958 cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; 959 else 960 cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR; 961 962 cyber2000fb_set_timing(cfb, &hw); 963 cyber2000fb_update_start(cfb, var); 964 965 return 0; 966 } 967 968 /* 969 * Pan or Wrap the Display 970 */ 971 static int 972 cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) 973 { 974 struct cfb_info *cfb = (struct cfb_info *)info; 975 976 if (cyber2000fb_update_start(cfb, var)) 977 return -EINVAL; 978 979 cfb->fb.var.xoffset = var->xoffset; 980 cfb->fb.var.yoffset = var->yoffset; 981 982 if (var->vmode & FB_VMODE_YWRAP) { 983 cfb->fb.var.vmode |= FB_VMODE_YWRAP; 984 } else { 985 cfb->fb.var.vmode &= ~FB_VMODE_YWRAP; 986 } 987 988 return 0; 989 } 990 991 /* 992 * (Un)Blank the display. 993 * 994 * Blank the screen if blank_mode != 0, else unblank. If 995 * blank == NULL then the caller blanks by setting the CLUT 996 * (Color Look Up Table) to all black. Return 0 if blanking 997 * succeeded, != 0 if un-/blanking failed due to e.g. a 998 * video mode which doesn't support it. Implements VESA 999 * suspend and powerdown modes on hardware that supports 1000 * disabling hsync/vsync: 1001 * blank_mode == 2: suspend vsync 1002 * blank_mode == 3: suspend hsync 1003 * blank_mode == 4: powerdown 1004 * 1005 * wms...Enable VESA DMPS compatible powerdown mode 1006 * run "setterm -powersave powerdown" to take advantage 1007 */ 1008 static int cyber2000fb_blank(int blank, struct fb_info *info) 1009 { 1010 struct cfb_info *cfb = (struct cfb_info *)info; 1011 unsigned int sync = 0; 1012 int i; 1013 1014 switch (blank) { 1015 case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */ 1016 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0; 1017 break; 1018 case FB_BLANK_HSYNC_SUSPEND: /* hsync off */ 1019 sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0; 1020 break; 1021 case FB_BLANK_VSYNC_SUSPEND: /* vsync off */ 1022 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL; 1023 break; 1024 case FB_BLANK_NORMAL: /* soft blank */ 1025 default: /* unblank */ 1026 break; 1027 } 1028 1029 cyber2000_grphw(EXT_SYNC_CTL, sync, cfb); 1030 1031 if (blank <= 1) { 1032 /* turn on ramdacs */ 1033 cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | 1034 RAMDAC_RAMPWRDN); 1035 cyber2000fb_write_ramdac_ctrl(cfb); 1036 } 1037 1038 /* 1039 * Soft blank/unblank the display. 1040 */ 1041 if (blank) { /* soft blank */ 1042 for (i = 0; i < NR_PALETTE; i++) { 1043 cyber2000fb_writeb(i, 0x3c8, cfb); 1044 cyber2000fb_writeb(0, 0x3c9, cfb); 1045 cyber2000fb_writeb(0, 0x3c9, cfb); 1046 cyber2000fb_writeb(0, 0x3c9, cfb); 1047 } 1048 } else { /* unblank */ 1049 for (i = 0; i < NR_PALETTE; i++) { 1050 cyber2000fb_writeb(i, 0x3c8, cfb); 1051 cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb); 1052 cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb); 1053 cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb); 1054 } 1055 } 1056 1057 if (blank >= 2) { 1058 /* turn off ramdacs */ 1059 cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | 1060 RAMDAC_RAMPWRDN; 1061 cyber2000fb_write_ramdac_ctrl(cfb); 1062 } 1063 1064 return 0; 1065 } 1066 1067 static struct fb_ops cyber2000fb_ops = { 1068 .owner = THIS_MODULE, 1069 .fb_check_var = cyber2000fb_check_var, 1070 .fb_set_par = cyber2000fb_set_par, 1071 .fb_setcolreg = cyber2000fb_setcolreg, 1072 .fb_blank = cyber2000fb_blank, 1073 .fb_pan_display = cyber2000fb_pan_display, 1074 .fb_fillrect = cyber2000fb_fillrect, 1075 .fb_copyarea = cyber2000fb_copyarea, 1076 .fb_imageblit = cyber2000fb_imageblit, 1077 .fb_sync = cyber2000fb_sync, 1078 }; 1079 1080 /* 1081 * This is the only "static" reference to the internal data structures 1082 * of this driver. It is here solely at the moment to support the other 1083 * CyberPro modules external to this driver. 1084 */ 1085 static struct cfb_info *int_cfb_info; 1086 1087 /* 1088 * Enable access to the extended registers 1089 */ 1090 void cyber2000fb_enable_extregs(struct cfb_info *cfb) 1091 { 1092 cfb->func_use_count += 1; 1093 1094 if (cfb->func_use_count == 1) { 1095 int old; 1096 1097 old = cyber2000_grphr(EXT_FUNC_CTL, cfb); 1098 old |= EXT_FUNC_CTL_EXTREGENBL; 1099 cyber2000_grphw(EXT_FUNC_CTL, old, cfb); 1100 } 1101 } 1102 EXPORT_SYMBOL(cyber2000fb_enable_extregs); 1103 1104 /* 1105 * Disable access to the extended registers 1106 */ 1107 void cyber2000fb_disable_extregs(struct cfb_info *cfb) 1108 { 1109 if (cfb->func_use_count == 1) { 1110 int old; 1111 1112 old = cyber2000_grphr(EXT_FUNC_CTL, cfb); 1113 old &= ~EXT_FUNC_CTL_EXTREGENBL; 1114 cyber2000_grphw(EXT_FUNC_CTL, old, cfb); 1115 } 1116 1117 if (cfb->func_use_count == 0) 1118 printk(KERN_ERR "disable_extregs: count = 0\n"); 1119 else 1120 cfb->func_use_count -= 1; 1121 } 1122 EXPORT_SYMBOL(cyber2000fb_disable_extregs); 1123 1124 /* 1125 * Attach a capture/tv driver to the core CyberX0X0 driver. 1126 */ 1127 int cyber2000fb_attach(struct cyberpro_info *info, int idx) 1128 { 1129 if (int_cfb_info != NULL) { 1130 info->dev = int_cfb_info->fb.device; 1131 #ifdef CONFIG_FB_CYBER2000_I2C 1132 info->i2c = &int_cfb_info->i2c_adapter; 1133 #else 1134 info->i2c = NULL; 1135 #endif 1136 info->regs = int_cfb_info->regs; 1137 info->irq = int_cfb_info->irq; 1138 info->fb = int_cfb_info->fb.screen_base; 1139 info->fb_size = int_cfb_info->fb.fix.smem_len; 1140 info->info = int_cfb_info; 1141 1142 strlcpy(info->dev_name, int_cfb_info->fb.fix.id, 1143 sizeof(info->dev_name)); 1144 } 1145 1146 return int_cfb_info != NULL; 1147 } 1148 EXPORT_SYMBOL(cyber2000fb_attach); 1149 1150 /* 1151 * Detach a capture/tv driver from the core CyberX0X0 driver. 1152 */ 1153 void cyber2000fb_detach(int idx) 1154 { 1155 } 1156 EXPORT_SYMBOL(cyber2000fb_detach); 1157 1158 #ifdef CONFIG_FB_CYBER2000_DDC 1159 1160 #define DDC_REG 0xb0 1161 #define DDC_SCL_OUT (1 << 0) 1162 #define DDC_SDA_OUT (1 << 4) 1163 #define DDC_SCL_IN (1 << 2) 1164 #define DDC_SDA_IN (1 << 6) 1165 1166 static void cyber2000fb_enable_ddc(struct cfb_info *cfb) 1167 { 1168 spin_lock(&cfb->reg_b0_lock); 1169 cyber2000fb_writew(0x1bf, 0x3ce, cfb); 1170 } 1171 1172 static void cyber2000fb_disable_ddc(struct cfb_info *cfb) 1173 { 1174 cyber2000fb_writew(0x0bf, 0x3ce, cfb); 1175 spin_unlock(&cfb->reg_b0_lock); 1176 } 1177 1178 1179 static void cyber2000fb_ddc_setscl(void *data, int val) 1180 { 1181 struct cfb_info *cfb = data; 1182 unsigned char reg; 1183 1184 cyber2000fb_enable_ddc(cfb); 1185 reg = cyber2000_grphr(DDC_REG, cfb); 1186 if (!val) /* bit is inverted */ 1187 reg |= DDC_SCL_OUT; 1188 else 1189 reg &= ~DDC_SCL_OUT; 1190 cyber2000_grphw(DDC_REG, reg, cfb); 1191 cyber2000fb_disable_ddc(cfb); 1192 } 1193 1194 static void cyber2000fb_ddc_setsda(void *data, int val) 1195 { 1196 struct cfb_info *cfb = data; 1197 unsigned char reg; 1198 1199 cyber2000fb_enable_ddc(cfb); 1200 reg = cyber2000_grphr(DDC_REG, cfb); 1201 if (!val) /* bit is inverted */ 1202 reg |= DDC_SDA_OUT; 1203 else 1204 reg &= ~DDC_SDA_OUT; 1205 cyber2000_grphw(DDC_REG, reg, cfb); 1206 cyber2000fb_disable_ddc(cfb); 1207 } 1208 1209 static int cyber2000fb_ddc_getscl(void *data) 1210 { 1211 struct cfb_info *cfb = data; 1212 int retval; 1213 1214 cyber2000fb_enable_ddc(cfb); 1215 retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SCL_IN); 1216 cyber2000fb_disable_ddc(cfb); 1217 1218 return retval; 1219 } 1220 1221 static int cyber2000fb_ddc_getsda(void *data) 1222 { 1223 struct cfb_info *cfb = data; 1224 int retval; 1225 1226 cyber2000fb_enable_ddc(cfb); 1227 retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SDA_IN); 1228 cyber2000fb_disable_ddc(cfb); 1229 1230 return retval; 1231 } 1232 1233 static int cyber2000fb_setup_ddc_bus(struct cfb_info *cfb) 1234 { 1235 strlcpy(cfb->ddc_adapter.name, cfb->fb.fix.id, 1236 sizeof(cfb->ddc_adapter.name)); 1237 cfb->ddc_adapter.owner = THIS_MODULE; 1238 cfb->ddc_adapter.class = I2C_CLASS_DDC; 1239 cfb->ddc_adapter.algo_data = &cfb->ddc_algo; 1240 cfb->ddc_adapter.dev.parent = cfb->fb.device; 1241 cfb->ddc_algo.setsda = cyber2000fb_ddc_setsda; 1242 cfb->ddc_algo.setscl = cyber2000fb_ddc_setscl; 1243 cfb->ddc_algo.getsda = cyber2000fb_ddc_getsda; 1244 cfb->ddc_algo.getscl = cyber2000fb_ddc_getscl; 1245 cfb->ddc_algo.udelay = 10; 1246 cfb->ddc_algo.timeout = 20; 1247 cfb->ddc_algo.data = cfb; 1248 1249 i2c_set_adapdata(&cfb->ddc_adapter, cfb); 1250 1251 return i2c_bit_add_bus(&cfb->ddc_adapter); 1252 } 1253 #endif /* CONFIG_FB_CYBER2000_DDC */ 1254 1255 #ifdef CONFIG_FB_CYBER2000_I2C 1256 static void cyber2000fb_i2c_setsda(void *data, int state) 1257 { 1258 struct cfb_info *cfb = data; 1259 unsigned int latch2; 1260 1261 spin_lock(&cfb->reg_b0_lock); 1262 latch2 = cyber2000_grphr(EXT_LATCH2, cfb); 1263 latch2 &= EXT_LATCH2_I2C_CLKEN; 1264 if (state) 1265 latch2 |= EXT_LATCH2_I2C_DATEN; 1266 cyber2000_grphw(EXT_LATCH2, latch2, cfb); 1267 spin_unlock(&cfb->reg_b0_lock); 1268 } 1269 1270 static void cyber2000fb_i2c_setscl(void *data, int state) 1271 { 1272 struct cfb_info *cfb = data; 1273 unsigned int latch2; 1274 1275 spin_lock(&cfb->reg_b0_lock); 1276 latch2 = cyber2000_grphr(EXT_LATCH2, cfb); 1277 latch2 &= EXT_LATCH2_I2C_DATEN; 1278 if (state) 1279 latch2 |= EXT_LATCH2_I2C_CLKEN; 1280 cyber2000_grphw(EXT_LATCH2, latch2, cfb); 1281 spin_unlock(&cfb->reg_b0_lock); 1282 } 1283 1284 static int cyber2000fb_i2c_getsda(void *data) 1285 { 1286 struct cfb_info *cfb = data; 1287 int ret; 1288 1289 spin_lock(&cfb->reg_b0_lock); 1290 ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_DAT); 1291 spin_unlock(&cfb->reg_b0_lock); 1292 1293 return ret; 1294 } 1295 1296 static int cyber2000fb_i2c_getscl(void *data) 1297 { 1298 struct cfb_info *cfb = data; 1299 int ret; 1300 1301 spin_lock(&cfb->reg_b0_lock); 1302 ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_CLK); 1303 spin_unlock(&cfb->reg_b0_lock); 1304 1305 return ret; 1306 } 1307 1308 static int cyber2000fb_i2c_register(struct cfb_info *cfb) 1309 { 1310 strlcpy(cfb->i2c_adapter.name, cfb->fb.fix.id, 1311 sizeof(cfb->i2c_adapter.name)); 1312 cfb->i2c_adapter.owner = THIS_MODULE; 1313 cfb->i2c_adapter.algo_data = &cfb->i2c_algo; 1314 cfb->i2c_adapter.dev.parent = cfb->fb.device; 1315 cfb->i2c_algo.setsda = cyber2000fb_i2c_setsda; 1316 cfb->i2c_algo.setscl = cyber2000fb_i2c_setscl; 1317 cfb->i2c_algo.getsda = cyber2000fb_i2c_getsda; 1318 cfb->i2c_algo.getscl = cyber2000fb_i2c_getscl; 1319 cfb->i2c_algo.udelay = 5; 1320 cfb->i2c_algo.timeout = msecs_to_jiffies(100); 1321 cfb->i2c_algo.data = cfb; 1322 1323 return i2c_bit_add_bus(&cfb->i2c_adapter); 1324 } 1325 1326 static void cyber2000fb_i2c_unregister(struct cfb_info *cfb) 1327 { 1328 i2c_del_adapter(&cfb->i2c_adapter); 1329 } 1330 #else 1331 #define cyber2000fb_i2c_register(cfb) (0) 1332 #define cyber2000fb_i2c_unregister(cfb) do { } while (0) 1333 #endif 1334 1335 /* 1336 * These parameters give 1337 * 640x480, hsync 31.5kHz, vsync 60Hz 1338 */ 1339 static struct fb_videomode cyber2000fb_default_mode = { 1340 .refresh = 60, 1341 .xres = 640, 1342 .yres = 480, 1343 .pixclock = 39722, 1344 .left_margin = 56, 1345 .right_margin = 16, 1346 .upper_margin = 34, 1347 .lower_margin = 9, 1348 .hsync_len = 88, 1349 .vsync_len = 2, 1350 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 1351 .vmode = FB_VMODE_NONINTERLACED 1352 }; 1353 1354 static char igs_regs[] = { 1355 EXT_CRT_IRQ, 0, 1356 EXT_CRT_TEST, 0, 1357 EXT_SYNC_CTL, 0, 1358 EXT_SEG_WRITE_PTR, 0, 1359 EXT_SEG_READ_PTR, 0, 1360 EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE | 1361 EXT_BIU_MISC_COP_ENABLE | 1362 EXT_BIU_MISC_COP_BFC, 1363 EXT_FUNC_CTL, 0, 1364 CURS_H_START, 0, 1365 CURS_H_START + 1, 0, 1366 CURS_H_PRESET, 0, 1367 CURS_V_START, 0, 1368 CURS_V_START + 1, 0, 1369 CURS_V_PRESET, 0, 1370 CURS_CTL, 0, 1371 EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT, 1372 EXT_OVERSCAN_RED, 0, 1373 EXT_OVERSCAN_GREEN, 0, 1374 EXT_OVERSCAN_BLUE, 0, 1375 1376 /* some of these are questionable when we have a BIOS */ 1377 EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK | 1378 EXT_MEM_CTL0_RAS_1 | 1379 EXT_MEM_CTL0_MULTCAS, 1380 EXT_HIDDEN_CTL1, 0x30, 1381 EXT_FIFO_CTL, 0x0b, 1382 EXT_FIFO_CTL + 1, 0x17, 1383 0x76, 0x00, 1384 EXT_HIDDEN_CTL4, 0xc8 1385 }; 1386 1387 /* 1388 * Initialise the CyberPro hardware. On the CyberPro5XXXX, 1389 * ensure that we're using the correct PLL (5XXX's may be 1390 * programmed to use an additional set of PLLs.) 1391 */ 1392 static void cyberpro_init_hw(struct cfb_info *cfb) 1393 { 1394 int i; 1395 1396 for (i = 0; i < sizeof(igs_regs); i += 2) 1397 cyber2000_grphw(igs_regs[i], igs_regs[i + 1], cfb); 1398 1399 if (cfb->id == ID_CYBERPRO_5000) { 1400 unsigned char val; 1401 cyber2000fb_writeb(0xba, 0x3ce, cfb); 1402 val = cyber2000fb_readb(0x3cf, cfb) & 0x80; 1403 cyber2000fb_writeb(val, 0x3cf, cfb); 1404 } 1405 } 1406 1407 static struct cfb_info *cyberpro_alloc_fb_info(unsigned int id, char *name) 1408 { 1409 struct cfb_info *cfb; 1410 1411 cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL); 1412 if (!cfb) 1413 return NULL; 1414 1415 1416 cfb->id = id; 1417 1418 if (id == ID_CYBERPRO_5000) 1419 cfb->ref_ps = 40690; /* 24.576 MHz */ 1420 else 1421 cfb->ref_ps = 69842; /* 14.31818 MHz (69841?) */ 1422 1423 cfb->divisors[0] = 1; 1424 cfb->divisors[1] = 2; 1425 cfb->divisors[2] = 4; 1426 1427 if (id == ID_CYBERPRO_2000) 1428 cfb->divisors[3] = 8; 1429 else 1430 cfb->divisors[3] = 6; 1431 1432 strcpy(cfb->fb.fix.id, name); 1433 1434 cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; 1435 cfb->fb.fix.type_aux = 0; 1436 cfb->fb.fix.xpanstep = 0; 1437 cfb->fb.fix.ypanstep = 1; 1438 cfb->fb.fix.ywrapstep = 0; 1439 1440 switch (id) { 1441 case ID_IGA_1682: 1442 cfb->fb.fix.accel = 0; 1443 break; 1444 1445 case ID_CYBERPRO_2000: 1446 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000; 1447 break; 1448 1449 case ID_CYBERPRO_2010: 1450 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010; 1451 break; 1452 1453 case ID_CYBERPRO_5000: 1454 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000; 1455 break; 1456 } 1457 1458 cfb->fb.var.nonstd = 0; 1459 cfb->fb.var.activate = FB_ACTIVATE_NOW; 1460 cfb->fb.var.height = -1; 1461 cfb->fb.var.width = -1; 1462 cfb->fb.var.accel_flags = FB_ACCELF_TEXT; 1463 1464 cfb->fb.fbops = &cyber2000fb_ops; 1465 cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; 1466 cfb->fb.pseudo_palette = cfb->pseudo_palette; 1467 1468 spin_lock_init(&cfb->reg_b0_lock); 1469 1470 fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0); 1471 1472 return cfb; 1473 } 1474 1475 static void cyberpro_free_fb_info(struct cfb_info *cfb) 1476 { 1477 if (cfb) { 1478 /* 1479 * Free the colourmap 1480 */ 1481 fb_alloc_cmap(&cfb->fb.cmap, 0, 0); 1482 1483 kfree(cfb); 1484 } 1485 } 1486 1487 /* 1488 * Parse Cyber2000fb options. Usage: 1489 * video=cyber2000:font:fontname 1490 */ 1491 #ifndef MODULE 1492 static int cyber2000fb_setup(char *options) 1493 { 1494 char *opt; 1495 1496 if (!options || !*options) 1497 return 0; 1498 1499 while ((opt = strsep(&options, ",")) != NULL) { 1500 if (!*opt) 1501 continue; 1502 1503 if (strncmp(opt, "font:", 5) == 0) { 1504 static char default_font_storage[40]; 1505 1506 strlcpy(default_font_storage, opt + 5, 1507 sizeof(default_font_storage)); 1508 default_font = default_font_storage; 1509 continue; 1510 } 1511 1512 printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt); 1513 } 1514 return 0; 1515 } 1516 #endif /* MODULE */ 1517 1518 /* 1519 * The CyberPro chips can be placed on many different bus types. 1520 * This probe function is common to all bus types. The bus-specific 1521 * probe function is expected to have: 1522 * - enabled access to the linear memory region 1523 * - memory mapped access to the registers 1524 * - initialised mem_ctl1 and mem_ctl2 appropriately. 1525 */ 1526 static int cyberpro_common_probe(struct cfb_info *cfb) 1527 { 1528 u_long smem_size; 1529 u_int h_sync, v_sync; 1530 int err; 1531 1532 cyberpro_init_hw(cfb); 1533 1534 /* 1535 * Get the video RAM size and width from the VGA register. 1536 * This should have been already initialised by the BIOS, 1537 * but if it's garbage, claim default 1MB VRAM (woody) 1538 */ 1539 cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb); 1540 cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb); 1541 1542 /* 1543 * Determine the size of the memory. 1544 */ 1545 switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) { 1546 case MEM_CTL2_SIZE_4MB: 1547 smem_size = 0x00400000; 1548 break; 1549 case MEM_CTL2_SIZE_2MB: 1550 smem_size = 0x00200000; 1551 break; 1552 case MEM_CTL2_SIZE_1MB: 1553 smem_size = 0x00100000; 1554 break; 1555 default: 1556 smem_size = 0x00100000; 1557 break; 1558 } 1559 1560 cfb->fb.fix.smem_len = smem_size; 1561 cfb->fb.fix.mmio_len = MMIO_SIZE; 1562 cfb->fb.screen_base = cfb->region; 1563 1564 #ifdef CONFIG_FB_CYBER2000_DDC 1565 if (cyber2000fb_setup_ddc_bus(cfb) == 0) 1566 cfb->ddc_registered = true; 1567 #endif 1568 1569 err = -EINVAL; 1570 if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0, 1571 &cyber2000fb_default_mode, 8)) { 1572 printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id); 1573 goto failed; 1574 } 1575 1576 cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 / 1577 (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual); 1578 1579 if (cfb->fb.var.yres_virtual < cfb->fb.var.yres) 1580 cfb->fb.var.yres_virtual = cfb->fb.var.yres; 1581 1582 /* fb_set_var(&cfb->fb.var, -1, &cfb->fb); */ 1583 1584 /* 1585 * Calculate the hsync and vsync frequencies. Note that 1586 * we split the 1e12 constant up so that we can preserve 1587 * the precision and fit the results into 32-bit registers. 1588 * (1953125000 * 512 = 1e12) 1589 */ 1590 h_sync = 1953125000 / cfb->fb.var.pixclock; 1591 h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin + 1592 cfb->fb.var.right_margin + cfb->fb.var.hsync_len); 1593 v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin + 1594 cfb->fb.var.lower_margin + cfb->fb.var.vsync_len); 1595 1596 printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n", 1597 cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10, 1598 cfb->fb.var.xres, cfb->fb.var.yres, 1599 h_sync / 1000, h_sync % 1000, v_sync); 1600 1601 err = cyber2000fb_i2c_register(cfb); 1602 if (err) 1603 goto failed; 1604 1605 err = register_framebuffer(&cfb->fb); 1606 if (err) 1607 cyber2000fb_i2c_unregister(cfb); 1608 1609 failed: 1610 #ifdef CONFIG_FB_CYBER2000_DDC 1611 if (err && cfb->ddc_registered) 1612 i2c_del_adapter(&cfb->ddc_adapter); 1613 #endif 1614 return err; 1615 } 1616 1617 static void cyberpro_common_remove(struct cfb_info *cfb) 1618 { 1619 unregister_framebuffer(&cfb->fb); 1620 #ifdef CONFIG_FB_CYBER2000_DDC 1621 if (cfb->ddc_registered) 1622 i2c_del_adapter(&cfb->ddc_adapter); 1623 #endif 1624 cyber2000fb_i2c_unregister(cfb); 1625 } 1626 1627 static void cyberpro_common_resume(struct cfb_info *cfb) 1628 { 1629 cyberpro_init_hw(cfb); 1630 1631 /* 1632 * Reprogram the MEM_CTL1 and MEM_CTL2 registers 1633 */ 1634 cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb); 1635 cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb); 1636 1637 /* 1638 * Restore the old video mode and the palette. 1639 * We also need to tell fbcon to redraw the console. 1640 */ 1641 cyber2000fb_set_par(&cfb->fb); 1642 } 1643 1644 /* 1645 * PCI specific support. 1646 */ 1647 #ifdef CONFIG_PCI 1648 /* 1649 * We need to wake up the CyberPro, and make sure its in linear memory 1650 * mode. Unfortunately, this is specific to the platform and card that 1651 * we are running on. 1652 * 1653 * On x86 and ARM, should we be initialising the CyberPro first via the 1654 * IO registers, and then the MMIO registers to catch all cases? Can we 1655 * end up in the situation where the chip is in MMIO mode, but not awake 1656 * on an x86 system? 1657 */ 1658 static int cyberpro_pci_enable_mmio(struct cfb_info *cfb) 1659 { 1660 unsigned char val; 1661 1662 #if defined(__sparc_v9__) 1663 #error "You lose, consult DaveM." 1664 #elif defined(__sparc__) 1665 /* 1666 * SPARC does not have an "outb" instruction, so we generate 1667 * I/O cycles storing into a reserved memory space at 1668 * physical address 0x3000000 1669 */ 1670 unsigned char __iomem *iop; 1671 1672 iop = ioremap(0x3000000, 0x5000); 1673 if (iop == NULL) { 1674 printk(KERN_ERR "iga5000: cannot map I/O\n"); 1675 return -ENOMEM; 1676 } 1677 1678 writeb(0x18, iop + 0x46e8); 1679 writeb(0x01, iop + 0x102); 1680 writeb(0x08, iop + 0x46e8); 1681 writeb(EXT_BIU_MISC, iop + 0x3ce); 1682 writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf); 1683 1684 iounmap(iop); 1685 #else 1686 /* 1687 * Most other machine types are "normal", so 1688 * we use the standard IO-based wakeup. 1689 */ 1690 outb(0x18, 0x46e8); 1691 outb(0x01, 0x102); 1692 outb(0x08, 0x46e8); 1693 outb(EXT_BIU_MISC, 0x3ce); 1694 outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf); 1695 #endif 1696 1697 /* 1698 * Allow the CyberPro to accept PCI burst accesses 1699 */ 1700 if (cfb->id == ID_CYBERPRO_2010) { 1701 printk(KERN_INFO "%s: NOT enabling PCI bursts\n", 1702 cfb->fb.fix.id); 1703 } else { 1704 val = cyber2000_grphr(EXT_BUS_CTL, cfb); 1705 if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) { 1706 printk(KERN_INFO "%s: enabling PCI bursts\n", 1707 cfb->fb.fix.id); 1708 1709 val |= EXT_BUS_CTL_PCIBURST_WRITE; 1710 1711 if (cfb->id == ID_CYBERPRO_5000) 1712 val |= EXT_BUS_CTL_PCIBURST_READ; 1713 1714 cyber2000_grphw(EXT_BUS_CTL, val, cfb); 1715 } 1716 } 1717 1718 return 0; 1719 } 1720 1721 static int cyberpro_pci_probe(struct pci_dev *dev, 1722 const struct pci_device_id *id) 1723 { 1724 struct cfb_info *cfb; 1725 char name[16]; 1726 int err; 1727 1728 sprintf(name, "CyberPro%4X", id->device); 1729 1730 err = pci_enable_device(dev); 1731 if (err) 1732 return err; 1733 1734 err = -ENOMEM; 1735 cfb = cyberpro_alloc_fb_info(id->driver_data, name); 1736 if (!cfb) 1737 goto failed_release; 1738 1739 err = pci_request_regions(dev, cfb->fb.fix.id); 1740 if (err) 1741 goto failed_regions; 1742 1743 cfb->irq = dev->irq; 1744 cfb->region = pci_ioremap_bar(dev, 0); 1745 if (!cfb->region) { 1746 err = -ENOMEM; 1747 goto failed_ioremap; 1748 } 1749 1750 cfb->regs = cfb->region + MMIO_OFFSET; 1751 cfb->fb.device = &dev->dev; 1752 cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET; 1753 cfb->fb.fix.smem_start = pci_resource_start(dev, 0); 1754 1755 /* 1756 * Bring up the hardware. This is expected to enable access 1757 * to the linear memory region, and allow access to the memory 1758 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be 1759 * initialised. 1760 */ 1761 err = cyberpro_pci_enable_mmio(cfb); 1762 if (err) 1763 goto failed; 1764 1765 /* 1766 * Use MCLK from BIOS. FIXME: what about hotplug? 1767 */ 1768 cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb); 1769 cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb); 1770 1771 #ifdef __arm__ 1772 /* 1773 * MCLK on the NetWinder and the Shark is fixed at 75MHz 1774 */ 1775 if (machine_is_netwinder()) { 1776 cfb->mclk_mult = 0xdb; 1777 cfb->mclk_div = 0x54; 1778 } 1779 #endif 1780 1781 err = cyberpro_common_probe(cfb); 1782 if (err) 1783 goto failed; 1784 1785 /* 1786 * Our driver data 1787 */ 1788 pci_set_drvdata(dev, cfb); 1789 if (int_cfb_info == NULL) 1790 int_cfb_info = cfb; 1791 1792 return 0; 1793 1794 failed: 1795 iounmap(cfb->region); 1796 failed_ioremap: 1797 pci_release_regions(dev); 1798 failed_regions: 1799 cyberpro_free_fb_info(cfb); 1800 failed_release: 1801 return err; 1802 } 1803 1804 static void cyberpro_pci_remove(struct pci_dev *dev) 1805 { 1806 struct cfb_info *cfb = pci_get_drvdata(dev); 1807 1808 if (cfb) { 1809 cyberpro_common_remove(cfb); 1810 iounmap(cfb->region); 1811 cyberpro_free_fb_info(cfb); 1812 1813 if (cfb == int_cfb_info) 1814 int_cfb_info = NULL; 1815 1816 pci_release_regions(dev); 1817 } 1818 } 1819 1820 static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state) 1821 { 1822 return 0; 1823 } 1824 1825 /* 1826 * Re-initialise the CyberPro hardware 1827 */ 1828 static int cyberpro_pci_resume(struct pci_dev *dev) 1829 { 1830 struct cfb_info *cfb = pci_get_drvdata(dev); 1831 1832 if (cfb) { 1833 cyberpro_pci_enable_mmio(cfb); 1834 cyberpro_common_resume(cfb); 1835 } 1836 1837 return 0; 1838 } 1839 1840 static struct pci_device_id cyberpro_pci_table[] = { 1841 /* Not yet 1842 * { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682, 1843 * PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 }, 1844 */ 1845 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000, 1846 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 }, 1847 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010, 1848 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 }, 1849 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000, 1850 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 }, 1851 { 0, } 1852 }; 1853 1854 MODULE_DEVICE_TABLE(pci, cyberpro_pci_table); 1855 1856 static struct pci_driver cyberpro_driver = { 1857 .name = "CyberPro", 1858 .probe = cyberpro_pci_probe, 1859 .remove = cyberpro_pci_remove, 1860 .suspend = cyberpro_pci_suspend, 1861 .resume = cyberpro_pci_resume, 1862 .id_table = cyberpro_pci_table 1863 }; 1864 #endif 1865 1866 /* 1867 * I don't think we can use the "module_init" stuff here because 1868 * the fbcon stuff may not be initialised yet. Hence the #ifdef 1869 * around module_init. 1870 * 1871 * Tony: "module_init" is now required 1872 */ 1873 static int __init cyber2000fb_init(void) 1874 { 1875 int ret = -1, err; 1876 1877 #ifndef MODULE 1878 char *option = NULL; 1879 1880 if (fb_get_options("cyber2000fb", &option)) 1881 return -ENODEV; 1882 cyber2000fb_setup(option); 1883 #endif 1884 1885 err = pci_register_driver(&cyberpro_driver); 1886 if (!err) 1887 ret = 0; 1888 1889 return ret ? err : 0; 1890 } 1891 module_init(cyber2000fb_init); 1892 1893 static void __exit cyberpro_exit(void) 1894 { 1895 pci_unregister_driver(&cyberpro_driver); 1896 } 1897 module_exit(cyberpro_exit); 1898 1899 MODULE_AUTHOR("Russell King"); 1900 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver"); 1901 MODULE_LICENSE("GPL"); 1902