1 /* 2 * controlfb.c -- frame buffer device for the PowerMac 'control' display 3 * 4 * Created 12 July 1998 by Dan Jacobowitz <dan@debian.org> 5 * Copyright (C) 1998 Dan Jacobowitz 6 * Copyright (C) 2001 Takashi Oe 7 * 8 * Mmap code by Michel Lanners <mlan@cpu.lu> 9 * 10 * Frame buffer structure from: 11 * drivers/video/chipsfb.c -- frame buffer device for 12 * Chips & Technologies 65550 chip. 13 * 14 * Copyright (C) 1998 Paul Mackerras 15 * 16 * This file is derived from the Powermac "chips" driver: 17 * Copyright (C) 1997 Fabio Riccardi. 18 * And from the frame buffer device for Open Firmware-initialized devices: 19 * Copyright (C) 1997 Geert Uytterhoeven. 20 * 21 * Hardware information from: 22 * control.c: Console support for PowerMac "control" display adaptor. 23 * Copyright (C) 1996 Paul Mackerras 24 * 25 * Updated to 2.5 framebuffer API by Ben Herrenschmidt 26 * <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>, 27 * and James Simmons <jsimmons@infradead.org>. 28 * 29 * This file is subject to the terms and conditions of the GNU General Public 30 * License. See the file COPYING in the main directory of this archive for 31 * more details. 32 */ 33 34 #include <linux/kernel.h> 35 #include <linux/errno.h> 36 #include <linux/string.h> 37 #include <linux/mm.h> 38 #include <linux/slab.h> 39 #include <linux/vmalloc.h> 40 #include <linux/delay.h> 41 #include <linux/interrupt.h> 42 #include <linux/of.h> 43 #include <linux/of_address.h> 44 #include <linux/fb.h> 45 #include <linux/init.h> 46 #include <linux/pci.h> 47 #include <linux/nvram.h> 48 #include <linux/adb.h> 49 #include <linux/cuda.h> 50 #ifdef CONFIG_BOOTX_TEXT 51 #include <asm/btext.h> 52 #endif 53 54 #include "macmodes.h" 55 #include "controlfb.h" 56 57 #if !defined(CONFIG_PPC_PMAC) || !defined(CONFIG_PPC32) 58 #define invalid_vram_cache(addr) 59 #undef in_8 60 #undef out_8 61 #undef in_le32 62 #undef out_le32 63 #define in_8(addr) 0 64 #define out_8(addr, val) (void)(val) 65 #define in_le32(addr) 0 66 #define out_le32(addr, val) (void)(val) 67 #ifndef pgprot_cached_wthru 68 #define pgprot_cached_wthru(prot) (prot) 69 #endif 70 #else 71 static void invalid_vram_cache(void __force *addr) 72 { 73 eieio(); 74 dcbf(addr); 75 mb(); 76 eieio(); 77 dcbf(addr); 78 mb(); 79 } 80 #endif 81 82 struct fb_par_control { 83 int vmode, cmode; 84 int xres, yres; 85 int vxres, vyres; 86 int xoffset, yoffset; 87 int pitch; 88 struct control_regvals regvals; 89 unsigned long sync; 90 unsigned char ctrl; 91 }; 92 93 #define DIRTY(z) ((x)->z != (y)->z) 94 #define DIRTY_CMAP(z) (memcmp(&((x)->z), &((y)->z), sizeof((y)->z))) 95 static inline int PAR_EQUAL(struct fb_par_control *x, struct fb_par_control *y) 96 { 97 int i, results; 98 99 results = 1; 100 for (i = 0; i < 3; i++) 101 results &= !DIRTY(regvals.clock_params[i]); 102 if (!results) 103 return 0; 104 for (i = 0; i < 16; i++) 105 results &= !DIRTY(regvals.regs[i]); 106 if (!results) 107 return 0; 108 return (!DIRTY(cmode) && !DIRTY(xres) && !DIRTY(yres) 109 && !DIRTY(vxres) && !DIRTY(vyres)); 110 } 111 112 struct fb_info_control { 113 struct fb_info info; 114 struct fb_par_control par; 115 u32 pseudo_palette[16]; 116 117 struct cmap_regs __iomem *cmap_regs; 118 unsigned long cmap_regs_phys; 119 120 struct control_regs __iomem *control_regs; 121 unsigned long control_regs_phys; 122 unsigned long control_regs_size; 123 124 __u8 __iomem *frame_buffer; 125 unsigned long frame_buffer_phys; 126 unsigned long fb_orig_base; 127 unsigned long fb_orig_size; 128 129 int control_use_bank2; 130 unsigned long total_vram; 131 unsigned char vram_attr; 132 }; 133 134 /* control register access macro */ 135 #define CNTRL_REG(INFO,REG) (&(((INFO)->control_regs->REG).r)) 136 137 138 /************************** Internal variables *******************************/ 139 140 static struct fb_info_control *control_fb; 141 142 static int default_vmode __initdata = VMODE_NVRAM; 143 static int default_cmode __initdata = CMODE_NVRAM; 144 145 146 static int controlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 147 u_int transp, struct fb_info *info) 148 { 149 struct fb_info_control *p = 150 container_of(info, struct fb_info_control, info); 151 __u8 r, g, b; 152 153 if (regno > 255) 154 return 1; 155 156 r = red >> 8; 157 g = green >> 8; 158 b = blue >> 8; 159 160 out_8(&p->cmap_regs->addr, regno); /* tell clut what addr to fill */ 161 out_8(&p->cmap_regs->lut, r); /* send one color channel at */ 162 out_8(&p->cmap_regs->lut, g); /* a time... */ 163 out_8(&p->cmap_regs->lut, b); 164 165 if (regno < 16) { 166 int i; 167 switch (p->par.cmode) { 168 case CMODE_16: 169 p->pseudo_palette[regno] = 170 (regno << 10) | (regno << 5) | regno; 171 break; 172 case CMODE_32: 173 i = (regno << 8) | regno; 174 p->pseudo_palette[regno] = (i << 16) | i; 175 break; 176 } 177 } 178 179 return 0; 180 } 181 182 183 /******************** End of controlfb_ops implementation ******************/ 184 185 186 187 static void set_control_clock(unsigned char *params) 188 { 189 #ifdef CONFIG_ADB_CUDA 190 struct adb_request req; 191 int i; 192 193 for (i = 0; i < 3; ++i) { 194 cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC, 195 0x50, i + 1, params[i]); 196 while (!req.complete) 197 cuda_poll(); 198 } 199 #endif 200 } 201 202 /* 203 * Set screen start address according to var offset values 204 */ 205 static inline void set_screen_start(int xoffset, int yoffset, 206 struct fb_info_control *p) 207 { 208 struct fb_par_control *par = &p->par; 209 210 par->xoffset = xoffset; 211 par->yoffset = yoffset; 212 out_le32(CNTRL_REG(p,start_addr), 213 par->yoffset * par->pitch + (par->xoffset << par->cmode)); 214 } 215 216 #define RADACAL_WRITE(a,d) \ 217 out_8(&p->cmap_regs->addr, (a)); \ 218 out_8(&p->cmap_regs->dat, (d)) 219 220 /* Now how about actually saying, Make it so! */ 221 /* Some things in here probably don't need to be done each time. */ 222 static void control_set_hardware(struct fb_info_control *p, struct fb_par_control *par) 223 { 224 struct control_regvals *r; 225 volatile struct preg __iomem *rp; 226 int i, cmode; 227 228 if (PAR_EQUAL(&p->par, par)) { 229 /* 230 * check if only xoffset or yoffset differs. 231 * this prevents flickers in typical VT switch case. 232 */ 233 if (p->par.xoffset != par->xoffset || 234 p->par.yoffset != par->yoffset) 235 set_screen_start(par->xoffset, par->yoffset, p); 236 237 return; 238 } 239 240 p->par = *par; 241 cmode = p->par.cmode; 242 r = &par->regvals; 243 244 /* Turn off display */ 245 out_le32(CNTRL_REG(p,ctrl), 0x400 | par->ctrl); 246 247 set_control_clock(r->clock_params); 248 249 RADACAL_WRITE(0x20, r->radacal_ctrl); 250 RADACAL_WRITE(0x21, p->control_use_bank2 ? 0 : 1); 251 RADACAL_WRITE(0x10, 0); 252 RADACAL_WRITE(0x11, 0); 253 254 rp = &p->control_regs->vswin; 255 for (i = 0; i < 16; ++i, ++rp) 256 out_le32(&rp->r, r->regs[i]); 257 258 out_le32(CNTRL_REG(p,pitch), par->pitch); 259 out_le32(CNTRL_REG(p,mode), r->mode); 260 out_le32(CNTRL_REG(p,vram_attr), p->vram_attr); 261 out_le32(CNTRL_REG(p,start_addr), par->yoffset * par->pitch 262 + (par->xoffset << cmode)); 263 out_le32(CNTRL_REG(p,rfrcnt), 0x1e5); 264 out_le32(CNTRL_REG(p,intr_ena), 0); 265 266 /* Turn on display */ 267 out_le32(CNTRL_REG(p,ctrl), par->ctrl); 268 269 #ifdef CONFIG_BOOTX_TEXT 270 btext_update_display(p->frame_buffer_phys + CTRLFB_OFF, 271 p->par.xres, p->par.yres, 272 (cmode == CMODE_32? 32: cmode == CMODE_16? 16: 8), 273 p->par.pitch); 274 #endif /* CONFIG_BOOTX_TEXT */ 275 } 276 277 /* Work out which banks of VRAM we have installed. */ 278 /* danj: I guess the card just ignores writes to nonexistant VRAM... */ 279 280 static void __init find_vram_size(struct fb_info_control *p) 281 { 282 int bank1, bank2; 283 284 /* 285 * Set VRAM in 2MB (bank 1) mode 286 * VRAM Bank 2 will be accessible through offset 0x600000 if present 287 * and VRAM Bank 1 will not respond at that offset even if present 288 */ 289 out_le32(CNTRL_REG(p,vram_attr), 0x31); 290 291 out_8(&p->frame_buffer[0x600000], 0xb3); 292 out_8(&p->frame_buffer[0x600001], 0x71); 293 invalid_vram_cache(&p->frame_buffer[0x600000]); 294 295 bank2 = (in_8(&p->frame_buffer[0x600000]) == 0xb3) 296 && (in_8(&p->frame_buffer[0x600001]) == 0x71); 297 298 /* 299 * Set VRAM in 2MB (bank 2) mode 300 * VRAM Bank 1 will be accessible through offset 0x000000 if present 301 * and VRAM Bank 2 will not respond at that offset even if present 302 */ 303 out_le32(CNTRL_REG(p,vram_attr), 0x39); 304 305 out_8(&p->frame_buffer[0], 0x5a); 306 out_8(&p->frame_buffer[1], 0xc7); 307 invalid_vram_cache(&p->frame_buffer[0]); 308 309 bank1 = (in_8(&p->frame_buffer[0]) == 0x5a) 310 && (in_8(&p->frame_buffer[1]) == 0xc7); 311 312 if (bank2) { 313 if (!bank1) { 314 /* 315 * vram bank 2 only 316 */ 317 p->control_use_bank2 = 1; 318 p->vram_attr = 0x39; 319 p->frame_buffer += 0x600000; 320 p->frame_buffer_phys += 0x600000; 321 } else { 322 /* 323 * 4 MB vram 324 */ 325 p->vram_attr = 0x51; 326 } 327 } else { 328 /* 329 * vram bank 1 only 330 */ 331 p->vram_attr = 0x31; 332 } 333 334 p->total_vram = (bank1 + bank2) * 0x200000; 335 336 printk(KERN_INFO "controlfb: VRAM Total = %dMB " 337 "(%dMB @ bank 1, %dMB @ bank 2)\n", 338 (bank1 + bank2) << 1, bank1 << 1, bank2 << 1); 339 } 340 341 /* 342 * Get the monitor sense value. 343 * Note that this can be called before calibrate_delay, 344 * so we can't use udelay. 345 */ 346 static int read_control_sense(struct fb_info_control *p) 347 { 348 int sense; 349 350 out_le32(CNTRL_REG(p,mon_sense), 7); /* drive all lines high */ 351 __delay(200); 352 out_le32(CNTRL_REG(p,mon_sense), 077); /* turn off drivers */ 353 __delay(2000); 354 sense = (in_le32(CNTRL_REG(p,mon_sense)) & 0x1c0) << 2; 355 356 /* drive each sense line low in turn and collect the other 2 */ 357 out_le32(CNTRL_REG(p,mon_sense), 033); /* drive A low */ 358 __delay(2000); 359 sense |= (in_le32(CNTRL_REG(p,mon_sense)) & 0xc0) >> 2; 360 out_le32(CNTRL_REG(p,mon_sense), 055); /* drive B low */ 361 __delay(2000); 362 sense |= ((in_le32(CNTRL_REG(p,mon_sense)) & 0x100) >> 5) 363 | ((in_le32(CNTRL_REG(p,mon_sense)) & 0x40) >> 4); 364 out_le32(CNTRL_REG(p,mon_sense), 066); /* drive C low */ 365 __delay(2000); 366 sense |= (in_le32(CNTRL_REG(p,mon_sense)) & 0x180) >> 7; 367 368 out_le32(CNTRL_REG(p,mon_sense), 077); /* turn off drivers */ 369 370 return sense; 371 } 372 373 /********************** Various translation functions **********************/ 374 375 #define CONTROL_PIXCLOCK_BASE 256016 376 #define CONTROL_PIXCLOCK_MIN 5000 /* ~ 200 MHz dot clock */ 377 378 /* 379 * calculate the clock parameters to be sent to CUDA according to given 380 * pixclock in pico second. 381 */ 382 static int calc_clock_params(unsigned long clk, unsigned char *param) 383 { 384 unsigned long p0, p1, p2, k, l, m, n, min; 385 386 if (clk > (CONTROL_PIXCLOCK_BASE << 3)) 387 return 1; 388 389 p2 = ((clk << 4) < CONTROL_PIXCLOCK_BASE)? 3: 2; 390 l = clk << p2; 391 p0 = 0; 392 p1 = 0; 393 for (k = 1, min = l; k < 32; k++) { 394 unsigned long rem; 395 396 m = CONTROL_PIXCLOCK_BASE * k; 397 n = m / l; 398 rem = m % l; 399 if (n && (n < 128) && rem < min) { 400 p0 = k; 401 p1 = n; 402 min = rem; 403 } 404 } 405 if (!p0 || !p1) 406 return 1; 407 408 param[0] = p0; 409 param[1] = p1; 410 param[2] = p2; 411 412 return 0; 413 } 414 415 416 /* 417 * This routine takes a user-supplied var, and picks the best vmode/cmode 418 * from it. 419 */ 420 421 static int control_var_to_par(struct fb_var_screeninfo *var, 422 struct fb_par_control *par, const struct fb_info *fb_info) 423 { 424 int cmode, piped_diff, hstep; 425 unsigned hperiod, hssync, hsblank, hesync, heblank, piped, heq, hlfln, 426 hserr, vperiod, vssync, vesync, veblank, vsblank, vswin, vewin; 427 unsigned long pixclock; 428 struct fb_info_control *p = 429 container_of(fb_info, struct fb_info_control, info); 430 struct control_regvals *r = &par->regvals; 431 432 switch (var->bits_per_pixel) { 433 case 8: 434 par->cmode = CMODE_8; 435 if (p->total_vram > 0x200000) { 436 r->mode = 3; 437 r->radacal_ctrl = 0x20; 438 piped_diff = 13; 439 } else { 440 r->mode = 2; 441 r->radacal_ctrl = 0x10; 442 piped_diff = 9; 443 } 444 break; 445 case 15: 446 case 16: 447 par->cmode = CMODE_16; 448 if (p->total_vram > 0x200000) { 449 r->mode = 2; 450 r->radacal_ctrl = 0x24; 451 piped_diff = 5; 452 } else { 453 r->mode = 1; 454 r->radacal_ctrl = 0x14; 455 piped_diff = 3; 456 } 457 break; 458 case 32: 459 par->cmode = CMODE_32; 460 if (p->total_vram > 0x200000) { 461 r->mode = 1; 462 r->radacal_ctrl = 0x28; 463 } else { 464 r->mode = 0; 465 r->radacal_ctrl = 0x18; 466 } 467 piped_diff = 1; 468 break; 469 default: 470 return -EINVAL; 471 } 472 473 /* 474 * adjust xres and vxres so that the corresponding memory widths are 475 * 32-byte aligned 476 */ 477 hstep = 31 >> par->cmode; 478 par->xres = (var->xres + hstep) & ~hstep; 479 par->vxres = (var->xres_virtual + hstep) & ~hstep; 480 par->xoffset = (var->xoffset + hstep) & ~hstep; 481 if (par->vxres < par->xres) 482 par->vxres = par->xres; 483 par->pitch = par->vxres << par->cmode; 484 485 par->yres = var->yres; 486 par->vyres = var->yres_virtual; 487 par->yoffset = var->yoffset; 488 if (par->vyres < par->yres) 489 par->vyres = par->yres; 490 491 par->sync = var->sync; 492 493 if (par->pitch * par->vyres + CTRLFB_OFF > p->total_vram) 494 return -EINVAL; 495 496 if (par->xoffset + par->xres > par->vxres) 497 par->xoffset = par->vxres - par->xres; 498 if (par->yoffset + par->yres > par->vyres) 499 par->yoffset = par->vyres - par->yres; 500 501 pixclock = (var->pixclock < CONTROL_PIXCLOCK_MIN)? CONTROL_PIXCLOCK_MIN: 502 var->pixclock; 503 if (calc_clock_params(pixclock, r->clock_params)) 504 return -EINVAL; 505 506 hperiod = ((var->left_margin + par->xres + var->right_margin 507 + var->hsync_len) >> 1) - 2; 508 hssync = hperiod + 1; 509 hsblank = hssync - (var->right_margin >> 1); 510 hesync = (var->hsync_len >> 1) - 1; 511 heblank = (var->left_margin >> 1) + hesync; 512 piped = heblank - piped_diff; 513 heq = var->hsync_len >> 2; 514 hlfln = (hperiod+2) >> 1; 515 hserr = hssync-hesync; 516 vperiod = (var->vsync_len + var->lower_margin + par->yres 517 + var->upper_margin) << 1; 518 vssync = vperiod - 2; 519 vesync = (var->vsync_len << 1) - vperiod + vssync; 520 veblank = (var->upper_margin << 1) + vesync; 521 vsblank = vssync - (var->lower_margin << 1); 522 vswin = (vsblank+vssync) >> 1; 523 vewin = (vesync+veblank) >> 1; 524 525 r->regs[0] = vswin; 526 r->regs[1] = vsblank; 527 r->regs[2] = veblank; 528 r->regs[3] = vewin; 529 r->regs[4] = vesync; 530 r->regs[5] = vssync; 531 r->regs[6] = vperiod; 532 r->regs[7] = piped; 533 r->regs[8] = hperiod; 534 r->regs[9] = hsblank; 535 r->regs[10] = heblank; 536 r->regs[11] = hesync; 537 r->regs[12] = hssync; 538 r->regs[13] = heq; 539 r->regs[14] = hlfln; 540 r->regs[15] = hserr; 541 542 if (par->xres >= 1280 && par->cmode >= CMODE_16) 543 par->ctrl = 0x7f; 544 else 545 par->ctrl = 0x3b; 546 547 if (mac_var_to_vmode(var, &par->vmode, &cmode)) 548 par->vmode = 0; 549 550 return 0; 551 } 552 553 554 /* 555 * Convert hardware data in par to an fb_var_screeninfo 556 */ 557 558 static void control_par_to_var(struct fb_par_control *par, struct fb_var_screeninfo *var) 559 { 560 struct control_regints *rv; 561 562 rv = (struct control_regints *) par->regvals.regs; 563 564 memset(var, 0, sizeof(*var)); 565 var->xres = par->xres; 566 var->yres = par->yres; 567 var->xres_virtual = par->vxres; 568 var->yres_virtual = par->vyres; 569 var->xoffset = par->xoffset; 570 var->yoffset = par->yoffset; 571 572 switch(par->cmode) { 573 default: 574 case CMODE_8: 575 var->bits_per_pixel = 8; 576 var->red.length = 8; 577 var->green.length = 8; 578 var->blue.length = 8; 579 break; 580 case CMODE_16: /* RGB 555 */ 581 var->bits_per_pixel = 16; 582 var->red.offset = 10; 583 var->red.length = 5; 584 var->green.offset = 5; 585 var->green.length = 5; 586 var->blue.length = 5; 587 break; 588 case CMODE_32: /* RGB 888 */ 589 var->bits_per_pixel = 32; 590 var->red.offset = 16; 591 var->red.length = 8; 592 var->green.offset = 8; 593 var->green.length = 8; 594 var->blue.length = 8; 595 var->transp.offset = 24; 596 var->transp.length = 8; 597 break; 598 } 599 var->height = -1; 600 var->width = -1; 601 var->vmode = FB_VMODE_NONINTERLACED; 602 603 var->left_margin = (rv->heblank - rv->hesync) << 1; 604 var->right_margin = (rv->hssync - rv->hsblank) << 1; 605 var->hsync_len = (rv->hperiod + 2 - rv->hssync + rv->hesync) << 1; 606 607 var->upper_margin = (rv->veblank - rv->vesync) >> 1; 608 var->lower_margin = (rv->vssync - rv->vsblank) >> 1; 609 var->vsync_len = (rv->vperiod - rv->vssync + rv->vesync) >> 1; 610 611 var->sync = par->sync; 612 613 /* 614 * 10^12 * clock_params[0] / (3906400 * clock_params[1] 615 * * 2^clock_params[2]) 616 * (10^12 * clock_params[0] / (3906400 * clock_params[1])) 617 * >> clock_params[2] 618 */ 619 /* (255990.17 * clock_params[0] / clock_params[1]) >> clock_params[2] */ 620 var->pixclock = CONTROL_PIXCLOCK_BASE * par->regvals.clock_params[0]; 621 var->pixclock /= par->regvals.clock_params[1]; 622 var->pixclock >>= par->regvals.clock_params[2]; 623 } 624 625 /******************** The functions for controlfb_ops ********************/ 626 627 /* 628 * Checks a var structure 629 */ 630 static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info) 631 { 632 struct fb_par_control par; 633 int err; 634 635 err = control_var_to_par(var, &par, info); 636 if (err) 637 return err; 638 control_par_to_var(&par, var); 639 640 return 0; 641 } 642 643 /* 644 * Applies current var to display 645 */ 646 static int controlfb_set_par (struct fb_info *info) 647 { 648 struct fb_info_control *p = 649 container_of(info, struct fb_info_control, info); 650 struct fb_par_control par; 651 int err; 652 653 if((err = control_var_to_par(&info->var, &par, info))) { 654 printk (KERN_ERR "controlfb_set_par: error calling" 655 " control_var_to_par: %d.\n", err); 656 return err; 657 } 658 659 control_set_hardware(p, &par); 660 661 info->fix.visual = (p->par.cmode == CMODE_8) ? 662 FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; 663 info->fix.line_length = p->par.pitch; 664 info->fix.xpanstep = 32 >> p->par.cmode; 665 info->fix.ypanstep = 1; 666 667 return 0; 668 } 669 670 static int controlfb_pan_display(struct fb_var_screeninfo *var, 671 struct fb_info *info) 672 { 673 unsigned int xoffset, hstep; 674 struct fb_info_control *p = 675 container_of(info, struct fb_info_control, info); 676 struct fb_par_control *par = &p->par; 677 678 /* 679 * make sure start addr will be 32-byte aligned 680 */ 681 hstep = 0x1f >> par->cmode; 682 xoffset = (var->xoffset + hstep) & ~hstep; 683 684 if (xoffset+par->xres > par->vxres || 685 var->yoffset+par->yres > par->vyres) 686 return -EINVAL; 687 688 set_screen_start(xoffset, var->yoffset, p); 689 690 return 0; 691 } 692 693 static int controlfb_blank(int blank_mode, struct fb_info *info) 694 { 695 struct fb_info_control __maybe_unused *p = 696 container_of(info, struct fb_info_control, info); 697 unsigned ctrl; 698 699 ctrl = in_le32(CNTRL_REG(p, ctrl)); 700 if (blank_mode > 0) 701 switch (blank_mode) { 702 case FB_BLANK_VSYNC_SUSPEND: 703 ctrl &= ~3; 704 break; 705 case FB_BLANK_HSYNC_SUSPEND: 706 ctrl &= ~0x30; 707 break; 708 case FB_BLANK_POWERDOWN: 709 ctrl &= ~0x33; 710 fallthrough; 711 case FB_BLANK_NORMAL: 712 ctrl |= 0x400; 713 break; 714 default: 715 break; 716 } 717 else { 718 ctrl &= ~0x400; 719 ctrl |= 0x33; 720 } 721 out_le32(CNTRL_REG(p,ctrl), ctrl); 722 723 return 0; 724 } 725 726 /* 727 * Private mmap since we want to have a different caching on the framebuffer 728 * for controlfb. 729 * Note there's no locking in here; it's done in fb_mmap() in fbmem.c. 730 */ 731 static int controlfb_mmap(struct fb_info *info, 732 struct vm_area_struct *vma) 733 { 734 unsigned long mmio_pgoff; 735 unsigned long start; 736 u32 len; 737 738 start = info->fix.smem_start; 739 len = info->fix.smem_len; 740 mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT; 741 if (vma->vm_pgoff >= mmio_pgoff) { 742 if (info->var.accel_flags) 743 return -EINVAL; 744 vma->vm_pgoff -= mmio_pgoff; 745 start = info->fix.mmio_start; 746 len = info->fix.mmio_len; 747 vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); 748 } else { 749 /* framebuffer */ 750 vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot); 751 } 752 753 return vm_iomap_memory(vma, start, len); 754 } 755 756 static const struct fb_ops controlfb_ops = { 757 .owner = THIS_MODULE, 758 .fb_check_var = controlfb_check_var, 759 .fb_set_par = controlfb_set_par, 760 .fb_setcolreg = controlfb_setcolreg, 761 .fb_pan_display = controlfb_pan_display, 762 .fb_blank = controlfb_blank, 763 .fb_mmap = controlfb_mmap, 764 .fb_fillrect = cfb_fillrect, 765 .fb_copyarea = cfb_copyarea, 766 .fb_imageblit = cfb_imageblit, 767 }; 768 769 /* 770 * Set misc info vars for this driver 771 */ 772 static void __init control_init_info(struct fb_info *info, struct fb_info_control *p) 773 { 774 /* Fill fb_info */ 775 info->par = &p->par; 776 info->fbops = &controlfb_ops; 777 info->pseudo_palette = p->pseudo_palette; 778 info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; 779 info->screen_base = p->frame_buffer + CTRLFB_OFF; 780 781 fb_alloc_cmap(&info->cmap, 256, 0); 782 783 /* Fill fix common fields */ 784 strcpy(info->fix.id, "control"); 785 info->fix.mmio_start = p->control_regs_phys; 786 info->fix.mmio_len = sizeof(struct control_regs); 787 info->fix.type = FB_TYPE_PACKED_PIXELS; 788 info->fix.smem_start = p->frame_buffer_phys + CTRLFB_OFF; 789 info->fix.smem_len = p->total_vram - CTRLFB_OFF; 790 info->fix.ywrapstep = 0; 791 info->fix.type_aux = 0; 792 info->fix.accel = FB_ACCEL_NONE; 793 } 794 795 /* 796 * Parse user specified options (`video=controlfb:') 797 */ 798 static void __init control_setup(char *options) 799 { 800 char *this_opt; 801 802 if (!options || !*options) 803 return; 804 805 while ((this_opt = strsep(&options, ",")) != NULL) { 806 if (!strncmp(this_opt, "vmode:", 6)) { 807 int vmode = simple_strtoul(this_opt+6, NULL, 0); 808 if (vmode > 0 && vmode <= VMODE_MAX && 809 control_mac_modes[vmode - 1].m[1] >= 0) 810 default_vmode = vmode; 811 } else if (!strncmp(this_opt, "cmode:", 6)) { 812 int depth = simple_strtoul(this_opt+6, NULL, 0); 813 switch (depth) { 814 case CMODE_8: 815 case CMODE_16: 816 case CMODE_32: 817 default_cmode = depth; 818 break; 819 case 8: 820 default_cmode = CMODE_8; 821 break; 822 case 15: 823 case 16: 824 default_cmode = CMODE_16; 825 break; 826 case 24: 827 case 32: 828 default_cmode = CMODE_32; 829 break; 830 } 831 } 832 } 833 } 834 835 /* 836 * finish off the driver initialization and register 837 */ 838 static int __init init_control(struct fb_info_control *p) 839 { 840 int full, sense, vmode, cmode, vyres; 841 struct fb_var_screeninfo var; 842 int rc; 843 844 printk(KERN_INFO "controlfb: "); 845 846 full = p->total_vram == 0x400000; 847 848 /* Try to pick a video mode out of NVRAM if we have one. */ 849 cmode = default_cmode; 850 if (IS_REACHABLE(CONFIG_NVRAM) && cmode == CMODE_NVRAM) 851 cmode = nvram_read_byte(NV_CMODE); 852 if (cmode < CMODE_8 || cmode > CMODE_32) 853 cmode = CMODE_8; 854 855 vmode = default_vmode; 856 if (IS_REACHABLE(CONFIG_NVRAM) && vmode == VMODE_NVRAM) 857 vmode = nvram_read_byte(NV_VMODE); 858 if (vmode < 1 || vmode > VMODE_MAX || 859 control_mac_modes[vmode - 1].m[full] < cmode) { 860 sense = read_control_sense(p); 861 printk(KERN_CONT "Monitor sense value = 0x%x, ", sense); 862 vmode = mac_map_monitor_sense(sense); 863 if (control_mac_modes[vmode - 1].m[full] < 0) 864 vmode = VMODE_640_480_60; 865 cmode = min(cmode, control_mac_modes[vmode - 1].m[full]); 866 } 867 868 /* Initialize info structure */ 869 control_init_info(&p->info, p); 870 871 /* Setup default var */ 872 if (mac_vmode_to_var(vmode, cmode, &var) < 0) { 873 /* This shouldn't happen! */ 874 printk("mac_vmode_to_var(%d, %d,) failed\n", vmode, cmode); 875 try_again: 876 vmode = VMODE_640_480_60; 877 cmode = CMODE_8; 878 if (mac_vmode_to_var(vmode, cmode, &var) < 0) { 879 printk(KERN_ERR "controlfb: mac_vmode_to_var() failed\n"); 880 return -ENXIO; 881 } 882 printk(KERN_INFO "controlfb: "); 883 } 884 printk("using video mode %d and color mode %d.\n", vmode, cmode); 885 886 vyres = (p->total_vram - CTRLFB_OFF) / (var.xres << cmode); 887 if (vyres > var.yres) 888 var.yres_virtual = vyres; 889 890 /* Apply default var */ 891 var.activate = FB_ACTIVATE_NOW; 892 rc = fb_set_var(&p->info, &var); 893 if (rc && (vmode != VMODE_640_480_60 || cmode != CMODE_8)) 894 goto try_again; 895 896 /* Register with fbdev layer */ 897 if (register_framebuffer(&p->info) < 0) 898 return -ENXIO; 899 900 fb_info(&p->info, "control display adapter\n"); 901 902 return 0; 903 } 904 905 static void control_cleanup(void) 906 { 907 struct fb_info_control *p = control_fb; 908 909 if (!p) 910 return; 911 912 if (p->cmap_regs) 913 iounmap(p->cmap_regs); 914 if (p->control_regs) 915 iounmap(p->control_regs); 916 if (p->frame_buffer) { 917 if (p->control_use_bank2) 918 p->frame_buffer -= 0x600000; 919 iounmap(p->frame_buffer); 920 } 921 if (p->cmap_regs_phys) 922 release_mem_region(p->cmap_regs_phys, 0x1000); 923 if (p->control_regs_phys) 924 release_mem_region(p->control_regs_phys, p->control_regs_size); 925 if (p->fb_orig_base) 926 release_mem_region(p->fb_orig_base, p->fb_orig_size); 927 kfree(p); 928 } 929 930 /* 931 * find "control" and initialize 932 */ 933 static int __init control_of_init(struct device_node *dp) 934 { 935 struct fb_info_control *p; 936 struct resource fb_res, reg_res; 937 938 if (control_fb) { 939 printk(KERN_ERR "controlfb: only one control is supported\n"); 940 return -ENXIO; 941 } 942 943 if (of_pci_address_to_resource(dp, 2, &fb_res) || 944 of_pci_address_to_resource(dp, 1, ®_res)) { 945 printk(KERN_ERR "can't get 2 addresses for control\n"); 946 return -ENXIO; 947 } 948 p = kzalloc(sizeof(*p), GFP_KERNEL); 949 if (!p) 950 return -ENOMEM; 951 control_fb = p; /* save it for cleanups */ 952 953 /* Map in frame buffer and registers */ 954 p->fb_orig_base = fb_res.start; 955 p->fb_orig_size = resource_size(&fb_res); 956 /* use the big-endian aperture (??) */ 957 p->frame_buffer_phys = fb_res.start + 0x800000; 958 p->control_regs_phys = reg_res.start; 959 p->control_regs_size = resource_size(®_res); 960 961 if (!p->fb_orig_base || 962 !request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) { 963 p->fb_orig_base = 0; 964 goto error_out; 965 } 966 /* map at most 8MB for the frame buffer */ 967 p->frame_buffer = ioremap_wt(p->frame_buffer_phys, 0x800000); 968 969 if (!p->control_regs_phys || 970 !request_mem_region(p->control_regs_phys, p->control_regs_size, 971 "controlfb regs")) { 972 p->control_regs_phys = 0; 973 goto error_out; 974 } 975 p->control_regs = ioremap(p->control_regs_phys, p->control_regs_size); 976 977 p->cmap_regs_phys = 0xf301b000; /* XXX not in prom? */ 978 if (!request_mem_region(p->cmap_regs_phys, 0x1000, "controlfb cmap")) { 979 p->cmap_regs_phys = 0; 980 goto error_out; 981 } 982 p->cmap_regs = ioremap(p->cmap_regs_phys, 0x1000); 983 984 if (!p->cmap_regs || !p->control_regs || !p->frame_buffer) 985 goto error_out; 986 987 find_vram_size(p); 988 if (!p->total_vram) 989 goto error_out; 990 991 if (init_control(p) < 0) 992 goto error_out; 993 994 return 0; 995 996 error_out: 997 control_cleanup(); 998 return -ENXIO; 999 } 1000 1001 static int __init control_init(void) 1002 { 1003 struct device_node *dp; 1004 char *option = NULL; 1005 int ret = -ENXIO; 1006 1007 if (fb_get_options("controlfb", &option)) 1008 return -ENODEV; 1009 control_setup(option); 1010 1011 dp = of_find_node_by_name(NULL, "control"); 1012 if (dp && !control_of_init(dp)) 1013 ret = 0; 1014 of_node_put(dp); 1015 1016 return ret; 1017 } 1018 1019 device_initcall(control_init); 1020