1 /* $Id: aty128fb.c,v 1.1.1.1.36.1 1999/12/11 09:03:05 Exp $ 2 * linux/drivers/video/aty128fb.c -- Frame buffer device for ATI Rage128 3 * 4 * Copyright (C) 1999-2003, Brad Douglas <brad@neruo.com> 5 * Copyright (C) 1999, Anthony Tong <atong@uiuc.edu> 6 * 7 * Ani Joshi / Jeff Garzik 8 * - Code cleanup 9 * 10 * Michel Danzer <michdaen@iiic.ethz.ch> 11 * - 15/16 bit cleanup 12 * - fix panning 13 * 14 * Benjamin Herrenschmidt 15 * - pmac-specific PM stuff 16 * - various fixes & cleanups 17 * 18 * Andreas Hundt <andi@convergence.de> 19 * - FB_ACTIVATE fixes 20 * 21 * Paul Mackerras <paulus@samba.org> 22 * - Convert to new framebuffer API, 23 * fix colormap setting at 16 bits/pixel (565) 24 * 25 * Paul Mundt 26 * - PCI hotplug 27 * 28 * Jon Smirl <jonsmirl@yahoo.com> 29 * - PCI ID update 30 * - replace ROM BIOS search 31 * 32 * Based off of Geert's atyfb.c and vfb.c. 33 * 34 * TODO: 35 * - monitor sensing (DDC) 36 * - virtual display 37 * - other platform support (only ppc/x86 supported) 38 * - hardware cursor support 39 * 40 * Please cc: your patches to brad@neruo.com. 41 */ 42 43 /* 44 * A special note of gratitude to ATI's devrel for providing documentation, 45 * example code and hardware. Thanks Nitya. -atong and brad 46 */ 47 48 49 #include <linux/module.h> 50 #include <linux/moduleparam.h> 51 #include <linux/kernel.h> 52 #include <linux/errno.h> 53 #include <linux/string.h> 54 #include <linux/mm.h> 55 #include <linux/vmalloc.h> 56 #include <linux/delay.h> 57 #include <linux/interrupt.h> 58 #include <linux/uaccess.h> 59 #include <linux/fb.h> 60 #include <linux/init.h> 61 #include <linux/pci.h> 62 #include <linux/ioport.h> 63 #include <linux/console.h> 64 #include <linux/backlight.h> 65 #include <asm/io.h> 66 67 #ifdef CONFIG_PPC_PMAC 68 #include <asm/machdep.h> 69 #include <asm/pmac_feature.h> 70 #include <asm/prom.h> 71 #include <asm/pci-bridge.h> 72 #include "../macmodes.h" 73 #endif 74 75 #ifdef CONFIG_PMAC_BACKLIGHT 76 #include <asm/backlight.h> 77 #endif 78 79 #ifdef CONFIG_BOOTX_TEXT 80 #include <asm/btext.h> 81 #endif /* CONFIG_BOOTX_TEXT */ 82 83 #ifdef CONFIG_MTRR 84 #include <asm/mtrr.h> 85 #endif 86 87 #include <video/aty128.h> 88 89 /* Debug flag */ 90 #undef DEBUG 91 92 #ifdef DEBUG 93 #define DBG(fmt, args...) \ 94 printk(KERN_DEBUG "aty128fb: %s " fmt, __func__, ##args); 95 #else 96 #define DBG(fmt, args...) 97 #endif 98 99 #ifndef CONFIG_PPC_PMAC 100 /* default mode */ 101 static struct fb_var_screeninfo default_var = { 102 /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */ 103 640, 480, 640, 480, 0, 0, 8, 0, 104 {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 105 0, 0, -1, -1, 0, 39722, 48, 16, 33, 10, 96, 2, 106 0, FB_VMODE_NONINTERLACED 107 }; 108 109 #else /* CONFIG_PPC_PMAC */ 110 /* default to 1024x768 at 75Hz on PPC - this will work 111 * on the iMac, the usual 640x480 @ 60Hz doesn't. */ 112 static struct fb_var_screeninfo default_var = { 113 /* 1024x768, 75 Hz, Non-Interlaced (78.75 MHz dotclock) */ 114 1024, 768, 1024, 768, 0, 0, 8, 0, 115 {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 116 0, 0, -1, -1, 0, 12699, 160, 32, 28, 1, 96, 3, 117 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 118 FB_VMODE_NONINTERLACED 119 }; 120 #endif /* CONFIG_PPC_PMAC */ 121 122 /* default modedb mode */ 123 /* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */ 124 static struct fb_videomode defaultmode = { 125 .refresh = 60, 126 .xres = 640, 127 .yres = 480, 128 .pixclock = 39722, 129 .left_margin = 48, 130 .right_margin = 16, 131 .upper_margin = 33, 132 .lower_margin = 10, 133 .hsync_len = 96, 134 .vsync_len = 2, 135 .sync = 0, 136 .vmode = FB_VMODE_NONINTERLACED 137 }; 138 139 /* Chip generations */ 140 enum { 141 rage_128, 142 rage_128_pci, 143 rage_128_pro, 144 rage_128_pro_pci, 145 rage_M3, 146 rage_M3_pci, 147 rage_M4, 148 rage_128_ultra, 149 }; 150 151 /* Must match above enum */ 152 static char * const r128_family[] = { 153 "AGP", 154 "PCI", 155 "PRO AGP", 156 "PRO PCI", 157 "M3 AGP", 158 "M3 PCI", 159 "M4 AGP", 160 "Ultra AGP", 161 }; 162 163 /* 164 * PCI driver prototypes 165 */ 166 static int aty128_probe(struct pci_dev *pdev, 167 const struct pci_device_id *ent); 168 static void aty128_remove(struct pci_dev *pdev); 169 static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state); 170 static int aty128_pci_resume(struct pci_dev *pdev); 171 static int aty128_do_resume(struct pci_dev *pdev); 172 173 /* supported Rage128 chipsets */ 174 static struct pci_device_id aty128_pci_tbl[] = { 175 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LE, 176 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3_pci }, 177 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LF, 178 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3 }, 179 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_MF, 180 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 }, 181 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_ML, 182 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 }, 183 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PA, 184 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 185 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PB, 186 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 187 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PC, 188 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 189 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PD, 190 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci }, 191 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PE, 192 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 193 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PF, 194 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 195 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PG, 196 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 197 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PH, 198 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 199 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PI, 200 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 201 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PJ, 202 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 203 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PK, 204 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 205 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PL, 206 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 207 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PM, 208 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 209 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PN, 210 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 211 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PO, 212 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 213 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PP, 214 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci }, 215 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PQ, 216 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 217 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PR, 218 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci }, 219 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PS, 220 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 221 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PT, 222 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 223 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PU, 224 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 225 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PV, 226 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 227 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PW, 228 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 229 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PX, 230 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, 231 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RE, 232 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci }, 233 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RF, 234 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 235 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RG, 236 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 237 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RK, 238 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci }, 239 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RL, 240 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 241 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SE, 242 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 243 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SF, 244 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci }, 245 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SG, 246 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 247 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SH, 248 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 249 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SK, 250 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 251 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SL, 252 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 253 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SM, 254 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 255 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SN, 256 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, 257 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TF, 258 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, 259 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TL, 260 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, 261 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TR, 262 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, 263 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TS, 264 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, 265 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TT, 266 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, 267 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TU, 268 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, 269 { 0, } 270 }; 271 272 MODULE_DEVICE_TABLE(pci, aty128_pci_tbl); 273 274 static struct pci_driver aty128fb_driver = { 275 .name = "aty128fb", 276 .id_table = aty128_pci_tbl, 277 .probe = aty128_probe, 278 .remove = aty128_remove, 279 .suspend = aty128_pci_suspend, 280 .resume = aty128_pci_resume, 281 }; 282 283 /* packed BIOS settings */ 284 #ifndef CONFIG_PPC 285 typedef struct { 286 u8 clock_chip_type; 287 u8 struct_size; 288 u8 accelerator_entry; 289 u8 VGA_entry; 290 u16 VGA_table_offset; 291 u16 POST_table_offset; 292 u16 XCLK; 293 u16 MCLK; 294 u8 num_PLL_blocks; 295 u8 size_PLL_blocks; 296 u16 PCLK_ref_freq; 297 u16 PCLK_ref_divider; 298 u32 PCLK_min_freq; 299 u32 PCLK_max_freq; 300 u16 MCLK_ref_freq; 301 u16 MCLK_ref_divider; 302 u32 MCLK_min_freq; 303 u32 MCLK_max_freq; 304 u16 XCLK_ref_freq; 305 u16 XCLK_ref_divider; 306 u32 XCLK_min_freq; 307 u32 XCLK_max_freq; 308 } __attribute__ ((packed)) PLL_BLOCK; 309 #endif /* !CONFIG_PPC */ 310 311 /* onboard memory information */ 312 struct aty128_meminfo { 313 u8 ML; 314 u8 MB; 315 u8 Trcd; 316 u8 Trp; 317 u8 Twr; 318 u8 CL; 319 u8 Tr2w; 320 u8 LoopLatency; 321 u8 DspOn; 322 u8 Rloop; 323 const char *name; 324 }; 325 326 /* various memory configurations */ 327 static const struct aty128_meminfo sdr_128 = { 328 .ML = 4, 329 .MB = 4, 330 .Trcd = 3, 331 .Trp = 3, 332 .Twr = 1, 333 .CL = 3, 334 .Tr2w = 1, 335 .LoopLatency = 16, 336 .DspOn = 30, 337 .Rloop = 16, 338 .name = "128-bit SDR SGRAM (1:1)", 339 }; 340 341 static const struct aty128_meminfo sdr_64 = { 342 .ML = 4, 343 .MB = 8, 344 .Trcd = 3, 345 .Trp = 3, 346 .Twr = 1, 347 .CL = 3, 348 .Tr2w = 1, 349 .LoopLatency = 17, 350 .DspOn = 46, 351 .Rloop = 17, 352 .name = "64-bit SDR SGRAM (1:1)", 353 }; 354 355 static const struct aty128_meminfo sdr_sgram = { 356 .ML = 4, 357 .MB = 4, 358 .Trcd = 1, 359 .Trp = 2, 360 .Twr = 1, 361 .CL = 2, 362 .Tr2w = 1, 363 .LoopLatency = 16, 364 .DspOn = 24, 365 .Rloop = 16, 366 .name = "64-bit SDR SGRAM (2:1)", 367 }; 368 369 static const struct aty128_meminfo ddr_sgram = { 370 .ML = 4, 371 .MB = 4, 372 .Trcd = 3, 373 .Trp = 3, 374 .Twr = 2, 375 .CL = 3, 376 .Tr2w = 1, 377 .LoopLatency = 16, 378 .DspOn = 31, 379 .Rloop = 16, 380 .name = "64-bit DDR SGRAM", 381 }; 382 383 static struct fb_fix_screeninfo aty128fb_fix = { 384 .id = "ATY Rage128", 385 .type = FB_TYPE_PACKED_PIXELS, 386 .visual = FB_VISUAL_PSEUDOCOLOR, 387 .xpanstep = 8, 388 .ypanstep = 1, 389 .mmio_len = 0x2000, 390 .accel = FB_ACCEL_ATI_RAGE128, 391 }; 392 393 static char *mode_option = NULL; 394 395 #ifdef CONFIG_PPC_PMAC 396 static int default_vmode = VMODE_1024_768_60; 397 static int default_cmode = CMODE_8; 398 #endif 399 400 static int default_crt_on = 0; 401 static int default_lcd_on = 1; 402 403 #ifdef CONFIG_MTRR 404 static bool mtrr = true; 405 #endif 406 407 #ifdef CONFIG_FB_ATY128_BACKLIGHT 408 #ifdef CONFIG_PMAC_BACKLIGHT 409 static int backlight = 1; 410 #else 411 static int backlight = 0; 412 #endif 413 #endif 414 415 /* PLL constants */ 416 struct aty128_constants { 417 u32 ref_clk; 418 u32 ppll_min; 419 u32 ppll_max; 420 u32 ref_divider; 421 u32 xclk; 422 u32 fifo_width; 423 u32 fifo_depth; 424 }; 425 426 struct aty128_crtc { 427 u32 gen_cntl; 428 u32 h_total, h_sync_strt_wid; 429 u32 v_total, v_sync_strt_wid; 430 u32 pitch; 431 u32 offset, offset_cntl; 432 u32 xoffset, yoffset; 433 u32 vxres, vyres; 434 u32 depth, bpp; 435 }; 436 437 struct aty128_pll { 438 u32 post_divider; 439 u32 feedback_divider; 440 u32 vclk; 441 }; 442 443 struct aty128_ddafifo { 444 u32 dda_config; 445 u32 dda_on_off; 446 }; 447 448 /* register values for a specific mode */ 449 struct aty128fb_par { 450 struct aty128_crtc crtc; 451 struct aty128_pll pll; 452 struct aty128_ddafifo fifo_reg; 453 u32 accel_flags; 454 struct aty128_constants constants; /* PLL and others */ 455 void __iomem *regbase; /* remapped mmio */ 456 u32 vram_size; /* onboard video ram */ 457 int chip_gen; 458 const struct aty128_meminfo *mem; /* onboard mem info */ 459 #ifdef CONFIG_MTRR 460 struct { int vram; int vram_valid; } mtrr; 461 #endif 462 int blitter_may_be_busy; 463 int fifo_slots; /* free slots in FIFO (64 max) */ 464 465 int crt_on, lcd_on; 466 struct pci_dev *pdev; 467 struct fb_info *next; 468 int asleep; 469 int lock_blank; 470 471 u8 red[32]; /* see aty128fb_setcolreg */ 472 u8 green[64]; 473 u8 blue[32]; 474 u32 pseudo_palette[16]; /* used for TRUECOLOR */ 475 }; 476 477 478 #define round_div(n, d) ((n+(d/2))/d) 479 480 static int aty128fb_check_var(struct fb_var_screeninfo *var, 481 struct fb_info *info); 482 static int aty128fb_set_par(struct fb_info *info); 483 static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 484 u_int transp, struct fb_info *info); 485 static int aty128fb_pan_display(struct fb_var_screeninfo *var, 486 struct fb_info *fb); 487 static int aty128fb_blank(int blank, struct fb_info *fb); 488 static int aty128fb_ioctl(struct fb_info *info, u_int cmd, unsigned long arg); 489 static int aty128fb_sync(struct fb_info *info); 490 491 /* 492 * Internal routines 493 */ 494 495 static int aty128_encode_var(struct fb_var_screeninfo *var, 496 const struct aty128fb_par *par); 497 static int aty128_decode_var(struct fb_var_screeninfo *var, 498 struct aty128fb_par *par); 499 #if 0 500 static void aty128_get_pllinfo(struct aty128fb_par *par, void __iomem *bios); 501 static void __iomem *aty128_map_ROM(struct pci_dev *pdev, 502 const struct aty128fb_par *par); 503 #endif 504 static void aty128_timings(struct aty128fb_par *par); 505 static void aty128_init_engine(struct aty128fb_par *par); 506 static void aty128_reset_engine(const struct aty128fb_par *par); 507 static void aty128_flush_pixel_cache(const struct aty128fb_par *par); 508 static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par); 509 static void wait_for_fifo(u16 entries, struct aty128fb_par *par); 510 static void wait_for_idle(struct aty128fb_par *par); 511 static u32 depth_to_dst(u32 depth); 512 513 #ifdef CONFIG_FB_ATY128_BACKLIGHT 514 static void aty128_bl_set_power(struct fb_info *info, int power); 515 #endif 516 517 #define BIOS_IN8(v) (readb(bios + (v))) 518 #define BIOS_IN16(v) (readb(bios + (v)) | \ 519 (readb(bios + (v) + 1) << 8)) 520 #define BIOS_IN32(v) (readb(bios + (v)) | \ 521 (readb(bios + (v) + 1) << 8) | \ 522 (readb(bios + (v) + 2) << 16) | \ 523 (readb(bios + (v) + 3) << 24)) 524 525 526 static struct fb_ops aty128fb_ops = { 527 .owner = THIS_MODULE, 528 .fb_check_var = aty128fb_check_var, 529 .fb_set_par = aty128fb_set_par, 530 .fb_setcolreg = aty128fb_setcolreg, 531 .fb_pan_display = aty128fb_pan_display, 532 .fb_blank = aty128fb_blank, 533 .fb_ioctl = aty128fb_ioctl, 534 .fb_sync = aty128fb_sync, 535 .fb_fillrect = cfb_fillrect, 536 .fb_copyarea = cfb_copyarea, 537 .fb_imageblit = cfb_imageblit, 538 }; 539 540 /* 541 * Functions to read from/write to the mmio registers 542 * - endian conversions may possibly be avoided by 543 * using the other register aperture. TODO. 544 */ 545 static inline u32 _aty_ld_le32(volatile unsigned int regindex, 546 const struct aty128fb_par *par) 547 { 548 return readl (par->regbase + regindex); 549 } 550 551 static inline void _aty_st_le32(volatile unsigned int regindex, u32 val, 552 const struct aty128fb_par *par) 553 { 554 writel (val, par->regbase + regindex); 555 } 556 557 static inline u8 _aty_ld_8(unsigned int regindex, 558 const struct aty128fb_par *par) 559 { 560 return readb (par->regbase + regindex); 561 } 562 563 static inline void _aty_st_8(unsigned int regindex, u8 val, 564 const struct aty128fb_par *par) 565 { 566 writeb (val, par->regbase + regindex); 567 } 568 569 #define aty_ld_le32(regindex) _aty_ld_le32(regindex, par) 570 #define aty_st_le32(regindex, val) _aty_st_le32(regindex, val, par) 571 #define aty_ld_8(regindex) _aty_ld_8(regindex, par) 572 #define aty_st_8(regindex, val) _aty_st_8(regindex, val, par) 573 574 /* 575 * Functions to read from/write to the pll registers 576 */ 577 578 #define aty_ld_pll(pll_index) _aty_ld_pll(pll_index, par) 579 #define aty_st_pll(pll_index, val) _aty_st_pll(pll_index, val, par) 580 581 582 static u32 _aty_ld_pll(unsigned int pll_index, 583 const struct aty128fb_par *par) 584 { 585 aty_st_8(CLOCK_CNTL_INDEX, pll_index & 0x3F); 586 return aty_ld_le32(CLOCK_CNTL_DATA); 587 } 588 589 590 static void _aty_st_pll(unsigned int pll_index, u32 val, 591 const struct aty128fb_par *par) 592 { 593 aty_st_8(CLOCK_CNTL_INDEX, (pll_index & 0x3F) | PLL_WR_EN); 594 aty_st_le32(CLOCK_CNTL_DATA, val); 595 } 596 597 598 /* return true when the PLL has completed an atomic update */ 599 static int aty_pll_readupdate(const struct aty128fb_par *par) 600 { 601 return !(aty_ld_pll(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R); 602 } 603 604 605 static void aty_pll_wait_readupdate(const struct aty128fb_par *par) 606 { 607 unsigned long timeout = jiffies + HZ/100; // should be more than enough 608 int reset = 1; 609 610 while (time_before(jiffies, timeout)) 611 if (aty_pll_readupdate(par)) { 612 reset = 0; 613 break; 614 } 615 616 if (reset) /* reset engine?? */ 617 printk(KERN_DEBUG "aty128fb: PLL write timeout!\n"); 618 } 619 620 621 /* tell PLL to update */ 622 static void aty_pll_writeupdate(const struct aty128fb_par *par) 623 { 624 aty_pll_wait_readupdate(par); 625 626 aty_st_pll(PPLL_REF_DIV, 627 aty_ld_pll(PPLL_REF_DIV) | PPLL_ATOMIC_UPDATE_W); 628 } 629 630 631 /* write to the scratch register to test r/w functionality */ 632 static int register_test(const struct aty128fb_par *par) 633 { 634 u32 val; 635 int flag = 0; 636 637 val = aty_ld_le32(BIOS_0_SCRATCH); 638 639 aty_st_le32(BIOS_0_SCRATCH, 0x55555555); 640 if (aty_ld_le32(BIOS_0_SCRATCH) == 0x55555555) { 641 aty_st_le32(BIOS_0_SCRATCH, 0xAAAAAAAA); 642 643 if (aty_ld_le32(BIOS_0_SCRATCH) == 0xAAAAAAAA) 644 flag = 1; 645 } 646 647 aty_st_le32(BIOS_0_SCRATCH, val); // restore value 648 return flag; 649 } 650 651 652 /* 653 * Accelerator engine functions 654 */ 655 static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par) 656 { 657 int i; 658 659 for (;;) { 660 for (i = 0; i < 2000000; i++) { 661 par->fifo_slots = aty_ld_le32(GUI_STAT) & 0x0fff; 662 if (par->fifo_slots >= entries) 663 return; 664 } 665 aty128_reset_engine(par); 666 } 667 } 668 669 670 static void wait_for_idle(struct aty128fb_par *par) 671 { 672 int i; 673 674 do_wait_for_fifo(64, par); 675 676 for (;;) { 677 for (i = 0; i < 2000000; i++) { 678 if (!(aty_ld_le32(GUI_STAT) & (1 << 31))) { 679 aty128_flush_pixel_cache(par); 680 par->blitter_may_be_busy = 0; 681 return; 682 } 683 } 684 aty128_reset_engine(par); 685 } 686 } 687 688 689 static void wait_for_fifo(u16 entries, struct aty128fb_par *par) 690 { 691 if (par->fifo_slots < entries) 692 do_wait_for_fifo(64, par); 693 par->fifo_slots -= entries; 694 } 695 696 697 static void aty128_flush_pixel_cache(const struct aty128fb_par *par) 698 { 699 int i; 700 u32 tmp; 701 702 tmp = aty_ld_le32(PC_NGUI_CTLSTAT); 703 tmp &= ~(0x00ff); 704 tmp |= 0x00ff; 705 aty_st_le32(PC_NGUI_CTLSTAT, tmp); 706 707 for (i = 0; i < 2000000; i++) 708 if (!(aty_ld_le32(PC_NGUI_CTLSTAT) & PC_BUSY)) 709 break; 710 } 711 712 713 static void aty128_reset_engine(const struct aty128fb_par *par) 714 { 715 u32 gen_reset_cntl, clock_cntl_index, mclk_cntl; 716 717 aty128_flush_pixel_cache(par); 718 719 clock_cntl_index = aty_ld_le32(CLOCK_CNTL_INDEX); 720 mclk_cntl = aty_ld_pll(MCLK_CNTL); 721 722 aty_st_pll(MCLK_CNTL, mclk_cntl | 0x00030000); 723 724 gen_reset_cntl = aty_ld_le32(GEN_RESET_CNTL); 725 aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl | SOFT_RESET_GUI); 726 aty_ld_le32(GEN_RESET_CNTL); 727 aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl & ~(SOFT_RESET_GUI)); 728 aty_ld_le32(GEN_RESET_CNTL); 729 730 aty_st_pll(MCLK_CNTL, mclk_cntl); 731 aty_st_le32(CLOCK_CNTL_INDEX, clock_cntl_index); 732 aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl); 733 734 /* use old pio mode */ 735 aty_st_le32(PM4_BUFFER_CNTL, PM4_BUFFER_CNTL_NONPM4); 736 737 DBG("engine reset"); 738 } 739 740 741 static void aty128_init_engine(struct aty128fb_par *par) 742 { 743 u32 pitch_value; 744 745 wait_for_idle(par); 746 747 /* 3D scaler not spoken here */ 748 wait_for_fifo(1, par); 749 aty_st_le32(SCALE_3D_CNTL, 0x00000000); 750 751 aty128_reset_engine(par); 752 753 pitch_value = par->crtc.pitch; 754 if (par->crtc.bpp == 24) { 755 pitch_value = pitch_value * 3; 756 } 757 758 wait_for_fifo(4, par); 759 /* setup engine offset registers */ 760 aty_st_le32(DEFAULT_OFFSET, 0x00000000); 761 762 /* setup engine pitch registers */ 763 aty_st_le32(DEFAULT_PITCH, pitch_value); 764 765 /* set the default scissor register to max dimensions */ 766 aty_st_le32(DEFAULT_SC_BOTTOM_RIGHT, (0x1FFF << 16) | 0x1FFF); 767 768 /* set the drawing controls registers */ 769 aty_st_le32(DP_GUI_MASTER_CNTL, 770 GMC_SRC_PITCH_OFFSET_DEFAULT | 771 GMC_DST_PITCH_OFFSET_DEFAULT | 772 GMC_SRC_CLIP_DEFAULT | 773 GMC_DST_CLIP_DEFAULT | 774 GMC_BRUSH_SOLIDCOLOR | 775 (depth_to_dst(par->crtc.depth) << 8) | 776 GMC_SRC_DSTCOLOR | 777 GMC_BYTE_ORDER_MSB_TO_LSB | 778 GMC_DP_CONVERSION_TEMP_6500 | 779 ROP3_PATCOPY | 780 GMC_DP_SRC_RECT | 781 GMC_3D_FCN_EN_CLR | 782 GMC_DST_CLR_CMP_FCN_CLEAR | 783 GMC_AUX_CLIP_CLEAR | 784 GMC_WRITE_MASK_SET); 785 786 wait_for_fifo(8, par); 787 /* clear the line drawing registers */ 788 aty_st_le32(DST_BRES_ERR, 0); 789 aty_st_le32(DST_BRES_INC, 0); 790 aty_st_le32(DST_BRES_DEC, 0); 791 792 /* set brush color registers */ 793 aty_st_le32(DP_BRUSH_FRGD_CLR, 0xFFFFFFFF); /* white */ 794 aty_st_le32(DP_BRUSH_BKGD_CLR, 0x00000000); /* black */ 795 796 /* set source color registers */ 797 aty_st_le32(DP_SRC_FRGD_CLR, 0xFFFFFFFF); /* white */ 798 aty_st_le32(DP_SRC_BKGD_CLR, 0x00000000); /* black */ 799 800 /* default write mask */ 801 aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF); 802 803 /* Wait for all the writes to be completed before returning */ 804 wait_for_idle(par); 805 } 806 807 808 /* convert depth values to their register representation */ 809 static u32 depth_to_dst(u32 depth) 810 { 811 if (depth <= 8) 812 return DST_8BPP; 813 else if (depth <= 15) 814 return DST_15BPP; 815 else if (depth == 16) 816 return DST_16BPP; 817 else if (depth <= 24) 818 return DST_24BPP; 819 else if (depth <= 32) 820 return DST_32BPP; 821 822 return -EINVAL; 823 } 824 825 /* 826 * PLL informations retreival 827 */ 828 829 830 #ifndef __sparc__ 831 static void __iomem *aty128_map_ROM(const struct aty128fb_par *par, 832 struct pci_dev *dev) 833 { 834 u16 dptr; 835 u8 rom_type; 836 void __iomem *bios; 837 size_t rom_size; 838 839 /* Fix from ATI for problem with Rage128 hardware not leaving ROM enabled */ 840 unsigned int temp; 841 temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG); 842 temp &= 0x00ffffffu; 843 temp |= 0x04 << 24; 844 aty_st_le32(RAGE128_MPP_TB_CONFIG, temp); 845 temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG); 846 847 bios = pci_map_rom(dev, &rom_size); 848 849 if (!bios) { 850 printk(KERN_ERR "aty128fb: ROM failed to map\n"); 851 return NULL; 852 } 853 854 /* Very simple test to make sure it appeared */ 855 if (BIOS_IN16(0) != 0xaa55) { 856 printk(KERN_DEBUG "aty128fb: Invalid ROM signature %x should " 857 " be 0xaa55\n", BIOS_IN16(0)); 858 goto failed; 859 } 860 861 /* Look for the PCI data to check the ROM type */ 862 dptr = BIOS_IN16(0x18); 863 864 /* Check the PCI data signature. If it's wrong, we still assume a normal 865 * x86 ROM for now, until I've verified this works everywhere. 866 * The goal here is more to phase out Open Firmware images. 867 * 868 * Currently, we only look at the first PCI data, we could iteratre and 869 * deal with them all, and we should use fb_bios_start relative to start 870 * of image and not relative start of ROM, but so far, I never found a 871 * dual-image ATI card. 872 * 873 * typedef struct { 874 * u32 signature; + 0x00 875 * u16 vendor; + 0x04 876 * u16 device; + 0x06 877 * u16 reserved_1; + 0x08 878 * u16 dlen; + 0x0a 879 * u8 drevision; + 0x0c 880 * u8 class_hi; + 0x0d 881 * u16 class_lo; + 0x0e 882 * u16 ilen; + 0x10 883 * u16 irevision; + 0x12 884 * u8 type; + 0x14 885 * u8 indicator; + 0x15 886 * u16 reserved_2; + 0x16 887 * } pci_data_t; 888 */ 889 if (BIOS_IN32(dptr) != (('R' << 24) | ('I' << 16) | ('C' << 8) | 'P')) { 890 printk(KERN_WARNING "aty128fb: PCI DATA signature in ROM incorrect: %08x\n", 891 BIOS_IN32(dptr)); 892 goto anyway; 893 } 894 rom_type = BIOS_IN8(dptr + 0x14); 895 switch(rom_type) { 896 case 0: 897 printk(KERN_INFO "aty128fb: Found Intel x86 BIOS ROM Image\n"); 898 break; 899 case 1: 900 printk(KERN_INFO "aty128fb: Found Open Firmware ROM Image\n"); 901 goto failed; 902 case 2: 903 printk(KERN_INFO "aty128fb: Found HP PA-RISC ROM Image\n"); 904 goto failed; 905 default: 906 printk(KERN_INFO "aty128fb: Found unknown type %d ROM Image\n", 907 rom_type); 908 goto failed; 909 } 910 anyway: 911 return bios; 912 913 failed: 914 pci_unmap_rom(dev, bios); 915 return NULL; 916 } 917 918 static void aty128_get_pllinfo(struct aty128fb_par *par, 919 unsigned char __iomem *bios) 920 { 921 unsigned int bios_hdr; 922 unsigned int bios_pll; 923 924 bios_hdr = BIOS_IN16(0x48); 925 bios_pll = BIOS_IN16(bios_hdr + 0x30); 926 927 par->constants.ppll_max = BIOS_IN32(bios_pll + 0x16); 928 par->constants.ppll_min = BIOS_IN32(bios_pll + 0x12); 929 par->constants.xclk = BIOS_IN16(bios_pll + 0x08); 930 par->constants.ref_divider = BIOS_IN16(bios_pll + 0x10); 931 par->constants.ref_clk = BIOS_IN16(bios_pll + 0x0e); 932 933 DBG("ppll_max %d ppll_min %d xclk %d ref_divider %d ref clock %d\n", 934 par->constants.ppll_max, par->constants.ppll_min, 935 par->constants.xclk, par->constants.ref_divider, 936 par->constants.ref_clk); 937 938 } 939 940 #ifdef CONFIG_X86 941 static void __iomem *aty128_find_mem_vbios(struct aty128fb_par *par) 942 { 943 /* I simplified this code as we used to miss the signatures in 944 * a lot of case. It's now closer to XFree, we just don't check 945 * for signatures at all... Something better will have to be done 946 * if we end up having conflicts 947 */ 948 u32 segstart; 949 unsigned char __iomem *rom_base = NULL; 950 951 for (segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) { 952 rom_base = ioremap(segstart, 0x10000); 953 if (rom_base == NULL) 954 return NULL; 955 if (readb(rom_base) == 0x55 && readb(rom_base + 1) == 0xaa) 956 break; 957 iounmap(rom_base); 958 rom_base = NULL; 959 } 960 return rom_base; 961 } 962 #endif 963 #endif /* ndef(__sparc__) */ 964 965 /* fill in known card constants if pll_block is not available */ 966 static void aty128_timings(struct aty128fb_par *par) 967 { 968 #ifdef CONFIG_PPC 969 /* instead of a table lookup, assume OF has properly 970 * setup the PLL registers and use their values 971 * to set the XCLK values and reference divider values */ 972 973 u32 x_mpll_ref_fb_div; 974 u32 xclk_cntl; 975 u32 Nx, M; 976 unsigned PostDivSet[] = { 0, 1, 2, 4, 8, 3, 6, 12 }; 977 #endif 978 979 if (!par->constants.ref_clk) 980 par->constants.ref_clk = 2950; 981 982 #ifdef CONFIG_PPC 983 x_mpll_ref_fb_div = aty_ld_pll(X_MPLL_REF_FB_DIV); 984 xclk_cntl = aty_ld_pll(XCLK_CNTL) & 0x7; 985 Nx = (x_mpll_ref_fb_div & 0x00ff00) >> 8; 986 M = x_mpll_ref_fb_div & 0x0000ff; 987 988 par->constants.xclk = round_div((2 * Nx * par->constants.ref_clk), 989 (M * PostDivSet[xclk_cntl])); 990 991 par->constants.ref_divider = 992 aty_ld_pll(PPLL_REF_DIV) & PPLL_REF_DIV_MASK; 993 #endif 994 995 if (!par->constants.ref_divider) { 996 par->constants.ref_divider = 0x3b; 997 998 aty_st_pll(X_MPLL_REF_FB_DIV, 0x004c4c1e); 999 aty_pll_writeupdate(par); 1000 } 1001 aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider); 1002 aty_pll_writeupdate(par); 1003 1004 /* from documentation */ 1005 if (!par->constants.ppll_min) 1006 par->constants.ppll_min = 12500; 1007 if (!par->constants.ppll_max) 1008 par->constants.ppll_max = 25000; /* 23000 on some cards? */ 1009 if (!par->constants.xclk) 1010 par->constants.xclk = 0x1d4d; /* same as mclk */ 1011 1012 par->constants.fifo_width = 128; 1013 par->constants.fifo_depth = 32; 1014 1015 switch (aty_ld_le32(MEM_CNTL) & 0x3) { 1016 case 0: 1017 par->mem = &sdr_128; 1018 break; 1019 case 1: 1020 par->mem = &sdr_sgram; 1021 break; 1022 case 2: 1023 par->mem = &ddr_sgram; 1024 break; 1025 default: 1026 par->mem = &sdr_sgram; 1027 } 1028 } 1029 1030 1031 1032 /* 1033 * CRTC programming 1034 */ 1035 1036 /* Program the CRTC registers */ 1037 static void aty128_set_crtc(const struct aty128_crtc *crtc, 1038 const struct aty128fb_par *par) 1039 { 1040 aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl); 1041 aty_st_le32(CRTC_H_TOTAL_DISP, crtc->h_total); 1042 aty_st_le32(CRTC_H_SYNC_STRT_WID, crtc->h_sync_strt_wid); 1043 aty_st_le32(CRTC_V_TOTAL_DISP, crtc->v_total); 1044 aty_st_le32(CRTC_V_SYNC_STRT_WID, crtc->v_sync_strt_wid); 1045 aty_st_le32(CRTC_PITCH, crtc->pitch); 1046 aty_st_le32(CRTC_OFFSET, crtc->offset); 1047 aty_st_le32(CRTC_OFFSET_CNTL, crtc->offset_cntl); 1048 /* Disable ATOMIC updating. Is this the right place? */ 1049 aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~(0x00030000)); 1050 } 1051 1052 1053 static int aty128_var_to_crtc(const struct fb_var_screeninfo *var, 1054 struct aty128_crtc *crtc, 1055 const struct aty128fb_par *par) 1056 { 1057 u32 xres, yres, vxres, vyres, xoffset, yoffset, bpp, dst; 1058 u32 left, right, upper, lower, hslen, vslen, sync, vmode; 1059 u32 h_total, h_disp, h_sync_strt, h_sync_wid, h_sync_pol; 1060 u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync; 1061 u32 depth, bytpp; 1062 u8 mode_bytpp[7] = { 0, 0, 1, 2, 2, 3, 4 }; 1063 1064 /* input */ 1065 xres = var->xres; 1066 yres = var->yres; 1067 vxres = var->xres_virtual; 1068 vyres = var->yres_virtual; 1069 xoffset = var->xoffset; 1070 yoffset = var->yoffset; 1071 bpp = var->bits_per_pixel; 1072 left = var->left_margin; 1073 right = var->right_margin; 1074 upper = var->upper_margin; 1075 lower = var->lower_margin; 1076 hslen = var->hsync_len; 1077 vslen = var->vsync_len; 1078 sync = var->sync; 1079 vmode = var->vmode; 1080 1081 if (bpp != 16) 1082 depth = bpp; 1083 else 1084 depth = (var->green.length == 6) ? 16 : 15; 1085 1086 /* check for mode eligibility 1087 * accept only non interlaced modes */ 1088 if ((vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) 1089 return -EINVAL; 1090 1091 /* convert (and round up) and validate */ 1092 xres = (xres + 7) & ~7; 1093 xoffset = (xoffset + 7) & ~7; 1094 1095 if (vxres < xres + xoffset) 1096 vxres = xres + xoffset; 1097 1098 if (vyres < yres + yoffset) 1099 vyres = yres + yoffset; 1100 1101 /* convert depth into ATI register depth */ 1102 dst = depth_to_dst(depth); 1103 1104 if (dst == -EINVAL) { 1105 printk(KERN_ERR "aty128fb: Invalid depth or RGBA\n"); 1106 return -EINVAL; 1107 } 1108 1109 /* convert register depth to bytes per pixel */ 1110 bytpp = mode_bytpp[dst]; 1111 1112 /* make sure there is enough video ram for the mode */ 1113 if ((u32)(vxres * vyres * bytpp) > par->vram_size) { 1114 printk(KERN_ERR "aty128fb: Not enough memory for mode\n"); 1115 return -EINVAL; 1116 } 1117 1118 h_disp = (xres >> 3) - 1; 1119 h_total = (((xres + right + hslen + left) >> 3) - 1) & 0xFFFFL; 1120 1121 v_disp = yres - 1; 1122 v_total = (yres + upper + vslen + lower - 1) & 0xFFFFL; 1123 1124 /* check to make sure h_total and v_total are in range */ 1125 if (((h_total >> 3) - 1) > 0x1ff || (v_total - 1) > 0x7FF) { 1126 printk(KERN_ERR "aty128fb: invalid width ranges\n"); 1127 return -EINVAL; 1128 } 1129 1130 h_sync_wid = (hslen + 7) >> 3; 1131 if (h_sync_wid == 0) 1132 h_sync_wid = 1; 1133 else if (h_sync_wid > 0x3f) /* 0x3f = max hwidth */ 1134 h_sync_wid = 0x3f; 1135 1136 h_sync_strt = (h_disp << 3) + right; 1137 1138 v_sync_wid = vslen; 1139 if (v_sync_wid == 0) 1140 v_sync_wid = 1; 1141 else if (v_sync_wid > 0x1f) /* 0x1f = max vwidth */ 1142 v_sync_wid = 0x1f; 1143 1144 v_sync_strt = v_disp + lower; 1145 1146 h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1; 1147 v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1; 1148 1149 c_sync = sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0; 1150 1151 crtc->gen_cntl = 0x3000000L | c_sync | (dst << 8); 1152 1153 crtc->h_total = h_total | (h_disp << 16); 1154 crtc->v_total = v_total | (v_disp << 16); 1155 1156 crtc->h_sync_strt_wid = h_sync_strt | (h_sync_wid << 16) | 1157 (h_sync_pol << 23); 1158 crtc->v_sync_strt_wid = v_sync_strt | (v_sync_wid << 16) | 1159 (v_sync_pol << 23); 1160 1161 crtc->pitch = vxres >> 3; 1162 1163 crtc->offset = 0; 1164 1165 if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) 1166 crtc->offset_cntl = 0x00010000; 1167 else 1168 crtc->offset_cntl = 0; 1169 1170 crtc->vxres = vxres; 1171 crtc->vyres = vyres; 1172 crtc->xoffset = xoffset; 1173 crtc->yoffset = yoffset; 1174 crtc->depth = depth; 1175 crtc->bpp = bpp; 1176 1177 return 0; 1178 } 1179 1180 1181 static int aty128_pix_width_to_var(int pix_width, struct fb_var_screeninfo *var) 1182 { 1183 1184 /* fill in pixel info */ 1185 var->red.msb_right = 0; 1186 var->green.msb_right = 0; 1187 var->blue.offset = 0; 1188 var->blue.msb_right = 0; 1189 var->transp.offset = 0; 1190 var->transp.length = 0; 1191 var->transp.msb_right = 0; 1192 switch (pix_width) { 1193 case CRTC_PIX_WIDTH_8BPP: 1194 var->bits_per_pixel = 8; 1195 var->red.offset = 0; 1196 var->red.length = 8; 1197 var->green.offset = 0; 1198 var->green.length = 8; 1199 var->blue.length = 8; 1200 break; 1201 case CRTC_PIX_WIDTH_15BPP: 1202 var->bits_per_pixel = 16; 1203 var->red.offset = 10; 1204 var->red.length = 5; 1205 var->green.offset = 5; 1206 var->green.length = 5; 1207 var->blue.length = 5; 1208 break; 1209 case CRTC_PIX_WIDTH_16BPP: 1210 var->bits_per_pixel = 16; 1211 var->red.offset = 11; 1212 var->red.length = 5; 1213 var->green.offset = 5; 1214 var->green.length = 6; 1215 var->blue.length = 5; 1216 break; 1217 case CRTC_PIX_WIDTH_24BPP: 1218 var->bits_per_pixel = 24; 1219 var->red.offset = 16; 1220 var->red.length = 8; 1221 var->green.offset = 8; 1222 var->green.length = 8; 1223 var->blue.length = 8; 1224 break; 1225 case CRTC_PIX_WIDTH_32BPP: 1226 var->bits_per_pixel = 32; 1227 var->red.offset = 16; 1228 var->red.length = 8; 1229 var->green.offset = 8; 1230 var->green.length = 8; 1231 var->blue.length = 8; 1232 var->transp.offset = 24; 1233 var->transp.length = 8; 1234 break; 1235 default: 1236 printk(KERN_ERR "aty128fb: Invalid pixel width\n"); 1237 return -EINVAL; 1238 } 1239 1240 return 0; 1241 } 1242 1243 1244 static int aty128_crtc_to_var(const struct aty128_crtc *crtc, 1245 struct fb_var_screeninfo *var) 1246 { 1247 u32 xres, yres, left, right, upper, lower, hslen, vslen, sync; 1248 u32 h_total, h_disp, h_sync_strt, h_sync_dly, h_sync_wid, h_sync_pol; 1249 u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync; 1250 u32 pix_width; 1251 1252 /* fun with masking */ 1253 h_total = crtc->h_total & 0x1ff; 1254 h_disp = (crtc->h_total >> 16) & 0xff; 1255 h_sync_strt = (crtc->h_sync_strt_wid >> 3) & 0x1ff; 1256 h_sync_dly = crtc->h_sync_strt_wid & 0x7; 1257 h_sync_wid = (crtc->h_sync_strt_wid >> 16) & 0x3f; 1258 h_sync_pol = (crtc->h_sync_strt_wid >> 23) & 0x1; 1259 v_total = crtc->v_total & 0x7ff; 1260 v_disp = (crtc->v_total >> 16) & 0x7ff; 1261 v_sync_strt = crtc->v_sync_strt_wid & 0x7ff; 1262 v_sync_wid = (crtc->v_sync_strt_wid >> 16) & 0x1f; 1263 v_sync_pol = (crtc->v_sync_strt_wid >> 23) & 0x1; 1264 c_sync = crtc->gen_cntl & CRTC_CSYNC_EN ? 1 : 0; 1265 pix_width = crtc->gen_cntl & CRTC_PIX_WIDTH_MASK; 1266 1267 /* do conversions */ 1268 xres = (h_disp + 1) << 3; 1269 yres = v_disp + 1; 1270 left = ((h_total - h_sync_strt - h_sync_wid) << 3) - h_sync_dly; 1271 right = ((h_sync_strt - h_disp) << 3) + h_sync_dly; 1272 hslen = h_sync_wid << 3; 1273 upper = v_total - v_sync_strt - v_sync_wid; 1274 lower = v_sync_strt - v_disp; 1275 vslen = v_sync_wid; 1276 sync = (h_sync_pol ? 0 : FB_SYNC_HOR_HIGH_ACT) | 1277 (v_sync_pol ? 0 : FB_SYNC_VERT_HIGH_ACT) | 1278 (c_sync ? FB_SYNC_COMP_HIGH_ACT : 0); 1279 1280 aty128_pix_width_to_var(pix_width, var); 1281 1282 var->xres = xres; 1283 var->yres = yres; 1284 var->xres_virtual = crtc->vxres; 1285 var->yres_virtual = crtc->vyres; 1286 var->xoffset = crtc->xoffset; 1287 var->yoffset = crtc->yoffset; 1288 var->left_margin = left; 1289 var->right_margin = right; 1290 var->upper_margin = upper; 1291 var->lower_margin = lower; 1292 var->hsync_len = hslen; 1293 var->vsync_len = vslen; 1294 var->sync = sync; 1295 var->vmode = FB_VMODE_NONINTERLACED; 1296 1297 return 0; 1298 } 1299 1300 static void aty128_set_crt_enable(struct aty128fb_par *par, int on) 1301 { 1302 if (on) { 1303 aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) | 1304 CRT_CRTC_ON); 1305 aty_st_le32(DAC_CNTL, (aty_ld_le32(DAC_CNTL) | 1306 DAC_PALETTE2_SNOOP_EN)); 1307 } else 1308 aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) & 1309 ~CRT_CRTC_ON); 1310 } 1311 1312 static void aty128_set_lcd_enable(struct aty128fb_par *par, int on) 1313 { 1314 u32 reg; 1315 #ifdef CONFIG_FB_ATY128_BACKLIGHT 1316 struct fb_info *info = pci_get_drvdata(par->pdev); 1317 #endif 1318 1319 if (on) { 1320 reg = aty_ld_le32(LVDS_GEN_CNTL); 1321 reg |= LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION; 1322 reg &= ~LVDS_DISPLAY_DIS; 1323 aty_st_le32(LVDS_GEN_CNTL, reg); 1324 #ifdef CONFIG_FB_ATY128_BACKLIGHT 1325 aty128_bl_set_power(info, FB_BLANK_UNBLANK); 1326 #endif 1327 } else { 1328 #ifdef CONFIG_FB_ATY128_BACKLIGHT 1329 aty128_bl_set_power(info, FB_BLANK_POWERDOWN); 1330 #endif 1331 reg = aty_ld_le32(LVDS_GEN_CNTL); 1332 reg |= LVDS_DISPLAY_DIS; 1333 aty_st_le32(LVDS_GEN_CNTL, reg); 1334 mdelay(100); 1335 reg &= ~(LVDS_ON /*| LVDS_EN*/); 1336 aty_st_le32(LVDS_GEN_CNTL, reg); 1337 } 1338 } 1339 1340 static void aty128_set_pll(struct aty128_pll *pll, 1341 const struct aty128fb_par *par) 1342 { 1343 u32 div3; 1344 1345 unsigned char post_conv[] = /* register values for post dividers */ 1346 { 2, 0, 1, 4, 2, 2, 6, 2, 3, 2, 2, 2, 7 }; 1347 1348 /* select PPLL_DIV_3 */ 1349 aty_st_le32(CLOCK_CNTL_INDEX, aty_ld_le32(CLOCK_CNTL_INDEX) | (3 << 8)); 1350 1351 /* reset PLL */ 1352 aty_st_pll(PPLL_CNTL, 1353 aty_ld_pll(PPLL_CNTL) | PPLL_RESET | PPLL_ATOMIC_UPDATE_EN); 1354 1355 /* write the reference divider */ 1356 aty_pll_wait_readupdate(par); 1357 aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider & 0x3ff); 1358 aty_pll_writeupdate(par); 1359 1360 div3 = aty_ld_pll(PPLL_DIV_3); 1361 div3 &= ~PPLL_FB3_DIV_MASK; 1362 div3 |= pll->feedback_divider; 1363 div3 &= ~PPLL_POST3_DIV_MASK; 1364 div3 |= post_conv[pll->post_divider] << 16; 1365 1366 /* write feedback and post dividers */ 1367 aty_pll_wait_readupdate(par); 1368 aty_st_pll(PPLL_DIV_3, div3); 1369 aty_pll_writeupdate(par); 1370 1371 aty_pll_wait_readupdate(par); 1372 aty_st_pll(HTOTAL_CNTL, 0); /* no horiz crtc adjustment */ 1373 aty_pll_writeupdate(par); 1374 1375 /* clear the reset, just in case */ 1376 aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~PPLL_RESET); 1377 } 1378 1379 1380 static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll, 1381 const struct aty128fb_par *par) 1382 { 1383 const struct aty128_constants c = par->constants; 1384 unsigned char post_dividers[] = {1,2,4,8,3,6,12}; 1385 u32 output_freq; 1386 u32 vclk; /* in .01 MHz */ 1387 int i = 0; 1388 u32 n, d; 1389 1390 vclk = 100000000 / period_in_ps; /* convert units to 10 kHz */ 1391 1392 /* adjust pixel clock if necessary */ 1393 if (vclk > c.ppll_max) 1394 vclk = c.ppll_max; 1395 if (vclk * 12 < c.ppll_min) 1396 vclk = c.ppll_min/12; 1397 1398 /* now, find an acceptable divider */ 1399 for (i = 0; i < ARRAY_SIZE(post_dividers); i++) { 1400 output_freq = post_dividers[i] * vclk; 1401 if (output_freq >= c.ppll_min && output_freq <= c.ppll_max) { 1402 pll->post_divider = post_dividers[i]; 1403 break; 1404 } 1405 } 1406 1407 if (i == ARRAY_SIZE(post_dividers)) 1408 return -EINVAL; 1409 1410 /* calculate feedback divider */ 1411 n = c.ref_divider * output_freq; 1412 d = c.ref_clk; 1413 1414 pll->feedback_divider = round_div(n, d); 1415 pll->vclk = vclk; 1416 1417 DBG("post %d feedback %d vlck %d output %d ref_divider %d " 1418 "vclk_per: %d\n", pll->post_divider, 1419 pll->feedback_divider, vclk, output_freq, 1420 c.ref_divider, period_in_ps); 1421 1422 return 0; 1423 } 1424 1425 1426 static int aty128_pll_to_var(const struct aty128_pll *pll, 1427 struct fb_var_screeninfo *var) 1428 { 1429 var->pixclock = 100000000 / pll->vclk; 1430 1431 return 0; 1432 } 1433 1434 1435 static void aty128_set_fifo(const struct aty128_ddafifo *dsp, 1436 const struct aty128fb_par *par) 1437 { 1438 aty_st_le32(DDA_CONFIG, dsp->dda_config); 1439 aty_st_le32(DDA_ON_OFF, dsp->dda_on_off); 1440 } 1441 1442 1443 static int aty128_ddafifo(struct aty128_ddafifo *dsp, 1444 const struct aty128_pll *pll, 1445 u32 depth, 1446 const struct aty128fb_par *par) 1447 { 1448 const struct aty128_meminfo *m = par->mem; 1449 u32 xclk = par->constants.xclk; 1450 u32 fifo_width = par->constants.fifo_width; 1451 u32 fifo_depth = par->constants.fifo_depth; 1452 s32 x, b, p, ron, roff; 1453 u32 n, d, bpp; 1454 1455 /* round up to multiple of 8 */ 1456 bpp = (depth+7) & ~7; 1457 1458 n = xclk * fifo_width; 1459 d = pll->vclk * bpp; 1460 x = round_div(n, d); 1461 1462 ron = 4 * m->MB + 1463 3 * ((m->Trcd - 2 > 0) ? m->Trcd - 2 : 0) + 1464 2 * m->Trp + 1465 m->Twr + 1466 m->CL + 1467 m->Tr2w + 1468 x; 1469 1470 DBG("x %x\n", x); 1471 1472 b = 0; 1473 while (x) { 1474 x >>= 1; 1475 b++; 1476 } 1477 p = b + 1; 1478 1479 ron <<= (11 - p); 1480 1481 n <<= (11 - p); 1482 x = round_div(n, d); 1483 roff = x * (fifo_depth - 4); 1484 1485 if ((ron + m->Rloop) >= roff) { 1486 printk(KERN_ERR "aty128fb: Mode out of range!\n"); 1487 return -EINVAL; 1488 } 1489 1490 DBG("p: %x rloop: %x x: %x ron: %x roff: %x\n", 1491 p, m->Rloop, x, ron, roff); 1492 1493 dsp->dda_config = p << 16 | m->Rloop << 20 | x; 1494 dsp->dda_on_off = ron << 16 | roff; 1495 1496 return 0; 1497 } 1498 1499 1500 /* 1501 * This actually sets the video mode. 1502 */ 1503 static int aty128fb_set_par(struct fb_info *info) 1504 { 1505 struct aty128fb_par *par = info->par; 1506 u32 config; 1507 int err; 1508 1509 if ((err = aty128_decode_var(&info->var, par)) != 0) 1510 return err; 1511 1512 if (par->blitter_may_be_busy) 1513 wait_for_idle(par); 1514 1515 /* clear all registers that may interfere with mode setting */ 1516 aty_st_le32(OVR_CLR, 0); 1517 aty_st_le32(OVR_WID_LEFT_RIGHT, 0); 1518 aty_st_le32(OVR_WID_TOP_BOTTOM, 0); 1519 aty_st_le32(OV0_SCALE_CNTL, 0); 1520 aty_st_le32(MPP_TB_CONFIG, 0); 1521 aty_st_le32(MPP_GP_CONFIG, 0); 1522 aty_st_le32(SUBPIC_CNTL, 0); 1523 aty_st_le32(VIPH_CONTROL, 0); 1524 aty_st_le32(I2C_CNTL_1, 0); /* turn off i2c */ 1525 aty_st_le32(GEN_INT_CNTL, 0); /* turn off interrupts */ 1526 aty_st_le32(CAP0_TRIG_CNTL, 0); 1527 aty_st_le32(CAP1_TRIG_CNTL, 0); 1528 1529 aty_st_8(CRTC_EXT_CNTL + 1, 4); /* turn video off */ 1530 1531 aty128_set_crtc(&par->crtc, par); 1532 aty128_set_pll(&par->pll, par); 1533 aty128_set_fifo(&par->fifo_reg, par); 1534 1535 config = aty_ld_le32(CNFG_CNTL) & ~3; 1536 1537 #if defined(__BIG_ENDIAN) 1538 if (par->crtc.bpp == 32) 1539 config |= 2; /* make aperture do 32 bit swapping */ 1540 else if (par->crtc.bpp == 16) 1541 config |= 1; /* make aperture do 16 bit swapping */ 1542 #endif 1543 1544 aty_st_le32(CNFG_CNTL, config); 1545 aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */ 1546 1547 info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3; 1548 info->fix.visual = par->crtc.bpp == 8 ? FB_VISUAL_PSEUDOCOLOR 1549 : FB_VISUAL_DIRECTCOLOR; 1550 1551 if (par->chip_gen == rage_M3) { 1552 aty128_set_crt_enable(par, par->crt_on); 1553 aty128_set_lcd_enable(par, par->lcd_on); 1554 } 1555 if (par->accel_flags & FB_ACCELF_TEXT) 1556 aty128_init_engine(par); 1557 1558 #ifdef CONFIG_BOOTX_TEXT 1559 btext_update_display(info->fix.smem_start, 1560 (((par->crtc.h_total>>16) & 0xff)+1)*8, 1561 ((par->crtc.v_total>>16) & 0x7ff)+1, 1562 par->crtc.bpp, 1563 par->crtc.vxres*par->crtc.bpp/8); 1564 #endif /* CONFIG_BOOTX_TEXT */ 1565 1566 return 0; 1567 } 1568 1569 /* 1570 * encode/decode the User Defined Part of the Display 1571 */ 1572 1573 static int aty128_decode_var(struct fb_var_screeninfo *var, 1574 struct aty128fb_par *par) 1575 { 1576 int err; 1577 struct aty128_crtc crtc; 1578 struct aty128_pll pll; 1579 struct aty128_ddafifo fifo_reg; 1580 1581 if ((err = aty128_var_to_crtc(var, &crtc, par))) 1582 return err; 1583 1584 if ((err = aty128_var_to_pll(var->pixclock, &pll, par))) 1585 return err; 1586 1587 if ((err = aty128_ddafifo(&fifo_reg, &pll, crtc.depth, par))) 1588 return err; 1589 1590 par->crtc = crtc; 1591 par->pll = pll; 1592 par->fifo_reg = fifo_reg; 1593 par->accel_flags = var->accel_flags; 1594 1595 return 0; 1596 } 1597 1598 1599 static int aty128_encode_var(struct fb_var_screeninfo *var, 1600 const struct aty128fb_par *par) 1601 { 1602 int err; 1603 1604 if ((err = aty128_crtc_to_var(&par->crtc, var))) 1605 return err; 1606 1607 if ((err = aty128_pll_to_var(&par->pll, var))) 1608 return err; 1609 1610 var->nonstd = 0; 1611 var->activate = 0; 1612 1613 var->height = -1; 1614 var->width = -1; 1615 var->accel_flags = par->accel_flags; 1616 1617 return 0; 1618 } 1619 1620 1621 static int aty128fb_check_var(struct fb_var_screeninfo *var, 1622 struct fb_info *info) 1623 { 1624 struct aty128fb_par par; 1625 int err; 1626 1627 par = *(struct aty128fb_par *)info->par; 1628 if ((err = aty128_decode_var(var, &par)) != 0) 1629 return err; 1630 aty128_encode_var(var, &par); 1631 return 0; 1632 } 1633 1634 1635 /* 1636 * Pan or Wrap the Display 1637 */ 1638 static int aty128fb_pan_display(struct fb_var_screeninfo *var, 1639 struct fb_info *fb) 1640 { 1641 struct aty128fb_par *par = fb->par; 1642 u32 xoffset, yoffset; 1643 u32 offset; 1644 u32 xres, yres; 1645 1646 xres = (((par->crtc.h_total >> 16) & 0xff) + 1) << 3; 1647 yres = ((par->crtc.v_total >> 16) & 0x7ff) + 1; 1648 1649 xoffset = (var->xoffset +7) & ~7; 1650 yoffset = var->yoffset; 1651 1652 if (xoffset+xres > par->crtc.vxres || yoffset+yres > par->crtc.vyres) 1653 return -EINVAL; 1654 1655 par->crtc.xoffset = xoffset; 1656 par->crtc.yoffset = yoffset; 1657 1658 offset = ((yoffset * par->crtc.vxres + xoffset) * (par->crtc.bpp >> 3)) 1659 & ~7; 1660 1661 if (par->crtc.bpp == 24) 1662 offset += 8 * (offset % 3); /* Must be multiple of 8 and 3 */ 1663 1664 aty_st_le32(CRTC_OFFSET, offset); 1665 1666 return 0; 1667 } 1668 1669 1670 /* 1671 * Helper function to store a single palette register 1672 */ 1673 static void aty128_st_pal(u_int regno, u_int red, u_int green, u_int blue, 1674 struct aty128fb_par *par) 1675 { 1676 if (par->chip_gen == rage_M3) { 1677 #if 0 1678 /* Note: For now, on M3, we set palette on both heads, which may 1679 * be useless. Can someone with a M3 check this ? 1680 * 1681 * This code would still be useful if using the second CRTC to 1682 * do mirroring 1683 */ 1684 1685 aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | 1686 DAC_PALETTE_ACCESS_CNTL); 1687 aty_st_8(PALETTE_INDEX, regno); 1688 aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue); 1689 #endif 1690 aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & 1691 ~DAC_PALETTE_ACCESS_CNTL); 1692 } 1693 1694 aty_st_8(PALETTE_INDEX, regno); 1695 aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue); 1696 } 1697 1698 static int aty128fb_sync(struct fb_info *info) 1699 { 1700 struct aty128fb_par *par = info->par; 1701 1702 if (par->blitter_may_be_busy) 1703 wait_for_idle(par); 1704 return 0; 1705 } 1706 1707 #ifndef MODULE 1708 static int aty128fb_setup(char *options) 1709 { 1710 char *this_opt; 1711 1712 if (!options || !*options) 1713 return 0; 1714 1715 while ((this_opt = strsep(&options, ",")) != NULL) { 1716 if (!strncmp(this_opt, "lcd:", 4)) { 1717 default_lcd_on = simple_strtoul(this_opt+4, NULL, 0); 1718 continue; 1719 } else if (!strncmp(this_opt, "crt:", 4)) { 1720 default_crt_on = simple_strtoul(this_opt+4, NULL, 0); 1721 continue; 1722 } else if (!strncmp(this_opt, "backlight:", 10)) { 1723 #ifdef CONFIG_FB_ATY128_BACKLIGHT 1724 backlight = simple_strtoul(this_opt+10, NULL, 0); 1725 #endif 1726 continue; 1727 } 1728 #ifdef CONFIG_MTRR 1729 if(!strncmp(this_opt, "nomtrr", 6)) { 1730 mtrr = 0; 1731 continue; 1732 } 1733 #endif 1734 #ifdef CONFIG_PPC_PMAC 1735 /* vmode and cmode deprecated */ 1736 if (!strncmp(this_opt, "vmode:", 6)) { 1737 unsigned int vmode = simple_strtoul(this_opt+6, NULL, 0); 1738 if (vmode > 0 && vmode <= VMODE_MAX) 1739 default_vmode = vmode; 1740 continue; 1741 } else if (!strncmp(this_opt, "cmode:", 6)) { 1742 unsigned int cmode = simple_strtoul(this_opt+6, NULL, 0); 1743 switch (cmode) { 1744 case 0: 1745 case 8: 1746 default_cmode = CMODE_8; 1747 break; 1748 case 15: 1749 case 16: 1750 default_cmode = CMODE_16; 1751 break; 1752 case 24: 1753 case 32: 1754 default_cmode = CMODE_32; 1755 break; 1756 } 1757 continue; 1758 } 1759 #endif /* CONFIG_PPC_PMAC */ 1760 mode_option = this_opt; 1761 } 1762 return 0; 1763 } 1764 #endif /* MODULE */ 1765 1766 /* Backlight */ 1767 #ifdef CONFIG_FB_ATY128_BACKLIGHT 1768 #define MAX_LEVEL 0xFF 1769 1770 static int aty128_bl_get_level_brightness(struct aty128fb_par *par, 1771 int level) 1772 { 1773 struct fb_info *info = pci_get_drvdata(par->pdev); 1774 int atylevel; 1775 1776 /* Get and convert the value */ 1777 /* No locking of bl_curve since we read a single value */ 1778 atylevel = MAX_LEVEL - 1779 (info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL); 1780 1781 if (atylevel < 0) 1782 atylevel = 0; 1783 else if (atylevel > MAX_LEVEL) 1784 atylevel = MAX_LEVEL; 1785 1786 return atylevel; 1787 } 1788 1789 /* We turn off the LCD completely instead of just dimming the backlight. 1790 * This provides greater power saving and the display is useless without 1791 * backlight anyway 1792 */ 1793 #define BACKLIGHT_LVDS_OFF 1794 /* That one prevents proper CRT output with LCD off */ 1795 #undef BACKLIGHT_DAC_OFF 1796 1797 static int aty128_bl_update_status(struct backlight_device *bd) 1798 { 1799 struct aty128fb_par *par = bl_get_data(bd); 1800 unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL); 1801 int level; 1802 1803 if (bd->props.power != FB_BLANK_UNBLANK || 1804 bd->props.fb_blank != FB_BLANK_UNBLANK || 1805 !par->lcd_on) 1806 level = 0; 1807 else 1808 level = bd->props.brightness; 1809 1810 reg |= LVDS_BL_MOD_EN | LVDS_BLON; 1811 if (level > 0) { 1812 reg |= LVDS_DIGION; 1813 if (!(reg & LVDS_ON)) { 1814 reg &= ~LVDS_BLON; 1815 aty_st_le32(LVDS_GEN_CNTL, reg); 1816 aty_ld_le32(LVDS_GEN_CNTL); 1817 mdelay(10); 1818 reg |= LVDS_BLON; 1819 aty_st_le32(LVDS_GEN_CNTL, reg); 1820 } 1821 reg &= ~LVDS_BL_MOD_LEVEL_MASK; 1822 reg |= (aty128_bl_get_level_brightness(par, level) << 1823 LVDS_BL_MOD_LEVEL_SHIFT); 1824 #ifdef BACKLIGHT_LVDS_OFF 1825 reg |= LVDS_ON | LVDS_EN; 1826 reg &= ~LVDS_DISPLAY_DIS; 1827 #endif 1828 aty_st_le32(LVDS_GEN_CNTL, reg); 1829 #ifdef BACKLIGHT_DAC_OFF 1830 aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & (~DAC_PDWN)); 1831 #endif 1832 } else { 1833 reg &= ~LVDS_BL_MOD_LEVEL_MASK; 1834 reg |= (aty128_bl_get_level_brightness(par, 0) << 1835 LVDS_BL_MOD_LEVEL_SHIFT); 1836 #ifdef BACKLIGHT_LVDS_OFF 1837 reg |= LVDS_DISPLAY_DIS; 1838 aty_st_le32(LVDS_GEN_CNTL, reg); 1839 aty_ld_le32(LVDS_GEN_CNTL); 1840 udelay(10); 1841 reg &= ~(LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION); 1842 #endif 1843 aty_st_le32(LVDS_GEN_CNTL, reg); 1844 #ifdef BACKLIGHT_DAC_OFF 1845 aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PDWN); 1846 #endif 1847 } 1848 1849 return 0; 1850 } 1851 1852 static const struct backlight_ops aty128_bl_data = { 1853 .update_status = aty128_bl_update_status, 1854 }; 1855 1856 static void aty128_bl_set_power(struct fb_info *info, int power) 1857 { 1858 if (info->bl_dev) { 1859 info->bl_dev->props.power = power; 1860 backlight_update_status(info->bl_dev); 1861 } 1862 } 1863 1864 static void aty128_bl_init(struct aty128fb_par *par) 1865 { 1866 struct backlight_properties props; 1867 struct fb_info *info = pci_get_drvdata(par->pdev); 1868 struct backlight_device *bd; 1869 char name[12]; 1870 1871 /* Could be extended to Rage128Pro LVDS output too */ 1872 if (par->chip_gen != rage_M3) 1873 return; 1874 1875 #ifdef CONFIG_PMAC_BACKLIGHT 1876 if (!pmac_has_backlight_type("ati")) 1877 return; 1878 #endif 1879 1880 snprintf(name, sizeof(name), "aty128bl%d", info->node); 1881 1882 memset(&props, 0, sizeof(struct backlight_properties)); 1883 props.type = BACKLIGHT_RAW; 1884 props.max_brightness = FB_BACKLIGHT_LEVELS - 1; 1885 bd = backlight_device_register(name, info->dev, par, &aty128_bl_data, 1886 &props); 1887 if (IS_ERR(bd)) { 1888 info->bl_dev = NULL; 1889 printk(KERN_WARNING "aty128: Backlight registration failed\n"); 1890 goto error; 1891 } 1892 1893 info->bl_dev = bd; 1894 fb_bl_default_curve(info, 0, 1895 63 * FB_BACKLIGHT_MAX / MAX_LEVEL, 1896 219 * FB_BACKLIGHT_MAX / MAX_LEVEL); 1897 1898 bd->props.brightness = bd->props.max_brightness; 1899 bd->props.power = FB_BLANK_UNBLANK; 1900 backlight_update_status(bd); 1901 1902 printk("aty128: Backlight initialized (%s)\n", name); 1903 1904 return; 1905 1906 error: 1907 return; 1908 } 1909 1910 static void aty128_bl_exit(struct backlight_device *bd) 1911 { 1912 backlight_device_unregister(bd); 1913 printk("aty128: Backlight unloaded\n"); 1914 } 1915 #endif /* CONFIG_FB_ATY128_BACKLIGHT */ 1916 1917 /* 1918 * Initialisation 1919 */ 1920 1921 #ifdef CONFIG_PPC_PMAC__disabled 1922 static void aty128_early_resume(void *data) 1923 { 1924 struct aty128fb_par *par = data; 1925 1926 if (!console_trylock()) 1927 return; 1928 pci_restore_state(par->pdev); 1929 aty128_do_resume(par->pdev); 1930 console_unlock(); 1931 } 1932 #endif /* CONFIG_PPC_PMAC */ 1933 1934 static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent) 1935 { 1936 struct fb_info *info = pci_get_drvdata(pdev); 1937 struct aty128fb_par *par = info->par; 1938 struct fb_var_screeninfo var; 1939 char video_card[50]; 1940 u8 chip_rev; 1941 u32 dac; 1942 1943 /* Get the chip revision */ 1944 chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F; 1945 1946 strcpy(video_card, "Rage128 XX "); 1947 video_card[8] = ent->device >> 8; 1948 video_card[9] = ent->device & 0xFF; 1949 1950 /* range check to make sure */ 1951 if (ent->driver_data < ARRAY_SIZE(r128_family)) 1952 strlcat(video_card, r128_family[ent->driver_data], 1953 sizeof(video_card)); 1954 1955 printk(KERN_INFO "aty128fb: %s [chip rev 0x%x] ", video_card, chip_rev); 1956 1957 if (par->vram_size % (1024 * 1024) == 0) 1958 printk("%dM %s\n", par->vram_size / (1024*1024), par->mem->name); 1959 else 1960 printk("%dk %s\n", par->vram_size / 1024, par->mem->name); 1961 1962 par->chip_gen = ent->driver_data; 1963 1964 /* fill in info */ 1965 info->fbops = &aty128fb_ops; 1966 info->flags = FBINFO_FLAG_DEFAULT; 1967 1968 par->lcd_on = default_lcd_on; 1969 par->crt_on = default_crt_on; 1970 1971 var = default_var; 1972 #ifdef CONFIG_PPC_PMAC 1973 if (machine_is(powermac)) { 1974 /* Indicate sleep capability */ 1975 if (par->chip_gen == rage_M3) { 1976 pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1); 1977 #if 0 /* Disable the early video resume hack for now as it's causing problems, 1978 * among others we now rely on the PCI core restoring the config space 1979 * for us, which isn't the case with that hack, and that code path causes 1980 * various things to be called with interrupts off while they shouldn't. 1981 * I'm leaving the code in as it can be useful for debugging purposes 1982 */ 1983 pmac_set_early_video_resume(aty128_early_resume, par); 1984 #endif 1985 } 1986 1987 /* Find default mode */ 1988 if (mode_option) { 1989 if (!mac_find_mode(&var, info, mode_option, 8)) 1990 var = default_var; 1991 } else { 1992 if (default_vmode <= 0 || default_vmode > VMODE_MAX) 1993 default_vmode = VMODE_1024_768_60; 1994 1995 /* iMacs need that resolution 1996 * PowerMac2,1 first r128 iMacs 1997 * PowerMac2,2 summer 2000 iMacs 1998 * PowerMac4,1 january 2001 iMacs "flower power" 1999 */ 2000 if (of_machine_is_compatible("PowerMac2,1") || 2001 of_machine_is_compatible("PowerMac2,2") || 2002 of_machine_is_compatible("PowerMac4,1")) 2003 default_vmode = VMODE_1024_768_75; 2004 2005 /* iBook SE */ 2006 if (of_machine_is_compatible("PowerBook2,2")) 2007 default_vmode = VMODE_800_600_60; 2008 2009 /* PowerBook Firewire (Pismo), iBook Dual USB */ 2010 if (of_machine_is_compatible("PowerBook3,1") || 2011 of_machine_is_compatible("PowerBook4,1")) 2012 default_vmode = VMODE_1024_768_60; 2013 2014 /* PowerBook Titanium */ 2015 if (of_machine_is_compatible("PowerBook3,2")) 2016 default_vmode = VMODE_1152_768_60; 2017 2018 if (default_cmode > 16) 2019 default_cmode = CMODE_32; 2020 else if (default_cmode > 8) 2021 default_cmode = CMODE_16; 2022 else 2023 default_cmode = CMODE_8; 2024 2025 if (mac_vmode_to_var(default_vmode, default_cmode, &var)) 2026 var = default_var; 2027 } 2028 } else 2029 #endif /* CONFIG_PPC_PMAC */ 2030 { 2031 if (mode_option) 2032 if (fb_find_mode(&var, info, mode_option, NULL, 2033 0, &defaultmode, 8) == 0) 2034 var = default_var; 2035 } 2036 2037 var.accel_flags &= ~FB_ACCELF_TEXT; 2038 // var.accel_flags |= FB_ACCELF_TEXT;/* FIXME Will add accel later */ 2039 2040 if (aty128fb_check_var(&var, info)) { 2041 printk(KERN_ERR "aty128fb: Cannot set default mode.\n"); 2042 return 0; 2043 } 2044 2045 /* setup the DAC the way we like it */ 2046 dac = aty_ld_le32(DAC_CNTL); 2047 dac |= (DAC_8BIT_EN | DAC_RANGE_CNTL); 2048 dac |= DAC_MASK; 2049 if (par->chip_gen == rage_M3) 2050 dac |= DAC_PALETTE2_SNOOP_EN; 2051 aty_st_le32(DAC_CNTL, dac); 2052 2053 /* turn off bus mastering, just in case */ 2054 aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL) | BUS_MASTER_DIS); 2055 2056 info->var = var; 2057 fb_alloc_cmap(&info->cmap, 256, 0); 2058 2059 var.activate = FB_ACTIVATE_NOW; 2060 2061 aty128_init_engine(par); 2062 2063 par->pdev = pdev; 2064 par->asleep = 0; 2065 par->lock_blank = 0; 2066 2067 #ifdef CONFIG_FB_ATY128_BACKLIGHT 2068 if (backlight) 2069 aty128_bl_init(par); 2070 #endif 2071 2072 if (register_framebuffer(info) < 0) 2073 return 0; 2074 2075 fb_info(info, "%s frame buffer device on %s\n", 2076 info->fix.id, video_card); 2077 2078 return 1; /* success! */ 2079 } 2080 2081 #ifdef CONFIG_PCI 2082 /* register a card ++ajoshi */ 2083 static int aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 2084 { 2085 unsigned long fb_addr, reg_addr; 2086 struct aty128fb_par *par; 2087 struct fb_info *info; 2088 int err; 2089 #ifndef __sparc__ 2090 void __iomem *bios = NULL; 2091 #endif 2092 2093 /* Enable device in PCI config */ 2094 if ((err = pci_enable_device(pdev))) { 2095 printk(KERN_ERR "aty128fb: Cannot enable PCI device: %d\n", 2096 err); 2097 return -ENODEV; 2098 } 2099 2100 fb_addr = pci_resource_start(pdev, 0); 2101 if (!request_mem_region(fb_addr, pci_resource_len(pdev, 0), 2102 "aty128fb FB")) { 2103 printk(KERN_ERR "aty128fb: cannot reserve frame " 2104 "buffer memory\n"); 2105 return -ENODEV; 2106 } 2107 2108 reg_addr = pci_resource_start(pdev, 2); 2109 if (!request_mem_region(reg_addr, pci_resource_len(pdev, 2), 2110 "aty128fb MMIO")) { 2111 printk(KERN_ERR "aty128fb: cannot reserve MMIO region\n"); 2112 goto err_free_fb; 2113 } 2114 2115 /* We have the resources. Now virtualize them */ 2116 info = framebuffer_alloc(sizeof(struct aty128fb_par), &pdev->dev); 2117 if (info == NULL) { 2118 printk(KERN_ERR "aty128fb: can't alloc fb_info_aty128\n"); 2119 goto err_free_mmio; 2120 } 2121 par = info->par; 2122 2123 info->pseudo_palette = par->pseudo_palette; 2124 2125 /* Virtualize mmio region */ 2126 info->fix.mmio_start = reg_addr; 2127 par->regbase = pci_ioremap_bar(pdev, 2); 2128 if (!par->regbase) 2129 goto err_free_info; 2130 2131 /* Grab memory size from the card */ 2132 // How does this relate to the resource length from the PCI hardware? 2133 par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF; 2134 2135 /* Virtualize the framebuffer */ 2136 info->screen_base = ioremap(fb_addr, par->vram_size); 2137 if (!info->screen_base) 2138 goto err_unmap_out; 2139 2140 /* Set up info->fix */ 2141 info->fix = aty128fb_fix; 2142 info->fix.smem_start = fb_addr; 2143 info->fix.smem_len = par->vram_size; 2144 info->fix.mmio_start = reg_addr; 2145 2146 /* If we can't test scratch registers, something is seriously wrong */ 2147 if (!register_test(par)) { 2148 printk(KERN_ERR "aty128fb: Can't write to video register!\n"); 2149 goto err_out; 2150 } 2151 2152 #ifndef __sparc__ 2153 bios = aty128_map_ROM(par, pdev); 2154 #ifdef CONFIG_X86 2155 if (bios == NULL) 2156 bios = aty128_find_mem_vbios(par); 2157 #endif 2158 if (bios == NULL) 2159 printk(KERN_INFO "aty128fb: BIOS not located, guessing timings.\n"); 2160 else { 2161 printk(KERN_INFO "aty128fb: Rage128 BIOS located\n"); 2162 aty128_get_pllinfo(par, bios); 2163 pci_unmap_rom(pdev, bios); 2164 } 2165 #endif /* __sparc__ */ 2166 2167 aty128_timings(par); 2168 pci_set_drvdata(pdev, info); 2169 2170 if (!aty128_init(pdev, ent)) 2171 goto err_out; 2172 2173 #ifdef CONFIG_MTRR 2174 if (mtrr) { 2175 par->mtrr.vram = mtrr_add(info->fix.smem_start, 2176 par->vram_size, MTRR_TYPE_WRCOMB, 1); 2177 par->mtrr.vram_valid = 1; 2178 /* let there be speed */ 2179 printk(KERN_INFO "aty128fb: Rage128 MTRR set to ON\n"); 2180 } 2181 #endif /* CONFIG_MTRR */ 2182 return 0; 2183 2184 err_out: 2185 iounmap(info->screen_base); 2186 err_unmap_out: 2187 iounmap(par->regbase); 2188 err_free_info: 2189 framebuffer_release(info); 2190 err_free_mmio: 2191 release_mem_region(pci_resource_start(pdev, 2), 2192 pci_resource_len(pdev, 2)); 2193 err_free_fb: 2194 release_mem_region(pci_resource_start(pdev, 0), 2195 pci_resource_len(pdev, 0)); 2196 return -ENODEV; 2197 } 2198 2199 static void aty128_remove(struct pci_dev *pdev) 2200 { 2201 struct fb_info *info = pci_get_drvdata(pdev); 2202 struct aty128fb_par *par; 2203 2204 if (!info) 2205 return; 2206 2207 par = info->par; 2208 2209 unregister_framebuffer(info); 2210 2211 #ifdef CONFIG_FB_ATY128_BACKLIGHT 2212 aty128_bl_exit(info->bl_dev); 2213 #endif 2214 2215 #ifdef CONFIG_MTRR 2216 if (par->mtrr.vram_valid) 2217 mtrr_del(par->mtrr.vram, info->fix.smem_start, 2218 par->vram_size); 2219 #endif /* CONFIG_MTRR */ 2220 iounmap(par->regbase); 2221 iounmap(info->screen_base); 2222 2223 release_mem_region(pci_resource_start(pdev, 0), 2224 pci_resource_len(pdev, 0)); 2225 release_mem_region(pci_resource_start(pdev, 2), 2226 pci_resource_len(pdev, 2)); 2227 framebuffer_release(info); 2228 } 2229 #endif /* CONFIG_PCI */ 2230 2231 2232 2233 /* 2234 * Blank the display. 2235 */ 2236 static int aty128fb_blank(int blank, struct fb_info *fb) 2237 { 2238 struct aty128fb_par *par = fb->par; 2239 u8 state; 2240 2241 if (par->lock_blank || par->asleep) 2242 return 0; 2243 2244 switch (blank) { 2245 case FB_BLANK_NORMAL: 2246 state = 4; 2247 break; 2248 case FB_BLANK_VSYNC_SUSPEND: 2249 state = 6; 2250 break; 2251 case FB_BLANK_HSYNC_SUSPEND: 2252 state = 5; 2253 break; 2254 case FB_BLANK_POWERDOWN: 2255 state = 7; 2256 break; 2257 case FB_BLANK_UNBLANK: 2258 default: 2259 state = 0; 2260 break; 2261 } 2262 aty_st_8(CRTC_EXT_CNTL+1, state); 2263 2264 if (par->chip_gen == rage_M3) { 2265 aty128_set_crt_enable(par, par->crt_on && !blank); 2266 aty128_set_lcd_enable(par, par->lcd_on && !blank); 2267 } 2268 2269 return 0; 2270 } 2271 2272 /* 2273 * Set a single color register. The values supplied are already 2274 * rounded down to the hardware's capabilities (according to the 2275 * entries in the var structure). Return != 0 for invalid regno. 2276 */ 2277 static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 2278 u_int transp, struct fb_info *info) 2279 { 2280 struct aty128fb_par *par = info->par; 2281 2282 if (regno > 255 2283 || (par->crtc.depth == 16 && regno > 63) 2284 || (par->crtc.depth == 15 && regno > 31)) 2285 return 1; 2286 2287 red >>= 8; 2288 green >>= 8; 2289 blue >>= 8; 2290 2291 if (regno < 16) { 2292 int i; 2293 u32 *pal = info->pseudo_palette; 2294 2295 switch (par->crtc.depth) { 2296 case 15: 2297 pal[regno] = (regno << 10) | (regno << 5) | regno; 2298 break; 2299 case 16: 2300 pal[regno] = (regno << 11) | (regno << 6) | regno; 2301 break; 2302 case 24: 2303 pal[regno] = (regno << 16) | (regno << 8) | regno; 2304 break; 2305 case 32: 2306 i = (regno << 8) | regno; 2307 pal[regno] = (i << 16) | i; 2308 break; 2309 } 2310 } 2311 2312 if (par->crtc.depth == 16 && regno > 0) { 2313 /* 2314 * With the 5-6-5 split of bits for RGB at 16 bits/pixel, we 2315 * have 32 slots for R and B values but 64 slots for G values. 2316 * Thus the R and B values go in one slot but the G value 2317 * goes in a different slot, and we have to avoid disturbing 2318 * the other fields in the slots we touch. 2319 */ 2320 par->green[regno] = green; 2321 if (regno < 32) { 2322 par->red[regno] = red; 2323 par->blue[regno] = blue; 2324 aty128_st_pal(regno * 8, red, par->green[regno*2], 2325 blue, par); 2326 } 2327 red = par->red[regno/2]; 2328 blue = par->blue[regno/2]; 2329 regno <<= 2; 2330 } else if (par->crtc.bpp == 16) 2331 regno <<= 3; 2332 aty128_st_pal(regno, red, green, blue, par); 2333 2334 return 0; 2335 } 2336 2337 #define ATY_MIRROR_LCD_ON 0x00000001 2338 #define ATY_MIRROR_CRT_ON 0x00000002 2339 2340 /* out param: u32* backlight value: 0 to 15 */ 2341 #define FBIO_ATY128_GET_MIRROR _IOR('@', 1, __u32) 2342 /* in param: u32* backlight value: 0 to 15 */ 2343 #define FBIO_ATY128_SET_MIRROR _IOW('@', 2, __u32) 2344 2345 static int aty128fb_ioctl(struct fb_info *info, u_int cmd, u_long arg) 2346 { 2347 struct aty128fb_par *par = info->par; 2348 u32 value; 2349 int rc; 2350 2351 switch (cmd) { 2352 case FBIO_ATY128_SET_MIRROR: 2353 if (par->chip_gen != rage_M3) 2354 return -EINVAL; 2355 rc = get_user(value, (__u32 __user *)arg); 2356 if (rc) 2357 return rc; 2358 par->lcd_on = (value & 0x01) != 0; 2359 par->crt_on = (value & 0x02) != 0; 2360 if (!par->crt_on && !par->lcd_on) 2361 par->lcd_on = 1; 2362 aty128_set_crt_enable(par, par->crt_on); 2363 aty128_set_lcd_enable(par, par->lcd_on); 2364 return 0; 2365 case FBIO_ATY128_GET_MIRROR: 2366 if (par->chip_gen != rage_M3) 2367 return -EINVAL; 2368 value = (par->crt_on << 1) | par->lcd_on; 2369 return put_user(value, (__u32 __user *)arg); 2370 } 2371 return -EINVAL; 2372 } 2373 2374 #if 0 2375 /* 2376 * Accelerated functions 2377 */ 2378 2379 static inline void aty128_rectcopy(int srcx, int srcy, int dstx, int dsty, 2380 u_int width, u_int height, 2381 struct fb_info_aty128 *par) 2382 { 2383 u32 save_dp_datatype, save_dp_cntl, dstval; 2384 2385 if (!width || !height) 2386 return; 2387 2388 dstval = depth_to_dst(par->current_par.crtc.depth); 2389 if (dstval == DST_24BPP) { 2390 srcx *= 3; 2391 dstx *= 3; 2392 width *= 3; 2393 } else if (dstval == -EINVAL) { 2394 printk("aty128fb: invalid depth or RGBA\n"); 2395 return; 2396 } 2397 2398 wait_for_fifo(2, par); 2399 save_dp_datatype = aty_ld_le32(DP_DATATYPE); 2400 save_dp_cntl = aty_ld_le32(DP_CNTL); 2401 2402 wait_for_fifo(6, par); 2403 aty_st_le32(SRC_Y_X, (srcy << 16) | srcx); 2404 aty_st_le32(DP_MIX, ROP3_SRCCOPY | DP_SRC_RECT); 2405 aty_st_le32(DP_CNTL, DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM); 2406 aty_st_le32(DP_DATATYPE, save_dp_datatype | dstval | SRC_DSTCOLOR); 2407 2408 aty_st_le32(DST_Y_X, (dsty << 16) | dstx); 2409 aty_st_le32(DST_HEIGHT_WIDTH, (height << 16) | width); 2410 2411 par->blitter_may_be_busy = 1; 2412 2413 wait_for_fifo(2, par); 2414 aty_st_le32(DP_DATATYPE, save_dp_datatype); 2415 aty_st_le32(DP_CNTL, save_dp_cntl); 2416 } 2417 2418 2419 /* 2420 * Text mode accelerated functions 2421 */ 2422 2423 static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, 2424 int dx, int height, int width) 2425 { 2426 sx *= fontwidth(p); 2427 sy *= fontheight(p); 2428 dx *= fontwidth(p); 2429 dy *= fontheight(p); 2430 width *= fontwidth(p); 2431 height *= fontheight(p); 2432 2433 aty128_rectcopy(sx, sy, dx, dy, width, height, 2434 (struct fb_info_aty128 *)p->fb_info); 2435 } 2436 #endif /* 0 */ 2437 2438 static void aty128_set_suspend(struct aty128fb_par *par, int suspend) 2439 { 2440 u32 pmgt; 2441 struct pci_dev *pdev = par->pdev; 2442 2443 if (!par->pdev->pm_cap) 2444 return; 2445 2446 /* Set the chip into the appropriate suspend mode (we use D2, 2447 * D3 would require a complete re-initialisation of the chip, 2448 * including PCI config registers, clocks, AGP configuration, ...) 2449 * 2450 * For resume, the core will have already brought us back to D0 2451 */ 2452 if (suspend) { 2453 /* Make sure CRTC2 is reset. Remove that the day we decide to 2454 * actually use CRTC2 and replace it with real code for disabling 2455 * the CRTC2 output during sleep 2456 */ 2457 aty_st_le32(CRTC2_GEN_CNTL, aty_ld_le32(CRTC2_GEN_CNTL) & 2458 ~(CRTC2_EN)); 2459 2460 /* Set the power management mode to be PCI based */ 2461 /* Use this magic value for now */ 2462 pmgt = 0x0c005407; 2463 aty_st_pll(POWER_MANAGEMENT, pmgt); 2464 (void)aty_ld_pll(POWER_MANAGEMENT); 2465 aty_st_le32(BUS_CNTL1, 0x00000010); 2466 aty_st_le32(MEM_POWER_MISC, 0x0c830000); 2467 mdelay(100); 2468 2469 /* Switch PCI power management to D2 */ 2470 pci_set_power_state(pdev, PCI_D2); 2471 } 2472 } 2473 2474 static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state) 2475 { 2476 struct fb_info *info = pci_get_drvdata(pdev); 2477 struct aty128fb_par *par = info->par; 2478 2479 /* Because we may change PCI D state ourselves, we need to 2480 * first save the config space content so the core can 2481 * restore it properly on resume. 2482 */ 2483 pci_save_state(pdev); 2484 2485 /* We don't do anything but D2, for now we return 0, but 2486 * we may want to change that. How do we know if the BIOS 2487 * can properly take care of D3 ? Also, with swsusp, we 2488 * know we'll be rebooted, ... 2489 */ 2490 #ifndef CONFIG_PPC_PMAC 2491 /* HACK ALERT ! Once I find a proper way to say to each driver 2492 * individually what will happen with it's PCI slot, I'll change 2493 * that. On laptops, the AGP slot is just unclocked, so D2 is 2494 * expected, while on desktops, the card is powered off 2495 */ 2496 return 0; 2497 #endif /* CONFIG_PPC_PMAC */ 2498 2499 if (state.event == pdev->dev.power.power_state.event) 2500 return 0; 2501 2502 printk(KERN_DEBUG "aty128fb: suspending...\n"); 2503 2504 console_lock(); 2505 2506 fb_set_suspend(info, 1); 2507 2508 /* Make sure engine is reset */ 2509 wait_for_idle(par); 2510 aty128_reset_engine(par); 2511 wait_for_idle(par); 2512 2513 /* Blank display and LCD */ 2514 aty128fb_blank(FB_BLANK_POWERDOWN, info); 2515 2516 /* Sleep */ 2517 par->asleep = 1; 2518 par->lock_blank = 1; 2519 2520 #ifdef CONFIG_PPC_PMAC 2521 /* On powermac, we have hooks to properly suspend/resume AGP now, 2522 * use them here. We'll ultimately need some generic support here, 2523 * but the generic code isn't quite ready for that yet 2524 */ 2525 pmac_suspend_agp_for_card(pdev); 2526 #endif /* CONFIG_PPC_PMAC */ 2527 2528 /* We need a way to make sure the fbdev layer will _not_ touch the 2529 * framebuffer before we put the chip to suspend state. On 2.4, I 2530 * used dummy fb ops, 2.5 need proper support for this at the 2531 * fbdev level 2532 */ 2533 if (state.event != PM_EVENT_ON) 2534 aty128_set_suspend(par, 1); 2535 2536 console_unlock(); 2537 2538 pdev->dev.power.power_state = state; 2539 2540 return 0; 2541 } 2542 2543 static int aty128_do_resume(struct pci_dev *pdev) 2544 { 2545 struct fb_info *info = pci_get_drvdata(pdev); 2546 struct aty128fb_par *par = info->par; 2547 2548 if (pdev->dev.power.power_state.event == PM_EVENT_ON) 2549 return 0; 2550 2551 /* PCI state will have been restored by the core, so 2552 * we should be in D0 now with our config space fully 2553 * restored 2554 */ 2555 2556 /* Wakeup chip */ 2557 aty128_set_suspend(par, 0); 2558 par->asleep = 0; 2559 2560 /* Restore display & engine */ 2561 aty128_reset_engine(par); 2562 wait_for_idle(par); 2563 aty128fb_set_par(info); 2564 fb_pan_display(info, &info->var); 2565 fb_set_cmap(&info->cmap, info); 2566 2567 /* Refresh */ 2568 fb_set_suspend(info, 0); 2569 2570 /* Unblank */ 2571 par->lock_blank = 0; 2572 aty128fb_blank(0, info); 2573 2574 #ifdef CONFIG_PPC_PMAC 2575 /* On powermac, we have hooks to properly suspend/resume AGP now, 2576 * use them here. We'll ultimately need some generic support here, 2577 * but the generic code isn't quite ready for that yet 2578 */ 2579 pmac_resume_agp_for_card(pdev); 2580 #endif /* CONFIG_PPC_PMAC */ 2581 2582 pdev->dev.power.power_state = PMSG_ON; 2583 2584 printk(KERN_DEBUG "aty128fb: resumed !\n"); 2585 2586 return 0; 2587 } 2588 2589 static int aty128_pci_resume(struct pci_dev *pdev) 2590 { 2591 int rc; 2592 2593 console_lock(); 2594 rc = aty128_do_resume(pdev); 2595 console_unlock(); 2596 2597 return rc; 2598 } 2599 2600 2601 static int aty128fb_init(void) 2602 { 2603 #ifndef MODULE 2604 char *option = NULL; 2605 2606 if (fb_get_options("aty128fb", &option)) 2607 return -ENODEV; 2608 aty128fb_setup(option); 2609 #endif 2610 2611 return pci_register_driver(&aty128fb_driver); 2612 } 2613 2614 static void __exit aty128fb_exit(void) 2615 { 2616 pci_unregister_driver(&aty128fb_driver); 2617 } 2618 2619 module_init(aty128fb_init); 2620 2621 module_exit(aty128fb_exit); 2622 2623 MODULE_AUTHOR("(c)1999-2003 Brad Douglas <brad@neruo.com>"); 2624 MODULE_DESCRIPTION("FBDev driver for ATI Rage128 / Pro cards"); 2625 MODULE_LICENSE("GPL"); 2626 module_param(mode_option, charp, 0); 2627 MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); 2628 #ifdef CONFIG_MTRR 2629 module_param_named(nomtrr, mtrr, invbool, 0); 2630 MODULE_PARM_DESC(nomtrr, "bool: Disable MTRR support (0 or 1=disabled) (default=0)"); 2631 #endif 2632 2633