1 /* 2 * Driver for AT91 LCD Controller 3 * 4 * Copyright (C) 2007 Atmel Corporation 5 * 6 * This file is subject to the terms and conditions of the GNU General Public 7 * License. See the file COPYING in the main directory of this archive for 8 * more details. 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/platform_device.h> 13 #include <linux/dma-mapping.h> 14 #include <linux/interrupt.h> 15 #include <linux/clk.h> 16 #include <linux/fb.h> 17 #include <linux/init.h> 18 #include <linux/delay.h> 19 #include <linux/backlight.h> 20 #include <linux/gfp.h> 21 #include <linux/gpio/consumer.h> 22 #include <linux/module.h> 23 #include <linux/of.h> 24 #include <linux/of_device.h> 25 #include <video/of_videomode.h> 26 #include <video/of_display_timing.h> 27 #include <linux/regulator/consumer.h> 28 #include <video/videomode.h> 29 30 #include <video/atmel_lcdc.h> 31 32 struct atmel_lcdfb_config { 33 bool have_alt_pixclock; 34 bool have_hozval; 35 bool have_intensity_bit; 36 }; 37 38 /* LCD Controller info data structure, stored in device platform_data */ 39 struct atmel_lcdfb_info { 40 spinlock_t lock; 41 struct fb_info *info; 42 void __iomem *mmio; 43 int irq_base; 44 struct work_struct task; 45 46 unsigned int smem_len; 47 struct platform_device *pdev; 48 struct clk *bus_clk; 49 struct clk *lcdc_clk; 50 51 struct backlight_device *backlight; 52 u8 bl_power; 53 u8 saved_lcdcon; 54 55 u32 pseudo_palette[16]; 56 bool have_intensity_bit; 57 58 struct atmel_lcdfb_pdata pdata; 59 60 struct atmel_lcdfb_config *config; 61 struct regulator *reg_lcd; 62 }; 63 64 struct atmel_lcdfb_power_ctrl_gpio { 65 struct gpio_desc *gpiod; 66 67 struct list_head list; 68 }; 69 70 #define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) 71 #define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) 72 73 /* configurable parameters */ 74 #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 75 #define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */ 76 #define ATMEL_LCDC_FIFO_SIZE 512 /* words */ 77 78 static struct atmel_lcdfb_config at91sam9261_config = { 79 .have_hozval = true, 80 .have_intensity_bit = true, 81 }; 82 83 static struct atmel_lcdfb_config at91sam9263_config = { 84 .have_intensity_bit = true, 85 }; 86 87 static struct atmel_lcdfb_config at91sam9g10_config = { 88 .have_hozval = true, 89 }; 90 91 static struct atmel_lcdfb_config at91sam9g45_config = { 92 .have_alt_pixclock = true, 93 }; 94 95 static struct atmel_lcdfb_config at91sam9g45es_config = { 96 }; 97 98 static struct atmel_lcdfb_config at91sam9rl_config = { 99 .have_intensity_bit = true, 100 }; 101 102 static u32 contrast_ctr = ATMEL_LCDC_PS_DIV8 103 | ATMEL_LCDC_POL_POSITIVE 104 | ATMEL_LCDC_ENA_PWMENABLE; 105 106 #ifdef CONFIG_BACKLIGHT_ATMEL_LCDC 107 108 /* some bl->props field just changed */ 109 static int atmel_bl_update_status(struct backlight_device *bl) 110 { 111 struct atmel_lcdfb_info *sinfo = bl_get_data(bl); 112 int power = sinfo->bl_power; 113 int brightness = bl->props.brightness; 114 115 /* REVISIT there may be a meaningful difference between 116 * fb_blank and power ... there seem to be some cases 117 * this doesn't handle correctly. 118 */ 119 if (bl->props.fb_blank != sinfo->bl_power) 120 power = bl->props.fb_blank; 121 else if (bl->props.power != sinfo->bl_power) 122 power = bl->props.power; 123 124 if (brightness < 0 && power == FB_BLANK_UNBLANK) 125 brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); 126 else if (power != FB_BLANK_UNBLANK) 127 brightness = 0; 128 129 lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness); 130 if (contrast_ctr & ATMEL_LCDC_POL_POSITIVE) 131 lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 132 brightness ? contrast_ctr : 0); 133 else 134 lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr); 135 136 bl->props.fb_blank = bl->props.power = sinfo->bl_power = power; 137 138 return 0; 139 } 140 141 static int atmel_bl_get_brightness(struct backlight_device *bl) 142 { 143 struct atmel_lcdfb_info *sinfo = bl_get_data(bl); 144 145 return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); 146 } 147 148 static const struct backlight_ops atmel_lcdc_bl_ops = { 149 .update_status = atmel_bl_update_status, 150 .get_brightness = atmel_bl_get_brightness, 151 }; 152 153 static void init_backlight(struct atmel_lcdfb_info *sinfo) 154 { 155 struct backlight_properties props; 156 struct backlight_device *bl; 157 158 sinfo->bl_power = FB_BLANK_UNBLANK; 159 160 if (sinfo->backlight) 161 return; 162 163 memset(&props, 0, sizeof(struct backlight_properties)); 164 props.type = BACKLIGHT_RAW; 165 props.max_brightness = 0xff; 166 bl = backlight_device_register("backlight", &sinfo->pdev->dev, sinfo, 167 &atmel_lcdc_bl_ops, &props); 168 if (IS_ERR(bl)) { 169 dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n", 170 PTR_ERR(bl)); 171 return; 172 } 173 sinfo->backlight = bl; 174 175 bl->props.power = FB_BLANK_UNBLANK; 176 bl->props.fb_blank = FB_BLANK_UNBLANK; 177 bl->props.brightness = atmel_bl_get_brightness(bl); 178 } 179 180 static void exit_backlight(struct atmel_lcdfb_info *sinfo) 181 { 182 if (!sinfo->backlight) 183 return; 184 185 if (sinfo->backlight->ops) { 186 sinfo->backlight->props.power = FB_BLANK_POWERDOWN; 187 sinfo->backlight->ops->update_status(sinfo->backlight); 188 } 189 backlight_device_unregister(sinfo->backlight); 190 } 191 192 #else 193 194 static void init_backlight(struct atmel_lcdfb_info *sinfo) 195 { 196 dev_warn(&sinfo->pdev->dev, "backlight control is not available\n"); 197 } 198 199 static void exit_backlight(struct atmel_lcdfb_info *sinfo) 200 { 201 } 202 203 #endif 204 205 static void init_contrast(struct atmel_lcdfb_info *sinfo) 206 { 207 struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; 208 209 /* contrast pwm can be 'inverted' */ 210 if (pdata->lcdcon_pol_negative) 211 contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE); 212 213 /* have some default contrast/backlight settings */ 214 lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr); 215 lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); 216 217 if (pdata->lcdcon_is_backlight) 218 init_backlight(sinfo); 219 } 220 221 static inline void atmel_lcdfb_power_control(struct atmel_lcdfb_info *sinfo, int on) 222 { 223 int ret; 224 struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; 225 226 if (pdata->atmel_lcdfb_power_control) 227 pdata->atmel_lcdfb_power_control(pdata, on); 228 else if (sinfo->reg_lcd) { 229 if (on) { 230 ret = regulator_enable(sinfo->reg_lcd); 231 if (ret) 232 dev_err(&sinfo->pdev->dev, 233 "lcd regulator enable failed: %d\n", ret); 234 } else { 235 ret = regulator_disable(sinfo->reg_lcd); 236 if (ret) 237 dev_err(&sinfo->pdev->dev, 238 "lcd regulator disable failed: %d\n", ret); 239 } 240 } 241 } 242 243 static const struct fb_fix_screeninfo atmel_lcdfb_fix __initconst = { 244 .type = FB_TYPE_PACKED_PIXELS, 245 .visual = FB_VISUAL_TRUECOLOR, 246 .xpanstep = 0, 247 .ypanstep = 1, 248 .ywrapstep = 0, 249 .accel = FB_ACCEL_NONE, 250 }; 251 252 static unsigned long compute_hozval(struct atmel_lcdfb_info *sinfo, 253 unsigned long xres) 254 { 255 unsigned long lcdcon2; 256 unsigned long value; 257 258 if (!sinfo->config->have_hozval) 259 return xres; 260 261 lcdcon2 = lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2); 262 value = xres; 263 if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) { 264 /* STN display */ 265 if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) { 266 value *= 3; 267 } 268 if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4 269 || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8 270 && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL )) 271 value = DIV_ROUND_UP(value, 4); 272 else 273 value = DIV_ROUND_UP(value, 8); 274 } 275 276 return value; 277 } 278 279 static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo) 280 { 281 struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; 282 283 /* Turn off the LCD controller and the DMA controller */ 284 lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, 285 pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET); 286 287 /* Wait for the LCDC core to become idle */ 288 while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) 289 msleep(10); 290 291 lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); 292 } 293 294 static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo) 295 { 296 atmel_lcdfb_stop_nowait(sinfo); 297 298 /* Wait for DMA engine to become idle... */ 299 while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) 300 msleep(10); 301 } 302 303 static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo) 304 { 305 struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; 306 307 lcdc_writel(sinfo, ATMEL_LCDC_DMACON, pdata->default_dmacon); 308 lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, 309 (pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET) 310 | ATMEL_LCDC_PWR); 311 } 312 313 static void atmel_lcdfb_update_dma(struct fb_info *info, 314 struct fb_var_screeninfo *var) 315 { 316 struct atmel_lcdfb_info *sinfo = info->par; 317 struct fb_fix_screeninfo *fix = &info->fix; 318 unsigned long dma_addr; 319 320 dma_addr = (fix->smem_start + var->yoffset * fix->line_length 321 + var->xoffset * info->var.bits_per_pixel / 8); 322 323 dma_addr &= ~3UL; 324 325 /* Set framebuffer DMA base address and pixel offset */ 326 lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr); 327 } 328 329 static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo) 330 { 331 struct fb_info *info = sinfo->info; 332 333 dma_free_wc(info->device, info->fix.smem_len, info->screen_base, 334 info->fix.smem_start); 335 } 336 337 /** 338 * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory 339 * @sinfo: the frame buffer to allocate memory for 340 * 341 * This function is called only from the atmel_lcdfb_probe() 342 * so no locking by fb_info->mm_lock around smem_len setting is needed. 343 */ 344 static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo) 345 { 346 struct fb_info *info = sinfo->info; 347 struct fb_var_screeninfo *var = &info->var; 348 unsigned int smem_len; 349 350 smem_len = (var->xres_virtual * var->yres_virtual 351 * ((var->bits_per_pixel + 7) / 8)); 352 info->fix.smem_len = max(smem_len, sinfo->smem_len); 353 354 info->screen_base = dma_alloc_wc(info->device, info->fix.smem_len, 355 (dma_addr_t *)&info->fix.smem_start, 356 GFP_KERNEL); 357 358 if (!info->screen_base) { 359 return -ENOMEM; 360 } 361 362 memset(info->screen_base, 0, info->fix.smem_len); 363 364 return 0; 365 } 366 367 static const struct fb_videomode *atmel_lcdfb_choose_mode(struct fb_var_screeninfo *var, 368 struct fb_info *info) 369 { 370 struct fb_videomode varfbmode; 371 const struct fb_videomode *fbmode = NULL; 372 373 fb_var_to_videomode(&varfbmode, var); 374 fbmode = fb_find_nearest_mode(&varfbmode, &info->modelist); 375 if (fbmode) 376 fb_videomode_to_var(var, fbmode); 377 return fbmode; 378 } 379 380 381 /** 382 * atmel_lcdfb_check_var - Validates a var passed in. 383 * @var: frame buffer variable screen structure 384 * @info: frame buffer structure that represents a single frame buffer 385 * 386 * Checks to see if the hardware supports the state requested by 387 * var passed in. This function does not alter the hardware 388 * state!!! This means the data stored in struct fb_info and 389 * struct atmel_lcdfb_info do not change. This includes the var 390 * inside of struct fb_info. Do NOT change these. This function 391 * can be called on its own if we intent to only test a mode and 392 * not actually set it. The stuff in modedb.c is a example of 393 * this. If the var passed in is slightly off by what the 394 * hardware can support then we alter the var PASSED in to what 395 * we can do. If the hardware doesn't support mode change a 396 * -EINVAL will be returned by the upper layers. You don't need 397 * to implement this function then. If you hardware doesn't 398 * support changing the resolution then this function is not 399 * needed. In this case the driver would just provide a var that 400 * represents the static state the screen is in. 401 * 402 * Returns negative errno on error, or zero on success. 403 */ 404 static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, 405 struct fb_info *info) 406 { 407 struct device *dev = info->device; 408 struct atmel_lcdfb_info *sinfo = info->par; 409 struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; 410 unsigned long clk_value_khz; 411 412 clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; 413 414 dev_dbg(dev, "%s:\n", __func__); 415 416 if (!(var->pixclock && var->bits_per_pixel)) { 417 /* choose a suitable mode if possible */ 418 if (!atmel_lcdfb_choose_mode(var, info)) { 419 dev_err(dev, "needed value not specified\n"); 420 return -EINVAL; 421 } 422 } 423 424 dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres); 425 dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock)); 426 dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel); 427 dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz); 428 429 if (PICOS2KHZ(var->pixclock) > clk_value_khz) { 430 dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock)); 431 return -EINVAL; 432 } 433 434 /* Do not allow to have real resoulution larger than virtual */ 435 if (var->xres > var->xres_virtual) 436 var->xres_virtual = var->xres; 437 438 if (var->yres > var->yres_virtual) 439 var->yres_virtual = var->yres; 440 441 /* Force same alignment for each line */ 442 var->xres = (var->xres + 3) & ~3UL; 443 var->xres_virtual = (var->xres_virtual + 3) & ~3UL; 444 445 var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0; 446 var->transp.msb_right = 0; 447 var->transp.offset = var->transp.length = 0; 448 var->xoffset = var->yoffset = 0; 449 450 if (info->fix.smem_len) { 451 unsigned int smem_len = (var->xres_virtual * var->yres_virtual 452 * ((var->bits_per_pixel + 7) / 8)); 453 if (smem_len > info->fix.smem_len) { 454 dev_err(dev, "Frame buffer is too small (%u) for screen size (need at least %u)\n", 455 info->fix.smem_len, smem_len); 456 return -EINVAL; 457 } 458 } 459 460 /* Saturate vertical and horizontal timings at maximum values */ 461 var->vsync_len = min_t(u32, var->vsync_len, 462 (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1); 463 var->upper_margin = min_t(u32, var->upper_margin, 464 ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET); 465 var->lower_margin = min_t(u32, var->lower_margin, 466 ATMEL_LCDC_VFP); 467 var->right_margin = min_t(u32, var->right_margin, 468 (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1); 469 var->hsync_len = min_t(u32, var->hsync_len, 470 (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1); 471 var->left_margin = min_t(u32, var->left_margin, 472 ATMEL_LCDC_HBP + 1); 473 474 /* Some parameters can't be zero */ 475 var->vsync_len = max_t(u32, var->vsync_len, 1); 476 var->right_margin = max_t(u32, var->right_margin, 1); 477 var->hsync_len = max_t(u32, var->hsync_len, 1); 478 var->left_margin = max_t(u32, var->left_margin, 1); 479 480 switch (var->bits_per_pixel) { 481 case 1: 482 case 2: 483 case 4: 484 case 8: 485 var->red.offset = var->green.offset = var->blue.offset = 0; 486 var->red.length = var->green.length = var->blue.length 487 = var->bits_per_pixel; 488 break; 489 case 16: 490 /* Older SOCs use IBGR:555 rather than BGR:565. */ 491 if (sinfo->config->have_intensity_bit) 492 var->green.length = 5; 493 else 494 var->green.length = 6; 495 496 if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) { 497 /* RGB:5X5 mode */ 498 var->red.offset = var->green.length + 5; 499 var->blue.offset = 0; 500 } else { 501 /* BGR:5X5 mode */ 502 var->red.offset = 0; 503 var->blue.offset = var->green.length + 5; 504 } 505 var->green.offset = 5; 506 var->red.length = var->blue.length = 5; 507 break; 508 case 32: 509 var->transp.offset = 24; 510 var->transp.length = 8; 511 fallthrough; 512 case 24: 513 if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) { 514 /* RGB:888 mode */ 515 var->red.offset = 16; 516 var->blue.offset = 0; 517 } else { 518 /* BGR:888 mode */ 519 var->red.offset = 0; 520 var->blue.offset = 16; 521 } 522 var->green.offset = 8; 523 var->red.length = var->green.length = var->blue.length = 8; 524 break; 525 default: 526 dev_err(dev, "color depth %d not supported\n", 527 var->bits_per_pixel); 528 return -EINVAL; 529 } 530 531 return 0; 532 } 533 534 /* 535 * LCD reset sequence 536 */ 537 static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo) 538 { 539 might_sleep(); 540 541 atmel_lcdfb_stop(sinfo); 542 atmel_lcdfb_start(sinfo); 543 } 544 545 /** 546 * atmel_lcdfb_set_par - Alters the hardware state. 547 * @info: frame buffer structure that represents a single frame buffer 548 * 549 * Using the fb_var_screeninfo in fb_info we set the resolution 550 * of the this particular framebuffer. This function alters the 551 * par AND the fb_fix_screeninfo stored in fb_info. It doesn't 552 * not alter var in fb_info since we are using that data. This 553 * means we depend on the data in var inside fb_info to be 554 * supported by the hardware. atmel_lcdfb_check_var is always called 555 * before atmel_lcdfb_set_par to ensure this. Again if you can't 556 * change the resolution you don't need this function. 557 * 558 */ 559 static int atmel_lcdfb_set_par(struct fb_info *info) 560 { 561 struct atmel_lcdfb_info *sinfo = info->par; 562 struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; 563 unsigned long hozval_linesz; 564 unsigned long value; 565 unsigned long clk_value_khz; 566 unsigned long bits_per_line; 567 unsigned long pix_factor = 2; 568 569 might_sleep(); 570 571 dev_dbg(info->device, "%s:\n", __func__); 572 dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n", 573 info->var.xres, info->var.yres, 574 info->var.xres_virtual, info->var.yres_virtual); 575 576 atmel_lcdfb_stop_nowait(sinfo); 577 578 if (info->var.bits_per_pixel == 1) 579 info->fix.visual = FB_VISUAL_MONO01; 580 else if (info->var.bits_per_pixel <= 8) 581 info->fix.visual = FB_VISUAL_PSEUDOCOLOR; 582 else 583 info->fix.visual = FB_VISUAL_TRUECOLOR; 584 585 bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel; 586 info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8); 587 588 /* Re-initialize the DMA engine... */ 589 dev_dbg(info->device, " * update DMA engine\n"); 590 atmel_lcdfb_update_dma(info, &info->var); 591 592 /* ...set frame size and burst length = 8 words (?) */ 593 value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32; 594 value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET); 595 lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value); 596 597 /* Now, the LCDC core... */ 598 599 /* Set pixel clock */ 600 if (sinfo->config->have_alt_pixclock) 601 pix_factor = 1; 602 603 clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; 604 605 value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock)); 606 607 if (value < pix_factor) { 608 dev_notice(info->device, "Bypassing pixel clock divider\n"); 609 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); 610 } else { 611 value = (value / pix_factor) - 1; 612 dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", 613 value); 614 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, 615 value << ATMEL_LCDC_CLKVAL_OFFSET); 616 info->var.pixclock = 617 KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1))); 618 dev_dbg(info->device, " updated pixclk: %lu KHz\n", 619 PICOS2KHZ(info->var.pixclock)); 620 } 621 622 623 /* Initialize control register 2 */ 624 value = pdata->default_lcdcon2; 625 626 if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) 627 value |= ATMEL_LCDC_INVLINE_INVERTED; 628 if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) 629 value |= ATMEL_LCDC_INVFRAME_INVERTED; 630 631 switch (info->var.bits_per_pixel) { 632 case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break; 633 case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break; 634 case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break; 635 case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break; 636 case 15: 637 case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break; 638 case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break; 639 case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break; 640 default: BUG(); break; 641 } 642 dev_dbg(info->device, " * LCDCON2 = %08lx\n", value); 643 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value); 644 645 /* Vertical timing */ 646 value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET; 647 value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET; 648 value |= info->var.lower_margin; 649 dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value); 650 lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value); 651 652 /* Horizontal timing */ 653 value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET; 654 value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET; 655 value |= (info->var.left_margin - 1); 656 dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value); 657 lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value); 658 659 /* Horizontal value (aka line size) */ 660 hozval_linesz = compute_hozval(sinfo, info->var.xres); 661 662 /* Display size */ 663 value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET; 664 value |= info->var.yres - 1; 665 dev_dbg(info->device, " * LCDFRMCFG = %08lx\n", value); 666 lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value); 667 668 /* FIFO Threshold: Use formula from data sheet */ 669 value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3); 670 lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value); 671 672 /* Toggle LCD_MODE every frame */ 673 lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0); 674 675 /* Disable all interrupts */ 676 lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0U); 677 /* Enable FIFO & DMA errors */ 678 lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI); 679 680 /* ...wait for DMA engine to become idle... */ 681 while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) 682 msleep(10); 683 684 atmel_lcdfb_start(sinfo); 685 686 dev_dbg(info->device, " * DONE\n"); 687 688 return 0; 689 } 690 691 static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf) 692 { 693 chan &= 0xffff; 694 chan >>= 16 - bf->length; 695 return chan << bf->offset; 696 } 697 698 /** 699 * atmel_lcdfb_setcolreg - Optional function. Sets a color register. 700 * @regno: Which register in the CLUT we are programming 701 * @red: The red value which can be up to 16 bits wide 702 * @green: The green value which can be up to 16 bits wide 703 * @blue: The blue value which can be up to 16 bits wide. 704 * @transp: If supported the alpha value which can be up to 16 bits wide. 705 * @info: frame buffer info structure 706 * 707 * Set a single color register. The values supplied have a 16 bit 708 * magnitude which needs to be scaled in this function for the hardware. 709 * Things to take into consideration are how many color registers, if 710 * any, are supported with the current color visual. With truecolor mode 711 * no color palettes are supported. Here a pseudo palette is created 712 * which we store the value in pseudo_palette in struct fb_info. For 713 * pseudocolor mode we have a limited color palette. To deal with this 714 * we can program what color is displayed for a particular pixel value. 715 * DirectColor is similar in that we can program each color field. If 716 * we have a static colormap we don't need to implement this function. 717 * 718 * Returns negative errno on error, or zero on success. In an 719 * ideal world, this would have been the case, but as it turns 720 * out, the other drivers return 1 on failure, so that's what 721 * we're going to do. 722 */ 723 static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red, 724 unsigned int green, unsigned int blue, 725 unsigned int transp, struct fb_info *info) 726 { 727 struct atmel_lcdfb_info *sinfo = info->par; 728 struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; 729 unsigned int val; 730 u32 *pal; 731 int ret = 1; 732 733 if (info->var.grayscale) 734 red = green = blue = (19595 * red + 38470 * green 735 + 7471 * blue) >> 16; 736 737 switch (info->fix.visual) { 738 case FB_VISUAL_TRUECOLOR: 739 if (regno < 16) { 740 pal = info->pseudo_palette; 741 742 val = chan_to_field(red, &info->var.red); 743 val |= chan_to_field(green, &info->var.green); 744 val |= chan_to_field(blue, &info->var.blue); 745 746 pal[regno] = val; 747 ret = 0; 748 } 749 break; 750 751 case FB_VISUAL_PSEUDOCOLOR: 752 if (regno < 256) { 753 if (sinfo->config->have_intensity_bit) { 754 /* old style I+BGR:555 */ 755 val = ((red >> 11) & 0x001f); 756 val |= ((green >> 6) & 0x03e0); 757 val |= ((blue >> 1) & 0x7c00); 758 759 /* 760 * TODO: intensity bit. Maybe something like 761 * ~(red[10] ^ green[10] ^ blue[10]) & 1 762 */ 763 } else { 764 /* new style BGR:565 / RGB:565 */ 765 if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) { 766 val = ((blue >> 11) & 0x001f); 767 val |= ((red >> 0) & 0xf800); 768 } else { 769 val = ((red >> 11) & 0x001f); 770 val |= ((blue >> 0) & 0xf800); 771 } 772 773 val |= ((green >> 5) & 0x07e0); 774 } 775 776 lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val); 777 ret = 0; 778 } 779 break; 780 781 case FB_VISUAL_MONO01: 782 if (regno < 2) { 783 val = (regno == 0) ? 0x00 : 0x1F; 784 lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val); 785 ret = 0; 786 } 787 break; 788 789 } 790 791 return ret; 792 } 793 794 static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var, 795 struct fb_info *info) 796 { 797 dev_dbg(info->device, "%s\n", __func__); 798 799 atmel_lcdfb_update_dma(info, var); 800 801 return 0; 802 } 803 804 static int atmel_lcdfb_blank(int blank_mode, struct fb_info *info) 805 { 806 struct atmel_lcdfb_info *sinfo = info->par; 807 808 switch (blank_mode) { 809 case FB_BLANK_UNBLANK: 810 case FB_BLANK_NORMAL: 811 atmel_lcdfb_start(sinfo); 812 break; 813 case FB_BLANK_VSYNC_SUSPEND: 814 case FB_BLANK_HSYNC_SUSPEND: 815 break; 816 case FB_BLANK_POWERDOWN: 817 atmel_lcdfb_stop(sinfo); 818 break; 819 default: 820 return -EINVAL; 821 } 822 823 /* let fbcon do a soft blank for us */ 824 return ((blank_mode == FB_BLANK_NORMAL) ? 1 : 0); 825 } 826 827 static const struct fb_ops atmel_lcdfb_ops = { 828 .owner = THIS_MODULE, 829 .fb_check_var = atmel_lcdfb_check_var, 830 .fb_set_par = atmel_lcdfb_set_par, 831 .fb_setcolreg = atmel_lcdfb_setcolreg, 832 .fb_blank = atmel_lcdfb_blank, 833 .fb_pan_display = atmel_lcdfb_pan_display, 834 .fb_fillrect = cfb_fillrect, 835 .fb_copyarea = cfb_copyarea, 836 .fb_imageblit = cfb_imageblit, 837 }; 838 839 static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id) 840 { 841 struct fb_info *info = dev_id; 842 struct atmel_lcdfb_info *sinfo = info->par; 843 u32 status; 844 845 status = lcdc_readl(sinfo, ATMEL_LCDC_ISR); 846 if (status & ATMEL_LCDC_UFLWI) { 847 dev_warn(info->device, "FIFO underflow %#x\n", status); 848 /* reset DMA and FIFO to avoid screen shifting */ 849 schedule_work(&sinfo->task); 850 } 851 lcdc_writel(sinfo, ATMEL_LCDC_ICR, status); 852 return IRQ_HANDLED; 853 } 854 855 /* 856 * LCD controller task (to reset the LCD) 857 */ 858 static void atmel_lcdfb_task(struct work_struct *work) 859 { 860 struct atmel_lcdfb_info *sinfo = 861 container_of(work, struct atmel_lcdfb_info, task); 862 863 atmel_lcdfb_reset(sinfo); 864 } 865 866 static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo) 867 { 868 struct fb_info *info = sinfo->info; 869 int ret = 0; 870 871 info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; 872 873 dev_info(info->device, 874 "%luKiB frame buffer at %08lx (mapped at %p)\n", 875 (unsigned long)info->fix.smem_len / 1024, 876 (unsigned long)info->fix.smem_start, 877 info->screen_base); 878 879 /* Allocate colormap */ 880 ret = fb_alloc_cmap(&info->cmap, 256, 0); 881 if (ret < 0) 882 dev_err(info->device, "Alloc color map failed\n"); 883 884 return ret; 885 } 886 887 static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo) 888 { 889 clk_prepare_enable(sinfo->bus_clk); 890 clk_prepare_enable(sinfo->lcdc_clk); 891 } 892 893 static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) 894 { 895 clk_disable_unprepare(sinfo->bus_clk); 896 clk_disable_unprepare(sinfo->lcdc_clk); 897 } 898 899 static const struct of_device_id atmel_lcdfb_dt_ids[] = { 900 { .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, }, 901 { .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, }, 902 { .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, }, 903 { .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, }, 904 { .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, }, 905 { .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, }, 906 { /* sentinel */ } 907 }; 908 909 MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids); 910 911 static const char *atmel_lcdfb_wiring_modes[] = { 912 [ATMEL_LCDC_WIRING_BGR] = "BRG", 913 [ATMEL_LCDC_WIRING_RGB] = "RGB", 914 }; 915 916 static int atmel_lcdfb_get_of_wiring_modes(struct device_node *np) 917 { 918 const char *mode; 919 int err, i; 920 921 err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode); 922 if (err < 0) 923 return ATMEL_LCDC_WIRING_BGR; 924 925 for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++) 926 if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i])) 927 return i; 928 929 return -ENODEV; 930 } 931 932 static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on) 933 { 934 struct atmel_lcdfb_power_ctrl_gpio *og; 935 936 list_for_each_entry(og, &pdata->pwr_gpios, list) 937 gpiod_set_value(og->gpiod, on); 938 } 939 940 static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) 941 { 942 struct fb_info *info = sinfo->info; 943 struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; 944 struct fb_var_screeninfo *var = &info->var; 945 struct device *dev = &sinfo->pdev->dev; 946 struct device_node *np =dev->of_node; 947 struct device_node *display_np; 948 struct atmel_lcdfb_power_ctrl_gpio *og; 949 bool is_gpio_power = false; 950 struct fb_videomode fb_vm; 951 struct gpio_desc *gpiod; 952 struct videomode vm; 953 int ret; 954 int i; 955 956 sinfo->config = (struct atmel_lcdfb_config*) 957 of_match_device(atmel_lcdfb_dt_ids, dev)->data; 958 959 display_np = of_parse_phandle(np, "display", 0); 960 if (!display_np) { 961 dev_err(dev, "failed to find display phandle\n"); 962 return -ENOENT; 963 } 964 965 ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel); 966 if (ret < 0) { 967 dev_err(dev, "failed to get property bits-per-pixel\n"); 968 goto put_display_node; 969 } 970 971 ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time); 972 if (ret < 0) { 973 dev_err(dev, "failed to get property atmel,guard-time\n"); 974 goto put_display_node; 975 } 976 977 ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2); 978 if (ret < 0) { 979 dev_err(dev, "failed to get property atmel,lcdcon2\n"); 980 goto put_display_node; 981 } 982 983 ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon); 984 if (ret < 0) { 985 dev_err(dev, "failed to get property bits-per-pixel\n"); 986 goto put_display_node; 987 } 988 989 INIT_LIST_HEAD(&pdata->pwr_gpios); 990 ret = -ENOMEM; 991 for (i = 0; i < gpiod_count(dev, "atmel,power-control"); i++) { 992 gpiod = devm_gpiod_get_index(dev, "atmel,power-control", 993 i, GPIOD_ASIS); 994 if (IS_ERR(gpiod)) 995 continue; 996 997 og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL); 998 if (!og) 999 goto put_display_node; 1000 1001 og->gpiod = gpiod; 1002 is_gpio_power = true; 1003 1004 ret = gpiod_direction_output(gpiod, gpiod_is_active_low(gpiod)); 1005 if (ret) { 1006 dev_err(dev, "set direction output gpio atmel,power-control[%d] failed\n", i); 1007 goto put_display_node; 1008 } 1009 list_add(&og->list, &pdata->pwr_gpios); 1010 } 1011 1012 if (is_gpio_power) 1013 pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio; 1014 1015 ret = atmel_lcdfb_get_of_wiring_modes(display_np); 1016 if (ret < 0) { 1017 dev_err(dev, "invalid atmel,lcd-wiring-mode\n"); 1018 goto put_display_node; 1019 } 1020 pdata->lcd_wiring_mode = ret; 1021 1022 pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight"); 1023 pdata->lcdcon_pol_negative = of_property_read_bool(display_np, "atmel,lcdcon-backlight-inverted"); 1024 1025 ret = of_get_videomode(display_np, &vm, OF_USE_NATIVE_MODE); 1026 if (ret) { 1027 dev_err(dev, "failed to get videomode from DT\n"); 1028 goto put_display_node; 1029 } 1030 1031 ret = fb_videomode_from_videomode(&vm, &fb_vm); 1032 if (ret < 0) 1033 goto put_display_node; 1034 1035 fb_add_videomode(&fb_vm, &info->modelist); 1036 1037 put_display_node: 1038 of_node_put(display_np); 1039 return ret; 1040 } 1041 1042 static int __init atmel_lcdfb_probe(struct platform_device *pdev) 1043 { 1044 struct device *dev = &pdev->dev; 1045 struct fb_info *info; 1046 struct atmel_lcdfb_info *sinfo; 1047 struct resource *regs = NULL; 1048 struct resource *map = NULL; 1049 struct fb_modelist *modelist; 1050 int ret; 1051 1052 dev_dbg(dev, "%s BEGIN\n", __func__); 1053 1054 ret = -ENOMEM; 1055 info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev); 1056 if (!info) 1057 goto out; 1058 1059 sinfo = info->par; 1060 sinfo->pdev = pdev; 1061 sinfo->info = info; 1062 1063 INIT_LIST_HEAD(&info->modelist); 1064 1065 if (pdev->dev.of_node) { 1066 ret = atmel_lcdfb_of_init(sinfo); 1067 if (ret) 1068 goto free_info; 1069 } else { 1070 dev_err(dev, "cannot get default configuration\n"); 1071 goto free_info; 1072 } 1073 1074 if (!sinfo->config) 1075 goto free_info; 1076 1077 sinfo->reg_lcd = devm_regulator_get(&pdev->dev, "lcd"); 1078 if (IS_ERR(sinfo->reg_lcd)) 1079 sinfo->reg_lcd = NULL; 1080 1081 info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK | 1082 FBINFO_HWACCEL_YPAN; 1083 info->pseudo_palette = sinfo->pseudo_palette; 1084 info->fbops = &atmel_lcdfb_ops; 1085 1086 info->fix = atmel_lcdfb_fix; 1087 strcpy(info->fix.id, sinfo->pdev->name); 1088 1089 /* Enable LCDC Clocks */ 1090 sinfo->bus_clk = clk_get(dev, "hclk"); 1091 if (IS_ERR(sinfo->bus_clk)) { 1092 ret = PTR_ERR(sinfo->bus_clk); 1093 goto free_info; 1094 } 1095 sinfo->lcdc_clk = clk_get(dev, "lcdc_clk"); 1096 if (IS_ERR(sinfo->lcdc_clk)) { 1097 ret = PTR_ERR(sinfo->lcdc_clk); 1098 goto put_bus_clk; 1099 } 1100 atmel_lcdfb_start_clock(sinfo); 1101 1102 modelist = list_first_entry(&info->modelist, 1103 struct fb_modelist, list); 1104 fb_videomode_to_var(&info->var, &modelist->mode); 1105 1106 atmel_lcdfb_check_var(&info->var, info); 1107 1108 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1109 if (!regs) { 1110 dev_err(dev, "resources unusable\n"); 1111 ret = -ENXIO; 1112 goto stop_clk; 1113 } 1114 1115 sinfo->irq_base = platform_get_irq(pdev, 0); 1116 if (sinfo->irq_base < 0) { 1117 ret = sinfo->irq_base; 1118 goto stop_clk; 1119 } 1120 1121 /* Initialize video memory */ 1122 map = platform_get_resource(pdev, IORESOURCE_MEM, 1); 1123 if (map) { 1124 /* use a pre-allocated memory buffer */ 1125 info->fix.smem_start = map->start; 1126 info->fix.smem_len = resource_size(map); 1127 if (!request_mem_region(info->fix.smem_start, 1128 info->fix.smem_len, pdev->name)) { 1129 ret = -EBUSY; 1130 goto stop_clk; 1131 } 1132 1133 info->screen_base = ioremap_wc(info->fix.smem_start, 1134 info->fix.smem_len); 1135 if (!info->screen_base) { 1136 ret = -ENOMEM; 1137 goto release_intmem; 1138 } 1139 1140 /* 1141 * Don't clear the framebuffer -- someone may have set 1142 * up a splash image. 1143 */ 1144 } else { 1145 /* allocate memory buffer */ 1146 ret = atmel_lcdfb_alloc_video_memory(sinfo); 1147 if (ret < 0) { 1148 dev_err(dev, "cannot allocate framebuffer: %d\n", ret); 1149 goto stop_clk; 1150 } 1151 } 1152 1153 /* LCDC registers */ 1154 info->fix.mmio_start = regs->start; 1155 info->fix.mmio_len = resource_size(regs); 1156 1157 if (!request_mem_region(info->fix.mmio_start, 1158 info->fix.mmio_len, pdev->name)) { 1159 ret = -EBUSY; 1160 goto free_fb; 1161 } 1162 1163 sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len); 1164 if (!sinfo->mmio) { 1165 dev_err(dev, "cannot map LCDC registers\n"); 1166 ret = -ENOMEM; 1167 goto release_mem; 1168 } 1169 1170 /* Initialize PWM for contrast or backlight ("off") */ 1171 init_contrast(sinfo); 1172 1173 /* interrupt */ 1174 ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info); 1175 if (ret) { 1176 dev_err(dev, "request_irq failed: %d\n", ret); 1177 goto unmap_mmio; 1178 } 1179 1180 /* Some operations on the LCDC might sleep and 1181 * require a preemptible task context */ 1182 INIT_WORK(&sinfo->task, atmel_lcdfb_task); 1183 1184 ret = atmel_lcdfb_init_fbinfo(sinfo); 1185 if (ret < 0) { 1186 dev_err(dev, "init fbinfo failed: %d\n", ret); 1187 goto unregister_irqs; 1188 } 1189 1190 ret = atmel_lcdfb_set_par(info); 1191 if (ret < 0) { 1192 dev_err(dev, "set par failed: %d\n", ret); 1193 goto unregister_irqs; 1194 } 1195 1196 dev_set_drvdata(dev, info); 1197 1198 /* 1199 * Tell the world that we're ready to go 1200 */ 1201 ret = register_framebuffer(info); 1202 if (ret < 0) { 1203 dev_err(dev, "failed to register framebuffer device: %d\n", ret); 1204 goto reset_drvdata; 1205 } 1206 1207 /* Power up the LCDC screen */ 1208 atmel_lcdfb_power_control(sinfo, 1); 1209 1210 dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n", 1211 info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base); 1212 1213 return 0; 1214 1215 reset_drvdata: 1216 dev_set_drvdata(dev, NULL); 1217 fb_dealloc_cmap(&info->cmap); 1218 unregister_irqs: 1219 cancel_work_sync(&sinfo->task); 1220 free_irq(sinfo->irq_base, info); 1221 unmap_mmio: 1222 exit_backlight(sinfo); 1223 iounmap(sinfo->mmio); 1224 release_mem: 1225 release_mem_region(info->fix.mmio_start, info->fix.mmio_len); 1226 free_fb: 1227 if (map) 1228 iounmap(info->screen_base); 1229 else 1230 atmel_lcdfb_free_video_memory(sinfo); 1231 1232 release_intmem: 1233 if (map) 1234 release_mem_region(info->fix.smem_start, info->fix.smem_len); 1235 stop_clk: 1236 atmel_lcdfb_stop_clock(sinfo); 1237 clk_put(sinfo->lcdc_clk); 1238 put_bus_clk: 1239 clk_put(sinfo->bus_clk); 1240 free_info: 1241 framebuffer_release(info); 1242 out: 1243 dev_dbg(dev, "%s FAILED\n", __func__); 1244 return ret; 1245 } 1246 1247 static int __exit atmel_lcdfb_remove(struct platform_device *pdev) 1248 { 1249 struct device *dev = &pdev->dev; 1250 struct fb_info *info = dev_get_drvdata(dev); 1251 struct atmel_lcdfb_info *sinfo; 1252 1253 if (!info || !info->par) 1254 return 0; 1255 sinfo = info->par; 1256 1257 cancel_work_sync(&sinfo->task); 1258 exit_backlight(sinfo); 1259 atmel_lcdfb_power_control(sinfo, 0); 1260 unregister_framebuffer(info); 1261 atmel_lcdfb_stop_clock(sinfo); 1262 clk_put(sinfo->lcdc_clk); 1263 clk_put(sinfo->bus_clk); 1264 fb_dealloc_cmap(&info->cmap); 1265 free_irq(sinfo->irq_base, info); 1266 iounmap(sinfo->mmio); 1267 release_mem_region(info->fix.mmio_start, info->fix.mmio_len); 1268 if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) { 1269 iounmap(info->screen_base); 1270 release_mem_region(info->fix.smem_start, info->fix.smem_len); 1271 } else { 1272 atmel_lcdfb_free_video_memory(sinfo); 1273 } 1274 1275 framebuffer_release(info); 1276 1277 return 0; 1278 } 1279 1280 #ifdef CONFIG_PM 1281 1282 static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg) 1283 { 1284 struct fb_info *info = platform_get_drvdata(pdev); 1285 struct atmel_lcdfb_info *sinfo = info->par; 1286 1287 /* 1288 * We don't want to handle interrupts while the clock is 1289 * stopped. It may take forever. 1290 */ 1291 lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0U); 1292 1293 sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR); 1294 lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0); 1295 atmel_lcdfb_power_control(sinfo, 0); 1296 atmel_lcdfb_stop(sinfo); 1297 atmel_lcdfb_stop_clock(sinfo); 1298 1299 return 0; 1300 } 1301 1302 static int atmel_lcdfb_resume(struct platform_device *pdev) 1303 { 1304 struct fb_info *info = platform_get_drvdata(pdev); 1305 struct atmel_lcdfb_info *sinfo = info->par; 1306 1307 atmel_lcdfb_start_clock(sinfo); 1308 atmel_lcdfb_start(sinfo); 1309 atmel_lcdfb_power_control(sinfo, 1); 1310 lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon); 1311 1312 /* Enable FIFO & DMA errors */ 1313 lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI 1314 | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI); 1315 1316 return 0; 1317 } 1318 1319 #else 1320 #define atmel_lcdfb_suspend NULL 1321 #define atmel_lcdfb_resume NULL 1322 #endif 1323 1324 static struct platform_driver atmel_lcdfb_driver = { 1325 .remove = __exit_p(atmel_lcdfb_remove), 1326 .suspend = atmel_lcdfb_suspend, 1327 .resume = atmel_lcdfb_resume, 1328 .driver = { 1329 .name = "atmel_lcdfb", 1330 .of_match_table = of_match_ptr(atmel_lcdfb_dt_ids), 1331 }, 1332 }; 1333 1334 module_platform_driver_probe(atmel_lcdfb_driver, atmel_lcdfb_probe); 1335 1336 MODULE_DESCRIPTION("AT91 LCD Controller framebuffer driver"); 1337 MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>"); 1338 MODULE_LICENSE("GPL"); 1339