1 /* 2 * linux/drivers/video/amba-clcd.c 3 * 4 * Copyright (C) 2001 ARM Limited, by David A Rusling 5 * Updated to 2.5, Deep Blue Solutions Ltd. 6 * 7 * This file is subject to the terms and conditions of the GNU General Public 8 * License. See the file COPYING in the main directory of this archive 9 * for more details. 10 * 11 * ARM PrimeCell PL110 Color LCD Controller 12 */ 13 #include <linux/amba/bus.h> 14 #include <linux/amba/clcd.h> 15 #include <linux/backlight.h> 16 #include <linux/clk.h> 17 #include <linux/delay.h> 18 #include <linux/dma-mapping.h> 19 #include <linux/fb.h> 20 #include <linux/init.h> 21 #include <linux/ioport.h> 22 #include <linux/list.h> 23 #include <linux/mm.h> 24 #include <linux/module.h> 25 #include <linux/of_address.h> 26 #include <linux/of_graph.h> 27 #include <linux/slab.h> 28 #include <linux/string.h> 29 #include <video/display_timing.h> 30 #include <video/of_display_timing.h> 31 #include <video/videomode.h> 32 33 #define to_clcd(info) container_of(info, struct clcd_fb, fb) 34 35 /* This is limited to 16 characters when displayed by X startup */ 36 static const char *clcd_name = "CLCD FB"; 37 38 /* 39 * Unfortunately, the enable/disable functions may be called either from 40 * process or IRQ context, and we _need_ to delay. This is _not_ good. 41 */ 42 static inline void clcdfb_sleep(unsigned int ms) 43 { 44 if (in_atomic()) { 45 mdelay(ms); 46 } else { 47 msleep(ms); 48 } 49 } 50 51 static inline void clcdfb_set_start(struct clcd_fb *fb) 52 { 53 unsigned long ustart = fb->fb.fix.smem_start; 54 unsigned long lstart; 55 56 ustart += fb->fb.var.yoffset * fb->fb.fix.line_length; 57 lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2; 58 59 writel(ustart, fb->regs + CLCD_UBAS); 60 writel(lstart, fb->regs + CLCD_LBAS); 61 } 62 63 static void clcdfb_disable(struct clcd_fb *fb) 64 { 65 u32 val; 66 67 if (fb->board->disable) 68 fb->board->disable(fb); 69 70 if (fb->panel->backlight) { 71 fb->panel->backlight->props.power = FB_BLANK_POWERDOWN; 72 backlight_update_status(fb->panel->backlight); 73 } 74 75 val = readl(fb->regs + fb->off_cntl); 76 if (val & CNTL_LCDPWR) { 77 val &= ~CNTL_LCDPWR; 78 writel(val, fb->regs + fb->off_cntl); 79 80 clcdfb_sleep(20); 81 } 82 if (val & CNTL_LCDEN) { 83 val &= ~CNTL_LCDEN; 84 writel(val, fb->regs + fb->off_cntl); 85 } 86 87 /* 88 * Disable CLCD clock source. 89 */ 90 if (fb->clk_enabled) { 91 fb->clk_enabled = false; 92 clk_disable(fb->clk); 93 } 94 } 95 96 static void clcdfb_enable(struct clcd_fb *fb, u32 cntl) 97 { 98 /* 99 * Enable the CLCD clock source. 100 */ 101 if (!fb->clk_enabled) { 102 fb->clk_enabled = true; 103 clk_enable(fb->clk); 104 } 105 106 /* 107 * Bring up by first enabling.. 108 */ 109 cntl |= CNTL_LCDEN; 110 writel(cntl, fb->regs + fb->off_cntl); 111 112 clcdfb_sleep(20); 113 114 /* 115 * and now apply power. 116 */ 117 cntl |= CNTL_LCDPWR; 118 writel(cntl, fb->regs + fb->off_cntl); 119 120 /* 121 * Turn on backlight 122 */ 123 if (fb->panel->backlight) { 124 fb->panel->backlight->props.power = FB_BLANK_UNBLANK; 125 backlight_update_status(fb->panel->backlight); 126 } 127 128 /* 129 * finally, enable the interface. 130 */ 131 if (fb->board->enable) 132 fb->board->enable(fb); 133 } 134 135 static int 136 clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) 137 { 138 u32 caps; 139 int ret = 0; 140 141 if (fb->panel->caps && fb->board->caps) 142 caps = fb->panel->caps & fb->board->caps; 143 else { 144 /* Old way of specifying what can be used */ 145 caps = fb->panel->cntl & CNTL_BGR ? 146 CLCD_CAP_BGR : CLCD_CAP_RGB; 147 /* But mask out 444 modes as they weren't supported */ 148 caps &= ~CLCD_CAP_444; 149 } 150 151 /* Only TFT panels can do RGB888/BGR888 */ 152 if (!(fb->panel->cntl & CNTL_LCDTFT)) 153 caps &= ~CLCD_CAP_888; 154 155 memset(&var->transp, 0, sizeof(var->transp)); 156 157 var->red.msb_right = 0; 158 var->green.msb_right = 0; 159 var->blue.msb_right = 0; 160 161 switch (var->bits_per_pixel) { 162 case 1: 163 case 2: 164 case 4: 165 case 8: 166 /* If we can't do 5551, reject */ 167 caps &= CLCD_CAP_5551; 168 if (!caps) { 169 ret = -EINVAL; 170 break; 171 } 172 173 var->red.length = var->bits_per_pixel; 174 var->red.offset = 0; 175 var->green.length = var->bits_per_pixel; 176 var->green.offset = 0; 177 var->blue.length = var->bits_per_pixel; 178 var->blue.offset = 0; 179 break; 180 181 case 16: 182 /* If we can't do 444, 5551 or 565, reject */ 183 if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) { 184 ret = -EINVAL; 185 break; 186 } 187 188 /* 189 * Green length can be 4, 5 or 6 depending whether 190 * we're operating in 444, 5551 or 565 mode. 191 */ 192 if (var->green.length == 4 && caps & CLCD_CAP_444) 193 caps &= CLCD_CAP_444; 194 if (var->green.length == 5 && caps & CLCD_CAP_5551) 195 caps &= CLCD_CAP_5551; 196 else if (var->green.length == 6 && caps & CLCD_CAP_565) 197 caps &= CLCD_CAP_565; 198 else { 199 /* 200 * PL110 officially only supports RGB555, 201 * but may be wired up to allow RGB565. 202 */ 203 if (caps & CLCD_CAP_565) { 204 var->green.length = 6; 205 caps &= CLCD_CAP_565; 206 } else if (caps & CLCD_CAP_5551) { 207 var->green.length = 5; 208 caps &= CLCD_CAP_5551; 209 } else { 210 var->green.length = 4; 211 caps &= CLCD_CAP_444; 212 } 213 } 214 215 if (var->green.length >= 5) { 216 var->red.length = 5; 217 var->blue.length = 5; 218 } else { 219 var->red.length = 4; 220 var->blue.length = 4; 221 } 222 break; 223 case 32: 224 /* If we can't do 888, reject */ 225 caps &= CLCD_CAP_888; 226 if (!caps) { 227 ret = -EINVAL; 228 break; 229 } 230 231 var->red.length = 8; 232 var->green.length = 8; 233 var->blue.length = 8; 234 break; 235 default: 236 ret = -EINVAL; 237 break; 238 } 239 240 /* 241 * >= 16bpp displays have separate colour component bitfields 242 * encoded in the pixel data. Calculate their position from 243 * the bitfield length defined above. 244 */ 245 if (ret == 0 && var->bits_per_pixel >= 16) { 246 bool bgr, rgb; 247 248 bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0; 249 rgb = caps & CLCD_CAP_RGB && var->red.offset == 0; 250 251 if (!bgr && !rgb) 252 /* 253 * The requested format was not possible, try just 254 * our capabilities. One of BGR or RGB must be 255 * supported. 256 */ 257 bgr = caps & CLCD_CAP_BGR; 258 259 if (bgr) { 260 var->blue.offset = 0; 261 var->green.offset = var->blue.offset + var->blue.length; 262 var->red.offset = var->green.offset + var->green.length; 263 } else { 264 var->red.offset = 0; 265 var->green.offset = var->red.offset + var->red.length; 266 var->blue.offset = var->green.offset + var->green.length; 267 } 268 } 269 270 return ret; 271 } 272 273 static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) 274 { 275 struct clcd_fb *fb = to_clcd(info); 276 int ret = -EINVAL; 277 278 if (fb->board->check) 279 ret = fb->board->check(fb, var); 280 281 if (ret == 0 && 282 var->xres_virtual * var->bits_per_pixel / 8 * 283 var->yres_virtual > fb->fb.fix.smem_len) 284 ret = -EINVAL; 285 286 if (ret == 0) 287 ret = clcdfb_set_bitfields(fb, var); 288 289 return ret; 290 } 291 292 static int clcdfb_set_par(struct fb_info *info) 293 { 294 struct clcd_fb *fb = to_clcd(info); 295 struct clcd_regs regs; 296 297 fb->fb.fix.line_length = fb->fb.var.xres_virtual * 298 fb->fb.var.bits_per_pixel / 8; 299 300 if (fb->fb.var.bits_per_pixel <= 8) 301 fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; 302 else 303 fb->fb.fix.visual = FB_VISUAL_TRUECOLOR; 304 305 fb->board->decode(fb, ®s); 306 307 clcdfb_disable(fb); 308 309 writel(regs.tim0, fb->regs + CLCD_TIM0); 310 writel(regs.tim1, fb->regs + CLCD_TIM1); 311 writel(regs.tim2, fb->regs + CLCD_TIM2); 312 writel(regs.tim3, fb->regs + CLCD_TIM3); 313 314 clcdfb_set_start(fb); 315 316 clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000); 317 318 fb->clcd_cntl = regs.cntl; 319 320 clcdfb_enable(fb, regs.cntl); 321 322 #ifdef DEBUG 323 printk(KERN_INFO 324 "CLCD: Registers set to\n" 325 " %08x %08x %08x %08x\n" 326 " %08x %08x %08x %08x\n", 327 readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1), 328 readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3), 329 readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS), 330 readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl)); 331 #endif 332 333 return 0; 334 } 335 336 static inline u32 convert_bitfield(int val, struct fb_bitfield *bf) 337 { 338 unsigned int mask = (1 << bf->length) - 1; 339 340 return (val >> (16 - bf->length) & mask) << bf->offset; 341 } 342 343 /* 344 * Set a single color register. The values supplied have a 16 bit 345 * magnitude. Return != 0 for invalid regno. 346 */ 347 static int 348 clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, 349 unsigned int blue, unsigned int transp, struct fb_info *info) 350 { 351 struct clcd_fb *fb = to_clcd(info); 352 353 if (regno < 16) 354 fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) | 355 convert_bitfield(blue, &fb->fb.var.blue) | 356 convert_bitfield(green, &fb->fb.var.green) | 357 convert_bitfield(red, &fb->fb.var.red); 358 359 if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) { 360 int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3); 361 u32 val, mask, newval; 362 363 newval = (red >> 11) & 0x001f; 364 newval |= (green >> 6) & 0x03e0; 365 newval |= (blue >> 1) & 0x7c00; 366 367 /* 368 * 3.2.11: if we're configured for big endian 369 * byte order, the palette entries are swapped. 370 */ 371 if (fb->clcd_cntl & CNTL_BEBO) 372 regno ^= 1; 373 374 if (regno & 1) { 375 newval <<= 16; 376 mask = 0x0000ffff; 377 } else { 378 mask = 0xffff0000; 379 } 380 381 val = readl(fb->regs + hw_reg) & mask; 382 writel(val | newval, fb->regs + hw_reg); 383 } 384 385 return regno > 255; 386 } 387 388 /* 389 * Blank the screen if blank_mode != 0, else unblank. If blank == NULL 390 * then the caller blanks by setting the CLUT (Color Look Up Table) to all 391 * black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due 392 * to e.g. a video mode which doesn't support it. Implements VESA suspend 393 * and powerdown modes on hardware that supports disabling hsync/vsync: 394 * blank_mode == 2: suspend vsync 395 * blank_mode == 3: suspend hsync 396 * blank_mode == 4: powerdown 397 */ 398 static int clcdfb_blank(int blank_mode, struct fb_info *info) 399 { 400 struct clcd_fb *fb = to_clcd(info); 401 402 if (blank_mode != 0) { 403 clcdfb_disable(fb); 404 } else { 405 clcdfb_enable(fb, fb->clcd_cntl); 406 } 407 return 0; 408 } 409 410 static int clcdfb_mmap(struct fb_info *info, 411 struct vm_area_struct *vma) 412 { 413 struct clcd_fb *fb = to_clcd(info); 414 unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT; 415 int ret = -EINVAL; 416 417 len = info->fix.smem_len; 418 419 if (off <= len && vma->vm_end - vma->vm_start <= len - off && 420 fb->board->mmap) 421 ret = fb->board->mmap(fb, vma); 422 423 return ret; 424 } 425 426 static struct fb_ops clcdfb_ops = { 427 .owner = THIS_MODULE, 428 .fb_check_var = clcdfb_check_var, 429 .fb_set_par = clcdfb_set_par, 430 .fb_setcolreg = clcdfb_setcolreg, 431 .fb_blank = clcdfb_blank, 432 .fb_fillrect = cfb_fillrect, 433 .fb_copyarea = cfb_copyarea, 434 .fb_imageblit = cfb_imageblit, 435 .fb_mmap = clcdfb_mmap, 436 }; 437 438 static int clcdfb_register(struct clcd_fb *fb) 439 { 440 int ret; 441 442 /* 443 * ARM PL111 always has IENB at 0x1c; it's only PL110 444 * which is reversed on some platforms. 445 */ 446 if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) { 447 fb->off_ienb = CLCD_PL111_IENB; 448 fb->off_cntl = CLCD_PL111_CNTL; 449 } else { 450 fb->off_ienb = CLCD_PL110_IENB; 451 fb->off_cntl = CLCD_PL110_CNTL; 452 } 453 454 fb->clk = clk_get(&fb->dev->dev, NULL); 455 if (IS_ERR(fb->clk)) { 456 ret = PTR_ERR(fb->clk); 457 goto out; 458 } 459 460 ret = clk_prepare(fb->clk); 461 if (ret) 462 goto free_clk; 463 464 fb->fb.device = &fb->dev->dev; 465 466 fb->fb.fix.mmio_start = fb->dev->res.start; 467 fb->fb.fix.mmio_len = resource_size(&fb->dev->res); 468 469 fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len); 470 if (!fb->regs) { 471 printk(KERN_ERR "CLCD: unable to remap registers\n"); 472 ret = -ENOMEM; 473 goto clk_unprep; 474 } 475 476 fb->fb.fbops = &clcdfb_ops; 477 fb->fb.flags = FBINFO_FLAG_DEFAULT; 478 fb->fb.pseudo_palette = fb->cmap; 479 480 strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id)); 481 fb->fb.fix.type = FB_TYPE_PACKED_PIXELS; 482 fb->fb.fix.type_aux = 0; 483 fb->fb.fix.xpanstep = 0; 484 fb->fb.fix.ypanstep = 0; 485 fb->fb.fix.ywrapstep = 0; 486 fb->fb.fix.accel = FB_ACCEL_NONE; 487 488 fb->fb.var.xres = fb->panel->mode.xres; 489 fb->fb.var.yres = fb->panel->mode.yres; 490 fb->fb.var.xres_virtual = fb->panel->mode.xres; 491 fb->fb.var.yres_virtual = fb->panel->mode.yres; 492 fb->fb.var.bits_per_pixel = fb->panel->bpp; 493 fb->fb.var.grayscale = fb->panel->grayscale; 494 fb->fb.var.pixclock = fb->panel->mode.pixclock; 495 fb->fb.var.left_margin = fb->panel->mode.left_margin; 496 fb->fb.var.right_margin = fb->panel->mode.right_margin; 497 fb->fb.var.upper_margin = fb->panel->mode.upper_margin; 498 fb->fb.var.lower_margin = fb->panel->mode.lower_margin; 499 fb->fb.var.hsync_len = fb->panel->mode.hsync_len; 500 fb->fb.var.vsync_len = fb->panel->mode.vsync_len; 501 fb->fb.var.sync = fb->panel->mode.sync; 502 fb->fb.var.vmode = fb->panel->mode.vmode; 503 fb->fb.var.activate = FB_ACTIVATE_NOW; 504 fb->fb.var.nonstd = 0; 505 fb->fb.var.height = fb->panel->height; 506 fb->fb.var.width = fb->panel->width; 507 fb->fb.var.accel_flags = 0; 508 509 fb->fb.monspecs.hfmin = 0; 510 fb->fb.monspecs.hfmax = 100000; 511 fb->fb.monspecs.vfmin = 0; 512 fb->fb.monspecs.vfmax = 400; 513 fb->fb.monspecs.dclkmin = 1000000; 514 fb->fb.monspecs.dclkmax = 100000000; 515 516 /* 517 * Make sure that the bitfields are set appropriately. 518 */ 519 clcdfb_set_bitfields(fb, &fb->fb.var); 520 521 /* 522 * Allocate colourmap. 523 */ 524 ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0); 525 if (ret) 526 goto unmap; 527 528 /* 529 * Ensure interrupts are disabled. 530 */ 531 writel(0, fb->regs + fb->off_ienb); 532 533 fb_set_var(&fb->fb, &fb->fb.var); 534 535 dev_info(&fb->dev->dev, "%s hardware, %s display\n", 536 fb->board->name, fb->panel->mode.name); 537 538 ret = register_framebuffer(&fb->fb); 539 if (ret == 0) 540 goto out; 541 542 printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret); 543 544 fb_dealloc_cmap(&fb->fb.cmap); 545 unmap: 546 iounmap(fb->regs); 547 clk_unprep: 548 clk_unprepare(fb->clk); 549 free_clk: 550 clk_put(fb->clk); 551 out: 552 return ret; 553 } 554 555 #ifdef CONFIG_OF 556 static int clcdfb_of_get_dpi_panel_mode(struct device_node *node, 557 struct clcd_panel *clcd_panel) 558 { 559 int err; 560 struct display_timing timing; 561 struct videomode video; 562 563 err = of_get_display_timing(node, "panel-timing", &timing); 564 if (err) { 565 pr_err("%pOF: problems parsing panel-timing (%d)\n", node, err); 566 return err; 567 } 568 569 videomode_from_timing(&timing, &video); 570 571 err = fb_videomode_from_videomode(&video, &clcd_panel->mode); 572 if (err) 573 return err; 574 575 /* Set up some inversion flags */ 576 if (timing.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) 577 clcd_panel->tim2 |= TIM2_IPC; 578 else if (!(timing.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)) 579 /* 580 * To preserve backwards compatibility, the IPC (inverted 581 * pixel clock) flag needs to be set on any display that 582 * doesn't explicitly specify that the pixel clock is 583 * active on the negative or positive edge. 584 */ 585 clcd_panel->tim2 |= TIM2_IPC; 586 587 if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW) 588 clcd_panel->tim2 |= TIM2_IHS; 589 590 if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW) 591 clcd_panel->tim2 |= TIM2_IVS; 592 593 if (timing.flags & DISPLAY_FLAGS_DE_LOW) 594 clcd_panel->tim2 |= TIM2_IOE; 595 596 return 0; 597 } 598 599 static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode) 600 { 601 return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres, 602 mode->refresh); 603 } 604 605 static int clcdfb_of_get_backlight(struct device_node *panel, 606 struct clcd_panel *clcd_panel) 607 { 608 struct device_node *backlight; 609 610 /* Look up the optional backlight phandle */ 611 backlight = of_parse_phandle(panel, "backlight", 0); 612 if (backlight) { 613 clcd_panel->backlight = of_find_backlight_by_node(backlight); 614 of_node_put(backlight); 615 616 if (!clcd_panel->backlight) 617 return -EPROBE_DEFER; 618 } 619 return 0; 620 } 621 622 static int clcdfb_of_get_mode(struct device *dev, struct device_node *panel, 623 struct clcd_panel *clcd_panel) 624 { 625 int err; 626 struct fb_videomode *mode; 627 char *name; 628 int len; 629 630 /* Only directly connected DPI panels supported for now */ 631 if (of_device_is_compatible(panel, "panel-dpi")) 632 err = clcdfb_of_get_dpi_panel_mode(panel, clcd_panel); 633 else 634 err = -ENOENT; 635 if (err) 636 return err; 637 mode = &clcd_panel->mode; 638 639 len = clcdfb_snprintf_mode(NULL, 0, mode); 640 name = devm_kzalloc(dev, len + 1, GFP_KERNEL); 641 if (!name) 642 return -ENOMEM; 643 644 clcdfb_snprintf_mode(name, len + 1, mode); 645 mode->name = name; 646 647 return 0; 648 } 649 650 static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0) 651 { 652 static struct { 653 unsigned int part; 654 u32 r0, g0, b0; 655 u32 caps; 656 } panels[] = { 657 { 0x110, 1, 7, 13, CLCD_CAP_5551 }, 658 { 0x110, 0, 8, 16, CLCD_CAP_888 }, 659 { 0x110, 16, 8, 0, CLCD_CAP_888 }, 660 { 0x111, 4, 14, 20, CLCD_CAP_444 }, 661 { 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 }, 662 { 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 | 663 CLCD_CAP_565 }, 664 { 0x111, 0, 8, 16, CLCD_CAP_444 | CLCD_CAP_5551 | 665 CLCD_CAP_565 | CLCD_CAP_888 }, 666 }; 667 int i; 668 669 /* Bypass pixel clock divider */ 670 fb->panel->tim2 |= TIM2_BCD; 671 672 /* TFT display, vert. comp. interrupt at the start of the back porch */ 673 fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1); 674 675 fb->panel->caps = 0; 676 677 /* Match the setup with known variants */ 678 for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) { 679 if (amba_part(fb->dev) != panels[i].part) 680 continue; 681 if (g0 != panels[i].g0) 682 continue; 683 if (r0 == panels[i].r0 && b0 == panels[i].b0) 684 fb->panel->caps = panels[i].caps; 685 } 686 687 /* 688 * If we actually physically connected the R lines to B and 689 * vice versa 690 */ 691 if (r0 != 0 && b0 == 0) 692 fb->panel->bgr_connection = true; 693 694 return fb->panel->caps ? 0 : -EINVAL; 695 } 696 697 static int clcdfb_of_init_display(struct clcd_fb *fb) 698 { 699 struct device_node *endpoint, *panel; 700 int err; 701 unsigned int bpp; 702 u32 max_bandwidth; 703 u32 tft_r0b0g0[3]; 704 705 fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL); 706 if (!fb->panel) 707 return -ENOMEM; 708 709 /* 710 * Fetch the panel endpoint. 711 */ 712 endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL); 713 if (!endpoint) 714 return -ENODEV; 715 716 panel = of_graph_get_remote_port_parent(endpoint); 717 if (!panel) 718 return -ENODEV; 719 720 err = clcdfb_of_get_backlight(panel, fb->panel); 721 if (err) 722 return err; 723 724 err = clcdfb_of_get_mode(&fb->dev->dev, panel, fb->panel); 725 if (err) 726 return err; 727 728 err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth", 729 &max_bandwidth); 730 if (!err) { 731 /* 732 * max_bandwidth is in bytes per second and pixclock in 733 * pico-seconds, so the maximum allowed bits per pixel is 734 * 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000) 735 * Rearrange this calculation to avoid overflow and then ensure 736 * result is a valid format. 737 */ 738 bpp = max_bandwidth / (1000 / 8) 739 / PICOS2KHZ(fb->panel->mode.pixclock); 740 bpp = rounddown_pow_of_two(bpp); 741 if (bpp > 32) 742 bpp = 32; 743 } else 744 bpp = 32; 745 fb->panel->bpp = bpp; 746 747 #ifdef CONFIG_CPU_BIG_ENDIAN 748 fb->panel->cntl |= CNTL_BEBO; 749 #endif 750 fb->panel->width = -1; 751 fb->panel->height = -1; 752 753 if (of_property_read_u32_array(endpoint, 754 "arm,pl11x,tft-r0g0b0-pads", 755 tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) != 0) 756 return -ENOENT; 757 758 return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0], 759 tft_r0b0g0[1], tft_r0b0g0[2]); 760 } 761 762 static int clcdfb_of_vram_setup(struct clcd_fb *fb) 763 { 764 int err; 765 struct device_node *memory; 766 u64 size; 767 768 err = clcdfb_of_init_display(fb); 769 if (err) 770 return err; 771 772 memory = of_parse_phandle(fb->dev->dev.of_node, "memory-region", 0); 773 if (!memory) 774 return -ENODEV; 775 776 fb->fb.screen_base = of_iomap(memory, 0); 777 if (!fb->fb.screen_base) 778 return -ENOMEM; 779 780 fb->fb.fix.smem_start = of_translate_address(memory, 781 of_get_address(memory, 0, &size, NULL)); 782 fb->fb.fix.smem_len = size; 783 784 return 0; 785 } 786 787 static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) 788 { 789 unsigned long off, user_size, kernel_size; 790 791 792 off = vma->vm_pgoff << PAGE_SHIFT; 793 user_size = vma->vm_end - vma->vm_start; 794 kernel_size = fb->fb.fix.smem_len; 795 796 if (off >= kernel_size || user_size > (kernel_size - off)) 797 return -ENXIO; 798 799 return remap_pfn_range(vma, vma->vm_start, 800 __phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff, 801 user_size, 802 pgprot_writecombine(vma->vm_page_prot)); 803 } 804 805 static void clcdfb_of_vram_remove(struct clcd_fb *fb) 806 { 807 iounmap(fb->fb.screen_base); 808 } 809 810 static int clcdfb_of_dma_setup(struct clcd_fb *fb) 811 { 812 unsigned long framesize; 813 dma_addr_t dma; 814 int err; 815 816 err = clcdfb_of_init_display(fb); 817 if (err) 818 return err; 819 820 framesize = PAGE_ALIGN(fb->panel->mode.xres * fb->panel->mode.yres * 821 fb->panel->bpp / 8); 822 fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize, 823 &dma, GFP_KERNEL); 824 if (!fb->fb.screen_base) 825 return -ENOMEM; 826 827 fb->fb.fix.smem_start = dma; 828 fb->fb.fix.smem_len = framesize; 829 830 return 0; 831 } 832 833 static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) 834 { 835 return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, 836 fb->fb.fix.smem_start, fb->fb.fix.smem_len); 837 } 838 839 static void clcdfb_of_dma_remove(struct clcd_fb *fb) 840 { 841 dma_free_coherent(&fb->dev->dev, fb->fb.fix.smem_len, 842 fb->fb.screen_base, fb->fb.fix.smem_start); 843 } 844 845 static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev) 846 { 847 struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board), 848 GFP_KERNEL); 849 struct device_node *node = dev->dev.of_node; 850 851 if (!board) 852 return NULL; 853 854 board->name = of_node_full_name(node); 855 board->caps = CLCD_CAP_ALL; 856 board->check = clcdfb_check; 857 board->decode = clcdfb_decode; 858 if (of_find_property(node, "memory-region", NULL)) { 859 board->setup = clcdfb_of_vram_setup; 860 board->mmap = clcdfb_of_vram_mmap; 861 board->remove = clcdfb_of_vram_remove; 862 } else { 863 board->setup = clcdfb_of_dma_setup; 864 board->mmap = clcdfb_of_dma_mmap; 865 board->remove = clcdfb_of_dma_remove; 866 } 867 868 return board; 869 } 870 #else 871 static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev) 872 { 873 return NULL; 874 } 875 #endif 876 877 static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) 878 { 879 struct clcd_board *board = dev_get_platdata(&dev->dev); 880 struct clcd_fb *fb; 881 int ret; 882 883 if (!board) 884 board = clcdfb_of_get_board(dev); 885 886 if (!board) 887 return -EINVAL; 888 889 ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); 890 if (ret) 891 goto out; 892 893 ret = amba_request_regions(dev, NULL); 894 if (ret) { 895 printk(KERN_ERR "CLCD: unable to reserve regs region\n"); 896 goto out; 897 } 898 899 fb = kzalloc(sizeof(*fb), GFP_KERNEL); 900 if (!fb) { 901 ret = -ENOMEM; 902 goto free_region; 903 } 904 905 fb->dev = dev; 906 fb->board = board; 907 908 dev_info(&fb->dev->dev, "PL%03x designer %02x rev%u at 0x%08llx\n", 909 amba_part(dev), amba_manf(dev), amba_rev(dev), 910 (unsigned long long)dev->res.start); 911 912 ret = fb->board->setup(fb); 913 if (ret) 914 goto free_fb; 915 916 ret = clcdfb_register(fb); 917 if (ret == 0) { 918 amba_set_drvdata(dev, fb); 919 goto out; 920 } 921 922 fb->board->remove(fb); 923 free_fb: 924 kfree(fb); 925 free_region: 926 amba_release_regions(dev); 927 out: 928 return ret; 929 } 930 931 static int clcdfb_remove(struct amba_device *dev) 932 { 933 struct clcd_fb *fb = amba_get_drvdata(dev); 934 935 clcdfb_disable(fb); 936 unregister_framebuffer(&fb->fb); 937 if (fb->fb.cmap.len) 938 fb_dealloc_cmap(&fb->fb.cmap); 939 iounmap(fb->regs); 940 clk_unprepare(fb->clk); 941 clk_put(fb->clk); 942 943 fb->board->remove(fb); 944 945 kfree(fb); 946 947 amba_release_regions(dev); 948 949 return 0; 950 } 951 952 static const struct amba_id clcdfb_id_table[] = { 953 { 954 .id = 0x00041110, 955 .mask = 0x000ffffe, 956 }, 957 { 0, 0 }, 958 }; 959 960 MODULE_DEVICE_TABLE(amba, clcdfb_id_table); 961 962 static struct amba_driver clcd_driver = { 963 .drv = { 964 .name = "clcd-pl11x", 965 }, 966 .probe = clcdfb_probe, 967 .remove = clcdfb_remove, 968 .id_table = clcdfb_id_table, 969 }; 970 971 static int __init amba_clcdfb_init(void) 972 { 973 if (fb_get_options("ambafb", NULL)) 974 return -ENODEV; 975 976 return amba_driver_register(&clcd_driver); 977 } 978 979 module_init(amba_clcdfb_init); 980 981 static void __exit amba_clcdfb_exit(void) 982 { 983 amba_driver_unregister(&clcd_driver); 984 } 985 986 module_exit(amba_clcdfb_exit); 987 988 MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver"); 989 MODULE_LICENSE("GPL"); 990