xref: /openbmc/linux/drivers/usb/usbip/stub_rx.c (revision b830f94f)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2003-2008 Takahiro Hirofuchi
4  */
5 
6 #include <asm/byteorder.h>
7 #include <linux/kthread.h>
8 #include <linux/usb.h>
9 #include <linux/usb/hcd.h>
10 
11 #include "usbip_common.h"
12 #include "stub.h"
13 
14 static int is_clear_halt_cmd(struct urb *urb)
15 {
16 	struct usb_ctrlrequest *req;
17 
18 	req = (struct usb_ctrlrequest *) urb->setup_packet;
19 
20 	return (req->bRequest == USB_REQ_CLEAR_FEATURE) &&
21 	       (req->bRequestType == USB_RECIP_ENDPOINT) &&
22 	       (req->wValue == USB_ENDPOINT_HALT);
23 }
24 
25 static int is_set_interface_cmd(struct urb *urb)
26 {
27 	struct usb_ctrlrequest *req;
28 
29 	req = (struct usb_ctrlrequest *) urb->setup_packet;
30 
31 	return (req->bRequest == USB_REQ_SET_INTERFACE) &&
32 		(req->bRequestType == USB_RECIP_INTERFACE);
33 }
34 
35 static int is_set_configuration_cmd(struct urb *urb)
36 {
37 	struct usb_ctrlrequest *req;
38 
39 	req = (struct usb_ctrlrequest *) urb->setup_packet;
40 
41 	return (req->bRequest == USB_REQ_SET_CONFIGURATION) &&
42 		(req->bRequestType == USB_RECIP_DEVICE);
43 }
44 
45 static int is_reset_device_cmd(struct urb *urb)
46 {
47 	struct usb_ctrlrequest *req;
48 	__u16 value;
49 	__u16 index;
50 
51 	req = (struct usb_ctrlrequest *) urb->setup_packet;
52 	value = le16_to_cpu(req->wValue);
53 	index = le16_to_cpu(req->wIndex);
54 
55 	if ((req->bRequest == USB_REQ_SET_FEATURE) &&
56 	    (req->bRequestType == USB_RT_PORT) &&
57 	    (value == USB_PORT_FEAT_RESET)) {
58 		usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index);
59 		return 1;
60 	} else
61 		return 0;
62 }
63 
64 static int tweak_clear_halt_cmd(struct urb *urb)
65 {
66 	struct usb_ctrlrequest *req;
67 	int target_endp;
68 	int target_dir;
69 	int target_pipe;
70 	int ret;
71 
72 	req = (struct usb_ctrlrequest *) urb->setup_packet;
73 
74 	/*
75 	 * The stalled endpoint is specified in the wIndex value. The endpoint
76 	 * of the urb is the target of this clear_halt request (i.e., control
77 	 * endpoint).
78 	 */
79 	target_endp = le16_to_cpu(req->wIndex) & 0x000f;
80 
81 	/* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80.  */
82 	target_dir = le16_to_cpu(req->wIndex) & 0x0080;
83 
84 	if (target_dir)
85 		target_pipe = usb_rcvctrlpipe(urb->dev, target_endp);
86 	else
87 		target_pipe = usb_sndctrlpipe(urb->dev, target_endp);
88 
89 	ret = usb_clear_halt(urb->dev, target_pipe);
90 	if (ret < 0)
91 		dev_err(&urb->dev->dev,
92 			"usb_clear_halt error: devnum %d endp %d ret %d\n",
93 			urb->dev->devnum, target_endp, ret);
94 	else
95 		dev_info(&urb->dev->dev,
96 			 "usb_clear_halt done: devnum %d endp %d\n",
97 			 urb->dev->devnum, target_endp);
98 
99 	return ret;
100 }
101 
102 static int tweak_set_interface_cmd(struct urb *urb)
103 {
104 	struct usb_ctrlrequest *req;
105 	__u16 alternate;
106 	__u16 interface;
107 	int ret;
108 
109 	req = (struct usb_ctrlrequest *) urb->setup_packet;
110 	alternate = le16_to_cpu(req->wValue);
111 	interface = le16_to_cpu(req->wIndex);
112 
113 	usbip_dbg_stub_rx("set_interface: inf %u alt %u\n",
114 			  interface, alternate);
115 
116 	ret = usb_set_interface(urb->dev, interface, alternate);
117 	if (ret < 0)
118 		dev_err(&urb->dev->dev,
119 			"usb_set_interface error: inf %u alt %u ret %d\n",
120 			interface, alternate, ret);
121 	else
122 		dev_info(&urb->dev->dev,
123 			"usb_set_interface done: inf %u alt %u\n",
124 			interface, alternate);
125 
126 	return ret;
127 }
128 
129 static int tweak_set_configuration_cmd(struct urb *urb)
130 {
131 	struct stub_priv *priv = (struct stub_priv *) urb->context;
132 	struct stub_device *sdev = priv->sdev;
133 	struct usb_ctrlrequest *req;
134 	__u16 config;
135 	int err;
136 
137 	req = (struct usb_ctrlrequest *) urb->setup_packet;
138 	config = le16_to_cpu(req->wValue);
139 
140 	err = usb_set_configuration(sdev->udev, config);
141 	if (err && err != -ENODEV)
142 		dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n",
143 			config, err);
144 	return 0;
145 }
146 
147 static int tweak_reset_device_cmd(struct urb *urb)
148 {
149 	struct stub_priv *priv = (struct stub_priv *) urb->context;
150 	struct stub_device *sdev = priv->sdev;
151 
152 	dev_info(&urb->dev->dev, "usb_queue_reset_device\n");
153 
154 	if (usb_lock_device_for_reset(sdev->udev, NULL) < 0) {
155 		dev_err(&urb->dev->dev, "could not obtain lock to reset device\n");
156 		return 0;
157 	}
158 	usb_reset_device(sdev->udev);
159 	usb_unlock_device(sdev->udev);
160 
161 	return 0;
162 }
163 
164 /*
165  * clear_halt, set_interface, and set_configuration require special tricks.
166  */
167 static void tweak_special_requests(struct urb *urb)
168 {
169 	if (!urb || !urb->setup_packet)
170 		return;
171 
172 	if (usb_pipetype(urb->pipe) != PIPE_CONTROL)
173 		return;
174 
175 	if (is_clear_halt_cmd(urb))
176 		/* tweak clear_halt */
177 		 tweak_clear_halt_cmd(urb);
178 
179 	else if (is_set_interface_cmd(urb))
180 		/* tweak set_interface */
181 		tweak_set_interface_cmd(urb);
182 
183 	else if (is_set_configuration_cmd(urb))
184 		/* tweak set_configuration */
185 		tweak_set_configuration_cmd(urb);
186 
187 	else if (is_reset_device_cmd(urb))
188 		tweak_reset_device_cmd(urb);
189 	else
190 		usbip_dbg_stub_rx("no need to tweak\n");
191 }
192 
193 /*
194  * stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb().
195  * By unlinking the urb asynchronously, stub_rx can continuously
196  * process coming urbs.  Even if the urb is unlinked, its completion
197  * handler will be called and stub_tx will send a return pdu.
198  *
199  * See also comments about unlinking strategy in vhci_hcd.c.
200  */
201 static int stub_recv_cmd_unlink(struct stub_device *sdev,
202 				struct usbip_header *pdu)
203 {
204 	int ret;
205 	unsigned long flags;
206 	struct stub_priv *priv;
207 
208 	spin_lock_irqsave(&sdev->priv_lock, flags);
209 
210 	list_for_each_entry(priv, &sdev->priv_init, list) {
211 		if (priv->seqnum != pdu->u.cmd_unlink.seqnum)
212 			continue;
213 
214 		/*
215 		 * This matched urb is not completed yet (i.e., be in
216 		 * flight in usb hcd hardware/driver). Now we are
217 		 * cancelling it. The unlinking flag means that we are
218 		 * now not going to return the normal result pdu of a
219 		 * submission request, but going to return a result pdu
220 		 * of the unlink request.
221 		 */
222 		priv->unlinking = 1;
223 
224 		/*
225 		 * In the case that unlinking flag is on, prev->seqnum
226 		 * is changed from the seqnum of the cancelling urb to
227 		 * the seqnum of the unlink request. This will be used
228 		 * to make the result pdu of the unlink request.
229 		 */
230 		priv->seqnum = pdu->base.seqnum;
231 
232 		spin_unlock_irqrestore(&sdev->priv_lock, flags);
233 
234 		/*
235 		 * usb_unlink_urb() is now out of spinlocking to avoid
236 		 * spinlock recursion since stub_complete() is
237 		 * sometimes called in this context but not in the
238 		 * interrupt context.  If stub_complete() is executed
239 		 * before we call usb_unlink_urb(), usb_unlink_urb()
240 		 * will return an error value. In this case, stub_tx
241 		 * will return the result pdu of this unlink request
242 		 * though submission is completed and actual unlinking
243 		 * is not executed. OK?
244 		 */
245 		/* In the above case, urb->status is not -ECONNRESET,
246 		 * so a driver in a client host will know the failure
247 		 * of the unlink request ?
248 		 */
249 		ret = usb_unlink_urb(priv->urb);
250 		if (ret != -EINPROGRESS)
251 			dev_err(&priv->urb->dev->dev,
252 				"failed to unlink a urb # %lu, ret %d\n",
253 				priv->seqnum, ret);
254 
255 		return 0;
256 	}
257 
258 	usbip_dbg_stub_rx("seqnum %d is not pending\n",
259 			  pdu->u.cmd_unlink.seqnum);
260 
261 	/*
262 	 * The urb of the unlink target is not found in priv_init queue. It was
263 	 * already completed and its results is/was going to be sent by a
264 	 * CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only
265 	 * return the completeness of this unlink request to vhci_hcd.
266 	 */
267 	stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0);
268 
269 	spin_unlock_irqrestore(&sdev->priv_lock, flags);
270 
271 	return 0;
272 }
273 
274 static int valid_request(struct stub_device *sdev, struct usbip_header *pdu)
275 {
276 	struct usbip_device *ud = &sdev->ud;
277 	int valid = 0;
278 
279 	if (pdu->base.devid == sdev->devid) {
280 		spin_lock_irq(&ud->lock);
281 		if (ud->status == SDEV_ST_USED) {
282 			/* A request is valid. */
283 			valid = 1;
284 		}
285 		spin_unlock_irq(&ud->lock);
286 	}
287 
288 	return valid;
289 }
290 
291 static struct stub_priv *stub_priv_alloc(struct stub_device *sdev,
292 					 struct usbip_header *pdu)
293 {
294 	struct stub_priv *priv;
295 	struct usbip_device *ud = &sdev->ud;
296 	unsigned long flags;
297 
298 	spin_lock_irqsave(&sdev->priv_lock, flags);
299 
300 	priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC);
301 	if (!priv) {
302 		dev_err(&sdev->udev->dev, "alloc stub_priv\n");
303 		spin_unlock_irqrestore(&sdev->priv_lock, flags);
304 		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
305 		return NULL;
306 	}
307 
308 	priv->seqnum = pdu->base.seqnum;
309 	priv->sdev = sdev;
310 
311 	/*
312 	 * After a stub_priv is linked to a list_head,
313 	 * our error handler can free allocated data.
314 	 */
315 	list_add_tail(&priv->list, &sdev->priv_init);
316 
317 	spin_unlock_irqrestore(&sdev->priv_lock, flags);
318 
319 	return priv;
320 }
321 
322 static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu)
323 {
324 	struct usb_device *udev = sdev->udev;
325 	struct usb_host_endpoint *ep;
326 	struct usb_endpoint_descriptor *epd = NULL;
327 	int epnum = pdu->base.ep;
328 	int dir = pdu->base.direction;
329 
330 	if (epnum < 0 || epnum > 15)
331 		goto err_ret;
332 
333 	if (dir == USBIP_DIR_IN)
334 		ep = udev->ep_in[epnum & 0x7f];
335 	else
336 		ep = udev->ep_out[epnum & 0x7f];
337 	if (!ep)
338 		goto err_ret;
339 
340 	epd = &ep->desc;
341 
342 	if (usb_endpoint_xfer_control(epd)) {
343 		if (dir == USBIP_DIR_OUT)
344 			return usb_sndctrlpipe(udev, epnum);
345 		else
346 			return usb_rcvctrlpipe(udev, epnum);
347 	}
348 
349 	if (usb_endpoint_xfer_bulk(epd)) {
350 		if (dir == USBIP_DIR_OUT)
351 			return usb_sndbulkpipe(udev, epnum);
352 		else
353 			return usb_rcvbulkpipe(udev, epnum);
354 	}
355 
356 	if (usb_endpoint_xfer_int(epd)) {
357 		if (dir == USBIP_DIR_OUT)
358 			return usb_sndintpipe(udev, epnum);
359 		else
360 			return usb_rcvintpipe(udev, epnum);
361 	}
362 
363 	if (usb_endpoint_xfer_isoc(epd)) {
364 		/* validate number of packets */
365 		if (pdu->u.cmd_submit.number_of_packets < 0 ||
366 		    pdu->u.cmd_submit.number_of_packets >
367 		    USBIP_MAX_ISO_PACKETS) {
368 			dev_err(&sdev->udev->dev,
369 				"CMD_SUBMIT: isoc invalid num packets %d\n",
370 				pdu->u.cmd_submit.number_of_packets);
371 			return -1;
372 		}
373 		if (dir == USBIP_DIR_OUT)
374 			return usb_sndisocpipe(udev, epnum);
375 		else
376 			return usb_rcvisocpipe(udev, epnum);
377 	}
378 
379 err_ret:
380 	/* NOT REACHED */
381 	dev_err(&sdev->udev->dev, "CMD_SUBMIT: invalid epnum %d\n", epnum);
382 	return -1;
383 }
384 
385 static void masking_bogus_flags(struct urb *urb)
386 {
387 	int				xfertype;
388 	struct usb_device		*dev;
389 	struct usb_host_endpoint	*ep;
390 	int				is_out;
391 	unsigned int	allowed;
392 
393 	if (!urb || urb->hcpriv || !urb->complete)
394 		return;
395 	dev = urb->dev;
396 	if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
397 		return;
398 
399 	ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
400 		[usb_pipeendpoint(urb->pipe)];
401 	if (!ep)
402 		return;
403 
404 	xfertype = usb_endpoint_type(&ep->desc);
405 	if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
406 		struct usb_ctrlrequest *setup =
407 			(struct usb_ctrlrequest *) urb->setup_packet;
408 
409 		if (!setup)
410 			return;
411 		is_out = !(setup->bRequestType & USB_DIR_IN) ||
412 			!setup->wLength;
413 	} else {
414 		is_out = usb_endpoint_dir_out(&ep->desc);
415 	}
416 
417 	/* enforce simple/standard policy */
418 	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT |
419 		   URB_DIR_MASK | URB_FREE_BUFFER);
420 	switch (xfertype) {
421 	case USB_ENDPOINT_XFER_BULK:
422 		if (is_out)
423 			allowed |= URB_ZERO_PACKET;
424 		/* FALLTHROUGH */
425 	default:			/* all non-iso endpoints */
426 		if (!is_out)
427 			allowed |= URB_SHORT_NOT_OK;
428 		break;
429 	case USB_ENDPOINT_XFER_ISOC:
430 		allowed |= URB_ISO_ASAP;
431 		break;
432 	}
433 	urb->transfer_flags &= allowed;
434 }
435 
436 static void stub_recv_cmd_submit(struct stub_device *sdev,
437 				 struct usbip_header *pdu)
438 {
439 	int ret;
440 	struct stub_priv *priv;
441 	struct usbip_device *ud = &sdev->ud;
442 	struct usb_device *udev = sdev->udev;
443 	int pipe = get_pipe(sdev, pdu);
444 
445 	if (pipe == -1)
446 		return;
447 
448 	priv = stub_priv_alloc(sdev, pdu);
449 	if (!priv)
450 		return;
451 
452 	/* setup a urb */
453 	if (usb_pipeisoc(pipe))
454 		priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets,
455 					  GFP_KERNEL);
456 	else
457 		priv->urb = usb_alloc_urb(0, GFP_KERNEL);
458 
459 	if (!priv->urb) {
460 		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
461 		return;
462 	}
463 
464 	/* allocate urb transfer buffer, if needed */
465 	if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
466 		priv->urb->transfer_buffer =
467 			kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
468 				GFP_KERNEL);
469 		if (!priv->urb->transfer_buffer) {
470 			usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
471 			return;
472 		}
473 	}
474 
475 	/* copy urb setup packet */
476 	priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8,
477 					  GFP_KERNEL);
478 	if (!priv->urb->setup_packet) {
479 		dev_err(&udev->dev, "allocate setup_packet\n");
480 		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
481 		return;
482 	}
483 
484 	/* set other members from the base header of pdu */
485 	priv->urb->context                = (void *) priv;
486 	priv->urb->dev                    = udev;
487 	priv->urb->pipe                   = pipe;
488 	priv->urb->complete               = stub_complete;
489 
490 	usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0);
491 
492 
493 	if (usbip_recv_xbuff(ud, priv->urb) < 0)
494 		return;
495 
496 	if (usbip_recv_iso(ud, priv->urb) < 0)
497 		return;
498 
499 	/* no need to submit an intercepted request, but harmless? */
500 	tweak_special_requests(priv->urb);
501 
502 	masking_bogus_flags(priv->urb);
503 	/* urb is now ready to submit */
504 	ret = usb_submit_urb(priv->urb, GFP_KERNEL);
505 
506 	if (ret == 0)
507 		usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
508 				  pdu->base.seqnum);
509 	else {
510 		dev_err(&udev->dev, "submit_urb error, %d\n", ret);
511 		usbip_dump_header(pdu);
512 		usbip_dump_urb(priv->urb);
513 
514 		/*
515 		 * Pessimistic.
516 		 * This connection will be discarded.
517 		 */
518 		usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
519 	}
520 
521 	usbip_dbg_stub_rx("Leave\n");
522 }
523 
524 /* recv a pdu */
525 static void stub_rx_pdu(struct usbip_device *ud)
526 {
527 	int ret;
528 	struct usbip_header pdu;
529 	struct stub_device *sdev = container_of(ud, struct stub_device, ud);
530 	struct device *dev = &sdev->udev->dev;
531 
532 	usbip_dbg_stub_rx("Enter\n");
533 
534 	memset(&pdu, 0, sizeof(pdu));
535 
536 	/* receive a pdu header */
537 	ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu));
538 	if (ret != sizeof(pdu)) {
539 		dev_err(dev, "recv a header, %d\n", ret);
540 		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
541 		return;
542 	}
543 
544 	usbip_header_correct_endian(&pdu, 0);
545 
546 	if (usbip_dbg_flag_stub_rx)
547 		usbip_dump_header(&pdu);
548 
549 	if (!valid_request(sdev, &pdu)) {
550 		dev_err(dev, "recv invalid request\n");
551 		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
552 		return;
553 	}
554 
555 	switch (pdu.base.command) {
556 	case USBIP_CMD_UNLINK:
557 		stub_recv_cmd_unlink(sdev, &pdu);
558 		break;
559 
560 	case USBIP_CMD_SUBMIT:
561 		stub_recv_cmd_submit(sdev, &pdu);
562 		break;
563 
564 	default:
565 		/* NOTREACHED */
566 		dev_err(dev, "unknown pdu\n");
567 		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
568 		break;
569 	}
570 }
571 
572 int stub_rx_loop(void *data)
573 {
574 	struct usbip_device *ud = data;
575 
576 	while (!kthread_should_stop()) {
577 		if (usbip_event_happened(ud))
578 			break;
579 
580 		stub_rx_pdu(ud);
581 	}
582 
583 	return 0;
584 }
585