xref: /openbmc/linux/drivers/usb/usbip/stub_rx.c (revision 44ecda71)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2003-2008 Takahiro Hirofuchi
4  */
5 
6 #include <asm/byteorder.h>
7 #include <linux/kthread.h>
8 #include <linux/usb.h>
9 #include <linux/usb/hcd.h>
10 #include <linux/scatterlist.h>
11 
12 #include "usbip_common.h"
13 #include "stub.h"
14 
15 static int is_clear_halt_cmd(struct urb *urb)
16 {
17 	struct usb_ctrlrequest *req;
18 
19 	req = (struct usb_ctrlrequest *) urb->setup_packet;
20 
21 	return (req->bRequest == USB_REQ_CLEAR_FEATURE) &&
22 	       (req->bRequestType == USB_RECIP_ENDPOINT) &&
23 	       (req->wValue == USB_ENDPOINT_HALT);
24 }
25 
26 static int is_set_interface_cmd(struct urb *urb)
27 {
28 	struct usb_ctrlrequest *req;
29 
30 	req = (struct usb_ctrlrequest *) urb->setup_packet;
31 
32 	return (req->bRequest == USB_REQ_SET_INTERFACE) &&
33 		(req->bRequestType == USB_RECIP_INTERFACE);
34 }
35 
36 static int is_set_configuration_cmd(struct urb *urb)
37 {
38 	struct usb_ctrlrequest *req;
39 
40 	req = (struct usb_ctrlrequest *) urb->setup_packet;
41 
42 	return (req->bRequest == USB_REQ_SET_CONFIGURATION) &&
43 		(req->bRequestType == USB_RECIP_DEVICE);
44 }
45 
46 static int is_reset_device_cmd(struct urb *urb)
47 {
48 	struct usb_ctrlrequest *req;
49 	__u16 value;
50 	__u16 index;
51 
52 	req = (struct usb_ctrlrequest *) urb->setup_packet;
53 	value = le16_to_cpu(req->wValue);
54 	index = le16_to_cpu(req->wIndex);
55 
56 	if ((req->bRequest == USB_REQ_SET_FEATURE) &&
57 	    (req->bRequestType == USB_RT_PORT) &&
58 	    (value == USB_PORT_FEAT_RESET)) {
59 		usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index);
60 		return 1;
61 	} else
62 		return 0;
63 }
64 
65 static int tweak_clear_halt_cmd(struct urb *urb)
66 {
67 	struct usb_ctrlrequest *req;
68 	int target_endp;
69 	int target_dir;
70 	int target_pipe;
71 	int ret;
72 
73 	req = (struct usb_ctrlrequest *) urb->setup_packet;
74 
75 	/*
76 	 * The stalled endpoint is specified in the wIndex value. The endpoint
77 	 * of the urb is the target of this clear_halt request (i.e., control
78 	 * endpoint).
79 	 */
80 	target_endp = le16_to_cpu(req->wIndex) & 0x000f;
81 
82 	/* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80.  */
83 	target_dir = le16_to_cpu(req->wIndex) & 0x0080;
84 
85 	if (target_dir)
86 		target_pipe = usb_rcvctrlpipe(urb->dev, target_endp);
87 	else
88 		target_pipe = usb_sndctrlpipe(urb->dev, target_endp);
89 
90 	ret = usb_clear_halt(urb->dev, target_pipe);
91 	if (ret < 0)
92 		dev_err(&urb->dev->dev,
93 			"usb_clear_halt error: devnum %d endp %d ret %d\n",
94 			urb->dev->devnum, target_endp, ret);
95 	else
96 		dev_info(&urb->dev->dev,
97 			 "usb_clear_halt done: devnum %d endp %d\n",
98 			 urb->dev->devnum, target_endp);
99 
100 	return ret;
101 }
102 
103 static int tweak_set_interface_cmd(struct urb *urb)
104 {
105 	struct usb_ctrlrequest *req;
106 	__u16 alternate;
107 	__u16 interface;
108 	int ret;
109 
110 	req = (struct usb_ctrlrequest *) urb->setup_packet;
111 	alternate = le16_to_cpu(req->wValue);
112 	interface = le16_to_cpu(req->wIndex);
113 
114 	usbip_dbg_stub_rx("set_interface: inf %u alt %u\n",
115 			  interface, alternate);
116 
117 	ret = usb_set_interface(urb->dev, interface, alternate);
118 	if (ret < 0)
119 		dev_err(&urb->dev->dev,
120 			"usb_set_interface error: inf %u alt %u ret %d\n",
121 			interface, alternate, ret);
122 	else
123 		dev_info(&urb->dev->dev,
124 			"usb_set_interface done: inf %u alt %u\n",
125 			interface, alternate);
126 
127 	return ret;
128 }
129 
130 static int tweak_set_configuration_cmd(struct urb *urb)
131 {
132 	struct stub_priv *priv = (struct stub_priv *) urb->context;
133 	struct stub_device *sdev = priv->sdev;
134 	struct usb_ctrlrequest *req;
135 	__u16 config;
136 	int err;
137 
138 	req = (struct usb_ctrlrequest *) urb->setup_packet;
139 	config = le16_to_cpu(req->wValue);
140 
141 	usb_lock_device(sdev->udev);
142 	err = usb_set_configuration(sdev->udev, config);
143 	usb_unlock_device(sdev->udev);
144 	if (err && err != -ENODEV)
145 		dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n",
146 			config, err);
147 	return 0;
148 }
149 
150 static int tweak_reset_device_cmd(struct urb *urb)
151 {
152 	struct stub_priv *priv = (struct stub_priv *) urb->context;
153 	struct stub_device *sdev = priv->sdev;
154 
155 	dev_info(&urb->dev->dev, "usb_queue_reset_device\n");
156 
157 	if (usb_lock_device_for_reset(sdev->udev, NULL) < 0) {
158 		dev_err(&urb->dev->dev, "could not obtain lock to reset device\n");
159 		return 0;
160 	}
161 	usb_reset_device(sdev->udev);
162 	usb_unlock_device(sdev->udev);
163 
164 	return 0;
165 }
166 
167 /*
168  * clear_halt, set_interface, and set_configuration require special tricks.
169  */
170 static void tweak_special_requests(struct urb *urb)
171 {
172 	if (!urb || !urb->setup_packet)
173 		return;
174 
175 	if (usb_pipetype(urb->pipe) != PIPE_CONTROL)
176 		return;
177 
178 	if (is_clear_halt_cmd(urb))
179 		/* tweak clear_halt */
180 		 tweak_clear_halt_cmd(urb);
181 
182 	else if (is_set_interface_cmd(urb))
183 		/* tweak set_interface */
184 		tweak_set_interface_cmd(urb);
185 
186 	else if (is_set_configuration_cmd(urb))
187 		/* tweak set_configuration */
188 		tweak_set_configuration_cmd(urb);
189 
190 	else if (is_reset_device_cmd(urb))
191 		tweak_reset_device_cmd(urb);
192 	else
193 		usbip_dbg_stub_rx("no need to tweak\n");
194 }
195 
196 /*
197  * stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb().
198  * By unlinking the urb asynchronously, stub_rx can continuously
199  * process coming urbs.  Even if the urb is unlinked, its completion
200  * handler will be called and stub_tx will send a return pdu.
201  *
202  * See also comments about unlinking strategy in vhci_hcd.c.
203  */
204 static int stub_recv_cmd_unlink(struct stub_device *sdev,
205 				struct usbip_header *pdu)
206 {
207 	int ret, i;
208 	unsigned long flags;
209 	struct stub_priv *priv;
210 
211 	spin_lock_irqsave(&sdev->priv_lock, flags);
212 
213 	list_for_each_entry(priv, &sdev->priv_init, list) {
214 		if (priv->seqnum != pdu->u.cmd_unlink.seqnum)
215 			continue;
216 
217 		/*
218 		 * This matched urb is not completed yet (i.e., be in
219 		 * flight in usb hcd hardware/driver). Now we are
220 		 * cancelling it. The unlinking flag means that we are
221 		 * now not going to return the normal result pdu of a
222 		 * submission request, but going to return a result pdu
223 		 * of the unlink request.
224 		 */
225 		priv->unlinking = 1;
226 
227 		/*
228 		 * In the case that unlinking flag is on, prev->seqnum
229 		 * is changed from the seqnum of the cancelling urb to
230 		 * the seqnum of the unlink request. This will be used
231 		 * to make the result pdu of the unlink request.
232 		 */
233 		priv->seqnum = pdu->base.seqnum;
234 
235 		spin_unlock_irqrestore(&sdev->priv_lock, flags);
236 
237 		/*
238 		 * usb_unlink_urb() is now out of spinlocking to avoid
239 		 * spinlock recursion since stub_complete() is
240 		 * sometimes called in this context but not in the
241 		 * interrupt context.  If stub_complete() is executed
242 		 * before we call usb_unlink_urb(), usb_unlink_urb()
243 		 * will return an error value. In this case, stub_tx
244 		 * will return the result pdu of this unlink request
245 		 * though submission is completed and actual unlinking
246 		 * is not executed. OK?
247 		 */
248 		/* In the above case, urb->status is not -ECONNRESET,
249 		 * so a driver in a client host will know the failure
250 		 * of the unlink request ?
251 		 */
252 		for (i = priv->completed_urbs; i < priv->num_urbs; i++) {
253 			ret = usb_unlink_urb(priv->urbs[i]);
254 			if (ret != -EINPROGRESS)
255 				dev_err(&priv->urbs[i]->dev->dev,
256 					"failed to unlink %d/%d urb of seqnum %lu, ret %d\n",
257 					i + 1, priv->num_urbs,
258 					priv->seqnum, ret);
259 		}
260 		return 0;
261 	}
262 
263 	usbip_dbg_stub_rx("seqnum %d is not pending\n",
264 			  pdu->u.cmd_unlink.seqnum);
265 
266 	/*
267 	 * The urb of the unlink target is not found in priv_init queue. It was
268 	 * already completed and its results is/was going to be sent by a
269 	 * CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only
270 	 * return the completeness of this unlink request to vhci_hcd.
271 	 */
272 	stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0);
273 
274 	spin_unlock_irqrestore(&sdev->priv_lock, flags);
275 
276 	return 0;
277 }
278 
279 static int valid_request(struct stub_device *sdev, struct usbip_header *pdu)
280 {
281 	struct usbip_device *ud = &sdev->ud;
282 	int valid = 0;
283 
284 	if (pdu->base.devid == sdev->devid) {
285 		spin_lock_irq(&ud->lock);
286 		if (ud->status == SDEV_ST_USED) {
287 			/* A request is valid. */
288 			valid = 1;
289 		}
290 		spin_unlock_irq(&ud->lock);
291 	}
292 
293 	return valid;
294 }
295 
296 static struct stub_priv *stub_priv_alloc(struct stub_device *sdev,
297 					 struct usbip_header *pdu)
298 {
299 	struct stub_priv *priv;
300 	struct usbip_device *ud = &sdev->ud;
301 	unsigned long flags;
302 
303 	spin_lock_irqsave(&sdev->priv_lock, flags);
304 
305 	priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC);
306 	if (!priv) {
307 		dev_err(&sdev->udev->dev, "alloc stub_priv\n");
308 		spin_unlock_irqrestore(&sdev->priv_lock, flags);
309 		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
310 		return NULL;
311 	}
312 
313 	priv->seqnum = pdu->base.seqnum;
314 	priv->sdev = sdev;
315 
316 	/*
317 	 * After a stub_priv is linked to a list_head,
318 	 * our error handler can free allocated data.
319 	 */
320 	list_add_tail(&priv->list, &sdev->priv_init);
321 
322 	spin_unlock_irqrestore(&sdev->priv_lock, flags);
323 
324 	return priv;
325 }
326 
327 static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu)
328 {
329 	struct usb_device *udev = sdev->udev;
330 	struct usb_host_endpoint *ep;
331 	struct usb_endpoint_descriptor *epd = NULL;
332 	int epnum = pdu->base.ep;
333 	int dir = pdu->base.direction;
334 
335 	if (epnum < 0 || epnum > 15)
336 		goto err_ret;
337 
338 	if (dir == USBIP_DIR_IN)
339 		ep = udev->ep_in[epnum & 0x7f];
340 	else
341 		ep = udev->ep_out[epnum & 0x7f];
342 	if (!ep)
343 		goto err_ret;
344 
345 	epd = &ep->desc;
346 
347 	if (usb_endpoint_xfer_control(epd)) {
348 		if (dir == USBIP_DIR_OUT)
349 			return usb_sndctrlpipe(udev, epnum);
350 		else
351 			return usb_rcvctrlpipe(udev, epnum);
352 	}
353 
354 	if (usb_endpoint_xfer_bulk(epd)) {
355 		if (dir == USBIP_DIR_OUT)
356 			return usb_sndbulkpipe(udev, epnum);
357 		else
358 			return usb_rcvbulkpipe(udev, epnum);
359 	}
360 
361 	if (usb_endpoint_xfer_int(epd)) {
362 		if (dir == USBIP_DIR_OUT)
363 			return usb_sndintpipe(udev, epnum);
364 		else
365 			return usb_rcvintpipe(udev, epnum);
366 	}
367 
368 	if (usb_endpoint_xfer_isoc(epd)) {
369 		/* validate number of packets */
370 		if (pdu->u.cmd_submit.number_of_packets < 0 ||
371 		    pdu->u.cmd_submit.number_of_packets >
372 		    USBIP_MAX_ISO_PACKETS) {
373 			dev_err(&sdev->udev->dev,
374 				"CMD_SUBMIT: isoc invalid num packets %d\n",
375 				pdu->u.cmd_submit.number_of_packets);
376 			return -1;
377 		}
378 		if (dir == USBIP_DIR_OUT)
379 			return usb_sndisocpipe(udev, epnum);
380 		else
381 			return usb_rcvisocpipe(udev, epnum);
382 	}
383 
384 err_ret:
385 	/* NOT REACHED */
386 	dev_err(&sdev->udev->dev, "CMD_SUBMIT: invalid epnum %d\n", epnum);
387 	return -1;
388 }
389 
390 static void masking_bogus_flags(struct urb *urb)
391 {
392 	int				xfertype;
393 	struct usb_device		*dev;
394 	struct usb_host_endpoint	*ep;
395 	int				is_out;
396 	unsigned int	allowed;
397 
398 	if (!urb || urb->hcpriv || !urb->complete)
399 		return;
400 	dev = urb->dev;
401 	if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
402 		return;
403 
404 	ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
405 		[usb_pipeendpoint(urb->pipe)];
406 	if (!ep)
407 		return;
408 
409 	xfertype = usb_endpoint_type(&ep->desc);
410 	if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
411 		struct usb_ctrlrequest *setup =
412 			(struct usb_ctrlrequest *) urb->setup_packet;
413 
414 		if (!setup)
415 			return;
416 		is_out = !(setup->bRequestType & USB_DIR_IN) ||
417 			!setup->wLength;
418 	} else {
419 		is_out = usb_endpoint_dir_out(&ep->desc);
420 	}
421 
422 	/* enforce simple/standard policy */
423 	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT |
424 		   URB_DIR_MASK | URB_FREE_BUFFER);
425 	switch (xfertype) {
426 	case USB_ENDPOINT_XFER_BULK:
427 		if (is_out)
428 			allowed |= URB_ZERO_PACKET;
429 		fallthrough;
430 	default:			/* all non-iso endpoints */
431 		if (!is_out)
432 			allowed |= URB_SHORT_NOT_OK;
433 		break;
434 	case USB_ENDPOINT_XFER_ISOC:
435 		allowed |= URB_ISO_ASAP;
436 		break;
437 	}
438 	urb->transfer_flags &= allowed;
439 }
440 
441 static int stub_recv_xbuff(struct usbip_device *ud, struct stub_priv *priv)
442 {
443 	int ret;
444 	int i;
445 
446 	for (i = 0; i < priv->num_urbs; i++) {
447 		ret = usbip_recv_xbuff(ud, priv->urbs[i]);
448 		if (ret < 0)
449 			break;
450 	}
451 
452 	return ret;
453 }
454 
455 static void stub_recv_cmd_submit(struct stub_device *sdev,
456 				 struct usbip_header *pdu)
457 {
458 	struct stub_priv *priv;
459 	struct usbip_device *ud = &sdev->ud;
460 	struct usb_device *udev = sdev->udev;
461 	struct scatterlist *sgl = NULL, *sg;
462 	void *buffer = NULL;
463 	unsigned long long buf_len;
464 	int nents;
465 	int num_urbs = 1;
466 	int pipe = get_pipe(sdev, pdu);
467 	int use_sg = pdu->u.cmd_submit.transfer_flags & USBIP_URB_DMA_MAP_SG;
468 	int support_sg = 1;
469 	int np = 0;
470 	int ret, i;
471 
472 	if (pipe == -1)
473 		return;
474 
475 	/*
476 	 * Smatch reported the error case where use_sg is true and buf_len is 0.
477 	 * In this case, It adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be
478 	 * released by stub event handler and connection will be shut down.
479 	 */
480 	priv = stub_priv_alloc(sdev, pdu);
481 	if (!priv)
482 		return;
483 
484 	buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
485 
486 	if (use_sg && !buf_len) {
487 		dev_err(&udev->dev, "sg buffer with zero length\n");
488 		goto err_malloc;
489 	}
490 
491 	/* allocate urb transfer buffer, if needed */
492 	if (buf_len) {
493 		if (use_sg) {
494 			sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
495 			if (!sgl)
496 				goto err_malloc;
497 
498 			/* Check if the server's HCD supports SG */
499 			if (!udev->bus->sg_tablesize) {
500 				/*
501 				 * If the server's HCD doesn't support SG, break
502 				 * a single SG request into several URBs and map
503 				 * each SG list entry to corresponding URB
504 				 * buffer. The previously allocated SG list is
505 				 * stored in priv->sgl (If the server's HCD
506 				 * support SG, SG list is stored only in
507 				 * urb->sg) and it is used as an indicator that
508 				 * the server split single SG request into
509 				 * several URBs. Later, priv->sgl is used by
510 				 * stub_complete() and stub_send_ret_submit() to
511 				 * reassemble the divied URBs.
512 				 */
513 				support_sg = 0;
514 				num_urbs = nents;
515 				priv->completed_urbs = 0;
516 				pdu->u.cmd_submit.transfer_flags &=
517 								~USBIP_URB_DMA_MAP_SG;
518 			}
519 		} else {
520 			buffer = kzalloc(buf_len, GFP_KERNEL);
521 			if (!buffer)
522 				goto err_malloc;
523 		}
524 	}
525 
526 	/* allocate urb array */
527 	priv->num_urbs = num_urbs;
528 	priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL);
529 	if (!priv->urbs)
530 		goto err_urbs;
531 
532 	/* setup a urb */
533 	if (support_sg) {
534 		if (usb_pipeisoc(pipe))
535 			np = pdu->u.cmd_submit.number_of_packets;
536 
537 		priv->urbs[0] = usb_alloc_urb(np, GFP_KERNEL);
538 		if (!priv->urbs[0])
539 			goto err_urb;
540 
541 		if (buf_len) {
542 			if (use_sg) {
543 				priv->urbs[0]->sg = sgl;
544 				priv->urbs[0]->num_sgs = nents;
545 				priv->urbs[0]->transfer_buffer = NULL;
546 			} else {
547 				priv->urbs[0]->transfer_buffer = buffer;
548 			}
549 		}
550 
551 		/* copy urb setup packet */
552 		priv->urbs[0]->setup_packet = kmemdup(&pdu->u.cmd_submit.setup,
553 					8, GFP_KERNEL);
554 		if (!priv->urbs[0]->setup_packet) {
555 			usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
556 			return;
557 		}
558 
559 		usbip_pack_pdu(pdu, priv->urbs[0], USBIP_CMD_SUBMIT, 0);
560 	} else {
561 		for_each_sg(sgl, sg, nents, i) {
562 			priv->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
563 			/* The URBs which is previously allocated will be freed
564 			 * in stub_device_cleanup_urbs() if error occurs.
565 			 */
566 			if (!priv->urbs[i])
567 				goto err_urb;
568 
569 			usbip_pack_pdu(pdu, priv->urbs[i], USBIP_CMD_SUBMIT, 0);
570 			priv->urbs[i]->transfer_buffer = sg_virt(sg);
571 			priv->urbs[i]->transfer_buffer_length = sg->length;
572 		}
573 		priv->sgl = sgl;
574 	}
575 
576 	for (i = 0; i < num_urbs; i++) {
577 		/* set other members from the base header of pdu */
578 		priv->urbs[i]->context = (void *) priv;
579 		priv->urbs[i]->dev = udev;
580 		priv->urbs[i]->pipe = pipe;
581 		priv->urbs[i]->complete = stub_complete;
582 
583 		/* no need to submit an intercepted request, but harmless? */
584 		tweak_special_requests(priv->urbs[i]);
585 
586 		masking_bogus_flags(priv->urbs[i]);
587 	}
588 
589 	if (stub_recv_xbuff(ud, priv) < 0)
590 		return;
591 
592 	if (usbip_recv_iso(ud, priv->urbs[0]) < 0)
593 		return;
594 
595 	/* urb is now ready to submit */
596 	for (i = 0; i < priv->num_urbs; i++) {
597 		ret = usb_submit_urb(priv->urbs[i], GFP_KERNEL);
598 
599 		if (ret == 0)
600 			usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
601 					pdu->base.seqnum);
602 		else {
603 			dev_err(&udev->dev, "submit_urb error, %d\n", ret);
604 			usbip_dump_header(pdu);
605 			usbip_dump_urb(priv->urbs[i]);
606 
607 			/*
608 			 * Pessimistic.
609 			 * This connection will be discarded.
610 			 */
611 			usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
612 			break;
613 		}
614 	}
615 
616 	usbip_dbg_stub_rx("Leave\n");
617 	return;
618 
619 err_urb:
620 	kfree(priv->urbs);
621 err_urbs:
622 	kfree(buffer);
623 	sgl_free(sgl);
624 err_malloc:
625 	usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
626 }
627 
628 /* recv a pdu */
629 static void stub_rx_pdu(struct usbip_device *ud)
630 {
631 	int ret;
632 	struct usbip_header pdu;
633 	struct stub_device *sdev = container_of(ud, struct stub_device, ud);
634 	struct device *dev = &sdev->udev->dev;
635 
636 	usbip_dbg_stub_rx("Enter\n");
637 
638 	memset(&pdu, 0, sizeof(pdu));
639 
640 	/* receive a pdu header */
641 	ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu));
642 	if (ret != sizeof(pdu)) {
643 		dev_err(dev, "recv a header, %d\n", ret);
644 		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
645 		return;
646 	}
647 
648 	usbip_header_correct_endian(&pdu, 0);
649 
650 	if (usbip_dbg_flag_stub_rx)
651 		usbip_dump_header(&pdu);
652 
653 	if (!valid_request(sdev, &pdu)) {
654 		dev_err(dev, "recv invalid request\n");
655 		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
656 		return;
657 	}
658 
659 	switch (pdu.base.command) {
660 	case USBIP_CMD_UNLINK:
661 		stub_recv_cmd_unlink(sdev, &pdu);
662 		break;
663 
664 	case USBIP_CMD_SUBMIT:
665 		stub_recv_cmd_submit(sdev, &pdu);
666 		break;
667 
668 	default:
669 		/* NOTREACHED */
670 		dev_err(dev, "unknown pdu\n");
671 		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
672 		break;
673 	}
674 }
675 
676 int stub_rx_loop(void *data)
677 {
678 	struct usbip_device *ud = data;
679 
680 	while (!kthread_should_stop()) {
681 		if (usbip_event_happened(ud))
682 			break;
683 
684 		stub_rx_pdu(ud);
685 	}
686 
687 	return 0;
688 }
689