xref: /openbmc/linux/drivers/usb/typec/tcpm/fusb302.c (revision 31e67366)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2016-2017 Google, Inc
4  *
5  * Fairchild FUSB302 Type-C Chip Driver
6  */
7 
8 #include <linux/debugfs.h>
9 #include <linux/delay.h>
10 #include <linux/errno.h>
11 #include <linux/extcon.h>
12 #include <linux/gpio/consumer.h>
13 #include <linux/i2c.h>
14 #include <linux/interrupt.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/mutex.h>
18 #include <linux/of_device.h>
19 #include <linux/pinctrl/consumer.h>
20 #include <linux/proc_fs.h>
21 #include <linux/regulator/consumer.h>
22 #include <linux/sched/clock.h>
23 #include <linux/seq_file.h>
24 #include <linux/slab.h>
25 #include <linux/spinlock.h>
26 #include <linux/string.h>
27 #include <linux/types.h>
28 #include <linux/usb.h>
29 #include <linux/usb/typec.h>
30 #include <linux/usb/tcpm.h>
31 #include <linux/usb/pd.h>
32 #include <linux/workqueue.h>
33 
34 #include "fusb302_reg.h"
35 
36 /*
37  * When the device is SNK, BC_LVL interrupt is used to monitor cc pins
38  * for the current capability offered by the SRC. As FUSB302 chip fires
39  * the BC_LVL interrupt on PD signalings, cc lvl should be handled after
40  * a delay to avoid measuring on PD activities. The delay is slightly
41  * longer than PD_T_PD_DEBPUNCE (10-20ms).
42  */
43 #define T_BC_LVL_DEBOUNCE_DELAY_MS 30
44 
45 enum toggling_mode {
46 	TOGGLING_MODE_OFF,
47 	TOGGLING_MODE_DRP,
48 	TOGGLING_MODE_SNK,
49 	TOGGLING_MODE_SRC,
50 };
51 
52 enum src_current_status {
53 	SRC_CURRENT_DEFAULT,
54 	SRC_CURRENT_MEDIUM,
55 	SRC_CURRENT_HIGH,
56 };
57 
58 static const u8 ra_mda_value[] = {
59 	[SRC_CURRENT_DEFAULT] = 4,	/* 210mV */
60 	[SRC_CURRENT_MEDIUM] = 9,	/* 420mV */
61 	[SRC_CURRENT_HIGH] = 18,	/* 798mV */
62 };
63 
64 static const u8 rd_mda_value[] = {
65 	[SRC_CURRENT_DEFAULT] = 38,	/* 1638mV */
66 	[SRC_CURRENT_MEDIUM] = 38,	/* 1638mV */
67 	[SRC_CURRENT_HIGH] = 61,	/* 2604mV */
68 };
69 
70 #define LOG_BUFFER_ENTRIES	1024
71 #define LOG_BUFFER_ENTRY_SIZE	128
72 
73 struct fusb302_chip {
74 	struct device *dev;
75 	struct i2c_client *i2c_client;
76 	struct tcpm_port *tcpm_port;
77 	struct tcpc_dev tcpc_dev;
78 
79 	struct regulator *vbus;
80 
81 	spinlock_t irq_lock;
82 	struct work_struct irq_work;
83 	bool irq_suspended;
84 	bool irq_while_suspended;
85 	struct gpio_desc *gpio_int_n;
86 	int gpio_int_n_irq;
87 	struct extcon_dev *extcon;
88 
89 	struct workqueue_struct *wq;
90 	struct delayed_work bc_lvl_handler;
91 
92 	/* lock for sharing chip states */
93 	struct mutex lock;
94 
95 	/* chip status */
96 	enum toggling_mode toggling_mode;
97 	enum src_current_status src_current_status;
98 	bool intr_togdone;
99 	bool intr_bc_lvl;
100 	bool intr_comp_chng;
101 
102 	/* port status */
103 	bool vconn_on;
104 	bool vbus_on;
105 	bool charge_on;
106 	bool vbus_present;
107 	enum typec_cc_polarity cc_polarity;
108 	enum typec_cc_status cc1;
109 	enum typec_cc_status cc2;
110 	u32 snk_pdo[PDO_MAX_OBJECTS];
111 
112 #ifdef CONFIG_DEBUG_FS
113 	struct dentry *dentry;
114 	/* lock for log buffer access */
115 	struct mutex logbuffer_lock;
116 	int logbuffer_head;
117 	int logbuffer_tail;
118 	u8 *logbuffer[LOG_BUFFER_ENTRIES];
119 #endif
120 };
121 
122 /*
123  * Logging
124  */
125 
126 #ifdef CONFIG_DEBUG_FS
127 static bool fusb302_log_full(struct fusb302_chip *chip)
128 {
129 	return chip->logbuffer_tail ==
130 		(chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
131 }
132 
133 __printf(2, 0)
134 static void _fusb302_log(struct fusb302_chip *chip, const char *fmt,
135 			 va_list args)
136 {
137 	char tmpbuffer[LOG_BUFFER_ENTRY_SIZE];
138 	u64 ts_nsec = local_clock();
139 	unsigned long rem_nsec;
140 
141 	if (!chip->logbuffer[chip->logbuffer_head]) {
142 		chip->logbuffer[chip->logbuffer_head] =
143 				kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL);
144 		if (!chip->logbuffer[chip->logbuffer_head])
145 			return;
146 	}
147 
148 	vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args);
149 
150 	mutex_lock(&chip->logbuffer_lock);
151 
152 	if (fusb302_log_full(chip)) {
153 		chip->logbuffer_head = max(chip->logbuffer_head - 1, 0);
154 		strlcpy(tmpbuffer, "overflow", sizeof(tmpbuffer));
155 	}
156 
157 	if (chip->logbuffer_head < 0 ||
158 	    chip->logbuffer_head >= LOG_BUFFER_ENTRIES) {
159 		dev_warn(chip->dev,
160 			 "Bad log buffer index %d\n", chip->logbuffer_head);
161 		goto abort;
162 	}
163 
164 	if (!chip->logbuffer[chip->logbuffer_head]) {
165 		dev_warn(chip->dev,
166 			 "Log buffer index %d is NULL\n", chip->logbuffer_head);
167 		goto abort;
168 	}
169 
170 	rem_nsec = do_div(ts_nsec, 1000000000);
171 	scnprintf(chip->logbuffer[chip->logbuffer_head],
172 		  LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s",
173 		  (unsigned long)ts_nsec, rem_nsec / 1000,
174 		  tmpbuffer);
175 	chip->logbuffer_head = (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
176 
177 abort:
178 	mutex_unlock(&chip->logbuffer_lock);
179 }
180 
181 __printf(2, 3)
182 static void fusb302_log(struct fusb302_chip *chip, const char *fmt, ...)
183 {
184 	va_list args;
185 
186 	va_start(args, fmt);
187 	_fusb302_log(chip, fmt, args);
188 	va_end(args);
189 }
190 
191 static int fusb302_debug_show(struct seq_file *s, void *v)
192 {
193 	struct fusb302_chip *chip = (struct fusb302_chip *)s->private;
194 	int tail;
195 
196 	mutex_lock(&chip->logbuffer_lock);
197 	tail = chip->logbuffer_tail;
198 	while (tail != chip->logbuffer_head) {
199 		seq_printf(s, "%s\n", chip->logbuffer[tail]);
200 		tail = (tail + 1) % LOG_BUFFER_ENTRIES;
201 	}
202 	if (!seq_has_overflowed(s))
203 		chip->logbuffer_tail = tail;
204 	mutex_unlock(&chip->logbuffer_lock);
205 
206 	return 0;
207 }
208 DEFINE_SHOW_ATTRIBUTE(fusb302_debug);
209 
210 static void fusb302_debugfs_init(struct fusb302_chip *chip)
211 {
212 	char name[NAME_MAX];
213 
214 	mutex_init(&chip->logbuffer_lock);
215 	snprintf(name, NAME_MAX, "fusb302-%s", dev_name(chip->dev));
216 	chip->dentry = debugfs_create_file(name, S_IFREG | 0444, usb_debug_root,
217 					   chip, &fusb302_debug_fops);
218 }
219 
220 static void fusb302_debugfs_exit(struct fusb302_chip *chip)
221 {
222 	debugfs_remove(chip->dentry);
223 }
224 
225 #else
226 
227 static void fusb302_log(const struct fusb302_chip *chip,
228 			const char *fmt, ...) { }
229 static void fusb302_debugfs_init(const struct fusb302_chip *chip) { }
230 static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { }
231 
232 #endif
233 
234 static int fusb302_i2c_write(struct fusb302_chip *chip,
235 			     u8 address, u8 data)
236 {
237 	int ret = 0;
238 
239 	ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data);
240 	if (ret < 0)
241 		fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d",
242 			    data, address, ret);
243 
244 	return ret;
245 }
246 
247 static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address,
248 				   u8 length, const u8 *data)
249 {
250 	int ret = 0;
251 
252 	if (length <= 0)
253 		return ret;
254 
255 	ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address,
256 					     length, data);
257 	if (ret < 0)
258 		fusb302_log(chip, "cannot block write 0x%02x, len=%d, ret=%d",
259 			    address, length, ret);
260 
261 	return ret;
262 }
263 
264 static int fusb302_i2c_read(struct fusb302_chip *chip,
265 			    u8 address, u8 *data)
266 {
267 	int ret = 0;
268 
269 	ret = i2c_smbus_read_byte_data(chip->i2c_client, address);
270 	*data = (u8)ret;
271 	if (ret < 0)
272 		fusb302_log(chip, "cannot read %02x, ret=%d", address, ret);
273 
274 	return ret;
275 }
276 
277 static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address,
278 				  u8 length, u8 *data)
279 {
280 	int ret = 0;
281 
282 	if (length <= 0)
283 		return ret;
284 
285 	ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address,
286 					    length, data);
287 	if (ret < 0) {
288 		fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d",
289 			    address, length, ret);
290 		goto done;
291 	}
292 	if (ret != length) {
293 		fusb302_log(chip, "only read %d/%d bytes from 0x%02x",
294 			    ret, length, address);
295 		ret = -EIO;
296 	}
297 
298 done:
299 	return ret;
300 }
301 
302 static int fusb302_i2c_mask_write(struct fusb302_chip *chip, u8 address,
303 				  u8 mask, u8 value)
304 {
305 	int ret = 0;
306 	u8 data;
307 
308 	ret = fusb302_i2c_read(chip, address, &data);
309 	if (ret < 0)
310 		return ret;
311 	data &= ~mask;
312 	data |= value;
313 	ret = fusb302_i2c_write(chip, address, data);
314 	if (ret < 0)
315 		return ret;
316 
317 	return ret;
318 }
319 
320 static int fusb302_i2c_set_bits(struct fusb302_chip *chip, u8 address,
321 				u8 set_bits)
322 {
323 	return fusb302_i2c_mask_write(chip, address, 0x00, set_bits);
324 }
325 
326 static int fusb302_i2c_clear_bits(struct fusb302_chip *chip, u8 address,
327 				  u8 clear_bits)
328 {
329 	return fusb302_i2c_mask_write(chip, address, clear_bits, 0x00);
330 }
331 
332 static int fusb302_sw_reset(struct fusb302_chip *chip)
333 {
334 	int ret = 0;
335 
336 	ret = fusb302_i2c_write(chip, FUSB_REG_RESET,
337 				FUSB_REG_RESET_SW_RESET);
338 	if (ret < 0)
339 		fusb302_log(chip, "cannot sw reset the chip, ret=%d", ret);
340 	else
341 		fusb302_log(chip, "sw reset");
342 
343 	return ret;
344 }
345 
346 static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip, u8 retry_count)
347 {
348 	int ret = 0;
349 
350 	ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, retry_count |
351 				   FUSB_REG_CONTROL3_AUTO_RETRY);
352 
353 	return ret;
354 }
355 
356 /*
357  * initialize interrupt on the chip
358  * - unmasked interrupt: VBUS_OK
359  */
360 static int fusb302_init_interrupt(struct fusb302_chip *chip)
361 {
362 	int ret = 0;
363 
364 	ret = fusb302_i2c_write(chip, FUSB_REG_MASK,
365 				0xFF & ~FUSB_REG_MASK_VBUSOK);
366 	if (ret < 0)
367 		return ret;
368 	ret = fusb302_i2c_write(chip, FUSB_REG_MASKA, 0xFF);
369 	if (ret < 0)
370 		return ret;
371 	ret = fusb302_i2c_write(chip, FUSB_REG_MASKB, 0xFF);
372 	if (ret < 0)
373 		return ret;
374 	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL0,
375 				     FUSB_REG_CONTROL0_INT_MASK);
376 	if (ret < 0)
377 		return ret;
378 
379 	return ret;
380 }
381 
382 static int fusb302_set_power_mode(struct fusb302_chip *chip, u8 power_mode)
383 {
384 	int ret = 0;
385 
386 	ret = fusb302_i2c_write(chip, FUSB_REG_POWER, power_mode);
387 
388 	return ret;
389 }
390 
391 static int tcpm_init(struct tcpc_dev *dev)
392 {
393 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
394 						 tcpc_dev);
395 	int ret = 0;
396 	u8 data;
397 
398 	ret = fusb302_sw_reset(chip);
399 	if (ret < 0)
400 		return ret;
401 	ret = fusb302_enable_tx_auto_retries(chip, FUSB_REG_CONTROL3_N_RETRIES_3);
402 	if (ret < 0)
403 		return ret;
404 	ret = fusb302_init_interrupt(chip);
405 	if (ret < 0)
406 		return ret;
407 	ret = fusb302_set_power_mode(chip, FUSB_REG_POWER_PWR_ALL);
408 	if (ret < 0)
409 		return ret;
410 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data);
411 	if (ret < 0)
412 		return ret;
413 	chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK);
414 	ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data);
415 	if (ret < 0)
416 		return ret;
417 	fusb302_log(chip, "fusb302 device ID: 0x%02x", data);
418 
419 	return ret;
420 }
421 
422 static int tcpm_get_vbus(struct tcpc_dev *dev)
423 {
424 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
425 						 tcpc_dev);
426 	int ret = 0;
427 
428 	mutex_lock(&chip->lock);
429 	ret = chip->vbus_present ? 1 : 0;
430 	mutex_unlock(&chip->lock);
431 
432 	return ret;
433 }
434 
435 static int tcpm_get_current_limit(struct tcpc_dev *dev)
436 {
437 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
438 						 tcpc_dev);
439 	int current_limit = 0;
440 	unsigned long timeout;
441 
442 	if (!chip->extcon)
443 		return 0;
444 
445 	/*
446 	 * USB2 Charger detection may still be in progress when we get here,
447 	 * this can take upto 600ms, wait 800ms max.
448 	 */
449 	timeout = jiffies + msecs_to_jiffies(800);
450 	do {
451 		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_SDP) == 1)
452 			current_limit = 500;
453 
454 		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_CDP) == 1 ||
455 		    extcon_get_state(chip->extcon, EXTCON_CHG_USB_ACA) == 1)
456 			current_limit = 1500;
457 
458 		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_DCP) == 1)
459 			current_limit = 2000;
460 
461 		msleep(50);
462 	} while (current_limit == 0 && time_before(jiffies, timeout));
463 
464 	return current_limit;
465 }
466 
467 static int fusb302_set_src_current(struct fusb302_chip *chip,
468 				   enum src_current_status status)
469 {
470 	int ret = 0;
471 
472 	chip->src_current_status = status;
473 	switch (status) {
474 	case SRC_CURRENT_DEFAULT:
475 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
476 					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
477 					     FUSB_REG_CONTROL0_HOST_CUR_DEF);
478 		break;
479 	case SRC_CURRENT_MEDIUM:
480 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
481 					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
482 					     FUSB_REG_CONTROL0_HOST_CUR_MED);
483 		break;
484 	case SRC_CURRENT_HIGH:
485 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
486 					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
487 					     FUSB_REG_CONTROL0_HOST_CUR_HIGH);
488 		break;
489 	default:
490 		break;
491 	}
492 
493 	return ret;
494 }
495 
496 static int fusb302_set_toggling(struct fusb302_chip *chip,
497 				enum toggling_mode mode)
498 {
499 	int ret = 0;
500 
501 	/* first disable toggling */
502 	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2,
503 				     FUSB_REG_CONTROL2_TOGGLE);
504 	if (ret < 0)
505 		return ret;
506 	/* mask interrupts for SRC or SNK */
507 	ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASK,
508 				   FUSB_REG_MASK_BC_LVL |
509 				   FUSB_REG_MASK_COMP_CHNG);
510 	if (ret < 0)
511 		return ret;
512 	chip->intr_bc_lvl = false;
513 	chip->intr_comp_chng = false;
514 	/* configure toggling mode: none/snk/src/drp */
515 	switch (mode) {
516 	case TOGGLING_MODE_OFF:
517 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
518 					     FUSB_REG_CONTROL2_MODE_MASK,
519 					     FUSB_REG_CONTROL2_MODE_NONE);
520 		if (ret < 0)
521 			return ret;
522 		break;
523 	case TOGGLING_MODE_SNK:
524 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
525 					     FUSB_REG_CONTROL2_MODE_MASK,
526 					     FUSB_REG_CONTROL2_MODE_UFP);
527 		if (ret < 0)
528 			return ret;
529 		break;
530 	case TOGGLING_MODE_SRC:
531 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
532 					     FUSB_REG_CONTROL2_MODE_MASK,
533 					     FUSB_REG_CONTROL2_MODE_DFP);
534 		if (ret < 0)
535 			return ret;
536 		break;
537 	case TOGGLING_MODE_DRP:
538 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
539 					     FUSB_REG_CONTROL2_MODE_MASK,
540 					     FUSB_REG_CONTROL2_MODE_DRP);
541 		if (ret < 0)
542 			return ret;
543 		break;
544 	default:
545 		break;
546 	}
547 
548 	if (mode == TOGGLING_MODE_OFF) {
549 		/* mask TOGDONE interrupt */
550 		ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASKA,
551 					   FUSB_REG_MASKA_TOGDONE);
552 		if (ret < 0)
553 			return ret;
554 		chip->intr_togdone = false;
555 	} else {
556 		/* Datasheet says vconn MUST be off when toggling */
557 		WARN(chip->vconn_on, "Vconn is on during toggle start");
558 		/* unmask TOGDONE interrupt */
559 		ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA,
560 					     FUSB_REG_MASKA_TOGDONE);
561 		if (ret < 0)
562 			return ret;
563 		chip->intr_togdone = true;
564 		/* start toggling */
565 		ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL2,
566 					   FUSB_REG_CONTROL2_TOGGLE);
567 		if (ret < 0)
568 			return ret;
569 		/* during toggling, consider cc as Open */
570 		chip->cc1 = TYPEC_CC_OPEN;
571 		chip->cc2 = TYPEC_CC_OPEN;
572 	}
573 	chip->toggling_mode = mode;
574 
575 	return ret;
576 }
577 
578 static const char * const typec_cc_status_name[] = {
579 	[TYPEC_CC_OPEN]		= "Open",
580 	[TYPEC_CC_RA]		= "Ra",
581 	[TYPEC_CC_RD]		= "Rd",
582 	[TYPEC_CC_RP_DEF]	= "Rp-def",
583 	[TYPEC_CC_RP_1_5]	= "Rp-1.5",
584 	[TYPEC_CC_RP_3_0]	= "Rp-3.0",
585 };
586 
587 static const enum src_current_status cc_src_current[] = {
588 	[TYPEC_CC_OPEN]		= SRC_CURRENT_DEFAULT,
589 	[TYPEC_CC_RA]		= SRC_CURRENT_DEFAULT,
590 	[TYPEC_CC_RD]		= SRC_CURRENT_DEFAULT,
591 	[TYPEC_CC_RP_DEF]	= SRC_CURRENT_DEFAULT,
592 	[TYPEC_CC_RP_1_5]	= SRC_CURRENT_MEDIUM,
593 	[TYPEC_CC_RP_3_0]	= SRC_CURRENT_HIGH,
594 };
595 
596 static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
597 {
598 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
599 						 tcpc_dev);
600 	u8 switches0_mask = FUSB_REG_SWITCHES0_CC1_PU_EN |
601 			    FUSB_REG_SWITCHES0_CC2_PU_EN |
602 			    FUSB_REG_SWITCHES0_CC1_PD_EN |
603 			    FUSB_REG_SWITCHES0_CC2_PD_EN;
604 	u8 rd_mda, switches0_data = 0x00;
605 	int ret = 0;
606 
607 	mutex_lock(&chip->lock);
608 	switch (cc) {
609 	case TYPEC_CC_OPEN:
610 		break;
611 	case TYPEC_CC_RD:
612 		switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
613 				  FUSB_REG_SWITCHES0_CC2_PD_EN;
614 		break;
615 	case TYPEC_CC_RP_DEF:
616 	case TYPEC_CC_RP_1_5:
617 	case TYPEC_CC_RP_3_0:
618 		switches0_data |= (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
619 				  FUSB_REG_SWITCHES0_CC1_PU_EN :
620 				  FUSB_REG_SWITCHES0_CC2_PU_EN;
621 		break;
622 	default:
623 		fusb302_log(chip, "unsupported cc value %s",
624 			    typec_cc_status_name[cc]);
625 		ret = -EINVAL;
626 		goto done;
627 	}
628 
629 	fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]);
630 
631 	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
632 	if (ret < 0) {
633 		fusb302_log(chip, "cannot set toggling mode, ret=%d", ret);
634 		goto done;
635 	}
636 
637 	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
638 				     switches0_mask, switches0_data);
639 	if (ret < 0) {
640 		fusb302_log(chip, "cannot set pull-up/-down, ret = %d", ret);
641 		goto done;
642 	}
643 	/* reset the cc status */
644 	chip->cc1 = TYPEC_CC_OPEN;
645 	chip->cc2 = TYPEC_CC_OPEN;
646 
647 	/* adjust current for SRC */
648 	ret = fusb302_set_src_current(chip, cc_src_current[cc]);
649 	if (ret < 0) {
650 		fusb302_log(chip, "cannot set src current %s, ret=%d",
651 			    typec_cc_status_name[cc], ret);
652 		goto done;
653 	}
654 
655 	/* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */
656 	switch (cc) {
657 	case TYPEC_CC_RP_DEF:
658 	case TYPEC_CC_RP_1_5:
659 	case TYPEC_CC_RP_3_0:
660 		rd_mda = rd_mda_value[cc_src_current[cc]];
661 		ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
662 		if (ret < 0) {
663 			fusb302_log(chip,
664 				    "cannot set SRC measure value, ret=%d",
665 				    ret);
666 			goto done;
667 		}
668 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
669 					     FUSB_REG_MASK_BC_LVL |
670 					     FUSB_REG_MASK_COMP_CHNG,
671 					     FUSB_REG_MASK_COMP_CHNG);
672 		if (ret < 0) {
673 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
674 				    ret);
675 			goto done;
676 		}
677 		chip->intr_comp_chng = true;
678 		break;
679 	case TYPEC_CC_RD:
680 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
681 					     FUSB_REG_MASK_BC_LVL |
682 					     FUSB_REG_MASK_COMP_CHNG,
683 					     FUSB_REG_MASK_BC_LVL);
684 		if (ret < 0) {
685 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
686 				    ret);
687 			goto done;
688 		}
689 		chip->intr_bc_lvl = true;
690 		break;
691 	default:
692 		break;
693 	}
694 done:
695 	mutex_unlock(&chip->lock);
696 
697 	return ret;
698 }
699 
700 static int tcpm_get_cc(struct tcpc_dev *dev, enum typec_cc_status *cc1,
701 		       enum typec_cc_status *cc2)
702 {
703 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
704 						 tcpc_dev);
705 
706 	mutex_lock(&chip->lock);
707 	*cc1 = chip->cc1;
708 	*cc2 = chip->cc2;
709 	fusb302_log(chip, "cc1=%s, cc2=%s", typec_cc_status_name[*cc1],
710 		    typec_cc_status_name[*cc2]);
711 	mutex_unlock(&chip->lock);
712 
713 	return 0;
714 }
715 
716 static int tcpm_set_polarity(struct tcpc_dev *dev,
717 			     enum typec_cc_polarity polarity)
718 {
719 	return 0;
720 }
721 
722 static int tcpm_set_vconn(struct tcpc_dev *dev, bool on)
723 {
724 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
725 						 tcpc_dev);
726 	int ret = 0;
727 	u8 switches0_data = 0x00;
728 	u8 switches0_mask = FUSB_REG_SWITCHES0_VCONN_CC1 |
729 			    FUSB_REG_SWITCHES0_VCONN_CC2;
730 
731 	mutex_lock(&chip->lock);
732 	if (chip->vconn_on == on) {
733 		fusb302_log(chip, "vconn is already %s", on ? "On" : "Off");
734 		goto done;
735 	}
736 	if (on) {
737 		switches0_data = (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
738 				 FUSB_REG_SWITCHES0_VCONN_CC2 :
739 				 FUSB_REG_SWITCHES0_VCONN_CC1;
740 	}
741 	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
742 				     switches0_mask, switches0_data);
743 	if (ret < 0)
744 		goto done;
745 	chip->vconn_on = on;
746 	fusb302_log(chip, "vconn := %s", on ? "On" : "Off");
747 done:
748 	mutex_unlock(&chip->lock);
749 
750 	return ret;
751 }
752 
753 static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge)
754 {
755 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
756 						 tcpc_dev);
757 	int ret = 0;
758 
759 	mutex_lock(&chip->lock);
760 	if (chip->vbus_on == on) {
761 		fusb302_log(chip, "vbus is already %s", on ? "On" : "Off");
762 	} else {
763 		if (on)
764 			ret = regulator_enable(chip->vbus);
765 		else
766 			ret = regulator_disable(chip->vbus);
767 		if (ret < 0) {
768 			fusb302_log(chip, "cannot %s vbus regulator, ret=%d",
769 				    on ? "enable" : "disable", ret);
770 			goto done;
771 		}
772 		chip->vbus_on = on;
773 		fusb302_log(chip, "vbus := %s", on ? "On" : "Off");
774 	}
775 	if (chip->charge_on == charge)
776 		fusb302_log(chip, "charge is already %s",
777 			    charge ? "On" : "Off");
778 	else
779 		chip->charge_on = charge;
780 
781 done:
782 	mutex_unlock(&chip->lock);
783 
784 	return ret;
785 }
786 
787 static int fusb302_pd_tx_flush(struct fusb302_chip *chip)
788 {
789 	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL0,
790 				    FUSB_REG_CONTROL0_TX_FLUSH);
791 }
792 
793 static int fusb302_pd_rx_flush(struct fusb302_chip *chip)
794 {
795 	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL1,
796 				    FUSB_REG_CONTROL1_RX_FLUSH);
797 }
798 
799 static int fusb302_pd_set_auto_goodcrc(struct fusb302_chip *chip, bool on)
800 {
801 	if (on)
802 		return fusb302_i2c_set_bits(chip, FUSB_REG_SWITCHES1,
803 					    FUSB_REG_SWITCHES1_AUTO_GCRC);
804 	return fusb302_i2c_clear_bits(chip, FUSB_REG_SWITCHES1,
805 					    FUSB_REG_SWITCHES1_AUTO_GCRC);
806 }
807 
808 static int fusb302_pd_set_interrupts(struct fusb302_chip *chip, bool on)
809 {
810 	int ret = 0;
811 	u8 mask_interrupts = FUSB_REG_MASK_COLLISION;
812 	u8 maska_interrupts = FUSB_REG_MASKA_RETRYFAIL |
813 			      FUSB_REG_MASKA_HARDSENT |
814 			      FUSB_REG_MASKA_TX_SUCCESS |
815 			      FUSB_REG_MASKA_HARDRESET;
816 	u8 maskb_interrupts = FUSB_REG_MASKB_GCRCSENT;
817 
818 	ret = on ?
819 		fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, mask_interrupts) :
820 		fusb302_i2c_set_bits(chip, FUSB_REG_MASK, mask_interrupts);
821 	if (ret < 0)
822 		return ret;
823 	ret = on ?
824 		fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, maska_interrupts) :
825 		fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, maska_interrupts);
826 	if (ret < 0)
827 		return ret;
828 	ret = on ?
829 		fusb302_i2c_clear_bits(chip, FUSB_REG_MASKB, maskb_interrupts) :
830 		fusb302_i2c_set_bits(chip, FUSB_REG_MASKB, maskb_interrupts);
831 	return ret;
832 }
833 
834 static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on)
835 {
836 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
837 						 tcpc_dev);
838 	int ret = 0;
839 
840 	mutex_lock(&chip->lock);
841 	ret = fusb302_pd_rx_flush(chip);
842 	if (ret < 0) {
843 		fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret);
844 		goto done;
845 	}
846 	ret = fusb302_pd_tx_flush(chip);
847 	if (ret < 0) {
848 		fusb302_log(chip, "cannot flush pd tx buffer, ret=%d", ret);
849 		goto done;
850 	}
851 	ret = fusb302_pd_set_auto_goodcrc(chip, on);
852 	if (ret < 0) {
853 		fusb302_log(chip, "cannot turn %s auto GCRC, ret=%d",
854 			    on ? "on" : "off", ret);
855 		goto done;
856 	}
857 	ret = fusb302_pd_set_interrupts(chip, on);
858 	if (ret < 0) {
859 		fusb302_log(chip, "cannot turn %s pd interrupts, ret=%d",
860 			    on ? "on" : "off", ret);
861 		goto done;
862 	}
863 	fusb302_log(chip, "pd := %s", on ? "on" : "off");
864 done:
865 	mutex_unlock(&chip->lock);
866 
867 	return ret;
868 }
869 
870 static const char * const typec_role_name[] = {
871 	[TYPEC_SINK]		= "Sink",
872 	[TYPEC_SOURCE]		= "Source",
873 };
874 
875 static const char * const typec_data_role_name[] = {
876 	[TYPEC_DEVICE]		= "Device",
877 	[TYPEC_HOST]		= "Host",
878 };
879 
880 static int tcpm_set_roles(struct tcpc_dev *dev, bool attached,
881 			  enum typec_role pwr, enum typec_data_role data)
882 {
883 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
884 						 tcpc_dev);
885 	int ret = 0;
886 	u8 switches1_mask = FUSB_REG_SWITCHES1_POWERROLE |
887 			    FUSB_REG_SWITCHES1_DATAROLE;
888 	u8 switches1_data = 0x00;
889 
890 	mutex_lock(&chip->lock);
891 	if (pwr == TYPEC_SOURCE)
892 		switches1_data |= FUSB_REG_SWITCHES1_POWERROLE;
893 	if (data == TYPEC_HOST)
894 		switches1_data |= FUSB_REG_SWITCHES1_DATAROLE;
895 	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
896 				     switches1_mask, switches1_data);
897 	if (ret < 0) {
898 		fusb302_log(chip, "unable to set pd header %s, %s, ret=%d",
899 			    typec_role_name[pwr], typec_data_role_name[data],
900 			    ret);
901 		goto done;
902 	}
903 	fusb302_log(chip, "pd header := %s, %s", typec_role_name[pwr],
904 		    typec_data_role_name[data]);
905 done:
906 	mutex_unlock(&chip->lock);
907 
908 	return ret;
909 }
910 
911 static int tcpm_start_toggling(struct tcpc_dev *dev,
912 			       enum typec_port_type port_type,
913 			       enum typec_cc_status cc)
914 {
915 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
916 						 tcpc_dev);
917 	enum toggling_mode mode = TOGGLING_MODE_OFF;
918 	int ret = 0;
919 
920 	switch (port_type) {
921 	case TYPEC_PORT_SRC:
922 		mode = TOGGLING_MODE_SRC;
923 		break;
924 	case TYPEC_PORT_SNK:
925 		mode = TOGGLING_MODE_SNK;
926 		break;
927 	case TYPEC_PORT_DRP:
928 		mode = TOGGLING_MODE_DRP;
929 		break;
930 	}
931 
932 	mutex_lock(&chip->lock);
933 	ret = fusb302_set_src_current(chip, cc_src_current[cc]);
934 	if (ret < 0) {
935 		fusb302_log(chip, "unable to set src current %s, ret=%d",
936 			    typec_cc_status_name[cc], ret);
937 		goto done;
938 	}
939 	ret = fusb302_set_toggling(chip, mode);
940 	if (ret < 0) {
941 		fusb302_log(chip,
942 			    "unable to start drp toggling, ret=%d", ret);
943 		goto done;
944 	}
945 	fusb302_log(chip, "start drp toggling");
946 done:
947 	mutex_unlock(&chip->lock);
948 
949 	return ret;
950 }
951 
952 static int fusb302_pd_send_message(struct fusb302_chip *chip,
953 				   const struct pd_message *msg)
954 {
955 	int ret = 0;
956 	u8 buf[40];
957 	u8 pos = 0;
958 	int len;
959 
960 	/* SOP tokens */
961 	buf[pos++] = FUSB302_TKN_SYNC1;
962 	buf[pos++] = FUSB302_TKN_SYNC1;
963 	buf[pos++] = FUSB302_TKN_SYNC1;
964 	buf[pos++] = FUSB302_TKN_SYNC2;
965 
966 	len = pd_header_cnt_le(msg->header) * 4;
967 	/* plug 2 for header */
968 	len += 2;
969 	if (len > 0x1F) {
970 		fusb302_log(chip,
971 			    "PD message too long %d (incl. header)", len);
972 		return -EINVAL;
973 	}
974 	/* packsym tells the FUSB302 chip that the next X bytes are payload */
975 	buf[pos++] = FUSB302_TKN_PACKSYM | (len & 0x1F);
976 	memcpy(&buf[pos], &msg->header, sizeof(msg->header));
977 	pos += sizeof(msg->header);
978 
979 	len -= 2;
980 	memcpy(&buf[pos], msg->payload, len);
981 	pos += len;
982 
983 	/* CRC */
984 	buf[pos++] = FUSB302_TKN_JAMCRC;
985 	/* EOP */
986 	buf[pos++] = FUSB302_TKN_EOP;
987 	/* turn tx off after sending message */
988 	buf[pos++] = FUSB302_TKN_TXOFF;
989 	/* start transmission */
990 	buf[pos++] = FUSB302_TKN_TXON;
991 
992 	ret = fusb302_i2c_block_write(chip, FUSB_REG_FIFOS, pos, buf);
993 	if (ret < 0)
994 		return ret;
995 	fusb302_log(chip, "sending PD message header: %x", msg->header);
996 	fusb302_log(chip, "sending PD message len: %d", len);
997 
998 	return ret;
999 }
1000 
1001 static int fusb302_pd_send_hardreset(struct fusb302_chip *chip)
1002 {
1003 	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3,
1004 				    FUSB_REG_CONTROL3_SEND_HARDRESET);
1005 }
1006 
1007 static const char * const transmit_type_name[] = {
1008 	[TCPC_TX_SOP]			= "SOP",
1009 	[TCPC_TX_SOP_PRIME]		= "SOP'",
1010 	[TCPC_TX_SOP_PRIME_PRIME]	= "SOP''",
1011 	[TCPC_TX_SOP_DEBUG_PRIME]	= "DEBUG'",
1012 	[TCPC_TX_SOP_DEBUG_PRIME_PRIME]	= "DEBUG''",
1013 	[TCPC_TX_HARD_RESET]		= "HARD_RESET",
1014 	[TCPC_TX_CABLE_RESET]		= "CABLE_RESET",
1015 	[TCPC_TX_BIST_MODE_2]		= "BIST_MODE_2",
1016 };
1017 
1018 static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type,
1019 			    const struct pd_message *msg, unsigned int negotiated_rev)
1020 {
1021 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
1022 						 tcpc_dev);
1023 	int ret = 0;
1024 
1025 	mutex_lock(&chip->lock);
1026 	switch (type) {
1027 	case TCPC_TX_SOP:
1028 		/* nRetryCount 3 in P2.0 spec, whereas 2 in PD3.0 spec */
1029 		ret = fusb302_enable_tx_auto_retries(chip, negotiated_rev > PD_REV20 ?
1030 						     FUSB_REG_CONTROL3_N_RETRIES_2 :
1031 						     FUSB_REG_CONTROL3_N_RETRIES_3);
1032 		if (ret < 0)
1033 			fusb302_log(chip, "Cannot update retry count ret=%d", ret);
1034 
1035 		ret = fusb302_pd_send_message(chip, msg);
1036 		if (ret < 0)
1037 			fusb302_log(chip,
1038 				    "cannot send PD message, ret=%d", ret);
1039 		break;
1040 	case TCPC_TX_HARD_RESET:
1041 		ret = fusb302_pd_send_hardreset(chip);
1042 		if (ret < 0)
1043 			fusb302_log(chip,
1044 				    "cannot send hardreset, ret=%d", ret);
1045 		break;
1046 	default:
1047 		fusb302_log(chip, "type %s not supported",
1048 			    transmit_type_name[type]);
1049 		ret = -EINVAL;
1050 	}
1051 	mutex_unlock(&chip->lock);
1052 
1053 	return ret;
1054 }
1055 
1056 static enum typec_cc_status fusb302_bc_lvl_to_cc(u8 bc_lvl)
1057 {
1058 	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_1230_MAX)
1059 		return TYPEC_CC_RP_3_0;
1060 	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_600_1230)
1061 		return TYPEC_CC_RP_1_5;
1062 	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_200_600)
1063 		return TYPEC_CC_RP_DEF;
1064 	return TYPEC_CC_OPEN;
1065 }
1066 
1067 static void fusb302_bc_lvl_handler_work(struct work_struct *work)
1068 {
1069 	struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
1070 						 bc_lvl_handler.work);
1071 	int ret = 0;
1072 	u8 status0;
1073 	u8 bc_lvl;
1074 	enum typec_cc_status cc_status;
1075 
1076 	mutex_lock(&chip->lock);
1077 	if (!chip->intr_bc_lvl) {
1078 		fusb302_log(chip, "BC_LVL interrupt is turned off, abort");
1079 		goto done;
1080 	}
1081 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1082 	if (ret < 0)
1083 		goto done;
1084 	fusb302_log(chip, "BC_LVL handler, status0=0x%02x", status0);
1085 	if (status0 & FUSB_REG_STATUS0_ACTIVITY) {
1086 		fusb302_log(chip, "CC activities detected, delay handling");
1087 		mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
1088 				 msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
1089 		goto done;
1090 	}
1091 	bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
1092 	cc_status = fusb302_bc_lvl_to_cc(bc_lvl);
1093 	if (chip->cc_polarity == TYPEC_POLARITY_CC1) {
1094 		if (chip->cc1 != cc_status) {
1095 			fusb302_log(chip, "cc1: %s -> %s",
1096 				    typec_cc_status_name[chip->cc1],
1097 				    typec_cc_status_name[cc_status]);
1098 			chip->cc1 = cc_status;
1099 			tcpm_cc_change(chip->tcpm_port);
1100 		}
1101 	} else {
1102 		if (chip->cc2 != cc_status) {
1103 			fusb302_log(chip, "cc2: %s -> %s",
1104 				    typec_cc_status_name[chip->cc2],
1105 				    typec_cc_status_name[cc_status]);
1106 			chip->cc2 = cc_status;
1107 			tcpm_cc_change(chip->tcpm_port);
1108 		}
1109 	}
1110 
1111 done:
1112 	mutex_unlock(&chip->lock);
1113 }
1114 
1115 static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev)
1116 {
1117 	fusb302_tcpc_dev->init = tcpm_init;
1118 	fusb302_tcpc_dev->get_vbus = tcpm_get_vbus;
1119 	fusb302_tcpc_dev->get_current_limit = tcpm_get_current_limit;
1120 	fusb302_tcpc_dev->set_cc = tcpm_set_cc;
1121 	fusb302_tcpc_dev->get_cc = tcpm_get_cc;
1122 	fusb302_tcpc_dev->set_polarity = tcpm_set_polarity;
1123 	fusb302_tcpc_dev->set_vconn = tcpm_set_vconn;
1124 	fusb302_tcpc_dev->set_vbus = tcpm_set_vbus;
1125 	fusb302_tcpc_dev->set_pd_rx = tcpm_set_pd_rx;
1126 	fusb302_tcpc_dev->set_roles = tcpm_set_roles;
1127 	fusb302_tcpc_dev->start_toggling = tcpm_start_toggling;
1128 	fusb302_tcpc_dev->pd_transmit = tcpm_pd_transmit;
1129 }
1130 
1131 static const char * const cc_polarity_name[] = {
1132 	[TYPEC_POLARITY_CC1]	= "Polarity_CC1",
1133 	[TYPEC_POLARITY_CC2]	= "Polarity_CC2",
1134 };
1135 
1136 static int fusb302_set_cc_polarity_and_pull(struct fusb302_chip *chip,
1137 					    enum typec_cc_polarity cc_polarity,
1138 					    bool pull_up, bool pull_down)
1139 {
1140 	int ret = 0;
1141 	u8 switches0_data = 0x00;
1142 	u8 switches1_mask = FUSB_REG_SWITCHES1_TXCC1_EN |
1143 			    FUSB_REG_SWITCHES1_TXCC2_EN;
1144 	u8 switches1_data = 0x00;
1145 
1146 	if (pull_down)
1147 		switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
1148 				  FUSB_REG_SWITCHES0_CC2_PD_EN;
1149 
1150 	if (cc_polarity == TYPEC_POLARITY_CC1) {
1151 		switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC1;
1152 		if (chip->vconn_on)
1153 			switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC2;
1154 		if (pull_up)
1155 			switches0_data |= FUSB_REG_SWITCHES0_CC1_PU_EN;
1156 		switches1_data = FUSB_REG_SWITCHES1_TXCC1_EN;
1157 	} else {
1158 		switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC2;
1159 		if (chip->vconn_on)
1160 			switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC1;
1161 		if (pull_up)
1162 			switches0_data |= FUSB_REG_SWITCHES0_CC2_PU_EN;
1163 		switches1_data = FUSB_REG_SWITCHES1_TXCC2_EN;
1164 	}
1165 	ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
1166 	if (ret < 0)
1167 		return ret;
1168 	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
1169 				     switches1_mask, switches1_data);
1170 	if (ret < 0)
1171 		return ret;
1172 	chip->cc_polarity = cc_polarity;
1173 
1174 	return ret;
1175 }
1176 
1177 static int fusb302_handle_togdone_snk(struct fusb302_chip *chip,
1178 				      u8 togdone_result)
1179 {
1180 	int ret = 0;
1181 	u8 status0;
1182 	u8 bc_lvl;
1183 	enum typec_cc_polarity cc_polarity;
1184 	enum typec_cc_status cc_status_active, cc1, cc2;
1185 
1186 	/* set polarity and pull_up, pull_down */
1187 	cc_polarity = (togdone_result == FUSB_REG_STATUS1A_TOGSS_SNK1) ?
1188 		      TYPEC_POLARITY_CC1 : TYPEC_POLARITY_CC2;
1189 	ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, false, true);
1190 	if (ret < 0) {
1191 		fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
1192 			    cc_polarity_name[cc_polarity], ret);
1193 		return ret;
1194 	}
1195 	/* fusb302_set_cc_polarity() has set the correct measure block */
1196 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1197 	if (ret < 0)
1198 		return ret;
1199 	bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
1200 	cc_status_active = fusb302_bc_lvl_to_cc(bc_lvl);
1201 	/* restart toggling if the cc status on the active line is OPEN */
1202 	if (cc_status_active == TYPEC_CC_OPEN) {
1203 		fusb302_log(chip, "restart toggling as CC_OPEN detected");
1204 		ret = fusb302_set_toggling(chip, chip->toggling_mode);
1205 		return ret;
1206 	}
1207 	/* update tcpm with the new cc value */
1208 	cc1 = (cc_polarity == TYPEC_POLARITY_CC1) ?
1209 	      cc_status_active : TYPEC_CC_OPEN;
1210 	cc2 = (cc_polarity == TYPEC_POLARITY_CC2) ?
1211 	      cc_status_active : TYPEC_CC_OPEN;
1212 	if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
1213 		chip->cc1 = cc1;
1214 		chip->cc2 = cc2;
1215 		tcpm_cc_change(chip->tcpm_port);
1216 	}
1217 	/* turn off toggling */
1218 	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
1219 	if (ret < 0) {
1220 		fusb302_log(chip,
1221 			    "cannot set toggling mode off, ret=%d", ret);
1222 		return ret;
1223 	}
1224 	/* unmask bc_lvl interrupt */
1225 	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL);
1226 	if (ret < 0) {
1227 		fusb302_log(chip,
1228 			    "cannot unmask bc_lcl interrupt, ret=%d", ret);
1229 		return ret;
1230 	}
1231 	chip->intr_bc_lvl = true;
1232 	fusb302_log(chip, "detected cc1=%s, cc2=%s",
1233 		    typec_cc_status_name[cc1],
1234 		    typec_cc_status_name[cc2]);
1235 
1236 	return ret;
1237 }
1238 
1239 /* On error returns < 0, otherwise a typec_cc_status value */
1240 static int fusb302_get_src_cc_status(struct fusb302_chip *chip,
1241 				     enum typec_cc_polarity cc_polarity,
1242 				     enum typec_cc_status *cc)
1243 {
1244 	u8 ra_mda = ra_mda_value[chip->src_current_status];
1245 	u8 rd_mda = rd_mda_value[chip->src_current_status];
1246 	u8 switches0_data, status0;
1247 	int ret;
1248 
1249 	/* Step 1: Set switches so that we measure the right CC pin */
1250 	switches0_data = (cc_polarity == TYPEC_POLARITY_CC1) ?
1251 		FUSB_REG_SWITCHES0_CC1_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC1 :
1252 		FUSB_REG_SWITCHES0_CC2_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC2;
1253 	ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
1254 	if (ret < 0)
1255 		return ret;
1256 
1257 	fusb302_i2c_read(chip, FUSB_REG_SWITCHES0, &status0);
1258 	fusb302_log(chip, "get_src_cc_status switches: 0x%0x", status0);
1259 
1260 	/* Step 2: Set compararator volt to differentiate between Open and Rd */
1261 	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
1262 	if (ret < 0)
1263 		return ret;
1264 
1265 	usleep_range(50, 100);
1266 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1267 	if (ret < 0)
1268 		return ret;
1269 
1270 	fusb302_log(chip, "get_src_cc_status rd_mda status0: 0x%0x", status0);
1271 	if (status0 & FUSB_REG_STATUS0_COMP) {
1272 		*cc = TYPEC_CC_OPEN;
1273 		return 0;
1274 	}
1275 
1276 	/* Step 3: Set compararator input to differentiate between Rd and Ra. */
1277 	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, ra_mda);
1278 	if (ret < 0)
1279 		return ret;
1280 
1281 	usleep_range(50, 100);
1282 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1283 	if (ret < 0)
1284 		return ret;
1285 
1286 	fusb302_log(chip, "get_src_cc_status ra_mda status0: 0x%0x", status0);
1287 	if (status0 & FUSB_REG_STATUS0_COMP)
1288 		*cc = TYPEC_CC_RD;
1289 	else
1290 		*cc = TYPEC_CC_RA;
1291 
1292 	return 0;
1293 }
1294 
1295 static int fusb302_handle_togdone_src(struct fusb302_chip *chip,
1296 				      u8 togdone_result)
1297 {
1298 	/*
1299 	 * - set polarity (measure cc, vconn, tx)
1300 	 * - set pull_up, pull_down
1301 	 * - set cc1, cc2, and update to tcpm_port
1302 	 * - set I_COMP interrupt on
1303 	 */
1304 	int ret = 0;
1305 	u8 rd_mda = rd_mda_value[chip->src_current_status];
1306 	enum toggling_mode toggling_mode = chip->toggling_mode;
1307 	enum typec_cc_polarity cc_polarity;
1308 	enum typec_cc_status cc1, cc2;
1309 
1310 	/*
1311 	 * The toggle-engine will stop in a src state if it sees either Ra or
1312 	 * Rd. Determine the status for both CC pins, starting with the one
1313 	 * where toggling stopped, as that is where the switches point now.
1314 	 */
1315 	if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
1316 		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
1317 	else
1318 		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
1319 	if (ret < 0)
1320 		return ret;
1321 	/* we must turn off toggling before we can measure the other pin */
1322 	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
1323 	if (ret < 0) {
1324 		fusb302_log(chip, "cannot set toggling mode off, ret=%d", ret);
1325 		return ret;
1326 	}
1327 	/* get the status of the other pin */
1328 	if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
1329 		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
1330 	else
1331 		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
1332 	if (ret < 0)
1333 		return ret;
1334 
1335 	/* determine polarity based on the status of both pins */
1336 	if (cc1 == TYPEC_CC_RD &&
1337 			(cc2 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_RA)) {
1338 		cc_polarity = TYPEC_POLARITY_CC1;
1339 	} else if (cc2 == TYPEC_CC_RD &&
1340 		    (cc1 == TYPEC_CC_OPEN || cc1 == TYPEC_CC_RA)) {
1341 		cc_polarity = TYPEC_POLARITY_CC2;
1342 	} else {
1343 		fusb302_log(chip, "unexpected CC status cc1=%s, cc2=%s, restarting toggling",
1344 			    typec_cc_status_name[cc1],
1345 			    typec_cc_status_name[cc2]);
1346 		return fusb302_set_toggling(chip, toggling_mode);
1347 	}
1348 	/* set polarity and pull_up, pull_down */
1349 	ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, true, false);
1350 	if (ret < 0) {
1351 		fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
1352 			    cc_polarity_name[cc_polarity], ret);
1353 		return ret;
1354 	}
1355 	/* update tcpm with the new cc value */
1356 	if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
1357 		chip->cc1 = cc1;
1358 		chip->cc2 = cc2;
1359 		tcpm_cc_change(chip->tcpm_port);
1360 	}
1361 	/* set MDAC to Rd threshold, and unmask I_COMP for unplug detection */
1362 	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
1363 	if (ret < 0)
1364 		return ret;
1365 	/* unmask comp_chng interrupt */
1366 	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK,
1367 				     FUSB_REG_MASK_COMP_CHNG);
1368 	if (ret < 0) {
1369 		fusb302_log(chip,
1370 			    "cannot unmask comp_chng interrupt, ret=%d", ret);
1371 		return ret;
1372 	}
1373 	chip->intr_comp_chng = true;
1374 	fusb302_log(chip, "detected cc1=%s, cc2=%s",
1375 		    typec_cc_status_name[cc1],
1376 		    typec_cc_status_name[cc2]);
1377 
1378 	return ret;
1379 }
1380 
1381 static int fusb302_handle_togdone(struct fusb302_chip *chip)
1382 {
1383 	int ret = 0;
1384 	u8 status1a;
1385 	u8 togdone_result;
1386 
1387 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS1A, &status1a);
1388 	if (ret < 0)
1389 		return ret;
1390 	togdone_result = (status1a >> FUSB_REG_STATUS1A_TOGSS_POS) &
1391 			 FUSB_REG_STATUS1A_TOGSS_MASK;
1392 	switch (togdone_result) {
1393 	case FUSB_REG_STATUS1A_TOGSS_SNK1:
1394 	case FUSB_REG_STATUS1A_TOGSS_SNK2:
1395 		return fusb302_handle_togdone_snk(chip, togdone_result);
1396 	case FUSB_REG_STATUS1A_TOGSS_SRC1:
1397 	case FUSB_REG_STATUS1A_TOGSS_SRC2:
1398 		return fusb302_handle_togdone_src(chip, togdone_result);
1399 	case FUSB_REG_STATUS1A_TOGSS_AA:
1400 		/* doesn't support */
1401 		fusb302_log(chip, "AudioAccessory not supported");
1402 		fusb302_set_toggling(chip, chip->toggling_mode);
1403 		break;
1404 	default:
1405 		fusb302_log(chip, "TOGDONE with an invalid state: %d",
1406 			    togdone_result);
1407 		fusb302_set_toggling(chip, chip->toggling_mode);
1408 		break;
1409 	}
1410 	return ret;
1411 }
1412 
1413 static int fusb302_pd_reset(struct fusb302_chip *chip)
1414 {
1415 	return fusb302_i2c_set_bits(chip, FUSB_REG_RESET,
1416 				    FUSB_REG_RESET_PD_RESET);
1417 }
1418 
1419 static int fusb302_pd_read_message(struct fusb302_chip *chip,
1420 				   struct pd_message *msg)
1421 {
1422 	int ret = 0;
1423 	u8 token;
1424 	u8 crc[4];
1425 	int len;
1426 
1427 	/* first SOP token */
1428 	ret = fusb302_i2c_read(chip, FUSB_REG_FIFOS, &token);
1429 	if (ret < 0)
1430 		return ret;
1431 	ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 2,
1432 				     (u8 *)&msg->header);
1433 	if (ret < 0)
1434 		return ret;
1435 	len = pd_header_cnt_le(msg->header) * 4;
1436 	/* add 4 to length to include the CRC */
1437 	if (len > PD_MAX_PAYLOAD * 4) {
1438 		fusb302_log(chip, "PD message too long %d", len);
1439 		return -EINVAL;
1440 	}
1441 	if (len > 0) {
1442 		ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, len,
1443 					     (u8 *)msg->payload);
1444 		if (ret < 0)
1445 			return ret;
1446 	}
1447 	/* another 4 bytes to read CRC out */
1448 	ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 4, crc);
1449 	if (ret < 0)
1450 		return ret;
1451 	fusb302_log(chip, "PD message header: %x", msg->header);
1452 	fusb302_log(chip, "PD message len: %d", len);
1453 
1454 	/*
1455 	 * Check if we've read off a GoodCRC message. If so then indicate to
1456 	 * TCPM that the previous transmission has completed. Otherwise we pass
1457 	 * the received message over to TCPM for processing.
1458 	 *
1459 	 * We make this check here instead of basing the reporting decision on
1460 	 * the IRQ event type, as it's possible for the chip to report the
1461 	 * TX_SUCCESS and GCRCSENT events out of order on occasion, so we need
1462 	 * to check the message type to ensure correct reporting to TCPM.
1463 	 */
1464 	if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC))
1465 		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
1466 	else
1467 		tcpm_pd_receive(chip->tcpm_port, msg);
1468 
1469 	return ret;
1470 }
1471 
1472 static irqreturn_t fusb302_irq_intn(int irq, void *dev_id)
1473 {
1474 	struct fusb302_chip *chip = dev_id;
1475 	unsigned long flags;
1476 
1477 	/* Disable our level triggered IRQ until our irq_work has cleared it */
1478 	disable_irq_nosync(chip->gpio_int_n_irq);
1479 
1480 	spin_lock_irqsave(&chip->irq_lock, flags);
1481 	if (chip->irq_suspended)
1482 		chip->irq_while_suspended = true;
1483 	else
1484 		schedule_work(&chip->irq_work);
1485 	spin_unlock_irqrestore(&chip->irq_lock, flags);
1486 
1487 	return IRQ_HANDLED;
1488 }
1489 
1490 static void fusb302_irq_work(struct work_struct *work)
1491 {
1492 	struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
1493 						 irq_work);
1494 	int ret = 0;
1495 	u8 interrupt;
1496 	u8 interrupta;
1497 	u8 interruptb;
1498 	u8 status0;
1499 	bool vbus_present;
1500 	bool comp_result;
1501 	bool intr_togdone;
1502 	bool intr_bc_lvl;
1503 	bool intr_comp_chng;
1504 	struct pd_message pd_msg;
1505 
1506 	mutex_lock(&chip->lock);
1507 	/* grab a snapshot of intr flags */
1508 	intr_togdone = chip->intr_togdone;
1509 	intr_bc_lvl = chip->intr_bc_lvl;
1510 	intr_comp_chng = chip->intr_comp_chng;
1511 
1512 	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, &interrupt);
1513 	if (ret < 0)
1514 		goto done;
1515 	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTA, &interrupta);
1516 	if (ret < 0)
1517 		goto done;
1518 	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTB, &interruptb);
1519 	if (ret < 0)
1520 		goto done;
1521 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1522 	if (ret < 0)
1523 		goto done;
1524 	fusb302_log(chip,
1525 		    "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x",
1526 		    interrupt, interrupta, interruptb, status0);
1527 
1528 	if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) {
1529 		vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK);
1530 		fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s",
1531 			    vbus_present ? "On" : "Off");
1532 		if (vbus_present != chip->vbus_present) {
1533 			chip->vbus_present = vbus_present;
1534 			tcpm_vbus_change(chip->tcpm_port);
1535 		}
1536 	}
1537 
1538 	if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) {
1539 		fusb302_log(chip, "IRQ: TOGDONE");
1540 		ret = fusb302_handle_togdone(chip);
1541 		if (ret < 0) {
1542 			fusb302_log(chip,
1543 				    "handle togdone error, ret=%d", ret);
1544 			goto done;
1545 		}
1546 	}
1547 
1548 	if ((interrupt & FUSB_REG_INTERRUPT_BC_LVL) && intr_bc_lvl) {
1549 		fusb302_log(chip, "IRQ: BC_LVL, handler pending");
1550 		/*
1551 		 * as BC_LVL interrupt can be affected by PD activity,
1552 		 * apply delay to for the handler to wait for the PD
1553 		 * signaling to finish.
1554 		 */
1555 		mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
1556 				 msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
1557 	}
1558 
1559 	if ((interrupt & FUSB_REG_INTERRUPT_COMP_CHNG) && intr_comp_chng) {
1560 		comp_result = !!(status0 & FUSB_REG_STATUS0_COMP);
1561 		fusb302_log(chip, "IRQ: COMP_CHNG, comp=%s",
1562 			    comp_result ? "true" : "false");
1563 		if (comp_result) {
1564 			/* cc level > Rd_threshold, detach */
1565 			chip->cc1 = TYPEC_CC_OPEN;
1566 			chip->cc2 = TYPEC_CC_OPEN;
1567 			tcpm_cc_change(chip->tcpm_port);
1568 		}
1569 	}
1570 
1571 	if (interrupt & FUSB_REG_INTERRUPT_COLLISION) {
1572 		fusb302_log(chip, "IRQ: PD collision");
1573 		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
1574 	}
1575 
1576 	if (interrupta & FUSB_REG_INTERRUPTA_RETRYFAIL) {
1577 		fusb302_log(chip, "IRQ: PD retry failed");
1578 		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
1579 	}
1580 
1581 	if (interrupta & FUSB_REG_INTERRUPTA_HARDSENT) {
1582 		fusb302_log(chip, "IRQ: PD hardreset sent");
1583 		ret = fusb302_pd_reset(chip);
1584 		if (ret < 0) {
1585 			fusb302_log(chip, "cannot PD reset, ret=%d", ret);
1586 			goto done;
1587 		}
1588 		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
1589 	}
1590 
1591 	if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) {
1592 		fusb302_log(chip, "IRQ: PD tx success");
1593 		ret = fusb302_pd_read_message(chip, &pd_msg);
1594 		if (ret < 0) {
1595 			fusb302_log(chip,
1596 				    "cannot read in PD message, ret=%d", ret);
1597 			goto done;
1598 		}
1599 	}
1600 
1601 	if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) {
1602 		fusb302_log(chip, "IRQ: PD received hardreset");
1603 		ret = fusb302_pd_reset(chip);
1604 		if (ret < 0) {
1605 			fusb302_log(chip, "cannot PD reset, ret=%d", ret);
1606 			goto done;
1607 		}
1608 		tcpm_pd_hard_reset(chip->tcpm_port);
1609 	}
1610 
1611 	if (interruptb & FUSB_REG_INTERRUPTB_GCRCSENT) {
1612 		fusb302_log(chip, "IRQ: PD sent good CRC");
1613 		ret = fusb302_pd_read_message(chip, &pd_msg);
1614 		if (ret < 0) {
1615 			fusb302_log(chip,
1616 				    "cannot read in PD message, ret=%d", ret);
1617 			goto done;
1618 		}
1619 	}
1620 done:
1621 	mutex_unlock(&chip->lock);
1622 	enable_irq(chip->gpio_int_n_irq);
1623 }
1624 
1625 static int init_gpio(struct fusb302_chip *chip)
1626 {
1627 	struct device *dev = chip->dev;
1628 	int ret = 0;
1629 
1630 	chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN);
1631 	if (IS_ERR(chip->gpio_int_n)) {
1632 		dev_err(dev, "failed to request gpio_int_n\n");
1633 		return PTR_ERR(chip->gpio_int_n);
1634 	}
1635 	ret = gpiod_to_irq(chip->gpio_int_n);
1636 	if (ret < 0) {
1637 		dev_err(dev,
1638 			"cannot request IRQ for GPIO Int_N, ret=%d", ret);
1639 		return ret;
1640 	}
1641 	chip->gpio_int_n_irq = ret;
1642 	return 0;
1643 }
1644 
1645 #define PDO_FIXED_FLAGS \
1646 	(PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
1647 
1648 static const u32 src_pdo[] = {
1649 	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
1650 };
1651 
1652 static const u32 snk_pdo[] = {
1653 	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
1654 };
1655 
1656 static const struct property_entry port_props[] = {
1657 	PROPERTY_ENTRY_STRING("data-role", "dual"),
1658 	PROPERTY_ENTRY_STRING("power-role", "dual"),
1659 	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
1660 	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
1661 	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
1662 	PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
1663 	{ }
1664 };
1665 
1666 static struct fwnode_handle *fusb302_fwnode_get(struct device *dev)
1667 {
1668 	struct fwnode_handle *fwnode;
1669 
1670 	fwnode = device_get_named_child_node(dev, "connector");
1671 	if (!fwnode)
1672 		fwnode = fwnode_create_software_node(port_props, NULL);
1673 
1674 	return fwnode;
1675 }
1676 
1677 static int fusb302_probe(struct i2c_client *client,
1678 			 const struct i2c_device_id *id)
1679 {
1680 	struct fusb302_chip *chip;
1681 	struct i2c_adapter *adapter = client->adapter;
1682 	struct device *dev = &client->dev;
1683 	const char *name;
1684 	int ret = 0;
1685 
1686 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
1687 		dev_err(&client->dev,
1688 			"I2C/SMBus block functionality not supported!\n");
1689 		return -ENODEV;
1690 	}
1691 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
1692 	if (!chip)
1693 		return -ENOMEM;
1694 
1695 	chip->i2c_client = client;
1696 	chip->dev = &client->dev;
1697 	mutex_init(&chip->lock);
1698 
1699 	/*
1700 	 * Devicetree platforms should get extcon via phandle (not yet
1701 	 * supported). On ACPI platforms, we get the name from a device prop.
1702 	 * This device prop is for kernel internal use only and is expected
1703 	 * to be set by the platform code which also registers the i2c client
1704 	 * for the fusb302.
1705 	 */
1706 	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
1707 		chip->extcon = extcon_get_extcon_dev(name);
1708 		if (!chip->extcon)
1709 			return -EPROBE_DEFER;
1710 	}
1711 
1712 	chip->vbus = devm_regulator_get(chip->dev, "vbus");
1713 	if (IS_ERR(chip->vbus))
1714 		return PTR_ERR(chip->vbus);
1715 
1716 	chip->wq = create_singlethread_workqueue(dev_name(chip->dev));
1717 	if (!chip->wq)
1718 		return -ENOMEM;
1719 
1720 	spin_lock_init(&chip->irq_lock);
1721 	INIT_WORK(&chip->irq_work, fusb302_irq_work);
1722 	INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work);
1723 	init_tcpc_dev(&chip->tcpc_dev);
1724 	fusb302_debugfs_init(chip);
1725 
1726 	if (client->irq) {
1727 		chip->gpio_int_n_irq = client->irq;
1728 	} else {
1729 		ret = init_gpio(chip);
1730 		if (ret < 0)
1731 			goto destroy_workqueue;
1732 	}
1733 
1734 	chip->tcpc_dev.fwnode = fusb302_fwnode_get(dev);
1735 	if (IS_ERR(chip->tcpc_dev.fwnode)) {
1736 		ret = PTR_ERR(chip->tcpc_dev.fwnode);
1737 		goto destroy_workqueue;
1738 	}
1739 
1740 	chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
1741 	if (IS_ERR(chip->tcpm_port)) {
1742 		fwnode_handle_put(chip->tcpc_dev.fwnode);
1743 		ret = PTR_ERR(chip->tcpm_port);
1744 		if (ret != -EPROBE_DEFER)
1745 			dev_err(dev, "cannot register tcpm port, ret=%d", ret);
1746 		goto destroy_workqueue;
1747 	}
1748 
1749 	ret = request_irq(chip->gpio_int_n_irq, fusb302_irq_intn,
1750 			  IRQF_ONESHOT | IRQF_TRIGGER_LOW,
1751 			  "fsc_interrupt_int_n", chip);
1752 	if (ret < 0) {
1753 		dev_err(dev, "cannot request IRQ for GPIO Int_N, ret=%d", ret);
1754 		goto tcpm_unregister_port;
1755 	}
1756 	enable_irq_wake(chip->gpio_int_n_irq);
1757 	i2c_set_clientdata(client, chip);
1758 
1759 	return ret;
1760 
1761 tcpm_unregister_port:
1762 	tcpm_unregister_port(chip->tcpm_port);
1763 	fwnode_handle_put(chip->tcpc_dev.fwnode);
1764 destroy_workqueue:
1765 	fusb302_debugfs_exit(chip);
1766 	destroy_workqueue(chip->wq);
1767 
1768 	return ret;
1769 }
1770 
1771 static int fusb302_remove(struct i2c_client *client)
1772 {
1773 	struct fusb302_chip *chip = i2c_get_clientdata(client);
1774 
1775 	disable_irq_wake(chip->gpio_int_n_irq);
1776 	free_irq(chip->gpio_int_n_irq, chip);
1777 	cancel_work_sync(&chip->irq_work);
1778 	cancel_delayed_work_sync(&chip->bc_lvl_handler);
1779 	tcpm_unregister_port(chip->tcpm_port);
1780 	fwnode_handle_put(chip->tcpc_dev.fwnode);
1781 	destroy_workqueue(chip->wq);
1782 	fusb302_debugfs_exit(chip);
1783 
1784 	return 0;
1785 }
1786 
1787 static int fusb302_pm_suspend(struct device *dev)
1788 {
1789 	struct fusb302_chip *chip = dev->driver_data;
1790 	unsigned long flags;
1791 
1792 	spin_lock_irqsave(&chip->irq_lock, flags);
1793 	chip->irq_suspended = true;
1794 	spin_unlock_irqrestore(&chip->irq_lock, flags);
1795 
1796 	/* Make sure any pending irq_work is finished before the bus suspends */
1797 	flush_work(&chip->irq_work);
1798 	return 0;
1799 }
1800 
1801 static int fusb302_pm_resume(struct device *dev)
1802 {
1803 	struct fusb302_chip *chip = dev->driver_data;
1804 	unsigned long flags;
1805 
1806 	spin_lock_irqsave(&chip->irq_lock, flags);
1807 	if (chip->irq_while_suspended) {
1808 		schedule_work(&chip->irq_work);
1809 		chip->irq_while_suspended = false;
1810 	}
1811 	chip->irq_suspended = false;
1812 	spin_unlock_irqrestore(&chip->irq_lock, flags);
1813 
1814 	return 0;
1815 }
1816 
1817 static const struct of_device_id fusb302_dt_match[] = {
1818 	{.compatible = "fcs,fusb302"},
1819 	{},
1820 };
1821 MODULE_DEVICE_TABLE(of, fusb302_dt_match);
1822 
1823 static const struct i2c_device_id fusb302_i2c_device_id[] = {
1824 	{"typec_fusb302", 0},
1825 	{},
1826 };
1827 MODULE_DEVICE_TABLE(i2c, fusb302_i2c_device_id);
1828 
1829 static const struct dev_pm_ops fusb302_pm_ops = {
1830 	.suspend = fusb302_pm_suspend,
1831 	.resume = fusb302_pm_resume,
1832 };
1833 
1834 static struct i2c_driver fusb302_driver = {
1835 	.driver = {
1836 		   .name = "typec_fusb302",
1837 		   .pm = &fusb302_pm_ops,
1838 		   .of_match_table = of_match_ptr(fusb302_dt_match),
1839 		   },
1840 	.probe = fusb302_probe,
1841 	.remove = fusb302_remove,
1842 	.id_table = fusb302_i2c_device_id,
1843 };
1844 module_i2c_driver(fusb302_driver);
1845 
1846 MODULE_AUTHOR("Yueyao Zhu <yueyao.zhu@gmail.com>");
1847 MODULE_DESCRIPTION("Fairchild FUSB302 Type-C Chip Driver");
1848 MODULE_LICENSE("GPL");
1849