xref: /openbmc/linux/drivers/usb/typec/tcpm/fusb302.c (revision 0ed66cb7)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2016-2017 Google, Inc
4  *
5  * Fairchild FUSB302 Type-C Chip Driver
6  */
7 
8 #include <linux/debugfs.h>
9 #include <linux/delay.h>
10 #include <linux/errno.h>
11 #include <linux/extcon.h>
12 #include <linux/gpio/consumer.h>
13 #include <linux/i2c.h>
14 #include <linux/interrupt.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/mutex.h>
18 #include <linux/of_device.h>
19 #include <linux/pinctrl/consumer.h>
20 #include <linux/proc_fs.h>
21 #include <linux/regulator/consumer.h>
22 #include <linux/sched/clock.h>
23 #include <linux/seq_file.h>
24 #include <linux/slab.h>
25 #include <linux/spinlock.h>
26 #include <linux/string.h>
27 #include <linux/types.h>
28 #include <linux/usb.h>
29 #include <linux/usb/typec.h>
30 #include <linux/usb/tcpm.h>
31 #include <linux/usb/pd.h>
32 #include <linux/workqueue.h>
33 
34 #include "fusb302_reg.h"
35 
36 /*
37  * When the device is SNK, BC_LVL interrupt is used to monitor cc pins
38  * for the current capability offered by the SRC. As FUSB302 chip fires
39  * the BC_LVL interrupt on PD signalings, cc lvl should be handled after
40  * a delay to avoid measuring on PD activities. The delay is slightly
41  * longer than PD_T_PD_DEBPUNCE (10-20ms).
42  */
43 #define T_BC_LVL_DEBOUNCE_DELAY_MS 30
44 
45 enum toggling_mode {
46 	TOGGLING_MODE_OFF,
47 	TOGGLING_MODE_DRP,
48 	TOGGLING_MODE_SNK,
49 	TOGGLING_MODE_SRC,
50 };
51 
52 enum src_current_status {
53 	SRC_CURRENT_DEFAULT,
54 	SRC_CURRENT_MEDIUM,
55 	SRC_CURRENT_HIGH,
56 };
57 
58 static const u8 ra_mda_value[] = {
59 	[SRC_CURRENT_DEFAULT] = 4,	/* 210mV */
60 	[SRC_CURRENT_MEDIUM] = 9,	/* 420mV */
61 	[SRC_CURRENT_HIGH] = 18,	/* 798mV */
62 };
63 
64 static const u8 rd_mda_value[] = {
65 	[SRC_CURRENT_DEFAULT] = 38,	/* 1638mV */
66 	[SRC_CURRENT_MEDIUM] = 38,	/* 1638mV */
67 	[SRC_CURRENT_HIGH] = 61,	/* 2604mV */
68 };
69 
70 #define LOG_BUFFER_ENTRIES	1024
71 #define LOG_BUFFER_ENTRY_SIZE	128
72 
73 struct fusb302_chip {
74 	struct device *dev;
75 	struct i2c_client *i2c_client;
76 	struct tcpm_port *tcpm_port;
77 	struct tcpc_dev tcpc_dev;
78 
79 	struct regulator *vbus;
80 
81 	spinlock_t irq_lock;
82 	struct work_struct irq_work;
83 	bool irq_suspended;
84 	bool irq_while_suspended;
85 	struct gpio_desc *gpio_int_n;
86 	int gpio_int_n_irq;
87 	struct extcon_dev *extcon;
88 
89 	struct workqueue_struct *wq;
90 	struct delayed_work bc_lvl_handler;
91 
92 	/* lock for sharing chip states */
93 	struct mutex lock;
94 
95 	/* chip status */
96 	enum toggling_mode toggling_mode;
97 	enum src_current_status src_current_status;
98 	bool intr_togdone;
99 	bool intr_bc_lvl;
100 	bool intr_comp_chng;
101 
102 	/* port status */
103 	bool vconn_on;
104 	bool vbus_on;
105 	bool charge_on;
106 	bool vbus_present;
107 	enum typec_cc_polarity cc_polarity;
108 	enum typec_cc_status cc1;
109 	enum typec_cc_status cc2;
110 	u32 snk_pdo[PDO_MAX_OBJECTS];
111 
112 #ifdef CONFIG_DEBUG_FS
113 	struct dentry *dentry;
114 	/* lock for log buffer access */
115 	struct mutex logbuffer_lock;
116 	int logbuffer_head;
117 	int logbuffer_tail;
118 	u8 *logbuffer[LOG_BUFFER_ENTRIES];
119 #endif
120 };
121 
122 /*
123  * Logging
124  */
125 
126 #ifdef CONFIG_DEBUG_FS
127 static bool fusb302_log_full(struct fusb302_chip *chip)
128 {
129 	return chip->logbuffer_tail ==
130 		(chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
131 }
132 
133 __printf(2, 0)
134 static void _fusb302_log(struct fusb302_chip *chip, const char *fmt,
135 			 va_list args)
136 {
137 	char tmpbuffer[LOG_BUFFER_ENTRY_SIZE];
138 	u64 ts_nsec = local_clock();
139 	unsigned long rem_nsec;
140 
141 	if (!chip->logbuffer[chip->logbuffer_head]) {
142 		chip->logbuffer[chip->logbuffer_head] =
143 				kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL);
144 		if (!chip->logbuffer[chip->logbuffer_head])
145 			return;
146 	}
147 
148 	vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args);
149 
150 	mutex_lock(&chip->logbuffer_lock);
151 
152 	if (fusb302_log_full(chip)) {
153 		chip->logbuffer_head = max(chip->logbuffer_head - 1, 0);
154 		strlcpy(tmpbuffer, "overflow", sizeof(tmpbuffer));
155 	}
156 
157 	if (chip->logbuffer_head < 0 ||
158 	    chip->logbuffer_head >= LOG_BUFFER_ENTRIES) {
159 		dev_warn(chip->dev,
160 			 "Bad log buffer index %d\n", chip->logbuffer_head);
161 		goto abort;
162 	}
163 
164 	if (!chip->logbuffer[chip->logbuffer_head]) {
165 		dev_warn(chip->dev,
166 			 "Log buffer index %d is NULL\n", chip->logbuffer_head);
167 		goto abort;
168 	}
169 
170 	rem_nsec = do_div(ts_nsec, 1000000000);
171 	scnprintf(chip->logbuffer[chip->logbuffer_head],
172 		  LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s",
173 		  (unsigned long)ts_nsec, rem_nsec / 1000,
174 		  tmpbuffer);
175 	chip->logbuffer_head = (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
176 
177 abort:
178 	mutex_unlock(&chip->logbuffer_lock);
179 }
180 
181 __printf(2, 3)
182 static void fusb302_log(struct fusb302_chip *chip, const char *fmt, ...)
183 {
184 	va_list args;
185 
186 	va_start(args, fmt);
187 	_fusb302_log(chip, fmt, args);
188 	va_end(args);
189 }
190 
191 static int fusb302_debug_show(struct seq_file *s, void *v)
192 {
193 	struct fusb302_chip *chip = (struct fusb302_chip *)s->private;
194 	int tail;
195 
196 	mutex_lock(&chip->logbuffer_lock);
197 	tail = chip->logbuffer_tail;
198 	while (tail != chip->logbuffer_head) {
199 		seq_printf(s, "%s\n", chip->logbuffer[tail]);
200 		tail = (tail + 1) % LOG_BUFFER_ENTRIES;
201 	}
202 	if (!seq_has_overflowed(s))
203 		chip->logbuffer_tail = tail;
204 	mutex_unlock(&chip->logbuffer_lock);
205 
206 	return 0;
207 }
208 DEFINE_SHOW_ATTRIBUTE(fusb302_debug);
209 
210 static void fusb302_debugfs_init(struct fusb302_chip *chip)
211 {
212 	char name[NAME_MAX];
213 
214 	mutex_init(&chip->logbuffer_lock);
215 	snprintf(name, NAME_MAX, "fusb302-%s", dev_name(chip->dev));
216 	chip->dentry = debugfs_create_dir(name, usb_debug_root);
217 	debugfs_create_file("log", S_IFREG | 0444, chip->dentry, chip,
218 			    &fusb302_debug_fops);
219 }
220 
221 static void fusb302_debugfs_exit(struct fusb302_chip *chip)
222 {
223 	debugfs_remove(chip->dentry);
224 }
225 
226 #else
227 
228 static void fusb302_log(const struct fusb302_chip *chip,
229 			const char *fmt, ...) { }
230 static void fusb302_debugfs_init(const struct fusb302_chip *chip) { }
231 static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { }
232 
233 #endif
234 
235 static int fusb302_i2c_write(struct fusb302_chip *chip,
236 			     u8 address, u8 data)
237 {
238 	int ret = 0;
239 
240 	ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data);
241 	if (ret < 0)
242 		fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d",
243 			    data, address, ret);
244 
245 	return ret;
246 }
247 
248 static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address,
249 				   u8 length, const u8 *data)
250 {
251 	int ret = 0;
252 
253 	if (length <= 0)
254 		return ret;
255 
256 	ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address,
257 					     length, data);
258 	if (ret < 0)
259 		fusb302_log(chip, "cannot block write 0x%02x, len=%d, ret=%d",
260 			    address, length, ret);
261 
262 	return ret;
263 }
264 
265 static int fusb302_i2c_read(struct fusb302_chip *chip,
266 			    u8 address, u8 *data)
267 {
268 	int ret = 0;
269 
270 	ret = i2c_smbus_read_byte_data(chip->i2c_client, address);
271 	*data = (u8)ret;
272 	if (ret < 0)
273 		fusb302_log(chip, "cannot read %02x, ret=%d", address, ret);
274 
275 	return ret;
276 }
277 
278 static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address,
279 				  u8 length, u8 *data)
280 {
281 	int ret = 0;
282 
283 	if (length <= 0)
284 		return ret;
285 
286 	ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address,
287 					    length, data);
288 	if (ret < 0) {
289 		fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d",
290 			    address, length, ret);
291 		goto done;
292 	}
293 	if (ret != length) {
294 		fusb302_log(chip, "only read %d/%d bytes from 0x%02x",
295 			    ret, length, address);
296 		ret = -EIO;
297 	}
298 
299 done:
300 	return ret;
301 }
302 
303 static int fusb302_i2c_mask_write(struct fusb302_chip *chip, u8 address,
304 				  u8 mask, u8 value)
305 {
306 	int ret = 0;
307 	u8 data;
308 
309 	ret = fusb302_i2c_read(chip, address, &data);
310 	if (ret < 0)
311 		return ret;
312 	data &= ~mask;
313 	data |= value;
314 	ret = fusb302_i2c_write(chip, address, data);
315 	if (ret < 0)
316 		return ret;
317 
318 	return ret;
319 }
320 
321 static int fusb302_i2c_set_bits(struct fusb302_chip *chip, u8 address,
322 				u8 set_bits)
323 {
324 	return fusb302_i2c_mask_write(chip, address, 0x00, set_bits);
325 }
326 
327 static int fusb302_i2c_clear_bits(struct fusb302_chip *chip, u8 address,
328 				  u8 clear_bits)
329 {
330 	return fusb302_i2c_mask_write(chip, address, clear_bits, 0x00);
331 }
332 
333 static int fusb302_sw_reset(struct fusb302_chip *chip)
334 {
335 	int ret = 0;
336 
337 	ret = fusb302_i2c_write(chip, FUSB_REG_RESET,
338 				FUSB_REG_RESET_SW_RESET);
339 	if (ret < 0)
340 		fusb302_log(chip, "cannot sw reset the chip, ret=%d", ret);
341 	else
342 		fusb302_log(chip, "sw reset");
343 
344 	return ret;
345 }
346 
347 static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip, u8 retry_count)
348 {
349 	int ret = 0;
350 
351 	ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, retry_count |
352 				   FUSB_REG_CONTROL3_AUTO_RETRY);
353 
354 	return ret;
355 }
356 
357 /*
358  * initialize interrupt on the chip
359  * - unmasked interrupt: VBUS_OK
360  */
361 static int fusb302_init_interrupt(struct fusb302_chip *chip)
362 {
363 	int ret = 0;
364 
365 	ret = fusb302_i2c_write(chip, FUSB_REG_MASK,
366 				0xFF & ~FUSB_REG_MASK_VBUSOK);
367 	if (ret < 0)
368 		return ret;
369 	ret = fusb302_i2c_write(chip, FUSB_REG_MASKA, 0xFF);
370 	if (ret < 0)
371 		return ret;
372 	ret = fusb302_i2c_write(chip, FUSB_REG_MASKB, 0xFF);
373 	if (ret < 0)
374 		return ret;
375 	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL0,
376 				     FUSB_REG_CONTROL0_INT_MASK);
377 	if (ret < 0)
378 		return ret;
379 
380 	return ret;
381 }
382 
383 static int fusb302_set_power_mode(struct fusb302_chip *chip, u8 power_mode)
384 {
385 	int ret = 0;
386 
387 	ret = fusb302_i2c_write(chip, FUSB_REG_POWER, power_mode);
388 
389 	return ret;
390 }
391 
392 static int tcpm_init(struct tcpc_dev *dev)
393 {
394 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
395 						 tcpc_dev);
396 	int ret = 0;
397 	u8 data;
398 
399 	ret = fusb302_sw_reset(chip);
400 	if (ret < 0)
401 		return ret;
402 	ret = fusb302_enable_tx_auto_retries(chip, FUSB_REG_CONTROL3_N_RETRIES_3);
403 	if (ret < 0)
404 		return ret;
405 	ret = fusb302_init_interrupt(chip);
406 	if (ret < 0)
407 		return ret;
408 	ret = fusb302_set_power_mode(chip, FUSB_REG_POWER_PWR_ALL);
409 	if (ret < 0)
410 		return ret;
411 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data);
412 	if (ret < 0)
413 		return ret;
414 	chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK);
415 	ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data);
416 	if (ret < 0)
417 		return ret;
418 	fusb302_log(chip, "fusb302 device ID: 0x%02x", data);
419 
420 	return ret;
421 }
422 
423 static int tcpm_get_vbus(struct tcpc_dev *dev)
424 {
425 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
426 						 tcpc_dev);
427 	int ret = 0;
428 
429 	mutex_lock(&chip->lock);
430 	ret = chip->vbus_present ? 1 : 0;
431 	mutex_unlock(&chip->lock);
432 
433 	return ret;
434 }
435 
436 static int tcpm_get_current_limit(struct tcpc_dev *dev)
437 {
438 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
439 						 tcpc_dev);
440 	int current_limit = 0;
441 	unsigned long timeout;
442 
443 	if (!chip->extcon)
444 		return 0;
445 
446 	/*
447 	 * USB2 Charger detection may still be in progress when we get here,
448 	 * this can take upto 600ms, wait 800ms max.
449 	 */
450 	timeout = jiffies + msecs_to_jiffies(800);
451 	do {
452 		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_SDP) == 1)
453 			current_limit = 500;
454 
455 		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_CDP) == 1 ||
456 		    extcon_get_state(chip->extcon, EXTCON_CHG_USB_ACA) == 1)
457 			current_limit = 1500;
458 
459 		if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_DCP) == 1)
460 			current_limit = 2000;
461 
462 		msleep(50);
463 	} while (current_limit == 0 && time_before(jiffies, timeout));
464 
465 	return current_limit;
466 }
467 
468 static int fusb302_set_src_current(struct fusb302_chip *chip,
469 				   enum src_current_status status)
470 {
471 	int ret = 0;
472 
473 	chip->src_current_status = status;
474 	switch (status) {
475 	case SRC_CURRENT_DEFAULT:
476 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
477 					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
478 					     FUSB_REG_CONTROL0_HOST_CUR_DEF);
479 		break;
480 	case SRC_CURRENT_MEDIUM:
481 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
482 					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
483 					     FUSB_REG_CONTROL0_HOST_CUR_MED);
484 		break;
485 	case SRC_CURRENT_HIGH:
486 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
487 					     FUSB_REG_CONTROL0_HOST_CUR_MASK,
488 					     FUSB_REG_CONTROL0_HOST_CUR_HIGH);
489 		break;
490 	default:
491 		break;
492 	}
493 
494 	return ret;
495 }
496 
497 static int fusb302_set_toggling(struct fusb302_chip *chip,
498 				enum toggling_mode mode)
499 {
500 	int ret = 0;
501 
502 	/* first disable toggling */
503 	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2,
504 				     FUSB_REG_CONTROL2_TOGGLE);
505 	if (ret < 0)
506 		return ret;
507 	/* mask interrupts for SRC or SNK */
508 	ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASK,
509 				   FUSB_REG_MASK_BC_LVL |
510 				   FUSB_REG_MASK_COMP_CHNG);
511 	if (ret < 0)
512 		return ret;
513 	chip->intr_bc_lvl = false;
514 	chip->intr_comp_chng = false;
515 	/* configure toggling mode: none/snk/src/drp */
516 	switch (mode) {
517 	case TOGGLING_MODE_OFF:
518 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
519 					     FUSB_REG_CONTROL2_MODE_MASK,
520 					     FUSB_REG_CONTROL2_MODE_NONE);
521 		if (ret < 0)
522 			return ret;
523 		break;
524 	case TOGGLING_MODE_SNK:
525 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
526 					     FUSB_REG_CONTROL2_MODE_MASK,
527 					     FUSB_REG_CONTROL2_MODE_UFP);
528 		if (ret < 0)
529 			return ret;
530 		break;
531 	case TOGGLING_MODE_SRC:
532 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
533 					     FUSB_REG_CONTROL2_MODE_MASK,
534 					     FUSB_REG_CONTROL2_MODE_DFP);
535 		if (ret < 0)
536 			return ret;
537 		break;
538 	case TOGGLING_MODE_DRP:
539 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
540 					     FUSB_REG_CONTROL2_MODE_MASK,
541 					     FUSB_REG_CONTROL2_MODE_DRP);
542 		if (ret < 0)
543 			return ret;
544 		break;
545 	default:
546 		break;
547 	}
548 
549 	if (mode == TOGGLING_MODE_OFF) {
550 		/* mask TOGDONE interrupt */
551 		ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASKA,
552 					   FUSB_REG_MASKA_TOGDONE);
553 		if (ret < 0)
554 			return ret;
555 		chip->intr_togdone = false;
556 	} else {
557 		/* Datasheet says vconn MUST be off when toggling */
558 		WARN(chip->vconn_on, "Vconn is on during toggle start");
559 		/* unmask TOGDONE interrupt */
560 		ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA,
561 					     FUSB_REG_MASKA_TOGDONE);
562 		if (ret < 0)
563 			return ret;
564 		chip->intr_togdone = true;
565 		/* start toggling */
566 		ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL2,
567 					   FUSB_REG_CONTROL2_TOGGLE);
568 		if (ret < 0)
569 			return ret;
570 		/* during toggling, consider cc as Open */
571 		chip->cc1 = TYPEC_CC_OPEN;
572 		chip->cc2 = TYPEC_CC_OPEN;
573 	}
574 	chip->toggling_mode = mode;
575 
576 	return ret;
577 }
578 
579 static const char * const typec_cc_status_name[] = {
580 	[TYPEC_CC_OPEN]		= "Open",
581 	[TYPEC_CC_RA]		= "Ra",
582 	[TYPEC_CC_RD]		= "Rd",
583 	[TYPEC_CC_RP_DEF]	= "Rp-def",
584 	[TYPEC_CC_RP_1_5]	= "Rp-1.5",
585 	[TYPEC_CC_RP_3_0]	= "Rp-3.0",
586 };
587 
588 static const enum src_current_status cc_src_current[] = {
589 	[TYPEC_CC_OPEN]		= SRC_CURRENT_DEFAULT,
590 	[TYPEC_CC_RA]		= SRC_CURRENT_DEFAULT,
591 	[TYPEC_CC_RD]		= SRC_CURRENT_DEFAULT,
592 	[TYPEC_CC_RP_DEF]	= SRC_CURRENT_DEFAULT,
593 	[TYPEC_CC_RP_1_5]	= SRC_CURRENT_MEDIUM,
594 	[TYPEC_CC_RP_3_0]	= SRC_CURRENT_HIGH,
595 };
596 
597 static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
598 {
599 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
600 						 tcpc_dev);
601 	u8 switches0_mask = FUSB_REG_SWITCHES0_CC1_PU_EN |
602 			    FUSB_REG_SWITCHES0_CC2_PU_EN |
603 			    FUSB_REG_SWITCHES0_CC1_PD_EN |
604 			    FUSB_REG_SWITCHES0_CC2_PD_EN;
605 	u8 rd_mda, switches0_data = 0x00;
606 	int ret = 0;
607 
608 	mutex_lock(&chip->lock);
609 	switch (cc) {
610 	case TYPEC_CC_OPEN:
611 		break;
612 	case TYPEC_CC_RD:
613 		switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
614 				  FUSB_REG_SWITCHES0_CC2_PD_EN;
615 		break;
616 	case TYPEC_CC_RP_DEF:
617 	case TYPEC_CC_RP_1_5:
618 	case TYPEC_CC_RP_3_0:
619 		switches0_data |= (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
620 				  FUSB_REG_SWITCHES0_CC1_PU_EN :
621 				  FUSB_REG_SWITCHES0_CC2_PU_EN;
622 		break;
623 	default:
624 		fusb302_log(chip, "unsupported cc value %s",
625 			    typec_cc_status_name[cc]);
626 		ret = -EINVAL;
627 		goto done;
628 	}
629 
630 	fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]);
631 
632 	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
633 	if (ret < 0) {
634 		fusb302_log(chip, "cannot set toggling mode, ret=%d", ret);
635 		goto done;
636 	}
637 
638 	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
639 				     switches0_mask, switches0_data);
640 	if (ret < 0) {
641 		fusb302_log(chip, "cannot set pull-up/-down, ret = %d", ret);
642 		goto done;
643 	}
644 	/* reset the cc status */
645 	chip->cc1 = TYPEC_CC_OPEN;
646 	chip->cc2 = TYPEC_CC_OPEN;
647 
648 	/* adjust current for SRC */
649 	ret = fusb302_set_src_current(chip, cc_src_current[cc]);
650 	if (ret < 0) {
651 		fusb302_log(chip, "cannot set src current %s, ret=%d",
652 			    typec_cc_status_name[cc], ret);
653 		goto done;
654 	}
655 
656 	/* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */
657 	switch (cc) {
658 	case TYPEC_CC_RP_DEF:
659 	case TYPEC_CC_RP_1_5:
660 	case TYPEC_CC_RP_3_0:
661 		rd_mda = rd_mda_value[cc_src_current[cc]];
662 		ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
663 		if (ret < 0) {
664 			fusb302_log(chip,
665 				    "cannot set SRC measure value, ret=%d",
666 				    ret);
667 			goto done;
668 		}
669 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
670 					     FUSB_REG_MASK_BC_LVL |
671 					     FUSB_REG_MASK_COMP_CHNG,
672 					     FUSB_REG_MASK_COMP_CHNG);
673 		if (ret < 0) {
674 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
675 				    ret);
676 			goto done;
677 		}
678 		chip->intr_comp_chng = true;
679 		break;
680 	case TYPEC_CC_RD:
681 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
682 					     FUSB_REG_MASK_BC_LVL |
683 					     FUSB_REG_MASK_COMP_CHNG,
684 					     FUSB_REG_MASK_BC_LVL);
685 		if (ret < 0) {
686 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
687 				    ret);
688 			goto done;
689 		}
690 		chip->intr_bc_lvl = true;
691 		break;
692 	default:
693 		break;
694 	}
695 done:
696 	mutex_unlock(&chip->lock);
697 
698 	return ret;
699 }
700 
701 static int tcpm_get_cc(struct tcpc_dev *dev, enum typec_cc_status *cc1,
702 		       enum typec_cc_status *cc2)
703 {
704 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
705 						 tcpc_dev);
706 
707 	mutex_lock(&chip->lock);
708 	*cc1 = chip->cc1;
709 	*cc2 = chip->cc2;
710 	fusb302_log(chip, "cc1=%s, cc2=%s", typec_cc_status_name[*cc1],
711 		    typec_cc_status_name[*cc2]);
712 	mutex_unlock(&chip->lock);
713 
714 	return 0;
715 }
716 
717 static int tcpm_set_polarity(struct tcpc_dev *dev,
718 			     enum typec_cc_polarity polarity)
719 {
720 	return 0;
721 }
722 
723 static int tcpm_set_vconn(struct tcpc_dev *dev, bool on)
724 {
725 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
726 						 tcpc_dev);
727 	int ret = 0;
728 	u8 switches0_data = 0x00;
729 	u8 switches0_mask = FUSB_REG_SWITCHES0_VCONN_CC1 |
730 			    FUSB_REG_SWITCHES0_VCONN_CC2;
731 
732 	mutex_lock(&chip->lock);
733 	if (chip->vconn_on == on) {
734 		fusb302_log(chip, "vconn is already %s", on ? "On" : "Off");
735 		goto done;
736 	}
737 	if (on) {
738 		switches0_data = (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
739 				 FUSB_REG_SWITCHES0_VCONN_CC2 :
740 				 FUSB_REG_SWITCHES0_VCONN_CC1;
741 	}
742 	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
743 				     switches0_mask, switches0_data);
744 	if (ret < 0)
745 		goto done;
746 	chip->vconn_on = on;
747 	fusb302_log(chip, "vconn := %s", on ? "On" : "Off");
748 done:
749 	mutex_unlock(&chip->lock);
750 
751 	return ret;
752 }
753 
754 static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge)
755 {
756 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
757 						 tcpc_dev);
758 	int ret = 0;
759 
760 	mutex_lock(&chip->lock);
761 	if (chip->vbus_on == on) {
762 		fusb302_log(chip, "vbus is already %s", on ? "On" : "Off");
763 	} else {
764 		if (on)
765 			ret = regulator_enable(chip->vbus);
766 		else
767 			ret = regulator_disable(chip->vbus);
768 		if (ret < 0) {
769 			fusb302_log(chip, "cannot %s vbus regulator, ret=%d",
770 				    on ? "enable" : "disable", ret);
771 			goto done;
772 		}
773 		chip->vbus_on = on;
774 		fusb302_log(chip, "vbus := %s", on ? "On" : "Off");
775 	}
776 	if (chip->charge_on == charge)
777 		fusb302_log(chip, "charge is already %s",
778 			    charge ? "On" : "Off");
779 	else
780 		chip->charge_on = charge;
781 
782 done:
783 	mutex_unlock(&chip->lock);
784 
785 	return ret;
786 }
787 
788 static int fusb302_pd_tx_flush(struct fusb302_chip *chip)
789 {
790 	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL0,
791 				    FUSB_REG_CONTROL0_TX_FLUSH);
792 }
793 
794 static int fusb302_pd_rx_flush(struct fusb302_chip *chip)
795 {
796 	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL1,
797 				    FUSB_REG_CONTROL1_RX_FLUSH);
798 }
799 
800 static int fusb302_pd_set_auto_goodcrc(struct fusb302_chip *chip, bool on)
801 {
802 	if (on)
803 		return fusb302_i2c_set_bits(chip, FUSB_REG_SWITCHES1,
804 					    FUSB_REG_SWITCHES1_AUTO_GCRC);
805 	return fusb302_i2c_clear_bits(chip, FUSB_REG_SWITCHES1,
806 					    FUSB_REG_SWITCHES1_AUTO_GCRC);
807 }
808 
809 static int fusb302_pd_set_interrupts(struct fusb302_chip *chip, bool on)
810 {
811 	int ret = 0;
812 	u8 mask_interrupts = FUSB_REG_MASK_COLLISION;
813 	u8 maska_interrupts = FUSB_REG_MASKA_RETRYFAIL |
814 			      FUSB_REG_MASKA_HARDSENT |
815 			      FUSB_REG_MASKA_TX_SUCCESS |
816 			      FUSB_REG_MASKA_HARDRESET;
817 	u8 maskb_interrupts = FUSB_REG_MASKB_GCRCSENT;
818 
819 	ret = on ?
820 		fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, mask_interrupts) :
821 		fusb302_i2c_set_bits(chip, FUSB_REG_MASK, mask_interrupts);
822 	if (ret < 0)
823 		return ret;
824 	ret = on ?
825 		fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, maska_interrupts) :
826 		fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, maska_interrupts);
827 	if (ret < 0)
828 		return ret;
829 	ret = on ?
830 		fusb302_i2c_clear_bits(chip, FUSB_REG_MASKB, maskb_interrupts) :
831 		fusb302_i2c_set_bits(chip, FUSB_REG_MASKB, maskb_interrupts);
832 	return ret;
833 }
834 
835 static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on)
836 {
837 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
838 						 tcpc_dev);
839 	int ret = 0;
840 
841 	mutex_lock(&chip->lock);
842 	ret = fusb302_pd_rx_flush(chip);
843 	if (ret < 0) {
844 		fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret);
845 		goto done;
846 	}
847 	ret = fusb302_pd_tx_flush(chip);
848 	if (ret < 0) {
849 		fusb302_log(chip, "cannot flush pd tx buffer, ret=%d", ret);
850 		goto done;
851 	}
852 	ret = fusb302_pd_set_auto_goodcrc(chip, on);
853 	if (ret < 0) {
854 		fusb302_log(chip, "cannot turn %s auto GCRC, ret=%d",
855 			    on ? "on" : "off", ret);
856 		goto done;
857 	}
858 	ret = fusb302_pd_set_interrupts(chip, on);
859 	if (ret < 0) {
860 		fusb302_log(chip, "cannot turn %s pd interrupts, ret=%d",
861 			    on ? "on" : "off", ret);
862 		goto done;
863 	}
864 	fusb302_log(chip, "pd := %s", on ? "on" : "off");
865 done:
866 	mutex_unlock(&chip->lock);
867 
868 	return ret;
869 }
870 
871 static const char * const typec_role_name[] = {
872 	[TYPEC_SINK]		= "Sink",
873 	[TYPEC_SOURCE]		= "Source",
874 };
875 
876 static const char * const typec_data_role_name[] = {
877 	[TYPEC_DEVICE]		= "Device",
878 	[TYPEC_HOST]		= "Host",
879 };
880 
881 static int tcpm_set_roles(struct tcpc_dev *dev, bool attached,
882 			  enum typec_role pwr, enum typec_data_role data)
883 {
884 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
885 						 tcpc_dev);
886 	int ret = 0;
887 	u8 switches1_mask = FUSB_REG_SWITCHES1_POWERROLE |
888 			    FUSB_REG_SWITCHES1_DATAROLE;
889 	u8 switches1_data = 0x00;
890 
891 	mutex_lock(&chip->lock);
892 	if (pwr == TYPEC_SOURCE)
893 		switches1_data |= FUSB_REG_SWITCHES1_POWERROLE;
894 	if (data == TYPEC_HOST)
895 		switches1_data |= FUSB_REG_SWITCHES1_DATAROLE;
896 	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
897 				     switches1_mask, switches1_data);
898 	if (ret < 0) {
899 		fusb302_log(chip, "unable to set pd header %s, %s, ret=%d",
900 			    typec_role_name[pwr], typec_data_role_name[data],
901 			    ret);
902 		goto done;
903 	}
904 	fusb302_log(chip, "pd header := %s, %s", typec_role_name[pwr],
905 		    typec_data_role_name[data]);
906 done:
907 	mutex_unlock(&chip->lock);
908 
909 	return ret;
910 }
911 
912 static int tcpm_start_toggling(struct tcpc_dev *dev,
913 			       enum typec_port_type port_type,
914 			       enum typec_cc_status cc)
915 {
916 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
917 						 tcpc_dev);
918 	enum toggling_mode mode = TOGGLING_MODE_OFF;
919 	int ret = 0;
920 
921 	switch (port_type) {
922 	case TYPEC_PORT_SRC:
923 		mode = TOGGLING_MODE_SRC;
924 		break;
925 	case TYPEC_PORT_SNK:
926 		mode = TOGGLING_MODE_SNK;
927 		break;
928 	case TYPEC_PORT_DRP:
929 		mode = TOGGLING_MODE_DRP;
930 		break;
931 	}
932 
933 	mutex_lock(&chip->lock);
934 	ret = fusb302_set_src_current(chip, cc_src_current[cc]);
935 	if (ret < 0) {
936 		fusb302_log(chip, "unable to set src current %s, ret=%d",
937 			    typec_cc_status_name[cc], ret);
938 		goto done;
939 	}
940 	ret = fusb302_set_toggling(chip, mode);
941 	if (ret < 0) {
942 		fusb302_log(chip,
943 			    "unable to start drp toggling, ret=%d", ret);
944 		goto done;
945 	}
946 	fusb302_log(chip, "start drp toggling");
947 done:
948 	mutex_unlock(&chip->lock);
949 
950 	return ret;
951 }
952 
953 static int fusb302_pd_send_message(struct fusb302_chip *chip,
954 				   const struct pd_message *msg)
955 {
956 	int ret = 0;
957 	u8 buf[40];
958 	u8 pos = 0;
959 	int len;
960 
961 	/* SOP tokens */
962 	buf[pos++] = FUSB302_TKN_SYNC1;
963 	buf[pos++] = FUSB302_TKN_SYNC1;
964 	buf[pos++] = FUSB302_TKN_SYNC1;
965 	buf[pos++] = FUSB302_TKN_SYNC2;
966 
967 	len = pd_header_cnt_le(msg->header) * 4;
968 	/* plug 2 for header */
969 	len += 2;
970 	if (len > 0x1F) {
971 		fusb302_log(chip,
972 			    "PD message too long %d (incl. header)", len);
973 		return -EINVAL;
974 	}
975 	/* packsym tells the FUSB302 chip that the next X bytes are payload */
976 	buf[pos++] = FUSB302_TKN_PACKSYM | (len & 0x1F);
977 	memcpy(&buf[pos], &msg->header, sizeof(msg->header));
978 	pos += sizeof(msg->header);
979 
980 	len -= 2;
981 	memcpy(&buf[pos], msg->payload, len);
982 	pos += len;
983 
984 	/* CRC */
985 	buf[pos++] = FUSB302_TKN_JAMCRC;
986 	/* EOP */
987 	buf[pos++] = FUSB302_TKN_EOP;
988 	/* turn tx off after sending message */
989 	buf[pos++] = FUSB302_TKN_TXOFF;
990 	/* start transmission */
991 	buf[pos++] = FUSB302_TKN_TXON;
992 
993 	ret = fusb302_i2c_block_write(chip, FUSB_REG_FIFOS, pos, buf);
994 	if (ret < 0)
995 		return ret;
996 	fusb302_log(chip, "sending PD message header: %x", msg->header);
997 	fusb302_log(chip, "sending PD message len: %d", len);
998 
999 	return ret;
1000 }
1001 
1002 static int fusb302_pd_send_hardreset(struct fusb302_chip *chip)
1003 {
1004 	return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3,
1005 				    FUSB_REG_CONTROL3_SEND_HARDRESET);
1006 }
1007 
1008 static const char * const transmit_type_name[] = {
1009 	[TCPC_TX_SOP]			= "SOP",
1010 	[TCPC_TX_SOP_PRIME]		= "SOP'",
1011 	[TCPC_TX_SOP_PRIME_PRIME]	= "SOP''",
1012 	[TCPC_TX_SOP_DEBUG_PRIME]	= "DEBUG'",
1013 	[TCPC_TX_SOP_DEBUG_PRIME_PRIME]	= "DEBUG''",
1014 	[TCPC_TX_HARD_RESET]		= "HARD_RESET",
1015 	[TCPC_TX_CABLE_RESET]		= "CABLE_RESET",
1016 	[TCPC_TX_BIST_MODE_2]		= "BIST_MODE_2",
1017 };
1018 
1019 static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type,
1020 			    const struct pd_message *msg, unsigned int negotiated_rev)
1021 {
1022 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
1023 						 tcpc_dev);
1024 	int ret = 0;
1025 
1026 	mutex_lock(&chip->lock);
1027 	switch (type) {
1028 	case TCPC_TX_SOP:
1029 		/* nRetryCount 3 in P2.0 spec, whereas 2 in PD3.0 spec */
1030 		ret = fusb302_enable_tx_auto_retries(chip, negotiated_rev > PD_REV20 ?
1031 						     FUSB_REG_CONTROL3_N_RETRIES_2 :
1032 						     FUSB_REG_CONTROL3_N_RETRIES_3);
1033 		if (ret < 0)
1034 			fusb302_log(chip, "Cannot update retry count ret=%d", ret);
1035 
1036 		ret = fusb302_pd_send_message(chip, msg);
1037 		if (ret < 0)
1038 			fusb302_log(chip,
1039 				    "cannot send PD message, ret=%d", ret);
1040 		break;
1041 	case TCPC_TX_HARD_RESET:
1042 		ret = fusb302_pd_send_hardreset(chip);
1043 		if (ret < 0)
1044 			fusb302_log(chip,
1045 				    "cannot send hardreset, ret=%d", ret);
1046 		break;
1047 	default:
1048 		fusb302_log(chip, "type %s not supported",
1049 			    transmit_type_name[type]);
1050 		ret = -EINVAL;
1051 	}
1052 	mutex_unlock(&chip->lock);
1053 
1054 	return ret;
1055 }
1056 
1057 static enum typec_cc_status fusb302_bc_lvl_to_cc(u8 bc_lvl)
1058 {
1059 	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_1230_MAX)
1060 		return TYPEC_CC_RP_3_0;
1061 	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_600_1230)
1062 		return TYPEC_CC_RP_1_5;
1063 	if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_200_600)
1064 		return TYPEC_CC_RP_DEF;
1065 	return TYPEC_CC_OPEN;
1066 }
1067 
1068 static void fusb302_bc_lvl_handler_work(struct work_struct *work)
1069 {
1070 	struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
1071 						 bc_lvl_handler.work);
1072 	int ret = 0;
1073 	u8 status0;
1074 	u8 bc_lvl;
1075 	enum typec_cc_status cc_status;
1076 
1077 	mutex_lock(&chip->lock);
1078 	if (!chip->intr_bc_lvl) {
1079 		fusb302_log(chip, "BC_LVL interrupt is turned off, abort");
1080 		goto done;
1081 	}
1082 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1083 	if (ret < 0)
1084 		goto done;
1085 	fusb302_log(chip, "BC_LVL handler, status0=0x%02x", status0);
1086 	if (status0 & FUSB_REG_STATUS0_ACTIVITY) {
1087 		fusb302_log(chip, "CC activities detected, delay handling");
1088 		mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
1089 				 msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
1090 		goto done;
1091 	}
1092 	bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
1093 	cc_status = fusb302_bc_lvl_to_cc(bc_lvl);
1094 	if (chip->cc_polarity == TYPEC_POLARITY_CC1) {
1095 		if (chip->cc1 != cc_status) {
1096 			fusb302_log(chip, "cc1: %s -> %s",
1097 				    typec_cc_status_name[chip->cc1],
1098 				    typec_cc_status_name[cc_status]);
1099 			chip->cc1 = cc_status;
1100 			tcpm_cc_change(chip->tcpm_port);
1101 		}
1102 	} else {
1103 		if (chip->cc2 != cc_status) {
1104 			fusb302_log(chip, "cc2: %s -> %s",
1105 				    typec_cc_status_name[chip->cc2],
1106 				    typec_cc_status_name[cc_status]);
1107 			chip->cc2 = cc_status;
1108 			tcpm_cc_change(chip->tcpm_port);
1109 		}
1110 	}
1111 
1112 done:
1113 	mutex_unlock(&chip->lock);
1114 }
1115 
1116 static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev)
1117 {
1118 	fusb302_tcpc_dev->init = tcpm_init;
1119 	fusb302_tcpc_dev->get_vbus = tcpm_get_vbus;
1120 	fusb302_tcpc_dev->get_current_limit = tcpm_get_current_limit;
1121 	fusb302_tcpc_dev->set_cc = tcpm_set_cc;
1122 	fusb302_tcpc_dev->get_cc = tcpm_get_cc;
1123 	fusb302_tcpc_dev->set_polarity = tcpm_set_polarity;
1124 	fusb302_tcpc_dev->set_vconn = tcpm_set_vconn;
1125 	fusb302_tcpc_dev->set_vbus = tcpm_set_vbus;
1126 	fusb302_tcpc_dev->set_pd_rx = tcpm_set_pd_rx;
1127 	fusb302_tcpc_dev->set_roles = tcpm_set_roles;
1128 	fusb302_tcpc_dev->start_toggling = tcpm_start_toggling;
1129 	fusb302_tcpc_dev->pd_transmit = tcpm_pd_transmit;
1130 }
1131 
1132 static const char * const cc_polarity_name[] = {
1133 	[TYPEC_POLARITY_CC1]	= "Polarity_CC1",
1134 	[TYPEC_POLARITY_CC2]	= "Polarity_CC2",
1135 };
1136 
1137 static int fusb302_set_cc_polarity_and_pull(struct fusb302_chip *chip,
1138 					    enum typec_cc_polarity cc_polarity,
1139 					    bool pull_up, bool pull_down)
1140 {
1141 	int ret = 0;
1142 	u8 switches0_data = 0x00;
1143 	u8 switches1_mask = FUSB_REG_SWITCHES1_TXCC1_EN |
1144 			    FUSB_REG_SWITCHES1_TXCC2_EN;
1145 	u8 switches1_data = 0x00;
1146 
1147 	if (pull_down)
1148 		switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
1149 				  FUSB_REG_SWITCHES0_CC2_PD_EN;
1150 
1151 	if (cc_polarity == TYPEC_POLARITY_CC1) {
1152 		switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC1;
1153 		if (chip->vconn_on)
1154 			switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC2;
1155 		if (pull_up)
1156 			switches0_data |= FUSB_REG_SWITCHES0_CC1_PU_EN;
1157 		switches1_data = FUSB_REG_SWITCHES1_TXCC1_EN;
1158 	} else {
1159 		switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC2;
1160 		if (chip->vconn_on)
1161 			switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC1;
1162 		if (pull_up)
1163 			switches0_data |= FUSB_REG_SWITCHES0_CC2_PU_EN;
1164 		switches1_data = FUSB_REG_SWITCHES1_TXCC2_EN;
1165 	}
1166 	ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
1167 	if (ret < 0)
1168 		return ret;
1169 	ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
1170 				     switches1_mask, switches1_data);
1171 	if (ret < 0)
1172 		return ret;
1173 	chip->cc_polarity = cc_polarity;
1174 
1175 	return ret;
1176 }
1177 
1178 static int fusb302_handle_togdone_snk(struct fusb302_chip *chip,
1179 				      u8 togdone_result)
1180 {
1181 	int ret = 0;
1182 	u8 status0;
1183 	u8 bc_lvl;
1184 	enum typec_cc_polarity cc_polarity;
1185 	enum typec_cc_status cc_status_active, cc1, cc2;
1186 
1187 	/* set polarity and pull_up, pull_down */
1188 	cc_polarity = (togdone_result == FUSB_REG_STATUS1A_TOGSS_SNK1) ?
1189 		      TYPEC_POLARITY_CC1 : TYPEC_POLARITY_CC2;
1190 	ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, false, true);
1191 	if (ret < 0) {
1192 		fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
1193 			    cc_polarity_name[cc_polarity], ret);
1194 		return ret;
1195 	}
1196 	/* fusb302_set_cc_polarity() has set the correct measure block */
1197 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1198 	if (ret < 0)
1199 		return ret;
1200 	bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
1201 	cc_status_active = fusb302_bc_lvl_to_cc(bc_lvl);
1202 	/* restart toggling if the cc status on the active line is OPEN */
1203 	if (cc_status_active == TYPEC_CC_OPEN) {
1204 		fusb302_log(chip, "restart toggling as CC_OPEN detected");
1205 		ret = fusb302_set_toggling(chip, chip->toggling_mode);
1206 		return ret;
1207 	}
1208 	/* update tcpm with the new cc value */
1209 	cc1 = (cc_polarity == TYPEC_POLARITY_CC1) ?
1210 	      cc_status_active : TYPEC_CC_OPEN;
1211 	cc2 = (cc_polarity == TYPEC_POLARITY_CC2) ?
1212 	      cc_status_active : TYPEC_CC_OPEN;
1213 	if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
1214 		chip->cc1 = cc1;
1215 		chip->cc2 = cc2;
1216 		tcpm_cc_change(chip->tcpm_port);
1217 	}
1218 	/* turn off toggling */
1219 	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
1220 	if (ret < 0) {
1221 		fusb302_log(chip,
1222 			    "cannot set toggling mode off, ret=%d", ret);
1223 		return ret;
1224 	}
1225 	/* unmask bc_lvl interrupt */
1226 	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL);
1227 	if (ret < 0) {
1228 		fusb302_log(chip,
1229 			    "cannot unmask bc_lcl interrupt, ret=%d", ret);
1230 		return ret;
1231 	}
1232 	chip->intr_bc_lvl = true;
1233 	fusb302_log(chip, "detected cc1=%s, cc2=%s",
1234 		    typec_cc_status_name[cc1],
1235 		    typec_cc_status_name[cc2]);
1236 
1237 	return ret;
1238 }
1239 
1240 /* On error returns < 0, otherwise a typec_cc_status value */
1241 static int fusb302_get_src_cc_status(struct fusb302_chip *chip,
1242 				     enum typec_cc_polarity cc_polarity,
1243 				     enum typec_cc_status *cc)
1244 {
1245 	u8 ra_mda = ra_mda_value[chip->src_current_status];
1246 	u8 rd_mda = rd_mda_value[chip->src_current_status];
1247 	u8 switches0_data, status0;
1248 	int ret;
1249 
1250 	/* Step 1: Set switches so that we measure the right CC pin */
1251 	switches0_data = (cc_polarity == TYPEC_POLARITY_CC1) ?
1252 		FUSB_REG_SWITCHES0_CC1_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC1 :
1253 		FUSB_REG_SWITCHES0_CC2_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC2;
1254 	ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
1255 	if (ret < 0)
1256 		return ret;
1257 
1258 	fusb302_i2c_read(chip, FUSB_REG_SWITCHES0, &status0);
1259 	fusb302_log(chip, "get_src_cc_status switches: 0x%0x", status0);
1260 
1261 	/* Step 2: Set compararator volt to differentiate between Open and Rd */
1262 	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
1263 	if (ret < 0)
1264 		return ret;
1265 
1266 	usleep_range(50, 100);
1267 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1268 	if (ret < 0)
1269 		return ret;
1270 
1271 	fusb302_log(chip, "get_src_cc_status rd_mda status0: 0x%0x", status0);
1272 	if (status0 & FUSB_REG_STATUS0_COMP) {
1273 		*cc = TYPEC_CC_OPEN;
1274 		return 0;
1275 	}
1276 
1277 	/* Step 3: Set compararator input to differentiate between Rd and Ra. */
1278 	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, ra_mda);
1279 	if (ret < 0)
1280 		return ret;
1281 
1282 	usleep_range(50, 100);
1283 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1284 	if (ret < 0)
1285 		return ret;
1286 
1287 	fusb302_log(chip, "get_src_cc_status ra_mda status0: 0x%0x", status0);
1288 	if (status0 & FUSB_REG_STATUS0_COMP)
1289 		*cc = TYPEC_CC_RD;
1290 	else
1291 		*cc = TYPEC_CC_RA;
1292 
1293 	return 0;
1294 }
1295 
1296 static int fusb302_handle_togdone_src(struct fusb302_chip *chip,
1297 				      u8 togdone_result)
1298 {
1299 	/*
1300 	 * - set polarity (measure cc, vconn, tx)
1301 	 * - set pull_up, pull_down
1302 	 * - set cc1, cc2, and update to tcpm_port
1303 	 * - set I_COMP interrupt on
1304 	 */
1305 	int ret = 0;
1306 	u8 rd_mda = rd_mda_value[chip->src_current_status];
1307 	enum toggling_mode toggling_mode = chip->toggling_mode;
1308 	enum typec_cc_polarity cc_polarity;
1309 	enum typec_cc_status cc1, cc2;
1310 
1311 	/*
1312 	 * The toggle-engine will stop in a src state if it sees either Ra or
1313 	 * Rd. Determine the status for both CC pins, starting with the one
1314 	 * where toggling stopped, as that is where the switches point now.
1315 	 */
1316 	if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
1317 		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
1318 	else
1319 		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
1320 	if (ret < 0)
1321 		return ret;
1322 	/* we must turn off toggling before we can measure the other pin */
1323 	ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
1324 	if (ret < 0) {
1325 		fusb302_log(chip, "cannot set toggling mode off, ret=%d", ret);
1326 		return ret;
1327 	}
1328 	/* get the status of the other pin */
1329 	if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
1330 		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
1331 	else
1332 		ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
1333 	if (ret < 0)
1334 		return ret;
1335 
1336 	/* determine polarity based on the status of both pins */
1337 	if (cc1 == TYPEC_CC_RD &&
1338 			(cc2 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_RA)) {
1339 		cc_polarity = TYPEC_POLARITY_CC1;
1340 	} else if (cc2 == TYPEC_CC_RD &&
1341 		    (cc1 == TYPEC_CC_OPEN || cc1 == TYPEC_CC_RA)) {
1342 		cc_polarity = TYPEC_POLARITY_CC2;
1343 	} else {
1344 		fusb302_log(chip, "unexpected CC status cc1=%s, cc2=%s, restarting toggling",
1345 			    typec_cc_status_name[cc1],
1346 			    typec_cc_status_name[cc2]);
1347 		return fusb302_set_toggling(chip, toggling_mode);
1348 	}
1349 	/* set polarity and pull_up, pull_down */
1350 	ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, true, false);
1351 	if (ret < 0) {
1352 		fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
1353 			    cc_polarity_name[cc_polarity], ret);
1354 		return ret;
1355 	}
1356 	/* update tcpm with the new cc value */
1357 	if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
1358 		chip->cc1 = cc1;
1359 		chip->cc2 = cc2;
1360 		tcpm_cc_change(chip->tcpm_port);
1361 	}
1362 	/* set MDAC to Rd threshold, and unmask I_COMP for unplug detection */
1363 	ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
1364 	if (ret < 0)
1365 		return ret;
1366 	/* unmask comp_chng interrupt */
1367 	ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK,
1368 				     FUSB_REG_MASK_COMP_CHNG);
1369 	if (ret < 0) {
1370 		fusb302_log(chip,
1371 			    "cannot unmask comp_chng interrupt, ret=%d", ret);
1372 		return ret;
1373 	}
1374 	chip->intr_comp_chng = true;
1375 	fusb302_log(chip, "detected cc1=%s, cc2=%s",
1376 		    typec_cc_status_name[cc1],
1377 		    typec_cc_status_name[cc2]);
1378 
1379 	return ret;
1380 }
1381 
1382 static int fusb302_handle_togdone(struct fusb302_chip *chip)
1383 {
1384 	int ret = 0;
1385 	u8 status1a;
1386 	u8 togdone_result;
1387 
1388 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS1A, &status1a);
1389 	if (ret < 0)
1390 		return ret;
1391 	togdone_result = (status1a >> FUSB_REG_STATUS1A_TOGSS_POS) &
1392 			 FUSB_REG_STATUS1A_TOGSS_MASK;
1393 	switch (togdone_result) {
1394 	case FUSB_REG_STATUS1A_TOGSS_SNK1:
1395 	case FUSB_REG_STATUS1A_TOGSS_SNK2:
1396 		return fusb302_handle_togdone_snk(chip, togdone_result);
1397 	case FUSB_REG_STATUS1A_TOGSS_SRC1:
1398 	case FUSB_REG_STATUS1A_TOGSS_SRC2:
1399 		return fusb302_handle_togdone_src(chip, togdone_result);
1400 	case FUSB_REG_STATUS1A_TOGSS_AA:
1401 		/* doesn't support */
1402 		fusb302_log(chip, "AudioAccessory not supported");
1403 		fusb302_set_toggling(chip, chip->toggling_mode);
1404 		break;
1405 	default:
1406 		fusb302_log(chip, "TOGDONE with an invalid state: %d",
1407 			    togdone_result);
1408 		fusb302_set_toggling(chip, chip->toggling_mode);
1409 		break;
1410 	}
1411 	return ret;
1412 }
1413 
1414 static int fusb302_pd_reset(struct fusb302_chip *chip)
1415 {
1416 	return fusb302_i2c_set_bits(chip, FUSB_REG_RESET,
1417 				    FUSB_REG_RESET_PD_RESET);
1418 }
1419 
1420 static int fusb302_pd_read_message(struct fusb302_chip *chip,
1421 				   struct pd_message *msg)
1422 {
1423 	int ret = 0;
1424 	u8 token;
1425 	u8 crc[4];
1426 	int len;
1427 
1428 	/* first SOP token */
1429 	ret = fusb302_i2c_read(chip, FUSB_REG_FIFOS, &token);
1430 	if (ret < 0)
1431 		return ret;
1432 	ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 2,
1433 				     (u8 *)&msg->header);
1434 	if (ret < 0)
1435 		return ret;
1436 	len = pd_header_cnt_le(msg->header) * 4;
1437 	/* add 4 to length to include the CRC */
1438 	if (len > PD_MAX_PAYLOAD * 4) {
1439 		fusb302_log(chip, "PD message too long %d", len);
1440 		return -EINVAL;
1441 	}
1442 	if (len > 0) {
1443 		ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, len,
1444 					     (u8 *)msg->payload);
1445 		if (ret < 0)
1446 			return ret;
1447 	}
1448 	/* another 4 bytes to read CRC out */
1449 	ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 4, crc);
1450 	if (ret < 0)
1451 		return ret;
1452 	fusb302_log(chip, "PD message header: %x", msg->header);
1453 	fusb302_log(chip, "PD message len: %d", len);
1454 
1455 	/*
1456 	 * Check if we've read off a GoodCRC message. If so then indicate to
1457 	 * TCPM that the previous transmission has completed. Otherwise we pass
1458 	 * the received message over to TCPM for processing.
1459 	 *
1460 	 * We make this check here instead of basing the reporting decision on
1461 	 * the IRQ event type, as it's possible for the chip to report the
1462 	 * TX_SUCCESS and GCRCSENT events out of order on occasion, so we need
1463 	 * to check the message type to ensure correct reporting to TCPM.
1464 	 */
1465 	if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC))
1466 		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
1467 	else
1468 		tcpm_pd_receive(chip->tcpm_port, msg);
1469 
1470 	return ret;
1471 }
1472 
1473 static irqreturn_t fusb302_irq_intn(int irq, void *dev_id)
1474 {
1475 	struct fusb302_chip *chip = dev_id;
1476 	unsigned long flags;
1477 
1478 	/* Disable our level triggered IRQ until our irq_work has cleared it */
1479 	disable_irq_nosync(chip->gpio_int_n_irq);
1480 
1481 	spin_lock_irqsave(&chip->irq_lock, flags);
1482 	if (chip->irq_suspended)
1483 		chip->irq_while_suspended = true;
1484 	else
1485 		schedule_work(&chip->irq_work);
1486 	spin_unlock_irqrestore(&chip->irq_lock, flags);
1487 
1488 	return IRQ_HANDLED;
1489 }
1490 
1491 static void fusb302_irq_work(struct work_struct *work)
1492 {
1493 	struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
1494 						 irq_work);
1495 	int ret = 0;
1496 	u8 interrupt;
1497 	u8 interrupta;
1498 	u8 interruptb;
1499 	u8 status0;
1500 	bool vbus_present;
1501 	bool comp_result;
1502 	bool intr_togdone;
1503 	bool intr_bc_lvl;
1504 	bool intr_comp_chng;
1505 	struct pd_message pd_msg;
1506 
1507 	mutex_lock(&chip->lock);
1508 	/* grab a snapshot of intr flags */
1509 	intr_togdone = chip->intr_togdone;
1510 	intr_bc_lvl = chip->intr_bc_lvl;
1511 	intr_comp_chng = chip->intr_comp_chng;
1512 
1513 	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, &interrupt);
1514 	if (ret < 0)
1515 		goto done;
1516 	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTA, &interrupta);
1517 	if (ret < 0)
1518 		goto done;
1519 	ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTB, &interruptb);
1520 	if (ret < 0)
1521 		goto done;
1522 	ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1523 	if (ret < 0)
1524 		goto done;
1525 	fusb302_log(chip,
1526 		    "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x",
1527 		    interrupt, interrupta, interruptb, status0);
1528 
1529 	if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) {
1530 		vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK);
1531 		fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s",
1532 			    vbus_present ? "On" : "Off");
1533 		if (vbus_present != chip->vbus_present) {
1534 			chip->vbus_present = vbus_present;
1535 			tcpm_vbus_change(chip->tcpm_port);
1536 		}
1537 	}
1538 
1539 	if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) {
1540 		fusb302_log(chip, "IRQ: TOGDONE");
1541 		ret = fusb302_handle_togdone(chip);
1542 		if (ret < 0) {
1543 			fusb302_log(chip,
1544 				    "handle togdone error, ret=%d", ret);
1545 			goto done;
1546 		}
1547 	}
1548 
1549 	if ((interrupt & FUSB_REG_INTERRUPT_BC_LVL) && intr_bc_lvl) {
1550 		fusb302_log(chip, "IRQ: BC_LVL, handler pending");
1551 		/*
1552 		 * as BC_LVL interrupt can be affected by PD activity,
1553 		 * apply delay to for the handler to wait for the PD
1554 		 * signaling to finish.
1555 		 */
1556 		mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
1557 				 msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
1558 	}
1559 
1560 	if ((interrupt & FUSB_REG_INTERRUPT_COMP_CHNG) && intr_comp_chng) {
1561 		comp_result = !!(status0 & FUSB_REG_STATUS0_COMP);
1562 		fusb302_log(chip, "IRQ: COMP_CHNG, comp=%s",
1563 			    comp_result ? "true" : "false");
1564 		if (comp_result) {
1565 			/* cc level > Rd_threshold, detach */
1566 			chip->cc1 = TYPEC_CC_OPEN;
1567 			chip->cc2 = TYPEC_CC_OPEN;
1568 			tcpm_cc_change(chip->tcpm_port);
1569 		}
1570 	}
1571 
1572 	if (interrupt & FUSB_REG_INTERRUPT_COLLISION) {
1573 		fusb302_log(chip, "IRQ: PD collision");
1574 		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
1575 	}
1576 
1577 	if (interrupta & FUSB_REG_INTERRUPTA_RETRYFAIL) {
1578 		fusb302_log(chip, "IRQ: PD retry failed");
1579 		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
1580 	}
1581 
1582 	if (interrupta & FUSB_REG_INTERRUPTA_HARDSENT) {
1583 		fusb302_log(chip, "IRQ: PD hardreset sent");
1584 		ret = fusb302_pd_reset(chip);
1585 		if (ret < 0) {
1586 			fusb302_log(chip, "cannot PD reset, ret=%d", ret);
1587 			goto done;
1588 		}
1589 		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
1590 	}
1591 
1592 	if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) {
1593 		fusb302_log(chip, "IRQ: PD tx success");
1594 		ret = fusb302_pd_read_message(chip, &pd_msg);
1595 		if (ret < 0) {
1596 			fusb302_log(chip,
1597 				    "cannot read in PD message, ret=%d", ret);
1598 			goto done;
1599 		}
1600 	}
1601 
1602 	if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) {
1603 		fusb302_log(chip, "IRQ: PD received hardreset");
1604 		ret = fusb302_pd_reset(chip);
1605 		if (ret < 0) {
1606 			fusb302_log(chip, "cannot PD reset, ret=%d", ret);
1607 			goto done;
1608 		}
1609 		tcpm_pd_hard_reset(chip->tcpm_port);
1610 	}
1611 
1612 	if (interruptb & FUSB_REG_INTERRUPTB_GCRCSENT) {
1613 		fusb302_log(chip, "IRQ: PD sent good CRC");
1614 		ret = fusb302_pd_read_message(chip, &pd_msg);
1615 		if (ret < 0) {
1616 			fusb302_log(chip,
1617 				    "cannot read in PD message, ret=%d", ret);
1618 			goto done;
1619 		}
1620 	}
1621 done:
1622 	mutex_unlock(&chip->lock);
1623 	enable_irq(chip->gpio_int_n_irq);
1624 }
1625 
1626 static int init_gpio(struct fusb302_chip *chip)
1627 {
1628 	struct device *dev = chip->dev;
1629 	int ret = 0;
1630 
1631 	chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN);
1632 	if (IS_ERR(chip->gpio_int_n)) {
1633 		dev_err(dev, "failed to request gpio_int_n\n");
1634 		return PTR_ERR(chip->gpio_int_n);
1635 	}
1636 	ret = gpiod_to_irq(chip->gpio_int_n);
1637 	if (ret < 0) {
1638 		dev_err(dev,
1639 			"cannot request IRQ for GPIO Int_N, ret=%d", ret);
1640 		return ret;
1641 	}
1642 	chip->gpio_int_n_irq = ret;
1643 	return 0;
1644 }
1645 
1646 #define PDO_FIXED_FLAGS \
1647 	(PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
1648 
1649 static const u32 src_pdo[] = {
1650 	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
1651 };
1652 
1653 static const u32 snk_pdo[] = {
1654 	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
1655 };
1656 
1657 static const struct property_entry port_props[] = {
1658 	PROPERTY_ENTRY_STRING("data-role", "dual"),
1659 	PROPERTY_ENTRY_STRING("power-role", "dual"),
1660 	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
1661 	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
1662 	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
1663 	PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
1664 	{ }
1665 };
1666 
1667 static struct fwnode_handle *fusb302_fwnode_get(struct device *dev)
1668 {
1669 	struct fwnode_handle *fwnode;
1670 
1671 	fwnode = device_get_named_child_node(dev, "connector");
1672 	if (!fwnode)
1673 		fwnode = fwnode_create_software_node(port_props, NULL);
1674 
1675 	return fwnode;
1676 }
1677 
1678 static int fusb302_probe(struct i2c_client *client,
1679 			 const struct i2c_device_id *id)
1680 {
1681 	struct fusb302_chip *chip;
1682 	struct i2c_adapter *adapter = client->adapter;
1683 	struct device *dev = &client->dev;
1684 	const char *name;
1685 	int ret = 0;
1686 
1687 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
1688 		dev_err(&client->dev,
1689 			"I2C/SMBus block functionality not supported!\n");
1690 		return -ENODEV;
1691 	}
1692 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
1693 	if (!chip)
1694 		return -ENOMEM;
1695 
1696 	chip->i2c_client = client;
1697 	chip->dev = &client->dev;
1698 	mutex_init(&chip->lock);
1699 
1700 	/*
1701 	 * Devicetree platforms should get extcon via phandle (not yet
1702 	 * supported). On ACPI platforms, we get the name from a device prop.
1703 	 * This device prop is for kernel internal use only and is expected
1704 	 * to be set by the platform code which also registers the i2c client
1705 	 * for the fusb302.
1706 	 */
1707 	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
1708 		chip->extcon = extcon_get_extcon_dev(name);
1709 		if (!chip->extcon)
1710 			return -EPROBE_DEFER;
1711 	}
1712 
1713 	chip->vbus = devm_regulator_get(chip->dev, "vbus");
1714 	if (IS_ERR(chip->vbus))
1715 		return PTR_ERR(chip->vbus);
1716 
1717 	chip->wq = create_singlethread_workqueue(dev_name(chip->dev));
1718 	if (!chip->wq)
1719 		return -ENOMEM;
1720 
1721 	spin_lock_init(&chip->irq_lock);
1722 	INIT_WORK(&chip->irq_work, fusb302_irq_work);
1723 	INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work);
1724 	init_tcpc_dev(&chip->tcpc_dev);
1725 	fusb302_debugfs_init(chip);
1726 
1727 	if (client->irq) {
1728 		chip->gpio_int_n_irq = client->irq;
1729 	} else {
1730 		ret = init_gpio(chip);
1731 		if (ret < 0)
1732 			goto destroy_workqueue;
1733 	}
1734 
1735 	chip->tcpc_dev.fwnode = fusb302_fwnode_get(dev);
1736 	if (IS_ERR(chip->tcpc_dev.fwnode)) {
1737 		ret = PTR_ERR(chip->tcpc_dev.fwnode);
1738 		goto destroy_workqueue;
1739 	}
1740 
1741 	chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
1742 	if (IS_ERR(chip->tcpm_port)) {
1743 		fwnode_handle_put(chip->tcpc_dev.fwnode);
1744 		ret = PTR_ERR(chip->tcpm_port);
1745 		if (ret != -EPROBE_DEFER)
1746 			dev_err(dev, "cannot register tcpm port, ret=%d", ret);
1747 		goto destroy_workqueue;
1748 	}
1749 
1750 	ret = request_irq(chip->gpio_int_n_irq, fusb302_irq_intn,
1751 			  IRQF_ONESHOT | IRQF_TRIGGER_LOW,
1752 			  "fsc_interrupt_int_n", chip);
1753 	if (ret < 0) {
1754 		dev_err(dev, "cannot request IRQ for GPIO Int_N, ret=%d", ret);
1755 		goto tcpm_unregister_port;
1756 	}
1757 	enable_irq_wake(chip->gpio_int_n_irq);
1758 	i2c_set_clientdata(client, chip);
1759 
1760 	return ret;
1761 
1762 tcpm_unregister_port:
1763 	tcpm_unregister_port(chip->tcpm_port);
1764 	fwnode_handle_put(chip->tcpc_dev.fwnode);
1765 destroy_workqueue:
1766 	fusb302_debugfs_exit(chip);
1767 	destroy_workqueue(chip->wq);
1768 
1769 	return ret;
1770 }
1771 
1772 static int fusb302_remove(struct i2c_client *client)
1773 {
1774 	struct fusb302_chip *chip = i2c_get_clientdata(client);
1775 
1776 	disable_irq_wake(chip->gpio_int_n_irq);
1777 	free_irq(chip->gpio_int_n_irq, chip);
1778 	cancel_work_sync(&chip->irq_work);
1779 	cancel_delayed_work_sync(&chip->bc_lvl_handler);
1780 	tcpm_unregister_port(chip->tcpm_port);
1781 	fwnode_handle_put(chip->tcpc_dev.fwnode);
1782 	destroy_workqueue(chip->wq);
1783 	fusb302_debugfs_exit(chip);
1784 
1785 	return 0;
1786 }
1787 
1788 static int fusb302_pm_suspend(struct device *dev)
1789 {
1790 	struct fusb302_chip *chip = dev->driver_data;
1791 	unsigned long flags;
1792 
1793 	spin_lock_irqsave(&chip->irq_lock, flags);
1794 	chip->irq_suspended = true;
1795 	spin_unlock_irqrestore(&chip->irq_lock, flags);
1796 
1797 	/* Make sure any pending irq_work is finished before the bus suspends */
1798 	flush_work(&chip->irq_work);
1799 	return 0;
1800 }
1801 
1802 static int fusb302_pm_resume(struct device *dev)
1803 {
1804 	struct fusb302_chip *chip = dev->driver_data;
1805 	unsigned long flags;
1806 
1807 	spin_lock_irqsave(&chip->irq_lock, flags);
1808 	if (chip->irq_while_suspended) {
1809 		schedule_work(&chip->irq_work);
1810 		chip->irq_while_suspended = false;
1811 	}
1812 	chip->irq_suspended = false;
1813 	spin_unlock_irqrestore(&chip->irq_lock, flags);
1814 
1815 	return 0;
1816 }
1817 
1818 static const struct of_device_id fusb302_dt_match[] = {
1819 	{.compatible = "fcs,fusb302"},
1820 	{},
1821 };
1822 MODULE_DEVICE_TABLE(of, fusb302_dt_match);
1823 
1824 static const struct i2c_device_id fusb302_i2c_device_id[] = {
1825 	{"typec_fusb302", 0},
1826 	{},
1827 };
1828 MODULE_DEVICE_TABLE(i2c, fusb302_i2c_device_id);
1829 
1830 static const struct dev_pm_ops fusb302_pm_ops = {
1831 	.suspend = fusb302_pm_suspend,
1832 	.resume = fusb302_pm_resume,
1833 };
1834 
1835 static struct i2c_driver fusb302_driver = {
1836 	.driver = {
1837 		   .name = "typec_fusb302",
1838 		   .pm = &fusb302_pm_ops,
1839 		   .of_match_table = of_match_ptr(fusb302_dt_match),
1840 		   },
1841 	.probe = fusb302_probe,
1842 	.remove = fusb302_remove,
1843 	.id_table = fusb302_i2c_device_id,
1844 };
1845 module_i2c_driver(fusb302_driver);
1846 
1847 MODULE_AUTHOR("Yueyao Zhu <yueyao.zhu@gmail.com>");
1848 MODULE_DESCRIPTION("Fairchild FUSB302 Type-C Chip Driver");
1849 MODULE_LICENSE("GPL");
1850