1 /* Driver for USB Mass Storage compliant devices 2 * Main Header File 3 * 4 * Current development and maintenance by: 5 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) 6 * 7 * Initial work by: 8 * (c) 1999 Michael Gee (michael@linuxspecific.com) 9 * 10 * This driver is based on the 'USB Mass Storage Class' document. This 11 * describes in detail the protocol used to communicate with such 12 * devices. Clearly, the designers had SCSI and ATAPI commands in 13 * mind when they created this document. The commands are all very 14 * similar to commands in the SCSI-II and ATAPI specifications. 15 * 16 * It is important to note that in a number of cases this class 17 * exhibits class-specific exemptions from the USB specification. 18 * Notably the usage of NAK, STALL and ACK differs from the norm, in 19 * that they are used to communicate wait, failed and OK on commands. 20 * 21 * Also, for certain devices, the interrupt endpoint is used to convey 22 * status of a command. 23 * 24 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more 25 * information about this driver. 26 * 27 * This program is free software; you can redistribute it and/or modify it 28 * under the terms of the GNU General Public License as published by the 29 * Free Software Foundation; either version 2, or (at your option) any 30 * later version. 31 * 32 * This program is distributed in the hope that it will be useful, but 33 * WITHOUT ANY WARRANTY; without even the implied warranty of 34 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 35 * General Public License for more details. 36 * 37 * You should have received a copy of the GNU General Public License along 38 * with this program; if not, write to the Free Software Foundation, Inc., 39 * 675 Mass Ave, Cambridge, MA 02139, USA. 40 */ 41 42 #ifndef _USB_H_ 43 #define _USB_H_ 44 45 #include <linux/usb.h> 46 #include <linux/usb_usual.h> 47 #include <linux/blkdev.h> 48 #include <linux/completion.h> 49 #include <linux/mutex.h> 50 #include <linux/workqueue.h> 51 #include <scsi/scsi_host.h> 52 53 struct us_data; 54 struct scsi_cmnd; 55 56 /* 57 * Unusual device list definitions 58 */ 59 60 struct us_unusual_dev { 61 const char* vendorName; 62 const char* productName; 63 __u8 useProtocol; 64 __u8 useTransport; 65 int (*initFunction)(struct us_data *); 66 }; 67 68 69 /* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */ 70 #define US_FLIDX_URB_ACTIVE 0 /* current_urb is in use */ 71 #define US_FLIDX_SG_ACTIVE 1 /* current_sg is in use */ 72 #define US_FLIDX_ABORTING 2 /* abort is in progress */ 73 #define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */ 74 #define US_FLIDX_RESETTING 4 /* device reset in progress */ 75 #define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */ 76 #define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */ 77 #define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */ 78 #define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */ 79 80 #define USB_STOR_STRING_LEN 32 81 82 /* 83 * We provide a DMA-mapped I/O buffer for use with small USB transfers. 84 * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a 85 * 31-byte buffer. But Freecom needs a 64-byte buffer, so that's the 86 * size we'll allocate. 87 */ 88 89 #define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */ 90 #define US_SENSE_SIZE 18 /* Size of the autosense data buffer */ 91 92 typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*); 93 typedef int (*trans_reset)(struct us_data*); 94 typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*); 95 typedef void (*extra_data_destructor)(void *); /* extra data destructor */ 96 typedef void (*pm_hook)(struct us_data *, int); /* power management hook */ 97 98 #define US_SUSPEND 0 99 #define US_RESUME 1 100 101 /* we allocate one of these for every device that we remember */ 102 struct us_data { 103 /* The device we're working with 104 * It's important to note: 105 * (o) you must hold dev_mutex to change pusb_dev 106 */ 107 struct mutex dev_mutex; /* protect pusb_dev */ 108 struct usb_device *pusb_dev; /* this usb_device */ 109 struct usb_interface *pusb_intf; /* this interface */ 110 struct us_unusual_dev *unusual_dev; /* device-filter entry */ 111 unsigned long fflags; /* fixed flags from filter */ 112 unsigned long dflags; /* dynamic atomic bitflags */ 113 unsigned int send_bulk_pipe; /* cached pipe values */ 114 unsigned int recv_bulk_pipe; 115 unsigned int send_ctrl_pipe; 116 unsigned int recv_ctrl_pipe; 117 unsigned int recv_intr_pipe; 118 119 /* information about the device */ 120 char *transport_name; 121 char *protocol_name; 122 __le32 bcs_signature; 123 u8 subclass; 124 u8 protocol; 125 u8 max_lun; 126 127 u8 ifnum; /* interface number */ 128 u8 ep_bInterval; /* interrupt interval */ 129 130 /* function pointers for this device */ 131 trans_cmnd transport; /* transport function */ 132 trans_reset transport_reset; /* transport device reset */ 133 proto_cmnd proto_handler; /* protocol handler */ 134 135 /* SCSI interfaces */ 136 struct scsi_cmnd *srb; /* current srb */ 137 unsigned int tag; /* current dCBWTag */ 138 char scsi_name[32]; /* scsi_host name */ 139 140 /* control and bulk communications data */ 141 struct urb *current_urb; /* USB requests */ 142 struct usb_ctrlrequest *cr; /* control requests */ 143 struct usb_sg_request current_sg; /* scatter-gather req. */ 144 unsigned char *iobuf; /* I/O buffer */ 145 dma_addr_t iobuf_dma; /* buffer DMA addresses */ 146 struct task_struct *ctl_thread; /* the control thread */ 147 148 /* mutual exclusion and synchronization structures */ 149 struct completion cmnd_ready; /* to sleep thread on */ 150 struct completion notify; /* thread begin/end */ 151 wait_queue_head_t delay_wait; /* wait during reset */ 152 struct delayed_work scan_dwork; /* for async scanning */ 153 154 /* subdriver information */ 155 void *extra; /* Any extra data */ 156 extra_data_destructor extra_destructor;/* extra data destructor */ 157 #ifdef CONFIG_PM 158 pm_hook suspend_resume_hook; 159 #endif 160 161 /* hacks for READ CAPACITY bug handling */ 162 int use_last_sector_hacks; 163 int last_sector_retries; 164 }; 165 166 /* Convert between us_data and the corresponding Scsi_Host */ 167 static inline struct Scsi_Host *us_to_host(struct us_data *us) { 168 return container_of((void *) us, struct Scsi_Host, hostdata); 169 } 170 static inline struct us_data *host_to_us(struct Scsi_Host *host) { 171 return (struct us_data *) host->hostdata; 172 } 173 174 /* Function to fill an inquiry response. See usb.c for details */ 175 extern void fill_inquiry_response(struct us_data *us, 176 unsigned char *data, unsigned int data_len); 177 178 /* The scsi_lock() and scsi_unlock() macros protect the sm_state and the 179 * single queue element srb for write access */ 180 #define scsi_unlock(host) spin_unlock_irq(host->host_lock) 181 #define scsi_lock(host) spin_lock_irq(host->host_lock) 182 183 /* General routines provided by the usb-storage standard core */ 184 #ifdef CONFIG_PM 185 extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message); 186 extern int usb_stor_resume(struct usb_interface *iface); 187 extern int usb_stor_reset_resume(struct usb_interface *iface); 188 #else 189 #define usb_stor_suspend NULL 190 #define usb_stor_resume NULL 191 #define usb_stor_reset_resume NULL 192 #endif 193 194 extern int usb_stor_pre_reset(struct usb_interface *iface); 195 extern int usb_stor_post_reset(struct usb_interface *iface); 196 197 extern int usb_stor_probe1(struct us_data **pus, 198 struct usb_interface *intf, 199 const struct usb_device_id *id, 200 struct us_unusual_dev *unusual_dev); 201 extern int usb_stor_probe2(struct us_data *us); 202 extern void usb_stor_disconnect(struct usb_interface *intf); 203 204 extern void usb_stor_adjust_quirks(struct usb_device *dev, 205 unsigned long *fflags); 206 207 #endif 208