1 /* Driver for USB Mass Storage compliant devices 2 * Unusual Devices File 3 * 4 * Current development and maintenance by: 5 * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) 6 * 7 * Initial work by: 8 * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. 9 * 10 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more 11 * information about this driver. 12 * 13 * This program is free software; you can redistribute it and/or modify it 14 * under the terms of the GNU General Public License as published by the 15 * Free Software Foundation; either version 2, or (at your option) any 16 * later version. 17 * 18 * This program is distributed in the hope that it will be useful, but 19 * WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 21 * General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License along 24 * with this program; if not, write to the Free Software Foundation, Inc., 25 * 675 Mass Ave, Cambridge, MA 02139, USA. 26 */ 27 28 /* IMPORTANT NOTE: This file must be included in another file which does 29 * the following thing for it to work: 30 * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined 31 * before this file is included. 32 */ 33 34 /* If you edit this file, please try to keep it sorted first by VendorID, 35 * then by ProductID. 36 * 37 * If you want to add an entry for this file, be sure to include the 38 * following information: 39 * - a patch that adds the entry for your device, including your 40 * email address right above the entry (plus maybe a brief 41 * explanation of the reason for the entry), 42 * - a copy of /proc/bus/usb/devices with your device plugged in 43 * running with this patch. 44 * Send your submission to either Phil Dibowitz <phil@ipom.com> or 45 * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the 46 * USB development list <linux-usb@vger.kernel.org> and the USB storage list 47 * <usb-storage@lists.one-eyed-alien.net> 48 */ 49 50 /* Note: If you add an entry only in order to set the CAPACITY_OK flag, 51 * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is 52 * because such entries mark devices which actually work correctly, 53 * as opposed to devices that do something strangely or wrongly. 54 */ 55 56 #if !defined(CONFIG_USB_STORAGE_SDDR09) && \ 57 !defined(CONFIG_USB_STORAGE_SDDR09_MODULE) 58 #define NO_SDDR09 59 #endif 60 61 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> 62 */ 63 UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, 64 "ATMEL", 65 "SND1 Storage", 66 US_SC_DEVICE, US_PR_DEVICE, NULL, 67 US_FL_IGNORE_RESIDUE), 68 69 /* modified by Tobias Lorenz <tobias.lorenz@gmx.net> */ 70 UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0200, 71 "Mitsumi", 72 "USB FDD", 73 US_SC_DEVICE, US_PR_DEVICE, NULL, 74 US_FL_SINGLE_LUN ), 75 76 /* Reported by Rodolfo Quesada <rquesada@roqz.net> */ 77 UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003, 78 "VIA Technologies Inc.", 79 "Mitsumi multi cardreader", 80 US_SC_DEVICE, US_PR_DEVICE, NULL, 81 US_FL_IGNORE_RESIDUE ), 82 83 UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, 84 "HP", 85 "CD-Writer+", 86 US_SC_8070, US_PR_CB, NULL, 0), 87 88 /* Reported by Ben Efros <ben@pc-doctor.com> */ 89 UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000, 90 "HP", 91 "Personal Media Drive", 92 US_SC_DEVICE, US_PR_DEVICE, NULL, 93 US_FL_SANE_SENSE ), 94 95 /* Reported by Grant Grundler <grundler@parisc-linux.org> 96 * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware. 97 */ 98 UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001, 99 "HP", 100 "PhotoSmart R707", 101 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), 102 103 /* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net> 104 * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product) 105 * for USB floppies that need the SINGLE_LUN enforcement. 106 */ 107 UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, 108 "NEC", 109 "NEC USB UF000x", 110 US_SC_DEVICE, US_PR_DEVICE, NULL, 111 US_FL_SINGLE_LUN ), 112 113 /* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */ 114 UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, 115 "VIA Technologies Inc.", 116 "USB 2.0 Card Reader", 117 US_SC_DEVICE, US_PR_DEVICE, NULL, 118 US_FL_IGNORE_RESIDUE ), 119 120 /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au> 121 * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message 122 * always fails and confuses drive. 123 */ 124 UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, 125 "Buffalo", 126 "DUB-P40G HDD", 127 US_SC_DEVICE, US_PR_DEVICE, NULL, 128 US_FL_FIX_INQUIRY ), 129 130 /* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */ 131 UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100, 132 "Samsung Info. Systems America, Inc.", 133 "MP3 Player", 134 US_SC_DEVICE, US_PR_DEVICE, NULL, 135 US_FL_IGNORE_RESIDUE ), 136 137 /* Reported by Orgad Shaneh <orgads@gmail.com> */ 138 UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100, 139 "Samsung", "MP3 Player", 140 US_SC_DEVICE, US_PR_DEVICE, NULL, 141 US_FL_IGNORE_RESIDUE ), 142 143 /* Reported by Christian Leber <christian@leber.de> */ 144 UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100, 145 "TrekStor", 146 "i.Beat 115 2.0", 147 US_SC_DEVICE, US_PR_DEVICE, NULL, 148 US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ), 149 150 /* Reported by Stefan Werner <dustbln@gmx.de> */ 151 UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, 152 "TrekStor", 153 "i.Beat Joy 2.0", 154 US_SC_DEVICE, US_PR_DEVICE, NULL, 155 US_FL_IGNORE_RESIDUE ), 156 157 /* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */ 158 UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, 159 "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */ 160 US_SC_DEVICE, US_PR_DEVICE, NULL, 161 US_FL_IGNORE_RESIDUE ), 162 163 /* Reported by Andrew Nayenko <relan@bk.ru> 164 * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */ 165 UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, 166 "Nokia", 167 "Nokia 6288", 168 US_SC_DEVICE, US_PR_DEVICE, NULL, 169 US_FL_MAX_SECTORS_64 ), 170 171 /* Reported by Mario Rettig <mariorettig@web.de> */ 172 UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, 173 "Nokia", 174 "Nokia 3250", 175 US_SC_DEVICE, US_PR_DEVICE, NULL, 176 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 177 178 /* Reported by <honkkis@gmail.com> */ 179 UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100, 180 "Nokia", 181 "E70", 182 US_SC_DEVICE, US_PR_DEVICE, NULL, 183 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 184 185 /* Reported by Jon Hart <Jon.Hart@web.de> */ 186 UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100, 187 "Nokia", 188 "E60", 189 US_SC_DEVICE, US_PR_DEVICE, NULL, 190 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), 191 192 /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and 193 * Einar Th. Einarsson <einarthered@gmail.com> */ 194 UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, 195 "Nokia", 196 "N91", 197 US_SC_DEVICE, US_PR_DEVICE, NULL, 198 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 199 200 /* Reported by Jiri Slaby <jirislaby@gmail.com> and 201 * Rene C. Castberg <Rene@Castberg.org> */ 202 UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100, 203 "Nokia", 204 "N80", 205 US_SC_DEVICE, US_PR_DEVICE, NULL, 206 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 207 208 /* Reported by Matthew Bloch <matthew@bytemark.co.uk> */ 209 UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100, 210 "Nokia", 211 "E61", 212 US_SC_DEVICE, US_PR_DEVICE, NULL, 213 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 214 215 /* Reported by Bardur Arantsson <bardur@scientician.net> */ 216 UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610, 217 "Nokia", 218 "6131", 219 US_SC_DEVICE, US_PR_DEVICE, NULL, 220 US_FL_MAX_SECTORS_64 ), 221 222 /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */ 223 UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999, 224 "Nokia", 225 "Nokia 6233", 226 US_SC_DEVICE, US_PR_DEVICE, NULL, 227 US_FL_MAX_SECTORS_64 ), 228 229 /* Reported by Alex Corcoles <alex@corcoles.net> */ 230 UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, 231 "Nokia", 232 "6234", 233 US_SC_DEVICE, US_PR_DEVICE, NULL, 234 US_FL_MAX_SECTORS_64 ), 235 236 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ 237 UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, 238 "SMSC", 239 "FDC GOLD-2.30", 240 US_SC_DEVICE, US_PR_DEVICE, NULL, 241 US_FL_SINGLE_LUN ), 242 243 #ifdef NO_SDDR09 244 UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, 245 "Microtech", 246 "CameraMate", 247 US_SC_SCSI, US_PR_CB, NULL, 248 US_FL_SINGLE_LUN ), 249 #endif 250 251 /* Patch submitted by Daniel Drake <dsd@gentoo.org> 252 * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */ 253 UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, 254 "Neuros Audio", 255 "USB 2.0 HD 2.5", 256 US_SC_DEVICE, US_PR_BULK, NULL, 257 US_FL_NEED_OVERRIDE ), 258 259 /* 260 * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559. 261 * The key does not actually break, but it returns zero sense which 262 * makes our SCSI stack to print confusing messages. 263 */ 264 UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, 265 "USBest Technology", /* sold by Transcend */ 266 "USB Mass Storage Device", 267 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), 268 269 /* 270 * Bohdan Linda <bohdan.linda@gmail.com> 271 * 1GB USB sticks MyFlash High Speed. I have restricted 272 * the revision to my model only 273 */ 274 UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, 275 "USB 2.0", 276 "Flash Disk", 277 US_SC_DEVICE, US_PR_DEVICE, NULL, 278 US_FL_NOT_LOCKABLE ), 279 280 /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com> 281 * Obviously the PROM has not been customized by the VAR; 282 * the Vendor and Product string descriptors are: 283 * Generic Mass Storage (PROTOTYPE--Remember to change idVendor) 284 * Generic Manufacturer (PROTOTYPE--Remember to change idVendor) 285 */ 286 UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000, 287 "Mitac", 288 "GPS", 289 US_SC_DEVICE, US_PR_DEVICE, NULL, 290 US_FL_MAX_SECTORS_64 ), 291 292 /* 293 * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) 294 * Reported by Pete Zaitcev <zaitcev@redhat.com> 295 * This device chokes on both version of MODE SENSE which we have, so 296 * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT. 297 */ 298 UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100, 299 "AMI", 300 "Virtual Floppy", 301 US_SC_DEVICE, US_PR_DEVICE, NULL, 302 US_FL_NO_WP_DETECT), 303 304 /* Patch submitted by Philipp Friedrich <philipp@void.at> */ 305 UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, 306 "Kyocera", 307 "Finecam S3x", 308 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY), 309 310 /* Patch submitted by Philipp Friedrich <philipp@void.at> */ 311 UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100, 312 "Kyocera", 313 "Finecam S4", 314 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY), 315 316 /* Patch submitted by Stephane Galles <stephane.galles@free.fr> */ 317 UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, 318 "Kyocera", 319 "Finecam S5", 320 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), 321 322 /* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */ 323 UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100, 324 "Kyocera", 325 "CONTAX SL300R T*", 326 US_SC_DEVICE, US_PR_DEVICE, NULL, 327 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE), 328 329 /* Reported by Paul Stewart <stewart@wetlogic.net> 330 * This entry is needed because the device reports Sub=ff */ 331 UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, 332 "Hitachi", 333 "DVD-CAM DZ-MV100A Camcorder", 334 US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN), 335 336 /* BENQ DC5330 337 * Reported by Manuel Fombuena <mfombuena@ya.com> and 338 * Frank Copeland <fjc@thingy.apana.org.au> */ 339 UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, 340 "Tekom Technologies, Inc", 341 "300_CAMERA", 342 US_SC_DEVICE, US_PR_DEVICE, NULL, 343 US_FL_IGNORE_RESIDUE ), 344 345 /* Patch for Nikon coolpix 2000 346 * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/ 347 UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010, 348 "NIKON", 349 "NIKON DSC E2000", 350 US_SC_DEVICE, US_PR_DEVICE,NULL, 351 US_FL_NOT_LOCKABLE ), 352 353 /* Reported by Doug Maxey (dwm@austin.ibm.com) */ 354 UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, 355 "IBM", 356 "IBM RSA2", 357 US_SC_DEVICE, US_PR_CB, NULL, 358 US_FL_MAX_SECTORS_MIN), 359 360 /* Reported by Simon Levitt <simon@whattf.com> 361 * This entry needs Sub and Proto fields */ 362 UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, 363 "Epson", 364 "875DC Storage", 365 US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY), 366 367 /* Reported by Khalid Aziz <khalid@gonehiking.org> 368 * This entry is needed because the device reports Sub=ff */ 369 UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, 370 "Epson", 371 "785EPX Storage", 372 US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN), 373 374 /* Not sure who reported this originally but 375 * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN 376 * flag be added */ 377 UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, 378 "Fujifilm", 379 "FinePix 1400Zoom", 380 US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), 381 382 /* Reported by Peter Wächtler <pwaechtler@loewe-komp.de> 383 * The device needs the flags only. 384 */ 385 UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074, 386 "ScanLogic", 387 "SL11R-IDE", 388 US_SC_DEVICE, US_PR_DEVICE, NULL, 389 US_FL_FIX_INQUIRY), 390 391 /* Reported by Kriston Fincher <kriston@airmail.net> 392 * Patch submitted by Sean Millichamp <sean@bruenor.org> 393 * This is to support the Panasonic PalmCam PV-SD4090 394 * This entry is needed because the device reports Sub=ff 395 */ 396 UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200, 397 "Panasonic", 398 "LS-120 Camera", 399 US_SC_UFI, US_PR_DEVICE, NULL, 0), 400 401 /* From Yukihiro Nakai, via zaitcev@yahoo.com. 402 * This is needed for CB instead of CBI */ 403 UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000, 404 "Sharp CE-CW05", 405 "CD-R/RW Drive", 406 US_SC_8070, US_PR_CB, NULL, 0), 407 408 /* Reported by Adriaan Penning <a.penning@luon.net> */ 409 UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999, 410 "Panasonic", 411 "DMC-LCx Camera", 412 US_SC_DEVICE, US_PR_DEVICE, NULL, 413 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), 414 415 /* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */ 416 UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999, 417 "LEICA", 418 "D-LUX Camera", 419 US_SC_DEVICE, US_PR_DEVICE, NULL, 420 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), 421 422 /* Most of the following entries were developed with the help of 423 * Shuttle/SCM directly. 424 */ 425 UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, 426 "Matshita", 427 "LS-120", 428 US_SC_8020, US_PR_CB, NULL, 0), 429 430 UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, 431 "Shuttle", 432 "eUSCSI Bridge", 433 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, 434 US_FL_SCM_MULT_TARG ), 435 436 #ifdef NO_SDDR09 437 UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, 438 "SCM Microsystems", 439 "eUSB CompactFlash Adapter", 440 US_SC_SCSI, US_PR_CB, NULL, 441 US_FL_SINGLE_LUN), 442 #endif 443 444 /* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */ 445 UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100, 446 "SCM Microsystems Inc.", 447 "eUSB MMC Adapter", 448 US_SC_SCSI, US_PR_CB, NULL, 449 US_FL_SINGLE_LUN), 450 451 /* Reported by Daniel Nouri <dpunktnpunkt@web.de> */ 452 UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205, 453 "Shuttle", 454 "eUSB MMC Adapter", 455 US_SC_SCSI, US_PR_DEVICE, NULL, 456 US_FL_SINGLE_LUN), 457 458 UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200, 459 "Sony", 460 "Hifd", 461 US_SC_SCSI, US_PR_CB, NULL, 462 US_FL_SINGLE_LUN), 463 464 UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200, 465 "Shuttle", 466 "eUSB ATA/ATAPI Adapter", 467 US_SC_8020, US_PR_CB, NULL, 0), 468 469 UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200, 470 "Shuttle", 471 "eUSB CompactFlash Adapter", 472 US_SC_8020, US_PR_CB, NULL, 0), 473 474 UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100, 475 "Shuttle", 476 "eUSCSI Bridge", 477 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 478 US_FL_SCM_MULT_TARG ), 479 480 UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100, 481 "Shuttle", 482 "eUSCSI Bridge", 483 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 484 US_FL_SCM_MULT_TARG ), 485 486 UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, 487 "Shuttle", 488 "CD-RW Device", 489 US_SC_8020, US_PR_CB, NULL, 0), 490 491 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */ 492 UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, 493 "Samsung", 494 "YP-U3", 495 US_SC_DEVICE, US_PR_DEVICE, NULL, 496 US_FL_MAX_SECTORS_64), 497 498 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. 499 * Device uses standards-violating 32-byte Bulk Command Block Wrappers and 500 * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. 501 */ 502 UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, 503 "Kobian Mercury", 504 "Binocam DCB-132", 505 US_SC_DEVICE, US_PR_DEVICE, NULL, 506 US_FL_BULK32), 507 508 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */ 509 UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, 510 "Belkin", 511 "USB SCSI Adaptor", 512 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 513 US_FL_SCM_MULT_TARG ), 514 515 /* Iomega Clik! Drive 516 * Reported by David Chatenay <dchatenay@hotmail.com> 517 * The reason this is needed is not fully known. 518 */ 519 UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, 520 "Iomega", 521 "USB Clik! 40", 522 US_SC_8070, US_PR_DEVICE, NULL, 523 US_FL_FIX_INQUIRY ), 524 525 /* Added by Alan Stern <stern@rowland.harvard.edu> */ 526 COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999, 527 "Linux", 528 "File-backed Storage Gadget", 529 US_SC_DEVICE, US_PR_DEVICE, NULL, 530 US_FL_CAPACITY_OK ), 531 532 /* Yakumo Mega Image 37 533 * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */ 534 UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100, 535 "Tekom Technologies, Inc", 536 "300_CAMERA", 537 US_SC_DEVICE, US_PR_DEVICE, NULL, 538 US_FL_IGNORE_RESIDUE ), 539 540 /* Another Yakumo camera. 541 * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */ 542 UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100, 543 "Tekom Technologies, Inc", 544 "300_CAMERA", 545 US_SC_DEVICE, US_PR_DEVICE, NULL, 546 US_FL_IGNORE_RESIDUE ), 547 548 /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */ 549 UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100, 550 "Tekom Technologies, Inc", 551 "300_CAMERA", 552 US_SC_DEVICE, US_PR_DEVICE, NULL, 553 US_FL_IGNORE_RESIDUE ), 554 555 /* Yakumo Mega Image 47 556 * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */ 557 UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100, 558 "Tekom Technologies, Inc", 559 "400_CAMERA", 560 US_SC_DEVICE, US_PR_DEVICE, NULL, 561 US_FL_IGNORE_RESIDUE ), 562 563 /* Reported by Paul Ortyl <ortylp@3miasto.net> 564 * Note that it's similar to the device above, only different prodID */ 565 UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100, 566 "Tekom Technologies, Inc", 567 "400_CAMERA", 568 US_SC_DEVICE, US_PR_DEVICE, NULL, 569 US_FL_IGNORE_RESIDUE ), 570 571 UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, 572 "Sony", 573 "DSC-S30/S70/S75/505V/F505/F707/F717/P8", 574 US_SC_SCSI, US_PR_DEVICE, NULL, 575 US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ), 576 577 /* Submitted by Lars Jacob <jacob.lars@googlemail.com> 578 * This entry is needed because the device reports Sub=ff */ 579 UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, 580 "Sony", 581 "DSC-T1/T5/H5", 582 US_SC_8070, US_PR_DEVICE, NULL, 583 US_FL_SINGLE_LUN ), 584 585 586 /* Reported by wim@geeks.nl */ 587 UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, 588 "Sony", 589 "Memorystick NW-MS7", 590 US_SC_DEVICE, US_PR_DEVICE, NULL, 591 US_FL_SINGLE_LUN ), 592 593 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */ 594 UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000, 595 "Sony", 596 "USB Floppy Drive", 597 US_SC_DEVICE, US_PR_DEVICE, NULL, 598 US_FL_SINGLE_LUN ), 599 600 UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, 601 "Sony", 602 "Memorystick MSAC-US1", 603 US_SC_DEVICE, US_PR_DEVICE, NULL, 604 US_FL_SINGLE_LUN ), 605 606 /* Submitted by Klaus Mueller <k.mueller@intershop.de> */ 607 UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, 608 "Sony", 609 "Handycam", 610 US_SC_SCSI, US_PR_DEVICE, NULL, 611 US_FL_SINGLE_LUN ), 612 613 /* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */ 614 UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500, 615 "Sony", 616 "Handycam HC-85", 617 US_SC_UFI, US_PR_DEVICE, NULL, 618 US_FL_SINGLE_LUN ), 619 620 UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999, 621 "Sony", 622 "Memorystick MSC-U01N", 623 US_SC_DEVICE, US_PR_DEVICE, NULL, 624 US_FL_SINGLE_LUN ), 625 626 /* Submitted by Michal Mlotek <mlotek@foobar.pl> */ 627 UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999, 628 "Sony", 629 "PEG N760c Memorystick", 630 US_SC_DEVICE, US_PR_DEVICE, NULL, 631 US_FL_FIX_INQUIRY ), 632 633 UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999, 634 "Sony", 635 "Memorystick MSC-U03", 636 US_SC_UFI, US_PR_CB, NULL, 637 US_FL_SINGLE_LUN ), 638 639 /* Submitted by Nathan Babb <nathan@lexi.com> */ 640 UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999, 641 "Sony", 642 "PEG Mass Storage", 643 US_SC_DEVICE, US_PR_DEVICE, NULL, 644 US_FL_FIX_INQUIRY ), 645 646 /* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */ 647 UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999, 648 "Sony", 649 "PEG Mass Storage", 650 US_SC_DEVICE, US_PR_DEVICE, NULL, 651 US_FL_FIX_INQUIRY ), 652 653 /* Submitted by Mike Alborn <malborn@deandra.homeip.net> */ 654 UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999, 655 "Sony", 656 "PEG Mass Storage", 657 US_SC_DEVICE, US_PR_DEVICE, NULL, 658 US_FL_FIX_INQUIRY ), 659 660 /* floppy reports multiple luns */ 661 UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, 662 "SAMSUNG", 663 "SFD-321U [FW 0C]", 664 US_SC_DEVICE, US_PR_DEVICE, NULL, 665 US_FL_SINGLE_LUN ), 666 667 668 UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, 669 "Y-E Data", 670 "Flashbuster-U", 671 US_SC_DEVICE, US_PR_CB, NULL, 672 US_FL_SINGLE_LUN), 673 674 UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999, 675 "Y-E Data", 676 "Flashbuster-U", 677 US_SC_DEVICE, US_PR_DEVICE, NULL, 678 US_FL_SINGLE_LUN), 679 680 /* Reported by Johann Cardon <johann.cardon@free.fr> 681 * This entry is needed only because the device reports 682 * bInterfaceClass = 0xff (vendor-specific) 683 */ 684 UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, 685 "Y-E Data", 686 "Silicon Media R/W", 687 US_SC_DEVICE, US_PR_DEVICE, NULL, 0), 688 689 /* Reported by RTE <raszilki@yandex.ru> */ 690 UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141, 691 "JetFlash", 692 "TS1GJF2A/120", 693 US_SC_DEVICE, US_PR_DEVICE, NULL, 694 US_FL_MAX_SECTORS_64 ), 695 696 /* Fabrizio Fellini <fello@libero.it> */ 697 UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, 698 "Fujifilm", 699 "Digital Camera EX-20 DSC", 700 US_SC_8070, US_PR_DEVICE, NULL, 0 ), 701 702 /* Reported by Andre Welter <a.r.welter@gmx.de> 703 * This antique device predates the release of the Bulk-only Transport 704 * spec, and if it gets a Get-Max-LUN then it requires the host to do a 705 * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent 706 * us from sending the request. 707 */ 708 UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100, 709 "Iomega", 710 "ZIP 100", 711 US_SC_DEVICE, US_PR_DEVICE, NULL, 712 US_FL_SINGLE_LUN ), 713 714 /* Reported by <Hendryk.Pfeiffer@gmx.de> */ 715 UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000, 716 "LaCie", 717 "DVD+-RW", 718 US_SC_DEVICE, US_PR_DEVICE, NULL, 719 US_FL_GO_SLOW ), 720 721 /* Submitted by Joel Bourquard <numlock@freesurf.ch> 722 * Some versions of this device need the SubClass and Protocol overrides 723 * while others don't. 724 */ 725 UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, 726 "In-System", 727 "PyroGate External CD-ROM Enclosure (FCD-523)", 728 US_SC_SCSI, US_PR_BULK, NULL, 729 US_FL_NEED_OVERRIDE ), 730 731 /* Submitted by Sven Anderson <sven-linux@anderson.de> 732 * There are at least four ProductIDs used for iPods, so I added 0x1202 and 733 * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears 734 * to change with firmware updates, I changed the range to maximum for all 735 * iPod entries. 736 */ 737 UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999, 738 "Apple", 739 "iPod", 740 US_SC_DEVICE, US_PR_DEVICE, NULL, 741 US_FL_FIX_CAPACITY ), 742 743 /* Reported by Avi Kivity <avi@argo.co.il> */ 744 UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999, 745 "Apple", 746 "iPod", 747 US_SC_DEVICE, US_PR_DEVICE, NULL, 748 US_FL_FIX_CAPACITY ), 749 750 UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999, 751 "Apple", 752 "iPod", 753 US_SC_DEVICE, US_PR_DEVICE, NULL, 754 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), 755 756 UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999, 757 "Apple", 758 "iPod", 759 US_SC_DEVICE, US_PR_DEVICE, NULL, 760 US_FL_FIX_CAPACITY ), 761 762 /* 763 * Reported by Tyson Vinson <lornoss@gmail.com> 764 * This particular productId is the iPod Nano 765 */ 766 UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999, 767 "Apple", 768 "iPod", 769 US_SC_DEVICE, US_PR_DEVICE, NULL, 770 US_FL_FIX_CAPACITY ), 771 772 /* Reported by Dan Williams <dcbw@redhat.com> 773 * Option N.V. mobile broadband modems 774 * Ignore driver CD mode and force into modem mode by default. 775 */ 776 777 /* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */ 778 UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999, 779 "Option N.V.", 780 "Mass Storage", 781 US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 782 0), 783 784 /* Reported by Blake Matheny <bmatheny@purdue.edu> */ 785 UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, 786 "Lexar", 787 "USB CF Reader", 788 US_SC_DEVICE, US_PR_DEVICE, NULL, 789 US_FL_FIX_INQUIRY ), 790 791 /* The following two entries are for a Genesys USB to IDE 792 * converter chip, but it changes its ProductId depending 793 * on whether or not a disk or an optical device is enclosed 794 * They were originally reported by Alexander Oltu 795 * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com> 796 * respectively. 797 * 798 * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz 799 * <phil@ipom.com> as these flags were made and hard-coded 800 * special-cases were pulled from scsiglue.c. 801 */ 802 UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, 803 "Genesys Logic", 804 "USB to IDE Optical", 805 US_SC_DEVICE, US_PR_DEVICE, NULL, 806 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), 807 808 UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, 809 "Genesys Logic", 810 "USB to IDE Disk", 811 US_SC_DEVICE, US_PR_DEVICE, NULL, 812 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), 813 814 /* Reported by Ben Efros <ben@pc-doctor.com> */ 815 UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451, 816 "Genesys Logic", 817 "USB to SATA", 818 US_SC_DEVICE, US_PR_DEVICE, NULL, 819 US_FL_SANE_SENSE ), 820 821 /* Reported by Hanno Boeck <hanno@gmx.de> 822 * Taken from the Lycoris Kernel */ 823 UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999, 824 "Vivitar", 825 "Vivicam 35Xx", 826 US_SC_SCSI, US_PR_BULK, NULL, 827 US_FL_FIX_INQUIRY ), 828 829 UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, 830 "TEAC", 831 "Floppy Drive", 832 US_SC_UFI, US_PR_CB, NULL, 0 ), 833 834 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */ 835 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, 836 "SigmaTel", 837 "USBMSC Audio Player", 838 US_SC_DEVICE, US_PR_DEVICE, NULL, 839 US_FL_FIX_CAPACITY ), 840 841 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */ 842 /* Change to bcdDeviceMin (0x0100 to 0x0001) reported by 843 * Thomas Bartosik <tbartdev@gmx-topmail.de> */ 844 UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100, 845 "Prolific Technology Inc.", 846 "Mass Storage Device", 847 US_SC_DEVICE, US_PR_DEVICE, NULL, 848 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), 849 850 /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */ 851 UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101, 852 "Prolific Technology Inc.", 853 "ATAPI-6 Bridge Controller", 854 US_SC_DEVICE, US_PR_DEVICE, NULL, 855 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), 856 857 /* Submitted by Benny Sjostrand <benny@hostmobility.com> */ 858 UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001, 859 "Minolta", 860 "Dimage F300", 861 US_SC_SCSI, US_PR_BULK, NULL, 0 ), 862 863 /* Reported by Miguel A. Fosas <amn3s1a@ono.com> */ 864 UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, 865 "Minolta", 866 "DIMAGE E223", 867 US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), 868 869 UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, 870 "Hagiwara", 871 "Flashgate", 872 US_SC_SCSI, US_PR_BULK, NULL, 0 ), 873 874 /* Reported by David Hamilton <niftimusmaximus@lycos.com> */ 875 UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, 876 "Thomson Multimedia Inc.", 877 "RCA RD1080 MP3 Player", 878 US_SC_DEVICE, US_PR_DEVICE, NULL, 879 US_FL_FIX_CAPACITY ), 880 881 /* Reported by Adrian Pilchowiec <adi1981@epf.pl> */ 882 UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, 883 "RockChip", 884 "MP3", 885 US_SC_DEVICE, US_PR_DEVICE, NULL, 886 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), 887 888 /* Reported by Jean-Baptiste Onofre <jb@nanthrax.net> 889 * Support the following product : 890 * "Dane-Elec MediaTouch" 891 */ 892 UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, 893 "RockChip", 894 "MTP", 895 US_SC_DEVICE, US_PR_DEVICE, NULL, 896 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), 897 898 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> 899 * This USB MP3/AVI player device fails and disconnects if more than 128 900 * sectors (64kB) are read/written in a single command, and may be present 901 * at least in the following products: 902 * "Magnex Digital Video Panel DVP 1800" 903 * "MP4 AIGO 4GB SLOT SD" 904 * "Teclast TL-C260 MP3" 905 * "i.Meizu PMP MP3/MP4" 906 * "Speed MV8 MP4 Audio Player" 907 */ 908 UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100, 909 "RockChip", 910 "ROCK MP3", 911 US_SC_DEVICE, US_PR_DEVICE, NULL, 912 US_FL_MAX_SECTORS_64), 913 914 /* Reported by Olivier Blondeau <zeitoun@gmail.com> */ 915 UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100, 916 "ATMEL", 917 "SND1 Storage", 918 US_SC_DEVICE, US_PR_DEVICE, NULL, 919 US_FL_IGNORE_RESIDUE), 920 921 /* Submitted by Roman Hodek <roman@hodek.net> */ 922 UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, 923 "Sandisk", 924 "ImageMate SDDR-05a", 925 US_SC_SCSI, US_PR_CB, NULL, 926 US_FL_SINGLE_LUN ), 927 928 UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009, 929 "SanDisk Corporation", 930 "ImageMate CompactFlash USB", 931 US_SC_DEVICE, US_PR_DEVICE, NULL, 932 US_FL_FIX_CAPACITY ), 933 934 UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, 935 "Sandisk", 936 "ImageMate SDDR-12", 937 US_SC_SCSI, US_PR_CB, NULL, 938 US_FL_SINGLE_LUN ), 939 940 /* Reported by Eero Volotinen <eero@ping-viini.org> */ 941 UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, 942 "Freecom Technologies", 943 "FHD-Classic", 944 US_SC_DEVICE, US_PR_DEVICE, NULL, 945 US_FL_FIX_CAPACITY), 946 947 UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, 948 "Microtech", 949 "USB-SCSI-DB25", 950 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 951 US_FL_SCM_MULT_TARG ), 952 953 UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, 954 "Microtech", 955 "USB-SCSI-HD50", 956 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, 957 US_FL_SCM_MULT_TARG ), 958 959 #ifdef NO_SDDR09 960 UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, 961 "Microtech", 962 "CameraMate", 963 US_SC_SCSI, US_PR_CB, NULL, 964 US_FL_SINGLE_LUN ), 965 #endif 966 967 /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 968 * Only revision 1.13 tested (same for all of the above devices, 969 * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. 970 * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>. 971 * See also http://martin.wilck.bei.t-online.de/#kecf . 972 */ 973 UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, 974 "Datafab", 975 "KECF-USB", 976 US_SC_DEVICE, US_PR_DEVICE, NULL, 977 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), 978 979 /* Reported by Rauch Wolke <rauchwolke@gmx.net> 980 * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882) 981 */ 982 UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, 983 "Simple Tech/Datafab", 984 "CF+SM Reader", 985 US_SC_DEVICE, US_PR_DEVICE, NULL, 986 US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ), 987 988 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant 989 * to the USB storage specification in two ways: 990 * - They tell us they are using transport protocol CBI. In reality they 991 * are using transport protocol CB. 992 * - They don't like the INQUIRY command. So we must handle this command 993 * of the SCSI layer ourselves. 994 * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have 995 * bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB). 996 * So don't remove the US_PR_CB override! 997 * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override. 998 */ 999 UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, 1000 "Casio", 1001 "QV DigitalCamera", 1002 US_SC_8070, US_PR_CB, NULL, 1003 US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ), 1004 1005 /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/ 1006 UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, 1007 "Samsung", 1008 "Digimax 410", 1009 US_SC_DEVICE, US_PR_DEVICE, NULL, 1010 US_FL_FIX_INQUIRY), 1011 1012 /* Reported by Luciano Rocha <luciano@eurotux.com> */ 1013 UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, 1014 "Argosy", 1015 "Storage", 1016 US_SC_DEVICE, US_PR_DEVICE, NULL, 1017 US_FL_FIX_CAPACITY), 1018 1019 /* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */ 1020 UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, 1021 "Argosy", 1022 "Storage", 1023 US_SC_DEVICE, US_PR_DEVICE, NULL, 1024 US_FL_FIX_CAPACITY), 1025 1026 /* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */ 1027 UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, 1028 "Argosy", 1029 "Storage", 1030 US_SC_DEVICE, US_PR_DEVICE, NULL, 1031 US_FL_FIX_CAPACITY), 1032 1033 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. 1034 * Flag will support Bulk devices which use a standards-violating 32-byte 1035 * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with 1036 * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support. 1037 */ 1038 1039 UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, 1040 "Grandtech", 1041 "DC2MEGA", 1042 US_SC_DEVICE, US_PR_DEVICE, NULL, 1043 US_FL_BULK32), 1044 1045 /* Andrew Lunn <andrew@lunn.ch> 1046 * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL 1047 * on LUN 4. 1048 * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera" 1049 */ 1050 UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200, 1051 "PanDigital", 1052 "Photo Frame", 1053 US_SC_DEVICE, US_PR_DEVICE, NULL, 1054 US_FL_NOT_LOCKABLE), 1055 1056 /* Submitted by Jan De Luyck <lkml@kcore.org> */ 1057 UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, 1058 "CITIZEN", 1059 "X1DE-USB", 1060 US_SC_DEVICE, US_PR_DEVICE, NULL, 1061 US_FL_SINGLE_LUN), 1062 1063 /* Submitted by Dylan Taft <d13f00l@gmail.com> 1064 * US_FL_IGNORE_RESIDUE Needed 1065 */ 1066 UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100, 1067 "AIPTEK", 1068 "Aiptek USB Keychain MP3 Player", 1069 US_SC_DEVICE, US_PR_DEVICE, NULL, 1070 US_FL_IGNORE_RESIDUE), 1071 1072 /* Entry needed for flags. Moreover, all devices with this ID use 1073 * bulk-only transport, but _some_ falsely report Control/Bulk instead. 1074 * One example is "Trumpion Digital Research MYMP3". 1075 * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de> 1076 */ 1077 UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, 1078 "Trumpion", 1079 "t33520 USB Flash Card Controller", 1080 US_SC_DEVICE, US_PR_BULK, NULL, 1081 US_FL_NEED_OVERRIDE ), 1082 1083 /* Reported by Filippo Bardelli <filibard@libero.it> 1084 * The device reports a subclass of RBC, which is wrong. 1085 */ 1086 UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, 1087 "Trumpion Microelectronics, Inc.", 1088 "33520 USB Digital Voice Recorder", 1089 US_SC_UFI, US_PR_DEVICE, NULL, 1090 0), 1091 1092 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ 1093 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, 1094 "Trumpion", 1095 "MP3 player", 1096 US_SC_RBC, US_PR_BULK, NULL, 1097 0 ), 1098 1099 /* aeb */ 1100 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, 1101 "Feiya", 1102 "5-in-1 Card Reader", 1103 US_SC_DEVICE, US_PR_DEVICE, NULL, 1104 US_FL_FIX_CAPACITY ), 1105 1106 /* This Pentax still camera is not conformant 1107 * to the USB storage specification: - 1108 * - It does not like the INQUIRY command. So we must handle this command 1109 * of the SCSI layer ourselves. 1110 * Tested on Rev. 10.00 (0x1000) 1111 * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk> 1112 */ 1113 UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, 1114 "Pentax", 1115 "Optio 2/3/400", 1116 US_SC_DEVICE, US_PR_DEVICE, NULL, 1117 US_FL_FIX_INQUIRY ), 1118 1119 /* These are virtual windows driver CDs, which the zd1211rw driver 1120 * automatically converts into WLAN devices. */ 1121 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, 1122 "ZyXEL", 1123 "G-220F USB-WLAN Install", 1124 US_SC_DEVICE, US_PR_DEVICE, NULL, 1125 US_FL_IGNORE_DEVICE ), 1126 1127 UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, 1128 "SiteCom", 1129 "WL-117 USB-WLAN Install", 1130 US_SC_DEVICE, US_PR_DEVICE, NULL, 1131 US_FL_IGNORE_DEVICE ), 1132 1133 /* Reported by Dan Williams <dcbw@redhat.com> 1134 * Option N.V. mobile broadband modems 1135 * Ignore driver CD mode and force into modem mode by default. 1136 */ 1137 1138 /* iCON 225 */ 1139 UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999, 1140 "Option N.V.", 1141 "Mass Storage", 1142 US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 1143 0), 1144 1145 /* Reported by F. Aben <f.aben@option.com> 1146 * This device (wrongly) has a vendor-specific device descriptor. 1147 * The entry is needed so usb-storage can bind to it's mass-storage 1148 * interface as an interface driver */ 1149 UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, 1150 "Option", 1151 "GI 0401 SD-Card", 1152 US_SC_DEVICE, US_PR_DEVICE, NULL, 1153 0 ), 1154 1155 /* Reported by Jan Dumon <j.dumon@option.com> 1156 * This device (wrongly) has a vendor-specific device descriptor. 1157 * The entry is needed so usb-storage can bind to it's mass-storage 1158 * interface as an interface driver */ 1159 UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, 1160 "Option", 1161 "GI 0431 SD-Card", 1162 US_SC_DEVICE, US_PR_DEVICE, NULL, 1163 0 ), 1164 1165 /* Reported by Ben Efros <ben@pc-doctor.com> */ 1166 UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, 1167 "Seagate", 1168 "FreeAgent Pro", 1169 US_SC_DEVICE, US_PR_DEVICE, NULL, 1170 US_FL_SANE_SENSE ), 1171 1172 UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999, 1173 "Maxtor", 1174 "USB to SATA", 1175 US_SC_DEVICE, US_PR_DEVICE, NULL, 1176 US_FL_SANE_SENSE), 1177 1178 /* 1179 * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688. 1180 * The device blatantly ignores LUN and returns 1 in GetMaxLUN. 1181 */ 1182 UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100, 1183 "Unknown", 1184 "Unknown", 1185 US_SC_DEVICE, US_PR_DEVICE, NULL, 1186 US_FL_SINGLE_LUN ), 1187 1188 /* Submitted by Joris Struyve <joris@struyve.be> */ 1189 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, 1190 "Medion", 1191 "MD 7425", 1192 US_SC_DEVICE, US_PR_DEVICE, NULL, 1193 US_FL_FIX_INQUIRY), 1194 1195 /* 1196 * Entry for Jenoptik JD 5200z3 1197 * 1198 * email: car.busse@gmx.de 1199 */ 1200 UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200, 1201 "Jenoptik", 1202 "JD 5200 z3", 1203 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), 1204 1205 /* Reported by Jason Johnston <killean@shaw.ca> */ 1206 UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000, 1207 "Macpower Technology Co.LTD.", 1208 "USB 2.0 3.5\" DEVICE", 1209 US_SC_DEVICE, US_PR_DEVICE, NULL, 1210 US_FL_FIX_CAPACITY), 1211 1212 /* Reported by Lubomir Blaha <tritol@trilogic.cz> 1213 * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this 1214 * works for me. Can anybody correct these values? (I able to test corrected 1215 * version.) 1216 */ 1217 UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff, 1218 "Netac", 1219 "USB-CF-Card", 1220 US_SC_DEVICE, US_PR_DEVICE, NULL, 1221 US_FL_FIX_INQUIRY ), 1222 1223 /* Reported by Edward Chapman (taken from linux-usb mailing list) 1224 Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */ 1225 UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999, 1226 "Netac", 1227 "USB Flash Disk", 1228 US_SC_DEVICE, US_PR_DEVICE, NULL, 1229 US_FL_IGNORE_RESIDUE ), 1230 1231 1232 /* Patch by Stephan Walter <stephan.walter@epfl.ch> 1233 * I don't know why, but it works... */ 1234 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012, 1235 "WINWARD", 1236 "Music Disk", 1237 US_SC_DEVICE, US_PR_DEVICE, NULL, 1238 US_FL_IGNORE_RESIDUE ), 1239 1240 /* Reported by Ian McConnell <ian at emit.demon.co.uk> */ 1241 UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012, 1242 "PNP_MP3", 1243 "PNP_MP3 PLAYER", 1244 US_SC_DEVICE, US_PR_DEVICE, NULL, 1245 US_FL_IGNORE_RESIDUE ), 1246 1247 /* Reported by Jim McCloskey <mcclosk@ucsc.edu> */ 1248 UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100, 1249 "Cowon Systems", 1250 "iAUDIO M5", 1251 US_SC_DEVICE, US_PR_BULK, NULL, 1252 US_FL_NEED_OVERRIDE ), 1253 1254 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */ 1255 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, 1256 "USB", 1257 "Solid state disk", 1258 US_SC_DEVICE, US_PR_DEVICE, NULL, 1259 US_FL_FIX_INQUIRY ), 1260 1261 /* Submitted by Daniel Drake <dsd@gentoo.org> 1262 * Reported by dayul on the Gentoo Forums */ 1263 UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110, 1264 "Ours Technology", 1265 "Flash Disk", 1266 US_SC_DEVICE, US_PR_DEVICE, NULL, 1267 US_FL_IGNORE_RESIDUE ), 1268 1269 /* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */ 1270 UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110, 1271 "USB", 1272 "Flash Disk", 1273 US_SC_DEVICE, US_PR_DEVICE, NULL, 1274 US_FL_IGNORE_RESIDUE ), 1275 1276 /* Reported by Benjamin Schiller <sbenni@gmx.de> 1277 * It is also sold by Easylite as DJ 20 */ 1278 UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, 1279 "Typhoon", 1280 "My DJ 1820", 1281 US_SC_DEVICE, US_PR_DEVICE, NULL, 1282 US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), 1283 1284 /* Patch by Leonid Petrov mail at lpetrov.net 1285 * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org> 1286 * http://www.qbik.ch/usb/devices/showdev.php?id=1705 1287 * Updated to 103 device by MJ Ray mjr at phonecoop.coop 1288 */ 1289 UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100, 1290 "Oracom Co., Ltd", 1291 "ORC-200M", 1292 US_SC_DEVICE, US_PR_DEVICE, NULL, 1293 US_FL_IGNORE_RESIDUE ), 1294 1295 /* David Kuehling <dvdkhlng@gmx.de>: 1296 * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI 1297 * errors when trying to write. 1298 */ 1299 UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, 1300 "C-MEX", 1301 "A-VOX", 1302 US_SC_DEVICE, US_PR_DEVICE, NULL, 1303 US_FL_IGNORE_RESIDUE ), 1304 1305 /* Jeremy Katz <katzj@redhat.com>: 1306 * The Blackberry Pearl can run in two modes; a usb-storage only mode 1307 * and a mode that allows access via mass storage and to its database. 1308 * The berry_charge module will set the device to dual mode and thus we 1309 * should ignore its native mode if that module is built 1310 */ 1311 #ifdef CONFIG_USB_BERRY_CHARGE 1312 UNUSUAL_DEV( 0x0fca, 0x0006, 0x0001, 0x0001, 1313 "RIM", 1314 "Blackberry Pearl", 1315 US_SC_DEVICE, US_PR_DEVICE, NULL, 1316 US_FL_IGNORE_DEVICE ), 1317 #endif 1318 1319 /* Reported by Michael Stattmann <michael@stattmann.com> */ 1320 UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, 1321 "Sony Ericsson", 1322 "V800-Vodafone 802", 1323 US_SC_DEVICE, US_PR_DEVICE, NULL, 1324 US_FL_NO_WP_DETECT ), 1325 1326 /* Reported by The Solutor <thesolutor@gmail.com> */ 1327 UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, 1328 "Sony Ericsson", 1329 "MD400", 1330 US_SC_DEVICE, US_PR_DEVICE, NULL, 1331 US_FL_IGNORE_DEVICE), 1332 1333 /* Reported by Jan Mate <mate@fiit.stuba.sk> 1334 * and by Soeren Sonnenburg <kernel@nn7.de> */ 1335 UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, 1336 "Sony Ericsson", 1337 "P990i", 1338 US_SC_DEVICE, US_PR_DEVICE, NULL, 1339 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), 1340 1341 /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */ 1342 UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, 1343 "Sony Ericsson", 1344 "M600i", 1345 US_SC_DEVICE, US_PR_DEVICE, NULL, 1346 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 1347 1348 /* Reported by Ricardo Barberis <ricardo@dattatec.com> */ 1349 UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000, 1350 "Sony Ericsson", 1351 "P1i", 1352 US_SC_DEVICE, US_PR_DEVICE, NULL, 1353 US_FL_IGNORE_RESIDUE ), 1354 1355 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> 1356 * Tested on hardware version 1.10. 1357 * Entry is needed only for the initializer function override. 1358 * Devices with bcd > 110 seem to not need it while those 1359 * with bcd < 110 appear to need it. 1360 */ 1361 UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110, 1362 "Desknote", 1363 "UCR-61S2B", 1364 US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, 1365 0 ), 1366 1367 UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999, 1368 "Western Digital", 1369 "External HDD", 1370 US_SC_DEVICE, US_PR_DEVICE, NULL, 1371 US_FL_SANE_SENSE), 1372 1373 /* Reported by Fabio Venturi <f.venturi@tdnet.it> 1374 * The device reports a vendor-specific bDeviceClass. 1375 */ 1376 UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, 1377 "Actions Semiconductor", 1378 "Mtp device", 1379 US_SC_DEVICE, US_PR_DEVICE, NULL, 1380 0), 1381 1382 /* Reported by Pascal Terjan <pterjan@mandriva.com> 1383 * Ignore driver CD mode and force into modem mode by default. 1384 */ 1385 UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, 1386 "D-Link", 1387 "USB Mass Storage", 1388 US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0), 1389 1390 /* Reported by Kevin Lloyd <linux@sierrawireless.com> 1391 * Entry is needed for the initializer function override, 1392 * which instructs the device to load as a modem 1393 * device. 1394 */ 1395 UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, 1396 "Sierra Wireless", 1397 "USB MMC Storage", 1398 US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init, 1399 0), 1400 1401 /* Reported by Jaco Kroon <jaco@kroon.co.za> 1402 * The usb-storage module found on the Digitech GNX4 (and supposedly other 1403 * devices) misbehaves and causes a bunch of invalid I/O errors. 1404 */ 1405 UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, 1406 "Digitech HMG", 1407 "DigiTech Mass Storage", 1408 US_SC_DEVICE, US_PR_DEVICE, NULL, 1409 US_FL_IGNORE_RESIDUE ), 1410 1411 /* Reported by fangxiaozhi <huananhu@huawei.com> 1412 * This brings the HUAWEI data card devices into multi-port mode 1413 */ 1414 UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, 1415 "HUAWEI MOBILE", 1416 "Mass Storage", 1417 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1418 0), 1419 UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, 1420 "HUAWEI MOBILE", 1421 "Mass Storage", 1422 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1423 0), 1424 UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, 1425 "HUAWEI MOBILE", 1426 "Mass Storage", 1427 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1428 0), 1429 UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, 1430 "HUAWEI MOBILE", 1431 "Mass Storage", 1432 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1433 0), 1434 UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000, 1435 "HUAWEI MOBILE", 1436 "Mass Storage", 1437 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1438 0), 1439 UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, 1440 "HUAWEI MOBILE", 1441 "Mass Storage", 1442 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1443 0), 1444 UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000, 1445 "HUAWEI MOBILE", 1446 "Mass Storage", 1447 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1448 0), 1449 UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, 1450 "HUAWEI MOBILE", 1451 "Mass Storage", 1452 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1453 0), 1454 UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, 1455 "HUAWEI MOBILE", 1456 "Mass Storage", 1457 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1458 0), 1459 UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000, 1460 "HUAWEI MOBILE", 1461 "Mass Storage", 1462 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1463 0), 1464 UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, 1465 "HUAWEI MOBILE", 1466 "Mass Storage", 1467 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1468 0), 1469 UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, 1470 "HUAWEI MOBILE", 1471 "Mass Storage", 1472 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1473 0), 1474 UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000, 1475 "HUAWEI MOBILE", 1476 "Mass Storage", 1477 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1478 0), 1479 UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000, 1480 "HUAWEI MOBILE", 1481 "Mass Storage", 1482 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1483 0), 1484 UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000, 1485 "HUAWEI MOBILE", 1486 "Mass Storage", 1487 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1488 0), 1489 UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000, 1490 "HUAWEI MOBILE", 1491 "Mass Storage", 1492 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1493 0), 1494 UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000, 1495 "HUAWEI MOBILE", 1496 "Mass Storage", 1497 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1498 0), 1499 UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000, 1500 "HUAWEI MOBILE", 1501 "Mass Storage", 1502 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1503 0), 1504 UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, 1505 "HUAWEI MOBILE", 1506 "Mass Storage", 1507 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1508 0), 1509 UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, 1510 "HUAWEI MOBILE", 1511 "Mass Storage", 1512 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1513 0), 1514 UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, 1515 "HUAWEI MOBILE", 1516 "Mass Storage", 1517 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1518 0), 1519 UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, 1520 "HUAWEI MOBILE", 1521 "Mass Storage", 1522 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1523 0), 1524 UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, 1525 "HUAWEI MOBILE", 1526 "Mass Storage", 1527 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1528 0), 1529 UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, 1530 "HUAWEI MOBILE", 1531 "Mass Storage", 1532 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1533 0), 1534 UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, 1535 "HUAWEI MOBILE", 1536 "Mass Storage", 1537 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1538 0), 1539 UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, 1540 "HUAWEI MOBILE", 1541 "Mass Storage", 1542 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1543 0), 1544 UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, 1545 "HUAWEI MOBILE", 1546 "Mass Storage", 1547 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1548 0), 1549 UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, 1550 "HUAWEI MOBILE", 1551 "Mass Storage", 1552 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1553 0), 1554 UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000, 1555 "HUAWEI MOBILE", 1556 "Mass Storage", 1557 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1558 0), 1559 UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000, 1560 "HUAWEI MOBILE", 1561 "Mass Storage", 1562 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1563 0), 1564 UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000, 1565 "HUAWEI MOBILE", 1566 "Mass Storage", 1567 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1568 0), 1569 UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000, 1570 "HUAWEI MOBILE", 1571 "Mass Storage", 1572 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1573 0), 1574 UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000, 1575 "HUAWEI MOBILE", 1576 "Mass Storage", 1577 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1578 0), 1579 UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000, 1580 "HUAWEI MOBILE", 1581 "Mass Storage", 1582 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1583 0), 1584 UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000, 1585 "HUAWEI MOBILE", 1586 "Mass Storage", 1587 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1588 0), 1589 UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000, 1590 "HUAWEI MOBILE", 1591 "Mass Storage", 1592 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1593 0), 1594 UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000, 1595 "HUAWEI MOBILE", 1596 "Mass Storage", 1597 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1598 0), 1599 UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000, 1600 "HUAWEI MOBILE", 1601 "Mass Storage", 1602 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1603 0), 1604 UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000, 1605 "HUAWEI MOBILE", 1606 "Mass Storage", 1607 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1608 0), 1609 UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000, 1610 "HUAWEI MOBILE", 1611 "Mass Storage", 1612 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1613 0), 1614 UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000, 1615 "HUAWEI MOBILE", 1616 "Mass Storage", 1617 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1618 0), 1619 UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000, 1620 "HUAWEI MOBILE", 1621 "Mass Storage", 1622 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1623 0), 1624 UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000, 1625 "HUAWEI MOBILE", 1626 "Mass Storage", 1627 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1628 0), 1629 UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000, 1630 "HUAWEI MOBILE", 1631 "Mass Storage", 1632 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1633 0), 1634 UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000, 1635 "HUAWEI MOBILE", 1636 "Mass Storage", 1637 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1638 0), 1639 UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000, 1640 "HUAWEI MOBILE", 1641 "Mass Storage", 1642 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1643 0), 1644 UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000, 1645 "HUAWEI MOBILE", 1646 "Mass Storage", 1647 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1648 0), 1649 UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000, 1650 "HUAWEI MOBILE", 1651 "Mass Storage", 1652 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1653 0), 1654 UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000, 1655 "HUAWEI MOBILE", 1656 "Mass Storage", 1657 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1658 0), 1659 UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000, 1660 "HUAWEI MOBILE", 1661 "Mass Storage", 1662 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1663 0), 1664 UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000, 1665 "HUAWEI MOBILE", 1666 "Mass Storage", 1667 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1668 0), 1669 UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000, 1670 "HUAWEI MOBILE", 1671 "Mass Storage", 1672 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1673 0), 1674 UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000, 1675 "HUAWEI MOBILE", 1676 "Mass Storage", 1677 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1678 0), 1679 UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000, 1680 "HUAWEI MOBILE", 1681 "Mass Storage", 1682 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1683 0), 1684 UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000, 1685 "HUAWEI MOBILE", 1686 "Mass Storage", 1687 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1688 0), 1689 UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000, 1690 "HUAWEI MOBILE", 1691 "Mass Storage", 1692 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1693 0), 1694 UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000, 1695 "HUAWEI MOBILE", 1696 "Mass Storage", 1697 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1698 0), 1699 UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000, 1700 "HUAWEI MOBILE", 1701 "Mass Storage", 1702 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1703 0), 1704 UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000, 1705 "HUAWEI MOBILE", 1706 "Mass Storage", 1707 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1708 0), 1709 UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000, 1710 "HUAWEI MOBILE", 1711 "Mass Storage", 1712 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1713 0), 1714 UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000, 1715 "HUAWEI MOBILE", 1716 "Mass Storage", 1717 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1718 0), 1719 UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000, 1720 "HUAWEI MOBILE", 1721 "Mass Storage", 1722 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1723 0), 1724 UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000, 1725 "HUAWEI MOBILE", 1726 "Mass Storage", 1727 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1728 0), 1729 UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000, 1730 "HUAWEI MOBILE", 1731 "Mass Storage", 1732 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1733 0), 1734 UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000, 1735 "HUAWEI MOBILE", 1736 "Mass Storage", 1737 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1738 0), 1739 UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000, 1740 "HUAWEI MOBILE", 1741 "Mass Storage", 1742 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 1743 0), 1744 1745 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */ 1746 UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001, 1747 "Minolta", 1748 "Dimage Z10", 1749 US_SC_DEVICE, US_PR_DEVICE, NULL, 1750 0 ), 1751 1752 /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */ 1753 UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, 1754 "SWISSBIT", 1755 "Black Silver", 1756 US_SC_DEVICE, US_PR_DEVICE, NULL, 1757 US_FL_IGNORE_RESIDUE ), 1758 1759 /* Reported by Francesco Foresti <frafore@tiscali.it> */ 1760 UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, 1761 "Super Top", 1762 "IDE DEVICE", 1763 US_SC_DEVICE, US_PR_DEVICE, NULL, 1764 US_FL_IGNORE_RESIDUE ), 1765 1766 /* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br> 1767 * JMicron responds to USN and several other SCSI ioctls with a 1768 * residue that causes subsequent I/O requests to fail. */ 1769 UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, 1770 "JMicron", 1771 "USB to ATA/ATAPI Bridge", 1772 US_SC_DEVICE, US_PR_DEVICE, NULL, 1773 US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), 1774 1775 /* Reported by Robert Schedel <r.schedel@yahoo.de> 1776 * Note: this is a 'super top' device like the above 14cd/6600 device */ 1777 UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, 1778 "Teac", 1779 "HD-35PUK-B", 1780 US_SC_DEVICE, US_PR_DEVICE, NULL, 1781 US_FL_IGNORE_RESIDUE ), 1782 1783 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, 1784 "ST", 1785 "2A", 1786 US_SC_DEVICE, US_PR_DEVICE, NULL, 1787 US_FL_FIX_CAPACITY), 1788 1789 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org> 1790 * and Renato Perini <rperini@email.it> 1791 */ 1792 UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, 1793 "Motorola", 1794 "RAZR V3x", 1795 US_SC_DEVICE, US_PR_DEVICE, NULL, 1796 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), 1797 1798 /* 1799 * Patch by Constantin Baranov <const@tltsu.ru> 1800 * Report by Andreas Koenecke. 1801 * Motorola ROKR Z6. 1802 */ 1803 UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101, 1804 "Motorola", 1805 "MSnc.", 1806 US_SC_DEVICE, US_PR_DEVICE, NULL, 1807 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG), 1808 1809 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */ 1810 UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, 1811 "MPIO", 1812 "HS200", 1813 US_SC_DEVICE, US_PR_DEVICE, NULL, 1814 US_FL_GO_SLOW ), 1815 1816 /* Reported by Rohan Hart <rohan.hart17@gmail.com> */ 1817 UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, 1818 "INTOVA", 1819 "Pixtreme", 1820 US_SC_DEVICE, US_PR_DEVICE, NULL, 1821 US_FL_FIX_CAPACITY ), 1822 1823 /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com> 1824 * Mio Moov 330 1825 */ 1826 UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000, 1827 "Mitac", 1828 "Mio DigiWalker USB Sync", 1829 US_SC_DEVICE,US_PR_DEVICE,NULL, 1830 US_FL_MAX_SECTORS_64 ), 1831 1832 /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */ 1833 UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100, 1834 "iRiver", 1835 "MP3 T10", 1836 US_SC_DEVICE, US_PR_DEVICE, NULL, 1837 US_FL_IGNORE_RESIDUE ), 1838 1839 /* 1840 * David Härdeman <david@2gen.com> 1841 * The key makes the SCSI stack print confusing (but harmless) messages 1842 */ 1843 UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, 1844 "Iomega", 1845 "Micro Mini 1GB", 1846 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), 1847 1848 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */ 1849 UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, 1850 "DataStor", 1851 "USB4500 FW1.04", 1852 US_SC_DEVICE, US_PR_DEVICE, NULL, 1853 US_FL_CAPACITY_HEURISTICS), 1854 1855 /* Reported by Alessio Treglia <quadrispro@ubuntu.com> */ 1856 UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, 1857 "TGE", 1858 "Digital MP3 Audio Player", 1859 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), 1860 1861 /* Control/Bulk transport for all SubClass values */ 1862 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), 1863 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), 1864 USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR), 1865 USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR), 1866 USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR), 1867 USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR), 1868 1869 /* Control/Bulk/Interrupt transport for all SubClass values */ 1870 USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR), 1871 USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR), 1872 USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR), 1873 USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR), 1874 USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR), 1875 USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR), 1876 1877 /* Bulk-only transport for all SubClass values */ 1878 USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR), 1879 USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR), 1880 USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR), 1881 USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR), 1882 USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR), 1883 USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0), 1884