1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Driver for USB Mass Storage compliant devices 4 * Unusual Devices File 5 * 6 * Current development and maintenance by: 7 * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) 8 * 9 * Initial work by: 10 * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. 11 */ 12 13 /* 14 * IMPORTANT NOTE: This file must be included in another file which does 15 * the following thing for it to work: 16 * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined 17 * before this file is included. 18 */ 19 20 /* 21 * If you edit this file, please try to keep it sorted first by VendorID, 22 * then by ProductID. 23 * 24 * If you want to add an entry for this file, be sure to include the 25 * following information: 26 * - a patch that adds the entry for your device, including your 27 * email address right above the entry (plus maybe a brief 28 * explanation of the reason for the entry), 29 * - a copy of /sys/kernel/debug/usb/devices with your device plugged in 30 * running with this patch. 31 * Send your submission to the USB development list <linux-usb@vger.kernel.org> 32 */ 33 34 /* 35 * Note: If you add an entry only in order to set the CAPACITY_OK flag, 36 * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is 37 * because such entries mark devices which actually work correctly, 38 * as opposed to devices that do something strangely or wrongly. 39 */ 40 41 /* 42 * In-kernel mode switching is deprecated. Do not add new devices to 43 * this list for the sole purpose of switching them to a different 44 * mode. Existing userspace solutions are superior. 45 * 46 * New mode switching devices should instead be added to the database 47 * maintained at http://www.draisberghof.de/usb_modeswitch/ 48 */ 49 50 #if !defined(CONFIG_USB_STORAGE_SDDR09) && \ 51 !defined(CONFIG_USB_STORAGE_SDDR09_MODULE) 52 #define NO_SDDR09 53 #endif 54 55 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> */ 56 UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, 57 "ATMEL", 58 "SND1 Storage", 59 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 60 US_FL_IGNORE_RESIDUE), 61 62 /* Reported by Rodolfo Quesada <rquesada@roqz.net> */ 63 UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003, 64 "VIA Technologies Inc.", 65 "Mitsumi multi cardreader", 66 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 67 US_FL_IGNORE_RESIDUE ), 68 69 UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, 70 "HP", 71 "CD-Writer+", 72 USB_SC_8070, USB_PR_CB, NULL, 0), 73 74 /* Reported by Ben Efros <ben@pc-doctor.com> */ 75 UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000, 76 "HP", 77 "Personal Media Drive", 78 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 79 US_FL_SANE_SENSE ), 80 81 /* 82 * Reported by Grant Grundler <grundler@parisc-linux.org> 83 * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware. 84 */ 85 UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001, 86 "HP", 87 "PhotoSmart R707", 88 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), 89 90 UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999, 91 "Adaptec", 92 "USBConnect 2000", 93 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 94 US_FL_SCM_MULT_TARG ), 95 96 /* 97 * Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net> 98 * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product) 99 * for USB floppies that need the SINGLE_LUN enforcement. 100 */ 101 UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, 102 "NEC", 103 "NEC USB UF000x", 104 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 105 US_FL_SINGLE_LUN ), 106 107 /* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */ 108 UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, 109 "VIA Technologies Inc.", 110 "USB 2.0 Card Reader", 111 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 112 US_FL_IGNORE_RESIDUE ), 113 114 /* 115 * Deduced by Jonathan Woithe <jwoithe@just42.net> 116 * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message 117 * always fails and confuses drive. 118 */ 119 UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, 120 "Buffalo", 121 "DUB-P40G HDD", 122 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 123 US_FL_FIX_INQUIRY ), 124 125 /* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */ 126 UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100, 127 "Samsung Info. Systems America, Inc.", 128 "MP3 Player", 129 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 130 US_FL_IGNORE_RESIDUE ), 131 132 /* Reported by Orgad Shaneh <orgads@gmail.com> */ 133 UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100, 134 "Samsung", "MP3 Player", 135 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 136 US_FL_IGNORE_RESIDUE ), 137 138 /* Reported by Christian Leber <christian@leber.de> */ 139 UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100, 140 "TrekStor", 141 "i.Beat 115 2.0", 142 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 143 US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ), 144 145 /* Reported by Stefan Werner <dustbln@gmx.de> */ 146 UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, 147 "TrekStor", 148 "i.Beat Joy 2.0", 149 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 150 US_FL_IGNORE_RESIDUE ), 151 152 /* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */ 153 UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, 154 "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */ 155 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 156 US_FL_IGNORE_RESIDUE ), 157 158 /* 159 * Reported by Andrew Nayenko <relan@bk.ru> 160 * Updated for new firmware by Phillip Potter <phil@philpotter.co.uk> 161 */ 162 UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, 163 "Nokia", 164 "Nokia 6288", 165 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 166 US_FL_MAX_SECTORS_64 ), 167 168 /* Reported by Mario Rettig <mariorettig@web.de> */ 169 UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, 170 "Nokia", 171 "Nokia 3250", 172 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 173 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 174 175 /* Reported by <honkkis@gmail.com> */ 176 UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100, 177 "Nokia", 178 "E70", 179 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 180 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 181 182 /* Reported by Jon Hart <Jon.Hart@web.de> */ 183 UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100, 184 "Nokia", 185 "E60", 186 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 187 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), 188 189 /* 190 * Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and 191 * Einar Th. Einarsson <einarthered@gmail.com> 192 */ 193 UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, 194 "Nokia", 195 "N91", 196 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 197 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 198 199 /* 200 * Reported by Jiri Slaby <jirislaby@gmail.com> and 201 * Rene C. Castberg <Rene@Castberg.org> 202 */ 203 UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100, 204 "Nokia", 205 "N80", 206 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 207 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 208 209 /* Reported by Matthew Bloch <matthew@bytemark.co.uk> */ 210 UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100, 211 "Nokia", 212 "E61", 213 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 214 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 215 216 /* Reported by Bardur Arantsson <bardur@scientician.net> */ 217 UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610, 218 "Nokia", 219 "6131", 220 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 221 US_FL_MAX_SECTORS_64 ), 222 223 /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */ 224 UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999, 225 "Nokia", 226 "Nokia 6233", 227 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 228 US_FL_MAX_SECTORS_64 ), 229 230 /* Reported by Alex Corcoles <alex@corcoles.net> */ 231 UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, 232 "Nokia", 233 "6234", 234 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 235 US_FL_MAX_SECTORS_64 ), 236 237 /* Reported by Daniele Forsi <dforsi@gmail.com> */ 238 UNUSUAL_DEV( 0x0421, 0x04b9, 0x0350, 0x0350, 239 "Nokia", 240 "5300", 241 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 242 US_FL_MAX_SECTORS_64 ), 243 244 /* Patch submitted by Victor A. Santos <victoraur.santos@gmail.com> */ 245 UNUSUAL_DEV( 0x0421, 0x05af, 0x0742, 0x0742, 246 "Nokia", 247 "305", 248 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 249 US_FL_MAX_SECTORS_64), 250 251 /* Patch submitted by Mikhail Zolotaryov <lebon@lebon.org.ua> */ 252 UNUSUAL_DEV( 0x0421, 0x06aa, 0x1110, 0x1110, 253 "Nokia", 254 "502", 255 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 256 US_FL_MAX_SECTORS_64 ), 257 258 #ifdef NO_SDDR09 259 UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, 260 "Microtech", 261 "CameraMate", 262 USB_SC_SCSI, USB_PR_CB, NULL, 263 US_FL_SINGLE_LUN ), 264 #endif 265 266 /* 267 * Patch submitted by Daniel Drake <dsd@gentoo.org> 268 * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 269 */ 270 UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, 271 "Neuros Audio", 272 "USB 2.0 HD 2.5", 273 USB_SC_DEVICE, USB_PR_BULK, NULL, 274 US_FL_NEED_OVERRIDE ), 275 276 /* 277 * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559. 278 * The key does not actually break, but it returns zero sense which 279 * makes our SCSI stack to print confusing messages. 280 */ 281 UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, 282 "USBest Technology", /* sold by Transcend */ 283 "USB Mass Storage Device", 284 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), 285 286 /* 287 * Bohdan Linda <bohdan.linda@gmail.com> 288 * 1GB USB sticks MyFlash High Speed. I have restricted 289 * the revision to my model only 290 */ 291 UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, 292 "USB 2.0", 293 "Flash Disk", 294 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 295 US_FL_NOT_LOCKABLE ), 296 297 /* 298 * Reported by Tamas Kerecsen <kerecsen@bigfoot.com> 299 * Obviously the PROM has not been customized by the VAR; 300 * the Vendor and Product string descriptors are: 301 * Generic Mass Storage (PROTOTYPE--Remember to change idVendor) 302 * Generic Manufacturer (PROTOTYPE--Remember to change idVendor) 303 */ 304 UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000, 305 "Mitac", 306 "GPS", 307 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 308 US_FL_MAX_SECTORS_64 ), 309 310 /* 311 * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) 312 * Reported by Pete Zaitcev <zaitcev@redhat.com> 313 * This device chokes on both version of MODE SENSE which we have, so 314 * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT. 315 */ 316 UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100, 317 "AMI", 318 "Virtual Floppy", 319 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 320 US_FL_NO_WP_DETECT), 321 322 /* Reported by Egbert Eich <eich@suse.com> */ 323 UNUSUAL_DEV( 0x0480, 0xd010, 0x0100, 0x9999, 324 "Toshiba", 325 "External USB 3.0", 326 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 327 US_FL_ALWAYS_SYNC), 328 329 /* Patch submitted by Philipp Friedrich <philipp@void.at> */ 330 UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, 331 "Kyocera", 332 "Finecam S3x", 333 USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY), 334 335 /* Patch submitted by Philipp Friedrich <philipp@void.at> */ 336 UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100, 337 "Kyocera", 338 "Finecam S4", 339 USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY), 340 341 /* Patch submitted by Stephane Galles <stephane.galles@free.fr> */ 342 UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, 343 "Kyocera", 344 "Finecam S5", 345 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), 346 347 /* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */ 348 UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100, 349 "Kyocera", 350 "CONTAX SL300R T*", 351 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 352 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE), 353 354 /* 355 * Reported by Paul Stewart <stewart@wetlogic.net> 356 * This entry is needed because the device reports Sub=ff 357 */ 358 UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, 359 "Hitachi", 360 "DVD-CAM DZ-MV100A Camcorder", 361 USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN), 362 363 /* 364 * BENQ DC5330 365 * Reported by Manuel Fombuena <mfombuena@ya.com> and 366 * Frank Copeland <fjc@thingy.apana.org.au> 367 */ 368 UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, 369 "Tekom Technologies, Inc", 370 "300_CAMERA", 371 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 372 US_FL_IGNORE_RESIDUE ), 373 374 /* 375 * Patch for Nikon coolpix 2000 376 * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr> 377 */ 378 UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010, 379 "NIKON", 380 "NIKON DSC E2000", 381 USB_SC_DEVICE, USB_PR_DEVICE,NULL, 382 US_FL_NOT_LOCKABLE ), 383 384 /* Reported by Doug Maxey (dwm@austin.ibm.com) */ 385 UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, 386 "IBM", 387 "IBM RSA2", 388 USB_SC_DEVICE, USB_PR_CB, NULL, 389 US_FL_MAX_SECTORS_MIN), 390 391 /* 392 * Reported by Simon Levitt <simon@whattf.com> 393 * This entry needs Sub and Proto fields 394 */ 395 UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, 396 "Epson", 397 "875DC Storage", 398 USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY), 399 400 /* 401 * Reported by Khalid Aziz <khalid@gonehiking.org> 402 * This entry is needed because the device reports Sub=ff 403 */ 404 UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, 405 "Epson", 406 "785EPX Storage", 407 USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN), 408 409 /* 410 * Not sure who reported this originally but 411 * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN 412 * flag be added */ 413 UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, 414 "Fujifilm", 415 "FinePix 1400Zoom", 416 USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), 417 418 /* 419 * Reported by Ondrej Zary <linux@rainbow-software.org> 420 * The device reports one sector more and breaks when that sector is accessed 421 */ 422 UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c, 423 "ScanLogic", 424 "SL11R-IDE", 425 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 426 US_FL_FIX_CAPACITY), 427 428 /* 429 * Reported by Kriston Fincher <kriston@airmail.net> 430 * Patch submitted by Sean Millichamp <sean@bruenor.org> 431 * This is to support the Panasonic PalmCam PV-SD4090 432 * This entry is needed because the device reports Sub=ff 433 */ 434 UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200, 435 "Panasonic", 436 "LS-120 Camera", 437 USB_SC_UFI, USB_PR_DEVICE, NULL, 0), 438 439 /* 440 * From Yukihiro Nakai, via zaitcev@yahoo.com. 441 * This is needed for CB instead of CBI 442 */ 443 UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000, 444 "Sharp CE-CW05", 445 "CD-R/RW Drive", 446 USB_SC_8070, USB_PR_CB, NULL, 0), 447 448 /* Reported by Adriaan Penning <a.penning@luon.net> */ 449 UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999, 450 "Panasonic", 451 "DMC-LCx Camera", 452 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 453 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), 454 455 /* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */ 456 UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999, 457 "LEICA", 458 "D-LUX Camera", 459 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 460 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), 461 462 /* 463 * Most of the following entries were developed with the help of 464 * Shuttle/SCM directly. 465 */ 466 UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, 467 "Matshita", 468 "LS-120", 469 USB_SC_8020, USB_PR_CB, NULL, 0), 470 471 UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, 472 "Shuttle", 473 "eUSCSI Bridge", 474 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 475 US_FL_SCM_MULT_TARG ), 476 477 #ifdef NO_SDDR09 478 UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, 479 "SCM Microsystems", 480 "eUSB CompactFlash Adapter", 481 USB_SC_SCSI, USB_PR_CB, NULL, 482 US_FL_SINGLE_LUN), 483 #endif 484 485 /* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */ 486 UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100, 487 "SCM Microsystems Inc.", 488 "eUSB MMC Adapter", 489 USB_SC_SCSI, USB_PR_CB, NULL, 490 US_FL_SINGLE_LUN), 491 492 /* Reported by Daniel Nouri <dpunktnpunkt@web.de> */ 493 UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205, 494 "Shuttle", 495 "eUSB MMC Adapter", 496 USB_SC_SCSI, USB_PR_DEVICE, NULL, 497 US_FL_SINGLE_LUN), 498 499 UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200, 500 "Sony", 501 "Hifd", 502 USB_SC_SCSI, USB_PR_CB, NULL, 503 US_FL_SINGLE_LUN), 504 505 UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200, 506 "Shuttle", 507 "eUSB ATA/ATAPI Adapter", 508 USB_SC_8020, USB_PR_CB, NULL, 0), 509 510 UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200, 511 "Shuttle", 512 "eUSB CompactFlash Adapter", 513 USB_SC_8020, USB_PR_CB, NULL, 0), 514 515 UNUSUAL_DEV( 0x04e6, 0x000b, 0x0100, 0x0100, 516 "Shuttle", 517 "eUSCSI Bridge", 518 USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, 519 US_FL_SCM_MULT_TARG ), 520 521 UNUSUAL_DEV( 0x04e6, 0x000c, 0x0100, 0x0100, 522 "Shuttle", 523 "eUSCSI Bridge", 524 USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, 525 US_FL_SCM_MULT_TARG ), 526 527 UNUSUAL_DEV( 0x04e6, 0x000f, 0x0000, 0x9999, 528 "SCM Microsystems", 529 "eUSB SCSI Adapter (Bus Powered)", 530 USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, 531 US_FL_SCM_MULT_TARG ), 532 533 UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, 534 "Shuttle", 535 "CD-RW Device", 536 USB_SC_8020, USB_PR_CB, NULL, 0), 537 538 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */ 539 UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, 540 "Samsung", 541 "YP-U3", 542 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 543 US_FL_MAX_SECTORS_64), 544 545 /* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */ 546 UNUSUAL_DEV( 0x04e8, 0x5122, 0x0000, 0x9999, 547 "Samsung", 548 "YP-CP3", 549 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 550 US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG), 551 552 /* Added by Dmitry Artamonow <mad_soft@inbox.ru> */ 553 UNUSUAL_DEV( 0x04e8, 0x5136, 0x0000, 0x9999, 554 "Samsung", 555 "YP-Z3", 556 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 557 US_FL_MAX_SECTORS_64), 558 559 /* 560 * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. 561 * Device uses standards-violating 32-byte Bulk Command Block Wrappers and 562 * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. 563 */ 564 UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, 565 "Kobian Mercury", 566 "Binocam DCB-132", 567 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 568 US_FL_BULK32), 569 570 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */ 571 UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, 572 "Belkin", 573 "USB SCSI Adaptor", 574 USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init, 575 US_FL_SCM_MULT_TARG ), 576 577 /* 578 * Iomega Clik! Drive 579 * Reported by David Chatenay <dchatenay@hotmail.com> 580 * The reason this is needed is not fully known. 581 */ 582 UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, 583 "Iomega", 584 "USB Clik! 40", 585 USB_SC_8070, USB_PR_DEVICE, NULL, 586 US_FL_FIX_INQUIRY ), 587 588 /* Added by Alan Stern <stern@rowland.harvard.edu> */ 589 COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999, 590 "Linux", 591 "File-backed Storage Gadget", 592 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 593 US_FL_CAPACITY_OK ), 594 595 /* 596 * Yakumo Mega Image 37 597 * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */ 598 UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100, 599 "Tekom Technologies, Inc", 600 "300_CAMERA", 601 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 602 US_FL_IGNORE_RESIDUE ), 603 604 /* 605 * Another Yakumo camera. 606 * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> 607 */ 608 UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100, 609 "Tekom Technologies, Inc", 610 "300_CAMERA", 611 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 612 US_FL_IGNORE_RESIDUE ), 613 614 /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */ 615 UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100, 616 "Tekom Technologies, Inc", 617 "300_CAMERA", 618 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 619 US_FL_IGNORE_RESIDUE ), 620 621 /* 622 * Yakumo Mega Image 47 623 * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> 624 */ 625 UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100, 626 "Tekom Technologies, Inc", 627 "400_CAMERA", 628 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 629 US_FL_IGNORE_RESIDUE ), 630 631 /* 632 * Reported by Paul Ortyl <ortylp@3miasto.net> 633 * Note that it's similar to the device above, only different prodID 634 */ 635 UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100, 636 "Tekom Technologies, Inc", 637 "400_CAMERA", 638 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 639 US_FL_IGNORE_RESIDUE ), 640 641 UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, 642 "Sony", 643 "DSC-S30/S70/S75/505V/F505/F707/F717/P8", 644 USB_SC_SCSI, USB_PR_DEVICE, NULL, 645 US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ), 646 647 /* 648 * Submitted by Lars Jacob <jacob.lars@googlemail.com> 649 * This entry is needed because the device reports Sub=ff 650 */ 651 UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, 652 "Sony", 653 "DSC-T1/T5/H5", 654 USB_SC_8070, USB_PR_DEVICE, NULL, 655 US_FL_SINGLE_LUN ), 656 657 658 /* Reported by wim@geeks.nl */ 659 UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, 660 "Sony", 661 "Memorystick NW-MS7", 662 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 663 US_FL_SINGLE_LUN ), 664 665 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */ 666 UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000, 667 "Sony", 668 "USB Floppy Drive", 669 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 670 US_FL_SINGLE_LUN ), 671 672 UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, 673 "Sony", 674 "Memorystick MSAC-US1", 675 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 676 US_FL_SINGLE_LUN ), 677 678 /* Submitted by Klaus Mueller <k.mueller@intershop.de> */ 679 UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, 680 "Sony", 681 "Handycam", 682 USB_SC_SCSI, USB_PR_DEVICE, NULL, 683 US_FL_SINGLE_LUN ), 684 685 /* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */ 686 UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500, 687 "Sony", 688 "Handycam HC-85", 689 USB_SC_UFI, USB_PR_DEVICE, NULL, 690 US_FL_SINGLE_LUN ), 691 692 UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999, 693 "Sony", 694 "Memorystick MSC-U01N", 695 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 696 US_FL_SINGLE_LUN ), 697 698 /* Submitted by Michal Mlotek <mlotek@foobar.pl> */ 699 UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999, 700 "Sony", 701 "PEG N760c Memorystick", 702 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 703 US_FL_FIX_INQUIRY ), 704 705 UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999, 706 "Sony", 707 "Memorystick MSC-U03", 708 USB_SC_UFI, USB_PR_CB, NULL, 709 US_FL_SINGLE_LUN ), 710 711 /* Submitted by Nathan Babb <nathan@lexi.com> */ 712 UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999, 713 "Sony", 714 "PEG Mass Storage", 715 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 716 US_FL_FIX_INQUIRY ), 717 718 /* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */ 719 UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999, 720 "Sony", 721 "PEG Mass Storage", 722 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 723 US_FL_FIX_INQUIRY ), 724 725 /* Submitted by Mike Alborn <malborn@deandra.homeip.net> */ 726 UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999, 727 "Sony", 728 "PEG Mass Storage", 729 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 730 US_FL_FIX_INQUIRY ), 731 732 /* Submitted by Ren Bigcren <bigcren.ren@sonymobile.com> */ 733 UNUSUAL_DEV( 0x054c, 0x02a5, 0x0100, 0x0100, 734 "Sony Corp.", 735 "MicroVault Flash Drive", 736 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 737 US_FL_NO_READ_CAPACITY_16 ), 738 739 /* floppy reports multiple luns */ 740 UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, 741 "SAMSUNG", 742 "SFD-321U [FW 0C]", 743 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 744 US_FL_SINGLE_LUN ), 745 746 /* We keep this entry to force the transport; firmware 3.00 and later is ok. */ 747 UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, 748 "Y-E Data", 749 "Flashbuster-U", 750 USB_SC_DEVICE, USB_PR_CB, NULL, 751 US_FL_SINGLE_LUN), 752 753 /* 754 * Reported by Johann Cardon <johann.cardon@free.fr> 755 * This entry is needed only because the device reports 756 * bInterfaceClass = 0xff (vendor-specific) 757 */ 758 UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, 759 "Y-E Data", 760 "Silicon Media R/W", 761 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), 762 763 /* Reported by RTE <raszilki@yandex.ru> */ 764 UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141, 765 "JetFlash", 766 "TS1GJF2A/120", 767 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 768 US_FL_MAX_SECTORS_64 ), 769 770 /* Fabrizio Fellini <fello@libero.it> */ 771 UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, 772 "Fujifilm", 773 "Digital Camera EX-20 DSC", 774 USB_SC_8070, USB_PR_DEVICE, NULL, 0 ), 775 776 /* 777 * Reported by Andre Welter <a.r.welter@gmx.de> 778 * This antique device predates the release of the Bulk-only Transport 779 * spec, and if it gets a Get-Max-LUN then it requires the host to do a 780 * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent 781 * us from sending the request. 782 */ 783 UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100, 784 "Iomega", 785 "ZIP 100", 786 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 787 US_FL_SINGLE_LUN ), 788 789 UNUSUAL_DEV( 0x059b, 0x0040, 0x0100, 0x0100, 790 "Iomega", 791 "Jaz USB Adapter", 792 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 793 US_FL_SINGLE_LUN ), 794 795 /* Reported by <Hendryk.Pfeiffer@gmx.de> */ 796 UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000, 797 "LaCie", 798 "DVD+-RW", 799 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 800 US_FL_GO_SLOW ), 801 802 /* Reported by Christian Schaller <cschalle@redhat.com> */ 803 UNUSUAL_DEV( 0x059f, 0x0651, 0x0000, 0x0000, 804 "LaCie", 805 "External HDD", 806 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 807 US_FL_NO_WP_DETECT ), 808 809 /* 810 * Submitted by Joel Bourquard <numlock@freesurf.ch> 811 * Some versions of this device need the SubClass and Protocol overrides 812 * while others don't. 813 */ 814 UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, 815 "In-System", 816 "PyroGate External CD-ROM Enclosure (FCD-523)", 817 USB_SC_SCSI, USB_PR_BULK, NULL, 818 US_FL_NEED_OVERRIDE ), 819 820 /* 821 * Submitted by Sven Anderson <sven-linux@anderson.de> 822 * There are at least four ProductIDs used for iPods, so I added 0x1202 and 823 * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears 824 * to change with firmware updates, I changed the range to maximum for all 825 * iPod entries. 826 */ 827 UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999, 828 "Apple", 829 "iPod", 830 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 831 US_FL_FIX_CAPACITY ), 832 833 /* Reported by Avi Kivity <avi@argo.co.il> */ 834 UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999, 835 "Apple", 836 "iPod", 837 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 838 US_FL_FIX_CAPACITY ), 839 840 UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999, 841 "Apple", 842 "iPod", 843 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 844 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), 845 846 UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999, 847 "Apple", 848 "iPod", 849 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 850 US_FL_FIX_CAPACITY ), 851 852 /* 853 * Reported by Tyson Vinson <lornoss@gmail.com> 854 * This particular productId is the iPod Nano 855 */ 856 UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999, 857 "Apple", 858 "iPod", 859 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 860 US_FL_FIX_CAPACITY ), 861 862 /* 863 * Reported by Dan Williams <dcbw@redhat.com> 864 * Option N.V. mobile broadband modems 865 * Ignore driver CD mode and force into modem mode by default. 866 */ 867 868 /* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */ 869 UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999, 870 "Option N.V.", 871 "Mass Storage", 872 USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, 873 0), 874 875 /* Reported by Blake Matheny <bmatheny@purdue.edu> */ 876 UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, 877 "Lexar", 878 "USB CF Reader", 879 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 880 US_FL_FIX_INQUIRY ), 881 882 /* 883 * The following two entries are for a Genesys USB to IDE 884 * converter chip, but it changes its ProductId depending 885 * on whether or not a disk or an optical device is enclosed 886 * They were originally reported by Alexander Oltu 887 * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com> 888 * respectively. 889 * 890 * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz 891 * <phil@ipom.com> as these flags were made and hard-coded 892 * special-cases were pulled from scsiglue.c. 893 */ 894 UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, 895 "Genesys Logic", 896 "USB to IDE Optical", 897 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 898 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), 899 900 UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, 901 "Genesys Logic", 902 "USB to IDE Disk", 903 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 904 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), 905 906 /* Reported by Ben Efros <ben@pc-doctor.com> */ 907 UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451, 908 "Genesys Logic", 909 "USB to SATA", 910 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 911 US_FL_SANE_SENSE ), 912 913 /* 914 * Reported by Hanno Boeck <hanno@gmx.de> 915 * Taken from the Lycoris Kernel 916 */ 917 UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999, 918 "Vivitar", 919 "Vivicam 35Xx", 920 USB_SC_SCSI, USB_PR_BULK, NULL, 921 US_FL_FIX_INQUIRY ), 922 923 UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, 924 "TEAC", 925 "Floppy Drive", 926 USB_SC_UFI, USB_PR_CB, NULL, 0 ), 927 928 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */ 929 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, 930 "SigmaTel", 931 "USBMSC Audio Player", 932 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 933 US_FL_FIX_CAPACITY ), 934 935 /* Reported by Daniel Kukula <daniel.kuku@gmail.com> */ 936 UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100, 937 "Prolific Technology, Inc.", 938 "Prolific Storage Gadget", 939 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 940 US_FL_BAD_SENSE ), 941 942 /* Reported by Rogerio Brito <rbrito@ime.usp.br> */ 943 UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001, 944 "Prolific Technology, Inc.", 945 "Mass Storage Device", 946 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 947 US_FL_NOT_LOCKABLE ), 948 949 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */ 950 /* 951 * Change to bcdDeviceMin (0x0100 to 0x0001) reported by 952 * Thomas Bartosik <tbartdev@gmx-topmail.de> 953 */ 954 UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100, 955 "Prolific Technology Inc.", 956 "Mass Storage Device", 957 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 958 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), 959 960 /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */ 961 UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101, 962 "Prolific Technology Inc.", 963 "ATAPI-6 Bridge Controller", 964 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 965 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), 966 967 /* Submitted by Benny Sjostrand <benny@hostmobility.com> */ 968 UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001, 969 "Minolta", 970 "Dimage F300", 971 USB_SC_SCSI, USB_PR_BULK, NULL, 0 ), 972 973 /* Reported by Miguel A. Fosas <amn3s1a@ono.com> */ 974 UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, 975 "Minolta", 976 "DIMAGE E223", 977 USB_SC_SCSI, USB_PR_DEVICE, NULL, 0 ), 978 979 UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, 980 "Hagiwara", 981 "Flashgate", 982 USB_SC_SCSI, USB_PR_BULK, NULL, 0 ), 983 984 /* Reported by David Hamilton <niftimusmaximus@lycos.com> */ 985 UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, 986 "Thomson Multimedia Inc.", 987 "RCA RD1080 MP3 Player", 988 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 989 US_FL_FIX_CAPACITY ), 990 991 UNUSUAL_DEV( 0x06ca, 0x2003, 0x0100, 0x0100, 992 "Newer Technology", 993 "uSCSI", 994 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 995 US_FL_SCM_MULT_TARG ), 996 997 /* Reported by Adrian Pilchowiec <adi1981@epf.pl> */ 998 UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, 999 "RockChip", 1000 "MP3", 1001 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1002 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 | 1003 US_FL_NO_READ_CAPACITY_16), 1004 1005 /* 1006 * Reported by Jean-Baptiste Onofre <jb@nanthrax.net> 1007 * Support the following product : 1008 * "Dane-Elec MediaTouch" 1009 */ 1010 UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, 1011 "RockChip", 1012 "MTP", 1013 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1014 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), 1015 1016 /* 1017 * Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> 1018 * This USB MP3/AVI player device fails and disconnects if more than 128 1019 * sectors (64kB) are read/written in a single command, and may be present 1020 * at least in the following products: 1021 * "Magnex Digital Video Panel DVP 1800" 1022 * "MP4 AIGO 4GB SLOT SD" 1023 * "Teclast TL-C260 MP3" 1024 * "i.Meizu PMP MP3/MP4" 1025 * "Speed MV8 MP4 Audio Player" 1026 */ 1027 UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100, 1028 "RockChip", 1029 "ROCK MP3", 1030 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1031 US_FL_MAX_SECTORS_64), 1032 1033 /* Reported by Olivier Blondeau <zeitoun@gmail.com> */ 1034 UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100, 1035 "ATMEL", 1036 "SND1 Storage", 1037 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1038 US_FL_IGNORE_RESIDUE), 1039 1040 /* Submitted by Roman Hodek <roman@hodek.net> */ 1041 UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, 1042 "Sandisk", 1043 "ImageMate SDDR-05a", 1044 USB_SC_SCSI, USB_PR_CB, NULL, 1045 US_FL_SINGLE_LUN ), 1046 1047 UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009, 1048 "SanDisk Corporation", 1049 "ImageMate CompactFlash USB", 1050 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1051 US_FL_FIX_CAPACITY ), 1052 1053 UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, 1054 "Sandisk", 1055 "ImageMate SDDR-12", 1056 USB_SC_SCSI, USB_PR_CB, NULL, 1057 US_FL_SINGLE_LUN ), 1058 1059 /* Reported by Eero Volotinen <eero@ping-viini.org> */ 1060 UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, 1061 "Freecom Technologies", 1062 "FHD-Classic", 1063 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1064 US_FL_FIX_CAPACITY), 1065 1066 UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, 1067 "Microtech", 1068 "USB-SCSI-DB25", 1069 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 1070 US_FL_SCM_MULT_TARG ), 1071 1072 UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, 1073 "Microtech", 1074 "USB-SCSI-HD50", 1075 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 1076 US_FL_SCM_MULT_TARG ), 1077 1078 #ifdef NO_SDDR09 1079 UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, 1080 "Microtech", 1081 "CameraMate", 1082 USB_SC_SCSI, USB_PR_CB, NULL, 1083 US_FL_SINGLE_LUN ), 1084 #endif 1085 1086 /* 1087 * Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 1088 * Only revision 1.13 tested (same for all of the above devices, 1089 * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. 1090 * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>. 1091 * See also http://martin.wilck.bei.t-online.de/#kecf . 1092 */ 1093 UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, 1094 "Datafab", 1095 "KECF-USB", 1096 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1097 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), 1098 1099 /* 1100 * Reported by Rauch Wolke <rauchwolke@gmx.net> 1101 * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882) 1102 */ 1103 UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, 1104 "Simple Tech/Datafab", 1105 "CF+SM Reader", 1106 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1107 US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ), 1108 1109 /* 1110 * Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant 1111 * to the USB storage specification in two ways: 1112 * - They tell us they are using transport protocol CBI. In reality they 1113 * are using transport protocol CB. 1114 * - They don't like the INQUIRY command. So we must handle this command 1115 * of the SCSI layer ourselves. 1116 * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have 1117 * bInterfaceProtocol=0x00 (USB_PR_CBI) while others have 0x01 (USB_PR_CB). 1118 * So don't remove the USB_PR_CB override! 1119 * - Cameras with bcdDevice=0x9009 require the USB_SC_8070 override. 1120 */ 1121 UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, 1122 "Casio", 1123 "QV DigitalCamera", 1124 USB_SC_8070, USB_PR_CB, NULL, 1125 US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ), 1126 1127 /* Submitted by Oleksandr Chumachenko <ledest@gmail.com> */ 1128 UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100, 1129 "Casio", 1130 "EX-N1 DigitalCamera", 1131 USB_SC_8070, USB_PR_DEVICE, NULL, 0), 1132 1133 /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/ 1134 UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, 1135 "Samsung", 1136 "Digimax 410", 1137 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1138 US_FL_FIX_INQUIRY), 1139 1140 /* Reported by Luciano Rocha <luciano@eurotux.com> */ 1141 UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, 1142 "Argosy", 1143 "Storage", 1144 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1145 US_FL_FIX_CAPACITY), 1146 1147 /* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */ 1148 UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, 1149 "Argosy", 1150 "Storage", 1151 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1152 US_FL_FIX_CAPACITY), 1153 1154 /* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */ 1155 UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, 1156 "Argosy", 1157 "Storage", 1158 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1159 US_FL_FIX_CAPACITY), 1160 1161 /* Supplied with some Castlewood ORB removable drives */ 1162 UNUSUAL_DEV( 0x084b, 0xa001, 0x0000, 0x9999, 1163 "Castlewood Systems", 1164 "USB to SCSI cable", 1165 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 1166 US_FL_SCM_MULT_TARG ), 1167 1168 /* 1169 * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. 1170 * Flag will support Bulk devices which use a standards-violating 32-byte 1171 * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with 1172 * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support. 1173 */ 1174 1175 UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, 1176 "Grandtech", 1177 "DC2MEGA", 1178 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1179 US_FL_BULK32), 1180 1181 /* 1182 * Reported by <ttkspam@free.fr> 1183 * The device reports a vendor-specific device class, requiring an 1184 * explicit vendor/product match. 1185 */ 1186 UNUSUAL_DEV( 0x0851, 0x1542, 0x0002, 0x0002, 1187 "MagicPixel", 1188 "FW_Omega2", 1189 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), 1190 1191 /* 1192 * Andrew Lunn <andrew@lunn.ch> 1193 * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL 1194 * on LUN 4. 1195 * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera" 1196 */ 1197 UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200, 1198 "PanDigital", 1199 "Photo Frame", 1200 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1201 US_FL_NOT_LOCKABLE), 1202 1203 UNUSUAL_DEV( 0x085a, 0x0026, 0x0100, 0x0133, 1204 "Xircom", 1205 "PortGear USB-SCSI (Mac USB Dock)", 1206 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 1207 US_FL_SCM_MULT_TARG ), 1208 1209 UNUSUAL_DEV( 0x085a, 0x0028, 0x0100, 0x0133, 1210 "Xircom", 1211 "PortGear USB to SCSI Converter", 1212 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 1213 US_FL_SCM_MULT_TARG ), 1214 1215 /* Submitted by Jan De Luyck <lkml@kcore.org> */ 1216 UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, 1217 "CITIZEN", 1218 "X1DE-USB", 1219 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1220 US_FL_SINGLE_LUN), 1221 1222 /* 1223 * Submitted by Dylan Taft <d13f00l@gmail.com> 1224 * US_FL_IGNORE_RESIDUE Needed 1225 */ 1226 UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100, 1227 "AIPTEK", 1228 "Aiptek USB Keychain MP3 Player", 1229 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1230 US_FL_IGNORE_RESIDUE), 1231 1232 /* 1233 * Entry needed for flags. Moreover, all devices with this ID use 1234 * bulk-only transport, but _some_ falsely report Control/Bulk instead. 1235 * One example is "Trumpion Digital Research MYMP3". 1236 * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de> 1237 */ 1238 UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, 1239 "Trumpion", 1240 "t33520 USB Flash Card Controller", 1241 USB_SC_DEVICE, USB_PR_BULK, NULL, 1242 US_FL_NEED_OVERRIDE ), 1243 1244 /* 1245 * Reported by Filippo Bardelli <filibard@libero.it> 1246 * The device reports a subclass of RBC, which is wrong. 1247 */ 1248 UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, 1249 "Trumpion Microelectronics, Inc.", 1250 "33520 USB Digital Voice Recorder", 1251 USB_SC_UFI, USB_PR_DEVICE, NULL, 1252 0), 1253 1254 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ 1255 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, 1256 "Trumpion", 1257 "MP3 player", 1258 USB_SC_RBC, USB_PR_BULK, NULL, 1259 0 ), 1260 1261 UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100, 1262 "Samsung", 1263 "Flash Drive FIT", 1264 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1265 US_FL_MAX_SECTORS_64), 1266 1267 /* aeb */ 1268 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, 1269 "Feiya", 1270 "5-in-1 Card Reader", 1271 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1272 US_FL_FIX_CAPACITY ), 1273 1274 /* 1275 * Reported by Icenowy Zheng <icenowy@aosc.io> 1276 * The SMI SM3350 USB-UFS bridge controller will enter a wrong state 1277 * that do not process read/write command if a long sense is requested, 1278 * so force to use 18-byte sense. 1279 */ 1280 UNUSUAL_DEV( 0x090c, 0x3350, 0x0000, 0xffff, 1281 "SMI", 1282 "SM3350 UFS-to-USB-Mass-Storage bridge", 1283 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1284 US_FL_BAD_SENSE ), 1285 1286 /* 1287 * Reported by Paul Hartman <paul.hartman+linux@gmail.com> 1288 * This card reader returns "Illegal Request, Logical Block Address 1289 * Out of Range" for the first READ(10) after a new card is inserted. 1290 */ 1291 UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100, 1292 "Feiya", 1293 "SD/SDHC Card Reader", 1294 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1295 US_FL_INITIAL_READ10 ), 1296 1297 /* 1298 * This Pentax still camera is not conformant 1299 * to the USB storage specification: - 1300 * - It does not like the INQUIRY command. So we must handle this command 1301 * of the SCSI layer ourselves. 1302 * Tested on Rev. 10.00 (0x1000) 1303 * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk> 1304 */ 1305 UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, 1306 "Pentax", 1307 "Optio 2/3/400", 1308 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1309 US_FL_FIX_INQUIRY ), 1310 1311 /* 1312 * These are virtual windows driver CDs, which the zd1211rw driver 1313 * automatically converts into WLAN devices. 1314 */ 1315 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, 1316 "ZyXEL", 1317 "G-220F USB-WLAN Install", 1318 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1319 US_FL_IGNORE_DEVICE ), 1320 1321 UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, 1322 "SiteCom", 1323 "WL-117 USB-WLAN Install", 1324 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1325 US_FL_IGNORE_DEVICE ), 1326 1327 /* 1328 * Reported by Dan Williams <dcbw@redhat.com> 1329 * Option N.V. mobile broadband modems 1330 * Ignore driver CD mode and force into modem mode by default. 1331 */ 1332 1333 /* iCON 225 */ 1334 UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999, 1335 "Option N.V.", 1336 "Mass Storage", 1337 USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, 1338 0), 1339 1340 /* 1341 * Reported by F. Aben <f.aben@option.com> 1342 * This device (wrongly) has a vendor-specific device descriptor. 1343 * The entry is needed so usb-storage can bind to it's mass-storage 1344 * interface as an interface driver 1345 */ 1346 UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, 1347 "Option", 1348 "GI 0401 SD-Card", 1349 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1350 0 ), 1351 1352 /* 1353 * Reported by Jan Dumon <j.dumon@option.com> 1354 * These devices (wrongly) have a vendor-specific device descriptor. 1355 * These entries are needed so usb-storage can bind to their mass-storage 1356 * interface as an interface driver 1357 */ 1358 UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, 1359 "Option", 1360 "GI 0431 SD-Card", 1361 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1362 0 ), 1363 1364 UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000, 1365 "Option", 1366 "GI 0451 SD-Card", 1367 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1368 0 ), 1369 1370 UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000, 1371 "Option", 1372 "GI 0451 SD-Card", 1373 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1374 0 ), 1375 1376 UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000, 1377 "Option", 1378 "GI 0452 SD-Card", 1379 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1380 0 ), 1381 1382 UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000, 1383 "Option", 1384 "GI 0461 SD-Card", 1385 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1386 0 ), 1387 1388 UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000, 1389 "Option", 1390 "GI 0461 SD-Card", 1391 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1392 0 ), 1393 1394 UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000, 1395 "Option", 1396 "GI 033x SD-Card", 1397 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1398 0 ), 1399 1400 UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000, 1401 "Option", 1402 "GI 033x SD-Card", 1403 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1404 0 ), 1405 1406 UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000, 1407 "Option", 1408 "GI 033x SD-Card", 1409 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1410 0 ), 1411 1412 UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000, 1413 "Option", 1414 "GI 070x SD-Card", 1415 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1416 0 ), 1417 1418 UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000, 1419 "Option", 1420 "GI 1505 SD-Card", 1421 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1422 0 ), 1423 1424 UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000, 1425 "Option", 1426 "GI 1509 SD-Card", 1427 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1428 0 ), 1429 1430 UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000, 1431 "Option", 1432 "GI 1515 SD-Card", 1433 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1434 0 ), 1435 1436 UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000, 1437 "Option", 1438 "GI 1215 SD-Card", 1439 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1440 0 ), 1441 1442 UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000, 1443 "Option", 1444 "GI 1505 SD-Card", 1445 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1446 0 ), 1447 1448 /* Reported by Namjae Jeon <namjae.jeon@samsung.com> */ 1449 UNUSUAL_DEV(0x0bc2, 0x2300, 0x0000, 0x9999, 1450 "Seagate", 1451 "Portable HDD", 1452 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE), 1453 1454 /* Reported by Ben Efros <ben@pc-doctor.com> */ 1455 UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, 1456 "Seagate", 1457 "FreeAgent Pro", 1458 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1459 US_FL_SANE_SENSE ), 1460 1461 /* Reported by Kris Lindgren <kris.lindgren@gmail.com> */ 1462 UNUSUAL_DEV( 0x0bc2, 0x3332, 0x0000, 0x9999, 1463 "Seagate", 1464 "External", 1465 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1466 US_FL_NO_WP_DETECT ), 1467 1468 UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999, 1469 "Maxtor", 1470 "USB to SATA", 1471 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1472 US_FL_SANE_SENSE), 1473 1474 /* 1475 * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688. 1476 * The device blatantly ignores LUN and returns 1 in GetMaxLUN. 1477 */ 1478 UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100, 1479 "Unknown", 1480 "Unknown", 1481 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1482 US_FL_SINGLE_LUN ), 1483 1484 /* Submitted by Joris Struyve <joris@struyve.be> */ 1485 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, 1486 "Medion", 1487 "MD 7425", 1488 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1489 US_FL_FIX_INQUIRY), 1490 1491 /* 1492 * Entry for Jenoptik JD 5200z3 1493 * 1494 * email: car.busse@gmx.de 1495 */ 1496 UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200, 1497 "Jenoptik", 1498 "JD 5200 z3", 1499 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), 1500 1501 /* Reported by Jason Johnston <killean@shaw.ca> */ 1502 UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000, 1503 "Macpower Technology Co.LTD.", 1504 "USB 2.0 3.5\" DEVICE", 1505 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1506 US_FL_FIX_CAPACITY), 1507 1508 /* 1509 * Reported by Lubomir Blaha <tritol@trilogic.cz> 1510 * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this 1511 * works for me. Can anybody correct these values? (I able to test corrected 1512 * version.) 1513 */ 1514 UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff, 1515 "Netac", 1516 "USB-CF-Card", 1517 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1518 US_FL_FIX_INQUIRY ), 1519 1520 /* 1521 * Reported by Edward Chapman (taken from linux-usb mailing list) 1522 * Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive 1523 */ 1524 UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999, 1525 "Netac", 1526 "USB Flash Disk", 1527 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1528 US_FL_IGNORE_RESIDUE ), 1529 1530 1531 /* 1532 * Patch by Stephan Walter <stephan.walter@epfl.ch> 1533 * I don't know why, but it works... 1534 */ 1535 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012, 1536 "WINWARD", 1537 "Music Disk", 1538 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1539 US_FL_IGNORE_RESIDUE ), 1540 1541 /* Reported by Ian McConnell <ian at emit.demon.co.uk> */ 1542 UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012, 1543 "PNP_MP3", 1544 "PNP_MP3 PLAYER", 1545 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1546 US_FL_IGNORE_RESIDUE ), 1547 1548 /* Reported by Jim McCloskey <mcclosk@ucsc.edu> */ 1549 UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100, 1550 "Cowon Systems", 1551 "iAUDIO M5", 1552 USB_SC_DEVICE, USB_PR_BULK, NULL, 1553 US_FL_NEED_OVERRIDE ), 1554 1555 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */ 1556 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, 1557 "USB", 1558 "Solid state disk", 1559 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1560 US_FL_FIX_INQUIRY ), 1561 1562 /* 1563 * Submitted by Daniel Drake <dsd@gentoo.org> 1564 * Reported by dayul on the Gentoo Forums 1565 */ 1566 UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110, 1567 "Ours Technology", 1568 "Flash Disk", 1569 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1570 US_FL_IGNORE_RESIDUE ), 1571 1572 /* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */ 1573 UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110, 1574 "USB", 1575 "Flash Disk", 1576 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1577 US_FL_IGNORE_RESIDUE ), 1578 1579 /* 1580 * Reported by Benjamin Schiller <sbenni@gmx.de> 1581 * It is also sold by Easylite as DJ 20 1582 */ 1583 UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, 1584 "Typhoon", 1585 "My DJ 1820", 1586 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1587 US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), 1588 1589 /* 1590 * Patch by Leonid Petrov mail at lpetrov.net 1591 * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org> 1592 * http://www.qbik.ch/usb/devices/showdev.php?id=1705 1593 * Updated to 103 device by MJ Ray mjr at phonecoop.coop 1594 */ 1595 UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100, 1596 "Oracom Co., Ltd", 1597 "ORC-200M", 1598 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1599 US_FL_IGNORE_RESIDUE ), 1600 1601 /* 1602 * David Kuehling <dvdkhlng@gmx.de>: 1603 * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI 1604 * errors when trying to write. 1605 */ 1606 UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, 1607 "C-MEX", 1608 "A-VOX", 1609 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1610 US_FL_IGNORE_RESIDUE ), 1611 1612 /* Submitted by Nick Holloway */ 1613 UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100, 1614 "VTech", 1615 "Kidizoom", 1616 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1617 US_FL_FIX_CAPACITY ), 1618 1619 /* Reported by Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> */ 1620 UNUSUAL_DEV( 0x0fca, 0x8004, 0x0201, 0x0201, 1621 "Research In Motion", 1622 "BlackBerry Bold 9000", 1623 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1624 US_FL_MAX_SECTORS_64 ), 1625 1626 /* Reported by Michael Stattmann <michael@stattmann.com> */ 1627 UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, 1628 "Sony Ericsson", 1629 "V800-Vodafone 802", 1630 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1631 US_FL_NO_WP_DETECT ), 1632 1633 /* Reported by The Solutor <thesolutor@gmail.com> */ 1634 UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, 1635 "Sony Ericsson", 1636 "MD400", 1637 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1638 US_FL_IGNORE_DEVICE), 1639 1640 /* 1641 * Reported by Jan Mate <mate@fiit.stuba.sk> 1642 * and by Soeren Sonnenburg <kernel@nn7.de> 1643 */ 1644 UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, 1645 "Sony Ericsson", 1646 "P990i", 1647 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1648 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), 1649 1650 /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */ 1651 UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, 1652 "Sony Ericsson", 1653 "M600i", 1654 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1655 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), 1656 1657 /* Reported by Ricardo Barberis <ricardo@dattatec.com> */ 1658 UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000, 1659 "Sony Ericsson", 1660 "P1i", 1661 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1662 US_FL_IGNORE_RESIDUE ), 1663 1664 /* 1665 * Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> 1666 * Tested on hardware version 1.10. 1667 * Entry is needed only for the initializer function override. 1668 * Devices with bcd > 110 seem to not need it while those 1669 * with bcd < 110 appear to need it. 1670 */ 1671 UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110, 1672 "Desknote", 1673 "UCR-61S2B", 1674 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_ucr61s2b_init, 1675 0 ), 1676 1677 UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999, 1678 "Western Digital", 1679 "External HDD", 1680 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1681 US_FL_SANE_SENSE), 1682 1683 /* Reported by Namjae Jeon <namjae.jeon@samsung.com> */ 1684 UNUSUAL_DEV(0x1058, 0x070a, 0x0000, 0x9999, 1685 "Western Digital", 1686 "My Passport HDD", 1687 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE), 1688 1689 /* 1690 * Reported by Fabio Venturi <f.venturi@tdnet.it> 1691 * The device reports a vendor-specific bDeviceClass. 1692 */ 1693 UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, 1694 "Actions Semiconductor", 1695 "Mtp device", 1696 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1697 0), 1698 1699 /* 1700 * Reported by Pascal Terjan <pterjan@mandriva.com> 1701 * Ignore driver CD mode and force into modem mode by default. 1702 */ 1703 UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, 1704 "D-Link", 1705 "USB Mass Storage", 1706 USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE), 1707 1708 /* 1709 * Reported by Kevin Lloyd <linux@sierrawireless.com> 1710 * Entry is needed for the initializer function override, 1711 * which instructs the device to load as a modem 1712 * device. 1713 */ 1714 UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, 1715 "Sierra Wireless", 1716 "USB MMC Storage", 1717 USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init, 1718 0), 1719 1720 /* 1721 * Reported by Jaco Kroon <jaco@kroon.co.za> 1722 * The usb-storage module found on the Digitech GNX4 (and supposedly other 1723 * devices) misbehaves and causes a bunch of invalid I/O errors. 1724 */ 1725 UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, 1726 "Digitech HMG", 1727 "DigiTech Mass Storage", 1728 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 1729 US_FL_IGNORE_RESIDUE ), 1730 1731 /* 1732 * Reported by fangxiaozhi <huananhu@huawei.com> 1733 * This brings the HUAWEI data card devices into multi-port mode 1734 */ 1735 UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, 1736 "HUAWEI MOBILE", 1737 "Mass Storage", 1738 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1739 0), 1740 UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, 1741 "HUAWEI MOBILE", 1742 "Mass Storage", 1743 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1744 0), 1745 UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, 1746 "HUAWEI MOBILE", 1747 "Mass Storage", 1748 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1749 0), 1750 UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, 1751 "HUAWEI MOBILE", 1752 "Mass Storage", 1753 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1754 0), 1755 UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000, 1756 "HUAWEI MOBILE", 1757 "Mass Storage", 1758 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1759 0), 1760 UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, 1761 "HUAWEI MOBILE", 1762 "Mass Storage", 1763 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1764 0), 1765 UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000, 1766 "HUAWEI MOBILE", 1767 "Mass Storage", 1768 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1769 0), 1770 UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, 1771 "HUAWEI MOBILE", 1772 "Mass Storage", 1773 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1774 0), 1775 UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, 1776 "HUAWEI MOBILE", 1777 "Mass Storage", 1778 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1779 0), 1780 UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000, 1781 "HUAWEI MOBILE", 1782 "Mass Storage", 1783 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1784 0), 1785 UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, 1786 "HUAWEI MOBILE", 1787 "Mass Storage", 1788 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1789 0), 1790 UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, 1791 "HUAWEI MOBILE", 1792 "Mass Storage", 1793 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1794 0), 1795 UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000, 1796 "HUAWEI MOBILE", 1797 "Mass Storage", 1798 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1799 0), 1800 UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000, 1801 "HUAWEI MOBILE", 1802 "Mass Storage", 1803 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1804 0), 1805 UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000, 1806 "HUAWEI MOBILE", 1807 "Mass Storage", 1808 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1809 0), 1810 UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000, 1811 "HUAWEI MOBILE", 1812 "Mass Storage", 1813 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1814 0), 1815 UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000, 1816 "HUAWEI MOBILE", 1817 "Mass Storage", 1818 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1819 0), 1820 UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000, 1821 "HUAWEI MOBILE", 1822 "Mass Storage", 1823 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1824 0), 1825 UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, 1826 "HUAWEI MOBILE", 1827 "Mass Storage", 1828 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1829 0), 1830 UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, 1831 "HUAWEI MOBILE", 1832 "Mass Storage", 1833 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1834 0), 1835 UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, 1836 "HUAWEI MOBILE", 1837 "Mass Storage", 1838 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1839 0), 1840 UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, 1841 "HUAWEI MOBILE", 1842 "Mass Storage", 1843 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1844 0), 1845 UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, 1846 "HUAWEI MOBILE", 1847 "Mass Storage", 1848 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1849 0), 1850 UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, 1851 "HUAWEI MOBILE", 1852 "Mass Storage", 1853 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1854 0), 1855 UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, 1856 "HUAWEI MOBILE", 1857 "Mass Storage", 1858 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1859 0), 1860 UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, 1861 "HUAWEI MOBILE", 1862 "Mass Storage", 1863 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1864 0), 1865 UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, 1866 "HUAWEI MOBILE", 1867 "Mass Storage", 1868 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1869 0), 1870 UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, 1871 "HUAWEI MOBILE", 1872 "Mass Storage", 1873 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1874 0), 1875 UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000, 1876 "HUAWEI MOBILE", 1877 "Mass Storage", 1878 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1879 0), 1880 UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000, 1881 "HUAWEI MOBILE", 1882 "Mass Storage", 1883 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1884 0), 1885 UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000, 1886 "HUAWEI MOBILE", 1887 "Mass Storage", 1888 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1889 0), 1890 UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000, 1891 "HUAWEI MOBILE", 1892 "Mass Storage", 1893 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1894 0), 1895 UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000, 1896 "HUAWEI MOBILE", 1897 "Mass Storage", 1898 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1899 0), 1900 UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000, 1901 "HUAWEI MOBILE", 1902 "Mass Storage", 1903 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1904 0), 1905 UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000, 1906 "HUAWEI MOBILE", 1907 "Mass Storage", 1908 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1909 0), 1910 UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000, 1911 "HUAWEI MOBILE", 1912 "Mass Storage", 1913 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1914 0), 1915 UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000, 1916 "HUAWEI MOBILE", 1917 "Mass Storage", 1918 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1919 0), 1920 UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000, 1921 "HUAWEI MOBILE", 1922 "Mass Storage", 1923 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1924 0), 1925 UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000, 1926 "HUAWEI MOBILE", 1927 "Mass Storage", 1928 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1929 0), 1930 UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000, 1931 "HUAWEI MOBILE", 1932 "Mass Storage", 1933 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1934 0), 1935 UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000, 1936 "HUAWEI MOBILE", 1937 "Mass Storage", 1938 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1939 0), 1940 UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000, 1941 "HUAWEI MOBILE", 1942 "Mass Storage", 1943 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1944 0), 1945 UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000, 1946 "HUAWEI MOBILE", 1947 "Mass Storage", 1948 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1949 0), 1950 UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000, 1951 "HUAWEI MOBILE", 1952 "Mass Storage", 1953 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1954 0), 1955 UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000, 1956 "HUAWEI MOBILE", 1957 "Mass Storage", 1958 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1959 0), 1960 UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000, 1961 "HUAWEI MOBILE", 1962 "Mass Storage", 1963 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1964 0), 1965 UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000, 1966 "HUAWEI MOBILE", 1967 "Mass Storage", 1968 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1969 0), 1970 UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000, 1971 "HUAWEI MOBILE", 1972 "Mass Storage", 1973 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1974 0), 1975 UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000, 1976 "HUAWEI MOBILE", 1977 "Mass Storage", 1978 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1979 0), 1980 UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000, 1981 "HUAWEI MOBILE", 1982 "Mass Storage", 1983 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1984 0), 1985 UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000, 1986 "HUAWEI MOBILE", 1987 "Mass Storage", 1988 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1989 0), 1990 UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000, 1991 "HUAWEI MOBILE", 1992 "Mass Storage", 1993 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1994 0), 1995 UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000, 1996 "HUAWEI MOBILE", 1997 "Mass Storage", 1998 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 1999 0), 2000 UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000, 2001 "HUAWEI MOBILE", 2002 "Mass Storage", 2003 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2004 0), 2005 UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000, 2006 "HUAWEI MOBILE", 2007 "Mass Storage", 2008 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2009 0), 2010 UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000, 2011 "HUAWEI MOBILE", 2012 "Mass Storage", 2013 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2014 0), 2015 UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000, 2016 "HUAWEI MOBILE", 2017 "Mass Storage", 2018 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2019 0), 2020 UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000, 2021 "HUAWEI MOBILE", 2022 "Mass Storage", 2023 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2024 0), 2025 UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000, 2026 "HUAWEI MOBILE", 2027 "Mass Storage", 2028 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2029 0), 2030 UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000, 2031 "HUAWEI MOBILE", 2032 "Mass Storage", 2033 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2034 0), 2035 UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000, 2036 "HUAWEI MOBILE", 2037 "Mass Storage", 2038 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2039 0), 2040 UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000, 2041 "HUAWEI MOBILE", 2042 "Mass Storage", 2043 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2044 0), 2045 UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000, 2046 "HUAWEI MOBILE", 2047 "Mass Storage", 2048 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2049 0), 2050 UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000, 2051 "HUAWEI MOBILE", 2052 "Mass Storage", 2053 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2054 0), 2055 UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000, 2056 "HUAWEI MOBILE", 2057 "Mass Storage", 2058 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2059 0), 2060 UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000, 2061 "HUAWEI MOBILE", 2062 "Mass Storage", 2063 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init, 2064 0), 2065 2066 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */ 2067 UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001, 2068 "Minolta", 2069 "Dimage Z10", 2070 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2071 0 ), 2072 2073 /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */ 2074 UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, 2075 "SWISSBIT", 2076 "Black Silver", 2077 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2078 US_FL_IGNORE_RESIDUE ), 2079 2080 /* 2081 * Reported by Tobias Jakobi <tjakobi@math.uni-bielefeld.de> 2082 * The INIC-3619 bridge is used in the StarTech SLSODDU33B 2083 * SATA-USB enclosure for slimline optical drives. 2084 * 2085 * The quirk enables MakeMKV to properly exchange keys with 2086 * an installed BD drive. 2087 */ 2088 UNUSUAL_DEV( 0x13fd, 0x3609, 0x0209, 0x0209, 2089 "Initio Corporation", 2090 "INIC-3619", 2091 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2092 US_FL_IGNORE_RESIDUE ), 2093 2094 /* Reported by Qinglin Ye <yestyle@gmail.com> */ 2095 UNUSUAL_DEV( 0x13fe, 0x3600, 0x0100, 0x0100, 2096 "Kingston", 2097 "DT 101 G2", 2098 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2099 US_FL_BULK_IGNORE_TAG ), 2100 2101 /* Reported by Francesco Foresti <frafore@tiscali.it> */ 2102 UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, 2103 "Super Top", 2104 "IDE DEVICE", 2105 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2106 US_FL_IGNORE_RESIDUE ), 2107 2108 /* Reported by Michael Büsch <m@bues.ch> */ 2109 UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0117, 2110 "JMicron", 2111 "USB to ATA/ATAPI Bridge", 2112 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2113 US_FL_BROKEN_FUA ), 2114 2115 /* Reported by David Kozub <zub@linux.fjfi.cvut.cz> */ 2116 UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, 2117 "JMicron", 2118 "JMS567", 2119 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2120 US_FL_BROKEN_FUA), 2121 2122 /* 2123 * Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br> 2124 * JMicron responds to USN and several other SCSI ioctls with a 2125 * residue that causes subsequent I/O requests to fail. */ 2126 UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, 2127 "JMicron", 2128 "USB to ATA/ATAPI Bridge", 2129 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2130 US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), 2131 2132 /* Reported by Dmitry Nezhevenko <dion@dion.org.ua> */ 2133 UNUSUAL_DEV( 0x152d, 0x2566, 0x0114, 0x0114, 2134 "JMicron", 2135 "USB to ATA/ATAPI Bridge", 2136 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2137 US_FL_BROKEN_FUA ), 2138 2139 /* Reported by Teijo Kinnunen <teijo.kinnunen@code-q.fi> */ 2140 UNUSUAL_DEV( 0x152d, 0x2567, 0x0117, 0x0117, 2141 "JMicron", 2142 "USB to ATA/ATAPI Bridge", 2143 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2144 US_FL_BROKEN_FUA ), 2145 2146 /* Reported-by George Cherian <george.cherian@cavium.com> */ 2147 UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999, 2148 "JMicron", 2149 "JMS56x", 2150 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2151 US_FL_NO_REPORT_OPCODES), 2152 2153 /* 2154 * Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI) 2155 * and Mac USB Dock USB-SCSI */ 2156 UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133, 2157 "Entrega Technologies", 2158 "USB to SCSI Converter", 2159 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 2160 US_FL_SCM_MULT_TARG ), 2161 2162 /* 2163 * Reported by Robert Schedel <r.schedel@yahoo.de> 2164 * Note: this is a 'super top' device like the above 14cd/6600 device 2165 */ 2166 UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, 2167 "Teac", 2168 "HD-35PUK-B", 2169 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2170 US_FL_IGNORE_RESIDUE ), 2171 2172 /* Reported by Oliver Neukum <oneukum@suse.com> */ 2173 UNUSUAL_DEV( 0x174c, 0x55aa, 0x0100, 0x0100, 2174 "ASMedia", 2175 "AS2105", 2176 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2177 US_FL_NEEDS_CAP16), 2178 2179 /* Reported by Jesse Feddema <jdfeddema@gmail.com> */ 2180 UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000, 2181 "Yarvik", 2182 "PMP400", 2183 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2184 US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), 2185 2186 UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999, 2187 "Ariston Technologies", 2188 "iConnect USB to SCSI adapter", 2189 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 2190 US_FL_SCM_MULT_TARG ), 2191 2192 /* 2193 * Reported by Hans de Goede <hdegoede@redhat.com> 2194 * These Appotech controllers are found in Picture Frames, they provide a 2195 * (buggy) emulation of a cdrom drive which contains the windows software 2196 * Uploading of pictures happens over the corresponding /dev/sg device. 2197 */ 2198 UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000, 2199 "BUILDWIN", 2200 "Photo Frame", 2201 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2202 US_FL_BAD_SENSE ), 2203 UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000, 2204 "BUILDWIN", 2205 "Photo Frame", 2206 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2207 US_FL_BAD_SENSE ), 2208 UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, 2209 "BUILDWIN", 2210 "Photo Frame", 2211 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2212 US_FL_NO_READ_DISC_INFO ), 2213 2214 /* 2215 * Reported by Oliver Neukum <oneukum@suse.com> 2216 * This device morphes spontaneously into another device if the access 2217 * pattern of Windows isn't followed. Thus writable media would be dirty 2218 * if the initial instance is used. So the device is limited to its 2219 * virtual CD. 2220 * And yes, the concept that BCD goes up to 9 is not heeded 2221 */ 2222 UNUSUAL_DEV( 0x19d2, 0x1225, 0x0000, 0xffff, 2223 "ZTE,Incorporated", 2224 "ZTE WCDMA Technologies MSM", 2225 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2226 US_FL_SINGLE_LUN ), 2227 2228 /* 2229 * Reported by Sven Geggus <sven-usbst@geggus.net> 2230 * This encrypted pen drive returns bogus data for the initial READ(10). 2231 */ 2232 UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200, 2233 "Corsair", 2234 "Padlock v2", 2235 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2236 US_FL_INITIAL_READ10 ), 2237 2238 /* 2239 * Reported by Hans de Goede <hdegoede@redhat.com> 2240 * These are mini projectors using USB for both power and video data transport 2241 * The usb-storage interface is a virtual windows driver CD, which the gm12u320 2242 * driver automatically converts into framebuffer & kms dri device nodes. 2243 */ 2244 UNUSUAL_DEV( 0x1de1, 0xc102, 0x0000, 0xffff, 2245 "Grain-media Technology Corp.", 2246 "USB3.0 Device GM12U320", 2247 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2248 US_FL_IGNORE_DEVICE ), 2249 2250 /* 2251 * Patch by Richard Schütz <r.schtz@t-online.de> 2252 * This external hard drive enclosure uses a JMicron chip which 2253 * needs the US_FL_IGNORE_RESIDUE flag to work properly. 2254 */ 2255 UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000, 2256 "TrekStor GmbH & Co. KG", 2257 "DataStation maxi g.u", 2258 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2259 US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), 2260 2261 /* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */ 2262 UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000, 2263 "Coby Electronics", 2264 "MP3 Player", 2265 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2266 US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), 2267 2268 /* Supplied with some Castlewood ORB removable drives */ 2269 UNUSUAL_DEV( 0x2027, 0xa001, 0x0000, 0x9999, 2270 "Double-H Technology", 2271 "USB to SCSI Intelligent Cable", 2272 USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, 2273 US_FL_SCM_MULT_TARG ), 2274 2275 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, 2276 "ST", 2277 "2A", 2278 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2279 US_FL_FIX_CAPACITY), 2280 2281 /* 2282 * patch submitted by Davide Perini <perini.davide@dpsoftware.org> 2283 * and Renato Perini <rperini@email.it> 2284 */ 2285 UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, 2286 "Motorola", 2287 "RAZR V3x", 2288 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2289 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), 2290 2291 /* 2292 * Patch by Constantin Baranov <const@tltsu.ru> 2293 * Report by Andreas Koenecke. 2294 * Motorola ROKR Z6. 2295 */ 2296 UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101, 2297 "Motorola", 2298 "MSnc.", 2299 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2300 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG), 2301 2302 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */ 2303 UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, 2304 "MPIO", 2305 "HS200", 2306 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2307 US_FL_GO_SLOW ), 2308 2309 /* Reported-by: Tim Anderson <tsa@biglakesoftware.com> */ 2310 UNUSUAL_DEV( 0x2ca3, 0x0031, 0x0000, 0x9999, 2311 "DJI", 2312 "CineSSD", 2313 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2314 US_FL_NO_ATA_1X), 2315 2316 /* 2317 * Reported by Frederic Marchal <frederic.marchal@wowcompany.com> 2318 * Mio Moov 330 2319 */ 2320 UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000, 2321 "Mitac", 2322 "Mio DigiWalker USB Sync", 2323 USB_SC_DEVICE,USB_PR_DEVICE,NULL, 2324 US_FL_MAX_SECTORS_64 ), 2325 2326 /* Reported by Cyril Roelandt <tipecaml@gmail.com> */ 2327 UNUSUAL_DEV( 0x357d, 0x7788, 0x0114, 0x0114, 2328 "JMicron", 2329 "USB to ATA/ATAPI Bridge", 2330 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2331 US_FL_BROKEN_FUA ), 2332 2333 /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */ 2334 UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100, 2335 "iRiver", 2336 "MP3 T10", 2337 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2338 US_FL_IGNORE_RESIDUE ), 2339 2340 /* Reported by Sergey Pinaev <dfo@antex.ru> */ 2341 UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000, 2342 "iRiver", 2343 "P7K", 2344 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2345 US_FL_MAX_SECTORS_64 ), 2346 2347 /* 2348 * David Härdeman <david@2gen.com> 2349 * The key makes the SCSI stack print confusing (but harmless) messages 2350 */ 2351 UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, 2352 "Iomega", 2353 "Micro Mini 1GB", 2354 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), 2355 2356 /* "G-DRIVE" external HDD hangs on write without these. 2357 * Patch submitted by Alexander Kappner <agk@godking.net> 2358 */ 2359 UNUSUAL_DEV(0x4971, 0x8024, 0x0000, 0x9999, 2360 "SimpleTech", 2361 "External HDD", 2362 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2363 US_FL_ALWAYS_SYNC), 2364 2365 /* 2366 * Nick Bowler <nbowler@elliptictech.com> 2367 * SCSI stack spams (otherwise harmless) error messages. 2368 */ 2369 UNUSUAL_DEV( 0xc251, 0x4003, 0x0100, 0x0100, 2370 "Keil Software, Inc.", 2371 "V2M MotherBoard", 2372 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2373 US_FL_NOT_LOCKABLE), 2374 2375 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */ 2376 UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, 2377 "DataStor", 2378 "USB4500 FW1.04", 2379 USB_SC_DEVICE, USB_PR_DEVICE, NULL, 2380 US_FL_CAPACITY_HEURISTICS), 2381 2382 /* Reported by Alessio Treglia <quadrispro@ubuntu.com> */ 2383 UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, 2384 "TGE", 2385 "Digital MP3 Audio Player", 2386 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), 2387 2388 /* Unusual uas devices */ 2389 #if IS_ENABLED(CONFIG_USB_UAS) 2390 #include "unusual_uas.h" 2391 #endif 2392 2393 /* Control/Bulk transport for all SubClass values */ 2394 USUAL_DEV(USB_SC_RBC, USB_PR_CB), 2395 USUAL_DEV(USB_SC_8020, USB_PR_CB), 2396 USUAL_DEV(USB_SC_QIC, USB_PR_CB), 2397 USUAL_DEV(USB_SC_UFI, USB_PR_CB), 2398 USUAL_DEV(USB_SC_8070, USB_PR_CB), 2399 USUAL_DEV(USB_SC_SCSI, USB_PR_CB), 2400 2401 /* Control/Bulk/Interrupt transport for all SubClass values */ 2402 USUAL_DEV(USB_SC_RBC, USB_PR_CBI), 2403 USUAL_DEV(USB_SC_8020, USB_PR_CBI), 2404 USUAL_DEV(USB_SC_QIC, USB_PR_CBI), 2405 USUAL_DEV(USB_SC_UFI, USB_PR_CBI), 2406 USUAL_DEV(USB_SC_8070, USB_PR_CBI), 2407 USUAL_DEV(USB_SC_SCSI, USB_PR_CBI), 2408 2409 /* Bulk-only transport for all SubClass values */ 2410 USUAL_DEV(USB_SC_RBC, USB_PR_BULK), 2411 USUAL_DEV(USB_SC_8020, USB_PR_BULK), 2412 USUAL_DEV(USB_SC_QIC, USB_PR_BULK), 2413 USUAL_DEV(USB_SC_UFI, USB_PR_BULK), 2414 USUAL_DEV(USB_SC_8070, USB_PR_BULK), 2415 USUAL_DEV(USB_SC_SCSI, USB_PR_BULK), 2416