1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * USB Attached SCSI 4 * Note that this is not the same as the USB Mass Storage driver 5 * 6 * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016 7 * Copyright Matthew Wilcox for Intel Corp, 2010 8 * Copyright Sarah Sharp for Intel Corp, 2010 9 */ 10 11 #include <linux/blkdev.h> 12 #include <linux/slab.h> 13 #include <linux/types.h> 14 #include <linux/module.h> 15 #include <linux/usb.h> 16 #include <linux/usb_usual.h> 17 #include <linux/usb/hcd.h> 18 #include <linux/usb/storage.h> 19 #include <linux/usb/uas.h> 20 21 #include <scsi/scsi.h> 22 #include <scsi/scsi_eh.h> 23 #include <scsi/scsi_dbg.h> 24 #include <scsi/scsi_cmnd.h> 25 #include <scsi/scsi_device.h> 26 #include <scsi/scsi_host.h> 27 #include <scsi/scsi_tcq.h> 28 29 #include "uas-detect.h" 30 #include "scsiglue.h" 31 32 #define MAX_CMNDS 256 33 34 struct uas_dev_info { 35 struct usb_interface *intf; 36 struct usb_device *udev; 37 struct usb_anchor cmd_urbs; 38 struct usb_anchor sense_urbs; 39 struct usb_anchor data_urbs; 40 unsigned long flags; 41 int qdepth, resetting; 42 unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; 43 unsigned use_streams:1; 44 unsigned shutdown:1; 45 struct scsi_cmnd *cmnd[MAX_CMNDS]; 46 spinlock_t lock; 47 struct work_struct work; 48 }; 49 50 enum { 51 SUBMIT_STATUS_URB = BIT(1), 52 ALLOC_DATA_IN_URB = BIT(2), 53 SUBMIT_DATA_IN_URB = BIT(3), 54 ALLOC_DATA_OUT_URB = BIT(4), 55 SUBMIT_DATA_OUT_URB = BIT(5), 56 ALLOC_CMD_URB = BIT(6), 57 SUBMIT_CMD_URB = BIT(7), 58 COMMAND_INFLIGHT = BIT(8), 59 DATA_IN_URB_INFLIGHT = BIT(9), 60 DATA_OUT_URB_INFLIGHT = BIT(10), 61 COMMAND_ABORTED = BIT(11), 62 IS_IN_WORK_LIST = BIT(12), 63 }; 64 65 /* Overrides scsi_pointer */ 66 struct uas_cmd_info { 67 unsigned int state; 68 unsigned int uas_tag; 69 struct urb *cmd_urb; 70 struct urb *data_in_urb; 71 struct urb *data_out_urb; 72 }; 73 74 /* I hate forward declarations, but I actually have a loop */ 75 static int uas_submit_urbs(struct scsi_cmnd *cmnd, 76 struct uas_dev_info *devinfo); 77 static void uas_do_work(struct work_struct *work); 78 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller); 79 static void uas_free_streams(struct uas_dev_info *devinfo); 80 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, 81 int status); 82 83 static void uas_do_work(struct work_struct *work) 84 { 85 struct uas_dev_info *devinfo = 86 container_of(work, struct uas_dev_info, work); 87 struct uas_cmd_info *cmdinfo; 88 struct scsi_cmnd *cmnd; 89 unsigned long flags; 90 int i, err; 91 92 spin_lock_irqsave(&devinfo->lock, flags); 93 94 if (devinfo->resetting) 95 goto out; 96 97 for (i = 0; i < devinfo->qdepth; i++) { 98 if (!devinfo->cmnd[i]) 99 continue; 100 101 cmnd = devinfo->cmnd[i]; 102 cmdinfo = (void *)&cmnd->SCp; 103 104 if (!(cmdinfo->state & IS_IN_WORK_LIST)) 105 continue; 106 107 err = uas_submit_urbs(cmnd, cmnd->device->hostdata); 108 if (!err) 109 cmdinfo->state &= ~IS_IN_WORK_LIST; 110 else 111 schedule_work(&devinfo->work); 112 } 113 out: 114 spin_unlock_irqrestore(&devinfo->lock, flags); 115 } 116 117 static void uas_add_work(struct uas_cmd_info *cmdinfo) 118 { 119 struct scsi_pointer *scp = (void *)cmdinfo; 120 struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); 121 struct uas_dev_info *devinfo = cmnd->device->hostdata; 122 123 lockdep_assert_held(&devinfo->lock); 124 cmdinfo->state |= IS_IN_WORK_LIST; 125 schedule_work(&devinfo->work); 126 } 127 128 static void uas_zap_pending(struct uas_dev_info *devinfo, int result) 129 { 130 struct uas_cmd_info *cmdinfo; 131 struct scsi_cmnd *cmnd; 132 unsigned long flags; 133 int i, err; 134 135 spin_lock_irqsave(&devinfo->lock, flags); 136 for (i = 0; i < devinfo->qdepth; i++) { 137 if (!devinfo->cmnd[i]) 138 continue; 139 140 cmnd = devinfo->cmnd[i]; 141 cmdinfo = (void *)&cmnd->SCp; 142 uas_log_cmd_state(cmnd, __func__, 0); 143 /* Sense urbs were killed, clear COMMAND_INFLIGHT manually */ 144 cmdinfo->state &= ~COMMAND_INFLIGHT; 145 cmnd->result = result << 16; 146 err = uas_try_complete(cmnd, __func__); 147 WARN_ON(err != 0); 148 } 149 spin_unlock_irqrestore(&devinfo->lock, flags); 150 } 151 152 static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) 153 { 154 struct sense_iu *sense_iu = urb->transfer_buffer; 155 struct scsi_device *sdev = cmnd->device; 156 157 if (urb->actual_length > 16) { 158 unsigned len = be16_to_cpup(&sense_iu->len); 159 if (len + 16 != urb->actual_length) { 160 int newlen = min(len + 16, urb->actual_length) - 16; 161 if (newlen < 0) 162 newlen = 0; 163 sdev_printk(KERN_INFO, sdev, "%s: urb length %d " 164 "disagrees with IU sense data length %d, " 165 "using %d bytes of sense data\n", __func__, 166 urb->actual_length, len, newlen); 167 len = newlen; 168 } 169 memcpy(cmnd->sense_buffer, sense_iu->sense, len); 170 } 171 172 cmnd->result = sense_iu->status; 173 } 174 175 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, 176 int status) 177 { 178 struct uas_cmd_info *ci = (void *)&cmnd->SCp; 179 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 180 181 scmd_printk(KERN_INFO, cmnd, 182 "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ", 183 prefix, status, cmdinfo->uas_tag, 184 (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "", 185 (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "", 186 (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "", 187 (ci->state & ALLOC_DATA_OUT_URB) ? " a-out" : "", 188 (ci->state & SUBMIT_DATA_OUT_URB) ? " s-out" : "", 189 (ci->state & ALLOC_CMD_URB) ? " a-cmd" : "", 190 (ci->state & SUBMIT_CMD_URB) ? " s-cmd" : "", 191 (ci->state & COMMAND_INFLIGHT) ? " CMD" : "", 192 (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "", 193 (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "", 194 (ci->state & COMMAND_ABORTED) ? " abort" : "", 195 (ci->state & IS_IN_WORK_LIST) ? " work" : ""); 196 scsi_print_command(cmnd); 197 } 198 199 static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd) 200 { 201 struct uas_cmd_info *cmdinfo; 202 203 if (!cmnd) 204 return; 205 206 cmdinfo = (void *)&cmnd->SCp; 207 208 if (cmdinfo->state & SUBMIT_CMD_URB) 209 usb_free_urb(cmdinfo->cmd_urb); 210 211 /* data urbs may have never gotten their submit flag set */ 212 if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT)) 213 usb_free_urb(cmdinfo->data_in_urb); 214 if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) 215 usb_free_urb(cmdinfo->data_out_urb); 216 } 217 218 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) 219 { 220 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 221 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; 222 223 lockdep_assert_held(&devinfo->lock); 224 if (cmdinfo->state & (COMMAND_INFLIGHT | 225 DATA_IN_URB_INFLIGHT | 226 DATA_OUT_URB_INFLIGHT | 227 COMMAND_ABORTED)) 228 return -EBUSY; 229 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; 230 uas_free_unsubmitted_urbs(cmnd); 231 cmnd->scsi_done(cmnd); 232 return 0; 233 } 234 235 static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, 236 unsigned direction) 237 { 238 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 239 int err; 240 241 cmdinfo->state |= direction | SUBMIT_STATUS_URB; 242 err = uas_submit_urbs(cmnd, cmnd->device->hostdata); 243 if (err) { 244 uas_add_work(cmdinfo); 245 } 246 } 247 248 static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd) 249 { 250 u8 response_code = riu->response_code; 251 252 switch (response_code) { 253 case RC_INCORRECT_LUN: 254 cmnd->result = DID_BAD_TARGET << 16; 255 break; 256 case RC_TMF_SUCCEEDED: 257 cmnd->result = DID_OK << 16; 258 break; 259 case RC_TMF_NOT_SUPPORTED: 260 cmnd->result = DID_TARGET_FAILURE << 16; 261 break; 262 default: 263 uas_log_cmd_state(cmnd, "response iu", response_code); 264 cmnd->result = DID_ERROR << 16; 265 break; 266 } 267 268 return response_code == RC_TMF_SUCCEEDED; 269 } 270 271 static void uas_stat_cmplt(struct urb *urb) 272 { 273 struct iu *iu = urb->transfer_buffer; 274 struct Scsi_Host *shost = urb->context; 275 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 276 struct urb *data_in_urb = NULL; 277 struct urb *data_out_urb = NULL; 278 struct scsi_cmnd *cmnd; 279 struct uas_cmd_info *cmdinfo; 280 unsigned long flags; 281 unsigned int idx; 282 int status = urb->status; 283 bool success; 284 285 spin_lock_irqsave(&devinfo->lock, flags); 286 287 if (devinfo->resetting) 288 goto out; 289 290 if (status) { 291 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) 292 dev_err(&urb->dev->dev, "stat urb: status %d\n", status); 293 goto out; 294 } 295 296 idx = be16_to_cpup(&iu->tag) - 1; 297 if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) { 298 dev_err(&urb->dev->dev, 299 "stat urb: no pending cmd for uas-tag %d\n", idx + 1); 300 goto out; 301 } 302 303 cmnd = devinfo->cmnd[idx]; 304 cmdinfo = (void *)&cmnd->SCp; 305 306 if (!(cmdinfo->state & COMMAND_INFLIGHT)) { 307 uas_log_cmd_state(cmnd, "unexpected status cmplt", 0); 308 goto out; 309 } 310 311 switch (iu->iu_id) { 312 case IU_ID_STATUS: 313 uas_sense(urb, cmnd); 314 if (cmnd->result != 0) { 315 /* cancel data transfers on error */ 316 data_in_urb = usb_get_urb(cmdinfo->data_in_urb); 317 data_out_urb = usb_get_urb(cmdinfo->data_out_urb); 318 } 319 cmdinfo->state &= ~COMMAND_INFLIGHT; 320 uas_try_complete(cmnd, __func__); 321 break; 322 case IU_ID_READ_READY: 323 if (!cmdinfo->data_in_urb || 324 (cmdinfo->state & DATA_IN_URB_INFLIGHT)) { 325 uas_log_cmd_state(cmnd, "unexpected read rdy", 0); 326 break; 327 } 328 uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB); 329 break; 330 case IU_ID_WRITE_READY: 331 if (!cmdinfo->data_out_urb || 332 (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) { 333 uas_log_cmd_state(cmnd, "unexpected write rdy", 0); 334 break; 335 } 336 uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); 337 break; 338 case IU_ID_RESPONSE: 339 cmdinfo->state &= ~COMMAND_INFLIGHT; 340 success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd); 341 if (!success) { 342 /* Error, cancel data transfers */ 343 data_in_urb = usb_get_urb(cmdinfo->data_in_urb); 344 data_out_urb = usb_get_urb(cmdinfo->data_out_urb); 345 } 346 uas_try_complete(cmnd, __func__); 347 break; 348 default: 349 uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id); 350 } 351 out: 352 usb_free_urb(urb); 353 spin_unlock_irqrestore(&devinfo->lock, flags); 354 355 /* Unlinking of data urbs must be done without holding the lock */ 356 if (data_in_urb) { 357 usb_unlink_urb(data_in_urb); 358 usb_put_urb(data_in_urb); 359 } 360 if (data_out_urb) { 361 usb_unlink_urb(data_out_urb); 362 usb_put_urb(data_out_urb); 363 } 364 } 365 366 static void uas_data_cmplt(struct urb *urb) 367 { 368 struct scsi_cmnd *cmnd = urb->context; 369 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 370 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; 371 struct scsi_data_buffer *sdb = NULL; 372 unsigned long flags; 373 int status = urb->status; 374 375 spin_lock_irqsave(&devinfo->lock, flags); 376 377 if (cmdinfo->data_in_urb == urb) { 378 sdb = scsi_in(cmnd); 379 cmdinfo->state &= ~DATA_IN_URB_INFLIGHT; 380 cmdinfo->data_in_urb = NULL; 381 } else if (cmdinfo->data_out_urb == urb) { 382 sdb = scsi_out(cmnd); 383 cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT; 384 cmdinfo->data_out_urb = NULL; 385 } 386 if (sdb == NULL) { 387 WARN_ON_ONCE(1); 388 goto out; 389 } 390 391 if (devinfo->resetting) 392 goto out; 393 394 /* Data urbs should not complete before the cmd urb is submitted */ 395 if (cmdinfo->state & SUBMIT_CMD_URB) { 396 uas_log_cmd_state(cmnd, "unexpected data cmplt", 0); 397 goto out; 398 } 399 400 if (status) { 401 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) 402 uas_log_cmd_state(cmnd, "data cmplt err", status); 403 /* error: no data transfered */ 404 sdb->resid = sdb->length; 405 } else { 406 sdb->resid = sdb->length - urb->actual_length; 407 } 408 uas_try_complete(cmnd, __func__); 409 out: 410 usb_free_urb(urb); 411 spin_unlock_irqrestore(&devinfo->lock, flags); 412 } 413 414 static void uas_cmd_cmplt(struct urb *urb) 415 { 416 if (urb->status) 417 dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status); 418 419 usb_free_urb(urb); 420 } 421 422 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, 423 struct scsi_cmnd *cmnd, 424 enum dma_data_direction dir) 425 { 426 struct usb_device *udev = devinfo->udev; 427 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 428 struct urb *urb = usb_alloc_urb(0, gfp); 429 struct scsi_data_buffer *sdb = (dir == DMA_FROM_DEVICE) 430 ? scsi_in(cmnd) : scsi_out(cmnd); 431 unsigned int pipe = (dir == DMA_FROM_DEVICE) 432 ? devinfo->data_in_pipe : devinfo->data_out_pipe; 433 434 if (!urb) 435 goto out; 436 usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, 437 uas_data_cmplt, cmnd); 438 if (devinfo->use_streams) 439 urb->stream_id = cmdinfo->uas_tag; 440 urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; 441 urb->sg = sdb->table.sgl; 442 out: 443 return urb; 444 } 445 446 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, 447 struct scsi_cmnd *cmnd) 448 { 449 struct usb_device *udev = devinfo->udev; 450 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 451 struct urb *urb = usb_alloc_urb(0, gfp); 452 struct sense_iu *iu; 453 454 if (!urb) 455 goto out; 456 457 iu = kzalloc(sizeof(*iu), gfp); 458 if (!iu) 459 goto free; 460 461 usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), 462 uas_stat_cmplt, cmnd->device->host); 463 if (devinfo->use_streams) 464 urb->stream_id = cmdinfo->uas_tag; 465 urb->transfer_flags |= URB_FREE_BUFFER; 466 out: 467 return urb; 468 free: 469 usb_free_urb(urb); 470 return NULL; 471 } 472 473 static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, 474 struct scsi_cmnd *cmnd) 475 { 476 struct usb_device *udev = devinfo->udev; 477 struct scsi_device *sdev = cmnd->device; 478 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 479 struct urb *urb = usb_alloc_urb(0, gfp); 480 struct command_iu *iu; 481 int len; 482 483 if (!urb) 484 goto out; 485 486 len = cmnd->cmd_len - 16; 487 if (len < 0) 488 len = 0; 489 len = ALIGN(len, 4); 490 iu = kzalloc(sizeof(*iu) + len, gfp); 491 if (!iu) 492 goto free; 493 494 iu->iu_id = IU_ID_COMMAND; 495 iu->tag = cpu_to_be16(cmdinfo->uas_tag); 496 iu->prio_attr = UAS_SIMPLE_TAG; 497 iu->len = len; 498 int_to_scsilun(sdev->lun, &iu->lun); 499 memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); 500 501 usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len, 502 uas_cmd_cmplt, NULL); 503 urb->transfer_flags |= URB_FREE_BUFFER; 504 out: 505 return urb; 506 free: 507 usb_free_urb(urb); 508 return NULL; 509 } 510 511 /* 512 * Why should I request the Status IU before sending the Command IU? Spec 513 * says to, but also says the device may receive them in any order. Seems 514 * daft to me. 515 */ 516 517 static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) 518 { 519 struct uas_dev_info *devinfo = cmnd->device->hostdata; 520 struct urb *urb; 521 int err; 522 523 urb = uas_alloc_sense_urb(devinfo, gfp, cmnd); 524 if (!urb) 525 return NULL; 526 usb_anchor_urb(urb, &devinfo->sense_urbs); 527 err = usb_submit_urb(urb, gfp); 528 if (err) { 529 usb_unanchor_urb(urb); 530 uas_log_cmd_state(cmnd, "sense submit err", err); 531 usb_free_urb(urb); 532 return NULL; 533 } 534 return urb; 535 } 536 537 static int uas_submit_urbs(struct scsi_cmnd *cmnd, 538 struct uas_dev_info *devinfo) 539 { 540 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 541 struct urb *urb; 542 int err; 543 544 lockdep_assert_held(&devinfo->lock); 545 if (cmdinfo->state & SUBMIT_STATUS_URB) { 546 urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC); 547 if (!urb) 548 return SCSI_MLQUEUE_DEVICE_BUSY; 549 cmdinfo->state &= ~SUBMIT_STATUS_URB; 550 } 551 552 if (cmdinfo->state & ALLOC_DATA_IN_URB) { 553 cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, 554 cmnd, DMA_FROM_DEVICE); 555 if (!cmdinfo->data_in_urb) 556 return SCSI_MLQUEUE_DEVICE_BUSY; 557 cmdinfo->state &= ~ALLOC_DATA_IN_URB; 558 } 559 560 if (cmdinfo->state & SUBMIT_DATA_IN_URB) { 561 usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs); 562 err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC); 563 if (err) { 564 usb_unanchor_urb(cmdinfo->data_in_urb); 565 uas_log_cmd_state(cmnd, "data in submit err", err); 566 return SCSI_MLQUEUE_DEVICE_BUSY; 567 } 568 cmdinfo->state &= ~SUBMIT_DATA_IN_URB; 569 cmdinfo->state |= DATA_IN_URB_INFLIGHT; 570 } 571 572 if (cmdinfo->state & ALLOC_DATA_OUT_URB) { 573 cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, 574 cmnd, DMA_TO_DEVICE); 575 if (!cmdinfo->data_out_urb) 576 return SCSI_MLQUEUE_DEVICE_BUSY; 577 cmdinfo->state &= ~ALLOC_DATA_OUT_URB; 578 } 579 580 if (cmdinfo->state & SUBMIT_DATA_OUT_URB) { 581 usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs); 582 err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC); 583 if (err) { 584 usb_unanchor_urb(cmdinfo->data_out_urb); 585 uas_log_cmd_state(cmnd, "data out submit err", err); 586 return SCSI_MLQUEUE_DEVICE_BUSY; 587 } 588 cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; 589 cmdinfo->state |= DATA_OUT_URB_INFLIGHT; 590 } 591 592 if (cmdinfo->state & ALLOC_CMD_URB) { 593 cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd); 594 if (!cmdinfo->cmd_urb) 595 return SCSI_MLQUEUE_DEVICE_BUSY; 596 cmdinfo->state &= ~ALLOC_CMD_URB; 597 } 598 599 if (cmdinfo->state & SUBMIT_CMD_URB) { 600 usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); 601 err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC); 602 if (err) { 603 usb_unanchor_urb(cmdinfo->cmd_urb); 604 uas_log_cmd_state(cmnd, "cmd submit err", err); 605 return SCSI_MLQUEUE_DEVICE_BUSY; 606 } 607 cmdinfo->cmd_urb = NULL; 608 cmdinfo->state &= ~SUBMIT_CMD_URB; 609 cmdinfo->state |= COMMAND_INFLIGHT; 610 } 611 612 return 0; 613 } 614 615 static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, 616 void (*done)(struct scsi_cmnd *)) 617 { 618 struct scsi_device *sdev = cmnd->device; 619 struct uas_dev_info *devinfo = sdev->hostdata; 620 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 621 unsigned long flags; 622 int idx, err; 623 624 BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); 625 626 /* Re-check scsi_block_requests now that we've the host-lock */ 627 if (cmnd->device->host->host_self_blocked) 628 return SCSI_MLQUEUE_DEVICE_BUSY; 629 630 if ((devinfo->flags & US_FL_NO_ATA_1X) && 631 (cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) { 632 memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB, 633 sizeof(usb_stor_sense_invalidCDB)); 634 cmnd->result = SAM_STAT_CHECK_CONDITION; 635 cmnd->scsi_done(cmnd); 636 return 0; 637 } 638 639 spin_lock_irqsave(&devinfo->lock, flags); 640 641 if (devinfo->resetting) { 642 cmnd->result = DID_ERROR << 16; 643 cmnd->scsi_done(cmnd); 644 spin_unlock_irqrestore(&devinfo->lock, flags); 645 return 0; 646 } 647 648 /* Find a free uas-tag */ 649 for (idx = 0; idx < devinfo->qdepth; idx++) { 650 if (!devinfo->cmnd[idx]) 651 break; 652 } 653 if (idx == devinfo->qdepth) { 654 spin_unlock_irqrestore(&devinfo->lock, flags); 655 return SCSI_MLQUEUE_DEVICE_BUSY; 656 } 657 658 cmnd->scsi_done = done; 659 660 memset(cmdinfo, 0, sizeof(*cmdinfo)); 661 cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */ 662 cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB; 663 664 switch (cmnd->sc_data_direction) { 665 case DMA_FROM_DEVICE: 666 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; 667 break; 668 case DMA_BIDIRECTIONAL: 669 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; 670 /* fall through */ 671 case DMA_TO_DEVICE: 672 cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB; 673 case DMA_NONE: 674 break; 675 } 676 677 if (!devinfo->use_streams) 678 cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); 679 680 err = uas_submit_urbs(cmnd, devinfo); 681 if (err) { 682 /* If we did nothing, give up now */ 683 if (cmdinfo->state & SUBMIT_STATUS_URB) { 684 spin_unlock_irqrestore(&devinfo->lock, flags); 685 return SCSI_MLQUEUE_DEVICE_BUSY; 686 } 687 uas_add_work(cmdinfo); 688 } 689 690 devinfo->cmnd[idx] = cmnd; 691 spin_unlock_irqrestore(&devinfo->lock, flags); 692 return 0; 693 } 694 695 static DEF_SCSI_QCMD(uas_queuecommand) 696 697 /* 698 * For now we do not support actually sending an abort to the device, so 699 * this eh always fails. Still we must define it to make sure that we've 700 * dropped all references to the cmnd in question once this function exits. 701 */ 702 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) 703 { 704 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; 705 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; 706 struct urb *data_in_urb = NULL; 707 struct urb *data_out_urb = NULL; 708 unsigned long flags; 709 710 spin_lock_irqsave(&devinfo->lock, flags); 711 712 uas_log_cmd_state(cmnd, __func__, 0); 713 714 /* Ensure that try_complete does not call scsi_done */ 715 cmdinfo->state |= COMMAND_ABORTED; 716 717 /* Drop all refs to this cmnd, kill data urbs to break their ref */ 718 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; 719 if (cmdinfo->state & DATA_IN_URB_INFLIGHT) 720 data_in_urb = usb_get_urb(cmdinfo->data_in_urb); 721 if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) 722 data_out_urb = usb_get_urb(cmdinfo->data_out_urb); 723 724 uas_free_unsubmitted_urbs(cmnd); 725 726 spin_unlock_irqrestore(&devinfo->lock, flags); 727 728 if (data_in_urb) { 729 usb_kill_urb(data_in_urb); 730 usb_put_urb(data_in_urb); 731 } 732 if (data_out_urb) { 733 usb_kill_urb(data_out_urb); 734 usb_put_urb(data_out_urb); 735 } 736 737 return FAILED; 738 } 739 740 static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd) 741 { 742 struct scsi_device *sdev = cmnd->device; 743 struct uas_dev_info *devinfo = sdev->hostdata; 744 struct usb_device *udev = devinfo->udev; 745 unsigned long flags; 746 int err; 747 748 err = usb_lock_device_for_reset(udev, devinfo->intf); 749 if (err) { 750 shost_printk(KERN_ERR, sdev->host, 751 "%s FAILED to get lock err %d\n", __func__, err); 752 return FAILED; 753 } 754 755 shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__); 756 757 spin_lock_irqsave(&devinfo->lock, flags); 758 devinfo->resetting = 1; 759 spin_unlock_irqrestore(&devinfo->lock, flags); 760 761 usb_kill_anchored_urbs(&devinfo->cmd_urbs); 762 usb_kill_anchored_urbs(&devinfo->sense_urbs); 763 usb_kill_anchored_urbs(&devinfo->data_urbs); 764 uas_zap_pending(devinfo, DID_RESET); 765 766 err = usb_reset_device(udev); 767 768 spin_lock_irqsave(&devinfo->lock, flags); 769 devinfo->resetting = 0; 770 spin_unlock_irqrestore(&devinfo->lock, flags); 771 772 usb_unlock_device(udev); 773 774 if (err) { 775 shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n", 776 __func__, err); 777 return FAILED; 778 } 779 780 shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__); 781 return SUCCESS; 782 } 783 784 static int uas_target_alloc(struct scsi_target *starget) 785 { 786 struct uas_dev_info *devinfo = (struct uas_dev_info *) 787 dev_to_shost(starget->dev.parent)->hostdata; 788 789 if (devinfo->flags & US_FL_NO_REPORT_LUNS) 790 starget->no_report_luns = 1; 791 792 return 0; 793 } 794 795 static int uas_slave_alloc(struct scsi_device *sdev) 796 { 797 struct uas_dev_info *devinfo = 798 (struct uas_dev_info *)sdev->host->hostdata; 799 800 sdev->hostdata = devinfo; 801 802 /* 803 * USB has unusual DMA-alignment requirements: Although the 804 * starting address of each scatter-gather element doesn't matter, 805 * the length of each element except the last must be divisible 806 * by the Bulk maxpacket value. There's currently no way to 807 * express this by block-layer constraints, so we'll cop out 808 * and simply require addresses to be aligned at 512-byte 809 * boundaries. This is okay since most block I/O involves 810 * hardware sectors that are multiples of 512 bytes in length, 811 * and since host controllers up through USB 2.0 have maxpacket 812 * values no larger than 512. 813 * 814 * But it doesn't suffice for Wireless USB, where Bulk maxpacket 815 * values can be as large as 2048. To make that work properly 816 * will require changes to the block layer. 817 */ 818 blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); 819 820 if (devinfo->flags & US_FL_MAX_SECTORS_64) 821 blk_queue_max_hw_sectors(sdev->request_queue, 64); 822 else if (devinfo->flags & US_FL_MAX_SECTORS_240) 823 blk_queue_max_hw_sectors(sdev->request_queue, 240); 824 825 return 0; 826 } 827 828 static int uas_slave_configure(struct scsi_device *sdev) 829 { 830 struct uas_dev_info *devinfo = sdev->hostdata; 831 832 if (devinfo->flags & US_FL_NO_REPORT_OPCODES) 833 sdev->no_report_opcodes = 1; 834 835 /* A few buggy USB-ATA bridges don't understand FUA */ 836 if (devinfo->flags & US_FL_BROKEN_FUA) 837 sdev->broken_fua = 1; 838 839 /* UAS also needs to support FL_ALWAYS_SYNC */ 840 if (devinfo->flags & US_FL_ALWAYS_SYNC) { 841 sdev->skip_ms_page_3f = 1; 842 sdev->skip_ms_page_8 = 1; 843 sdev->wce_default_on = 1; 844 } 845 846 /* 847 * Some disks return the total number of blocks in response 848 * to READ CAPACITY rather than the highest block number. 849 * If this device makes that mistake, tell the sd driver. 850 */ 851 if (devinfo->flags & US_FL_FIX_CAPACITY) 852 sdev->fix_capacity = 1; 853 854 /* 855 * Some devices don't like MODE SENSE with page=0x3f, 856 * which is the command used for checking if a device 857 * is write-protected. Now that we tell the sd driver 858 * to do a 192-byte transfer with this command the 859 * majority of devices work fine, but a few still can't 860 * handle it. The sd driver will simply assume those 861 * devices are write-enabled. 862 */ 863 if (devinfo->flags & US_FL_NO_WP_DETECT) 864 sdev->skip_ms_page_3f = 1; 865 866 scsi_change_queue_depth(sdev, devinfo->qdepth - 2); 867 return 0; 868 } 869 870 static struct scsi_host_template uas_host_template = { 871 .module = THIS_MODULE, 872 .name = "uas", 873 .queuecommand = uas_queuecommand, 874 .target_alloc = uas_target_alloc, 875 .slave_alloc = uas_slave_alloc, 876 .slave_configure = uas_slave_configure, 877 .eh_abort_handler = uas_eh_abort_handler, 878 .eh_device_reset_handler = uas_eh_device_reset_handler, 879 .this_id = -1, 880 .sg_tablesize = SG_NONE, 881 .skip_settle_delay = 1, 882 .dma_boundary = PAGE_SIZE - 1, 883 }; 884 885 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ 886 vendorName, productName, useProtocol, useTransport, \ 887 initFunction, flags) \ 888 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ 889 .driver_info = (flags) } 890 891 static struct usb_device_id uas_usb_ids[] = { 892 # include "unusual_uas.h" 893 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, 894 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) }, 895 { } 896 }; 897 MODULE_DEVICE_TABLE(usb, uas_usb_ids); 898 899 #undef UNUSUAL_DEV 900 901 static int uas_switch_interface(struct usb_device *udev, 902 struct usb_interface *intf) 903 { 904 struct usb_host_interface *alt; 905 906 alt = uas_find_uas_alt_setting(intf); 907 if (!alt) 908 return -ENODEV; 909 910 return usb_set_interface(udev, alt->desc.bInterfaceNumber, 911 alt->desc.bAlternateSetting); 912 } 913 914 static int uas_configure_endpoints(struct uas_dev_info *devinfo) 915 { 916 struct usb_host_endpoint *eps[4] = { }; 917 struct usb_device *udev = devinfo->udev; 918 int r; 919 920 r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps); 921 if (r) 922 return r; 923 924 devinfo->cmd_pipe = usb_sndbulkpipe(udev, 925 usb_endpoint_num(&eps[0]->desc)); 926 devinfo->status_pipe = usb_rcvbulkpipe(udev, 927 usb_endpoint_num(&eps[1]->desc)); 928 devinfo->data_in_pipe = usb_rcvbulkpipe(udev, 929 usb_endpoint_num(&eps[2]->desc)); 930 devinfo->data_out_pipe = usb_sndbulkpipe(udev, 931 usb_endpoint_num(&eps[3]->desc)); 932 933 if (udev->speed < USB_SPEED_SUPER) { 934 devinfo->qdepth = 32; 935 devinfo->use_streams = 0; 936 } else { 937 devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, 938 3, MAX_CMNDS, GFP_NOIO); 939 if (devinfo->qdepth < 0) 940 return devinfo->qdepth; 941 devinfo->use_streams = 1; 942 } 943 944 return 0; 945 } 946 947 static void uas_free_streams(struct uas_dev_info *devinfo) 948 { 949 struct usb_device *udev = devinfo->udev; 950 struct usb_host_endpoint *eps[3]; 951 952 eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); 953 eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); 954 eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); 955 usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO); 956 } 957 958 static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) 959 { 960 int result = -ENOMEM; 961 struct Scsi_Host *shost = NULL; 962 struct uas_dev_info *devinfo; 963 struct usb_device *udev = interface_to_usbdev(intf); 964 unsigned long dev_flags; 965 966 if (!uas_use_uas_driver(intf, id, &dev_flags)) 967 return -ENODEV; 968 969 if (uas_switch_interface(udev, intf)) 970 return -ENODEV; 971 972 shost = scsi_host_alloc(&uas_host_template, 973 sizeof(struct uas_dev_info)); 974 if (!shost) 975 goto set_alt0; 976 977 shost->max_cmd_len = 16 + 252; 978 shost->max_id = 1; 979 shost->max_lun = 256; 980 shost->max_channel = 0; 981 shost->sg_tablesize = udev->bus->sg_tablesize; 982 983 devinfo = (struct uas_dev_info *)shost->hostdata; 984 devinfo->intf = intf; 985 devinfo->udev = udev; 986 devinfo->resetting = 0; 987 devinfo->shutdown = 0; 988 devinfo->flags = dev_flags; 989 init_usb_anchor(&devinfo->cmd_urbs); 990 init_usb_anchor(&devinfo->sense_urbs); 991 init_usb_anchor(&devinfo->data_urbs); 992 spin_lock_init(&devinfo->lock); 993 INIT_WORK(&devinfo->work, uas_do_work); 994 995 result = uas_configure_endpoints(devinfo); 996 if (result) 997 goto set_alt0; 998 999 /* 1000 * 1 tag is reserved for untagged commands + 1001 * 1 tag to avoid off by one errors in some bridge firmwares 1002 */ 1003 shost->can_queue = devinfo->qdepth - 2; 1004 1005 usb_set_intfdata(intf, shost); 1006 result = scsi_add_host(shost, &intf->dev); 1007 if (result) 1008 goto free_streams; 1009 1010 scsi_scan_host(shost); 1011 return result; 1012 1013 free_streams: 1014 uas_free_streams(devinfo); 1015 usb_set_intfdata(intf, NULL); 1016 set_alt0: 1017 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); 1018 if (shost) 1019 scsi_host_put(shost); 1020 return result; 1021 } 1022 1023 static int uas_cmnd_list_empty(struct uas_dev_info *devinfo) 1024 { 1025 unsigned long flags; 1026 int i, r = 1; 1027 1028 spin_lock_irqsave(&devinfo->lock, flags); 1029 1030 for (i = 0; i < devinfo->qdepth; i++) { 1031 if (devinfo->cmnd[i]) { 1032 r = 0; /* Not empty */ 1033 break; 1034 } 1035 } 1036 1037 spin_unlock_irqrestore(&devinfo->lock, flags); 1038 1039 return r; 1040 } 1041 1042 /* 1043 * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily 1044 * get empty while there still is more work to do due to sense-urbs completing 1045 * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty. 1046 */ 1047 static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo) 1048 { 1049 unsigned long start_time; 1050 int r; 1051 1052 start_time = jiffies; 1053 do { 1054 flush_work(&devinfo->work); 1055 1056 r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000); 1057 if (r == 0) 1058 return -ETIME; 1059 1060 r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500); 1061 if (r == 0) 1062 return -ETIME; 1063 1064 if (time_after(jiffies, start_time + 5 * HZ)) 1065 return -ETIME; 1066 } while (!uas_cmnd_list_empty(devinfo)); 1067 1068 return 0; 1069 } 1070 1071 static int uas_pre_reset(struct usb_interface *intf) 1072 { 1073 struct Scsi_Host *shost = usb_get_intfdata(intf); 1074 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1075 unsigned long flags; 1076 1077 if (devinfo->shutdown) 1078 return 0; 1079 1080 /* Block new requests */ 1081 spin_lock_irqsave(shost->host_lock, flags); 1082 scsi_block_requests(shost); 1083 spin_unlock_irqrestore(shost->host_lock, flags); 1084 1085 if (uas_wait_for_pending_cmnds(devinfo) != 0) { 1086 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); 1087 scsi_unblock_requests(shost); 1088 return 1; 1089 } 1090 1091 uas_free_streams(devinfo); 1092 1093 return 0; 1094 } 1095 1096 static int uas_post_reset(struct usb_interface *intf) 1097 { 1098 struct Scsi_Host *shost = usb_get_intfdata(intf); 1099 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1100 unsigned long flags; 1101 int err; 1102 1103 if (devinfo->shutdown) 1104 return 0; 1105 1106 err = uas_configure_endpoints(devinfo); 1107 if (err && err != -ENODEV) 1108 shost_printk(KERN_ERR, shost, 1109 "%s: alloc streams error %d after reset", 1110 __func__, err); 1111 1112 /* we must unblock the host in every case lest we deadlock */ 1113 spin_lock_irqsave(shost->host_lock, flags); 1114 scsi_report_bus_reset(shost, 0); 1115 spin_unlock_irqrestore(shost->host_lock, flags); 1116 1117 scsi_unblock_requests(shost); 1118 1119 return err ? 1 : 0; 1120 } 1121 1122 static int uas_suspend(struct usb_interface *intf, pm_message_t message) 1123 { 1124 struct Scsi_Host *shost = usb_get_intfdata(intf); 1125 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1126 1127 if (uas_wait_for_pending_cmnds(devinfo) != 0) { 1128 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); 1129 return -ETIME; 1130 } 1131 1132 return 0; 1133 } 1134 1135 static int uas_resume(struct usb_interface *intf) 1136 { 1137 return 0; 1138 } 1139 1140 static int uas_reset_resume(struct usb_interface *intf) 1141 { 1142 struct Scsi_Host *shost = usb_get_intfdata(intf); 1143 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1144 unsigned long flags; 1145 int err; 1146 1147 err = uas_configure_endpoints(devinfo); 1148 if (err) { 1149 shost_printk(KERN_ERR, shost, 1150 "%s: alloc streams error %d after reset", 1151 __func__, err); 1152 return -EIO; 1153 } 1154 1155 spin_lock_irqsave(shost->host_lock, flags); 1156 scsi_report_bus_reset(shost, 0); 1157 spin_unlock_irqrestore(shost->host_lock, flags); 1158 1159 return 0; 1160 } 1161 1162 static void uas_disconnect(struct usb_interface *intf) 1163 { 1164 struct Scsi_Host *shost = usb_get_intfdata(intf); 1165 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1166 unsigned long flags; 1167 1168 spin_lock_irqsave(&devinfo->lock, flags); 1169 devinfo->resetting = 1; 1170 spin_unlock_irqrestore(&devinfo->lock, flags); 1171 1172 cancel_work_sync(&devinfo->work); 1173 usb_kill_anchored_urbs(&devinfo->cmd_urbs); 1174 usb_kill_anchored_urbs(&devinfo->sense_urbs); 1175 usb_kill_anchored_urbs(&devinfo->data_urbs); 1176 uas_zap_pending(devinfo, DID_NO_CONNECT); 1177 1178 scsi_remove_host(shost); 1179 uas_free_streams(devinfo); 1180 scsi_host_put(shost); 1181 } 1182 1183 /* 1184 * Put the device back in usb-storage mode on shutdown, as some BIOS-es 1185 * hang on reboot when the device is still in uas mode. Note the reset is 1186 * necessary as some devices won't revert to usb-storage mode without it. 1187 */ 1188 static void uas_shutdown(struct device *dev) 1189 { 1190 struct usb_interface *intf = to_usb_interface(dev); 1191 struct usb_device *udev = interface_to_usbdev(intf); 1192 struct Scsi_Host *shost = usb_get_intfdata(intf); 1193 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1194 1195 if (system_state != SYSTEM_RESTART) 1196 return; 1197 1198 devinfo->shutdown = 1; 1199 uas_free_streams(devinfo); 1200 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); 1201 usb_reset_device(udev); 1202 } 1203 1204 static struct usb_driver uas_driver = { 1205 .name = "uas", 1206 .probe = uas_probe, 1207 .disconnect = uas_disconnect, 1208 .pre_reset = uas_pre_reset, 1209 .post_reset = uas_post_reset, 1210 .suspend = uas_suspend, 1211 .resume = uas_resume, 1212 .reset_resume = uas_reset_resume, 1213 .drvwrap.driver.shutdown = uas_shutdown, 1214 .id_table = uas_usb_ids, 1215 }; 1216 1217 module_usb_driver(uas_driver); 1218 1219 MODULE_LICENSE("GPL"); 1220 MODULE_AUTHOR( 1221 "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp"); 1222