xref: /openbmc/linux/drivers/usb/storage/uas.c (revision 91b0383f)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * USB Attached SCSI
4  * Note that this is not the same as the USB Mass Storage driver
5  *
6  * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
7  * Copyright Matthew Wilcox for Intel Corp, 2010
8  * Copyright Sarah Sharp for Intel Corp, 2010
9  */
10 
11 #include <linux/blkdev.h>
12 #include <linux/slab.h>
13 #include <linux/types.h>
14 #include <linux/module.h>
15 #include <linux/usb.h>
16 #include <linux/usb_usual.h>
17 #include <linux/usb/hcd.h>
18 #include <linux/usb/storage.h>
19 #include <linux/usb/uas.h>
20 
21 #include <scsi/scsi.h>
22 #include <scsi/scsi_eh.h>
23 #include <scsi/scsi_dbg.h>
24 #include <scsi/scsi_cmnd.h>
25 #include <scsi/scsi_device.h>
26 #include <scsi/scsi_host.h>
27 #include <scsi/scsi_tcq.h>
28 
29 #include "uas-detect.h"
30 #include "scsiglue.h"
31 
32 #define MAX_CMNDS 256
33 
34 struct uas_dev_info {
35 	struct usb_interface *intf;
36 	struct usb_device *udev;
37 	struct usb_anchor cmd_urbs;
38 	struct usb_anchor sense_urbs;
39 	struct usb_anchor data_urbs;
40 	unsigned long flags;
41 	int qdepth, resetting;
42 	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
43 	unsigned use_streams:1;
44 	unsigned shutdown:1;
45 	struct scsi_cmnd *cmnd[MAX_CMNDS];
46 	spinlock_t lock;
47 	struct work_struct work;
48 	struct work_struct scan_work;      /* for async scanning */
49 };
50 
51 enum {
52 	SUBMIT_STATUS_URB	= BIT(1),
53 	ALLOC_DATA_IN_URB	= BIT(2),
54 	SUBMIT_DATA_IN_URB	= BIT(3),
55 	ALLOC_DATA_OUT_URB	= BIT(4),
56 	SUBMIT_DATA_OUT_URB	= BIT(5),
57 	ALLOC_CMD_URB		= BIT(6),
58 	SUBMIT_CMD_URB		= BIT(7),
59 	COMMAND_INFLIGHT        = BIT(8),
60 	DATA_IN_URB_INFLIGHT    = BIT(9),
61 	DATA_OUT_URB_INFLIGHT   = BIT(10),
62 	COMMAND_ABORTED         = BIT(11),
63 	IS_IN_WORK_LIST         = BIT(12),
64 };
65 
66 /* Overrides scsi_pointer */
67 struct uas_cmd_info {
68 	unsigned int state;
69 	unsigned int uas_tag;
70 	struct urb *cmd_urb;
71 	struct urb *data_in_urb;
72 	struct urb *data_out_urb;
73 };
74 
75 /* I hate forward declarations, but I actually have a loop */
76 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
77 				struct uas_dev_info *devinfo);
78 static void uas_do_work(struct work_struct *work);
79 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
80 static void uas_free_streams(struct uas_dev_info *devinfo);
81 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
82 				int status);
83 
84 /*
85  * This driver needs its own workqueue, as we need to control memory allocation.
86  *
87  * In the course of error handling and power management uas_wait_for_pending_cmnds()
88  * needs to flush pending work items. In these contexts we cannot allocate memory
89  * by doing block IO as we would deadlock. For the same reason we cannot wait
90  * for anything allocating memory not heeding these constraints.
91  *
92  * So we have to control all work items that can be on the workqueue we flush.
93  * Hence we cannot share a queue and need our own.
94  */
95 static struct workqueue_struct *workqueue;
96 
97 static void uas_do_work(struct work_struct *work)
98 {
99 	struct uas_dev_info *devinfo =
100 		container_of(work, struct uas_dev_info, work);
101 	struct uas_cmd_info *cmdinfo;
102 	struct scsi_cmnd *cmnd;
103 	unsigned long flags;
104 	int i, err;
105 
106 	spin_lock_irqsave(&devinfo->lock, flags);
107 
108 	if (devinfo->resetting)
109 		goto out;
110 
111 	for (i = 0; i < devinfo->qdepth; i++) {
112 		if (!devinfo->cmnd[i])
113 			continue;
114 
115 		cmnd = devinfo->cmnd[i];
116 		cmdinfo = (void *)&cmnd->SCp;
117 
118 		if (!(cmdinfo->state & IS_IN_WORK_LIST))
119 			continue;
120 
121 		err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
122 		if (!err)
123 			cmdinfo->state &= ~IS_IN_WORK_LIST;
124 		else
125 			queue_work(workqueue, &devinfo->work);
126 	}
127 out:
128 	spin_unlock_irqrestore(&devinfo->lock, flags);
129 }
130 
131 static void uas_scan_work(struct work_struct *work)
132 {
133 	struct uas_dev_info *devinfo =
134 		container_of(work, struct uas_dev_info, scan_work);
135 	struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf);
136 
137 	dev_dbg(&devinfo->intf->dev, "starting scan\n");
138 	scsi_scan_host(shost);
139 	dev_dbg(&devinfo->intf->dev, "scan complete\n");
140 }
141 
142 static void uas_add_work(struct uas_cmd_info *cmdinfo)
143 {
144 	struct scsi_pointer *scp = (void *)cmdinfo;
145 	struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
146 	struct uas_dev_info *devinfo = cmnd->device->hostdata;
147 
148 	lockdep_assert_held(&devinfo->lock);
149 	cmdinfo->state |= IS_IN_WORK_LIST;
150 	queue_work(workqueue, &devinfo->work);
151 }
152 
153 static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
154 {
155 	struct uas_cmd_info *cmdinfo;
156 	struct scsi_cmnd *cmnd;
157 	unsigned long flags;
158 	int i, err;
159 
160 	spin_lock_irqsave(&devinfo->lock, flags);
161 	for (i = 0; i < devinfo->qdepth; i++) {
162 		if (!devinfo->cmnd[i])
163 			continue;
164 
165 		cmnd = devinfo->cmnd[i];
166 		cmdinfo = (void *)&cmnd->SCp;
167 		uas_log_cmd_state(cmnd, __func__, 0);
168 		/* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
169 		cmdinfo->state &= ~COMMAND_INFLIGHT;
170 		cmnd->result = result << 16;
171 		err = uas_try_complete(cmnd, __func__);
172 		WARN_ON(err != 0);
173 	}
174 	spin_unlock_irqrestore(&devinfo->lock, flags);
175 }
176 
177 static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
178 {
179 	struct sense_iu *sense_iu = urb->transfer_buffer;
180 	struct scsi_device *sdev = cmnd->device;
181 
182 	if (urb->actual_length > 16) {
183 		unsigned len = be16_to_cpup(&sense_iu->len);
184 		if (len + 16 != urb->actual_length) {
185 			int newlen = min(len + 16, urb->actual_length) - 16;
186 			if (newlen < 0)
187 				newlen = 0;
188 			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
189 				"disagrees with IU sense data length %d, "
190 				"using %d bytes of sense data\n", __func__,
191 					urb->actual_length, len, newlen);
192 			len = newlen;
193 		}
194 		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
195 	}
196 
197 	cmnd->result = sense_iu->status;
198 }
199 
200 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
201 			      int status)
202 {
203 	struct uas_cmd_info *ci = (void *)&cmnd->SCp;
204 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
205 
206 	if (status == -ENODEV) /* too late */
207 		return;
208 
209 	scmd_printk(KERN_INFO, cmnd,
210 		    "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
211 		    prefix, status, cmdinfo->uas_tag,
212 		    (ci->state & SUBMIT_STATUS_URB)     ? " s-st"  : "",
213 		    (ci->state & ALLOC_DATA_IN_URB)     ? " a-in"  : "",
214 		    (ci->state & SUBMIT_DATA_IN_URB)    ? " s-in"  : "",
215 		    (ci->state & ALLOC_DATA_OUT_URB)    ? " a-out" : "",
216 		    (ci->state & SUBMIT_DATA_OUT_URB)   ? " s-out" : "",
217 		    (ci->state & ALLOC_CMD_URB)         ? " a-cmd" : "",
218 		    (ci->state & SUBMIT_CMD_URB)        ? " s-cmd" : "",
219 		    (ci->state & COMMAND_INFLIGHT)      ? " CMD"   : "",
220 		    (ci->state & DATA_IN_URB_INFLIGHT)  ? " IN"    : "",
221 		    (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT"   : "",
222 		    (ci->state & COMMAND_ABORTED)       ? " abort" : "",
223 		    (ci->state & IS_IN_WORK_LIST)       ? " work"  : "");
224 	scsi_print_command(cmnd);
225 }
226 
227 static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
228 {
229 	struct uas_cmd_info *cmdinfo;
230 
231 	if (!cmnd)
232 		return;
233 
234 	cmdinfo = (void *)&cmnd->SCp;
235 
236 	if (cmdinfo->state & SUBMIT_CMD_URB)
237 		usb_free_urb(cmdinfo->cmd_urb);
238 
239 	/* data urbs may have never gotten their submit flag set */
240 	if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
241 		usb_free_urb(cmdinfo->data_in_urb);
242 	if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
243 		usb_free_urb(cmdinfo->data_out_urb);
244 }
245 
246 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
247 {
248 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
249 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
250 
251 	lockdep_assert_held(&devinfo->lock);
252 	if (cmdinfo->state & (COMMAND_INFLIGHT |
253 			      DATA_IN_URB_INFLIGHT |
254 			      DATA_OUT_URB_INFLIGHT |
255 			      COMMAND_ABORTED))
256 		return -EBUSY;
257 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
258 	uas_free_unsubmitted_urbs(cmnd);
259 	scsi_done(cmnd);
260 	return 0;
261 }
262 
263 static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
264 			  unsigned direction)
265 {
266 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
267 	int err;
268 
269 	cmdinfo->state |= direction | SUBMIT_STATUS_URB;
270 	err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
271 	if (err) {
272 		uas_add_work(cmdinfo);
273 	}
274 }
275 
276 static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd)
277 {
278 	u8 response_code = riu->response_code;
279 
280 	switch (response_code) {
281 	case RC_INCORRECT_LUN:
282 		set_host_byte(cmnd, DID_BAD_TARGET);
283 		break;
284 	case RC_TMF_SUCCEEDED:
285 		set_host_byte(cmnd, DID_OK);
286 		break;
287 	case RC_TMF_NOT_SUPPORTED:
288 		set_host_byte(cmnd, DID_TARGET_FAILURE);
289 		break;
290 	default:
291 		uas_log_cmd_state(cmnd, "response iu", response_code);
292 		set_host_byte(cmnd, DID_ERROR);
293 		break;
294 	}
295 
296 	return response_code == RC_TMF_SUCCEEDED;
297 }
298 
299 static void uas_stat_cmplt(struct urb *urb)
300 {
301 	struct iu *iu = urb->transfer_buffer;
302 	struct Scsi_Host *shost = urb->context;
303 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
304 	struct urb *data_in_urb = NULL;
305 	struct urb *data_out_urb = NULL;
306 	struct scsi_cmnd *cmnd;
307 	struct uas_cmd_info *cmdinfo;
308 	unsigned long flags;
309 	unsigned int idx;
310 	int status = urb->status;
311 	bool success;
312 
313 	spin_lock_irqsave(&devinfo->lock, flags);
314 
315 	if (devinfo->resetting)
316 		goto out;
317 
318 	if (status) {
319 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
320 			dev_err(&urb->dev->dev, "stat urb: status %d\n", status);
321 		goto out;
322 	}
323 
324 	idx = be16_to_cpup(&iu->tag) - 1;
325 	if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
326 		dev_err(&urb->dev->dev,
327 			"stat urb: no pending cmd for uas-tag %d\n", idx + 1);
328 		goto out;
329 	}
330 
331 	cmnd = devinfo->cmnd[idx];
332 	cmdinfo = (void *)&cmnd->SCp;
333 
334 	if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
335 		uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
336 		goto out;
337 	}
338 
339 	switch (iu->iu_id) {
340 	case IU_ID_STATUS:
341 		uas_sense(urb, cmnd);
342 		if (cmnd->result != 0) {
343 			/* cancel data transfers on error */
344 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
345 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
346 		}
347 		cmdinfo->state &= ~COMMAND_INFLIGHT;
348 		uas_try_complete(cmnd, __func__);
349 		break;
350 	case IU_ID_READ_READY:
351 		if (!cmdinfo->data_in_urb ||
352 				(cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
353 			uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
354 			break;
355 		}
356 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
357 		break;
358 	case IU_ID_WRITE_READY:
359 		if (!cmdinfo->data_out_urb ||
360 				(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
361 			uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
362 			break;
363 		}
364 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
365 		break;
366 	case IU_ID_RESPONSE:
367 		cmdinfo->state &= ~COMMAND_INFLIGHT;
368 		success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd);
369 		if (!success) {
370 			/* Error, cancel data transfers */
371 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
372 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
373 		}
374 		uas_try_complete(cmnd, __func__);
375 		break;
376 	default:
377 		uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
378 	}
379 out:
380 	usb_free_urb(urb);
381 	spin_unlock_irqrestore(&devinfo->lock, flags);
382 
383 	/* Unlinking of data urbs must be done without holding the lock */
384 	if (data_in_urb) {
385 		usb_unlink_urb(data_in_urb);
386 		usb_put_urb(data_in_urb);
387 	}
388 	if (data_out_urb) {
389 		usb_unlink_urb(data_out_urb);
390 		usb_put_urb(data_out_urb);
391 	}
392 }
393 
394 static void uas_data_cmplt(struct urb *urb)
395 {
396 	struct scsi_cmnd *cmnd = urb->context;
397 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
398 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
399 	struct scsi_data_buffer *sdb = &cmnd->sdb;
400 	unsigned long flags;
401 	int status = urb->status;
402 
403 	spin_lock_irqsave(&devinfo->lock, flags);
404 
405 	if (cmdinfo->data_in_urb == urb) {
406 		cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
407 		cmdinfo->data_in_urb = NULL;
408 	} else if (cmdinfo->data_out_urb == urb) {
409 		cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
410 		cmdinfo->data_out_urb = NULL;
411 	}
412 
413 	if (devinfo->resetting)
414 		goto out;
415 
416 	/* Data urbs should not complete before the cmd urb is submitted */
417 	if (cmdinfo->state & SUBMIT_CMD_URB) {
418 		uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
419 		goto out;
420 	}
421 
422 	if (status) {
423 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
424 			uas_log_cmd_state(cmnd, "data cmplt err", status);
425 		/* error: no data transfered */
426 		scsi_set_resid(cmnd, sdb->length);
427 	} else {
428 		scsi_set_resid(cmnd, sdb->length - urb->actual_length);
429 	}
430 	uas_try_complete(cmnd, __func__);
431 out:
432 	usb_free_urb(urb);
433 	spin_unlock_irqrestore(&devinfo->lock, flags);
434 }
435 
436 static void uas_cmd_cmplt(struct urb *urb)
437 {
438 	if (urb->status)
439 		dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
440 
441 	usb_free_urb(urb);
442 }
443 
444 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
445 				      struct scsi_cmnd *cmnd,
446 				      enum dma_data_direction dir)
447 {
448 	struct usb_device *udev = devinfo->udev;
449 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
450 	struct urb *urb = usb_alloc_urb(0, gfp);
451 	struct scsi_data_buffer *sdb = &cmnd->sdb;
452 	unsigned int pipe = (dir == DMA_FROM_DEVICE)
453 		? devinfo->data_in_pipe : devinfo->data_out_pipe;
454 
455 	if (!urb)
456 		goto out;
457 	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
458 			  uas_data_cmplt, cmnd);
459 	if (devinfo->use_streams)
460 		urb->stream_id = cmdinfo->uas_tag;
461 	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
462 	urb->sg = sdb->table.sgl;
463  out:
464 	return urb;
465 }
466 
467 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
468 				       struct scsi_cmnd *cmnd)
469 {
470 	struct usb_device *udev = devinfo->udev;
471 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
472 	struct urb *urb = usb_alloc_urb(0, gfp);
473 	struct sense_iu *iu;
474 
475 	if (!urb)
476 		goto out;
477 
478 	iu = kzalloc(sizeof(*iu), gfp);
479 	if (!iu)
480 		goto free;
481 
482 	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
483 			  uas_stat_cmplt, cmnd->device->host);
484 	if (devinfo->use_streams)
485 		urb->stream_id = cmdinfo->uas_tag;
486 	urb->transfer_flags |= URB_FREE_BUFFER;
487  out:
488 	return urb;
489  free:
490 	usb_free_urb(urb);
491 	return NULL;
492 }
493 
494 static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
495 					struct scsi_cmnd *cmnd)
496 {
497 	struct usb_device *udev = devinfo->udev;
498 	struct scsi_device *sdev = cmnd->device;
499 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
500 	struct urb *urb = usb_alloc_urb(0, gfp);
501 	struct command_iu *iu;
502 	int len;
503 
504 	if (!urb)
505 		goto out;
506 
507 	len = cmnd->cmd_len - 16;
508 	if (len < 0)
509 		len = 0;
510 	len = ALIGN(len, 4);
511 	iu = kzalloc(sizeof(*iu) + len, gfp);
512 	if (!iu)
513 		goto free;
514 
515 	iu->iu_id = IU_ID_COMMAND;
516 	iu->tag = cpu_to_be16(cmdinfo->uas_tag);
517 	iu->prio_attr = UAS_SIMPLE_TAG;
518 	iu->len = len;
519 	int_to_scsilun(sdev->lun, &iu->lun);
520 	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
521 
522 	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
523 							uas_cmd_cmplt, NULL);
524 	urb->transfer_flags |= URB_FREE_BUFFER;
525  out:
526 	return urb;
527  free:
528 	usb_free_urb(urb);
529 	return NULL;
530 }
531 
532 /*
533  * Why should I request the Status IU before sending the Command IU?  Spec
534  * says to, but also says the device may receive them in any order.  Seems
535  * daft to me.
536  */
537 
538 static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
539 {
540 	struct uas_dev_info *devinfo = cmnd->device->hostdata;
541 	struct urb *urb;
542 	int err;
543 
544 	urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
545 	if (!urb)
546 		return NULL;
547 	usb_anchor_urb(urb, &devinfo->sense_urbs);
548 	err = usb_submit_urb(urb, gfp);
549 	if (err) {
550 		usb_unanchor_urb(urb);
551 		uas_log_cmd_state(cmnd, "sense submit err", err);
552 		usb_free_urb(urb);
553 		return NULL;
554 	}
555 	return urb;
556 }
557 
558 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
559 			   struct uas_dev_info *devinfo)
560 {
561 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
562 	struct urb *urb;
563 	int err;
564 
565 	lockdep_assert_held(&devinfo->lock);
566 	if (cmdinfo->state & SUBMIT_STATUS_URB) {
567 		urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
568 		if (!urb)
569 			return SCSI_MLQUEUE_DEVICE_BUSY;
570 		cmdinfo->state &= ~SUBMIT_STATUS_URB;
571 	}
572 
573 	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
574 		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
575 							cmnd, DMA_FROM_DEVICE);
576 		if (!cmdinfo->data_in_urb)
577 			return SCSI_MLQUEUE_DEVICE_BUSY;
578 		cmdinfo->state &= ~ALLOC_DATA_IN_URB;
579 	}
580 
581 	if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
582 		usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
583 		err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC);
584 		if (err) {
585 			usb_unanchor_urb(cmdinfo->data_in_urb);
586 			uas_log_cmd_state(cmnd, "data in submit err", err);
587 			return SCSI_MLQUEUE_DEVICE_BUSY;
588 		}
589 		cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
590 		cmdinfo->state |= DATA_IN_URB_INFLIGHT;
591 	}
592 
593 	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
594 		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
595 							cmnd, DMA_TO_DEVICE);
596 		if (!cmdinfo->data_out_urb)
597 			return SCSI_MLQUEUE_DEVICE_BUSY;
598 		cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
599 	}
600 
601 	if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
602 		usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
603 		err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC);
604 		if (err) {
605 			usb_unanchor_urb(cmdinfo->data_out_urb);
606 			uas_log_cmd_state(cmnd, "data out submit err", err);
607 			return SCSI_MLQUEUE_DEVICE_BUSY;
608 		}
609 		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
610 		cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
611 	}
612 
613 	if (cmdinfo->state & ALLOC_CMD_URB) {
614 		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
615 		if (!cmdinfo->cmd_urb)
616 			return SCSI_MLQUEUE_DEVICE_BUSY;
617 		cmdinfo->state &= ~ALLOC_CMD_URB;
618 	}
619 
620 	if (cmdinfo->state & SUBMIT_CMD_URB) {
621 		usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
622 		err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC);
623 		if (err) {
624 			usb_unanchor_urb(cmdinfo->cmd_urb);
625 			uas_log_cmd_state(cmnd, "cmd submit err", err);
626 			return SCSI_MLQUEUE_DEVICE_BUSY;
627 		}
628 		cmdinfo->cmd_urb = NULL;
629 		cmdinfo->state &= ~SUBMIT_CMD_URB;
630 		cmdinfo->state |= COMMAND_INFLIGHT;
631 	}
632 
633 	return 0;
634 }
635 
636 static int uas_queuecommand_lck(struct scsi_cmnd *cmnd)
637 {
638 	struct scsi_device *sdev = cmnd->device;
639 	struct uas_dev_info *devinfo = sdev->hostdata;
640 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
641 	unsigned long flags;
642 	int idx, err;
643 
644 	BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
645 
646 	/* Re-check scsi_block_requests now that we've the host-lock */
647 	if (cmnd->device->host->host_self_blocked)
648 		return SCSI_MLQUEUE_DEVICE_BUSY;
649 
650 	if ((devinfo->flags & US_FL_NO_ATA_1X) &&
651 			(cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
652 		memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
653 		       sizeof(usb_stor_sense_invalidCDB));
654 		cmnd->result = SAM_STAT_CHECK_CONDITION;
655 		scsi_done(cmnd);
656 		return 0;
657 	}
658 
659 	spin_lock_irqsave(&devinfo->lock, flags);
660 
661 	if (devinfo->resetting) {
662 		set_host_byte(cmnd, DID_ERROR);
663 		scsi_done(cmnd);
664 		goto zombie;
665 	}
666 
667 	/* Find a free uas-tag */
668 	for (idx = 0; idx < devinfo->qdepth; idx++) {
669 		if (!devinfo->cmnd[idx])
670 			break;
671 	}
672 	if (idx == devinfo->qdepth) {
673 		spin_unlock_irqrestore(&devinfo->lock, flags);
674 		return SCSI_MLQUEUE_DEVICE_BUSY;
675 	}
676 
677 	memset(cmdinfo, 0, sizeof(*cmdinfo));
678 	cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */
679 	cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
680 
681 	switch (cmnd->sc_data_direction) {
682 	case DMA_FROM_DEVICE:
683 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
684 		break;
685 	case DMA_BIDIRECTIONAL:
686 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
687 		fallthrough;
688 	case DMA_TO_DEVICE:
689 		cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
690 		break;
691 	case DMA_NONE:
692 		break;
693 	}
694 
695 	if (!devinfo->use_streams)
696 		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
697 
698 	err = uas_submit_urbs(cmnd, devinfo);
699 	/*
700 	 * in case of fatal errors the SCSI layer is peculiar
701 	 * a command that has finished is a success for the purpose
702 	 * of queueing, no matter how fatal the error
703 	 */
704 	if (err == -ENODEV) {
705 		set_host_byte(cmnd, DID_ERROR);
706 		scsi_done(cmnd);
707 		goto zombie;
708 	}
709 	if (err) {
710 		/* If we did nothing, give up now */
711 		if (cmdinfo->state & SUBMIT_STATUS_URB) {
712 			spin_unlock_irqrestore(&devinfo->lock, flags);
713 			return SCSI_MLQUEUE_DEVICE_BUSY;
714 		}
715 		uas_add_work(cmdinfo);
716 	}
717 
718 	devinfo->cmnd[idx] = cmnd;
719 zombie:
720 	spin_unlock_irqrestore(&devinfo->lock, flags);
721 	return 0;
722 }
723 
724 static DEF_SCSI_QCMD(uas_queuecommand)
725 
726 /*
727  * For now we do not support actually sending an abort to the device, so
728  * this eh always fails. Still we must define it to make sure that we've
729  * dropped all references to the cmnd in question once this function exits.
730  */
731 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
732 {
733 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
734 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
735 	struct urb *data_in_urb = NULL;
736 	struct urb *data_out_urb = NULL;
737 	unsigned long flags;
738 
739 	spin_lock_irqsave(&devinfo->lock, flags);
740 
741 	uas_log_cmd_state(cmnd, __func__, 0);
742 
743 	/* Ensure that try_complete does not call scsi_done */
744 	cmdinfo->state |= COMMAND_ABORTED;
745 
746 	/* Drop all refs to this cmnd, kill data urbs to break their ref */
747 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
748 	if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
749 		data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
750 	if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
751 		data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
752 
753 	uas_free_unsubmitted_urbs(cmnd);
754 
755 	spin_unlock_irqrestore(&devinfo->lock, flags);
756 
757 	if (data_in_urb) {
758 		usb_kill_urb(data_in_urb);
759 		usb_put_urb(data_in_urb);
760 	}
761 	if (data_out_urb) {
762 		usb_kill_urb(data_out_urb);
763 		usb_put_urb(data_out_urb);
764 	}
765 
766 	return FAILED;
767 }
768 
769 static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
770 {
771 	struct scsi_device *sdev = cmnd->device;
772 	struct uas_dev_info *devinfo = sdev->hostdata;
773 	struct usb_device *udev = devinfo->udev;
774 	unsigned long flags;
775 	int err;
776 
777 	err = usb_lock_device_for_reset(udev, devinfo->intf);
778 	if (err) {
779 		shost_printk(KERN_ERR, sdev->host,
780 			     "%s FAILED to get lock err %d\n", __func__, err);
781 		return FAILED;
782 	}
783 
784 	shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
785 
786 	spin_lock_irqsave(&devinfo->lock, flags);
787 	devinfo->resetting = 1;
788 	spin_unlock_irqrestore(&devinfo->lock, flags);
789 
790 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
791 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
792 	usb_kill_anchored_urbs(&devinfo->data_urbs);
793 	uas_zap_pending(devinfo, DID_RESET);
794 
795 	err = usb_reset_device(udev);
796 
797 	spin_lock_irqsave(&devinfo->lock, flags);
798 	devinfo->resetting = 0;
799 	spin_unlock_irqrestore(&devinfo->lock, flags);
800 
801 	usb_unlock_device(udev);
802 
803 	if (err) {
804 		shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
805 			     __func__, err);
806 		return FAILED;
807 	}
808 
809 	shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
810 	return SUCCESS;
811 }
812 
813 static int uas_target_alloc(struct scsi_target *starget)
814 {
815 	struct uas_dev_info *devinfo = (struct uas_dev_info *)
816 			dev_to_shost(starget->dev.parent)->hostdata;
817 
818 	if (devinfo->flags & US_FL_NO_REPORT_LUNS)
819 		starget->no_report_luns = 1;
820 
821 	return 0;
822 }
823 
824 static int uas_slave_alloc(struct scsi_device *sdev)
825 {
826 	struct uas_dev_info *devinfo =
827 		(struct uas_dev_info *)sdev->host->hostdata;
828 
829 	sdev->hostdata = devinfo;
830 
831 	/*
832 	 * The protocol has no requirements on alignment in the strict sense.
833 	 * Controllers may or may not have alignment restrictions.
834 	 * As this is not exported, we use an extremely conservative guess.
835 	 */
836 	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
837 
838 	if (devinfo->flags & US_FL_MAX_SECTORS_64)
839 		blk_queue_max_hw_sectors(sdev->request_queue, 64);
840 	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
841 		blk_queue_max_hw_sectors(sdev->request_queue, 240);
842 
843 	return 0;
844 }
845 
846 static int uas_slave_configure(struct scsi_device *sdev)
847 {
848 	struct uas_dev_info *devinfo = sdev->hostdata;
849 
850 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
851 		sdev->no_report_opcodes = 1;
852 
853 	/* A few buggy USB-ATA bridges don't understand FUA */
854 	if (devinfo->flags & US_FL_BROKEN_FUA)
855 		sdev->broken_fua = 1;
856 
857 	/* UAS also needs to support FL_ALWAYS_SYNC */
858 	if (devinfo->flags & US_FL_ALWAYS_SYNC) {
859 		sdev->skip_ms_page_3f = 1;
860 		sdev->skip_ms_page_8 = 1;
861 		sdev->wce_default_on = 1;
862 	}
863 
864 	/* Some disks cannot handle READ_CAPACITY_16 */
865 	if (devinfo->flags & US_FL_NO_READ_CAPACITY_16)
866 		sdev->no_read_capacity_16 = 1;
867 
868 	/* Some disks cannot handle WRITE_SAME */
869 	if (devinfo->flags & US_FL_NO_SAME)
870 		sdev->no_write_same = 1;
871 	/*
872 	 * Some disks return the total number of blocks in response
873 	 * to READ CAPACITY rather than the highest block number.
874 	 * If this device makes that mistake, tell the sd driver.
875 	 */
876 	if (devinfo->flags & US_FL_FIX_CAPACITY)
877 		sdev->fix_capacity = 1;
878 
879 	/*
880 	 * in some cases we have to guess
881 	 */
882 	if (devinfo->flags & US_FL_CAPACITY_HEURISTICS)
883 		sdev->guess_capacity = 1;
884 
885 	/*
886 	 * Some devices don't like MODE SENSE with page=0x3f,
887 	 * which is the command used for checking if a device
888 	 * is write-protected.  Now that we tell the sd driver
889 	 * to do a 192-byte transfer with this command the
890 	 * majority of devices work fine, but a few still can't
891 	 * handle it.  The sd driver will simply assume those
892 	 * devices are write-enabled.
893 	 */
894 	if (devinfo->flags & US_FL_NO_WP_DETECT)
895 		sdev->skip_ms_page_3f = 1;
896 
897 	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
898 	return 0;
899 }
900 
901 static struct scsi_host_template uas_host_template = {
902 	.module = THIS_MODULE,
903 	.name = "uas",
904 	.queuecommand = uas_queuecommand,
905 	.target_alloc = uas_target_alloc,
906 	.slave_alloc = uas_slave_alloc,
907 	.slave_configure = uas_slave_configure,
908 	.eh_abort_handler = uas_eh_abort_handler,
909 	.eh_device_reset_handler = uas_eh_device_reset_handler,
910 	.this_id = -1,
911 	.skip_settle_delay = 1,
912 	.dma_boundary = PAGE_SIZE - 1,
913 };
914 
915 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
916 		    vendorName, productName, useProtocol, useTransport, \
917 		    initFunction, flags) \
918 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
919 	.driver_info = (flags) }
920 
921 static struct usb_device_id uas_usb_ids[] = {
922 #	include "unusual_uas.h"
923 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
924 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
925 	{ }
926 };
927 MODULE_DEVICE_TABLE(usb, uas_usb_ids);
928 
929 #undef UNUSUAL_DEV
930 
931 static int uas_switch_interface(struct usb_device *udev,
932 				struct usb_interface *intf)
933 {
934 	struct usb_host_interface *alt;
935 
936 	alt = uas_find_uas_alt_setting(intf);
937 	if (!alt)
938 		return -ENODEV;
939 
940 	return usb_set_interface(udev, alt->desc.bInterfaceNumber,
941 			alt->desc.bAlternateSetting);
942 }
943 
944 static int uas_configure_endpoints(struct uas_dev_info *devinfo)
945 {
946 	struct usb_host_endpoint *eps[4] = { };
947 	struct usb_device *udev = devinfo->udev;
948 	int r;
949 
950 	r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
951 	if (r)
952 		return r;
953 
954 	devinfo->cmd_pipe = usb_sndbulkpipe(udev,
955 					    usb_endpoint_num(&eps[0]->desc));
956 	devinfo->status_pipe = usb_rcvbulkpipe(udev,
957 					    usb_endpoint_num(&eps[1]->desc));
958 	devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
959 					    usb_endpoint_num(&eps[2]->desc));
960 	devinfo->data_out_pipe = usb_sndbulkpipe(udev,
961 					    usb_endpoint_num(&eps[3]->desc));
962 
963 	if (udev->speed < USB_SPEED_SUPER) {
964 		devinfo->qdepth = 32;
965 		devinfo->use_streams = 0;
966 	} else {
967 		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
968 						    3, MAX_CMNDS, GFP_NOIO);
969 		if (devinfo->qdepth < 0)
970 			return devinfo->qdepth;
971 		devinfo->use_streams = 1;
972 	}
973 
974 	return 0;
975 }
976 
977 static void uas_free_streams(struct uas_dev_info *devinfo)
978 {
979 	struct usb_device *udev = devinfo->udev;
980 	struct usb_host_endpoint *eps[3];
981 
982 	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
983 	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
984 	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
985 	usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
986 }
987 
988 static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
989 {
990 	int result = -ENOMEM;
991 	struct Scsi_Host *shost = NULL;
992 	struct uas_dev_info *devinfo;
993 	struct usb_device *udev = interface_to_usbdev(intf);
994 	unsigned long dev_flags;
995 
996 	if (!uas_use_uas_driver(intf, id, &dev_flags))
997 		return -ENODEV;
998 
999 	if (uas_switch_interface(udev, intf))
1000 		return -ENODEV;
1001 
1002 	shost = scsi_host_alloc(&uas_host_template,
1003 				sizeof(struct uas_dev_info));
1004 	if (!shost)
1005 		goto set_alt0;
1006 
1007 	shost->max_cmd_len = 16 + 252;
1008 	shost->max_id = 1;
1009 	shost->max_lun = 256;
1010 	shost->max_channel = 0;
1011 	shost->sg_tablesize = udev->bus->sg_tablesize;
1012 
1013 	devinfo = (struct uas_dev_info *)shost->hostdata;
1014 	devinfo->intf = intf;
1015 	devinfo->udev = udev;
1016 	devinfo->resetting = 0;
1017 	devinfo->shutdown = 0;
1018 	devinfo->flags = dev_flags;
1019 	init_usb_anchor(&devinfo->cmd_urbs);
1020 	init_usb_anchor(&devinfo->sense_urbs);
1021 	init_usb_anchor(&devinfo->data_urbs);
1022 	spin_lock_init(&devinfo->lock);
1023 	INIT_WORK(&devinfo->work, uas_do_work);
1024 	INIT_WORK(&devinfo->scan_work, uas_scan_work);
1025 
1026 	result = uas_configure_endpoints(devinfo);
1027 	if (result)
1028 		goto set_alt0;
1029 
1030 	/*
1031 	 * 1 tag is reserved for untagged commands +
1032 	 * 1 tag to avoid off by one errors in some bridge firmwares
1033 	 */
1034 	shost->can_queue = devinfo->qdepth - 2;
1035 
1036 	usb_set_intfdata(intf, shost);
1037 	result = scsi_add_host(shost, &intf->dev);
1038 	if (result)
1039 		goto free_streams;
1040 
1041 	/* Submit the delayed_work for SCSI-device scanning */
1042 	schedule_work(&devinfo->scan_work);
1043 
1044 	return result;
1045 
1046 free_streams:
1047 	uas_free_streams(devinfo);
1048 	usb_set_intfdata(intf, NULL);
1049 set_alt0:
1050 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1051 	if (shost)
1052 		scsi_host_put(shost);
1053 	return result;
1054 }
1055 
1056 static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
1057 {
1058 	unsigned long flags;
1059 	int i, r = 1;
1060 
1061 	spin_lock_irqsave(&devinfo->lock, flags);
1062 
1063 	for (i = 0; i < devinfo->qdepth; i++) {
1064 		if (devinfo->cmnd[i]) {
1065 			r = 0; /* Not empty */
1066 			break;
1067 		}
1068 	}
1069 
1070 	spin_unlock_irqrestore(&devinfo->lock, flags);
1071 
1072 	return r;
1073 }
1074 
1075 /*
1076  * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
1077  * get empty while there still is more work to do due to sense-urbs completing
1078  * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
1079  */
1080 static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
1081 {
1082 	unsigned long start_time;
1083 	int r;
1084 
1085 	start_time = jiffies;
1086 	do {
1087 		flush_work(&devinfo->work);
1088 
1089 		r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
1090 		if (r == 0)
1091 			return -ETIME;
1092 
1093 		r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
1094 		if (r == 0)
1095 			return -ETIME;
1096 
1097 		if (time_after(jiffies, start_time + 5 * HZ))
1098 			return -ETIME;
1099 	} while (!uas_cmnd_list_empty(devinfo));
1100 
1101 	return 0;
1102 }
1103 
1104 static int uas_pre_reset(struct usb_interface *intf)
1105 {
1106 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1107 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1108 	unsigned long flags;
1109 
1110 	if (devinfo->shutdown)
1111 		return 0;
1112 
1113 	/* Block new requests */
1114 	spin_lock_irqsave(shost->host_lock, flags);
1115 	scsi_block_requests(shost);
1116 	spin_unlock_irqrestore(shost->host_lock, flags);
1117 
1118 	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1119 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1120 		scsi_unblock_requests(shost);
1121 		return 1;
1122 	}
1123 
1124 	uas_free_streams(devinfo);
1125 
1126 	return 0;
1127 }
1128 
1129 static int uas_post_reset(struct usb_interface *intf)
1130 {
1131 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1132 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1133 	unsigned long flags;
1134 	int err;
1135 
1136 	if (devinfo->shutdown)
1137 		return 0;
1138 
1139 	err = uas_configure_endpoints(devinfo);
1140 	if (err && err != -ENODEV)
1141 		shost_printk(KERN_ERR, shost,
1142 			     "%s: alloc streams error %d after reset",
1143 			     __func__, err);
1144 
1145 	/* we must unblock the host in every case lest we deadlock */
1146 	spin_lock_irqsave(shost->host_lock, flags);
1147 	scsi_report_bus_reset(shost, 0);
1148 	spin_unlock_irqrestore(shost->host_lock, flags);
1149 
1150 	scsi_unblock_requests(shost);
1151 
1152 	return err ? 1 : 0;
1153 }
1154 
1155 static int uas_suspend(struct usb_interface *intf, pm_message_t message)
1156 {
1157 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1158 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1159 
1160 	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1161 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1162 		return -ETIME;
1163 	}
1164 
1165 	return 0;
1166 }
1167 
1168 static int uas_resume(struct usb_interface *intf)
1169 {
1170 	return 0;
1171 }
1172 
1173 static int uas_reset_resume(struct usb_interface *intf)
1174 {
1175 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1176 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1177 	unsigned long flags;
1178 	int err;
1179 
1180 	err = uas_configure_endpoints(devinfo);
1181 	if (err) {
1182 		shost_printk(KERN_ERR, shost,
1183 			     "%s: alloc streams error %d after reset",
1184 			     __func__, err);
1185 		return -EIO;
1186 	}
1187 
1188 	spin_lock_irqsave(shost->host_lock, flags);
1189 	scsi_report_bus_reset(shost, 0);
1190 	spin_unlock_irqrestore(shost->host_lock, flags);
1191 
1192 	return 0;
1193 }
1194 
1195 static void uas_disconnect(struct usb_interface *intf)
1196 {
1197 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1198 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1199 	unsigned long flags;
1200 
1201 	spin_lock_irqsave(&devinfo->lock, flags);
1202 	devinfo->resetting = 1;
1203 	spin_unlock_irqrestore(&devinfo->lock, flags);
1204 
1205 	cancel_work_sync(&devinfo->work);
1206 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
1207 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
1208 	usb_kill_anchored_urbs(&devinfo->data_urbs);
1209 	uas_zap_pending(devinfo, DID_NO_CONNECT);
1210 
1211 	/*
1212 	 * Prevent SCSI scanning (if it hasn't started yet)
1213 	 * or wait for the SCSI-scanning routine to stop.
1214 	 */
1215 	cancel_work_sync(&devinfo->scan_work);
1216 
1217 	scsi_remove_host(shost);
1218 	uas_free_streams(devinfo);
1219 	scsi_host_put(shost);
1220 }
1221 
1222 /*
1223  * Put the device back in usb-storage mode on shutdown, as some BIOS-es
1224  * hang on reboot when the device is still in uas mode. Note the reset is
1225  * necessary as some devices won't revert to usb-storage mode without it.
1226  */
1227 static void uas_shutdown(struct device *dev)
1228 {
1229 	struct usb_interface *intf = to_usb_interface(dev);
1230 	struct usb_device *udev = interface_to_usbdev(intf);
1231 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1232 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1233 
1234 	if (system_state != SYSTEM_RESTART)
1235 		return;
1236 
1237 	devinfo->shutdown = 1;
1238 	uas_free_streams(devinfo);
1239 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1240 	usb_reset_device(udev);
1241 }
1242 
1243 static struct usb_driver uas_driver = {
1244 	.name = "uas",
1245 	.probe = uas_probe,
1246 	.disconnect = uas_disconnect,
1247 	.pre_reset = uas_pre_reset,
1248 	.post_reset = uas_post_reset,
1249 	.suspend = uas_suspend,
1250 	.resume = uas_resume,
1251 	.reset_resume = uas_reset_resume,
1252 	.drvwrap.driver.shutdown = uas_shutdown,
1253 	.id_table = uas_usb_ids,
1254 };
1255 
1256 static int __init uas_init(void)
1257 {
1258 	int rv;
1259 
1260 	workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
1261 	if (!workqueue)
1262 		return -ENOMEM;
1263 
1264 	rv = usb_register(&uas_driver);
1265 	if (rv) {
1266 		destroy_workqueue(workqueue);
1267 		return -ENOMEM;
1268 	}
1269 
1270 	return 0;
1271 }
1272 
1273 static void __exit uas_exit(void)
1274 {
1275 	usb_deregister(&uas_driver);
1276 	destroy_workqueue(workqueue);
1277 }
1278 
1279 module_init(uas_init);
1280 module_exit(uas_exit);
1281 
1282 MODULE_LICENSE("GPL");
1283 MODULE_IMPORT_NS(USB_STORAGE);
1284 MODULE_AUTHOR(
1285 	"Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");
1286