1 /* Driver for Lexar "Jumpshot" Compact Flash reader 2 * 3 * jumpshot driver v0.1: 4 * 5 * First release 6 * 7 * Current development and maintenance by: 8 * (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org) 9 * 10 * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver 11 * which I used as a template for this driver. 12 * 13 * Some bugfixes and scatter-gather code by Gregory P. Smith 14 * (greg-usb@electricrain.com) 15 * 16 * Fix for media change by Joerg Schneider (js@joergschneider.com) 17 * 18 * Developed with the assistance of: 19 * 20 * (C) 2002 Alan Stern <stern@rowland.org> 21 * 22 * This program is free software; you can redistribute it and/or modify it 23 * under the terms of the GNU General Public License as published by the 24 * Free Software Foundation; either version 2, or (at your option) any 25 * later version. 26 * 27 * This program is distributed in the hope that it will be useful, but 28 * WITHOUT ANY WARRANTY; without even the implied warranty of 29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 30 * General Public License for more details. 31 * 32 * You should have received a copy of the GNU General Public License along 33 * with this program; if not, write to the Free Software Foundation, Inc., 34 * 675 Mass Ave, Cambridge, MA 02139, USA. 35 */ 36 37 /* 38 * This driver attempts to support the Lexar Jumpshot USB CompactFlash 39 * reader. Like many other USB CompactFlash readers, the Jumpshot contains 40 * a USB-to-ATA chip. 41 * 42 * This driver supports reading and writing. If you're truly paranoid, 43 * however, you can force the driver into a write-protected state by setting 44 * the WP enable bits in jumpshot_handle_mode_sense. See the comments 45 * in that routine. 46 */ 47 48 #include <linux/errno.h> 49 #include <linux/module.h> 50 #include <linux/slab.h> 51 52 #include <scsi/scsi.h> 53 #include <scsi/scsi_cmnd.h> 54 55 #include "usb.h" 56 #include "transport.h" 57 #include "protocol.h" 58 #include "debug.h" 59 60 61 MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader"); 62 MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>"); 63 MODULE_LICENSE("GPL"); 64 65 /* 66 * The table of devices 67 */ 68 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ 69 vendorName, productName, useProtocol, useTransport, \ 70 initFunction, flags) \ 71 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ 72 .driver_info = (flags) } 73 74 static struct usb_device_id jumpshot_usb_ids[] = { 75 # include "unusual_jumpshot.h" 76 { } /* Terminating entry */ 77 }; 78 MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids); 79 80 #undef UNUSUAL_DEV 81 82 /* 83 * The flags table 84 */ 85 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ 86 vendor_name, product_name, use_protocol, use_transport, \ 87 init_function, Flags) \ 88 { \ 89 .vendorName = vendor_name, \ 90 .productName = product_name, \ 91 .useProtocol = use_protocol, \ 92 .useTransport = use_transport, \ 93 .initFunction = init_function, \ 94 } 95 96 static struct us_unusual_dev jumpshot_unusual_dev_list[] = { 97 # include "unusual_jumpshot.h" 98 { } /* Terminating entry */ 99 }; 100 101 #undef UNUSUAL_DEV 102 103 104 struct jumpshot_info { 105 unsigned long sectors; /* total sector count */ 106 unsigned long ssize; /* sector size in bytes */ 107 108 /* the following aren't used yet */ 109 unsigned char sense_key; 110 unsigned long sense_asc; /* additional sense code */ 111 unsigned long sense_ascq; /* additional sense code qualifier */ 112 }; 113 114 static inline int jumpshot_bulk_read(struct us_data *us, 115 unsigned char *data, 116 unsigned int len) 117 { 118 if (len == 0) 119 return USB_STOR_XFER_GOOD; 120 121 usb_stor_dbg(us, "len = %d\n", len); 122 return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, 123 data, len, NULL); 124 } 125 126 127 static inline int jumpshot_bulk_write(struct us_data *us, 128 unsigned char *data, 129 unsigned int len) 130 { 131 if (len == 0) 132 return USB_STOR_XFER_GOOD; 133 134 usb_stor_dbg(us, "len = %d\n", len); 135 return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, 136 data, len, NULL); 137 } 138 139 140 static int jumpshot_get_status(struct us_data *us) 141 { 142 int rc; 143 144 if (!us) 145 return USB_STOR_TRANSPORT_ERROR; 146 147 // send the setup 148 rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, 149 0, 0xA0, 0, 7, us->iobuf, 1); 150 151 if (rc != USB_STOR_XFER_GOOD) 152 return USB_STOR_TRANSPORT_ERROR; 153 154 if (us->iobuf[0] != 0x50) { 155 usb_stor_dbg(us, "0x%2x\n", us->iobuf[0]); 156 return USB_STOR_TRANSPORT_ERROR; 157 } 158 159 return USB_STOR_TRANSPORT_GOOD; 160 } 161 162 static int jumpshot_read_data(struct us_data *us, 163 struct jumpshot_info *info, 164 u32 sector, 165 u32 sectors) 166 { 167 unsigned char *command = us->iobuf; 168 unsigned char *buffer; 169 unsigned char thistime; 170 unsigned int totallen, alloclen; 171 int len, result; 172 unsigned int sg_offset = 0; 173 struct scatterlist *sg = NULL; 174 175 // we're working in LBA mode. according to the ATA spec, 176 // we can support up to 28-bit addressing. I don't know if Jumpshot 177 // supports beyond 24-bit addressing. It's kind of hard to test 178 // since it requires > 8GB CF card. 179 180 if (sector > 0x0FFFFFFF) 181 return USB_STOR_TRANSPORT_ERROR; 182 183 totallen = sectors * info->ssize; 184 185 // Since we don't read more than 64 KB at a time, we have to create 186 // a bounce buffer and move the data a piece at a time between the 187 // bounce buffer and the actual transfer buffer. 188 189 alloclen = min(totallen, 65536u); 190 buffer = kmalloc(alloclen, GFP_NOIO); 191 if (buffer == NULL) 192 return USB_STOR_TRANSPORT_ERROR; 193 194 do { 195 // loop, never allocate or transfer more than 64k at once 196 // (min(128k, 255*info->ssize) is the real limit) 197 len = min(totallen, alloclen); 198 thistime = (len / info->ssize) & 0xff; 199 200 command[0] = 0; 201 command[1] = thistime; 202 command[2] = sector & 0xFF; 203 command[3] = (sector >> 8) & 0xFF; 204 command[4] = (sector >> 16) & 0xFF; 205 206 command[5] = 0xE0 | ((sector >> 24) & 0x0F); 207 command[6] = 0x20; 208 209 // send the setup + command 210 result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, 211 0, 0x20, 0, 1, command, 7); 212 if (result != USB_STOR_XFER_GOOD) 213 goto leave; 214 215 // read the result 216 result = jumpshot_bulk_read(us, buffer, len); 217 if (result != USB_STOR_XFER_GOOD) 218 goto leave; 219 220 usb_stor_dbg(us, "%d bytes\n", len); 221 222 // Store the data in the transfer buffer 223 usb_stor_access_xfer_buf(buffer, len, us->srb, 224 &sg, &sg_offset, TO_XFER_BUF); 225 226 sector += thistime; 227 totallen -= len; 228 } while (totallen > 0); 229 230 kfree(buffer); 231 return USB_STOR_TRANSPORT_GOOD; 232 233 leave: 234 kfree(buffer); 235 return USB_STOR_TRANSPORT_ERROR; 236 } 237 238 239 static int jumpshot_write_data(struct us_data *us, 240 struct jumpshot_info *info, 241 u32 sector, 242 u32 sectors) 243 { 244 unsigned char *command = us->iobuf; 245 unsigned char *buffer; 246 unsigned char thistime; 247 unsigned int totallen, alloclen; 248 int len, result, waitcount; 249 unsigned int sg_offset = 0; 250 struct scatterlist *sg = NULL; 251 252 // we're working in LBA mode. according to the ATA spec, 253 // we can support up to 28-bit addressing. I don't know if Jumpshot 254 // supports beyond 24-bit addressing. It's kind of hard to test 255 // since it requires > 8GB CF card. 256 // 257 if (sector > 0x0FFFFFFF) 258 return USB_STOR_TRANSPORT_ERROR; 259 260 totallen = sectors * info->ssize; 261 262 // Since we don't write more than 64 KB at a time, we have to create 263 // a bounce buffer and move the data a piece at a time between the 264 // bounce buffer and the actual transfer buffer. 265 266 alloclen = min(totallen, 65536u); 267 buffer = kmalloc(alloclen, GFP_NOIO); 268 if (buffer == NULL) 269 return USB_STOR_TRANSPORT_ERROR; 270 271 do { 272 // loop, never allocate or transfer more than 64k at once 273 // (min(128k, 255*info->ssize) is the real limit) 274 275 len = min(totallen, alloclen); 276 thistime = (len / info->ssize) & 0xff; 277 278 // Get the data from the transfer buffer 279 usb_stor_access_xfer_buf(buffer, len, us->srb, 280 &sg, &sg_offset, FROM_XFER_BUF); 281 282 command[0] = 0; 283 command[1] = thistime; 284 command[2] = sector & 0xFF; 285 command[3] = (sector >> 8) & 0xFF; 286 command[4] = (sector >> 16) & 0xFF; 287 288 command[5] = 0xE0 | ((sector >> 24) & 0x0F); 289 command[6] = 0x30; 290 291 // send the setup + command 292 result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, 293 0, 0x20, 0, 1, command, 7); 294 if (result != USB_STOR_XFER_GOOD) 295 goto leave; 296 297 // send the data 298 result = jumpshot_bulk_write(us, buffer, len); 299 if (result != USB_STOR_XFER_GOOD) 300 goto leave; 301 302 // read the result. apparently the bulk write can complete 303 // before the jumpshot drive is finished writing. so we loop 304 // here until we get a good return code 305 waitcount = 0; 306 do { 307 result = jumpshot_get_status(us); 308 if (result != USB_STOR_TRANSPORT_GOOD) { 309 // I have not experimented to find the smallest value. 310 // 311 msleep(50); 312 } 313 } while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10)); 314 315 if (result != USB_STOR_TRANSPORT_GOOD) 316 usb_stor_dbg(us, "Gah! Waitcount = 10. Bad write!?\n"); 317 318 sector += thistime; 319 totallen -= len; 320 } while (totallen > 0); 321 322 kfree(buffer); 323 return result; 324 325 leave: 326 kfree(buffer); 327 return USB_STOR_TRANSPORT_ERROR; 328 } 329 330 static int jumpshot_id_device(struct us_data *us, 331 struct jumpshot_info *info) 332 { 333 unsigned char *command = us->iobuf; 334 unsigned char *reply; 335 int rc; 336 337 if (!info) 338 return USB_STOR_TRANSPORT_ERROR; 339 340 command[0] = 0xE0; 341 command[1] = 0xEC; 342 reply = kmalloc(512, GFP_NOIO); 343 if (!reply) 344 return USB_STOR_TRANSPORT_ERROR; 345 346 // send the setup 347 rc = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, 348 0, 0x20, 0, 6, command, 2); 349 350 if (rc != USB_STOR_XFER_GOOD) { 351 usb_stor_dbg(us, "Gah! send_control for read_capacity failed\n"); 352 rc = USB_STOR_TRANSPORT_ERROR; 353 goto leave; 354 } 355 356 // read the reply 357 rc = jumpshot_bulk_read(us, reply, 512); 358 if (rc != USB_STOR_XFER_GOOD) { 359 rc = USB_STOR_TRANSPORT_ERROR; 360 goto leave; 361 } 362 363 info->sectors = ((u32)(reply[117]) << 24) | 364 ((u32)(reply[116]) << 16) | 365 ((u32)(reply[115]) << 8) | 366 ((u32)(reply[114]) ); 367 368 rc = USB_STOR_TRANSPORT_GOOD; 369 370 leave: 371 kfree(reply); 372 return rc; 373 } 374 375 static int jumpshot_handle_mode_sense(struct us_data *us, 376 struct scsi_cmnd * srb, 377 int sense_6) 378 { 379 static unsigned char rw_err_page[12] = { 380 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0 381 }; 382 static unsigned char cache_page[12] = { 383 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0 384 }; 385 static unsigned char rbac_page[12] = { 386 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0 387 }; 388 static unsigned char timer_page[8] = { 389 0x1C, 0x6, 0, 0, 0, 0 390 }; 391 unsigned char pc, page_code; 392 unsigned int i = 0; 393 struct jumpshot_info *info = (struct jumpshot_info *) (us->extra); 394 unsigned char *ptr = us->iobuf; 395 396 pc = srb->cmnd[2] >> 6; 397 page_code = srb->cmnd[2] & 0x3F; 398 399 switch (pc) { 400 case 0x0: 401 usb_stor_dbg(us, "Current values\n"); 402 break; 403 case 0x1: 404 usb_stor_dbg(us, "Changeable values\n"); 405 break; 406 case 0x2: 407 usb_stor_dbg(us, "Default values\n"); 408 break; 409 case 0x3: 410 usb_stor_dbg(us, "Saves values\n"); 411 break; 412 } 413 414 memset(ptr, 0, 8); 415 if (sense_6) { 416 ptr[2] = 0x00; // WP enable: 0x80 417 i = 4; 418 } else { 419 ptr[3] = 0x00; // WP enable: 0x80 420 i = 8; 421 } 422 423 switch (page_code) { 424 case 0x0: 425 // vendor-specific mode 426 info->sense_key = 0x05; 427 info->sense_asc = 0x24; 428 info->sense_ascq = 0x00; 429 return USB_STOR_TRANSPORT_FAILED; 430 431 case 0x1: 432 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); 433 i += sizeof(rw_err_page); 434 break; 435 436 case 0x8: 437 memcpy(ptr + i, cache_page, sizeof(cache_page)); 438 i += sizeof(cache_page); 439 break; 440 441 case 0x1B: 442 memcpy(ptr + i, rbac_page, sizeof(rbac_page)); 443 i += sizeof(rbac_page); 444 break; 445 446 case 0x1C: 447 memcpy(ptr + i, timer_page, sizeof(timer_page)); 448 i += sizeof(timer_page); 449 break; 450 451 case 0x3F: 452 memcpy(ptr + i, timer_page, sizeof(timer_page)); 453 i += sizeof(timer_page); 454 memcpy(ptr + i, rbac_page, sizeof(rbac_page)); 455 i += sizeof(rbac_page); 456 memcpy(ptr + i, cache_page, sizeof(cache_page)); 457 i += sizeof(cache_page); 458 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); 459 i += sizeof(rw_err_page); 460 break; 461 } 462 463 if (sense_6) 464 ptr[0] = i - 1; 465 else 466 ((__be16 *) ptr)[0] = cpu_to_be16(i - 2); 467 usb_stor_set_xfer_buf(ptr, i, srb); 468 469 return USB_STOR_TRANSPORT_GOOD; 470 } 471 472 473 static void jumpshot_info_destructor(void *extra) 474 { 475 // this routine is a placeholder... 476 // currently, we don't allocate any extra blocks so we're okay 477 } 478 479 480 481 // Transport for the Lexar 'Jumpshot' 482 // 483 static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) 484 { 485 struct jumpshot_info *info; 486 int rc; 487 unsigned long block, blocks; 488 unsigned char *ptr = us->iobuf; 489 static unsigned char inquiry_response[8] = { 490 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 491 }; 492 493 if (!us->extra) { 494 us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO); 495 if (!us->extra) 496 return USB_STOR_TRANSPORT_ERROR; 497 498 us->extra_destructor = jumpshot_info_destructor; 499 } 500 501 info = (struct jumpshot_info *) (us->extra); 502 503 if (srb->cmnd[0] == INQUIRY) { 504 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); 505 memcpy(ptr, inquiry_response, sizeof(inquiry_response)); 506 fill_inquiry_response(us, ptr, 36); 507 return USB_STOR_TRANSPORT_GOOD; 508 } 509 510 if (srb->cmnd[0] == READ_CAPACITY) { 511 info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec 512 513 rc = jumpshot_get_status(us); 514 if (rc != USB_STOR_TRANSPORT_GOOD) 515 return rc; 516 517 rc = jumpshot_id_device(us, info); 518 if (rc != USB_STOR_TRANSPORT_GOOD) 519 return rc; 520 521 usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", 522 info->sectors, info->ssize); 523 524 // build the reply 525 // 526 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); 527 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); 528 usb_stor_set_xfer_buf(ptr, 8, srb); 529 530 return USB_STOR_TRANSPORT_GOOD; 531 } 532 533 if (srb->cmnd[0] == MODE_SELECT_10) { 534 usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); 535 return USB_STOR_TRANSPORT_ERROR; 536 } 537 538 if (srb->cmnd[0] == READ_10) { 539 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 540 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 541 542 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); 543 544 usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", 545 block, blocks); 546 return jumpshot_read_data(us, info, block, blocks); 547 } 548 549 if (srb->cmnd[0] == READ_12) { 550 // I don't think we'll ever see a READ_12 but support it anyway... 551 // 552 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 553 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 554 555 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | 556 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); 557 558 usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", 559 block, blocks); 560 return jumpshot_read_data(us, info, block, blocks); 561 } 562 563 if (srb->cmnd[0] == WRITE_10) { 564 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 565 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 566 567 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); 568 569 usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", 570 block, blocks); 571 return jumpshot_write_data(us, info, block, blocks); 572 } 573 574 if (srb->cmnd[0] == WRITE_12) { 575 // I don't think we'll ever see a WRITE_12 but support it anyway... 576 // 577 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 578 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 579 580 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | 581 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); 582 583 usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", 584 block, blocks); 585 return jumpshot_write_data(us, info, block, blocks); 586 } 587 588 589 if (srb->cmnd[0] == TEST_UNIT_READY) { 590 usb_stor_dbg(us, "TEST_UNIT_READY\n"); 591 return jumpshot_get_status(us); 592 } 593 594 if (srb->cmnd[0] == REQUEST_SENSE) { 595 usb_stor_dbg(us, "REQUEST_SENSE\n"); 596 597 memset(ptr, 0, 18); 598 ptr[0] = 0xF0; 599 ptr[2] = info->sense_key; 600 ptr[7] = 11; 601 ptr[12] = info->sense_asc; 602 ptr[13] = info->sense_ascq; 603 usb_stor_set_xfer_buf(ptr, 18, srb); 604 605 return USB_STOR_TRANSPORT_GOOD; 606 } 607 608 if (srb->cmnd[0] == MODE_SENSE) { 609 usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); 610 return jumpshot_handle_mode_sense(us, srb, 1); 611 } 612 613 if (srb->cmnd[0] == MODE_SENSE_10) { 614 usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); 615 return jumpshot_handle_mode_sense(us, srb, 0); 616 } 617 618 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { 619 // sure. whatever. not like we can stop the user from popping 620 // the media out of the device (no locking doors, etc) 621 // 622 return USB_STOR_TRANSPORT_GOOD; 623 } 624 625 if (srb->cmnd[0] == START_STOP) { 626 /* this is used by sd.c'check_scsidisk_media_change to detect 627 media change */ 628 usb_stor_dbg(us, "START_STOP\n"); 629 /* the first jumpshot_id_device after a media change returns 630 an error (determined experimentally) */ 631 rc = jumpshot_id_device(us, info); 632 if (rc == USB_STOR_TRANSPORT_GOOD) { 633 info->sense_key = NO_SENSE; 634 srb->result = SUCCESS; 635 } else { 636 info->sense_key = UNIT_ATTENTION; 637 srb->result = SAM_STAT_CHECK_CONDITION; 638 } 639 return rc; 640 } 641 642 usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", 643 srb->cmnd[0], srb->cmnd[0]); 644 info->sense_key = 0x05; 645 info->sense_asc = 0x20; 646 info->sense_ascq = 0x00; 647 return USB_STOR_TRANSPORT_FAILED; 648 } 649 650 static int jumpshot_probe(struct usb_interface *intf, 651 const struct usb_device_id *id) 652 { 653 struct us_data *us; 654 int result; 655 656 result = usb_stor_probe1(&us, intf, id, 657 (id - jumpshot_usb_ids) + jumpshot_unusual_dev_list); 658 if (result) 659 return result; 660 661 us->transport_name = "Lexar Jumpshot Control/Bulk"; 662 us->transport = jumpshot_transport; 663 us->transport_reset = usb_stor_Bulk_reset; 664 us->max_lun = 1; 665 666 result = usb_stor_probe2(us); 667 return result; 668 } 669 670 static struct usb_driver jumpshot_driver = { 671 .name = "ums-jumpshot", 672 .probe = jumpshot_probe, 673 .disconnect = usb_stor_disconnect, 674 .suspend = usb_stor_suspend, 675 .resume = usb_stor_resume, 676 .reset_resume = usb_stor_reset_resume, 677 .pre_reset = usb_stor_pre_reset, 678 .post_reset = usb_stor_post_reset, 679 .id_table = jumpshot_usb_ids, 680 .soft_unbind = 1, 681 .no_dynamic_id = 1, 682 }; 683 684 module_usb_driver(jumpshot_driver); 685