1# SPDX-License-Identifier: GPL-2.0 2# 3# USB Storage driver configuration 4# 5 6comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" 7comment "also be needed; see USB_STORAGE Help for more info" 8 9config USB_STORAGE 10 tristate "USB Mass Storage support" 11 depends on SCSI 12 help 13 Say Y here if you want to connect USB mass storage devices to your 14 computer's USB port. This is the driver you need for USB 15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, 16 USB flash devices, and memory sticks, along with 17 similar devices. This driver may also be used for some cameras 18 and card readers. 19 20 This option depends on 'SCSI' support being enabled, but you 21 probably also need 'SCSI device support: SCSI disk support' 22 (BLK_DEV_SD) for most USB storage devices. 23 24 To compile this driver as a module, choose M here: the 25 module will be called usb-storage. 26 27if USB_STORAGE 28 29config USB_STORAGE_DEBUG 30 bool "USB Mass Storage verbose debug" 31 help 32 Say Y here in order to have the USB Mass Storage code generate 33 verbose debugging messages. 34 35config USB_STORAGE_REALTEK 36 tristate "Realtek Card Reader support" 37 help 38 Say Y here to include additional code to support the power-saving function 39 for Realtek RTS51xx USB card readers. 40 41 If this driver is compiled as a module, it will be named ums-realtek. 42 43config REALTEK_AUTOPM 44 bool "Realtek Card Reader autosuspend support" 45 depends on USB_STORAGE_REALTEK && PM 46 default y 47 48config USB_STORAGE_DATAFAB 49 tristate "Datafab Compact Flash Reader support" 50 help 51 Support for certain Datafab CompactFlash readers. 52 Datafab has a web page at <http://www.datafab.com/>. 53 54 If this driver is compiled as a module, it will be named ums-datafab. 55 56config USB_STORAGE_FREECOM 57 tristate "Freecom USB/ATAPI Bridge support" 58 help 59 Support for the Freecom USB to IDE/ATAPI adaptor. 60 Freecom has a web page at <https://www.freecom.de/>. 61 62 If this driver is compiled as a module, it will be named ums-freecom. 63 64config USB_STORAGE_ISD200 65 tristate "ISD-200 USB/ATA Bridge support" 66 help 67 Say Y here if you want to use USB Mass Store devices based 68 on the In-Systems Design ISD-200 USB/ATA bridge. 69 70 Some of the products that use this chip are: 71 72 - Archos Jukebox 6000 73 - ISD SmartCable for Storage 74 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge 75 - Sony CRX10U CD-R/RW drive 76 - CyQ've CQ8060A CDRW drive 77 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) 78 79 If this driver is compiled as a module, it will be named ums-isd200. 80 81config USB_STORAGE_USBAT 82 tristate "USBAT/USBAT02-based storage support" 83 help 84 Say Y here to include additional code to support storage devices 85 based on the SCM/Shuttle USBAT/USBAT02 processors. 86 87 Devices reported to work with this driver include: 88 - CompactFlash reader included with Kodak DC3800 camera 89 - Dane-Elec Zmate CompactFlash reader 90 - Delkin Efilm reader2 91 - HP 8200e/8210e/8230e CD-Writer Plus drives 92 - I-JAM JS-50U 93 - Jessops CompactFlash JESDCFRU BLACK 94 - Kingston Technology PCREAD-USB/CF 95 - Maxell UA4 CompactFlash reader 96 - Memorex UCF-100 97 - Microtech ZiO! ICS-45 CF2 98 - RCA LYRA MP3 portable 99 - Sandisk ImageMate SDDR-05b 100 101 If this driver is compiled as a module, it will be named ums-usbat. 102 103config USB_STORAGE_SDDR09 104 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" 105 help 106 Say Y here to include additional code to support the Sandisk SDDR-09 107 SmartMedia reader in the USB Mass Storage driver. 108 Also works for the Microtech Zio! CompactFlash/SmartMedia reader. 109 110 If this driver is compiled as a module, it will be named ums-sddr09. 111 112config USB_STORAGE_SDDR55 113 tristate "SanDisk SDDR-55 SmartMedia support" 114 help 115 Say Y here to include additional code to support the Sandisk SDDR-55 116 SmartMedia reader in the USB Mass Storage driver. 117 118 If this driver is compiled as a module, it will be named ums-sddr55. 119 120config USB_STORAGE_JUMPSHOT 121 tristate "Lexar Jumpshot Compact Flash Reader" 122 help 123 Say Y here to include additional code to support the Lexar Jumpshot 124 USB CompactFlash reader. 125 126 If this driver is compiled as a module, it will be named ums-jumpshot. 127 128config USB_STORAGE_ALAUDA 129 tristate "Olympus MAUSB-10/Fuji DPC-R1 support" 130 help 131 Say Y here to include additional code to support the Olympus MAUSB-10 132 and Fujifilm DPC-R1 USB Card reader/writer devices. 133 134 These devices are based on the Alauda chip and support both 135 XD and SmartMedia cards. 136 137 If this driver is compiled as a module, it will be named ums-alauda. 138 139config USB_STORAGE_ONETOUCH 140 tristate "Support OneTouch Button on Maxtor Hard Drives" 141 depends on INPUT=y || INPUT=USB_STORAGE 142 help 143 Say Y here to include additional code to support the Maxtor OneTouch 144 USB hard drive's onetouch button. 145 146 This code registers the button on the front of Maxtor OneTouch USB 147 hard drive's as an input device. An action can be associated with 148 this input in any keybinding software. (e.g. gnome's keyboard short- 149 cuts) 150 151 If this driver is compiled as a module, it will be named ums-onetouch. 152 153config USB_STORAGE_KARMA 154 tristate "Support for Rio Karma music player" 155 help 156 Say Y here to include additional code to support the Rio Karma 157 USB interface. 158 159 This code places the Rio Karma into mass storage mode, enabling 160 it to be mounted as an ordinary filesystem. Performing an eject 161 on the resulting scsi device node returns the Karma to normal 162 operation. 163 164 If this driver is compiled as a module, it will be named ums-karma. 165 166config USB_STORAGE_CYPRESS_ATACB 167 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" 168 help 169 Say Y here if you want to use SAT (ata pass through) on devices based 170 on the Cypress USB/ATA bridge supporting ATACB. This will allow you 171 to use tools to tune and monitor your drive (like hdparm or smartctl). 172 173 If you say no here your device will still work with the standard usb 174 mass storage class. 175 176 If this driver is compiled as a module, it will be named ums-cypress. 177 178config USB_STORAGE_ENE_UB6250 179 tristate "USB ENE card reader support" 180 help 181 Say Y here if you wish to control a ENE SD/MS Card reader. 182 Note that this driver does not support SM cards. 183 184 To compile this driver as a module, choose M here: the 185 module will be called ums-eneub6250. 186 187endif # USB_STORAGE 188 189config USB_UAS 190 tristate "USB Attached SCSI" 191 depends on SCSI && USB_STORAGE 192 help 193 The USB Attached SCSI protocol is supported by some USB 194 storage devices. It permits higher performance by supporting 195 multiple outstanding commands. 196 197 If you don't know whether you have a UAS device, it is safe to 198 say 'Y' or 'M' here and the kernel will use the right driver. 199 200 If you compile this driver as a module, it will be named uas. 201