xref: /openbmc/linux/drivers/usb/storage/Kconfig (revision ba61bb17)
1#
2# USB Storage driver configuration
3#
4
5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6comment "also be needed; see USB_STORAGE Help for more info"
7
8config USB_STORAGE
9	tristate "USB Mass Storage support"
10	depends on SCSI
11	---help---
12	  Say Y here if you want to connect USB mass storage devices to your
13	  computer's USB port. This is the driver you need for USB
14	  floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
15	  USB flash devices, and memory sticks, along with
16	  similar devices. This driver may also be used for some cameras
17	  and card readers.
18
19	  This option depends on 'SCSI' support being enabled, but you
20	  probably also need 'SCSI device support: SCSI disk support'
21	  (BLK_DEV_SD) for most USB storage devices.
22
23	  To compile this driver as a module, choose M here: the
24	  module will be called usb-storage.
25
26config USB_STORAGE_DEBUG
27	bool "USB Mass Storage verbose debug"
28	depends on USB_STORAGE
29	help
30	  Say Y here in order to have the USB Mass Storage code generate
31	  verbose debugging messages.
32
33config USB_STORAGE_REALTEK
34	tristate "Realtek Card Reader support"
35	depends on USB_STORAGE
36	help
37	  Say Y here to include additional code to support the power-saving function
38	  for Realtek RTS51xx USB card readers.
39
40	  If this driver is compiled as a module, it will be named ums-realtek.
41
42config REALTEK_AUTOPM
43	bool "Realtek Card Reader autosuspend support"
44	depends on USB_STORAGE_REALTEK && PM
45	default y
46
47config USB_STORAGE_DATAFAB
48	tristate "Datafab Compact Flash Reader support"
49	depends on USB_STORAGE
50	help
51	  Support for certain Datafab CompactFlash readers.
52	  Datafab has a web page at <http://www.datafab.com/>.
53
54	  If this driver is compiled as a module, it will be named ums-datafab.
55
56config USB_STORAGE_FREECOM
57	tristate "Freecom USB/ATAPI Bridge support"
58	depends on USB_STORAGE
59	help
60	  Support for the Freecom USB to IDE/ATAPI adaptor.
61	  Freecom has a web page at <http://www.freecom.de/>.
62
63	  If this driver is compiled as a module, it will be named ums-freecom.
64
65config USB_STORAGE_ISD200
66	tristate "ISD-200 USB/ATA Bridge support"
67	depends on USB_STORAGE
68	---help---
69	  Say Y here if you want to use USB Mass Store devices based
70	  on the In-Systems Design ISD-200 USB/ATA bridge.
71
72	  Some of the products that use this chip are:
73
74	  - Archos Jukebox 6000
75	  - ISD SmartCable for Storage
76	  - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
77	  - Sony CRX10U CD-R/RW drive
78	  - CyQ've CQ8060A CDRW drive
79	  - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
80
81	  If this driver is compiled as a module, it will be named ums-isd200.
82
83config USB_STORAGE_USBAT
84	tristate "USBAT/USBAT02-based storage support"
85	depends on USB_STORAGE
86	help
87	  Say Y here to include additional code to support storage devices
88	  based on the SCM/Shuttle USBAT/USBAT02 processors.
89
90	  Devices reported to work with this driver include:
91	  - CompactFlash reader included with Kodak DC3800 camera
92	  - Dane-Elec Zmate CompactFlash reader
93	  - Delkin Efilm reader2
94	  - HP 8200e/8210e/8230e CD-Writer Plus drives
95	  - I-JAM JS-50U
96	  - Jessops CompactFlash JESDCFRU BLACK
97	  - Kingston Technology PCREAD-USB/CF
98	  - Maxell UA4 CompactFlash reader
99	  - Memorex UCF-100
100	  - Microtech ZiO! ICS-45 CF2
101	  - RCA LYRA MP3 portable
102	  - Sandisk ImageMate SDDR-05b
103
104	  If this driver is compiled as a module, it will be named ums-usbat.
105
106config USB_STORAGE_SDDR09
107	tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
108	depends on USB_STORAGE
109	help
110	  Say Y here to include additional code to support the Sandisk SDDR-09
111	  SmartMedia reader in the USB Mass Storage driver.
112	  Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
113
114	  If this driver is compiled as a module, it will be named ums-sddr09.
115
116config USB_STORAGE_SDDR55
117	tristate "SanDisk SDDR-55 SmartMedia support"
118	depends on USB_STORAGE
119	help
120	  Say Y here to include additional code to support the Sandisk SDDR-55
121	  SmartMedia reader in the USB Mass Storage driver.
122
123	  If this driver is compiled as a module, it will be named ums-sddr55.
124
125config USB_STORAGE_JUMPSHOT
126	tristate "Lexar Jumpshot Compact Flash Reader"
127	depends on USB_STORAGE
128	help
129	  Say Y here to include additional code to support the Lexar Jumpshot
130	  USB CompactFlash reader.
131
132	  If this driver is compiled as a module, it will be named ums-jumpshot.
133
134config USB_STORAGE_ALAUDA
135	tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
136	depends on USB_STORAGE
137	help
138	  Say Y here to include additional code to support the Olympus MAUSB-10
139	  and Fujifilm DPC-R1 USB Card reader/writer devices.
140
141	  These devices are based on the Alauda chip and support both
142	  XD and SmartMedia cards.
143
144	  If this driver is compiled as a module, it will be named ums-alauda.
145
146config USB_STORAGE_ONETOUCH
147	tristate "Support OneTouch Button on Maxtor Hard Drives"
148	depends on USB_STORAGE
149	depends on INPUT=y || INPUT=USB_STORAGE
150	help
151	  Say Y here to include additional code to support the Maxtor OneTouch
152	  USB hard drive's onetouch button.
153
154	  This code registers the button on the front of Maxtor OneTouch USB
155	  hard drive's as an input device. An action can be associated with
156	  this input in any keybinding software. (e.g. gnome's keyboard short-
157	  cuts)
158
159	  If this driver is compiled as a module, it will be named ums-onetouch.
160
161config USB_STORAGE_KARMA
162	tristate "Support for Rio Karma music player"
163	depends on USB_STORAGE
164	help
165	  Say Y here to include additional code to support the Rio Karma
166	  USB interface.
167
168	  This code places the Rio Karma into mass storage mode, enabling
169	  it to be mounted as an ordinary filesystem. Performing an eject
170	  on the resulting scsi device node returns the Karma to normal
171	  operation.
172
173	  If this driver is compiled as a module, it will be named ums-karma.
174
175config USB_STORAGE_CYPRESS_ATACB
176	tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
177	depends on USB_STORAGE
178	---help---
179	  Say Y here if you want to use SAT (ata pass through) on devices based
180	  on the Cypress USB/ATA bridge supporting ATACB. This will allow you
181	  to use tools to tune and monitor your drive (like hdparm or smartctl).
182
183	  If you say no here your device will still work with the standard usb
184	  mass storage class.
185
186	  If this driver is compiled as a module, it will be named ums-cypress.
187
188config USB_STORAGE_ENE_UB6250
189	tristate "USB ENE card reader support"
190	depends on SCSI
191	depends on USB_STORAGE
192	---help---
193	  Say Y here if you wish to control a ENE SD/MS Card reader.
194	  Note that this driver does not support SM cards.
195
196	  This option depends on 'SCSI' support being enabled, but you
197	  probably also need 'SCSI device support: SCSI disk support'
198	  (BLK_DEV_SD) for most USB storage devices.
199
200	  To compile this driver as a module, choose M here: the
201	  module will be called ums-eneub6250.
202
203config USB_UAS
204	tristate "USB Attached SCSI"
205	depends on SCSI && USB_STORAGE
206	help
207	  The USB Attached SCSI protocol is supported by some USB
208	  storage devices.  It permits higher performance by supporting
209	  multiple outstanding commands.
210
211	  If you don't know whether you have a UAS device, it is safe to
212	  say 'Y' or 'M' here and the kernel will use the right driver.
213
214	  If you compile this driver as a module, it will be named uas.
215