1# 2# USB Storage driver configuration 3# 4 5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" 6comment "also be needed; see USB_STORAGE Help for more info" 7 8config USB_STORAGE 9 tristate "USB Mass Storage support" 10 depends on SCSI 11 ---help--- 12 Say Y here if you want to connect USB mass storage devices to your 13 computer's USB port. This is the driver you need for USB 14 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, 15 USB flash devices, and memory sticks, along with 16 similar devices. This driver may also be used for some cameras 17 and card readers. 18 19 This option depends on 'SCSI' support being enabled, but you 20 probably also need 'SCSI device support: SCSI disk support' 21 (BLK_DEV_SD) for most USB storage devices. 22 23 To compile this driver as a module, choose M here: the 24 module will be called usb-storage. 25 26if USB_STORAGE 27 28config USB_STORAGE_DEBUG 29 bool "USB Mass Storage verbose debug" 30 help 31 Say Y here in order to have the USB Mass Storage code generate 32 verbose debugging messages. 33 34config USB_STORAGE_REALTEK 35 tristate "Realtek Card Reader support" 36 help 37 Say Y here to include additional code to support the power-saving function 38 for Realtek RTS51xx USB card readers. 39 40 If this driver is compiled as a module, it will be named ums-realtek. 41 42config REALTEK_AUTOPM 43 bool "Realtek Card Reader autosuspend support" 44 depends on USB_STORAGE_REALTEK && PM 45 default y 46 47config USB_STORAGE_DATAFAB 48 tristate "Datafab Compact Flash Reader support" 49 help 50 Support for certain Datafab CompactFlash readers. 51 Datafab has a web page at <http://www.datafab.com/>. 52 53 If this driver is compiled as a module, it will be named ums-datafab. 54 55config USB_STORAGE_FREECOM 56 tristate "Freecom USB/ATAPI Bridge support" 57 help 58 Support for the Freecom USB to IDE/ATAPI adaptor. 59 Freecom has a web page at <http://www.freecom.de/>. 60 61 If this driver is compiled as a module, it will be named ums-freecom. 62 63config USB_STORAGE_ISD200 64 tristate "ISD-200 USB/ATA Bridge support" 65 ---help--- 66 Say Y here if you want to use USB Mass Store devices based 67 on the In-Systems Design ISD-200 USB/ATA bridge. 68 69 Some of the products that use this chip are: 70 71 - Archos Jukebox 6000 72 - ISD SmartCable for Storage 73 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge 74 - Sony CRX10U CD-R/RW drive 75 - CyQ've CQ8060A CDRW drive 76 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) 77 78 If this driver is compiled as a module, it will be named ums-isd200. 79 80config USB_STORAGE_USBAT 81 tristate "USBAT/USBAT02-based storage support" 82 help 83 Say Y here to include additional code to support storage devices 84 based on the SCM/Shuttle USBAT/USBAT02 processors. 85 86 Devices reported to work with this driver include: 87 - CompactFlash reader included with Kodak DC3800 camera 88 - Dane-Elec Zmate CompactFlash reader 89 - Delkin Efilm reader2 90 - HP 8200e/8210e/8230e CD-Writer Plus drives 91 - I-JAM JS-50U 92 - Jessops CompactFlash JESDCFRU BLACK 93 - Kingston Technology PCREAD-USB/CF 94 - Maxell UA4 CompactFlash reader 95 - Memorex UCF-100 96 - Microtech ZiO! ICS-45 CF2 97 - RCA LYRA MP3 portable 98 - Sandisk ImageMate SDDR-05b 99 100 If this driver is compiled as a module, it will be named ums-usbat. 101 102config USB_STORAGE_SDDR09 103 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" 104 help 105 Say Y here to include additional code to support the Sandisk SDDR-09 106 SmartMedia reader in the USB Mass Storage driver. 107 Also works for the Microtech Zio! CompactFlash/SmartMedia reader. 108 109 If this driver is compiled as a module, it will be named ums-sddr09. 110 111config USB_STORAGE_SDDR55 112 tristate "SanDisk SDDR-55 SmartMedia support" 113 help 114 Say Y here to include additional code to support the Sandisk SDDR-55 115 SmartMedia reader in the USB Mass Storage driver. 116 117 If this driver is compiled as a module, it will be named ums-sddr55. 118 119config USB_STORAGE_JUMPSHOT 120 tristate "Lexar Jumpshot Compact Flash Reader" 121 help 122 Say Y here to include additional code to support the Lexar Jumpshot 123 USB CompactFlash reader. 124 125 If this driver is compiled as a module, it will be named ums-jumpshot. 126 127config USB_STORAGE_ALAUDA 128 tristate "Olympus MAUSB-10/Fuji DPC-R1 support" 129 help 130 Say Y here to include additional code to support the Olympus MAUSB-10 131 and Fujifilm DPC-R1 USB Card reader/writer devices. 132 133 These devices are based on the Alauda chip and support both 134 XD and SmartMedia cards. 135 136 If this driver is compiled as a module, it will be named ums-alauda. 137 138config USB_STORAGE_ONETOUCH 139 tristate "Support OneTouch Button on Maxtor Hard Drives" 140 depends on INPUT=y || INPUT=USB_STORAGE 141 help 142 Say Y here to include additional code to support the Maxtor OneTouch 143 USB hard drive's onetouch button. 144 145 This code registers the button on the front of Maxtor OneTouch USB 146 hard drive's as an input device. An action can be associated with 147 this input in any keybinding software. (e.g. gnome's keyboard short- 148 cuts) 149 150 If this driver is compiled as a module, it will be named ums-onetouch. 151 152config USB_STORAGE_KARMA 153 tristate "Support for Rio Karma music player" 154 help 155 Say Y here to include additional code to support the Rio Karma 156 USB interface. 157 158 This code places the Rio Karma into mass storage mode, enabling 159 it to be mounted as an ordinary filesystem. Performing an eject 160 on the resulting scsi device node returns the Karma to normal 161 operation. 162 163 If this driver is compiled as a module, it will be named ums-karma. 164 165config USB_STORAGE_CYPRESS_ATACB 166 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" 167 ---help--- 168 Say Y here if you want to use SAT (ata pass through) on devices based 169 on the Cypress USB/ATA bridge supporting ATACB. This will allow you 170 to use tools to tune and monitor your drive (like hdparm or smartctl). 171 172 If you say no here your device will still work with the standard usb 173 mass storage class. 174 175 If this driver is compiled as a module, it will be named ums-cypress. 176 177config USB_STORAGE_ENE_UB6250 178 tristate "USB ENE card reader support" 179 ---help--- 180 Say Y here if you wish to control a ENE SD/MS Card reader. 181 Note that this driver does not support SM cards. 182 183 To compile this driver as a module, choose M here: the 184 module will be called ums-eneub6250. 185 186endif # USB_STORAGE 187 188config USB_UAS 189 tristate "USB Attached SCSI" 190 depends on SCSI && USB_STORAGE 191 help 192 The USB Attached SCSI protocol is supported by some USB 193 storage devices. It permits higher performance by supporting 194 multiple outstanding commands. 195 196 If you don't know whether you have a UAS device, it is safe to 197 say 'Y' or 'M' here and the kernel will use the right driver. 198 199 If you compile this driver as a module, it will be named uas. 200