1# 2# USB Storage driver configuration 3# 4 5comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" 6comment "may also be needed; see USB_STORAGE Help for more information" 7 depends on USB 8 9config USB_STORAGE 10 tristate "USB Mass Storage support" 11 depends on USB 12 select SCSI 13 ---help--- 14 Say Y here if you want to connect USB mass storage devices to your 15 computer's USB port. This is the driver you need for USB 16 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, 17 USB flash devices, and memory sticks, along with 18 similar devices. This driver may also be used for some cameras 19 and card readers. 20 21 This option 'selects' (turns on, enables) 'SCSI', but you 22 probably also need 'SCSI device support: SCSI disk support' 23 (BLK_DEV_SD) for most USB storage devices. 24 25 To compile this driver as a module, choose M here: the 26 module will be called usb-storage. 27 28config USB_STORAGE_DEBUG 29 bool "USB Mass Storage verbose debug" 30 depends on USB_STORAGE 31 help 32 Say Y here in order to have the USB Mass Storage code generate 33 verbose debugging messages. 34 35config USB_STORAGE_DATAFAB 36 bool "Datafab Compact Flash Reader support (EXPERIMENTAL)" 37 depends on USB_STORAGE && EXPERIMENTAL 38 help 39 Support for certain Datafab CompactFlash readers. 40 Datafab has a web page at <http://www.datafabusa.com/>. 41 42config USB_STORAGE_FREECOM 43 bool "Freecom USB/ATAPI Bridge support" 44 depends on USB_STORAGE 45 help 46 Support for the Freecom USB to IDE/ATAPI adaptor. 47 Freecom has a web page at <http://www.freecom.de/>. 48 49config USB_STORAGE_ISD200 50 bool "ISD-200 USB/ATA Bridge support" 51 depends on USB_STORAGE 52 depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE 53 ---help--- 54 Say Y here if you want to use USB Mass Store devices based 55 on the In-Systems Design ISD-200 USB/ATA bridge. 56 57 Some of the products that use this chip are: 58 59 - Archos Jukebox 6000 60 - ISD SmartCable for Storage 61 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge 62 - Sony CRX10U CD-R/RW drive 63 - CyQ've CQ8060A CDRW drive 64 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) 65 66config USB_STORAGE_DPCM 67 bool "Microtech/ZiO! CompactFlash/SmartMedia support" 68 depends on USB_STORAGE 69 help 70 Say Y here to support the Microtech/ZiO! CompactFlash reader. 71 There is a web page at <http://www.ziocorp.com/products/>. 72 73config USB_STORAGE_USBAT 74 bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)" 75 depends on USB_STORAGE && EXPERIMENTAL 76 help 77 Say Y here to include additional code to support storage devices 78 based on the SCM/Shuttle USBAT/USBAT02 processors. 79 80 Devices reported to work with this driver include: 81 - CompactFlash reader included with Kodak DC3800 camera 82 - Dane-Elec Zmate CompactFlash reader 83 - Delkin Efilm reader2 84 - HP 8200e/8210e/8230e CD-Writer Plus drives 85 - I-JAM JS-50U 86 - Jessops CompactFlash JESDCFRU BLACK 87 - Kingston Technology PCREAD-USB/CF 88 - Maxell UA4 CompactFlash reader 89 - Memorex UCF-100 90 - Microtech ZiO! ICS-45 CF2 91 - RCA LYRA MP3 portable 92 - Sandisk ImageMate SDDR-05b 93 94config USB_STORAGE_SDDR09 95 bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)" 96 depends on USB_STORAGE && EXPERIMENTAL 97 help 98 Say Y here to include additional code to support the Sandisk SDDR-09 99 SmartMedia reader in the USB Mass Storage driver. 100 Also works for the Microtech Zio! SmartMedia reader. 101 102config USB_STORAGE_SDDR55 103 bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)" 104 depends on USB_STORAGE && EXPERIMENTAL 105 help 106 Say Y here to include additional code to support the Sandisk SDDR-55 107 SmartMedia reader in the USB Mass Storage driver. 108 109config USB_STORAGE_JUMPSHOT 110 bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)" 111 depends on USB_STORAGE && EXPERIMENTAL 112 help 113 Say Y here to include additional code to support the Lexar Jumpshot 114 USB CompactFlash reader. 115 116config USB_STORAGE_ALAUDA 117 bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)" 118 depends on USB_STORAGE && EXPERIMENTAL 119 help 120 Say Y here to include additional code to support the Olympus MAUSB-10 121 and Fujifilm DPC-R1 USB Card reader/writer devices. 122 123 These devices are based on the Alauda chip and support support both 124 XD and SmartMedia cards. 125 126config USB_STORAGE_ONETOUCH 127 bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)" 128 depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM 129 help 130 Say Y here to include additional code to support the Maxtor OneTouch 131 USB hard drive's onetouch button. 132 133 This code registers the button on the front of Maxtor OneTouch USB 134 hard drive's as an input device. An action can be associated with 135 this input in any keybinding software. (e.g. gnome's keyboard short- 136 cuts) 137 138config USB_LIBUSUAL 139 bool "The shared table of common (or usual) storage devices" 140 depends on USB 141 help 142 This module contains a table of common (or usual) devices 143 for usb-storage and ub drivers, and allows to switch binding 144 of these devices without rebuilding modules. 145 146 Typical syntax of /etc/modprobe.conf is: 147 148 options libusual bias="ub" 149 150 If unsure, say N. 151