1 /* 2 * USB ConnectTech WhiteHEAT driver 3 * 4 * Copyright (C) 2002 5 * Connect Tech Inc. 6 * 7 * Copyright (C) 1999 - 2001 8 * Greg Kroah-Hartman (greg@kroah.com) 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * See Documentation/usb/usb-serial.txt for more information on using this 16 * driver 17 */ 18 19 #include <linux/kernel.h> 20 #include <linux/errno.h> 21 #include <linux/slab.h> 22 #include <linux/tty.h> 23 #include <linux/tty_driver.h> 24 #include <linux/tty_flip.h> 25 #include <linux/module.h> 26 #include <linux/spinlock.h> 27 #include <linux/mutex.h> 28 #include <linux/uaccess.h> 29 #include <asm/termbits.h> 30 #include <linux/usb.h> 31 #include <linux/serial_reg.h> 32 #include <linux/serial.h> 33 #include <linux/usb/serial.h> 34 #include <linux/usb/ezusb.h> 35 #include "whiteheat.h" /* WhiteHEAT specific commands */ 36 37 #ifndef CMSPAR 38 #define CMSPAR 0 39 #endif 40 41 /* 42 * Version Information 43 */ 44 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>" 45 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" 46 47 #define CONNECT_TECH_VENDOR_ID 0x0710 48 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001 49 #define CONNECT_TECH_WHITE_HEAT_ID 0x8001 50 51 /* 52 ID tables for whiteheat are unusual, because we want to different 53 things for different versions of the device. Eventually, this 54 will be doable from a single table. But, for now, we define two 55 separate ID tables, and then a third table that combines them 56 just for the purpose of exporting the autoloading information. 57 */ 58 static const struct usb_device_id id_table_std[] = { 59 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, 60 { } /* Terminating entry */ 61 }; 62 63 static const struct usb_device_id id_table_prerenumeration[] = { 64 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, 65 { } /* Terminating entry */ 66 }; 67 68 static const struct usb_device_id id_table_combined[] = { 69 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, 70 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, 71 { } /* Terminating entry */ 72 }; 73 74 MODULE_DEVICE_TABLE(usb, id_table_combined); 75 76 77 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ 78 static int whiteheat_firmware_download(struct usb_serial *serial, 79 const struct usb_device_id *id); 80 static int whiteheat_firmware_attach(struct usb_serial *serial); 81 82 /* function prototypes for the Connect Tech WhiteHEAT serial converter */ 83 static int whiteheat_probe(struct usb_serial *serial, 84 const struct usb_device_id *id); 85 static int whiteheat_attach(struct usb_serial *serial); 86 static void whiteheat_release(struct usb_serial *serial); 87 static int whiteheat_port_probe(struct usb_serial_port *port); 88 static int whiteheat_port_remove(struct usb_serial_port *port); 89 static int whiteheat_open(struct tty_struct *tty, 90 struct usb_serial_port *port); 91 static void whiteheat_close(struct usb_serial_port *port); 92 static int whiteheat_ioctl(struct tty_struct *tty, 93 unsigned int cmd, unsigned long arg); 94 static void whiteheat_set_termios(struct tty_struct *tty, 95 struct usb_serial_port *port, struct ktermios *old); 96 static int whiteheat_tiocmget(struct tty_struct *tty); 97 static int whiteheat_tiocmset(struct tty_struct *tty, 98 unsigned int set, unsigned int clear); 99 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); 100 101 static struct usb_serial_driver whiteheat_fake_device = { 102 .driver = { 103 .owner = THIS_MODULE, 104 .name = "whiteheatnofirm", 105 }, 106 .description = "Connect Tech - WhiteHEAT - (prerenumeration)", 107 .id_table = id_table_prerenumeration, 108 .num_ports = 1, 109 .probe = whiteheat_firmware_download, 110 .attach = whiteheat_firmware_attach, 111 }; 112 113 static struct usb_serial_driver whiteheat_device = { 114 .driver = { 115 .owner = THIS_MODULE, 116 .name = "whiteheat", 117 }, 118 .description = "Connect Tech - WhiteHEAT", 119 .id_table = id_table_std, 120 .num_ports = 4, 121 .probe = whiteheat_probe, 122 .attach = whiteheat_attach, 123 .release = whiteheat_release, 124 .port_probe = whiteheat_port_probe, 125 .port_remove = whiteheat_port_remove, 126 .open = whiteheat_open, 127 .close = whiteheat_close, 128 .ioctl = whiteheat_ioctl, 129 .set_termios = whiteheat_set_termios, 130 .break_ctl = whiteheat_break_ctl, 131 .tiocmget = whiteheat_tiocmget, 132 .tiocmset = whiteheat_tiocmset, 133 .throttle = usb_serial_generic_throttle, 134 .unthrottle = usb_serial_generic_unthrottle, 135 }; 136 137 static struct usb_serial_driver * const serial_drivers[] = { 138 &whiteheat_fake_device, &whiteheat_device, NULL 139 }; 140 141 struct whiteheat_command_private { 142 struct mutex mutex; 143 __u8 port_running; 144 __u8 command_finished; 145 wait_queue_head_t wait_command; /* for handling sleeping whilst 146 waiting for a command to 147 finish */ 148 __u8 result_buffer[64]; 149 }; 150 151 struct whiteheat_private { 152 __u8 mcr; /* FIXME: no locking on mcr */ 153 }; 154 155 156 /* local function prototypes */ 157 static int start_command_port(struct usb_serial *serial); 158 static void stop_command_port(struct usb_serial *serial); 159 static void command_port_write_callback(struct urb *urb); 160 static void command_port_read_callback(struct urb *urb); 161 162 static int firm_send_command(struct usb_serial_port *port, __u8 command, 163 __u8 *data, __u8 datasize); 164 static int firm_open(struct usb_serial_port *port); 165 static int firm_close(struct usb_serial_port *port); 166 static void firm_setup_port(struct tty_struct *tty); 167 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); 168 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); 169 static int firm_set_break(struct usb_serial_port *port, __u8 onoff); 170 static int firm_purge(struct usb_serial_port *port, __u8 rxtx); 171 static int firm_get_dtr_rts(struct usb_serial_port *port); 172 static int firm_report_tx_done(struct usb_serial_port *port); 173 174 175 #define COMMAND_PORT 4 176 #define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */ 177 #define COMMAND_TIMEOUT_MS 2000 178 #define CLOSING_DELAY (30 * HZ) 179 180 181 /***************************************************************************** 182 * Connect Tech's White Heat prerenumeration driver functions 183 *****************************************************************************/ 184 185 /* steps to download the firmware to the WhiteHEAT device: 186 - hold the reset (by writing to the reset bit of the CPUCS register) 187 - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD 188 - release the reset (by writing to the CPUCS register) 189 - download the WH.HEX file for all addresses greater than 0x1b3f using 190 VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD 191 - hold the reset 192 - download the WH.HEX file for all addresses less than 0x1b40 using 193 VENDOR_REQUEST_ANCHOR_LOAD 194 - release the reset 195 - device renumerated itself and comes up as new device id with all 196 firmware download completed. 197 */ 198 static int whiteheat_firmware_download(struct usb_serial *serial, 199 const struct usb_device_id *id) 200 { 201 int response; 202 203 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); 204 if (response >= 0) { 205 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); 206 if (response >= 0) 207 return 0; 208 } 209 return -ENOENT; 210 } 211 212 213 static int whiteheat_firmware_attach(struct usb_serial *serial) 214 { 215 /* We want this device to fail to have a driver assigned to it */ 216 return 1; 217 } 218 219 220 /***************************************************************************** 221 * Connect Tech's White Heat serial driver functions 222 *****************************************************************************/ 223 224 static int whiteheat_probe(struct usb_serial *serial, 225 const struct usb_device_id *id) 226 { 227 struct usb_host_interface *iface_desc; 228 struct usb_endpoint_descriptor *endpoint; 229 size_t num_bulk_in = 0; 230 size_t num_bulk_out = 0; 231 size_t min_num_bulk; 232 unsigned int i; 233 234 iface_desc = serial->interface->cur_altsetting; 235 236 for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { 237 endpoint = &iface_desc->endpoint[i].desc; 238 if (usb_endpoint_is_bulk_in(endpoint)) 239 ++num_bulk_in; 240 if (usb_endpoint_is_bulk_out(endpoint)) 241 ++num_bulk_out; 242 } 243 244 min_num_bulk = COMMAND_PORT + 1; 245 if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk) 246 return -ENODEV; 247 248 return 0; 249 } 250 251 static int whiteheat_attach(struct usb_serial *serial) 252 { 253 struct usb_serial_port *command_port; 254 struct whiteheat_command_private *command_info; 255 struct whiteheat_hw_info *hw_info; 256 int pipe; 257 int ret; 258 int alen; 259 __u8 *command; 260 __u8 *result; 261 262 command_port = serial->port[COMMAND_PORT]; 263 264 pipe = usb_sndbulkpipe(serial->dev, 265 command_port->bulk_out_endpointAddress); 266 command = kmalloc(2, GFP_KERNEL); 267 if (!command) 268 goto no_command_buffer; 269 command[0] = WHITEHEAT_GET_HW_INFO; 270 command[1] = 0; 271 272 result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); 273 if (!result) 274 goto no_result_buffer; 275 /* 276 * When the module is reloaded the firmware is still there and 277 * the endpoints are still in the usb core unchanged. This is the 278 * unlinking bug in disguise. Same for the call below. 279 */ 280 usb_clear_halt(serial->dev, pipe); 281 ret = usb_bulk_msg(serial->dev, pipe, command, 2, 282 &alen, COMMAND_TIMEOUT_MS); 283 if (ret) { 284 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n", 285 serial->type->description, ret); 286 goto no_firmware; 287 } else if (alen != 2) { 288 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n", 289 serial->type->description, alen); 290 goto no_firmware; 291 } 292 293 pipe = usb_rcvbulkpipe(serial->dev, 294 command_port->bulk_in_endpointAddress); 295 /* See the comment on the usb_clear_halt() above */ 296 usb_clear_halt(serial->dev, pipe); 297 ret = usb_bulk_msg(serial->dev, pipe, result, 298 sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); 299 if (ret) { 300 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n", 301 serial->type->description, ret); 302 goto no_firmware; 303 } else if (alen != sizeof(*hw_info) + 1) { 304 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n", 305 serial->type->description, alen); 306 goto no_firmware; 307 } else if (result[0] != command[0]) { 308 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n", 309 serial->type->description, result[0]); 310 goto no_firmware; 311 } 312 313 hw_info = (struct whiteheat_hw_info *)&result[1]; 314 315 dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n", 316 serial->type->description, 317 hw_info->sw_major_rev, hw_info->sw_minor_rev); 318 319 command_info = kmalloc(sizeof(struct whiteheat_command_private), 320 GFP_KERNEL); 321 if (!command_info) 322 goto no_command_private; 323 324 mutex_init(&command_info->mutex); 325 command_info->port_running = 0; 326 init_waitqueue_head(&command_info->wait_command); 327 usb_set_serial_port_data(command_port, command_info); 328 command_port->write_urb->complete = command_port_write_callback; 329 command_port->read_urb->complete = command_port_read_callback; 330 kfree(result); 331 kfree(command); 332 333 return 0; 334 335 no_firmware: 336 /* Firmware likely not running */ 337 dev_err(&serial->dev->dev, 338 "%s: Unable to retrieve firmware version, try replugging\n", 339 serial->type->description); 340 dev_err(&serial->dev->dev, 341 "%s: If the firmware is not running (status led not blinking)\n", 342 serial->type->description); 343 dev_err(&serial->dev->dev, 344 "%s: please contact support@connecttech.com\n", 345 serial->type->description); 346 kfree(result); 347 kfree(command); 348 return -ENODEV; 349 350 no_command_private: 351 kfree(result); 352 no_result_buffer: 353 kfree(command); 354 no_command_buffer: 355 return -ENOMEM; 356 } 357 358 static void whiteheat_release(struct usb_serial *serial) 359 { 360 struct usb_serial_port *command_port; 361 362 /* free up our private data for our command port */ 363 command_port = serial->port[COMMAND_PORT]; 364 kfree(usb_get_serial_port_data(command_port)); 365 } 366 367 static int whiteheat_port_probe(struct usb_serial_port *port) 368 { 369 struct whiteheat_private *info; 370 371 info = kzalloc(sizeof(*info), GFP_KERNEL); 372 if (!info) 373 return -ENOMEM; 374 375 usb_set_serial_port_data(port, info); 376 377 return 0; 378 } 379 380 static int whiteheat_port_remove(struct usb_serial_port *port) 381 { 382 struct whiteheat_private *info; 383 384 info = usb_get_serial_port_data(port); 385 kfree(info); 386 387 return 0; 388 } 389 390 static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) 391 { 392 int retval; 393 394 retval = start_command_port(port->serial); 395 if (retval) 396 goto exit; 397 398 /* send an open port command */ 399 retval = firm_open(port); 400 if (retval) { 401 stop_command_port(port->serial); 402 goto exit; 403 } 404 405 retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX); 406 if (retval) { 407 firm_close(port); 408 stop_command_port(port->serial); 409 goto exit; 410 } 411 412 if (tty) 413 firm_setup_port(tty); 414 415 /* Work around HCD bugs */ 416 usb_clear_halt(port->serial->dev, port->read_urb->pipe); 417 usb_clear_halt(port->serial->dev, port->write_urb->pipe); 418 419 retval = usb_serial_generic_open(tty, port); 420 if (retval) { 421 firm_close(port); 422 stop_command_port(port->serial); 423 goto exit; 424 } 425 exit: 426 return retval; 427 } 428 429 430 static void whiteheat_close(struct usb_serial_port *port) 431 { 432 firm_report_tx_done(port); 433 firm_close(port); 434 435 usb_serial_generic_close(port); 436 437 stop_command_port(port->serial); 438 } 439 440 static int whiteheat_tiocmget(struct tty_struct *tty) 441 { 442 struct usb_serial_port *port = tty->driver_data; 443 struct whiteheat_private *info = usb_get_serial_port_data(port); 444 unsigned int modem_signals = 0; 445 446 firm_get_dtr_rts(port); 447 if (info->mcr & UART_MCR_DTR) 448 modem_signals |= TIOCM_DTR; 449 if (info->mcr & UART_MCR_RTS) 450 modem_signals |= TIOCM_RTS; 451 452 return modem_signals; 453 } 454 455 static int whiteheat_tiocmset(struct tty_struct *tty, 456 unsigned int set, unsigned int clear) 457 { 458 struct usb_serial_port *port = tty->driver_data; 459 struct whiteheat_private *info = usb_get_serial_port_data(port); 460 461 if (set & TIOCM_RTS) 462 info->mcr |= UART_MCR_RTS; 463 if (set & TIOCM_DTR) 464 info->mcr |= UART_MCR_DTR; 465 466 if (clear & TIOCM_RTS) 467 info->mcr &= ~UART_MCR_RTS; 468 if (clear & TIOCM_DTR) 469 info->mcr &= ~UART_MCR_DTR; 470 471 firm_set_dtr(port, info->mcr & UART_MCR_DTR); 472 firm_set_rts(port, info->mcr & UART_MCR_RTS); 473 return 0; 474 } 475 476 477 static int whiteheat_ioctl(struct tty_struct *tty, 478 unsigned int cmd, unsigned long arg) 479 { 480 struct usb_serial_port *port = tty->driver_data; 481 struct serial_struct serstruct; 482 void __user *user_arg = (void __user *)arg; 483 484 switch (cmd) { 485 case TIOCGSERIAL: 486 memset(&serstruct, 0, sizeof(serstruct)); 487 serstruct.type = PORT_16654; 488 serstruct.line = port->minor; 489 serstruct.port = port->port_number; 490 serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); 491 serstruct.custom_divisor = 0; 492 serstruct.baud_base = 460800; 493 serstruct.close_delay = CLOSING_DELAY; 494 serstruct.closing_wait = CLOSING_DELAY; 495 496 if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) 497 return -EFAULT; 498 break; 499 default: 500 break; 501 } 502 503 return -ENOIOCTLCMD; 504 } 505 506 507 static void whiteheat_set_termios(struct tty_struct *tty, 508 struct usb_serial_port *port, struct ktermios *old_termios) 509 { 510 firm_setup_port(tty); 511 } 512 513 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) 514 { 515 struct usb_serial_port *port = tty->driver_data; 516 firm_set_break(port, break_state); 517 } 518 519 520 /***************************************************************************** 521 * Connect Tech's White Heat callback routines 522 *****************************************************************************/ 523 static void command_port_write_callback(struct urb *urb) 524 { 525 int status = urb->status; 526 527 if (status) { 528 dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); 529 return; 530 } 531 } 532 533 534 static void command_port_read_callback(struct urb *urb) 535 { 536 struct usb_serial_port *command_port = urb->context; 537 struct whiteheat_command_private *command_info; 538 int status = urb->status; 539 unsigned char *data = urb->transfer_buffer; 540 int result; 541 542 command_info = usb_get_serial_port_data(command_port); 543 if (!command_info) { 544 dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); 545 return; 546 } 547 if (!urb->actual_length) { 548 dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__); 549 return; 550 } 551 if (status) { 552 dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); 553 if (status != -ENOENT) 554 command_info->command_finished = WHITEHEAT_CMD_FAILURE; 555 wake_up(&command_info->wait_command); 556 return; 557 } 558 559 usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); 560 561 if (data[0] == WHITEHEAT_CMD_COMPLETE) { 562 command_info->command_finished = WHITEHEAT_CMD_COMPLETE; 563 wake_up(&command_info->wait_command); 564 } else if (data[0] == WHITEHEAT_CMD_FAILURE) { 565 command_info->command_finished = WHITEHEAT_CMD_FAILURE; 566 wake_up(&command_info->wait_command); 567 } else if (data[0] == WHITEHEAT_EVENT) { 568 /* These are unsolicited reports from the firmware, hence no 569 waiting command to wakeup */ 570 dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); 571 } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) && 572 (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) { 573 memcpy(command_info->result_buffer, &data[1], 574 urb->actual_length - 1); 575 command_info->command_finished = WHITEHEAT_CMD_COMPLETE; 576 wake_up(&command_info->wait_command); 577 } else 578 dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); 579 580 /* Continue trying to always read */ 581 result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); 582 if (result) 583 dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", 584 __func__, result); 585 } 586 587 588 /***************************************************************************** 589 * Connect Tech's White Heat firmware interface 590 *****************************************************************************/ 591 static int firm_send_command(struct usb_serial_port *port, __u8 command, 592 __u8 *data, __u8 datasize) 593 { 594 struct usb_serial_port *command_port; 595 struct whiteheat_command_private *command_info; 596 struct whiteheat_private *info; 597 struct device *dev = &port->dev; 598 __u8 *transfer_buffer; 599 int retval = 0; 600 int t; 601 602 dev_dbg(dev, "%s - command %d\n", __func__, command); 603 604 command_port = port->serial->port[COMMAND_PORT]; 605 command_info = usb_get_serial_port_data(command_port); 606 mutex_lock(&command_info->mutex); 607 command_info->command_finished = false; 608 609 transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; 610 transfer_buffer[0] = command; 611 memcpy(&transfer_buffer[1], data, datasize); 612 command_port->write_urb->transfer_buffer_length = datasize + 1; 613 retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); 614 if (retval) { 615 dev_dbg(dev, "%s - submit urb failed\n", __func__); 616 goto exit; 617 } 618 619 /* wait for the command to complete */ 620 t = wait_event_timeout(command_info->wait_command, 621 (bool)command_info->command_finished, COMMAND_TIMEOUT); 622 if (!t) 623 usb_kill_urb(command_port->write_urb); 624 625 if (command_info->command_finished == false) { 626 dev_dbg(dev, "%s - command timed out.\n", __func__); 627 retval = -ETIMEDOUT; 628 goto exit; 629 } 630 631 if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { 632 dev_dbg(dev, "%s - command failed.\n", __func__); 633 retval = -EIO; 634 goto exit; 635 } 636 637 if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { 638 dev_dbg(dev, "%s - command completed.\n", __func__); 639 switch (command) { 640 case WHITEHEAT_GET_DTR_RTS: 641 info = usb_get_serial_port_data(port); 642 memcpy(&info->mcr, command_info->result_buffer, 643 sizeof(struct whiteheat_dr_info)); 644 break; 645 } 646 } 647 exit: 648 mutex_unlock(&command_info->mutex); 649 return retval; 650 } 651 652 653 static int firm_open(struct usb_serial_port *port) 654 { 655 struct whiteheat_simple open_command; 656 657 open_command.port = port->port_number + 1; 658 return firm_send_command(port, WHITEHEAT_OPEN, 659 (__u8 *)&open_command, sizeof(open_command)); 660 } 661 662 663 static int firm_close(struct usb_serial_port *port) 664 { 665 struct whiteheat_simple close_command; 666 667 close_command.port = port->port_number + 1; 668 return firm_send_command(port, WHITEHEAT_CLOSE, 669 (__u8 *)&close_command, sizeof(close_command)); 670 } 671 672 673 static void firm_setup_port(struct tty_struct *tty) 674 { 675 struct usb_serial_port *port = tty->driver_data; 676 struct device *dev = &port->dev; 677 struct whiteheat_port_settings port_settings; 678 unsigned int cflag = tty->termios.c_cflag; 679 680 port_settings.port = port->port_number + 1; 681 682 /* get the byte size */ 683 switch (cflag & CSIZE) { 684 case CS5: port_settings.bits = 5; break; 685 case CS6: port_settings.bits = 6; break; 686 case CS7: port_settings.bits = 7; break; 687 default: 688 case CS8: port_settings.bits = 8; break; 689 } 690 dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); 691 692 /* determine the parity */ 693 if (cflag & PARENB) 694 if (cflag & CMSPAR) 695 if (cflag & PARODD) 696 port_settings.parity = WHITEHEAT_PAR_MARK; 697 else 698 port_settings.parity = WHITEHEAT_PAR_SPACE; 699 else 700 if (cflag & PARODD) 701 port_settings.parity = WHITEHEAT_PAR_ODD; 702 else 703 port_settings.parity = WHITEHEAT_PAR_EVEN; 704 else 705 port_settings.parity = WHITEHEAT_PAR_NONE; 706 dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); 707 708 /* figure out the stop bits requested */ 709 if (cflag & CSTOPB) 710 port_settings.stop = 2; 711 else 712 port_settings.stop = 1; 713 dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); 714 715 /* figure out the flow control settings */ 716 if (cflag & CRTSCTS) 717 port_settings.hflow = (WHITEHEAT_HFLOW_CTS | 718 WHITEHEAT_HFLOW_RTS); 719 else 720 port_settings.hflow = WHITEHEAT_HFLOW_NONE; 721 dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, 722 (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", 723 (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", 724 (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", 725 (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); 726 727 /* determine software flow control */ 728 if (I_IXOFF(tty)) 729 port_settings.sflow = WHITEHEAT_SFLOW_RXTX; 730 else 731 port_settings.sflow = WHITEHEAT_SFLOW_NONE; 732 dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); 733 734 port_settings.xon = START_CHAR(tty); 735 port_settings.xoff = STOP_CHAR(tty); 736 dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); 737 738 /* get the baud rate wanted */ 739 port_settings.baud = tty_get_baud_rate(tty); 740 dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); 741 742 /* fixme: should set validated settings */ 743 tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); 744 /* handle any settings that aren't specified in the tty structure */ 745 port_settings.lloop = 0; 746 747 /* now send the message to the device */ 748 firm_send_command(port, WHITEHEAT_SETUP_PORT, 749 (__u8 *)&port_settings, sizeof(port_settings)); 750 } 751 752 753 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) 754 { 755 struct whiteheat_set_rdb rts_command; 756 757 rts_command.port = port->port_number + 1; 758 rts_command.state = onoff; 759 return firm_send_command(port, WHITEHEAT_SET_RTS, 760 (__u8 *)&rts_command, sizeof(rts_command)); 761 } 762 763 764 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) 765 { 766 struct whiteheat_set_rdb dtr_command; 767 768 dtr_command.port = port->port_number + 1; 769 dtr_command.state = onoff; 770 return firm_send_command(port, WHITEHEAT_SET_DTR, 771 (__u8 *)&dtr_command, sizeof(dtr_command)); 772 } 773 774 775 static int firm_set_break(struct usb_serial_port *port, __u8 onoff) 776 { 777 struct whiteheat_set_rdb break_command; 778 779 break_command.port = port->port_number + 1; 780 break_command.state = onoff; 781 return firm_send_command(port, WHITEHEAT_SET_BREAK, 782 (__u8 *)&break_command, sizeof(break_command)); 783 } 784 785 786 static int firm_purge(struct usb_serial_port *port, __u8 rxtx) 787 { 788 struct whiteheat_purge purge_command; 789 790 purge_command.port = port->port_number + 1; 791 purge_command.what = rxtx; 792 return firm_send_command(port, WHITEHEAT_PURGE, 793 (__u8 *)&purge_command, sizeof(purge_command)); 794 } 795 796 797 static int firm_get_dtr_rts(struct usb_serial_port *port) 798 { 799 struct whiteheat_simple get_dr_command; 800 801 get_dr_command.port = port->port_number + 1; 802 return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, 803 (__u8 *)&get_dr_command, sizeof(get_dr_command)); 804 } 805 806 807 static int firm_report_tx_done(struct usb_serial_port *port) 808 { 809 struct whiteheat_simple close_command; 810 811 close_command.port = port->port_number + 1; 812 return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, 813 (__u8 *)&close_command, sizeof(close_command)); 814 } 815 816 817 /***************************************************************************** 818 * Connect Tech's White Heat utility functions 819 *****************************************************************************/ 820 static int start_command_port(struct usb_serial *serial) 821 { 822 struct usb_serial_port *command_port; 823 struct whiteheat_command_private *command_info; 824 int retval = 0; 825 826 command_port = serial->port[COMMAND_PORT]; 827 command_info = usb_get_serial_port_data(command_port); 828 mutex_lock(&command_info->mutex); 829 if (!command_info->port_running) { 830 /* Work around HCD bugs */ 831 usb_clear_halt(serial->dev, command_port->read_urb->pipe); 832 833 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); 834 if (retval) { 835 dev_err(&serial->dev->dev, 836 "%s - failed submitting read urb, error %d\n", 837 __func__, retval); 838 goto exit; 839 } 840 } 841 command_info->port_running++; 842 843 exit: 844 mutex_unlock(&command_info->mutex); 845 return retval; 846 } 847 848 849 static void stop_command_port(struct usb_serial *serial) 850 { 851 struct usb_serial_port *command_port; 852 struct whiteheat_command_private *command_info; 853 854 command_port = serial->port[COMMAND_PORT]; 855 command_info = usb_get_serial_port_data(command_port); 856 mutex_lock(&command_info->mutex); 857 command_info->port_running--; 858 if (!command_info->port_running) 859 usb_kill_urb(command_port->read_urb); 860 mutex_unlock(&command_info->mutex); 861 } 862 863 module_usb_serial_driver(serial_drivers, id_table_combined); 864 865 MODULE_AUTHOR(DRIVER_AUTHOR); 866 MODULE_DESCRIPTION(DRIVER_DESC); 867 MODULE_LICENSE("GPL"); 868 869 MODULE_FIRMWARE("whiteheat.fw"); 870 MODULE_FIRMWARE("whiteheat_loader.fw"); 871