1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * spcp8x5 USB to serial adaptor driver 4 * 5 * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com) 6 * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) 7 * Copyright (C) 2006 S1 Corp. 8 * 9 * Original driver for 2.6.10 pl2303 driver by 10 * Greg Kroah-Hartman (greg@kroah.com) 11 * Changes for 2.6.20 by Harald Klein <hari@vt100.at> 12 */ 13 #include <linux/kernel.h> 14 #include <linux/errno.h> 15 #include <linux/slab.h> 16 #include <linux/tty.h> 17 #include <linux/tty_driver.h> 18 #include <linux/tty_flip.h> 19 #include <linux/module.h> 20 #include <linux/spinlock.h> 21 #include <linux/usb.h> 22 #include <linux/usb/serial.h> 23 24 #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" 25 26 #define SPCP825_QUIRK_NO_UART_STATUS 0x01 27 #define SPCP825_QUIRK_NO_WORK_MODE 0x02 28 29 #define SPCP8x5_007_VID 0x04FC 30 #define SPCP8x5_007_PID 0x0201 31 #define SPCP8x5_008_VID 0x04fc 32 #define SPCP8x5_008_PID 0x0235 33 #define SPCP8x5_PHILIPS_VID 0x0471 34 #define SPCP8x5_PHILIPS_PID 0x081e 35 #define SPCP8x5_INTERMATIC_VID 0x04FC 36 #define SPCP8x5_INTERMATIC_PID 0x0204 37 #define SPCP8x5_835_VID 0x04fc 38 #define SPCP8x5_835_PID 0x0231 39 40 static const struct usb_device_id id_table[] = { 41 { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, 42 { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, 43 { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, 44 { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, 45 { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID), 46 .driver_info = SPCP825_QUIRK_NO_UART_STATUS | 47 SPCP825_QUIRK_NO_WORK_MODE }, 48 { } /* Terminating entry */ 49 }; 50 MODULE_DEVICE_TABLE(usb, id_table); 51 52 struct spcp8x5_usb_ctrl_arg { 53 u8 type; 54 u8 cmd; 55 u8 cmd_type; 56 u16 value; 57 u16 index; 58 u16 length; 59 }; 60 61 62 /* spcp8x5 spec register define */ 63 #define MCR_CONTROL_LINE_RTS 0x02 64 #define MCR_CONTROL_LINE_DTR 0x01 65 #define MCR_DTR 0x01 66 #define MCR_RTS 0x02 67 68 #define MSR_STATUS_LINE_DCD 0x80 69 #define MSR_STATUS_LINE_RI 0x40 70 #define MSR_STATUS_LINE_DSR 0x20 71 #define MSR_STATUS_LINE_CTS 0x10 72 73 /* verdor command here , we should define myself */ 74 #define SET_DEFAULT 0x40 75 #define SET_DEFAULT_TYPE 0x20 76 77 #define SET_UART_FORMAT 0x40 78 #define SET_UART_FORMAT_TYPE 0x21 79 #define SET_UART_FORMAT_SIZE_5 0x00 80 #define SET_UART_FORMAT_SIZE_6 0x01 81 #define SET_UART_FORMAT_SIZE_7 0x02 82 #define SET_UART_FORMAT_SIZE_8 0x03 83 #define SET_UART_FORMAT_STOP_1 0x00 84 #define SET_UART_FORMAT_STOP_2 0x04 85 #define SET_UART_FORMAT_PAR_NONE 0x00 86 #define SET_UART_FORMAT_PAR_ODD 0x10 87 #define SET_UART_FORMAT_PAR_EVEN 0x30 88 #define SET_UART_FORMAT_PAR_MASK 0xD0 89 #define SET_UART_FORMAT_PAR_SPACE 0x90 90 91 #define GET_UART_STATUS_TYPE 0xc0 92 #define GET_UART_STATUS 0x22 93 #define GET_UART_STATUS_MSR 0x06 94 95 #define SET_UART_STATUS 0x40 96 #define SET_UART_STATUS_TYPE 0x23 97 #define SET_UART_STATUS_MCR 0x0004 98 #define SET_UART_STATUS_MCR_DTR 0x01 99 #define SET_UART_STATUS_MCR_RTS 0x02 100 #define SET_UART_STATUS_MCR_LOOP 0x10 101 102 #define SET_WORKING_MODE 0x40 103 #define SET_WORKING_MODE_TYPE 0x24 104 #define SET_WORKING_MODE_U2C 0x00 105 #define SET_WORKING_MODE_RS485 0x01 106 #define SET_WORKING_MODE_PDMA 0x02 107 #define SET_WORKING_MODE_SPP 0x03 108 109 #define SET_FLOWCTL_CHAR 0x40 110 #define SET_FLOWCTL_CHAR_TYPE 0x25 111 112 #define GET_VERSION 0xc0 113 #define GET_VERSION_TYPE 0x26 114 115 #define SET_REGISTER 0x40 116 #define SET_REGISTER_TYPE 0x27 117 118 #define GET_REGISTER 0xc0 119 #define GET_REGISTER_TYPE 0x28 120 121 #define SET_RAM 0x40 122 #define SET_RAM_TYPE 0x31 123 124 #define GET_RAM 0xc0 125 #define GET_RAM_TYPE 0x32 126 127 /* how come ??? */ 128 #define UART_STATE 0x08 129 #define UART_STATE_TRANSIENT_MASK 0x75 130 #define UART_DCD 0x01 131 #define UART_DSR 0x02 132 #define UART_BREAK_ERROR 0x04 133 #define UART_RING 0x08 134 #define UART_FRAME_ERROR 0x10 135 #define UART_PARITY_ERROR 0x20 136 #define UART_OVERRUN_ERROR 0x40 137 #define UART_CTS 0x80 138 139 struct spcp8x5_private { 140 unsigned quirks; 141 spinlock_t lock; 142 u8 line_control; 143 }; 144 145 static int spcp8x5_probe(struct usb_serial *serial, 146 const struct usb_device_id *id) 147 { 148 usb_set_serial_data(serial, (void *)id); 149 150 return 0; 151 } 152 153 static int spcp8x5_port_probe(struct usb_serial_port *port) 154 { 155 const struct usb_device_id *id = usb_get_serial_data(port->serial); 156 struct spcp8x5_private *priv; 157 158 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 159 if (!priv) 160 return -ENOMEM; 161 162 spin_lock_init(&priv->lock); 163 priv->quirks = id->driver_info; 164 165 usb_set_serial_port_data(port, priv); 166 167 port->port.drain_delay = 256; 168 169 return 0; 170 } 171 172 static void spcp8x5_port_remove(struct usb_serial_port *port) 173 { 174 struct spcp8x5_private *priv; 175 176 priv = usb_get_serial_port_data(port); 177 kfree(priv); 178 } 179 180 static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr) 181 { 182 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 183 struct usb_device *dev = port->serial->dev; 184 int retval; 185 186 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) 187 return -EPERM; 188 189 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 190 SET_UART_STATUS_TYPE, SET_UART_STATUS, 191 mcr, 0x04, NULL, 0, 100); 192 if (retval != 0) { 193 dev_err(&port->dev, "failed to set control lines: %d\n", 194 retval); 195 } 196 return retval; 197 } 198 199 static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status) 200 { 201 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 202 struct usb_device *dev = port->serial->dev; 203 u8 *buf; 204 int ret; 205 206 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) 207 return -EPERM; 208 209 buf = kzalloc(1, GFP_KERNEL); 210 if (!buf) 211 return -ENOMEM; 212 213 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 214 GET_UART_STATUS, GET_UART_STATUS_TYPE, 215 0, GET_UART_STATUS_MSR, buf, 1, 100); 216 if (ret < 1) { 217 dev_err(&port->dev, "failed to get modem status: %d\n", ret); 218 if (ret >= 0) 219 ret = -EIO; 220 goto out; 221 } 222 223 dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf); 224 *status = *buf; 225 ret = 0; 226 out: 227 kfree(buf); 228 229 return ret; 230 } 231 232 static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value, 233 u16 index) 234 { 235 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 236 struct usb_device *dev = port->serial->dev; 237 int ret; 238 239 if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE) 240 return; 241 242 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 243 SET_WORKING_MODE_TYPE, SET_WORKING_MODE, 244 value, index, NULL, 0, 100); 245 dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index); 246 if (ret < 0) 247 dev_err(&port->dev, "failed to set work mode: %d\n", ret); 248 } 249 250 static int spcp8x5_carrier_raised(struct usb_serial_port *port) 251 { 252 u8 msr; 253 int ret; 254 255 ret = spcp8x5_get_msr(port, &msr); 256 if (ret || msr & MSR_STATUS_LINE_DCD) 257 return 1; 258 259 return 0; 260 } 261 262 static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) 263 { 264 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 265 unsigned long flags; 266 u8 control; 267 268 spin_lock_irqsave(&priv->lock, flags); 269 if (on) 270 priv->line_control = MCR_CONTROL_LINE_DTR 271 | MCR_CONTROL_LINE_RTS; 272 else 273 priv->line_control &= ~ (MCR_CONTROL_LINE_DTR 274 | MCR_CONTROL_LINE_RTS); 275 control = priv->line_control; 276 spin_unlock_irqrestore(&priv->lock, flags); 277 spcp8x5_set_ctrl_line(port, control); 278 } 279 280 static void spcp8x5_init_termios(struct tty_struct *tty) 281 { 282 tty_encode_baud_rate(tty, 115200, 115200); 283 } 284 285 static void spcp8x5_set_termios(struct tty_struct *tty, 286 struct usb_serial_port *port, struct ktermios *old_termios) 287 { 288 struct usb_serial *serial = port->serial; 289 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 290 unsigned long flags; 291 unsigned int cflag = tty->termios.c_cflag; 292 unsigned short uartdata; 293 unsigned char buf[2] = {0, 0}; 294 int baud; 295 int i; 296 u8 control; 297 298 /* check that they really want us to change something */ 299 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) 300 return; 301 302 /* set DTR/RTS active */ 303 spin_lock_irqsave(&priv->lock, flags); 304 control = priv->line_control; 305 if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { 306 priv->line_control |= MCR_DTR; 307 if (!(old_termios->c_cflag & CRTSCTS)) 308 priv->line_control |= MCR_RTS; 309 } 310 if (control != priv->line_control) { 311 control = priv->line_control; 312 spin_unlock_irqrestore(&priv->lock, flags); 313 spcp8x5_set_ctrl_line(port, control); 314 } else { 315 spin_unlock_irqrestore(&priv->lock, flags); 316 } 317 318 /* Set Baud Rate */ 319 baud = tty_get_baud_rate(tty); 320 switch (baud) { 321 case 300: buf[0] = 0x00; break; 322 case 600: buf[0] = 0x01; break; 323 case 1200: buf[0] = 0x02; break; 324 case 2400: buf[0] = 0x03; break; 325 case 4800: buf[0] = 0x04; break; 326 case 9600: buf[0] = 0x05; break; 327 case 19200: buf[0] = 0x07; break; 328 case 38400: buf[0] = 0x09; break; 329 case 57600: buf[0] = 0x0a; break; 330 case 115200: buf[0] = 0x0b; break; 331 case 230400: buf[0] = 0x0c; break; 332 case 460800: buf[0] = 0x0d; break; 333 case 921600: buf[0] = 0x0e; break; 334 /* case 1200000: buf[0] = 0x0f; break; */ 335 /* case 2400000: buf[0] = 0x10; break; */ 336 case 3000000: buf[0] = 0x11; break; 337 /* case 6000000: buf[0] = 0x12; break; */ 338 case 0: 339 case 1000000: 340 buf[0] = 0x0b; break; 341 default: 342 dev_err(&port->dev, "unsupported baudrate, using 9600\n"); 343 } 344 345 /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ 346 switch (cflag & CSIZE) { 347 case CS5: 348 buf[1] |= SET_UART_FORMAT_SIZE_5; 349 break; 350 case CS6: 351 buf[1] |= SET_UART_FORMAT_SIZE_6; 352 break; 353 case CS7: 354 buf[1] |= SET_UART_FORMAT_SIZE_7; 355 break; 356 default: 357 case CS8: 358 buf[1] |= SET_UART_FORMAT_SIZE_8; 359 break; 360 } 361 362 /* Set Stop bit2 : 0:1bit 1:2bit */ 363 buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : 364 SET_UART_FORMAT_STOP_1; 365 366 /* Set Parity bit3-4 01:Odd 11:Even */ 367 if (cflag & PARENB) { 368 buf[1] |= (cflag & PARODD) ? 369 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; 370 } else { 371 buf[1] |= SET_UART_FORMAT_PAR_NONE; 372 } 373 uartdata = buf[0] | buf[1]<<8; 374 375 i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 376 SET_UART_FORMAT_TYPE, SET_UART_FORMAT, 377 uartdata, 0, NULL, 0, 100); 378 if (i < 0) 379 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", 380 uartdata, i); 381 dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i); 382 383 if (cflag & CRTSCTS) { 384 /* enable hardware flow control */ 385 spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C); 386 } 387 } 388 389 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) 390 { 391 struct usb_serial *serial = port->serial; 392 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 393 int ret; 394 395 usb_clear_halt(serial->dev, port->write_urb->pipe); 396 usb_clear_halt(serial->dev, port->read_urb->pipe); 397 398 ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 399 0x09, 0x00, 400 0x01, 0x00, NULL, 0x00, 100); 401 if (ret) 402 return ret; 403 404 spcp8x5_set_ctrl_line(port, priv->line_control); 405 406 if (tty) 407 spcp8x5_set_termios(tty, port, NULL); 408 409 return usb_serial_generic_open(tty, port); 410 } 411 412 static int spcp8x5_tiocmset(struct tty_struct *tty, 413 unsigned int set, unsigned int clear) 414 { 415 struct usb_serial_port *port = tty->driver_data; 416 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 417 unsigned long flags; 418 u8 control; 419 420 spin_lock_irqsave(&priv->lock, flags); 421 if (set & TIOCM_RTS) 422 priv->line_control |= MCR_RTS; 423 if (set & TIOCM_DTR) 424 priv->line_control |= MCR_DTR; 425 if (clear & TIOCM_RTS) 426 priv->line_control &= ~MCR_RTS; 427 if (clear & TIOCM_DTR) 428 priv->line_control &= ~MCR_DTR; 429 control = priv->line_control; 430 spin_unlock_irqrestore(&priv->lock, flags); 431 432 return spcp8x5_set_ctrl_line(port, control); 433 } 434 435 static int spcp8x5_tiocmget(struct tty_struct *tty) 436 { 437 struct usb_serial_port *port = tty->driver_data; 438 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 439 unsigned long flags; 440 unsigned int mcr; 441 u8 status; 442 unsigned int result; 443 444 result = spcp8x5_get_msr(port, &status); 445 if (result) 446 return result; 447 448 spin_lock_irqsave(&priv->lock, flags); 449 mcr = priv->line_control; 450 spin_unlock_irqrestore(&priv->lock, flags); 451 452 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) 453 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) 454 | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) 455 | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) 456 | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) 457 | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); 458 459 return result; 460 } 461 462 static struct usb_serial_driver spcp8x5_device = { 463 .driver = { 464 .owner = THIS_MODULE, 465 .name = "SPCP8x5", 466 }, 467 .id_table = id_table, 468 .num_ports = 1, 469 .num_bulk_in = 1, 470 .num_bulk_out = 1, 471 .open = spcp8x5_open, 472 .dtr_rts = spcp8x5_dtr_rts, 473 .carrier_raised = spcp8x5_carrier_raised, 474 .set_termios = spcp8x5_set_termios, 475 .init_termios = spcp8x5_init_termios, 476 .tiocmget = spcp8x5_tiocmget, 477 .tiocmset = spcp8x5_tiocmset, 478 .probe = spcp8x5_probe, 479 .port_probe = spcp8x5_port_probe, 480 .port_remove = spcp8x5_port_remove, 481 }; 482 483 static struct usb_serial_driver * const serial_drivers[] = { 484 &spcp8x5_device, NULL 485 }; 486 487 module_usb_serial_driver(serial_drivers, id_table); 488 489 MODULE_DESCRIPTION(DRIVER_DESC); 490 MODULE_LICENSE("GPL"); 491